Can anyone give me a ballpark cost of IBM's ADSM Server v. 5, for AIX
4.3.3? We are part of the U of I, so we would get an educational discount.
We also already have ADSM server 3.1, so we would probably get an upgrade
discount as well. But all I'm looking for is a ballpark number. I&#x
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Roger Deschner
> Note we selected SuperDLT over LTO or other tape technologies solely
> because SDLT drives could read our old DLT-IV tape cartridges. An SDLT
> drive, however, cannot write to a DLT-IV cartridge as I understand i
We did a simple cpu/disk upgrade during first shift. The libary was the same,
and we moved from nt4 running on a Dell 6100 (dual 200Mhz) to a Dell 2400 also
a dual cpu running w2k.
After the last of the night's backup finished we
copyed all the primary data to the offsite pool.
Migrated all data
successfully, but we only had 23 clients.
>
>Paul D. Seay, Jr.
>Technical Specialist
>Naptheon Inc.
>757-688-8180
>
>
>-Original Message-
>From: TSM geek [mailto:[EMAIL PROTECTED]]
>Sent: Thursday, August 29, 2002 4:26 PM
>To: [EMAIL PROTECTED]
>Subject: Hoping
TSM geek wrote:
> Hello All,
>
> We are hoping to get a new server to use for our existing TSM
> environment. I
> was curious if anyone has had any experience in
> setting up a new TSM server and migrating the existing TSM environments'
> data to that new server without losing any thing?
>
Yes, I
We used export/import successfully, but we only had 23 clients.
Paul D. Seay, Jr.
Technical Specialist
Naptheon Inc.
757-688-8180
-Original Message-
From: TSM geek [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 29, 2002 4:26 PM
To: [EMAIL PROTECTED]
Subject: Hoping to get new adsm
Hello All,
We are hoping to get a new server to use for our existing TSM environment. I
was curious if anyone has had any experience in
setting up a new TSM server and migrating the existing TSM environments'
data to that new server without losing any thing?
eel free to contact me if you have additional questions.
Tom Kauffman
NIBCO, Inc
[EMAIL PROTECTED]
> -Original Message-
> From: Bruno Bossier [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, April 03, 2002 6:14 AM
> To: [EMAIL PROTECTED]
> Subject: ADSM server restore
>
>
&
Hi Bruno...
A few things...
1) Upgrade immediately, if not sooner. ADSM (version 3.1) is very old and
is unsupported, and if you encounter problems, you'll need to call on a
highly paid consultant who remembers all the sillyness that came along with
3.1. If you're running 3.7 or higher (when
I'm currently creating a disaster recovery procedure for an AIX server.
ADSM is used for backups. I have no experience at all with ADSM, so this is
what I have in mind on how to restore the data as quickly as possible :
1. Have a daily backup available via tar or any other standard tool of the
fi
n
a favour, or ask an EMC person to check for you.
Hope that helps,
Kevin.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Wu, Jie
Sent: December 7, 2001 5:12 PM
To: [EMAIL PROTECTED]
Subject: Re: ADSM Server and Client 4.1 supported on AIX 5L
, December 05, 2001 6:06 AM
To: [EMAIL PROTECTED]
Subject: Re: ADSM Server and Client 4.1 supported on AIX 5L
ADSM/TSM 4.1 will NOT run on AIX 5.1 L (or AIX 5). You must run 4.2 +
Kevin.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Alex Lee
Sent
Kevin,
Thanks.
Alex
Kevin Sawyer
cc:
Sent by: Subject: Re: ADSM Server and Client 4.1
"ADSM: Dist supported on AIX 5L
Stor Ma
Thanks. Danny Miles sent me a message yesterday suggesting the same
thing; indeed, it was the recovery log filling up that caused the crash.
The database was not backing up due to the fact that it could not find a
scratch tape; although there were scratch tapes labelled in ADSM, the
3590 library
AIX window, and you will see the error messages it issues as it
tries to come up.
