Joon,
Tapes with FF00, it means they cannot check in as scratch, because the tapes
have un-expired data. That's why TSM is smart enough won't check in as
scratch, but they can check in as private.
Tapes can be check in again as scratch after all data are expired.
Ming Lau
System Administrator,
Ofer,
A couple of issues here.
First, and probably this is your answer, the 70GB capacity for DLT IV
cartridges on DLT7000 drives is an estimate assuming 2:1 compression. The
compression is done using a version of the Lempel-Ziv algorithm, like that
used by PKZIP and many other software compres
>ANS9281E Space management kernel extension is downlevel from the user program.
>
>Since we don't use space management here, as far as I know...
Tony - You may not use it, but I'll bet the last time the client was installed
on that system, all components were installed, including HSM. Fro
>07/11/2001 12:50:41 ANR8301E I/O error on library FFATL04 (OP=045C6D37,
> SENSE=N/A, CC=0023).
Rob - From my notes at http://people.bu.edu/rbs/ADSM.QuickFacts :
ANR8301E I/O error on library __ (OP=005C6D37, SENSE=N/A, CC=0023).
CC is the I/O complet
Hi,
In 3494 tape library I've found dozens of 3590 tapes in insert(FF00) mode. I
tried checkin command with search=yes, status=scratch, devtype=3590 but it
didn't bring tapes into scratch mode. Instead, running checkin every single
volumes without specifying search option did work.
Now my questio
ANS9281E Space management kernel extension is downlevel from the user program.
Since we don't use space management here, as far as I know, this warning is not
a big deal, and it doesn't seem to affect the regular backup that occurs earlier
in the morning. However, we really don't want this messa
try the 8.3 format for the file path
c:\progra~1\...
Rajesh Oak
--
On Wed, 11 Jul 2001 14:18:10
Cook, Dwight E wrote:
>should be able to specify
>cmd /c blah
>like
>cmd /c "C:\Program Files\BMC Software\obacktrack\bin\myscript"
>the /c says to carry out the command (which follows) then
Hi
Can anybody explain about this problem.
A PROBLEM WAS DETECTED ON Wed Jul 11 16:03:36 EDT 2001801014
The Service Request Number(s)/Probable Cause(s)
(causes are listed in descending order of probability):
899-000: Medium error reported in sense data
rmt0
I am running TSM 4.1.3 server on a Win2000 machine. That machine is
connected to an IBM3494
tape library over ethernet. The 3494 contains three fibre attached 3590E1A drives
that talk to the TSM
server over an IBM 6109 SAN switch. I have added thirty tapes to the ATL that are the
new "J" tape
Richard,
That's exactly what I thought. The upside is we are only archiving one
directory D:\BACKUPS\ARCHIVE\* for this particular node so omitting the
-des field would likely solve my problem.
Thanks for the information.
- Brian
"Richard
Sims"
> I found a problem today with TSM and Archives. We are running a TSM 3.7.4
>server on OS/390 2.10 and I had a client indicate that they could not find
>an Archive from 2 weeks ago. I accessed the client via the web and selected
>the retrieve function from the GUI. Sure enough there was only one a
This is useful information. Thank you so much.
--- bbullock <[EMAIL PROTECTED]> wrote:
> I've seen all the replies and they are all
> good, but I don't think
> they will solve your problem. I think the most
> telling problem is that when
> you run backups individually, they work great, b
should be able to specify
cmd /c blah
like
cmd /c "C:\Program Files\BMC Software\obacktrack\bin\myscript"
the /c says to carry out the command (which follows) then terminate and
return...
Dwight
-Original Message-
From: Phillip Guan [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, Jul
Hello everyone.
I found a problem today with TSM and Archives. We are running a TSM 3.7.4
server on OS/390 2.10 and I had a client indicate that they could not find
an Archive from 2 weeks ago. I accessed the client via the web and selected
the retrieve function from the GUI. Sure enough there w
Hi Dwight and David,
Yes, the script is a .bat file and has some environment and "cd" command
in it. How do I check/set to use command.com or cmd.exe in W2K services?
Thanks,
Phillip
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]] On Behalf Of
Cook, Dwight E
S
ALSO, forgot this a second ago...
REMEMBER
C:\WINNT\system32\command.com doesn't allow for spaces
C:\WINNT\system32\cmd.exe does allow spaces (when enclosed in double
quotes)
double check under which environment you are running
Dwight
-Original Message-
From: David Longo [mailto:[
Try putting that path in the default path for that win2000 box...
-Original Message-
From: Phillip Guan [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 11, 2001 12:53 PM
To: [EMAIL PROTECTED]
Subject: Script does not run - Full path name has space?
Hi,
We have setup a scheduler to bac
Check your password.
I've seen similar errors when starting the scheduler service with
the wrong password.
On Wednesday, July 11, 2001 10:08 AM, Angelica Tulipano [SMTP:[EMAIL PROTECTED]]
wrote:
> I'm having this problem in a tsm client, someone of you know what can it
> be?
>
> ANR0444W Protocol
You probably need to setup some environment variables in script or need to "CD" to a
directory in the script before executing commands.
