Hi,
One of our two TSM servers hit with TSM table locking at 5.5.0 with
performing a long running restore. We upgraded to 5.5.1 and have been in
a steady state since.
TSM OS AIX, 5.3
Tivoli Storage Manager Extended Edition 5.5.1.0 currently
However, our second TSM server which backs up to a
Hello TSMers,
What constitutes the TSM server to backup a node which is moved to a new
piece of like hardware and keeps the same nodename and ip address?
We are migrating a couple servers from a remote location that are
currently backing up to a TSM server at this remote location which is at
TSM
Richard,
Thanks for the reply and suggestions. We have a tried a few of your
suggestions.IBM TSM support did have us run the following show
commands.I just tried to run 'show memory' on this server and had to
break out of the command because it began to cause failures with object
retriev
Hello,
I was wondering if anyone is experiencing memory issues since upgrading to
TSM server 5.5 and installation of Centera SDK 3.2.1?
Starting with TSM 5.5 the Centera SDK had to be installed separately where
in the past the Centera SDK was part of the install package. We have
noticed that si
We use domain and mgmtclasses by platform which seems to work for our
environment. Aix, Linux,Wintel,,Db2,Domino,etc.
For example:
Aix_pd Policy Domain for AIX clients
Aix_ps Policy Set for Aix clients
Aix_mc Description= 'MC for AIX clients'
Nancy Backhaus
Enterprise Systems
HealthNow
Backgroud:
TSM - 5.3.2.2
AIX -5.3.3
Library - ADIC I2000 Scalar,with IBM LTO2 drives, LTO2 fuji tapes
Currently have a partitioned library:
1st partition - 16 drives
2nd partition -2 drives
We are eliminating the 2nd partition and moving the 2 drives and 50
slots from the 2nd partition over t
not allot of information right now for you...
1. We chose the EMCs' CDL 4100 - In the process of implementing it
within the next few weeks.
2. Will keep you posted.
3. Will keep you posted.
4. Within the next few months we will be adding addition environments.
5. Wish List- down the road
Adam,
We are use TSM Extended Edition(not TSM DRP). Our setup is as follows
with Content Mgr. You are correct, CM controls the data retention. I
believe even if you want to keep the data longer in TSM, and CM already
deleted the data, you would not be able to restore the data without the
point
19-266-8777
[EMAIL PROTECTED]
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Nancy L Backhaus
Sent: Wednesday, December 06, 2006 1:20 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Survey Question for Virtual Tape Users: What Vendors
are you using fo
Background:
Tivoli Storage Manager Extended Edition 5.3.2.2
Op System AIX 5.3 ML 3
Nightly Backup 2 -2 1/2 TB
Library - ADIC I2000 Scalar
18 LTO Tape Drives
LTO 2 Tapes
600 slots
Clients - 135 (Wintel)
AIX -26 (Sybase, SQL, and DB2)
We are looking into Virtual Tape Technology for our environment.
Hello,
Anyone know what the max number of sessions allowed by Centera is?
help update devclass CENTERA
MOUNTLimit
Specifies the new maximum number of sessions accessing the Centera
device. This parameter is optional. You can specify any number from 0
or greater; however, the sum o
egards,
Zareyna Salim
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Nancy L Backhaus
Sent: Wednesday, July 12, 2006 11:40 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] SQL2062N An error occurred while accessing media, Reason
Code: "137"
the permissions on that file in relation to the active user?
Good Luck.
Gr. Ilja
-Oorspronkelijk bericht-
Van: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Namens Nancy
L Backhaus
Verzonden: dinsdag 11 juli 2006 20:14
Aan: ADSM-L@VM.MARIST.EDU
Onderwerp: oddevaix:/home/archive>db2 backup db arch
TSM Server 5.3.2.2
TSM DB2 Client 5.3.0.0
DB2 8.2.0
Trying to help our DB2 Admins get a backup. I know very little about
DB2, so any help is appreciated.
What we have tried/verified:
We can run db2adutl from the client - it was successful
I see in the 'Backing Up DB2 Using TSM' book, under
s Sunday and roll forward the entire week, but this is very rare
(we haven't needed this yet.).
