>07/11/2001 12:50:41 ANR8301E I/O error on library FFATL04 (OP=045C6D37,
> SENSE=N/A, CC=00000023).
Rob - From my notes at http://people.bu.edu/rbs/ADSM.QuickFacts :
ANR8301E I/O error on library ______ (OP=005C6D37, SENSE=N/A, CC=00000023).
CC is the I/O completion code (some of which are documented in Appendix
B of the Messages manual), where 23 indicates that the device does not
exist in the library.
Seen when the mtlib status command shows a drive as "Device available to
Library.", but ADSM finds itself unable to actually use the drive (an
ADSM server 'SHOW LIBR' has it avail=0). Attempted mtlib will show:
mtlib -l /dev/lmcp0 -m -f /dev/rmt3 -V 000081
Mount operation Error - Device is not in library.
Look at the 3590 control panel: make sure that the drive is functional,
and that the appropriate Path is Online.
There was a defect in 3.1.x and 3.7.x Server code, affecting drives in a
3494 library, where an UPDate DRive command without a DEVIce
specification can cause the device number to be lost to the server.
(See APAR IC27477)
Perhaps this is what's plaguing you. Richard Sims, BU
