I used AutoVault to recover a customer's AIX TSM server at Sungard. It
worked well and made the process significantly smoother.
Ted Byrne
>Thanks to all for the feedback regarding tape vaulting.
>I decided to try Code Relief's AutoVault product.
>For a newbie to TSM, I found the trial down
Just an FYIThe hostname 'changed' on us when we went from AIX
4.2 to 4.3.
We had to update the LM with the 'long' name hostname.coname.pvt
(instead of just the host name...)...
pressing for answers, but haven't got them yet...
the hostname in the ibmatl.con
I'm also one of the people who always hard sets both ends to 100 full on
servers. In my experience with auto-negotiate, things look fine and dandy
when looked at quickly, i.e. link lights at 100 and FD and data passing
fine, but problems seem to occur under heavy load. I noticed slight
throughpu
You can try specifying a header for your columns that contains imbedded
blanks. For example (something a little simpler, but it illustrates what I
am saying):
select date_time as "Date and Time ",
message as "Message < 90 blanks >"
from actlog where date(da
Checked the TSM V4.1 CD readme.srvand nothing that I could find indicates
that you'll have to re-register licenses.
I dug in 'books' and found a step (quickstart book) (under:Migrating to Tivoli
Storage Manager Version 4.1
You can install Tivoli Storage Manager Version 4.1 over a previous vers
>As it says in the README
>>This is a smit/installp installable PTF that will install as
>>level 4.1.1.0. You must have the base level (4.1.0.0) installed
>>otherwise this PTF will fail to install.
>
>I wouldn't be surprised if you need to pay for the baselevel CD.
This is a good point. I did
I am on 3.7.3.6 for os/390 and it is not fixed. Examined and
affected are the same. I opened a pmr about this and sent doc
but I haven't heard anything from ibm in over a month.
--
--
Bill Colwell
C. S. Draper Lab
Cambridge, Ma.
[EMAIL PROTECTED]
---
I've heard that this problem manifests itself mostly with 3com cards(thats what we use
in our compaqs) and we make sure we specify 100/full when defining the card. then
there is no way it can utilize anything else. If your entire network is 100 mb stay
away from aut-negotiate with the 3com car
This should be fully documented in the README file.
The 4.1 server has a different licensing scheme than the 3.7 version of the
server.
The 3.7 licenses are not recognized by 4.1. You need to do the REGISTER LICENSE
commands on the 4.1 server.
The current architecture of the license manager is a
All, or most all, of the lic files have changed from 3.7 to 4.1.
Licensing is a whole new ball game in 4.1.
--
Joshua S. Bassi
Senior Technical Consultant
Symatrix Technology, Inc.
[EMAIL PROTECTED]
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Dave,
The only real formatted output option that I have found that
helps any is a macro command.
create the file
mymacrofile.macro (example)
(contents)
set sqldisplaymode wide
commit
[mycommandhere]
commit
dsmadmc -id=yourid -password=yourpasswd macro "/path/mymacrofile.macro"
Hope this helps
As it says in the README
>This is a smit/installp installable PTF that will install as
>level 4.1.1.0. You must have the base level (4.1.0.0) installed
>otherwise this PTF will fail to install.
I wouldn't be surprised if you need to pay for the baselevel CD.
At 09:33 PM 9/14/2000 -0500, you
Thanks to all for the feedback regarding tape vaulting. I decided to
try Code Relief's AutoVault product. For a newbie to TSM, I found the
trial
download version easy to install and configure. So far, it has been
working well and I like the price much better.
I am curious if anyone has tried u
Not suprising (argh!).any info in the README files? (it wouldn't suprise me
if there weren't)...
When I get to it AND if I see the same symptoms when I upgrade to 4.1 AND if
there's no info in any readmeI'll open yet another etr/pmr...