Nancy L Backhaus <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager"
06/29/2006 06:52 AM
Please respond to
"ADSM: Dist Stor Manager"
To
ADSM-L@VM.MARIST.EDU
cc
Su
TSM Server 5.3.2.2
TSM O/S 5.3 M 3
OS: Windows 2000 Adv SP4 Current Hotifex
Domino: 6.5.4 FP 2
TSM Client: 5.2.3.4
TDP Client:5.1.5.1
Does the TDP incremental backup utilize the same information as a the full
backup to TSM, for example the date and time, DB ID?The problem we
noticed is tha
TSM Server 5.3.2.2
AIX 5.3 ML 3, 32 bit
Before I turn this setting on ' SANDISCOVERY ON', just checking to see if
anyone is running similiar levels and could confirm that they haven't had
any issues after adding it.
*I did see a couple hits with issues for Solaris, and AIX 5.2 64bit.
Thank You.
Problem: TSM doesn't have enough time during the day to drain all of the
diskpools down to 0% before client backups start in the afternoon.So,
on our declared disaster day, one of our critical small DB2 databases was
still on disk never going to tape. Because migration selects the largest
c
Going soon to a disaster recovery test soon. and taking our copy storage
pool tapes. I have a question about how the primary tapes get marked,
was a bit fuzzy last time with my notes during the test.
Background:
TSM 5.3.2.2
AIX 5.3 - Op Sys
Library at Sterling Forest: 3584
LTO 2 drives with L
Background:
TSM Ver 5.3.2.2
Op Sys 5.3
NO HSM
Just confirming from the admin guide..
Once I run a delete filespace node_name filespacename t=a command. The
data is deleted from primary and copy pools.
The only way I would get that data back would be in a TSM db
restore...right?
Nancy Back
Trying to get a feel out in the TSM world of how many rely of us rely on
only TSM for restoring Wintel Operating Systems verses using NT Backup
Utility for Disaster Recovery.
Background:
TSM Server 5.3.2.2 :TSM Operating System AIX 5.3
125 Wintel Servers, Windows 2003 and Windows 2000, a couple
Hi Andrew,
I meant to phrase my post as a asking a question..sorry about that.
The client is Windows 2003, base level
Ntbackup -ran fine
ASR Wizard - waiting for mount message, hanging
Thanks.
Nancy Backhaus
Enterprise Systems
HealthNow, NY
716-887-7979
Andrew Raibeck <[EMAIL PROTECTED]
TSM Background:
TSM Server: 5.3.2.2
TSM Wintel Client Level: 5.3.2.2
Have restarted the sched service, permissions are fine. Trying to
manually backup asr via command 'dsmc backup asr' to recreate the
error.Just hanging on ASR backup.
ANS1468E Backing up Automated System Recovery (ASR
TSM Background:
TSM Version 5.3.2.2
OS AIX 5.3 Mod 3
ESX Version - 2.5 then eventually upgrade to 3
Is there a TSM agent(for windows) to backup the guest os files, and if yes
where is it located on the ftp site?
Nancy Backhaus
Enterprise Systems
HealthNow, NY
716-887-7979
CONFIDENTIALITY N
There is an
out-of-sync problem in the library inventory (internal). There is a tape
who's barcode it didn't read during the last scan pass or you had some
kind of library error.
In fact, I just did one..... AUDIT
LIBR checkl=b
Nancy L Backhaus
Anyone see this error below? Looking for direction/suggestions?
The tape(s) do actually does dismount. The issue is occurring on
different drives. All volumes are online, no unavail, no damaged, etc. I
audited the library, it was a successful audit checklabel=barcode.
**Background - Updated
Where do I find the recommended defaults for AIX and Window ba clients at
client versions 5.2 and 5.3 on the IBM website.
AIX client - TSM client version 5.2.2.0
dsmerror.log>
04/02/06 04:38:38 ANS1809W Session is lost; initializing session reopen
proced
ure.
04/02/06 04:38:39 ANS1809W Se
MIME-Version: 1.0
X-Mailer: Lotus Notes Release 5.0.11 July 24, 2002
Message-ID: <[EMAIL PROTECTED]>
From: Nancy L Backhaus <[EMAIL PROTECTED]>
Date: Wed, 29 Mar 2006 13:36:25 -0500
X-MIMETrack: Serialize by Router on NSB01/HealthNow(Release 6.5.4FP2|September
12, 2005) at
03/29/2
Hello,
We are still seeing the shadow copy issue in 5.3.2.2. Anyone else still
seeing the same issue or do I need to open a call with IBM?