Report those back to us, they are usually helpful...
-Original Message-
From: Anthony Lanni [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 04, 2001 2:37 PM
To: [EMAIL PROTECTED]
Subject: ADSM server crash
ADSM/TSM 4.1 will NOT run on AIX 5.1 L (or AIX 5). You must run 4.2 +
Kevin.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Alex Lee
Sent: December 5, 2001 3:05 AM
To: [EMAIL PROTECTED]
Subject: ADSM Server and Client 4.1 supported on AIX 5L
cc:
Sent by: "ADSM: Subject: ADSM server crash
Dist Stor Manager"
<[EMAIL PROTECTED]
DU>
12/05/2001 03:37
Please respond to
Dear all,
The tivoli home page state that ADSM server and client v4.1
supports
AIX 4.3.2 and AIX 4.3.3.
http://www.tivoli.com/support/storage_mgr/adclaix.htm
http://www.tivoli.com/support/storage_mgr/ad6serv.htm
We are thinking of upgrade
Ok; I'm running ADSM 3.7.2.0 on AIX 2.4; the server died with a core
dump, and we can't get it restarted - it crashed out each time.
several of the drives that the database volumes live on have hit 100%;
we suspect this as the problem, but we can't allocate more space to the
database since the se
Hello,
since a few days, one of "my" adsm-servers crashes down, telling something about
storage-problems.
The adsm-server runs on WinNT 4.0- EnterpriseEdition - SP5. The ADSM release is
3.1.2.50 (yes, I know, I have
to upgrade it!). Has anyone seen this messages before and maybe som
Hello guys,
has anyone experience with the optimal TCP/IP settings for our ADSM-Server
in combination
with the AIX-box.
ADSM-Server 3.1.2.90 and in a few months TSM 4.2
AIX 4.3.3 on a S70, 4GB memory. Clients are AIX 4.3, NT and SUN.
I'm interrested in the no -a settings in combination wit
Hi all,
We currently have ADSM Version 3, Release 1, Level 2.5 on AIX 4.3.3.0
platform.
We are planning to change the IP addresses for the ADSM server and its 2
clients. In line to this,
will there be necessary changes in configuration after the changes in IP
addresses are made?
Thanks
: [EMAIL PROTECTED]
Subject: Netapps for ADSM Server?
Just out of curiosity, has anybody experimented with using a
Network Appliance, or other similar network attached storage
devices, for their ADSM database or logs?
We are using Network Appliance Filers very successfully on our
Oracle servers,
Just out of curiosity, has anybody experimented with using a
Network Appliance, or other similar network attached storage
devices, for their ADSM database or logs?
We are using Network Appliance Filers very successfully on our
Oracle servers, so I was curious about the possibility of using
them o
3.7
and up. Did you monitored cache-hit ratio? How much down it went? How much
physical memory your ADSM server has? Did you setup paging space of equal
size?
We are using shark system for database. Basically shark system contains SSA
Arrays in RAID5 configuration. More than that it has cache of 6GB
What database configuration is anyone using for a single ADSM instance that
is handling for than 300 full size clients (not PC size with 1-1000 Gigs per
client and 10,000 to 2,000,000 files per client)? I am currently running
300 clients on one database instance with 2 SSA arrays and I would like
Hi Everybody,
Do you have any idea what these errors from NT event log of adsm server?
The description for Event ID ( 7 ) in Source ( AdsmScsi ) could not be
found.
It contains the following insertion string(s): \Device\mt0.0.0.5.
The description for Event ID ( 11 ) in Source ( AdsmScsi
udder Investments
Ray Pratts
cc:
Sent by: Subject: Re: Urgent!!! transferring adsm
server into new machine
"ADSM: Dist
Stor Manager"
&l
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Ray Pratts
Sent: Friday, April 06, 2001 8:57 AM
To: [EMAIL PROTECTED]
Subject: Re: Urgent!!! transferring adsm server into new machine
I've had to do this several times. The only other consider
d any domument on
> it.
