3590-B1A to 3590-E1A

We will be doing an update to our tape drives around the end of the month. I've looked over the older messages concerning this and all I saw was a dilemma about microcode levels. The messages were dated the last part of 1999, so I would image that the microcode has been updated since then.

Re: 3590-B1A to 3590-E1A

Will the 3590E write to the J's as 256 tracks? -Original Message- From: Prather, Wanda [mailto:[EMAIL PROTECTED]] Sent: Wednesday, April 04, 2001 2:23 PM To: [EMAIL PROTECTED] Subject: Re: 3590-B1A to 3590-E1A Ditto. No problem with J's &K's together. And the 3590E's read and write the

3590-B1A to 3590-E1A, Part II

Ok, I've looked over some more info and some comments that I've got. We are running (1) 3494 library with (2) 3590-B1A drives attached to an IBM Netfinity 7000 M10 server running WinNT4 SP5, TSM version 3.7.3. I'm thinking of having the CE convert both drives to the E1A v

3.7 to 4.1 and the license issue

Can someone explain just what the change in licensing is all about? We need to do the 3.7 to 4.1 update soon. We have 75 licenses running right now in version 3.7. Am I going to lose these and have to start from scratch? David Tyree Microcomputer Specialist South Georgia Medical Center 2

Web client access on a Cluster server

We are running a 3.7.2 server on a WinNT 4 sp5 machine talking to a 4.1.2 client on a Win2k sp2 Cluster server. All the backups and the restores on the cluster server are fine. The problem is that we can't get the web client piece to work on all the nodes. The only way I can do res

Bad tape

Is there a procedure to replace the data on a tape that has went bad? We use 3590 tapes on our AS/400 side and they are known to break the tape or just become unusable for some reason. We haven't had a bad tape on the PC side yet. We use a library that has the tapepool tapes in it

Several tapes with zero capacity and zero utilization

I'm new with the ADSM system, so I hope I don't sound to dumb here! I've been looking at the list for a couple of months and I've gotten a lot of good information from it so far. Here we go, I run a select command every few days to check on the number of reclaimable tapes we have i

Re: Several tapes with zero capacity and zero utilization

PROTECTED] Subject: Re: Several tapes with zero capacity and zero utilization They are probably pending, do a q vol status=pending and see if the list matches your zero capacity tapes. On Wednesday, October 18, 2000 7:10 AM, Tyree, David [SMTP:[EMAIL PROTECTED]] wrote: > I'm new with

Re: Several tapes with zero capacity and zero utilization

That sounds like an excellent idea. At the moment we are running short on tapes until we get a new batch in. Do you know of an _easy_ way to tell just how many scratch tapes we have? We are using select statements using the info in the volumes table. The problem is the tapes only show in stgpool

Exchange 5.5 mailbox restore

We are trying to restore a mailbox on the Exchange server. I have looked all the documentation I can find and I'm stumped on the problem we are having. Here's the situation, the live server is WinNT 4.0 SP5 running Exchange 5.5 SP3. We are trying to restore the data to another temp

Exclude-Include question

I still pretty new to our ADSM system and some of the settings are still confusing to me. One thing I'm trying to do is to backup just the contents of one directory on a server. The database on the server (WinNT4) does it's own database dumps at certain times during the day. All we

Expanding our system

We currently have a 3494 library with two 3490E1A drives attached to a WinNT4 box running quad Xeon 550's and a gig of RAM. TSM is version 4.2. We have about 30-40gig of data coming in over about an eight hour time window each evening and night. Things are fine for now. We are looking

Re: Keeping an handle on client systems' large drives

*.gho are image files produced by the Ghost program from Symantec. I think *.nrg files are something to do with CD burning programs, something like an *.iso file. *.rm is an audio/video file from RealAudio -Original Message- From: Prather, Wanda [mailto:[EMAIL PROTECTED]] Sent: Friday, Ju

