[Bug 373889] Re: can no longer send files from nokia phones to PC via bluetooth
You can add Nokia 6120 classic to the list. I have the same problem in Hardy as well, though I'm not sure whether it's because of the phone model or because I haven't set bluetooth up correctly. -- can no longer send files from nokia phones to PC via bluetooth https://bugs.launchpad.net/bugs/373889 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 373889] Re: can no longer send files from nokia phones to PC via bluetooth
Thanks Ben The relevant line from lsusb is: Bus 002 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) which is the same as the OP has. Incidentally, if anyone can tell me what I need to get it working in Hardy, I'd be grateful. I'm ok about applying patches and recompiling if that's what it takes. Irihapeti -- can no longer send files from nokia phones to PC via bluetooth https://bugs.launchpad.net/bugs/373889 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 373889] Re: can no longer send files from nokia phones to PC via bluetooth
philipp: Mine is already set up that way, and I still can't send files from the phone to the computer. The phone takes about half a second to decide that it can't do it. Ben: Thanks. I'd already discovered that I can browse the phone via bluetooth. Unfortunately, I can't copy files to it using Nautilus (but I can copy *from* the phone with Nautilus). If I use the usb cable, I can copy both ways, but only to the add-on memory card, not the phone's "C drive". Irihapeti -- can no longer send files from nokia phones to PC via bluetooth https://bugs.launchpad.net/bugs/373889 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 409559] Re: version 1.6.0_15 is available
The repository version of Firefox gets upgraded each time Mozilla puts out a new one, even on older versions such as Hardy. I think that the same thing should happen with Java. There has already been one update to Java in Hardy, from 1.6.07 to 1.6.14, so it's not impossible. -- version 1.6.0_15 is available https://bugs.launchpad.net/bugs/409559 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 373889] Re: can no longer send files from nokia phones to PC via bluetooth
I now boot into NimbleX 2008 liveCD when I want to transfer files from my phone. It has a fully functioning bluetooth OOTB. Same kernel version as Hardy, I believe. I wonder what they've done differently from Ubuntu to get this to work. -- can no longer send files from nokia phones to PC via bluetooth https://bugs.launchpad.net/bugs/373889 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
Live CD image of 20100419.1 needs "i915.modeset=0 xforcevesa" added to the boot command line, or it just locks up, presumably when trying to start the x server. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] Re: ubiquity crashed with InstallStepError in configure_hardware()
Architecture: i386 DistroRelease: Ubuntu 10.04 LiveMediaBuild: Ubuntu 10.04 "Lucid Lynx" - Release Candidate i386 (20100419.1) Package: ubiquity 2.2.20 [modified: bin/hw-detect] PackageArchitecture: i386 ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 Tags: lucid Uname: Linux 2.6.32-21-generic i686 UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare ** Tags added: apport-collected -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] Casper.gz
apport information ** Attachment added: "Casper.gz" http://launchpadlibrarian.net/44950202/Casper.gz -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] Dependencies.txt
apport information ** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/44950203/Dependencies.txt -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] UbiquityDebug.gz
apport information ** Attachment added: "UbiquityDebug.gz" http://launchpadlibrarian.net/44950204/UbiquityDebug.gz -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] UbiquityPartman.gz
apport information ** Attachment added: "UbiquityPartman.gz" http://launchpadlibrarian.net/44950206/UbiquityPartman.gz -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] UbiquitySyslog.gz
apport information ** Attachment added: "UbiquitySyslog.gz" http://launchpadlibrarian.net/44950208/UbiquitySyslog.gz -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] Re: ubiquity crashed with InstallStepError in configure_hardware()
@Evan Dandrea Logs as requested -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] apport information
Architecture: i386 DistroRelease: Ubuntu 10.04 LiveMediaBuild: Ubuntu 10.04 "Lucid Lynx" - Release Candidate i386 (20100419.1) Package: ubiquity 2.2.20 [modified: bin/hw-detect] PackageArchitecture: i386 ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 Tags: lucid Uname: Linux 2.6.32-21-generic i686 UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] Casper.gz
apport information ** Attachment added: "Casper.gz" http://launchpadlibrarian.net/44982942/Casper.gz -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] Dependencies.txt
apport information ** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/44982946/Dependencies.txt -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] UbiquityDebug.gz
apport information ** Attachment added: "UbiquityDebug.gz" http://launchpadlibrarian.net/44982947/UbiquityDebug.gz -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] UbiquityPartman.gz
apport information ** Attachment added: "UbiquityPartman.gz" http://launchpadlibrarian.net/44982948/UbiquityPartman.gz -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] UbiquitySyslog.gz