>
> Jie
>
> > -Original Message-
> > From: Zosimo Noriega (ADNOC IS&T) [SMTP:[EMAIL PROTECTED]]
> > Sent: Thursday, April 05, 2001 11:37 PM
> > To: [EMAIL PROTECTED]
> > Subject: Urgent!!! transferring adsm server
the exact syntax for dsmserv command? I could not find any domument on
it.
Jie
> -Original Message-
> From: Zosimo Noriega (ADNOC IS&T) [SMTP:[EMAIL PROTECTED]]
> Sent: Thursday, April 05, 2001 11:37 PM
> To: [EMAIL PROTECTED]
> Subject: Urgent!!! transferring
Hello to All,
I need your help.
My ADSM server (3.1.0.2.40) installed on Compac Proliant 5500 with WinNT4
operating system, I want to kill this server and migrate into powerful
server IBM Netfinity 7100 with same operating system and version of ADSM
server. Initially, i configured the new
sess
did not terminate.
Though halt has been issued I stll can connect to the server with a dsmadmc
session.
Regards
Heinrich Hartl
= initial call for help
I've run into a problem and I would be very obliged if someone has an idea what
I could do abo
gt;I've run into a problem and I would be very obliged if someone has an idea
>what
>I could do about it:
>
>ADSM Server for AIX-RS/6000 - Version 3, Release 1, Level 2.20
>
>seems to be in a strange state and nomore doing what its expected to do.
>
>dsmadmc shows the fo
: [EMAIL PROTECTED]
Subject: adsm server hangs
I've run into a problem and I would be very obliged if someone has an idea
what
I could do about it:
ADSM Server for AIX-RS/6000 - Version 3, Release 1, Level 2.20
seems to be in a strange state and nomore doing what its expected to do.
ds
I've run into a problem and I would be very obliged if someone has an idea what
I could do about it:
ADSM Server for AIX-RS/6000 - Version 3, Release 1, Level 2.20
seems to be in a strange state and nomore doing what its expected to do.
dsmadmc shows the following informations:
adsm&g
for the import.
Jim Sporer
>Hello all,
> I hope you can help me, we have two ADSM environments, one on OS390
> and the
>other on AIX both sharing the same IBM 3494 library. We are trying to
>export all
>of our data from OS390 to the the AIX ADSM server and are encountering a few
, December 21, 2000 2:41 AM
To: [EMAIL PROTECTED]
Subject: Export to another ADSM server using the same 3494 library
Hello all,
I hope you can help me, we have two ADSM environments, one on OS390 and
the
other on AIX both sharing the same IBM 3494 library. We are trying to export
all
of our
Hello all,
I hope you can help me, we have two ADSM environments, one on OS390 and the
other on AIX both sharing the same IBM 3494 library. We are trying to export all
of our data from OS390 to the the AIX ADSM server and are encountering a few
problems. I have exported some policy
Coni,
How are you determining your throughput? We also have an OSA-2 card,
connected 100MB full duplex behind a Cisco Fast Ethernet port. If you can
send me some of your stats I can try to compare them to some of ours. We
generally look at things in GB/hr rather than MB/sec, but hey, it's all bit
ROTECTED]>
To: [EMAIL PROTECTED]
cc:(bcc: John Naylor/HAV/SSE)
Subject: Anyone have a OS/390 ADSM server with OSA-2 card
We have OS/290 2.4 running on IBM 9672 using SNSTCP with an OSA-2 card.
>From the literature, we know that even though the OSA-2 card is rated for
155 Mbits/second, t
We have OS/290 2.4 running on IBM 9672 using SNSTCP with an OSA-2 card.