End of Service for Server 4.2

Does any one know what the end of service for TSM Server version 4.2 is? I looked at the Tivoli website and it's not listed. I thought I heard something about it going out at the end of the year. I know that 4.1 goes out 6-30-2002. David Tyree Microcomputer Specialist S

List of tapes in vault

Does anyone have a easy way to find out which tapes are supposed to be in the vault? I need to check every so often to make sure the operator is bringing back the tapes correctly. I'm not sure if the following is correct: select volume_name as "Tape Number" from drmedia where state='VAULT

Installing TDP for SQL 2.2

We are trying to install the TDP for SQL version 2.2 on to a WinNT4 machine running MS-SQL. So far we have the client (version 4.2.1.20) installed to catch all the non SQL files. It's set up to be called by the TSM server to run and it's doing fine. All the non SQL backups are fine. We

FW: Installing TDP for SQL 2.2

nstalling TDP for SQL 2.2 David, Make sure that script name in the schedule is identical to the name of the script on the NT box. Check the .extension of the script. Bill - Original Message - From: "Tyree, David" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday,

FW: Installing TDP for SQL 2.2

Team Hermitage Site Tech Deloitte & Touche USA LLP 615.882.6861 -Original Message- From: Tyree, David [mailto:[EMAIL PROTECTED]] Sent: Monday, April 22, 2002 12:58 PM To: [EMAIL PROTECTED] Subject: Installing TDP for SQL 2.2 We are trying to install the TDP for SQL versi

Re: Installing TDP for SQL 2.2

EMAIL PROTECTED]> To: [EMAIL PROTECTED] cc: Subject: Re: Installing TDP for SQL 2.2 David, What do the parameters of your schedule look like on the TSM server?? Matt Adams Tivoli Storage Manager Team Hermitage Site Tech Deloitte & Touche USA LLP 615.882.6861 -Original Message---

Client for VMS on a Digital Alpha box

We have an older Digital Alpha box (4+ years) that we are going to load VMS onto one day soon. Does TSM have a client to back this thing up? I've looked around the Tivoli web site but I didn't see it. Am I blind? We are running TSM 4.1 on the backup server so I imagine that most an

Re: Client for VMS on a Digital Alpha box

EMAIL PROTECTED] > -Original Message- > From: Tyree, David [SMTP:[EMAIL PROTECTED]] > Sent: Monday, September 03, 2001 11:20 AM > To: [EMAIL PROTECTED] > Subject: Client for VMS on a Digital Alpha box > > We have an older Digital Alpha box (4+ years) that

TDP for SQL question

We have a situation where we are trying setup a test SQL database on a server. The server (WinNT4 w/TSM client 3.7.2 and SQL client 1.1.2 and MS-SQL 6.5) itself is cramped for space and we need to make a copy of the database so that we can do some testing and still keep the product

Dumb Exchange question

We will be upgrading to the new TDP for Exchange 2.2 from version 1.1 some time after the first of the year and we are wondering if the newer version supports individual mailbox recovery. I know the 1.1 version didn't easily support mailbox recovery, you had to build a new Exchange box, du

Client install on a MS Cluster with SQL 2000

We will be setting up a new cluster server running Win2k and MS SQL 2000. We are at 5.1 on our TSM server. We are backing up another cluster server running the same OS but without any SQL on it. And we are backing up SQL 2000 running on a non-cluster server. Both have the n

Restoring NT file security settings

We have a Win2k server that has 75+ shares based on the hospital department that uses it. The security on the folders is configured so that users can only access there own department's folder. And, depending on the user, they can only do certain things within each folder. The director o

strange reclaimation behavor

I have something strange going on with my reclaimations. I have the system issue a command in the afternoons to start reclaiming tapes by dropping the levels to 60%. I then have it issue another command around midnight to raise the levels back to 100%. When I get here in th

