Hi
Well the quest for lan free backups continues
I got past my initial problems by upgrading storage agent to 5.1.5.4 (same
level as server)
Yesterday I managed to run an image backup lan free, 150Gb in 1hr 15 minutes
so was quite happy with that. However when I went to restore it 5 minutes
Hi Lan,
Some questions : which O.S. and which Oslevel are you trying to install
to ? Did you try to install from a local or remote drive ? How far did
the install process go (if on windows, did it create a "TSM_INSTALL"
directory under c: ?)
Also keep in mind that unless you have a 5.2 server, you
You must set this option higher than 0x41 (I prefer 0xFF) on *any* machine
accessing tape over SAN - be it TSM server, TSM Storage Agent, or any
other product.
Afterwards you must perform the backup *again* - some times with low
maximumsglist setting the data is reported to be written but is not
co
Hi,
just an info,
when we ran some LAN free backup/restore tests using TSM 5.2.1.1 server and STA
5.2.1.1 it was not necessarry to
set the maximumsglist at all using Emulex LP9002 HBA's. Backup and restore
operations worked fine.
We used LTO2 drives and LTO1 tape though.
Mit freundlichen Grüßen /
Hi,
I have sap r/3 in aix 5l, and tsm 5.1
The error code for backint is:
ANS0344E (RC2107) Do not send data with sizeestimate 0.
where i set sizeestimate for dsmsendobj ??
tanks
Doru Cucoranu
Director Suport Tehnic
Zlatko
thanks for your response...we have been running our tsm server for a
year with maximumsglist at the default value if what your saying is
true about restore capability that would explain a few things.. we have done
major restores and not got all the data back we expected. Is there
Doru
Sounds like APAR IC36691
http://www-1.ibm.com/support/docview.wss?uid=swg1IC36691
IC36691: TDP FOR MYSAP.COM ( R/3 ) RECEIVES RC=2107 ERROR: ANS0344E (RC2107) CANNOT
SEND DATA WITH A ZERO BYTE SIZEESTIMATE
APAR status
Closed as fixed in next release.
Error description
When perform
Chris,
Nearly two years ago (during the TSM 4.2 era) QLogic changed the default
value of MaximumSGList option from 0x41 to 0x21. This option mandates how
large your FCP packets can be. If you were receiving errors when packet is
larger than the limit, you will now during backup time there is an
in
Anyone have a good query to list how much data is left to be moved when
a "backup stg" command is running?
David Ehresman
Trying to upgrade from 5.1.6.5 to 5.1.7.x or 5.2.x and all of my NFS
mounted disk volumes can't be varied online. This is an example of the
error:
/var/tsm/tsmnfs5/backup13/netwaredisk240.dsm is in use by another server
Server is Red Hat Linux release 7.2.
Any ideas?
You are not describing on which platform.
I am not sure is this QLogic specific or owners of Emulex adapters were
hurt too. What I can say is that IBM are shipping branded QLogic adapters
(QLA2200F, QLA2300F, or QLA2340F) for Netfinity/xSeries systems. As TSM is
getting bundled with IBM hardwar
TSM sever 5.2.1 on win2k
Oracle 8.1.7.3 on winnt 4 sp6a
rman is running on a different nt4 sp6a machine
TSM for Databases - Oracle 5.2.0 is installed on the rman server with ba client 5.1.6.0
when running the rman scripts on the rman server I get these errors:
RMAN-03007: retryable error occurre
So just for my clarity
This affects all data written to the LTO drives, it doesn't matter whether
its data from normal LAN backups or LAN Free backups.??
In effect all my backups taken in the last year are potentially not fully
restorable.
I would love you to tell me the above is wrong
What a
Try running "tdpoconf showenv" on client. If info does not display
or is not complete, then you haven't setup tdpo.opt or other files correctly.
David B. Longo
System Administrator
Health First, Inc.
3300 Fiske Blvd.
Rockledge, FL 32955-4305
PH 321.434.5536
Pager 321.634.8230
Fax:321.
Hi Stephen!
When using Oracle 8.1.7 you will have to relink RMAN with TDPO. This
procedure can be found in the manual. For your convenience, here's the
direct link:
http://publib.boulder.ibm.com/tividd/td/ITSMFD/SC32-9064-00/en_US/HTML/ab5u0
008.htm#HDRRELINK
Kindest regards,
Eric van Loon
KLM Roya
The rman and oracle servers are NT4.0 sp6a. The relinking in the manual outlines the
steps for unix not win32.
Steve
-Original Message-
From: Loon, E.J. van - SPLXM [mailto:[EMAIL PROTECTED]
Sent: Thu 10/30/2003 10:15 AM
To: [EMAIL PROTECTED]
The tdpoconf looks fine to me. Am I missing something?
Steve
C:\TSM\AGENTOBA>tdpoconf showenv
IBM Tivoli Storage Manager for Databases:
Data Protection for Oracle
Version 5, Release 2, Level 0.0
(C) Copyright IBM Corporation 1997, 2003. All rights reserved.
DATA PROTECTION FOR ORACLE INFORMA
Just wanted to pass along a great experience with doing a TSM Upgrade!
ENV
RS/6000 H80 (4x8)
AIX 4.3.3
TSM 4.1.6
TSM DB 100GB
Just by chance we read the readme for 5.1.7. It stated
Customers migrating from a prior release of Tivoli Storage Manager MUST
1. First download and install 5.1.7.0 (N
Are you sure you have the agent.lic file?
