These drives are FC-AL, which tells you they are loop devices. On the switch,
you should see as L-port. Please refer to prod doc for first troubleshooting
and if you need, send the output of 'SupportShow' to IBM.
Gus
Jin Bae Chi (Gus)
System Administrator
Data Center, CSCC
614-28
O
backups.
> If you need more information please let me know.
>
> My concerns are that we will slow down the client backups when we have
so
> many clients running in a small backup window.
> If we use SATA or FC ATA drive for the primary disk storage pool.
> Thanks
>
Matt,
Can you share more about the distance and SAN infrastructure that TSM I/O
travels through? Many answers would be depending on them.
As we know, TSM DB mirroring is at the SW level after OS or HW. First, try to
avoid the redundant mirroring at TSM application with OS or HW since you
con
Justin,
You may need to tell us more about your configuration and how much data and how
long you need to keep the data before any migration with cache turned on/off.
As you mentioned, you may not need the enterprise class stg for these
particular diskpools unless your SLA requires certain stri
Phil,
If your SAN is running based on IBM, DS4000 series, you may take a look at
DS4100 SATA solution. I found that it has competitive price and perf is quite
acceptable for tier 2 disk storage for Netware OS. Depending on what type of
HSM solution for Netware, you may need to spend more time
BMR concept would differ depending on underlying system design. If you have
FC/IP SAN environment, see the options of booting off SAN and also, snapshot of
root filesystem of Windows. If you have VMware, clustered or not, needs virtual
machine restore, which is just a big file. It will be much q
Yes, you can as long as TSM supports those libr. There are more than one way to
do it. Consider creating a new stgpool with destination tape libr and migrate
to it using stg hierarchy using 'NEXT' parameter with DEF LIBR or UPD LIBR.
Gus
>>> [EMAIL PROTECTED] 04/18/05 4:01 AM >>>
Hi all,
I
You may need to look at more than one solution here. Please check if you
can confirm that at LAN switch level the overall utilization of TSM port
is higher than 85% AND if multiple TSM clients have backup problems
because of 'network bottleneck' on TSM GigEth interface. Etherchannel
and load balanc
If SCSI is directly attached to only one server and the other cannot see
at all, I don't see how you will make it shared. Both servers must see
any shared drive at OS level. If FC drive on LTO libr is too expensive,
you can take a look at IBM 2108 SAN Data gateway router.
Gus
>>> [EMAIL PROTE
Please check 'q libr f=d', 'q path f=d'.
Gus
>>> [EMAIL PROTECTED] 03/25/05 6:31 AM >>>
Hi all
When I define drive in a 3582 library . I get the following :
Tsm> q dr
Library Name Drive Name Device Type On-Line
--- ---
Mark,
Just wanted to say thank you for doing this. It's a tremendous help.
I'm sure many more out there would say the same. Thanks again.
Gus
>>> [EMAIL PROTECTED] 2/7/2005 8:48:25 AM >>>
This Frequently Asked Question list for the ADSM-L mailing list is
posted on the first day of each month.
The AIX client that you can download from FTP site, worked for me on
both jfs and jfs2.
Jin Bae Chi (Gus)
System Administrator
Data Center, CSCC
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 2/4/2005 12:25:07 PM >>>
Hello,
on AIX clients with jfs an
', 'retryperiod'
Jin Bae Chi (Gus)
System Administrator
Data Center, CSCC
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 2/4/2005 12:36:50 PM >>>
Hi
Does anyone know on a HACMP cluster, whether if the failover
occurs
during the ac
another challenge for booting because multiple
LPAR hosts can be sharing the same HBAs and I don't know how SAN switch
would take them with same World Wide names. Just a few more thoughts on
planning. Thanks.
Jin Bae Chi (Gus)
System Administrator
Data Center, CSCC
614-287-5270
614-287-548
inted to the cluster IPaddress, webclient didn't
work. What would I be missing here?
Thanks again for your kind response,
Jin Bae Chi (Gus)
System Administrator
Data Center, CSCC
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 1/21/2005 8:13:21 AM >
SCRIPT so that when
shared volume gets moved to the target node? The problem I see is that
the scheduler would be loaded multiple times on different nodes until
one that doesn't have the shared vol fails asking password. Can you
share how you set those up and configured? Thanks.
Gus
Go to TSM server reference book; Appendix A. IBM Tivoli Storage Manager
Utiliites.