Centera Boxes

I looked around in the archives here and found info on backing TO a Centera box but nothing about backing up the data FROM a Centera box. We are in the process of migrating assorted files on to our box and we need to see about backing up the data we move onto it. We are awa

curious behavior

(Running TSM 5.2.2 on Win2k with 4 LTO2 drives in a Powervault 136T) I've been seeing this for quite a while on our system. It's not an issue but it sure does look strange. Unless I'm missing something here, if you are running a process that is copying data from the tapepool to the copypool

Re: curious behavior

I just rechecked things with the comments from the list. It seems the current access level of the tape didn't have any bearing on the situation. Right now I have a q mo showing one tape as R/W and the other as R/O. The q vol f=d is telling me that both tapes are Read/Write. tsm: BACKUP1>q pr P

automated select statement

I'm trying to send the results of a select statement to a text file within TSM as a scheduled job. It works just fine if I run it from the console. If I try to schedule it within TSM then it will fail: tsm: BACKUP1>run make_get ANR2913E Invalid SQL identifi

Re: automated select statement

ger [mailto:[EMAIL PROTECTED] On Behalf Of Andy Carlson Sent: Wednesday, April 13, 2005 1:45 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] automated select statement Try taking the redirection out of the script, and put it on the run line. Tyree, David wrote: > I'm tryin

TSM Support Technical Exchange webinars

I was looking around at the webinars on the Support Technical Exchange website and I don't see anything listed for next year. Does anyone know if they will be having any more of them? David Tyree Enterprise Backup Administrator South Georgia Medical Center 229.3

Re: TSM Support Technical Exchange webinars

Dec 19, 2005, at 3:35 PM, Tyree, David wrote: > I was looking around at the webinars on the Support > Technical Exchange website and I don't see anything listed for next > year. > > Does anyone know if they will be having any more of them? David - Your

TSM Reporting tools

I'm looking for some tools that will allow me to track the data coming in from each node and then allow me to see trends. Throwing the info into a spreadsheet and then accessing it through a web interface would be good. I also would like to generate other rep

DSM.OPT file

I've got a question about the usage of the "TCPSERVERADDRESS" line in the dsm.opt file on the clients. Currently I have the IP address of the TSM server listed in the dsm.opt file on the clients. We will be implementing a new addressing scheme for all of our servers in a co

TSM and Centera

We have an EMC Centera that we have data on that we would like to protect from "disaster". One option is to get another Centera and put it another location and then just duplicate the data from one to the other. Another option is to backup the Centera with TS

Re: TSM and Centera

I think we have a misunderstanding here. I want the Centera box to be just another client. I have assorted medical records that are being written to the Centera box by different systems for storage and recall as needed by the medical systems. I would like to provide additional protection for the

OT? TSM in a hospital environment

Are there any folks on the list that are using TSM in a hospital? Sometimes we have to battle with some of our software venders to allow us to backup their system using TSM. Sometimes they will tell us that the system is FDA approved as is and must be backed up using a bui

Re: OT? TSM in a hospital environment

4206 -----Original Message- From: Tyree, David [mailto:[EMAIL PROTECTED] Sent: Monday, June 19, 2006 11:29 AM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] OT? TSM in a hospital environment Are there any folks on the list that are using TSM in a hospital? Sometimes

testing an assumption here

TSM 5.3 server running on W2k server and a TSM 5.2.3 client running on a W2k box. On the client I'm getting about 20+ gig of bytes transferred during each backup. Only problem is that the server only has about 8-10 gig of data on the entire thing. The bytes tr

SQL TDP error message

TSM server running 5.3.2 on a Win2k box. We have put in a new server in running Windows 2003R2 Standard Edition and SQL 2005. I installed TSM client 5.3.2 and got it configured with no problem. I then installed the TDP for SQL 5.2.1.0.