TSM Server - 5.3.2.2
Op System AIX 5.3
TSM Windows 2003 Client - 5.3.2.2
snipit from dsmerror.log
03/13/2006 00:11:31 CreateSnapshotSet(): pAsync->QueryS
I believe you have to have TSM DRP.
We have recently implemented TSM, Content Manager OnDemand, and Centera
as the storage device. Content Manager OnDemand controls the retention
settings, and TSM is only the api to Centera. We have TSM Extended
Edition. I believe in order for retention to b
ume UNKNOWN inaccessible"
Since TSM cant mount the diskpool volume, are you sure that ALL data is
in the copypool? And if the data is in the copypool,
is that tape TSM requests available?
//Henrik
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
Hello,
Background:
TSM Server 5.2.2.0
TSM is on AIX Op System - Version 5.3
Windows 2003 Domain Controller(no service packs), TSM Client Version
5.2.3.4
At our Disaster Recovery Site Test, and having a problem restoring system
state. We can restore files but not system files. Those pools are
r marker sounds like the best to me).
Tom Kauffman
NIBCO, Inc
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Nancy L Backhaus
Sent: Tuesday, December 13, 2005 12:17 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Adding additional sticker to lto tapes for
David,
Thank You for your help.
I guess I will have to order a couple of silver sharpies. Sterling
Forest is requesting us to put our contract number, but we might put
something like our complany name on them( HN, WNY) so that we don't have
to do this again if we switch dr sites.
Thanks again.
Hello,
We have a disaster recovery test scheduled soon for IBM Sterling Forest,
NY site. We have been asked to add an additional sticker to all our LTO
1 and LTO2 tapes as a unique identifier for the disaster recovery
test(about 600 tapes) while at the DR test site besides the barcode label.
I had a PMR opened and received this response from support...
The efix exposed a code error in TSM. APAR IC47636 has been opened for
this issue. The fix is anticipated, no guarantees, subject to change, at
the discretion of IBM, to be in TSM 5.2.7 set for 12/16/05.
Nancy Backhaus
Enterprise S
I believe IBM TSM is working on this. I opened a PMR with TSM, and the
support person stated that there are 5 other new pmrs on this same issue.
I am awaiting feedback from TSM support on this issue.
We are at TSM Version 5.2.3.5, AIX OS Level 5.3 Mod 2 - We just upgraded
the AIX OS to 5.3 Mod 3
Hello.
Looking for setup information on TSM(AIX O/S) and EMC Centera? I did find
some info on the Tivoli IBM website, but looking for more setup, best
practices, gotchas'..
Thank You.
Nancy Backhaus
Enterprise Systems
[EMAIL PROTECTED]
Office: (716) 887-7979
Cell: (716) 609-2138
CONFIDENTIAL
TSM Version 5.2.3.5
AIX O/S 5.3
Library - ADIC I2000 Scalar, partitioned library,10 drive & 2 drive
IBM drives -LTO 2
We had to move slots over from one partition to the other(due to high
utilization), pending slot/drive order.
What is the correct procedure?
Steps:
Killed all processes/sessions
Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Nancy L Backhaus
Sent: Wednesday, August 03, 2005 2:28 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Anyone backing up Cisco Unity Product to TSM
(Voicemail only)
Hello,
I have been instructed to find out if there is any other TSM
envir
Hello,
I have been instructed to find out if there is any other TSM environments
backing up Cisco Unity for voicemail to TSM. Looking for feedback on any
gotcha's, whitepaper, info, etc.
I looked and didn't find any info on Tivoli IBM site, ADSM site.
Background: Cisco Unity
Cisco Unity Versio
Background - TSM Server 5.2.3.5
Oper System - 5.2 Mod 2
AIX Client Involved - TSM client version, 5.2.2.0. AIX oper system 5.2
mod 2
SQL Backtrack Version- 4.4.10.2
Yesterday, we received ANS1017E (-50) message with a sybase backup(2nd
time error occurred a couple of months ago with a db2 datab
little glitch biting us several days in a row before
they
figured it out (when it did come back up the volumes were toast).