Anyway...hopefully you have your *.lic files (we
Thanks, Trevor. Now I've had to explain to management why I'm trapped in a
number of the proverbial hard places: I've run with a patch before, and the
attendant problems were worse than the fix, but if I can't exclude files or
filesystems on a DB machine, I can't run a backup. I've got the same
For Client Monitoring and Reporting, I am going to
generate reports against the system summary table. ie:
select * from summary
However, when I compare the table data to the
backup statistics in the activity log, the examined,
affected, failed, and successful fields do not match.
I am curr
Thanks ,
"[EMAIL PROTECTED]/P=Internet/A= /C=us" on 09/14/2000 03:22:05 PM
Please respond to "[EMAIL PROTECTED]/P=Internet/A= /C=us" @ X400
To: "[EMAIL PROTECTED]/P=Internet/A= /C=us"@X400
cc:
Subject: Re: DISKETTE
Most likely it is a tar. You can use:
tar -tvf /dev/fd0 :to view
Most likely it is a tar. You can use:
tar -tvf /dev/fd0 :to view it
tar -xvf /dev/fd0 /dest/path :to extract it
Your system may refer to the floppy as something
other than fd0.
Roger C Cook
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Beh
Hi all,
real quick question ,
every day DRM module creates a diskete containing volhist , dev conf, and ...
i dont know exactlly what does it contains .
neither chapter 21 tells you what does it contains .(Admin Guide for AIX0
i tried to read that files , but i could not , i tried from DOS - sy
I have seen numerous problems with auto-negotiate myself. Usually it's a
problem between the NIC and the switch port. I've found a simple test is to
FTP some fairly good sized files back and forth to see what kind of
throughput you get. In one particular case I went to en environment where
TSM bac
Server: H50, AIX 4.2.1, ADSM 3.1.1.5 (yeah, I know,we 're working on the
upgrade)
Client: NT Server 4.0SP5, ADSM 3.1.0.6 (or .7)
We're doing our-world testing for performance of restores, which is currently
estimated to be unnacceptable (i.e. 2 weeks to bare-metal restore an NT campus
server with
My manager came to me today with an interesting problem: It appears that
the event logs that are sent to him at 8am, and again at 5pm, differ in that
the second lacks some events reported on the earlier server.
As far as I can tell, this may be because I made a change to the schedule in
question
Formatting SQL select statement output
How do I change the output of the column width in a select statement?
Below is a select statement I am currently working on and would like to
expand the message column to something wider than the default 18 chr.
Dave T
ADSM Version 3
Release 1
I have 200+ Compaq servers.
One set is remote, and they are set to 100/Full. Insight Mgr doesn't lie.
The other set is set to Auto. And this works fine.
The only time we've ever had a problem is when the port in the 3Com switch
is not matched to the NIC.
If we have Compaq NIC Auto ---> 3Com Switc
Over time I've seen posts on this listserv about not using
auto-negotiate for network interface cards and hard coding the
line speed like 100mbit full duplex. They use auto-negotiate on
all of our Compaq Windows NT servers here and can't help but
wonder, based on posts on this listserv, whet
Gartner has a comparison of all the storage products,
but it wants $95US for it.(Well worth it,IMHO).
Edward(Ed) J. Finnell, III
Enterprise Systems/Proj. Mgr.
url:www.ua.edu
Found the problem, the cable we were using for the tty connection to the
3494 apparently was not a null modem cable, and so I added a null modem
adapter and all is well.
Thanks, especially to Richard ([EMAIL PROTECTED]) .
-Tom
>>> <[EMAIL PROTECTED]> 09/13/00 01:00PM >>>
>The port is available,
Please Help
I just upgraded my TSM Server 3.7.3 to 4.1.1 from the TSM FTP site. All went well
except for the license information. License information shows that I do not have any
valid licenses. Server Utilities shows that my licenses are 3.7.3.
What do I need to do so that I can get this
Did you make sure your download was binary?