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of
Stephen Firmes
Sent: Thursday, October 30, 2003 10:24 AM
To: [EMAIL PROTECTED]
Subject: Re: Oracle TDP issues
The tdpoconf looks fine to me. Am I missing someth
It is there. One thing that I am thinking is my problem is that on the oracle server
there is no baclient or tdp. We have both installed on the centralized rman server.
Still plugging away.
Steve
-Original Message-
From: Wholey, Joseph (IDS DM&DS) [mailto:[EMAIL PRO
Thank you, Arnaud!
you are right. I did suspect that my OS level may not match the linked ftp
file forwarded by our backup server manager.
I switched from 64 bit to the 32 bit TSM client to install to my win2000
server, it succeeded. (Next time, I will keep the old version while
upgrading since I
You don't provide the scenario under which the problem occurs, so it is
difficult to give you an answer.
If you are using the scheduler service to perform this operation, then
make sure you are using an account that has access to network resources.
The local system account does not have access to
Trying to delete some unused filespaces from a windows nt client.
Tried "del filespace anonymouse \\cont_ed\apps"
Says no matching filespaces found.
However, below find a cutting from a "q filespace" that says it is there.
Need some help please.
Node Name: ANONYMOUSE
Filespace N
Hi,
I am going to go out on a limb here, but have you rebooted since you
installed the TDP Oracle agent? I have installed this several times and has
always had errors until I have rebooted.
Michael Wheelock
Integris Health
-Original Message-
From: Stephen Firmes [mailto:[EMAIL PROTECTED
Look up the reference info for DELETE FILESPACE (HELP DEL FI will work
from the Admin command line interface) and have a look at the NAMETYPE
option.
Regards,
Andy
Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development
Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROT
Hi Zlatko,
the whole environment was w2k, and the HBA was a LP9802 not a LP9002, sorry,
I was well aware of the problem with the MaximumSGList, but I thought since I'm
using new HBA's with the new TSM version I'll try it
without setting this key in the registry and there seemed to be no problem.
Ba
Andy nailed it.
Thank you very much. This is the perfect kind of help. Just point me to the correct
manual section. I looked at it, but overlooked it.
Glad that helped.
Sure, I could have just said, "use nametype=unicode" (or "nametype=fsid")
But I'm a big believer in the latter part of "give a man a fish, feed him
for a day; teach him to fish, feed him for life". :-)
Regards,
Andy
Andy Raibeck
IBM Software Group
Tivoli Storage Manager Clie
David,
One option is to do a q content for each DISK volume.
i.e. q content VVV copied=no
This will list files that have not made it to offsite storage pools.
I have a unix script that loops through mine every morning to make sure
everything gets copied. When it is complete the script exits
Hi,
I am using a scheduler service to run the backup daily. The TSM resides on
the window2000 server, which is also a domain controller. The two domains
that I want to back up are also on the two partitions of the hard drives of
the same machine. So there should not have any access problem. I am
s
I'm new to TSM, so this is probably simple.
I'm using TSM for Windows 5.2 on a Windows 2000 box, and I'm trying to
backup a local drive (D:) as a test. I'm deliberately using an old DAT
drive so I can see how TSM handles multiple tape backups and the reclaim
feature etc.
Unfortunately, tape 1 fi
Maybe this topic has been covered before but I have been pulling my hair out
on how to acomplish my goal and I am new to the list but anyway here is the
problem:
I am looking to backup 1 directory and all sub directories every night, I
can't seem to get the rules right in the option file to exclud
Zlatko Krastev wrote:
> So for partitioned servers I would prefer to have separate TSM node
> for each Domino partition
> - each partition/node can run its schedules independently from
> others - both parallelism without losing the result codes
> - you can very easily split one or more par
It isn't clear if you want to back up files on e: or g:.
Assuming you mean to back up everything under e:\dir2, you could do this:
domain e:
exclude *:\...\*
include e:\dir2\...\*
Note that this will also back up other directories (but not files) on e:.
Perhaps an easier way would be t
...
>I've tried editing the options file using a text editor and increasing
>both RESOURCETIMEOUT and MOUNTWAIT, but neither option seems to have any
>effect. Surely it's possible to get TSM to wait indefinitely until
>someone changes a tape
Static chages to the dsmserv.opt file are seen
Hi,
I have a w2k cluster configured as a client of TSM. We are running tsm
5.1.6.5 (client and server). Server is running in Solaris.
Now I'm having some problems and I get these messages in dsmerror.log:
10/29/2003 23:10:30 GetFileShareInfo(): connectRegistry() for machine
sapbc02 failed, rc=53.
Hi,
I have difficulty to find a way to modify the domain list. The help file
says that using domain and include/exclude panel can modify the domain
list. I don't see such option in the TSM5.2 GUI on window2000 server. Could
anyone kindly point it out what I have missed? Our backup server runs
TSM5
Does anyone have a way to determine the total amount of files and data
used by a specific file type across the server? In particular, mp3's but
there are other questionable data types.
I realize that this will be an extremely time consuming select but you
gotta do what you gotta do.
-Bil
William,
Have you ever looked into ITSRM. Here is a brief description of its capibilities, one
of which is the ability of file level analysis.
Managing Storage Resources Across the Enterprise
Tivoli SRM is designed to manage the heterogeneous storage environments found in most
organisations
Is there any way to quantify the amount of space that will be reclaimed
via changing a retention policy and letting expiration run until it's
done? For example, the current policy is 180 day/8 versions. If I
change that to 30 days/3 versions, how much space would I gain? I'm
sure it's quite subst
40 matches
Mail list logo