Use ;
1. dsmfmt cmd to format additional log files
2. dsmserv extend cmd to extend those additional space to tsm log.
3. start TSM server in foreground with dsmserv cmd.
Good luck.
Gus
Jin Bae Chi (Gus)
System
Try 'q se f=d'. It will show any session with tape. Compare with 'q mo'.
Hope this helps.
Gus
>>> [EMAIL PROTECTED] 1/9/2005 4:29:07 PM >>>
Hello list members,
is there a way to identify which session is holding particular drive ?
I've been playing with "show asm, show asq" commands recently w
or upd vol N00275 acc=readw
gus
Jin Bae Chi (Gus)
System Administrator
Data Center, CSCC
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 12/13/2004 2:55:51 PM >>>
On Dec 13, 2004, at 2:16 PM, Timothy Hughes wrote:
> Hello all,
>
> Not sur
sure with your network core switches set with the
same VLAN or subnet. I don't know if you have HA set on these hosts, but
one more thing that you can try with SAN...
Gus
Jin Bae Chi (Gus)
System Administrator
Data Center, CSCC
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
>>> [E
TSMers,
TSM server 5.2.2 on AIX 5.2.2
TSM cliient NetWare 6.5
We were setting up a few new NetWare NDS replica servers (xSeries 345)
and tried NDS incremental backup. I noticed that;
1. 'dsmc i NDS:' will backup all the objects again and again as if
there is no true incremental backup of it. Do
Hi, TSMers,
Recently I created new copypool on LTO 3584 library and backed up
primary stgpools to it. Now that I need to delete the old copypool with
multiple Magstar tape volumes, is there any quick way of doing it
without deleting each individual volume first then old copystgpool?
Thanks for you
Neil and Muthyam. Got it! Thanks for your kind clarification.
Gus
>>> [EMAIL PROTECTED] 8/11/2004 11:57:52 AM >>>
Gus
I'm not sure I've understood your setup. Are you saying you have a
primary
disk pool, a primary tape (LTO) pool as the destination for migration
from
the disk pool, and a copy
I checked tape mounts when migrating from diskpool to tapepool and saw
only one mount from that tapepool and no tape mount from any copypool.
Thanks.
Gus
>>> [EMAIL PROTECTED] 8/11/2004 9:35:50 AM >>>
** High Priority **
I would check for mounts and where that tapes belongs to when that job
is
Hi, TSMers,
My primary LTO tapepools have two copypools, on and offsite as COPYPOOL
option for simultaneous writes when migrating data from diskpool. How
would you verify if this option is working for you from server console?
Thanks much.
Gus
What version of NW are you running? We have problems with some of NW 6.5, not being
able to even start the scheduler and client, TSM client 5.2.2, server 5.2.2. It
doesn't log anything neither on TSM server or client. TSM client 5.2.3 doesn't seem to
have any fix for this problem.
Gus
>>> [EM
Update disk storage pool with NEXTstgpool=NASstgpool, highmig=xx
lowmig=xx, so that when reached higmig %, TSM will migrate data to
NASstgpool until lowmig%.
Gus
>>> [EMAIL PROTECTED] 6/25/2004 3:29:43 AM >>>
Dear All,
Can you please elaborate on keeping storage pool on NAS (NetApps)?
My clien
reateCD, and install Atape.)
Be sure the system you create the CD on has all device filesets
installed
(except maybe Atape), so the CD will work on a variety of system and
hardware configurations.
Jin Bae Chi
I'm considering to buy sysback product soon. Here are some questions if you don't
mind..
― How would sysback make bootable CD if it doesn't fit into 1 CD?
― Can I make mksysb and savevg on 1 set of CD? so that I don't even need to use TSM
restore?
― What kind of IBM product do you use as CD
Bill,
One more question here if you don't mind.
I'm using your cmds currently and work fine for me. But always I need
manually check if all tape volumes I requested had come back to my site
before I check them in as scratch ones. If there is any discrepancy on
the list, for instance some of tape d
If you migrated to 5.2.2 correctly, none of existing clients should NOT ask for the
password. Please review again what you plan to do...
gus
>>> [EMAIL PROTECTED] 3/3/2004 8:17:07 AM >>>
Hi to all
This week I upgrade my TSM server version from 5.1.8.0 to 5.2.2.0 and my O.S
from windows NT4 to
One more question about ClientOptionSet on the server.
