Hi List,
I`ve trouble with a TSM Backup Client.
Client (SuSE Linux 9.3 x86_64) 5.3.0.0 (API 64Bit)
Server (AIX 5.2) 5.1.65
Every night or at start/restart of the client I get this error:
09/16/2005 08:13:58 ANS2820E An interrupt has occurred.
The current operation will end and the client will sh
Hi Andrew,
IMHO, IBM SCSI libraries such as 3583 need the IBM tapedriver, not the TSM
driver...
Checkin with search=yes is quite straightforward once the cartridges are in
the library (Open door, take out elephant, stuff cartridges into slots,
close door, wait for automatic inventory, checkin tape
I'm pretty sure that the Web GUI does not prefill its list of what you can
backup based on the options file. It instead prefills it with a list of local
drives. The restore unlike the backup windows prefills its list based on what
filespaces have been backed up on the TSM server.
I think the
Yes
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Thorneycroft, Doug
Sent: Wednesday, September 14, 2005 4:00 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Reclamation/Audits running slow
Does Move data also run slow?
-Original Message---
Steve,
For a standard restore, the Exchange database files (.EDB and .STM)
are replaced during a restore. They ARE NOT written to a temporary
location.
However... if you are restoring into the Recovery Storage Group,
they are created anew... in a different location. You can point
the location of
Wanda,
There are also TDP's involved, so a backupset is out of question.
The bandwith does not allow to run a monthly 'full' backup by using other TSM
nodenames on the same server.
So only an export remains a possible solution.
I know that a full import of a node or of a file space will be
Client (W2K) 5.3.0.0
Server (AIX 5.2) 5.3.1.4
Receiving the below errors on one of our many nightly backups...
09/15/2005 03:21:53 ANS1999E Incremental processing of '\\r2wprodapp\f$'
stopped.
09/15/2005 03:21:53 ANS1030E The operating system refused a TSM request
for memory allocation.
TSM server 5.2.4.3
TSM TDP 5.2.1.0
Our Exchange admins are running out of room on some of their Exchange
servers and have a question about temp space used during a restore:
Question: It is my understanding that when you restore a database in
Exchange 2003 it creates a new temporary database during
Sandra,
As I re-read through this, I realize I made a mistake. Using delete
volume will not adhere to the reuse delay. Reclamation set to 1 will.
But I also think there are other things that should be considered, most
of which were addressed by Andy in other posts.
Sorry if my mistake cause you
Aah.. I get it, now. The SRV file being the Server binaries and stuff,
and CON being the management console; silly me, looking for TOR or
something like that.
Mike,
Any idea when 5.3.2 will be out? And are there any known
incompatibilities between the 5.3.2 TOR and the 5.2.2.5 AIX servers or
5.3.1
Look at the server VOLHISTORY; export tapes are recorded there.
I believe you will find that if an EXPORT spills to a second tape, the
second tape is recorded as "vol seq #2" of the export, not as an
independent tape like storage pool tapes are. I believe TSM has to
start reading at Vol seq #1.
Thanks for the answers Wanda.
Exporting all of the active backup data of all the servers in 1 command isn't
an issue of course, just one command and you are sure that you don't miss
anything.
But if the full export is eg 2 TB and a restore is asked of a file that is of
course at the end of t
As always, review the TSM Performance Tuning Guide.
TCPWindowsize is a classic network tuning knob which can have large
benefits where right value is chosen - which may require
experimentation.
Richard Sims
Check as well that the parameter TCP_DELAYED_ACKNOWLEDGEMENT=OFF on the Novell
server.
Switching it from the default 'ON' to OFF improved the backups times with a
factor of 3 at a customer.
best regards;
Kurt
Van: ADSM: Dist Stor Manager namens David E Ehres
All of our san attached disk comes thru a SVC. It's great!
David Ehresman
University of Louisville
>>> [EMAIL PROTECTED] 09/12/05 4:40 PM >>>
We are considering IBM's SVC (SAN Volume Controller) vitalization layer
in our new TSM server configuration.
Anyone currently using IBM's product?
The
When we had a similar problem Servergraph/TSM told us the bottleneck was the
network I/O. Upgrading the TSM server to a gig ethernet card and switch
dramatically improved the backup times of our Novel clients.