apport information ** Attachment added: "UbiquitySyslog.gz" http://launchpadlibrarian.net/44982966/UbiquitySyslog.gz -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] Re: ubiquity crashed with InstallStepError in configure_hardware()
Here is the info from "ubiquity -d" in terminal. I enabled "set -x" in /bin/hw-detect as previously. I wasn't quite sure whether to do that or not. -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 568127] [NEW] xserver crashes on EeePC 900 - Lucid
Public bug reported: Binary package hint: xorg X runs for a short while (some minutes, sometimes longer, then crashes to a blank screen. Pressing an arrow key reveals a command-line screen. Attempting to run 'startx' gets a message that x is still running. Rebooting is the only remedy. This is a minimal install with Openbox and xdm. Earlier in the development cycle, it was very solid. Recently (a few weeks) it's been exiting X unexpectedly. No particular pattern is apparent. I installed the xserver version from ppa:ubuntu-x-swat/x-updates, which is currently running, and it's made no difference. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: xserver-xorg 1:7.5+5ubuntu1 ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-21-generic i686 Architecture: i386 Date: Thu Apr 22 10:15:29 2010 DkmsStatus: Error: [Errno 2] No such file or directory GdmLog: Error: command ['sudo', 'cat', '/var/log/gdm/:0.log'] failed with exit code 1: cat: /var/log/gdm/:0.log: No such file or directory GdmLog1: Error: command ['sudo', 'cat', '/var/log/gdm/:0.log.1'] failed with exit code 1: cat: /var/log/gdm/:0.log.1: No such file or directory GdmLog2: Error: command ['sudo', 'cat', '/var/log/gdm/:0.log.2'] failed with exit code 1: cat: /var/log/gdm/:0.log.2: No such file or directory MachineType: ASUSTeK Computer INC. 900 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=8a839476-cd55-4abb-91be-9d0929a9da94 ro quiet ProcEnviron: PATH=(custom, no user) LANG=en_NZ.UTF-8 SHELL=/bin/bash SourcePackage: xorg dmi.bios.date: 05/12/2008 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0501 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: 900 dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: x.xx dmi.chassis.asset.tag: 0x dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTek Computer INC. dmi.chassis.version: x.x dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0501:bd05/12/2008:svnASUSTeKComputerINC.:pn900:pvr0405:rvnASUSTeKComputerINC.:rn900:rvrx.xx:cvnASUSTekComputerINC.:ct10:cvrx.x: dmi.product.name: 900 dmi.product.version: 0405 dmi.sys.vendor: ASUSTeK Computer INC. system: distro: Ubuntu codename: lucid architecture: i686 kernel: 2.6.32-21-generic ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 lucid -- xserver crashes on EeePC 900 - Lucid https://bugs.launchpad.net/bugs/568127 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 568127] Re: xserver crashes on EeePC 900 - Lucid
** Attachment added: "BootDmesg.txt" http://launchpadlibrarian.net/44987555/BootDmesg.txt ** Attachment added: "CurrentDmesg.txt" http://launchpadlibrarian.net/44987556/CurrentDmesg.txt ** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/44987557/Dependencies.txt ** Attachment added: "Lspci.txt" http://launchpadlibrarian.net/44987558/Lspci.txt ** Attachment added: "Lsusb.txt" http://launchpadlibrarian.net/44987559/Lsusb.txt ** Attachment added: "PciDisplay.txt" http://launchpadlibrarian.net/44987560/PciDisplay.txt ** Attachment added: "ProcCpuinfo.txt" http://launchpadlibrarian.net/44987561/ProcCpuinfo.txt ** Attachment added: "ProcInterrupts.txt" http://launchpadlibrarian.net/44987562/ProcInterrupts.txt ** Attachment added: "ProcModules.txt" http://launchpadlibrarian.net/44987563/ProcModules.txt ** Attachment added: "RelatedPackageVersions.txt" http://launchpadlibrarian.net/44987564/RelatedPackageVersions.txt ** Attachment added: "UdevDb.txt" http://launchpadlibrarian.net/44987565/UdevDb.txt ** Attachment added: "UdevLog.txt" http://launchpadlibrarian.net/44987566/UdevLog.txt ** Attachment added: "XorgLog.txt" http://launchpadlibrarian.net/44987567/XorgLog.txt ** Attachment added: "XorgLogOld.txt" http://launchpadlibrarian.net/44987568/XorgLogOld.txt ** Attachment added: "Xrandr.txt" http://launchpadlibrarian.net/44987569/Xrandr.txt ** Attachment added: "glxinfo.txt" http://launchpadlibrarian.net/44987570/glxinfo.txt ** Attachment added: "setxkbmap.txt" http://launchpadlibrarian.net/44987571/setxkbmap.txt ** Attachment added: "xdpyinfo.txt" http://launchpadlibrarian.net/44987572/xdpyinfo.txt ** Attachment added: "xkbcomp.txt" http://launchpadlibrarian.net/44987573/xkbcomp.txt -- xserver crashes on EeePC 900 - Lucid https://bugs.launchpad.net/bugs/568127 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 499399] Re: unable to install or start as live-cd daily build 22.12.09 Lucid
Still not booting, using daily build of 20100329 -- unable to install or start as live-cd daily build 22.12.09 Lucid https://bugs.launchpad.net/bugs/499399 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
@Geir I installed your libdrm version as mentioned in Bug 447892. Initially, I just added the PPA to my sources.list and updated. That installed a total of four upgraded packages, and my laptop locked up while I was running the repro.sh. Then I downgraded the other three packages to the standard Ubuntu versions, just leaving libdrm as your version. I have run the script a number of times and I can't get the laptop to lock up. I'll keep using it like this for a while and see what happens. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