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Nancy L Backhaus
Sent: Wednesday, May 04, 2005 1:09 PM
To: ADSM-L@VM.MARIST.EDU
Primary Pool Disk - so if I have to run a fix=yes, there is 'NO' copy in a
backup poo,, I would then have to rerun the backups.
Nancy Backhaus
Enterprise Systems
[EMAIL PROTECTED]
Office: (716) 887-7979
Cell: (716) 609-2138
- Forwarded by Nancy L Backhaus/HealthNow on 05/04/200
TSM Server 5.2.3.5
AIX Operating System 5.2
We have lost two drives on a single ATA RAID array. EMC CE is on site and
working with the EMC SAC to resolve the problem. We brought TSM Server
down while EMC is working on the issue. I started receiving the
following errors before we stop all proce
Background:
TSM Server 5.2.3.5
AIX Op System 5.2.2.0, P650 box
Library -ADIC I2000 Scaler, LTO 2 Drives
Looking for feedback from the group.
We have currently have a partioned library, 10 drives for all our system
backup. The other library partition, with 2 drives for content manager.
We are us
Looking for help to exclude the following directory from our remote
servers.
Background Info-
TSM Server:
Version 5.2.3.5
AIX 5.2
Client:
Win2003 Server
Version 5.2.3.5
Tried this to no avail.
Exclude.dir D:\DFSroot
Exclude.dir ?:\DFSroot
Exclude.dir \\fso01\d$\dfsroot\
Exclude ?:\DFSroot\*
E
Background
TSM - 5.2.3.5
AIX- 5.2 Mod 4
One of our client admins just recently installed sql backtrack obsi module
on one of our windows server for testing (node name - dbb05). The backup
is working fine , but I do not know how to view/verify that the backups
are going to the new storage pools(
We have already switched the scsi cables, but I can re-visit it again. The
vendor looks at the drive snapshots..when the error occurs..and everything
looks fine on their end.
Nancy Backhaus
Enterprise Systems
[EMAIL PROTECTED]
Office: (716) 887-7979
Cell: (716) 609-2138
Richard Sims <[EMAIL
Background:
TSM Server 5.2.3.5
AIX OS 5.2
Library-ADIC I2000 Scaler (LTO 2 Drives)
Receiving this error intermittently on both partitions of TSM on LTO1
tapes(Imation) and new LTO 2(fuji) tapes ...TSM generates the ANR8311E
message on a brand new LTO 2 tape in our 2nd instance of TSM. AIX, errp
please disregard , fileset tivoli.tsm.license.rte needed to be loaded.
Nancy Backhaus
Enterprise Systems
[EMAIL PROTECTED]
Office: (716) 887-7979
Cell: (716) 609-2138
- Forwarded by Nancy L Backhaus/HealthNow on 12/15/2004 11:36 AM -
Nancy L Backhaus
12/15/2004 10:53 AM
To
ert5.2.0.0 COMMITTED IBM Tivoli Storage M
License Certificates
Nancy Backhaus
Enterprise Systems
[EMAIL PROTECTED]
Office: (716) 887-7979
Cell: (716) 609-2138
- Forwarded by Nancy L Backhaus/HealthNow on 12/15/2004 10:51 AM -
Nanc
Background:
AIX Operating System 5.2 Mod 4
TSM 5.2.3.5
After bring up TSM, getting the following error in actlog..
12/15/04 10:11:30 ANR9613W Error loading ./dsmlicense for Licensing
functio
n: Exec format error.
I then was going to register a license...I receive the f
How do I combine these two scripts? I want to be able to see a breakdown
by stg pools & breakdown of scratch/privates in the stgpools.
select status, count(*) from libvolumes where library_name = 'LTOLIB'
group by status
I have this..but, I really want to see the scratch/private breakdown?
s
We too ran 5.2.3.4 for 3 weeks before crashing once actually on 11/10.
Once we heard that the patch was pulled from the site & fix wasn't due out
until 11/22 we opted to go back to 5.2.3.3 for our environment.
Nancy Backhaus
Enterprise Systems
[EMAIL PROTECTED]
Office: (716) 887-7979
Cell: (716)
Thank You very much Neil.