>>> [EMAIL PROTECTED] 09/12/05 1:43 PM >>>
Hello,
We have a Novell client who's back
I have a TSM server with a 3584 library. Before me, it was set up in the
normal tape pool and copy pools arrangement. However, because this is a
really lights out operation the copy tapes were not being ejected. So the
copypool tapes were no particularly good for DR and only usable for repair
of a
Has anyone seen something like this ? It does not consistently occur on
this particular file. Today it could be this and tomorrow it could be
another file. I can back up this file if I select it by itself or with
other files. This failure occurs when doing an incremental. In fact,
the file has
Thanks for letting me know that, I was somewhat concerned.
If I see it again I'll also call it in.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Rushforth, Tim
Sent: Thursday, September 15, 2005 11:54 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: In
We've had to do this for a few problems in the past including one that
sounds like yours (search the archive). In previous versions the
commands were Delete Archdescriptions and convert archive.
If you are running in rollforward mode, these command take a lot of log
space so be sure to watch that
We've seen something similar with the internal server error message.
We've got a PMR (#63524) open on it and have sent support traces.
We are also at 5.3.1.3. We've gotten the error on reclaims, move data,
migrations and client backing up directly to tape. We've had about 6
occurrences of the p
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Kurt Beyers
Sent: Thursday, September 15, 2005 9:54 AM
To: ADSM-L@VM.MARIST.EDU
Subject: export import node metadata TSM database
Hi,
Is there any metadata of the exports stored in the TSM database?
I upgraded one server to 5.3.1.3 a couple of weeks ago.
Had one occurance of something similar; only my reclaim just said
"internal server error" and died.
Restarting reclaim didn't fix it.
But my reclaim was appending data to a "filling" tape that was almost
full.
I directed it to a different tap
Hi Maurice -
Depends on the situation.
The advantage of bringing the imported node back under a different name:
You can move it to a different domain where you can set the copy groups
so that the data doesn't expire.
If you only plan to have the filespace(s) around long enough to do 1
restore, t
Use the MOVE NODE command.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Alexander Lazarevich
Sent: Thursday, September 15, 2005 10:16 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] moving client node data from one library to another
TSM 5.3.1 on
We are trying to configure a Windows box to act as the CIFS mountpoint to
a CELERRA NAS.
Since there will be multiple owners/mounts/nodes to this box, we are
setting up the web-gui to handle the restores, etc. Due to the expected
large number of mounts, we will not be able to give every point a
d
Use the MOVE NODEDATA command.
Bill Boyer
"Some days you're the bug, some days you're the windshield" - ??
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Alexander
Lazarevich
Sent: Thursday, September 15, 2005 11:16 AM
To: ADSM-L@VM.MARIST.EDU
S
I've been advised by TSM support to run these 2 commands against the
nodes that are having problems displaying their archived files &
directories:
UNDO ARCHCONVERSION
CONVERT ARCHIVE
Has anyone out there had to use similar commands. Support says this is
a "known" problem.
Thanks again,
Scott
According to the IBM documentation the maximum size is 128GB, but the AIX
operating system has a limit of just under 64GB (setting it to 63GB works
fine).
JR Trimark
Lead Data Network Engineer
Aurora Health Care
414.647.3256 Voice
414.647.4999 Fax
414.222.2219 Pager
[EMAIL PROTECTED]
TSM 5.3.1 on win2K server.
We have two OVerland Neo 4100 libraries, one is LTO2 (two LTO2 drives) and
the other is LTO3 (two LTO3 drives). The libraries are seperate. TSM has
sepearete backup discspool->tape paths for each library. And policy sets
are setup accordingly for which clients we want t
It's in
ftp://ftp.software.ibm.com/storage/tivoli-storage-management/patches/server/NT/5.3.1.5/TSMCON5315_WIN.exe
Bill Boyer
"Some days you're the bug, some days you're the windshield" - ??
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Todd
Lu
Bingo!
Mike and Steve hit it. The password thing was not it, since it does
work for a while. After reading about IC44976, I found the trace file
and could see those error messages in the file. I am off to find the
latest patch for TOR 5.3.
Unfortunately, the files at
ftp://ftp.software.ibm.com/
Probably a memory shortage. Undoubtedly the 64-bit version requires more
memory for larger internal tables and such. Add more memory to the
machine, and then add more Database Cache. This memory shortage could be
right at the edge when running the 32-bit version, so that any small
thing which incre
Joni,
Try
order by "date"
Leigh
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Joni Moyer
Sent: 15 September 2005 14:53
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] SQL statement
Hi Everyone!