The upgraded packages were libdrm-intel1, libdrm-nouveau1, libdrm- radeon1, and libdrm2. I removed - downgraded, rather - the first three and kept libdrm2. I figure that -nouveau1 and -radeon1 wouldn't be doing anything on an intel system and that the problem was most likely to be with -intel1. Still no lockups so far. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] Re: ubiquity crashed with InstallStepError in configure_hardware()
Just testing 20100427.1 installation. I decided to emulate what a newcomer might do: namely, try to install by double-clicking on the installer icon, find it doesn't work and then try the --no-migration- assistant option. However, if I do that, migration-assistant is still active and can't be killed. Therefore, the installation still chokes on the "unable to unmount" stage. The only way around it is to reboot. Could that be included in the release notes? -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 570947] [NEW] OS prober chooses /dev/sdX notation when UUIDs requested
Public bug reported:
Binary package hint: os-prober
OS prober insists on identifying one of my installations by /dev/sdXY
notation, even though it's told to use UUIDs.
All the rest of them are correctly identified by UUID.
Here is the grub.cfg file.
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env
recordfail; fi; fi
}
insmod ext2
set root='(hd2,1)'
search --no-floppy --fs-uuid --set d458c1cf-f605-477d-84de-305d54731aee
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd2,1)'
search --no-floppy --fs-uuid --set d458c1cf-f605-477d-84de-305d54731aee
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.34-020634rc5-generic' --class ubuntu --class
gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,1)'
search --no-floppy --fs-uuid --set d458c1cf-f605-477d-84de-305d54731aee
linux /boot/vmlinuz-2.6.34-020634rc5-generic
root=UUID=d458c1cf-f605-477d-84de-305d54731aee ro quiet splash
initrd /boot/initrd.img-2.6.34-020634rc5-generic
}
menuentry 'Ubuntu, with Linux 2.6.34-020634rc5-generic (recovery mode)' --class
ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,1)'
search --no-floppy --fs-uuid --set d458c1cf-f605-477d-84de-305d54731aee
echo'Loading Linux 2.6.34-020634rc5-generic ...'
linux /boot/vmlinuz-2.6.34-020634rc5-generic
root=UUID=d458c1cf-f605-477d-84de-305d54731aee ro single
echo'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.34-020634rc5-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class
gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,1)'
search --no-floppy --fs-uuid --set d458c1cf-f605-477d-84de-305d54731aee
linux /boot/vmlinuz-2.6.32-21-generic
root=UUID=d458c1cf-f605-477d-84de-305d54731aee ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu
--class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,1)'
search --no-floppy --fs-uuid --set d458c1cf-f605-477d-84de-305d54731aee
echo'Loading Linux 2.6.32-21-generic ...'
linux /boot/vmlinuz-2.6.32-21-generic
root=UUID=d458c1cf-f605-477d-84de-305d54731aee ro single
echo'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd2,1)'
search --no-floppy --fs-uuid --set d458c1cf-f605-477d-84de-305d54731aee
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd2,1)'
search --no-floppy --fs-uuid --set d458c1cf-f605-477d-84de-305d54731aee
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Debian GNU/Linux, with Linux 2.6.32-3-686 (on /dev/sda2)" {
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 675f6d2c-0119-4eac-81c8-e8e00fd8598b
linux /boot/vmlinuz-2.6.32-3-686
root=UUID=675f6d2c-0119-4eac-81c8-e8e00fd8598b ro quiet
initrd /boot/initrd.img-2.6.32-3-686
}
menuentry "Debian GNU/Linux, with Linux 2.6.32-3-686 (recovery mode) (on
/dev/sda2)" {
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 675f6d2c-0119-4eac-81c8-e8e00fd8598b
linux /boot/vmlinuz-2.6.32-3-686
root=UUID=675f6d2c-0119-4eac-81c8-e8e00fd8598b r
[Bug 570947] Re: OS prober chooses /dev/sdX notation when UUIDs requested
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/45794629/Dependencies.txt -- OS prober chooses /dev/sdX notation when UUIDs requested https://bugs.launchpad.net/bugs/570947 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 570947] Re: OS prober chooses /dev/sdX notation when UUIDs requested
I've marked the affected entry with <<--*This is the culprit. It's an entry for Ubuntu 8.04.4 at the end of the OS prober entries. The custom entry at the end is a workaround. -- OS prober chooses /dev/sdX notation when UUIDs requested https://bugs.launchpad.net/bugs/570947 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 568127] Re: xserver crashes on EeePC 900 - Lucid
Update to previous message: >From time to time, when using i915.modeset=0 option, I find that the display becomes pixellated. That is, the lettering and objects are still all there, but instead of being solid black, they will display as partly black and partly coloured. Logging out and in again fixes the issue - for a while, anyway. I've been unable to figure out any specific thing that's causing this. -- xserver crashes on EeePC 900 - Lucid https://bugs.launchpad.net/bugs/568127 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 569952] Re: Cannot disconnect Nokia 6120c in USB mode using "safely remove drive"
The same thing happens with kernel version 2.6.34-rc5.
