We do not intend to monitor clients with TME. Just Media and Library
issues. So we actually want to see all occurences. The default RLS does
not compile. We are working on it.
Paul D. Seay, Jr.
Technical Specialist
Naptheon, INC
757-688-8180
-Original Message-
From: Ran Harel [mailt
Boris,
Can I grab old actlog from my db backup ,
if so how -
With regards,
-Original Message-
From: Slutsky, Boris [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 30, 2002 4:31 PM
To: [EMAIL PROTECTED]
Subject: Re: q actlog
Hi,
The reason why you get only 2 weeks old act log records,
This is likely not a tape issue. 52GB/hr is about 14.8MB/sec. I am betting
your disk cannot read the data any faster than that. Unless the data is not
compressable at all the typical rates for a SCSI Magstar drive are 25+MB/sec
and can get as high as 34 on Ultra SCSI if the cables are real shor
Is the Q OCC command insufficient?
If not try this:
select node_name, stgpool_name from occupancy group by node_name,
stgpool_name
You can also add a where clause if you would like.
Paul D. Seay, Jr.
Technical Specialist
Naptheon, INC
757-688-8180
-Original Message-
From: Joel Fuhrma
Don't forget to check the Client Option Set as well. You may have an option
in there for DOMAIN ALL-LOCAL and it may even be set to NOT allow overrides
from clients (been there). ;)
-Original Message-
From: Zlatko Krastev [mailto:[EMAIL PROTECTED]]
Sent: Sunday, May 26, 2002 1:47 AM
To:
The problem with the default rls is that the baroc does not
match the rls:
The old approach for TSM adapter was to create an event class
for each message, which ment thousands of classes resulted with
heavy load on TME.
The new approach is one Server event class and one Client event
class and one
---
O/S: SunOS 5.6
TSM: Version 4, Release 2, Level 1.15
Tape library: scalar 1000 from ADIC
Tape drive: AIT2 drive
Tape : AIT2 (50GB~100GB)
---
Dear All,
Situation we face
I am wondering where I can get more detailed info
Yes you can ! All u need to have is restore your 'db' on development box.
You must note as long as you have ACTLOGRETNETION set to 14 days or so,
your earlier db also contains 14days of logs only. only thing you can have
form the old db is back 14days from the date you restore your db.
Thanks and
Hello TSMers.
I generated a backupset on a tsm server a a remote site. I then brought the
tape back to our local tsm site and I am trying to query the contents of the
backupset but it hangsDoes anyone know how I can view what is on the
tape
Your assistance will be greatly appreciated.
T
"Leijnse, Finn F SITI-ITDSES31" wrote:
> Someone has decided to archive 1.5 TB (oracle DB) to a management class with
> 5 years retention period. Some ** idea of a manager. What has happened is
> that that archive has abended halfway. Is there a way to delete that data? I
> have not got an idea o
Q OCC gives me for info then I need but your SQL statement is exactly what
I was looking for...thanks
"Seay, Paul" wrote:
> Is the Q OCC command insufficient?
>
> If not try this:
>
> select node_name, stgpool_name from occupancy group by node_name,
> stgpool_name
>
> You can also add a where cl
select node_name as "+ Node Name+++" from nodes.
Put in as many fill chars as you need to force the output to be as wide as
your widest node name.
-Original Message-
From: Gerald Wichmann [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 29, 2002 7:16 PM
To: [EMAIL
The answer is "IT DEPENDS", and different people have different opinions,
depending on what you are optimizing for.
If you will go to www.adsm.org and click CURRENT MONTH, this topic was
discussed at length over the past 2 days under the topic: allocating disk
volumes on RAID5 array
-Origin
I hope this is what you are looking for.
select node_name,stgpool_name from occupancy
similar to
q occup
Sung Y. Lee
512-823-1012
Bernard
Rosenbloom To: [EMAIL PROTECTED]
Subject: SQL sta
Hi,
If you install the TSM ODBC Driver and point it at your TSM Server's IP
Address and Port 1500, you can do this query in Excel or MS Access.
In MS Excel click on Data, Get external data, new database query, Click on
the Data Source name that is your ODBC connection Name, and log in to your
TSM
Check the IBM web site for the current numbers:
http://www.storage.ibm.com/hardsoft/tape/3590/prod_data/g225-6824.html
3590 tape drive performance depends on the model. The latest E1x models
write at 14 MB/sec raw, with a maximum sustained rate on SCSI of 34 MB/sec
(with compression) and 42 MB/
Oops, didn't realize this continued in a AW: about DRM" thread.
