Is the procedure different from WinNT ?
With NT, you have to install a temporary NT, make a full restore and copy
the adsm.sys content to :
DSMC RES C:\ADSM.SYS\REGISTRY\\MACHINE\*.* C:\WINNT\SYSTEM32\CONFIG\
I heard that for WIN2000, it was not necessary to work with a temporary
installation an
are bad again.
So, I have to focus on my SAN configuration. The problem is between the TSM
Server and the library.
Thanks for answering,
Ruddy Stouder
Senior Technical Consultant
TSM Certified Consultant
arent 100/full duplex om both systems and
switch.
How did you calculate 5,84GB/Hour => 13,3 Mb/sec ?
If you do it backwards 13,3 MB/s * 60sec * 60min=47,88GB/h.
//Henrik
Ruddy STOUDER
<[EMAIL PROTECTED]To: [EMAIL PRO
you can use an ARCHmc to
specify an alternate management
class
for the archive operation.
-Original Message-
From: Ruddy STOUDER
Sent: jeudi 6 mars 2003 15:26
To: [EMAIL PROTECTED]
Subject: Re: archive retention - quick question!!
Thanks ! But ... I have done all of them ... The reason why I am looking
here for info.
As I wrote, nothing is running on the 2 involved servers (so, no virus
protection software).
As I wrote, network cards are 10% used => no network settings involved.
Ruddy Stou
updated default management class to manage the
archive copy.
...
=> Here : If you change the mgmt class, the server uses the new mgmt class
to manage the archive
What is the real behaviour ?
Ruddy Stouder
Senior Technical
PWINDOWSIZE=63
TCPNODELAY=YES (AND TESTED WITH NO)
LARGECOMMBUFFERS=YES (AND TESTED WITH NO)
I was hoping to reach at least 25GB/Hours via a TCP/IP 100Mb network and
50GB/Hours via LAN-Free to LAN device
Many thanks in advance for any feddback
Ru
exact procedure because I can't
believe a 3494 library can't clean the drive if and only if required.
Many thanks in advance for any answers,
Ruddy Stouder
Senior Technical Consultant
TSM Certi
Indeed, registry is backed up if you make a full incremental backup with
domain=all-local. Once you give limitations to your domain (like with
c:\*.¨*), you exclude the system objects.
Ruddy Stouder
Senior Technical Consultant
Indeed ... All you can do is re-run the audit volume command with parameter
fix=yes. That way, corrupted file will be declared as unusable and try a
restore from another date/time.
Ruddy Stouder
Senior Technical Consultant
Can you run command AUDIT VOL 100335 ?
Ruddy Stouder
Senior Technical Consultant
TSM Certified Consultant
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de
Louvain-La-Neuve
Arnaud,
Don't worry. Just messages from clients trying to connect to the TSM server.
Ruddy Stouder
Senior Technical Consultant
TSM Certified Consultant
I.R.I.S.
Rue du Bo
Hello,
You should use the dsmfmt command prior to dsmserv format
dsmfmt -db
Dsmfmt -log
Then, you follow by dsmserv format (or dsmserv loadformat) command and by
dsmserv restore db
Ruddy Stouder
Senior Technical Consultant
ould solve your problem.
Ruddy
Ruddy Stouder
Senior Technical Consultant
TSM Certified Consultant
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de
Louvain-La-Neuve
Many thanks in advance ...
PS : What is the IBM web address shortcut to consult APAR ?
Ruddy Stouder
Senior Technical Consultant
TSM Certified Consultant
I.R.I.S.
Rue du Bosqu
database but the SQL server does not restart ...
Ruddy
Ruddy Stouder
System Engineer
TSM Certified Consultant
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de
Louvain-La-Neuve
.78 kernel udopen: operating system error 2(The
system cannot find the file specified.) during the creation/opening of
physical device G:\MsSql\SQLserver Data Devices\Dev_Device_Data.DAT
...
Many thanks in advance for your help ...
Ruddy Stouder
haned backupset volumes in volume history
Ruddy Stouder
System Engineer
TSM Certified Consultant
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de
Louvain-La-
...
Ruddy Stouder
Senior System Engineer
TSM Certified Consultant
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de
Louvain-La-Neuve
B-1348 Mont-Saint
have bad
media...
George Lesho
Storage/System Admin
AFC Enterprises
Ruddy STOUDER <[EMAIL PROTECTED]> on 05/17/2001 10:38:44 AM
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:(bcc: George Lesho/Partners/AFC)
Fax to:
Subject:
nual for recommended action.
05/08/2001 16:39:37 ANR8359E Media fault detected on LTO volume
265AADL1 in
drive DRIVE2 (\\.\TAPE1) of library LIB3583.
Any idea ?
Many thanks in advance,
Ruddy Stouder
System Engineer
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de Louv
emporary" NT but restore
the registry to an alternate location (the one of the restored NT).