I tried doing "apport-collect" with this kernel running, but Launchpad
complains about a non-standard kernel version.
** Tags added: apport-collected
** Description changed:
I have successfully used "safely remove drive" to disconnect my Nokia
6120c SD card in Karmic. That was a while ago, after first release.
I'm currently running the Lucid RC version with all updates applied.
When I try to "safely remove drive" on this phone, I get the following
error message:
Unable to stop Nokia S60
Error detaching: helper exited with exit code 1: Detaching device /dev/sdh
USB device: /sys/devices/pci:00/:00:10.3/usb5/5-2)
SYNCHRONIZE CACHE: FAILED: No such file or directory
(Continuing despite SYNCHRONIZE CACHE failure.)
STOP UNIT: FAILED: No such file or directory
If I use "eject" on it, it disconnects properly. But to me, and I
suspect many other people, "eject" is associated with optical media.
"safely remove drive" works with an ordinary USB stick. But only if I
click on the drive listing in the side panel, not on the open directory
window.
ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: linux-image-2.6.32-21-generic 2.6.32-21.32
Regression: Yes
Reproducible: Yes
ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
Uname: Linux 2.6.32-21-generic i686
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
Architecture: i386
ArecordDevices:
List of CAPTURE Hardware Devices
card 0: VT82xx [HDA VIA VT82xx], device 0: AD198x Analog [AD198x Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: ja 1449 F pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'VT82xx'/'HDA VIA VT82xx at 0xcfffc000 irq 17'
Mixer name : 'Analog Devices AD1986A'
Components : 'HDA:11d41986,1043818f,00100500'
Controls : 37
Simple ctrls : 21
Date: Mon Apr 26 10:41:24 2010
HibernationDevice: RESUME=UUID=42bcc0fe-a44c-4857-8c17-cf12559bf96d
InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Release Candidate i386
(20100419.1)
IwConfig:
lono wireless extensions.
eth1 no wireless extensions.
MachineType: System manufacturer System Product Name
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic
root=UUID=d458c1cf-f605-477d-84de-305d54731aee ro quiet splash
ProcEnviron:
PATH=(custom, no user)
LANG=en_NZ.utf8
SHELL=/bin/bash
RelatedPackageVersions: linux-firmware 1.34
RfKill:
SourcePackage: linux
dmi.bios.date: 03/25/2008
dmi.bios.vendor: Phoenix Technologies, LTD
dmi.bios.version: ASUS P5VD2-VM ACPI BIOS Revision 1302
dmi.board.name: P5VD2-VM
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: 1.XX
dmi.chassis.asset.tag: 123456789000
dmi.chassis.type: 3
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version:
dmi.modalias:
dmi:bvnPhoenixTechnologies,LTD:bvrASUSP5VD2-VMACPIBIOSRevision1302:bd03/25/2008:svnSystemmanufacturer:pnSystemProductName:pvr:rvnASUSTeKComputerINC.:rnP5VD2-VM:rvr1.XX:cvnChassisManufacture:ct3:cvr:
dmi.product.name: System Product Name
dmi.sys.vendor: System manufacturer
+ ---
+ Architecture: i386
+ DistroRelease: Ubuntu 10.04
+ InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Release Candidate i386
(20100419.1)
+ Package: linux (not installed)
+ ProcEnviron:
+ PATH=(custom, user)
+ LANG=en_NZ.utf8
+ SHELL=/bin/bash
+ Tags: lucid
+ Uname: Linux 2.6.34-020634rc5-generic i686
+ UnreportableReason: The running kernel is not an Ubuntu kernel
+ UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
--
Cannot disconnect Nokia 6120c in USB mode using "safely remove drive"
https://bugs.launchpad.net/bugs/569952
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] Re: ubiquity crashed with InstallStepError in configure_hardware()
I've just done an installation using the final image. I proceeded by double-clicking on the "install Ubuntu" icon and chose the same options as previously. The migration assistant selected no options (maybe it should from my old Hardy install; and I also have a Debian Testing one? However, it's been doing that all along, and as I don't want to migrate anything, I hadn't really paid attention to it - separate issue, anyway). The installation completed successfully - no problems with unmountable partitions. -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 570947] Re: OS prober chooses /dev/sdX notation when UUIDs requested
Bug still present in 10.04 final. -- OS prober chooses /dev/sdX notation when UUIDs requested https://bugs.launchpad.net/bugs/570947 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
The need to use "i915.modeset=0 xforcevesa" still exists in 10.04 final. I hope that there's a note somewhere for people who are likely to encounter this problem. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
Also, I think that C is correct: this is a problem of fairly recent origin. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 562742] Re: r8169 ethernet MAC address changes in 2.6.32 kernel