How do you 'delete or dissociate' this option from node definition on server without
deleting it from server?
I used it for a while and now I don't need anymore. 'dsm.opt' will have it instead.
Thanks.
Gus
>>> [EMAIL PROTECTED] 2/26/200
sure you read the migration
guide and do better preps before you do it. If you have any other
application running, other than TSM, you need to check if is OK with
4.3.3. and 5.2. TSM 5.1.6 was ok and working good after migration to AIX
5.2.
Gus
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center
connect to LTO drives.
Anyone working with multipath failover config?
Thanks again for your expertise !!
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center, CSCC
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
What you are really doing is only incremental bkp, being the first time
as full bkp because everything is new to TSM. If you want to keep a node
for a year, you can specify password expiration to 365 days. You also
will need to consider how many of active/inactive version you want to
keep.
Gus
Hi, Michael,
I'm almost in the same boat you are, but having some difficulties
around. I finally got some dedicated fibres between two loc although
they will be completely done later this year. I've been trying hard to
do the same thing for a long time, but there are always some other
factors that
If you don't mind, I would like to add a question here as I plan to migrate AIX 4.3.3
to 5.2. I've seen on this list about if TSM 5.1.6 will work on AIX 5.2 or not and
there were different options. If it doesn't work, or only TSM 5.2 is supported, I may
change my migration path. Thanks for your
Can
>>> [EMAIL PROTECTED] 10/01/03 02:00PM >>>
show volumeusage [nodename]
certainly helps...note too that the "show" commands are undocumented and
unsupported.
On Wed, 1 Oct 2003, Rowan O'Donoghue wrote:
> Agreed, it is probably the most important shortcoming!
>
> In terms of when a DR is per
Remember that tar cmd writes only 10k bytes and dd cmd you gave 256k. So, tar cmd can
give the impression of poor performance. Also, FC address could be another factor when
used as sigle with mig from disk to tape. My 2 cents...
Gus
>>> [EMAIL PROTECTED] 07/22/03 02:41PM >>>
The test to move
Experts,
Trying to installl TSM baclient 5.1.0.0 on Windows 2000 SP3 server with oslevel 5.0.
When start web client managed by CAD gave a BLUE screen that said .. no exception
handling...and a bunch of 0 numbers. Event from Windows shows the followings;
Event Type: Error
Event Source:
Have you considered RAID 0+1 or 10? It give you mirror copies and stripping. It may
depend whether your RAID controller supports it or not. thanks.
>>> [EMAIL PROTECTED] 07/08/03 12:13AM >>>
Is there anyone(else) out there relying only on RAID for TSM fault
tolerance? I just attended the Advan
You may have a little confusion about Reclamation and Migration.
Do 'q stg xxxpool f=d' and find 'Reclamation Threshold' which governs how reclamation
will be done.
Highmig=xx and lowmig=xx are parameters that works only for Migration of data from one
pool to another. When a stg reaches highmig
(i.e. cold). The only
reason you may want to use the TDP is if you mount the pseudo volume on
another machine to reduce I/O impact
on the main host, otherwise it benefits for cold backups.
Cheers, Suad
--
- Original Message -
From: "Jin Bae Chi" <[EMAIL PROTECTED]>
To: <
machine to reduce I/O impact
on the main host, otherwise it benefits for cold backups.
Cheers, Suad
--
- Original Message -
From: "Jin Bae Chi" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, March 28, 2003 6:14 AM
Subject: FastT700 with FlashCopy
TSMers,
TSMers,
We are about to get FastT700 with FlashCopy option. Has anyone had experience on this
FlashCopy for backup or/and report purposes? IBM said I can do backups from a
separated set of disks for FlashCopy, not from the original disks. We also run Oracle
with TDP product. I don't get how db w
ike to ask advice to anyone who has experience with this product. Thanks.
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center, CSCC
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
ached servers. Any comment will be appreciated. Thanks.
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center, CSCC
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
wait for server-free backup from
TSM for AIX platform? Any suggestion will be appreciated.
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center, CSCC
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
IP connection and multiple HBA for redundancy plus
HACMP settings, so actually I'm running out of slots Thanks.
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center, CSCC
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 02/27/03 11:45AM >>>
No.