Re: SQL TDP error message

All fixed, thanks -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Del Hoobler Sent: Thursday, January 04, 2007 8:53 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] SQL TDP error message David, Go to: http://www.ibm.com/us/ and search fo

Very slow backups of Exchange 5.5 with tpdexcc

We are running Exchange 5.5 on a box running Win2k Sp2, 1.1 GHz x2 with 2.6 gig ram, TSM version 5.1.5.2, and TDP version 5.1.5.0. It's talking a TSM server running 5.1.6. The backups are normally ran via a batch file using the command line program with the switches we wan

Looking for 3590 tape supplier

We need to get some more 3590K tapes for our library and our regular supplier is not able to help us right now. All we need is 30 new tapes to tide us over while we migrate to LTO-2. Any suggestions? David Tyree Enterprise Backup Administrator South Georgia Medical Cen

3494 library with unusable accessor

I came in this morning and found that the accessor in the library was down. I have a call in for service so at least it will be worked on shortly. In the mean time, I can't remember for the life of me how to run the system by hand. I'm running TSM 5.1.6 on win2k. The librar

Windows NT4 and TSM client

We have some older WinNT4 servers still hanging around and I want to update them to the newest possible TSM client. All of our newer Win2k and Win2k3 servers are running some flavor of version 5.2+ currently. If I attempt to install that one on a NT4 box I get an error mess

deduplication status

I've searched the archives but I can't really find the answer I'm looking for. Running on version 6.3.1.0. I have a primary storage pool running dedup. I run the "ID DEDUP" command, the reclamation command, and the expiration command throughout the

corrupted db on test system

We are running TSM v6.3.1 on a test box and we had a drive fail and it has a corrupted database now and won't start. I did the "dsmserv remove db tsmdb1" to get rid of the old database and now I'm about to start the actual database restore. While I

Re: corrupted db on test system

I manually put the tape in the library and then did some hacking around in the devconfig file to tell TSM just where the tape was. Fired off the restore db command again and I saw the library mount the correct tape. Now I'm seeing a db restore running so I think I'm in business now. I under

Re: corrupted db on test system

y means... Any suggestions? David Tyree  System Administrator  South Georgia Medical Center 229.333.1155 -Original Message----- From: Tyree, David Sent: Thursday, November 13, 2014 16:23 To: 'ADSM: Dist Stor Manager' Subject: RE: corrupted db on test system I manually put the tap

Re: corrupted db on test system

U] On Behalf Of Tyree, David Sent: maandag 17 november 2014 15:06 To: ADSM-L@VM.MARIST.EDU Subject: Re: corrupted db on test system I guess I'm further along but after I got the database restored I tried to restart the TSM box and it's not coming up. I'm getting: ANR0238E A datab

Re: corrupted db on test system

ginal Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Tyree, David Sent: maandag 17 november 2014 16:38 To: ADSM-L@VM.MARIST.EDU Subject: Re: corrupted db on test system Since Friday afternoon. I'm pretty sure it should be done by now... David Tyr

Re: Printing labels locally for LTO tapes (physically)

We have used this site in the past, actually back when it was completely free. http://www.mytapelabels.com/ we use Avery 6577 labels in our HP color laser and they are crisp and they stick like crazy. David Tyree  System Administrator  South Georgia Medical Center 229.333.1155 -Orig

Re: TSM backup speed on a Windows server

In our case, we set the speed to the highest speed supported by the port on the switch and the server. If either side is set to auto then we end up with really poor performance. But not in every case, we have a couple of boxes that are set to auto and they are running just fine. Try different

TSM client for a NAS

We are looking to buy a NAS for a particular project, an HP ProLiant DL100G2. According to the data sheet it's running Windows Storage Server 2003. That sounds like a regular Windows TSM client would be just fine. Am I right here? David Tyree Enterprise

Vista oddness

We are testing Vista and I'm seeing something odd. TSM seems to want to do almost a full backup every time it runs automatically. I'm running the 5.5.0 client on a VMware (6.0) Vista Ultimate box that is talking to a TSM server running 5.4.1 on Windows. The b

Re: Vista oddness

ime select System STate as well as the C: drive, see if the results change... And please post back the results! On 12/6/07, Tyree, David <[EMAIL PROTECTED]> wrote: > >We are testing Vista and I'm seeing something odd. TSM seems > to want to do almost a full backup ev

Re: Vista oddness

! On 12/6/07, Tyree, David <[EMAIL PROTECTED]> wrote: > >We are testing Vista and I'm seeing something odd. TSM seems > to want to do almost a full backup every time it runs automatically. > >I'm running the 5.5.0 client on a VMware (6.0)

end of support for TSM ver5.5?