@Tim: Sorry, the machine is still exhibiting the same behaviour with your kernel. First boot: OK Subsequent reboots, whether into the same kernel or another one, setting the MAC address to 00:00:00:00:BD:D1 Reset by complete power off (at the wall or the back of the PC case). Incidentally, I installed the mainline kernel 2.6.34-rc5 and it handles the MAC address correctly again. I've had plenty of opportunity to test this with all the live CD/install testing of the last 48 hours or so. -- r8169 ethernet MAC address changes in 2.6.32 kernel https://bugs.launchpad.net/bugs/562742 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 562742] Re: r8169 ethernet MAC address changes in 2.6.32 kernel
@TIm The package is labelled "building" and isn't available. I'll get it as soon as I can. Should I also be using the updated firmware from your ppa, or not? -- r8169 ethernet MAC address changes in 2.6.32 kernel https://bugs.launchpad.net/bugs/562742 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 524938] Re: Remove binary "opensync-plugin-syncml" from lucid
@Beniamino It's possible, though probably not recommended, to get the Karmic versions of the packages libsoup-2.2, libsyncml0 and opensync-plugin-syncml and install them manually. That's what I've done. I hope that eventually a later version becomes available through backports or a PPA. I don't have the technical expertise to run a PPA, otherwise I might offer to. I realise that I'm going to have some other problems then, because one of the plugins I'm currently using (sunbird/lightning) has more or less been abandoned. Nothing is ever simple, it seems. :) -- Remove binary "opensync-plugin-syncml" from lucid https://bugs.launchpad.net/bugs/524938 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 572751] [NEW] Upgraded to Lucid.Wine not running previously-installed programs
Public bug reported: Binary package hint: wine I'm running Wine from the PPA. Previously, I was running Wine in Hardy, also from the PPA. I actually did a clean install, not an upgrade, but I am using the same /home partition and thus the same .wine directory. Wine recognises that the programs are there, because they appear in the list if I choose the 'uninstall programs' option, but they don't show in the menu. Nor will they run if I type "wine .exe" in a terminal. ** Affects: wine (Ubuntu) Importance: Undecided Status: New -- Upgraded to Lucid.Wine not running previously-installed programs https://bugs.launchpad.net/bugs/572751 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 572751] Re: Upgraded to Lucid.Wine not running previously-installed programs
winecfg in a terminal brings up the configuration application. I notice that the history is appearing in the "drives" tag i.e. various USB sticks that have been run at different times. There are no error messages in the terminal. If I try to run "wine winword.exe" (MS word 2000), I get the message: wine: cannot find L"C:\\windows\\system32\\WINWORD.EXE" If I make a symlink to WINWORD.EXE in the system32 directory (which is what it looks like it is trying to find) and run the command, then I get: err:module:import_dll Library MSO9.DLL (which is needed by L"C:\\windows\\system32\\WINWORD.EXE") not found err:module:LdrInitializeThunk Main exe initialization for L"C:\\windows\\system32\\WINWORD.EXE" failed, status c135 I originally installed Wine from the standard Hardy repo, not the PPA. I suppose it would have been version 1.0 or close to that. Output of dpkg -s is: $ dpkg -s wine Package: wine Status: install ok installed Priority: extra Section: otherosfs Installed-Size: 64 Maintainer: Ubuntu MOTU Developers Architecture: all Source: wine1.2 Version: 1.1.43-0ubuntu1~lucidppa3 Depends: wine1.2 Description: Microsoft Windows Compatibility Layer (dummy package) This package is to ease upgrades for users of the Wine Team PPA to help them test the latest Wine packages. It can be safely removed. Homepage: http://www.winehq.org/ Original-Maintainer: Scott Ritchie I have only the MS Office 2000 suite installed. Maybe it would be simpler just to reinstall that. -- Upgraded to Lucid.Wine not running previously-installed programs https://bugs.launchpad.net/bugs/572751 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 519935] Re: Confusing "eject disc" error message when burning dvd
I have a couple of Bash scripts that involved DVD handling that I've used successfully in Hardy for well over a year. I've been getting an error message in Lucid, and I wonder if it's connected with this bug. eject: unable to find or open device for: `cdrom' Lucid doesn't use "cdrom" as a device by default. If I change the scripts to "eject /dev/sr0", then they work. There are no references to "cdrom" in the scripts, by the way. Maybe this error is occurring when Brasero tries to eject the disk. Just a thought. -- Confusing "eject disc" error message when burning dvd https://bugs.launchpad.net/bugs/519935 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 569952] [NEW] Cannot disconnect Nokia 6120c in USB mode using "safely remove drive"