Hi,
I use /etc/inittab file. If you're not familiar with AIX, please refer
to document;
http://publibn.boulder.ibm.com/doc_link/en_US/a_doc_lib/cmds/aixcmds3/mkitab.htm#HDRA3059129
Entries that you should add may look like the followings;
tivoliba:2:respawn:/usr/tivoli/tsm/client/ba/bin/dsmc sc
I use /etc/inittab file to bring dsmcad with ONCE option.
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center, CSCC
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 02/25/03 09:45AM >>>
Where is the best place for starting dsmcad during boot on AIX 4.3.
y big, but backups works great from TSM scheduler. I don't mean to
doubt your pain dealing with the product. Thanks.
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center, CSCC
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 02/06/03 12:04PM >>>
Due to
Bae Chi (Gus)
System Admin/Tivoli
Data Center, CSCC
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
You can find how to prepare disk vol on page 182 in TSM admin guide.
Gus
>>> [EMAIL PROTECTED] 01/28/03 07:32AM >>>
What is the procedure to increase the size of the DISK pool.
If I have a DISK POOL which is 2GB and if I want to doubel waht exactly do I
need to do ?
CAUTION - This message may
You may try to upd node with new password for tpd for Oracle and run again tdpconf
passw. I had a similar problem before and it worked for me. Good luck.
Gus
>>> [EMAIL PROTECTED] 01/13/03 04:59PM >>>
Maybe you have to do the tdpoconf password again.
Ne
comment will
be appreciated. Thanks.
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
ackup Novell servers through Fibre Channel? What would
be your suggestion to backup to tape library that resides on SAN? Thanks again for
your help!!
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
Hi, Joachim,
Could you share how to define tape capacity on devconfig file? I couldn't find any doc
about it. Thanks.
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 11/25/02 08:17AM >>>
have
start
'dsmadmc' with option flag for each server? I checked admin
documentation and couldn't find dsmadmc command option for this purpose.
Thanks for your help as always!
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
Peter,
Thanks for your reply. I'm glad there is a solution for this problem.
Can you tell me some more info about St Bernard OFM? Is it something
that I need to buy? How would that work with TSM client? Any web site
for product? Thanks again.
Jin Bae Chi (Gus)
System Admin/Tivoli
Data C
ckup, then post on command
line. Any comment will be appreciated. Thanks much!!
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
EMAIL PROTECTED]
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 10/30/02 11:13AM >>>
Hi All:
I'm currently running my TDP for Oracle backup manually from a UNIX
prompt.
I'd like to automate this through
Hi, TSMers,
We are told that IBM has promotion for NSM customers to facilitate the
migration to TSM. I heard they are offering a 'big' discount to migrate
to TSM 5.1. Anybody has experience on this issue and suggestion? Thanks
for your comment.
Regards,
Jin Bae Chi (Gus)
System Ad
of choice for Netware. I was thinking external DVD ROM for
Windows. Once I install the proper driver, the restore from backupset is
going to be fast for Windows servers. Thanks for your input!
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center
614-287-2496/5922
614-287-5488 Fax
[EMAIL
e share some insight?
Thanks for your help!
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center
614-287-2496/5922
614-287-5488 Fax
[EMAIL PROTECTED]
c.com/pdf/products/clariion/h711_tivoli_san.pdf
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center
614-287-2496/5922
614-287-5488 Fax
[EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 09/06/02 19:55 PM >>>
The NDMP specification contains a lot of latitude which means that TSM's
NDMP
.
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center
614-287-2496/5922
614-287-5488 Fax
[EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 09/05/02 12:57 PM >>>
I think it is for all NDMP compatible filers. Yes NetApp was a big
driver in the development of the standard, but I think it
have EMC
Clariion FC4500 and 4700 as NAS for network servers. Has anyone
experienced with NAS backup with this product or similar? I couldn't
find any documentation about what NAS products are supported with TSM
5.1. Your comment will help me tremendously!! Thanks a lot!!
Regards,
Jin Ba
Peter,
I just read your questions and it's very interesting for me, too. Can
you share with me how you configue ODBC to use with Excel? I'm kind of
new on ODBC. Thanks.
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center
614-287-2496/5922
614-287-5488 Fax
[EMAIL PROTECTED]
>>&g
upports to generate backupset or client image backup on
DVD-ROM? My clients wouldn't fit on 1 or 2 regular CD-ROM.
Thanks for your expertise!!