Ruddy Stouder
System Engineer
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de Louvain-La-Neuve
B- 1435 Mont-Saint-Guibert
[EMAIL PROTECTED]
http://www.irislink.com
Tel: +32 (0)10 48 75 10 - Fax: +32
TSM NT Server 4.1.2 is not available anymore on the WEB site.
Maintenance and patch sites are not allowing 4.1.2 Server download. Does
anybody know why ?
Ruddy Stouder
System Engineer
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de Louvain-La-Neuve
B- 1435 Mont-Saint-Guibert
[EMAIL PROTECTED
Did you verify :
dsm.opt - Check if no reference to TCPClientAddress
Ruddy Stouder
System Engineer
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de Louvain-La-Neuve
B- 1435 Mont-Saint-Guibert
[EMAIL PROTECTED]
http://www.irislink.com
Tel: +32 (0)10 48 75 10 - Fax: +32 (0)10 48 75 40
Here is the SQL script :
select volume_name,node_name from volumeusage where node_name='$1' group
by volume_name,node_name
Just give the server name as parameter 1
Ruddy Stouder
System Engineer
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de Louvain-La-Neuve
B- 1435 Mont-Sai
the server. That's the gotcha.
Maybe I'm missing someting though .. please help
Steve
Ruddy STOUDER
cc:
Sent by: "ADSM: Subject: Re: URGENT ?
ABOUT DB RESTORE
t and invalid
argument
error.
Ruddy STOUDER
cc:
Sent by: "ADSM: Subject: Re: URGENT ?
ABOUT DB RESTORE
Dist Stor Manager"
tRY /
1) MOVE MEDIA ... To bring the tape back on-site in the TSM database
2) CHECKIN ... STATUS=PRIVATE to get the tape back in the library
Ruddy
-Original Message-
From: Steve Hicks [mailto:[EMAIL PROTECTED]]
Sent: jeudi 22 février 2001 17:11
To: [EMAIL PROTECTED]
Subject: URGENT ? AB
Sorry for answering so late. Just reading my mails after 2 weeks with
customers.
Same procedure to run on destination server but to import from him to
himself :
DEFINE SERVER TARGET NODENAME=SOURCE PASSWORD=XXX. with IP
address=127.0.0.1
DEFINE DEVCLASS TARGET SERVERNAME=TARGET
I think you have to run the EXCDSMC /ADSMAUTODELete command.
By the way, I tried using "BACKUPEXEC's ADSM option to backup EXCHANGE"
but I did not succeed.
I installed everything according to the BackupExec documentation. TSM is
3.7.2.
I created the suggested storagepools, policy domain, ... but
db from tape ).
> If you have enought disk space and you db is moderate in size do disk
copy
> of you db before you try auditdb.
> Petr
>
>
> - Pùvodní zpráva -
> Od: Ruddy STOUDER <[EMAIL PROTECTED]>
> Komu: <[EMAIL PROTECTED]>
> Odesláno: 29.
I upgraded my TSM Server (NT4.0 SP6) from 3.7.4 to 4.1.2 but
the dsmserv upgradedb gives the following error message :
dsmserv: asinit.c(341) : Error converting volume attribs for devclass
LTOCLASS
IBM SPOC is aware of the problem but no fix is available.
What could be a work-around ? (I tried
Is the "TSM Client Acceptor" service running ?
Ruddy
-Original Message-
From: Ken Sedlacek [mailto:[EMAIL PROTECTED]]
Sent: jeudi 25 janvier 2001 17:55
To: [EMAIL PROTECTED]
Subject: TSM 3.7.3 web client browser access probs??
Situation:
TSM server 3.7.3, TSM client 3.7.3, AIX 4.3.3
As far as I know is a utility delivered with the 3493 library.
A library like a 3575 can be managed though tapeutil utility.
For the STK libraries, I think this can only be done via the ACSLS
driver
delivered with your library.
--
From: Joe Faracchio
To: [EMAIL PROTECTED]
Sent: 01/13/200
LTO libraries (3581,3582,3583) and drives 3580 also supported on 3.7.4
--
From: Hunny Kershaw
To: [EMAIL PROTECTED]
Sent: 01/16/2001 3:23:39 AM
Subject: Re: TSM and LTO
TSM 4.1 also has support for IBM LTO libraries
(3581,3583 and 3584). The next PTF should include the
support for a few
to use the existing files.
You may need a reboot after step 1 and 5.
Regards,
Vo An Nguyen
Email: [EMAIL PROTECTED]
Ruddy STOUDER <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 12/28/2000
09:12:54
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by: "AD
quot;Tape devices". Do
> you know why and how I should configure the Library.
>
>
> Many thanks in advance,
> Ruddy Stouder
> System Engineer
> I.R.I.S.
> Rue du Bosquet 10 - Parc Scientifique de Louvain-La-Neuve
> B- 1435 Mont-Saint-Guibert
> [EMAIL PROTECTED]
u can also use the MOVE DATA command
to move data to new volumes to increase collocation, if you are able to
afford the processing time and the volume mount activity this would
cause."