Public bug reported: I have successfully used "safely remove drive" to disconnect my Nokia 6120c SD card in Karmic. That was a while ago, after first release. I'm currently running the Lucid RC version with all updates applied. When I try to "safely remove drive" on this phone, I get the following error message: Unable to stop Nokia S60 Error detaching: helper exited with exit code 1: Detaching device /dev/sdh USB device: /sys/devices/pci:00/:00:10.3/usb5/5-2) SYNCHRONIZE CACHE: FAILED: No such file or directory (Continuing despite SYNCHRONIZE CACHE failure.) STOP UNIT: FAILED: No such file or directory If I use "eject" on it, it disconnects properly. But to me, and I suspect many other people, "eject" is associated with optical media. "safely remove drive" works with an ordinary USB stick. But only if I click on the drive listing in the side panel, not on the open directory window. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-21-generic 2.6.32-21.32 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-21-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: VT82xx [HDA VIA VT82xx], device 0: AD198x Analog [AD198x Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ja 1449 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'VT82xx'/'HDA VIA VT82xx at 0xcfffc000 irq 17' Mixer name : 'Analog Devices AD1986A' Components : 'HDA:11d41986,1043818f,00100500' Controls : 37 Simple ctrls : 21 Date: Mon Apr 26 10:41:24 2010 HibernationDevice: RESUME=UUID=42bcc0fe-a44c-4857-8c17-cf12559bf96d InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Release Candidate i386 (20100419.1) IwConfig: lono wireless extensions. eth1 no wireless extensions. MachineType: System manufacturer System Product Name ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=d458c1cf-f605-477d-84de-305d54731aee ro quiet splash ProcEnviron: PATH=(custom, no user) LANG=en_NZ.utf8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34 RfKill: SourcePackage: linux dmi.bios.date: 03/25/2008 dmi.bios.vendor: Phoenix Technologies, LTD dmi.bios.version: ASUS P5VD2-VM ACPI BIOS Revision 1302 dmi.board.name: P5VD2-VM dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: 1.XX dmi.chassis.asset.tag: 123456789000 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvrASUSP5VD2-VMACPIBIOSRevision1302:bd03/25/2008:svnSystemmanufacturer:pnSystemProductName:pvr:rvnASUSTeKComputerINC.:rnP5VD2-VM:rvr1.XX:cvnChassisManufacture:ct3:cvr: dmi.product.name: System Product Name dmi.sys.vendor: System manufacturer ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 lucid needs-upstream-testing regression-potential -- Cannot disconnect Nokia 6120c in USB mode using "safely remove drive" https://bugs.launchpad.net/bugs/569952 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 569952] Re: Cannot disconnect Nokia 6120c in USB mode using "safely remove drive"
** Attachment added: "AlsaDevices.txt" http://launchpadlibrarian.net/45393140/AlsaDevices.txt ** Attachment added: "AplayDevices.txt" http://launchpadlibrarian.net/45393141/AplayDevices.txt ** Attachment added: "BootDmesg.txt" http://launchpadlibrarian.net/45393142/BootDmesg.txt ** Attachment added: "Card0.Amixer.values.txt" http://launchpadlibrarian.net/45393143/Card0.Amixer.values.txt ** Attachment added: "Card0.Codecs.codec.0.txt" http://launchpadlibrarian.net/45393144/Card0.Codecs.codec.0.txt ** Attachment added: "CurrentDmesg.txt" http://launchpadlibrarian.net/45393145/CurrentDmesg.txt ** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/45393146/Dependencies.txt ** Attachment added: "Lspci.txt" http://launchpadlibrarian.net/45393147/Lspci.txt ** Attachment added: "Lsusb.txt" http://launchpadlibrarian.net/45393148/Lsusb.txt ** Attachment added: "PciMultimedia.txt" http://launchpadlibrarian.net/45393149/PciMultimedia.txt ** Attachment added: "ProcCpuinfo.txt" http://launchpadlibrarian.net/45393150/ProcCpuinfo.txt ** Attachment added: "ProcInterrupts.txt" http://launchpadlibrarian.net/45393151/ProcInterrupts.txt ** Attachment added: "ProcModules.txt" http://launchpadlibrarian.net/45393152/ProcModules.txt ** Attachment added: "UdevDb.txt" http://launchpadlibrarian.net/45393153/UdevDb.txt ** Attachment added: "UdevLog.txt" http://launchpadlibrarian.net/45393154/UdevLog.txt ** Attachment added: "WifiSyslog.txt" http://launchpadlibrarian.net/45393155/WifiSyslog.txt -- Cannot disconnect Nokia 6120c in USB mode using "safely remove drive" https://bugs.launchpad.net/bugs/569952 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 569952] Re: Cannot disconnect Nokia 6120c in USB mode using "safely remove drive"
The same thing is happening with the mainline kernel, 2.6.34-rc4 -- Cannot disconnect Nokia 6120c in USB mode using "safely remove drive" https://bugs.launchpad.net/bugs/569952 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] Re: ubiquity crashed with InstallStepError in configure_hardware()