Anybody have a guess on when EOS for TSM 5.5 will occur? David Tyree Interface Analyst South Georgia Medical Center 229.333.1155 Confidential Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential

Re: end of support for TSM ver5.5?

To: ADSM-L@VM.MARIST.EDU Date: 04/07/2009 06:47 AM Subject:Re: [ADSM-L] end of support for TSM ver5.5? On Apr 7, 2009, at 9:28 AM, Tyree, David wrote: >Anybody have a guess on when EOS for TSM 5.5 will occur? > http://www.ibm.com/software/sysmgmt

Re: Cloned Win servers and multiple backups

I think this only work if you had open registration. -Original Message- From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Len Boyle Sent: Tuesday, May 05, 2009 9:09 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Cloned Win servers and multiple backups Rick, If

dumb question about v6.1

I ordered the v6.1 package from Passport Advantage and I was looking it over and noticed something odd. I'm currently running v5.5 of "Storage Manager Extended Edition" and I have the older packages from Passport Advantage that actually say "Extended Edition".

Re: per-terabyte licensing deals...

Can you give us rough idea of the numbers (TSM sever count, number of clients, data volume, etc) you provided to IBM about your TSM environment? I just got our bill for support and I curious about your setup. -Original Message- From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu]

last 5.x version?

I've looked over the ftp site and Passport Advantage and it looks like the newest (or last?) version of TSM server for Windows is version 5.5.4.0. Is there anything newer that that version? I was looking for the latest non 6.x version to make sure we stay in suppo

Re: TSM 6.2

Am I seeing something about capacity based licensing on page 21? -Original Message- From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Richard Rhodes Sent: Wednesday, February 17, 2010 9:41 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] TSM 6.2 Here is the announc

Re: SV: TSM 6.2

Skype: cristie.christian.svensson Supported Platform for CPU2TSM:: http://www.cristie.se/cpu2tsm-supported-platforms Från: ADSM: Dist Stor Manager [ads...@vm.marist.edu] för Tyree, David [david.ty...@sgmc.org] Skickat: den 17 februari 2010 16:44 Till: ADSM-L@VM.MARIS

reclamation no longer working

TSM server 5.4.1.0 running on Windows 2003. I have an offsite copypool that has decided to no longer do reclamation. I noticed that I had far more tapes in that pool that I would have expected. I checked the pct_utilized numbers and saw that the tapes varied from 9

Re: reclamation no longer working

the process or mounts does it state that it is waiting on a volume (input or output)? It is possible that one of them is unavailable, and/or mounted by another process. Thank you, ~Rick -Original Message- From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Tyree, David

Re: reclamation no longer working

Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Tyree, David Sent: Thursday, May 06, 2010 1:02 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] reclamation no longer working Nope, no mention of waiting on a tape and/or volume -Original Message- From: ADSM: Dist Stor Manager [mailt

Re: reclamation no longer working

I'm doing a move data now. Or trying too. The process has been running for about 30 minutes with zero bytes moved. Nothing showing from a q request, nothing showing from a q mount. All drives online and plenty of mount points. I would expect it to mount a scratch tape and start moving data pr

Re: reclamation no longer working

May 6, 2010, at 1:48 PM, Tyree, David wrote: > I'm doing a move data now. Or trying too. > > The process has been running for about 30 minutes with zero bytes moved. Nothing showing from a q request, nothing showing from a q mount. All drives online and plenty of mount points.