-Original Message-
From: Alex Paschal
Sent: Wednesday, May 29, 2002 3:44 PM
To: 'ADSM: Dist Stor Manager'
Subject: RE: about DRM
Hi, Burak.
The Admin Guide, in Chapter 9, Managing Storage Pools and Volumes, the
section "R
The below output is from a simple select statement. I hate to ask this again
but its been a while since I've done it and I forget how to format the
columns. What I need to do is extract the node names from the backup server
so that I can then perform operations on them. How do I increase the width
See http://msgs.adsm.org/cgi-bin/get/adsm/864.html
Along with multiple others (http://search.adsm.org/)
-Original Message-
From: Joni Moyer [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 29, 2002 11:39 AM
To: [EMAIL PROTECTED]
Subject: Mirror Recovery Log & DB with RAID-5
Hello!
The
Hello *SMers,
On one of our production boxes (data warehouse) this error occurred
yesterday during a hot backup with TDPO 2.2.0.2 (most current patch
available on the ftp site). I can't find anything in the activity log or in
the errpt for the TSM server and the client that correlates with this
e
I thought it was 16MB/sec B1A model type, and up to 24MB for
E1A
Gabriel C. Wiley
ADSM/TSM Administrator
AIX Support
Phone 1-614-308-6709
Pager 1-877-489-2867
Fax 1-614-308-6637
Cell 1-740-972-6441
Siempre Hay Esperanza
|-+>
|
What is the correct way to backup Symbolic links for AIX.
TSM server V 4.2.1.11
AIX client V 4.2.1.23
The client wants to backup all the folders pointed by the Link and also restore the
folders pointed to by symbolic links.
Should I be able to see the link in the Backup GUI ?
Thanks
Rajesh Oak
Hmm...
All of our disk storage pools are larger than 2 GB and have large
files enabled because we do see files larger than 2GB come in from
clients...
I'm quite sure I'm not going to want to slice up a 36Gb disk into 18
2GB filesystems just to use direct I/O. I think the d
You are correct.
Paul D. Seay, Jr.
Technical Specialist
Naptheon, INC
757-688-8180
-Original Message-
From: Luscombe John (HS) [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 29, 2002 2:40 AM
To: [EMAIL PROTECTED]
Subject: AW: about DRM
Burak,
As far as I understand it, the reclamat
Correct my math if I'm wrong, but doesn't that work out to be
almost 15 MB/sec ? ( 52 * 1024 / 60^2 == 14.79 MB/s ). Seems to
me that that's pretty great performance, given that the
advertised uncompressed drive rate of a 3590 is 14MB/s.
What is the indication to you that this is "very slow"?
-
An excerpt from the Magstar Redbook. SG24-2594-02
"The Magstar tape drive is capable of reading and writing data at a rate of
9
MB/sec. This is three times the rate at which IBM 3490E devices can read
and
write data. The IBM 3590 High Performance Tape Subsystem can transfer data
between the ho
Thanks Bill. Great idea, I've modified ours and hope it runs tomorrow
morning!
Tim Rushforth
City of Winnipeg
-Original Message-
From: Bill Boyer [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 22, 2002 10:51 AM
To: [EMAIL PROTECTED]
Subject: Re: Running a Windows Batch file on my Windo
Hi again,
I only use one drive. This is important. Sorry for my
previous mail.
Client Options:
nodename IBM_TEST
ERRORLOGRETENTION 5
PASSWORDACCESS GENERATE
SCHEDLOGRETENTION 5
SCHEDMODE PROMPTED
TCPB32
TCPNYES
TCPPORT
Hello *SMers,
On one of our production boxes (data warehouse) this error occurred
yesterday during a hot backup with TDPO 2.2.0.2 (most current patch
available on the ftp site). I can't find anything in the activity log or in
the errpt for the TSM server and the client that correlates with this
e
I am getting this error message on my TSM Server and was
not sure if these files are cached and replaced with new
files causing the ANE4005E error below. Also, is there a
specific reason that the /VAR file system should be backed
up on a regular basis. Thanks.
ANE4005E (Session: 13772, Node: HNA
Hello,
When the tsm client talks to the server it uses 1500. Is there a way to tell
the server what port to talk to the client on?
Thanks,
Keith
Here's an alternate . . .
select distinct node_name,stgpool_name from occupancy
Also, if you type . . .
select * from occupancy
. . . you'll get the entire table.
Hope this helps.