The problem appears to be fixed for me. I installed by clicking on the "Install Ubuntu..." icon. Note that a) I did not resize any partitions (reused an existing one) and b) I did not have any settings to migrate. -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] Re: ubiquity crashed with InstallStepError in configure_hardware()
@Evan: Update: I tried again, this time with 20100426.2 version and resizing the partition that I wanted to install to. The migration assistant gets stuck here: "Failed to unmount partitions" "Migration assistant needs to mount a partition but cannot do so because the following mount point could not be unmounted: /dev/sda1 Please close any applications using these mount points. Would you like the migration assistant to try to unmount these partitions again?" If I click "continue", the message just redisplays itself after a split second. I can't get past this point. I started the install as soon as the disk had booted, so any applications using that partition are not launched by me. I'm installing to /dev/sdb3. It may be that the previous install I was installing to /dev/sda3, because Lucid is inconsistent about how it labels my hard drives (mix of SATA and IDE). P.S. I can't quit ubiquity without killing it from a terminal. -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] Re: ubiquity crashed with InstallStepError in configure_hardware()
Note to the foregoing: I suppose I could quit ubiquity normally if I went back to the previous screen and then pressed "quit". Didn't think of that (short on sleep, I think) :( -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] apport information
Architecture: i386 DistroRelease: Ubuntu 10.04 LiveMediaBuild: Ubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100426.2) Package: ubiquity 2.2.23 [modified: usr/lib/ubiquity/migration-assistant/ma-ask usr/share/migration-assistant/ma-script-utils bin/hw-detect] PackageArchitecture: i386 ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 Tags: lucid lucid Uname: Linux 2.6.32-21-generic i686 UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] Casper.gz
apport information ** Attachment added: "Casper.gz" http://launchpadlibrarian.net/45600506/Casper.gz -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] Dependencies.txt
apport information ** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/45600533/Dependencies.txt -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] UbiquityDebug.gz
apport information ** Attachment added: "UbiquityDebug.gz" http://launchpadlibrarian.net/45600607/UbiquityDebug.gz -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] UbiquityPartman.gz
apport information ** Attachment added: "UbiquityPartman.gz" http://launchpadlibrarian.net/45601005/UbiquityPartman.gz -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] UbiquitySyslog.gz
apport information ** Attachment added: "UbiquitySyslog.gz" http://launchpadlibrarian.net/45601315/UbiquitySyslog.gz -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 536673] Re: ubiquity crashed with InstallStepError in configure_hardware()
Here is the additional information: "mount" reports: ubu...@ubuntu:~$ mount aufs on / type aufs (rw) none on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev/shm type tmpfs (rw,nosuid,nodev) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) /dev/sda1 on /mnt/migrationassistant type ext3 (rw) ubu...@ubuntu:~$ sudo lsof /mnt/migrationassistant/ lsof: WARNING: can't stat() tmpfs file system /cow Output information may be incomplete. lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/ubuntu/.gvfs Output information may be incomplete. ubu...@ubuntu:~$ The "failed to unmount partitions" message says that the the problem mount point is: /mnt/migrationassistant/home When I say I would like the installer to try to unmount these partitions again, it crashed this time. Here's the lsof output for that directory: ubu...@ubuntu:~$ lsof /mnt/migrationassistant/home lsof: WARNING: can't stat() tmpfs file system /cow Output information may be incomplete. ubu...@ubuntu:~$ The system installed on /dev/sda1 has a separate /home partition. I wonder if this is part of what's causing the problem? I'll be unavailable for further testing for about the next five hours or so. (Meetings and things) -- ubiquity crashed with InstallStepError in configure_hardware() https://bugs.launchpad.net/bugs/536673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 562742] Re: r8169 ethernet MAC address changes in 2.6.32 kernel
After behaving well for a couple of days or so, the mainline kernel has been throwing errors on this over the last several hours, particularly not activating the ethernet chip at all (lights on switch blink slowly). I had noticed that my working ethernet connection was labelled "eth1" instead of "eth0". I altered that in /etc/udev/rules.d/70-persistent- net.rules, removed dhcp3 leases and rebooted. That's when the problem started. Whether that's what caused it, or whether that was a coincidence and a buggy update was the culprit, I have no idea. I'll do a reinstall later today and see what the result is. -- r8169 ethernet MAC address changes in 2.6.32 kernel https://bugs.launchpad.net/bugs/562742 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