Does anyone know what I am doing wrong with this s
"date" is a reserved SQL word. And you have to remove the quotation marks.
select filespace_name,hl_name,ll_name,date(archive_date) as Adate,
class_name from archives where node_name='CS-NICE-STORAGE' and
archive_date>'06/30/2005' order by Adate
should do the trick.
HTH
Thomas Rupp
-Urspr
Hi,
Is there any metadata of the exports stored in the TSM database?
If I want to export eg two clients A and B to the same volume (eg a tape vol001
that has enough space of course), can I specify twice the command:
export node A filedata=backupactive devclass= VOL=vol001
export node B filed
Hi Everyone!
Does anyone know what I am doing wrong with this sql statement? I am
trying to get the file info. but it all comes down to the date. I just
want to report on the date that the data was archived before 6/3/2005, but
I can't figure out what I am doing wrong. Any suggestions? Thanks!
I have a client that just recently had the time reset and rebooted. It is
a Lotus Notes client. Every time the Automation schedule service resets,
after clean backup, it skips a day. I tried deleting and recreating the
"TSM dsmc sched" service, still showed 09/17/05 at 03:00. Then I thought
it
Hi all,
Since upgrade to TSM 5.3.1, I'm facing a strange problem affecting
reclamation on specific copypool dedicated to directories structure.
What happens is as follows :
09/15/05 09:34:28 ANR0984I Process 375 for SPACE RECLAMATION
started in the
BACKGROUND a
Does the library know that you have a bulk i/o?
Maybe you have to check the settings
- Original Message -
From: "Meadows, Andrew" <[EMAIL PROTECTED]>
To:
Sent: Thursday, September 15, 2005 1:50 PM
Subject: Re: [ADSM-L] 3583 library
> That's just the problem. If I put tapes in the io
On Thu, Sep 15, 2005 at 12:47:53PM +0200, Jurjen Oskam wrote:
> I have a problem with a scheduled command. The TSM server is 5.3.1.4 on AIX
> 5.3 ML2,
> the affected client is 5.2.2.0 on Red Hat Linux Advanced Server 2.1 (i386).
> SCHEDmode is PROMPTed, the client has MANAGEDSERVICES WEBCLIENT SC
Hi,
My exprience is that it is the dsmc programme that runs the scheduled jobs,
usually when things get "odd" we restart this scheduler process on the client.
dsmcad is the deamon required to run the web interface to do backup and
restores. But I am on Solaris not RD Linux.
Regards
Pete
-
That's just the problem. If I put tapes in the io door and do a search=bulk
labelsource=barcode and reply to the request nothing happens. No error message
nothing. If I manually pull them into empty slots in the library and do a
search=yes then I can label the tapes fine.
-
Only use searc
Here is a copy of the command I am typingin along with the error:
DEFINE DEVCLASS TESTFILE DEVTYPE=FILE MOUNTLIMIT=15 MAXCAPACITY=250G
DIRECTORY=/jrtestfiles SHARED=NO
09/15/05 06:36:47 ANR8366E DEFINE DEVCLASS: Invalid value for
MAXCAPACITY
parameter. (SESSION: 106764)
Hi,
I have a problem with a scheduled command. The TSM server is 5.3.1.4 on AIX 5.3
ML2,
the affected client is 5.2.2.0 on Red Hat Linux Advanced Server 2.1 (i386).
SCHEDmode is PROMPTed, the client has MANAGEDSERVICES WEBCLIENT SCHEDULE
and dsmcad is runnning.
There are two schedules defined fo
I would suspect IC44976, since Todd noted that TOR would work for a day
or two before entering the Twilight Zone. I have also been bitten by
the expired admin pwd bug, but that stopped TOR cold in my case, so I
didn't think it fit this particular problem.
-steve
-Original Message-
From: A
Hi All,
I have a customer who is testing the upgrade of his Exchange servers
from W2K3 to W2K3 SP1 but he is having issues post the upgrade.
Is there an unspoken requirement to shut down the TSM services when
performing OS upgrades?
Any advice appreciated - without a test machine it's hard to te
Only use search=yes if the tapes are allready in the library
search=bulk searches the bulk-i/o
Regards,
Maurice
- Original Message -
From: "Scott, Mark William" <[EMAIL PROTECTED]>
To:
Sent: Thursday, September 15, 2005 6:19 AM
Subject: Re: [ADSM-L] 3583 library
Hi Andrew
We
48 matches
Mail list logo