Ruddy Stouder
System Engineer
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de Louvain-La-Neuve
B- 1435
Just change the status of the tape in DESTROY and TSM will not try to
use it anymore.
-Original Message-
From: McClean, Frank [mailto:[EMAIL PROTECTED]]
Sent: jeudi 28 décembre 2000 1:49
To: [EMAIL PROTECTED]
Subject: Repeated mount of bad scratch tape
Environment:Tsm server RS6000 S80
ions very carefully. I'm not
sure if the import/export function is really what you want to use to
migrate
your data to the new library.
Ken
> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf
Of
> Ruddy STOUDER
> Sent: Friday, December 2
following error from TSM : Unable to load dynamic linl
library adsmrsmd.dll
What should I do ?
Thank you very much for helping me. My customers are stressing me ...
Ruddy Stouder
System Engineer
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de Louvain-La-Neuve
B- 1435 Mont-Saint-Guibert
[EMAIL
tapes containing the exported data. How ? with
scratch status, with private status ?
Do an import command need to have the tapes defined in the Volhist or
libvol via a checkin command ?
Many thanks in advance for your help,
Ruddy Stouder
System Engineer
I.R.I.S.
Rue du Bosquet 10 - Parc
Sorry for the stupid question but :
- What is adsmautodelete used for ? Does the Backup Copy Group retention
data not work for exchange data ?
- How do you specify different node names ? On the client site, you only
have 1 dsm.opt file and so pointing to the
same management => 1 retention policy
Hello,
The ARCHIVE is using the client.
The only way to archive data wihtout using client is to GENERATE
BACKUPSET
The syntax is Generate Backupset *
devclass=... retention=... Description=...
Ruddy Stouder
System Engineer
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de Louvain-La-Neuve
May be a stupid suggestion but keep in mind that the scheduler must be
stopped/restarted to take the new list into account.
Ruddy
--
From: Joel Fuhrman
To: [EMAIL PROTECTED]
Sent: 11/15/2000 10:52:02 PM
Subject: Re: FWD: inclexcl problems
the exclude.fs should be just the name of the m
Hello,
COuld you make a ping on the TSM server and verify its IP address and
then, check the client settings preferences or the dsm.opt file to see
if your communication data are OK.
Please, also check on the server site if your client definition is still
OK.
Ruddy
-Original Message-
F
Hi !
I am running a 3494 with 6 drives allocated to NT/Unix(HP) world (*)
machines) and 2 drives allocated to AS4/00(4 machines).
NT/Unix world is running through TSM 3.7.3 located on a H80 AIX machine.
AS4/00 is accessing the 3493 as a single device through BRMS.
3493 is a wonderful library, r
Thanks a lot.
By the way, you mentionned impossible to schedule a script -
a small 'astuce' if you want to schedule a script in TSM, just schedule
an administrative command under TSM containing : run
Ruddy
--
From: Maria Paz Gimeno
To: [EMAIL PROTECTED]
Sent: 11/09/2000 12:02:53 PM
Sub
n the library, but
they remained in private state,
and the command to change to scratch didn't succeed.
The tape wan't change status because the volhistory entry was not
removed.
Could you change the status of the tapes from private to scratch?
Thanks
Maria
- Original Message -----
From
FULLY agree with you Maria. After many different trials, I decided to to
use Move Media for both directions, based on the Copy Storage Pool,
followed by an update status ReadOnly->Offsite.
I am not using nor running the cmd option.
To send tapes offsite, the move media is ejecting the tape, chan
The work-around I found in the meantime is write a script which is
looking what backupset will expire, to call the tape back from off-site,
check it in with PRIVATE status and then make the backupset expire. That
way, it is ok but the MAIN condition is to have the tape in the library
before runni
Hello,
I have, on TSM 3.7.3, the following jobs :
- Generate daily backupsets and checkout for offsite storage
- Deleting the backupsets older than 30days via the following command :
del backupset * * enddate=today-30 and calling the tape back on site
A query backupset shows that it succeeded
running TSM 3.7.3 - I don't use the DRM
module option.
Many many thanks in advane
Ruddy Stouder
System Engineer
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de Louvain-La-Neuve
B- 1435 Mont-Saint-Guibert
[EMAIL PROTECTED]
http://www.irislink.com
Tel: +32 (0)10 48 75 10 - Fax: +32 (0)10
Larry,
Could you run the command : Q VOLHIST and make a search on 000387, so we
can see everything related to
this media.
Ruddy
-Original Message-
From: Lawrence Clark [mailto:[EMAIL PROTECTED]]
Sent: mercredi 11 octobre 2000 16:16
To: [EMAIL PROTECTED]
Subject: Re: Error deleting trans
May be this could help you. I found some documentation about REUSEDELAY
parameter :
REUSEDELAY parameter : This parameter specifies the number of days that
must elapse before a volume can be reused or returned to scratch status,
after all files have been expired, deleted, or moved from the volume
55 matches
Mail list logo