MV
-Original Message-
From: Loon, E.J. van - SPLXM [SMTP:[EMAIL PROTECTED]]
Sent: Thursday, September 14, 2000 4:51 AM
To: [EMAIL PROTECTED]
Subject:New TSM 4.1 client download
Hi
To all:
Environment:AIX 4.3.3
TSM server 3.7.3
Oracle TDP 3.7.1
Oracle 8.1.5/6
TSM client V3.7.2 on AIX 4.3.3
We've been trying to get some historical data (if any is available) for the
impact an Oracle repository will have on T
Walt,
I won't get into details on performance tuning on this list
but I will tell you what some of our customers have seen.
We all know that performance tuning really is rocket science...
...and requires expert analysis. :-)
We have customers consistently achieving rates greater than
30G per ho
Eric,
I just downloaded the client 4.1.1 code and installed it this morning and
everything ran OK.. Try it again?
regards, Lou
-
Lou D. Heavenrich; Tivoli Data Protection Team
Global Application Delivery - North, IBM Global Services
what if you marked a volume as detroyed? I mean if there are active files on
the volume, will the inventory expiration update the database so those
were-active files get picked up during the next backup?
Jie
> -Original Message-
> From: Thomas Denier [SMTP:[EMAIL PROTECTED]]
> Sent: Wed
Hi *SM-ers!
My problem is solved! I downloaded the files with another (non-Microsoft)
FTP client and now it works! The filesize is exactly the same, so I still
don't know the cause, but never mind.
Kindest regards,
Eric van Loon
-Original Message-
From: Loon, E.J. van - SPLXM [mailto:[EMA
I had written to this group the other day about a problem that I was
having with backing up the registry through the services but could
successfully complete the backup manually. I would like to thank everyone
that responded so quickly, you all gave me some great ideas for
investigating. I was
same problem i have faced , 3 days ago, i was trying to copy some fils from one
node to another node ,
and options i was trying was fromnode and virtual node. after addng entry as
virtual node , the
web client wont ask password also. (infact that login screen does not appear )
. even i am waiting
Hi Mark,
Sorry I'm just replying but I have been out of the office. I know that
there are some issues with TSM 3.7 and Netware specifically backing up the
NDS tree. When backing up the NDS tree memory is used but not released
until the backup completes. If you do not have enough memory on the se
>Can I solve this problem without having to write my own utility in C and
>the API?
>
>Can Tivoli backup up the 'contents' of a named pipe?
>
>Is there any way I can use 'dsmc' to back up standard input?
Performing a backup on a named pipe simply records information about the pipe
so that it can
Hi, if you use 3.7 then the SUMMARY table contains the IP address as well as
the node name.
Paul.
>From: "Taylor, Damon M" <[EMAIL PROTECTED]>
>Reply-To: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Re: How does ADSM Map nodenames to IP's?
>Date: Wed, 13 Sep 200
Eric,
I have some information for you from one of my old friends.
ROC software now owns MPE RoadRunner; but had to change the name back to
BackPack.
You can call ROC at 512 249 9294. Ramona Sublett (Ramona used to work for
Unison Software and Tivoli Systems) now works there. You can reach her vi
Hi *SM-ers!
I have downloaded the new TSM 4.1.1 Windows client. When I execute the exe
archive it issues the error: "The contents of this file cannot be unpacked.
The executable you are attempting to run had been corrupted. Please obtain
another copy of the file, verify its integrity, and try agai
Hi, this is based totally on my assumptions of how the stuff is stored in
TSM. It could be all BS.
You can look at the TSM tables(trees) with the SHOW NODE command. Use SHOW
OBJD to get the page numbers for the "Nodes" object and the
"Schedule.Node.Addresses". Use SHOW NODE and the number for "Nod
We've just started using TSM within our organisation - TSM 3.7 on Solaris
2.6.
Using default values for our Solaris clients we can run 'dsmcad' on each
machine and successfully use the web client for each node.
However, we'd like to use the web client also for *virtual* nodes. How can
we do t
Hi. We've just started using TSM - version 3.7 on Solaris 2.6.
We have a legacy application which runs under an implementation of Pick
on top of Solaris. Currently it's backed up to a tape drive but of late
the size of the backup has exceeded the capacity of the tape.
I gather that the backup
44 matches
Mail list logo