Nancy Backhaus
Enterprise Systems
[EMAIL PROTECTED]
Office: (716) 887-7979
Cell: (716) 609-2138
Neil Schofield <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
11/10/2004 09:26 AM
Please respond to "ADSM: Dist Stor Manager"
To:
Hello, Another question...
Background:
TSM Storage Manager: Version 5.2.3.4
AIX OpSystem: 5.2.2.0
I have a customer that is requesting that 2 files be permanently removed
from TSM(classified type file)...including tape backup(which will be on
tape for 180 days).
Now I found the technote on Tiv
Backhaus
Enterprise Systems
[EMAIL PROTECTED]
Office: (716) 887-7979
Cell: (716) 609-2138
Richard Sims <[EMAIL PROTECTED]>
11/05/2004 02:07 PM
To: Nancy L Backhaus <[EMAIL PROTECTED]>
cc:
Subject:Re: Where did my scratch tapes go?
On Nov 5, 2004
Hello,
Background:
TSM Version 5.2.3.4
AIX Operating System Version 5.2.2.0
2 libraries - one scratch count is steady, my LTOLIB library scratch count
is too low, privates too high.
What is happening? Where do I begin looking?
11/04/04
STATUS Unnamed[2]
-- ---
C
I looked at the activity log for the 2nd instance of TSM at the time of
the error is occurring at night. Its only occurring on off hours for
that 2nd instance, which brought me back to the act log. It looks like
when our content manager(NODE9CM), starts it's session, the error/message
occurs.
Background: TSM Version 5.2.3.4
Op System: AIX 5.1.5.0
Library: Adic Scaler, I200, partioned library, (12 drives)
I am trying to figure out what this error means in the AIX, errpt.
ADSM_DD_LOG4, looks like when our librarians are opening the bulk door for
the one library (no biggie, more infor
Our management class is setup that the maximum number of versions
permitted is 3, I have a customer requesting that wants to know if can
keep let's say...6 active versions of only one particular file on a
server. Is that even possible?
Background: TSM Server Version 5.2.3.4
AIX Operating Syst
Hello,
Background info.
TSM Version 5.2.3
AIX operation system 5.1.5.
I started seeing these errors in my activity log past couple of days? This
admin id was not registered(obviously from the text) We had bounced our
server yesterday for maintenance on our library, I thought it might clear
up
/usr/tivoli/tsm2/dsmserv.log
#
print "$(date '+%D %T') Updating TSM Administrarive Web GUI"
cd /usr/tivoli/tsm2
dsmserv runfile /usr/tivoli/tsm/server/webimages/dsmserv.idl
[EMAIL PROTECTED]
Nancy L Backhaus <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager"
yes, we ran runfile dsmserv.idl.
Nancy Backhaus
Enterprise Systems
[EMAIL PROTECTED]
Office: (716) 887-7979
Cell: (716) 609-2138
Jim Sporer <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
09/16/2004 03:06 PM
Please respond to "ADSM: Dist Stor Manager"
T
Hello,
We are setting up a 2nd instance of TSM on the same server. The http is
set in the config file to 1581. We can sign into the web gui on the 2nd
instance, can use the command line. But, the left hand-side, Server
Administration drop down menu is coming up with 'Page cannot be found
error
Hello TSMers,
What is the command to disable all client schedules from contacting AIX
server? I can't seem to find it...arrggghh.
Nancy Backhaus
Enterprise Systems
[EMAIL PROTECTED]
Phone: (716) 887-7979
Pager: (716) 470-0141
CONFIDENTIALITY NOTICE: This email message and any attachments are
Hello Everybody,
Looking for feedback on stability issues with the following scenerio?
Anyone know of any issues with running TSM 5.2 and AIX 5.1?
Current Setup:
Tivoli Version 5.1.6.5
Aix 5.1
P660
Library =IBM 3584-LTO 1
We are planning to upgrade Tivoli to 5.2.3 while AIX is still at 5.1
1.
e our performance and capacity overall and to assist
for email archiving.
3584 TSM Server -Version 5.1.6.5, on AIX RS/6000
103 window clients
Lotus Notes TDP 5.1.5.0
Lotus Notes Release 5.0.11
Thank You,
Nancy L Backhaus
Phone: (716) 887-7979 Email: [EMAIL PROTECTED]
Pager: (716) 470-0141 Page: [
69 matches
Mail list logo