>From the literature, we know that even though the OSA-2 card is rated for
155 Mbits/second, the best we should see is 30 Mb/sec. but our ADSM is
pegged at 12 Mb/sec. Are we doing something wrong? Does anybody with a
similar
;[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject: Re: HELP: Cannot bring up adsm server
Yes , and still get the same error message. ADSM is installed and
functioning. I have to restore an SAP R/3 database and can't get past this
part.
Andre' Jennings
SAP R/3 Basis/Security Eng
g on the bright side of life"
-Original Message-
From: Richard Sims [mailto:[EMAIL PROTECTED]]
Sent: Sunday, November 12, 2000 9:10 PM
To: [EMAIL PROTECTED]
Subject: Re: HELP: Cannot bring up adsm server
>ANR0905Q Options file dsmserv.opt not found
Did you start the server from t
>ANR0905Q Options file dsmserv.opt not found
Did you start the server from the server directory?
Is the file in the server directory?
HI Friends,
Need a very big favour. I did a delete on the tapes, quite a few at one time
before the first one ended. Then the next day I found out my TSM creashed. I
try to bring it up using dsmserv, at the end of the line, there was this
line:
ANR0905Q Options file dsmserv.opt not found
ANR0990
>ANR7837S Internal error TBUNDO096 detected.
Jon - You can usually find such things written up in the APAR database.
The ones there talk of restoring the ADSM db.
You may want to talk to ADSM support before proceeding.
You don't say what ADSM V3.1 maintenance level you are at, but best
to b
We are running ADSM V3.1 on AIX4.3
Whilst deleting data from some old volumes I got a core dump and now when I
attempt to run the server I get the following error. I'm not sure where to go
from here as the documentation is less than helpful for the respective ANR
numbers. I could try and recover
Does anyone know who I should contact to arrange for internal IBM server
space on which to remotely backup my ThinkPad with ADSM client?
Keith M Linkous
IT Consulting and Implementation Services
IBM Global Services
Cell(650) 888-8342
Office (415) 545-3582
eFax (503) 214-9270
[EMAIL PROTECTED
[EMAIL PROTECTED]
Subject: Solaris 4.1 ADSM Server with Solaris 3.6 afs client (backup solution
maybe) ??
Hi,
just done more digging to findout if the following is possible
http://www.transarc.com/Library/documentation/afs/3.6/unix/en_US/HTML/RelNotes/aurns004.htm#HDRTSM
seems to indicate below
Hello,
no, the password is not transmitted over the network. Only a message is
encrypted using the password as an encription key.
I don't know about mksysbk as we run adsm server onto OS/390.
Regards,
René Lambelet
Nestec S.A. / Informatique du Centre
55, av. Nestlé CH-1800 Vevey (Switze
Hi, I have a query on the authentication process between the ADSM server
and clients. We have a ADSM server running on AIX and clients such as NT
and Win2000 that uses its services. The concern is, how does the ADSM
server perform authentication between itself and the clients ? Are the
passwords
>dsmc> sel -subdir=y -tapeprompt=n nodename=NTWLAMEZE d:\...\dsm*.log
>Node Name: DEVELOPMENT
Your nodename paramater should have a hyphen before it ( -nodename), here it
is connecting as default, DEVELOPMENT, and attempting to backup a file
called nodename=NTWLAMEZE.
>Directory-->
---
> From: Lu Ann Mezera[SMTP:[EMAIL PROTECTED]]
> Reply To: ADSM: Dist Stor Manager
> Sent: Thursday, July 27, 2000 9:56 AM
> To: [EMAIL PROTECTED]
> Subject: Backing up client from ADSM Server
>
> I am trying to determine the correct syntax to be ab
I am trying to determine the correct syntax to be able to backup various
clients (either NT workstations or NT servers) from the ADSM server which is
on an AIX node. This syntax will go into a script to be launched by a 3rd
party batch scheduler, not by ADSM. I know the files I want to backup
55 matches
Mail list logo