I guess this is a .BAT file?
David Longo
>>> [EMAIL PROTECTED] 07/11/01 01:53PM >>>
Hi,
We have setup a scheduler to backup the database data. But the script
Hi,
We have setup a scheduler to backup the database data. But the script
works if I put it in the root directory, i.e, c:\; but it doesn't work
if I put in C:\Program Files\BMC Software\obacktrack\bin directory. Does
anyone experience this problem?
Thanks in advance for your help!
TSM client:
What is the verb name? Also what is the size of the tsm client?
> -Original Message-
> From: Angelica Tulipano [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, July 11, 2001 1:08 PM
> To: [EMAIL PROTECTED]
> Subject: Re: TSM 3.7 CLIENT problem ANR0444W (out of sequence verb)
>=20
> I'm h
PL check ur client platform from server side it should be win nt.
pl use Netscape browser to this its easy.
balanand pinni
-Original Message-
From: Angelica Tulipano [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 11, 2001 12:08 PM
To: [EMAIL PROTECTED]
Subject: Re: TSM 3.7 CLIENT proble
I'm having this problem in a tsm client, someone of you know what can it
be?
ANR0444W Protocol error on session session number for node client node
name (client platform) - out-of-sequence verb (type verb
name)
received.
Thanks
Angélica Tulipano
Phone (507) 263-
Verify that you have the latest build of the following NML's: TSA410.NLM,
TSANDS.NLM, and SMDR.NLM.
Tony Jules
ITS / Olympus America Inc.
631-844-5887
[EMAIL PROTECTED]
Marc Levitan
cc:
Sent by: Subject:
The updated nlms help a lot on 5.x boxes, don't know if there are similar ones
out there for 4.1
What patch of 3.7.2, seems like I've had luck with rev 12 or 4.1.1_18.
"David Browne." wrote:
> I have an intermittent problem with scheduled backups on my NetWare 4.11
> severs running TSM 3.7.2.
Hanna Hahne,
Yes, 2.1.10 does support 8.1.7. Oracle 8.1.7 was release before TDP for
Oracle V2.2 was released. We claimed support then, this information might
have been discarded when the web pages were updated for V2.2.
Regards,
Neil G. Rasmussen
TDP for Oracle
E-mail: [EMAIL PROTECTED]
You're not alone! Unfortunately, I have not had any luck...
I tend to think it has to do with network communications???
"David
Browne." To: [EMAIL PROTECTED]
Subject: TSM 3.7.2 problem on Novell 4.1
Huh!
I would have sworn I had tried audit vol earlier, but obviously not, because
it worked.
Thanks!
- Kai.
>Date:Mon, 9 Jul 2001 14:47:35 -0600
>From:Kai Hintze <[EMAIL PROTECTED]>
>Subject: Can't reclaim volume using 0 bytes
>
>I have a volume that apparently has 0 bytes used that I
>...I deleted the tapes that should hold theses ACTIVE files with
>DISCARD=YES. I would believe it would take it off the data base. ...
Matt - Deleting a Primary storage pool volume certainly results in the
files that were on the volume being deleted from the TSM database.
Filespace name
All you would have to do is change the library configuration to manual in
the device configuration file before the restore is done. Then when ever
you do the Database restore, you will have to specify the volumes that
contain the database backup. Then when you are up and running, the server
will
Or you could run an sql on the occupancy table for just your tape storage pool.
>>> "Cook, Dwight E" <[EMAIL PROTECTED]> 07/11/01 11:17AM >>>
Try
select volume_name,cast((pct_utilized * est_capacity_mb / 100) as
decimal ) as "MB on Tape" from adsm.volumes where devclass_name='3590DEVC'
o
Hi,
We have a 3494 tape library with 4 3590 tape drives and a robot. We are
considering an offsite disaster recovery solution. Meaning if the present
building is destroyed we go to another location and restore everything.
However at this "other location" we donot have 3494 tape library. We woul
I do run Expire Inventory daily. I did ntice that if it does not finish, in
the 3 hour window that I give it, that it starts where it left off the next
day. But it does NOT look at the nodes at the beginning of the list again,
that day. Kind of odd but that is what it does.
You are correct in
Try
select volume_name,cast((pct_utilized * est_capacity_mb / 100) as
decimal ) as "MB on Tape" from adsm.volumes where devclass_name='3590DEVC'
or
select cast(sum(pct_utilized * est_capacity_mb / 100) as decimal )
as "MB on Tape" from adsm.volumes where devclass_name='3590DEVC'
>Thus I need to asume from my select results, that the real size of the
>backups in the library is taken from the occupancy table?
Hi, Ofer - Yes, the Occupancy statistics reflect the real utilization
of your storage pools.
Also consider doing Audit Licence followed by Query Auditoccup
I have an intermittent problem with scheduled backups on my NetWare 4.11
severs running TSM 3.7.2. My scheduled backup session seems to complete
successful but the dsmc session does not quit. The next days scheduled
backup will not start. My Network people have attempted a ctrl C to get out
of
Hi Richard.