Mahesh
>>> [EMAIL PROTECTED] 05/29/02 11:18AM >>>
I hope this is what you are looking for.
select node_name,s
Hello again,
here's the deal-
we have approximately 50 frame relay nodes that backup to TSM servers.
These NT boxes' drives are almost full (max is 16G on these) and partitions
were created to hold data (D:\) and app shares (E:\).
We are getting replacements (80G and expandable), and will be xc
Add the '-tab' command line parameter. We do this with Perl scripts and then
split(/\t/,$RESULT) it.
Bill Boyer
DSS, Inc.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Gerald Wichmann
Sent: Wednesday, May 29, 2002 7:16 PM
To: [EMAIL PROTECTED]
S
Hello!
I don't have a reporting package and I was wondering if any on you could
tell me some useful scripts that you run on a daily basis? Thanks!!!
Joni Moyer
Associate Systems Programmer
[EMAIL PROTECTED]
(717)975-8338
Francisco,
those numbers are normal. 3590 drives have a native transfer rate of
12MB/s. that makes around the 50GB/h mark. to have more than that you have
to compress your data, and the 3590 can compress up to 3:1. whether you can
do that or not depends on your data (3:1 compression ratios are gen
Fran,
one parameter you can change is Bufpoolsize on the server. for 1GB of real
RAM you should put it to 131072. the other thing is to turn compression
off, in a single client, fast client, fast server, fast network it gives
better performance.
then on the AIX server try
no -o rfc1323=1
no -o t
I am planning a TSM Server move from OS390/MVS to AIX. My largest
storage pool is about 73gig and is spread across 32 volumes of about
2.3gig each. On AIX I will have a 128gig file system so I could put
that storage pool into a single volume if that makes sense.
My question is should I spread t
You should try the archives (http://www.adsm.org) and also the Scripts Depot
at Coderelief (http://www.coderelief.com/depot.htm) Lots of good stuff
people on this list have posted there.
Bill Boyer
DSS, Inc.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Be
Hi TSMers,
there is a special offer of IBM3590 10GB cartridges (amount approx. 450). Some of them
were used for tests (only for a short period of time). The majority of them have never
been used. All cartridges have been erased and are therefore useable. The cartridges
will be available by mid
I'm not prepared to post our scripts yet but will tell you some of the
things that we run daily:
Report on failed client schedules
- q event * * enddate=today begintime=NOW-23:59 endtime=NOW f=d
- filter and report on anything other than "completed"
Report on Client errors (mostly failed
If asking about prompted mode when server connects to client to tell it to
start a schedule, see client option TCPCLIENTPORT
-Original Message-
From: Keith Kwiatek [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 30, 2002 10:10 AM
To: [EMAIL PROTECTED]
Subject: Question about port configura
/var on AIX can have a lot of temporary files, print files and mail spool
files etc. A file is there when TSM gets list of files to back up and is gone
when actually tries to backup. I don't worry about. I like to backup up
/var anyhow as there is stuff there worth saving (cron jobs, for inst
Haven't looked at 5.1 yet, I know there is a new command
something like "move nodedata". However as you are upgrading
OS and rearranging disks, I would take your last option - Rename
nodes (rename NODE NODE_OLD), then register new node names
and do full backup of new machines.
After comfortable
Currently, we backup everything either to DISKPOOL (which migrates to
LTOTAPE), or directly to LTOTAPE. Files (backup/archive client), databases
(TDP for Domino, and TDP for SQL), everything is eventually stored into
LTOTAPE. The databases get backed up FULL every time. The largest
database we
Select node_name as "Node Name" from Nodes
You may have to add -tab to your dsmadmc command.
Paul D. Seay, Jr.
Technical Specialist
Naptheon, INC
757-688-8180
-Original Message-
From: Gerald Wichmann [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 29, 2002 7:16 PM
T
ANRD is generic error message handling unknown situations. Usually
such problems can be resolved only by IBM support due to their rare
occurences. The large output is tracing information to help support and
developers to analyse the root cause.
The only hint I can give you is to perform AUDIT
Lisa,
what about:
- perform incremental backup from old box
- generate backupset (devclass file, burn to CDs)
- transfer the backupset to node
- restore the data locally from backupset on new box
- define *same* node name in dsm.opt
- RENAME FILESPACE \\old_host\d$ \\new_host\d$
I have never perf
Hello,
I have been using a "q event * * node=* begindate=today-1 enddate=today
begintime=08:00 endtime=06:30 format=detailed"
command for quite a while. I output the info into a web page for
Operations staff to read. I am tired of
having to move the page to the right to see the status. I've got i
49 matches
Mail list logo