Re: reclamation no longer working

ct: Re: [ADSM-L] reclamation no longer working >> On Thu, 6 May 2010 11:11:34 -0400, "Tyree, David" said: > I've run the threshold up and down from a few percentage points up > to 80-90% hoping something would change but no difference. I have > plenty of scratch tapes and mo

TDP for SQL vs SQL dumps

I was talking about backups with a couple of our DBAs and they mentioned using SQL scripts on the server to export the database and then use the regular TSM client to backup the exported file instead of using the TDP. They suggested building a server with a bunch o

Re: TDP for SQL vs SQL dumps

M customer last year and we found 7 out of 12 SQL servers that were supposedly backing up to disk had somehow gotten the backups turned off... -Original Message- From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Tyree, David Sent: Wednesday, June 09, 2010 3:05 PM

slowness with Storage Manager Admin Center 6.2

I'm running a new install of the 6.2.0.0 version of the Storage Manager Admin Center on a VM box. It's loaded on Windows 2008 R2 Standard (64-bit) with a pair of 2.66 GHz CPUs with 4 gig of memory. It's dedicated to TSM support and nothing else is loaded on the machine. It's pointed

Re: slowness with Storage Manager Admin Center 6.2

-- Lindsay Morris CEO, TSMworks Tel. 1-859-539-9900 lind...@tsmworks.com On Mon, Jun 14, 2010 at 2:19 PM, Tyree, David wrote: >I'm running a new install of the 6.2.0.0 version of the > Storage Manager Admin Center on a VM box. It's loaded on Windows 2008

Re: slowness with Storage Manager Admin Center 6.2

e the AdminCenter is pointing at 2 different TSM servers. Do you get the same performance regardless of the TSM server being used? Harry Husfelt From: "Tyree, David" To: ADSM-L@vm.marist.edu Date: 06/14/2010 12:06 PM Subject: Re: [ADSM-L] slowness with Storage Manager Admin Center 6.2 Sen

Re: slowness with Storage Manager Admin Center 6.2

admc -console output and see how long TSM is >taking to respond to the query. >Maybe THAT's the bottleneck. > > >Lindsay Morris >CEO, TSMworks >Tel. 1-859-539-9900 >lind...@tsmworks.com > > >On Mon, Jun 14, 2010 at 3:04 PM, Tyree, David wro

Re: slowness with Storage Manager Admin Center 6.2

ware. ~Rick Adamson Jax, Fl. -Original Message- From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Tyree, David Sent: Tuesday, June 15, 2010 3:51 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] slowness with Storage Manager Admin Center 6.2 Both servers respond prom

Client for Exchange 2007

We are going to be upgrading our current Exchange to Exchange 2007 on a 64bit box in the next few weeks. Our current TSM server is running 5.5.4.1. We will be going to 6.x around the first of the year. I was looking over the doc for the Exchange 2007 client and I n

Re: Client for Exchange 2007

-L] Client for Exchange 2007 Yep. 6.1 Exchange client works just fine with a 5.5. server. -Original Message- From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Tyree, David Sent: Tuesday, October 19, 2010 11:23 AM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] Client for

Re: TDP Exchange indiviual mailbox restore failure

We use a product from Quest Software, for our Exchange 2003. http://www.quest.com/recovery-manager-for-exchange/ they say it supports Exchange 2007 and 2010 as well. Our only experience has been with the 2003 version. And that experience has been great. We use to recover emails that users have

Using TSM to restore a mailbox

We are in the process of transitioning from Exchange 2000 to Exchange 2007. Our TSM server is at 5.5.4.1 (we are going to 6.x within 6 months or so). We are currently doing legacy backups using the 5.x TDP for Exchange. We plan to start out doing legacy backups with the 6.x TDP on t

Re: Using TSM to restore a mailbox

brary/aa997694(EXCHG.80).aspx Gui http://www.petri.co.il/using_rsg_in_exchange_2007.htm Ray -Original Message- From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Tyree, David Sent: Monday, November 15, 2010 4:35 PM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] Using T

reclamation question

We have three storage pools, the primary pool is a devtype FILE and the two copy pools are devtype LTO3. The offsite copy pools gets transferred offsite via DRM. Whenever I run a reclamation on the offsite copy pool the system grabs a scratch tape and then copies