First, thanks for the quick answer :-),
Thus I need to asume from my select results, that the real size of the
backups in the library is taken from the occupancy table?
which is a reasonable number 2.5TB, and if its the only way to know what is the real
size of
my library?
regards
You have been running "expire inventory" haven't you? This is a routine process,
ideally run daily that actually deletes info from DB.
David Longo
>>> [EMAIL PROTECTED] 07/11/01 10:22AM >>>
Hello all,
I am in the process of finding out why some of the DATA on my tapes
are not expiring
>...I did a
>SELECT * from backups where backup_date < '2001-04-02' . The results
>should have shown data that was backed up on
>2001-04-01. BUT THERE IS A LOT OF DATA THAT WAS BACKED UP ALL THE WAY BACK
>TO 2000-12-xx.
>What is going on here? Why is the data there? Shouldn't it have been
>ex
Hello all,
I am in the process of finding out why some of the DATA on my tapes
are not expiring. I have been learning a lot doing this but it is time
consuming (surprised right?). Anyway to just correct some past injustices I
deleted most of the tapes that I know should not hold valid DA
I've seen all the replies and they are all good, but I don't think
they will solve your problem. I think the most telling problem is that when
you run backups individually, they work great, but when you have multiple
sessions and processes running at the same time, they all seem to bog dow
Hi
Apart from all suggestions I would look at memory leaks.
balanand
-Original Message-
From: Chuck Lam [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 10, 2001 6:47 PM
To: [EMAIL PROTECTED]
Subject: TSM server performance help
Server: M80 running AIX 4.3.3, 4GB RAM, 768MB ps
I think you have to register space management licenses:
REGISTER LICENSEFILE=SPACEMGR.LIC NUMBER=10
Clients need both.
Regards,
Jan Berger Henriksen
Principal Engineer
Dept. of InformaticsE-mail: [EMAIL PROTECTED]
University of BergenPh: 47 - 5558 41
Does anyone have a script that reports the amount of space used on tapes?
instead of using "q Filespace"
Ken C. Brown
International Truck and Engine Corporation
NGV Server Team
(937) 342-7561
[EMAIL PROTECTED]
What is the state of the sessions most of the time?
Jeff Bach
Home Office Open Systems Engineering
Wal-Mart Stores, Inc.
WAL-MART CONFIDENTIAL
-Original Message-
From: Robert Clark [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, July 10, 2001 11:18 PM
To:
> 'select node_name,sum(file_size) as sum_file_size from contents group
> by node_name'
>
> 'select node_name,sum(PHYSICAL_MB) as sum_phys_mb from occupancy group
> by node_name'
>
> and I got the following result
>
> 9,030,520 MB from the contents table
>
> 2,422,690 MB from the occupancy table
>The time on a Windows NT is set correct. The timezone is set correct. At the DOS
>prompt we got the correct time. The NT clock shows the correct time. Timformat
>is set to 1.
>Dateformat is set to 2. Language is set to AMENG. The OS is installed in
>English. But the clock on TSM is 1 hour wron
Hi all,
I have a 100 DLT cartridges library with 35/70GB capacity each.
This is like 7TB approximately data on the library if the compression
utilization is like 100%( which is not the case).
In addition, there are like 37 cartridges with scratch status.
I would like to know how much dat
Hi Steve!
Check the sbtio.log for more details.
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines
-Original Message-
From: Steve de Souza [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 11, 2001 10:38
To: [EMAIL PROTECTED]
Subject: rman and adsm 3.1.2
Hi all,
we are try
Hi William!
I wasn't talking about all 4.2 manuals, just the TDS 4.2 manuals.
I found them on the cd eventually. The were named release notes, which is
not a name I would expect.
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines
-Original Message-
From: William White [mailto:[EMAIL
hello all,
Yesterday I upgraded a ADSM 3.1.2 server to TSM 4.1.0 which is running on a
Sun Solaris OS.
After installing the license package, I issued a REGISTER LICENSE
FILE=MGSYSLAN.LIC NUMBER=10.
(ok, i did it three times, i was not aware that it would add and not set the
number).
now, when i d
Louis Wiesemann <[EMAIL PROTECTED]> schrieb:
> Thanks. One thing I'm not clear on is whether I need to set the old B tapes
to readonly or can I let TSM do it for me. IBM says that the new drives will
not write over a non-scratch tape in the old format. When TSM calls for an
output tape and the
HI All
The time on a Windows NT is set correct. The timezone is set correct. At the DOS
prompt we got the correct time. The NT clock shows the correct time. Timformat
is set to 1.
Dateformat is set to 2. Language is set to AMENG. The OS is installed in
English. But the clock on TSM is 1 hour wr
Hi all,
we are trying to get rman and adsm to play nicely but are getting
this strange error.
Anyone seen this before?
it looks as tho this message is happening just when adsm is trying
to write to tape.
Any help/ideas would be great
cheers
Somebody on the list wrote that V4.2 manuals are not available for download.
I saw several at this URL.
http://www.tivoli.com/support/public/Prodman/public_manuals/storage_mgr/admanual.htm#tarcom
Regards,
www.
___
William White
Mainframe Services Group
Interna
55 matches
Mail list logo