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED]
completely. Can
any one share with me some sample scripts that you are running for the
same purpose? Thanks much!!
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED]
.
Any tips for searching for used market? Thanks for your help as usual.
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED]
er will be sure of
numbers to move in and out. Thanks again for your help.
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED]
Nick,
In fact, something opposite happens to me. When I type 'help XXX' it
returns text messages in a very long long line. It never wraps text
line. I wander if I need to set up some parameter for the output of HELP
cmd. Thanks.
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-
01031: insufficient
privileges
Any help will be appreciated. Thanks.
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED]
Hi, TSMers,
Has any one had an experience on backing up a particular schema using
RMAN script through TSM scheduler? and also, can any one give an insight
of pro and con of running Oracle backup scripts from crontab (AIX) vs.
TSM scheduler?
Regards,
Jin Bae Chi (Gus)
Data Center
614-287-2496
Zlatko, Thanks for your insight and for correcting my questions. It
really helped me to think in a right way!
Regards,
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 07/05/02 04:50AM >>>
Next best choice is -
choice? I was thinking of Linux. Thanks.
Regards,
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 07/03/02 01:49PM >>>
If you have AIX installed already, I would hands-down recommend TSM on
AIX.
--
Joshua S. B
Gretchen,
I had a exact same plan to migrate from 4.2.2 to 5.1 in two weeks. I
guess I need to reschedule it until I gether better information. Would
you please keep us posted on this topic?
Regards,
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED
Thanks, Max,
I 'q log' and lowered the log full percentage and db backup got
triggered. Problem solved!! Thanks much again.
Regards,
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 06/19/02 11:32PM >>&g
Thanks for your advice. I have another question. Would automated daily
schedule be affected when expired password after 90 days? Will the
client scheduler be able to back up or fail after the specified
expiration? Thanks again.
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail
Hi, TSMers,
I'm about to upgrade our TSM 3.7.2 to 5.1 on AIX 4.3. Would you share
with me some helpful tips? Thanks much!!!
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED]
help.
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED]
l TDP for MS SQL? We
thought there wouldn't be a problem to back up only a few dump files
generated by SQL server. Should I install TDP on SQL sever in order to
back up ANY files from that server?
Thanks for your advice.
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED]
Hi, all,
I need to say big thank-you to all of you. Thanks for your advice and
patience with a novice with me. Everything is backing up normally. I'm
learning a lot! Thanks.
Gus.
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED]
>>> [EMAIL PR
schedules
due to
an error in timing. You should also be able to see if the clients are
receiving the schedules and what time they individually think they're
supposed to being their backups. Some basic troubleshooting goes a
long
way..
Regards,
Gerald Wichmann
Senior Systems Development Engineer
worked, but not
others. When it reaches the scheduled time, it gives status msg
'pending'. Do all baclients need to be restarted to pick up the new time
and start their regular schedules? Thanks for help.
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTE
n time. Do baclients need to be restarted after TSM server
having been rebooted ? If not, as you said, I'll wait tonight to see if
client schedules work. I just want to make sure that I don' need to do
anything else. Thanks for your help.
Jin Bae Chi (Gus)
Data Center
614-287-2496
614
epted date. Well, everything
looked normal.
When I checked this morning, all client scheduler had been MISSED. What
did I do wrong? Do I need to start admin scheduler from server manually?
how? Any comment will be appreciated. Thanks
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-ma
ently they
have client poll mode for their scheduler.
Thank again for your help.
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED]
Hi, all
One of client node had a Windows registry problem and can't reboot
itself. We need to reinstall Windows. Is possible to see what files has
been backed up from that particular node from server console or admin
web interface? I don't have access to it at all. Any help will be
appreciated. Th
know how. How do I restore all 'settings' of this particular
application (NCS scanning software). I appreciate your help. Thanks.
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED]
ntly are running ADSM 3.7 to backup all network servers and
workstations on campus. It's not working very efficiently...
Any comment will help me tremendously, Thanks you and you all.
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-mail: [EMAIL PROTECTED]
>>> [EMA
Hi, Everyone. Can anyone help me how to configue the AIX system in order
to make backups of regular daily production jobs runnign on it? and how
to prepare vault movement? Should I treat the AIX system as a clien
node? I just got off the classes and don't have any practical idea.
Please help!
We
94 matches
Mail list logo