Re: reclamation question

On occasion I have deleted a vol from a copypool when the percent utilized number dropped to a couple of percent. In our setup we have three identical data pools so we should ok but it's not something I do very often. I have watched the offsite reclamation process sit there for most of an hour o

Re: reclamation question

data must be pulled from the primary source. Hope this helps. Gary Lee Senior System Programmer Ball State University phone: 765-285-1310 -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Tyree, David Sent: Monday, April 11, 2011 12:54 PM

Re: TSM 6.2 Admin Center and IE 7.

Basically the same here. IE7 is way too slow and FF 3.6.16 is just right. David Tyree  Interface Analyst  South Georgia Medical Center 229.333.1155 Confidential Notice:  This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confident

licensing question

We are thinking about adding an additional TSM server to our environment to use for an offsite DR. Basically we would duplicate our onsite data to the new offsite TSM server. How would we go about licensing for the additional server? Or does it matter?

TSM version 6.x?

I remember some discussions about some new features that might be included in TSM 6.x whenever it comes out. Wasn't one of those possible features something to do with data de-duplication? We are in the very very early stages of looking at de-dup products and if TSM can do

backup stgpool issue

I've got something strange going on here. If I run a backup storage pool command from my primary pool to one of my offsite copy pool everything is fine. It will finish whenever it is done. Same when I do a backup to my onsite copy pool. As long as let them finish everything is ok.

Re: ?? TDP for DBs - does it support SQL Express?

Not sure of all the functionality with SQL Express but what about scheduling a DB dump within SQL Express and then letting the standard TSM pick up the dumped files? Would be cheaper as well. -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Bill

Re: TSM v6 -announcement

They might want to recheck that time for the webcast. It's listed as starting at 1 AM! I suspect it's at 1 PM. -Original Message- From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Richard Sims Sent: Friday, February 13, 2009 2:28 PM To: ADSM-L@VM.MARIST.EDU Sub

TSM 6.x and dedupe

Can users of TSM 6.x comment on it's data dedupe functionality? I'm curious as to how it functions and would like some info about it. David Tyree Interface Analyst South Georgia Medical Center 229.333.1155 Confidential Notice: This e-mail message, including any attachments, i

disabe/enable a sched via command line

I'm trying to figure out to enable and disable client schedules from the command line. I've looked over the online help and elsewhere but no luck. If the command was for an admin sched I would do "update sched something type=admin active=yes/no" . But I don't see

Re: disabe/enable a sched via command line

nager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Tyree, David Sent: Wednesday, December 14, 2011 1:05 PM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] disabe/enable a sched via command line I'm trying to figure out to enable and disable client schedules from the command line. I

hypothetical situation with dedup turned on

I've had some sys admins ask me about a possible situation with using dedup on our primary storage pool. We are currently using dedup and I can't come up with a good answer. Ok, our primary storage pool is using dedup. Something (corruption, whatever) happens to o

Re: hypothetical situation with dedup turned on

Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Tyree, David Sent: Wednesday, November 14, 2012 10:36 PM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] hypothetical situation with dedup turned on I've had some sys admins ask me about a possible situation with using dedup o

Re: hypothetical situation with dedup turned on

gt; pool? > > Grigori G. Solonovitch > Senior Technical Architect Ahli United Bank Kuwait > www.ahliunited.com.kw > > Please consider the environment before printing this E-mail > > > -Original Message- > From: ADSM: Dist Stor Manager [mailt

issue with offsite reclamation

I noticed that I wasn't getting as many tapes back that though I should get and I dug a little deeper and found an error popping up in the activity log: ANRD Thread<32> issued message from: ANRD Thread<32> 07FEF7A56A99 OutDiagToCons()+159 ANRD Thread<32> 00

  1   2   >