@Antonio I wouldn't go so far as to say that a Satellite A10 is unusable, but you will need a /etc/X11/xorg.conf file, using the vesa driver. You can use the configuration from message #74 but with "vesa" instead of "fbdev" as the driver. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 562742] Re: r8169 ethernet MAC address changes in 2.6.32 kernel
@Tim The new kernel has failed to build, according to Launchpad. I'll check back later and install it when it's ready. -- r8169 ethernet MAC address changes in 2.6.32 kernel https://bugs.launchpad.net/bugs/562742 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
@Antonio I agree with your comment about the regular user. Even finding the info can be a bit tricky. For example, I already knew about needing to use "i915.modeset=0 xforcevesa" in the boot line, but I couldn't find it from the front page of the Ubuntu website, even though I knew that there was a page of known issues somewhere. How is an anxious new user going to cope? @Anyone I've encountered a few users who are limited to a resolution of 640x480 or so when they use the vesa driver, and yet their machines are older ones that will do 1024x768. My A10 defaults to 1024x768. What can we do to get a higher resolution for them? Adding modelines doesn't seem to do it. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 572751] Re: Upgraded to Lucid.Wine not running previously-installed programs
I've just discovered that I can run MS Word 2000 if I double-click on a Word file. Just not from the menu. So, is there some way I can rebuild the menu? I don't mind editing text/xml files. -- Upgraded to Lucid.Wine not running previously-installed programs https://bugs.launchpad.net/bugs/572751 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 524938] Re: Remove binary "opensync-plugin-syncml" from lucid
@Stephan Müller Go to http://packages.ubuntu.com and use the search engine to find the packages libsoup-2.2, libsyncml0 and opensync-plugin-syncml and download them. Install them in that order by double-clicking on them. Alternatively, if you have them all in one directory with no other debs present, it should be possible to cd to that directory in a terminal and issue the command: sudo dpkg -i *.deb (but I haven't tried it myself, so I can't be sure it will work). -- Remove binary "opensync-plugin-syncml" from lucid https://bugs.launchpad.net/bugs/524938 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 570947] Re: OS prober chooses /dev/sdX notation when UUIDs requested
I was playing with Debian Stable yesterday and I noticed that grub2 in Lucid would not use UUIDs for its menu entries. Lucid also uses /dev/sdX notation. Since Debian uses /dev/hdX for IDE drives, the entries are unusable and I had to create a custom workaround. The problem arises with Hardy (2.6.24) and Debian Stable (2.6.26), but not with Debian Testing (2.6.32 and 2.6.30) Does this have something to do with older kernels or libraries, perhaps? -- OS prober chooses /dev/sdX notation when UUIDs requested https://bugs.launchpad.net/bugs/570947 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 562742] Re: r8169 ethernet MAC address changes in 2.6.32 kernel
@Tim: I've installed the kernel linux-image-2.6.32-22-generic_2.6.32-22.33.lp562742.3_i386 and rebooted several times. So far, it's behaving fine, but I'd like to test it for a couple of days before making a definite statement. -- r8169 ethernet MAC address changes in 2.6.32 kernel https://bugs.launchpad.net/bugs/562742 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 562742] Re: r8169 ethernet MAC address changes in 2.6.32 kernel
PS: That is without using the firmware from the PPA; just the standard Ubuntu version. -- r8169 ethernet MAC address changes in 2.6.32 kernel https://bugs.launchpad.net/bugs/562742 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 562742] Re: r8169 ethernet MAC address changes in 2.6.32 kernel
After further testing, I finally encountered an error: the ethernet chip not being activated at all (slow blink on ethernet switch, no connection). However, to my surprise, I was able to fix it by issuing the commands: sudo rmmod r8169 sudo modprobe r8169 No turning off at the wall, or even rebooting needed. (The first command may not have been necessary.) It's kept the correct MAC address throughout. I wonder if this is connected with booting between other distros. I've had it happen occasionally in the past when I was playing with Puppy linux and running Hardy as my main OS. -- r8169 ethernet MAC address changes in 2.6.32 kernel https://bugs.launchpad.net/bugs/562742 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 465942] Re: Hardware device disappearing from Sound Preferences
Here's something interesting: This is the output just after I've logged in: USERPID ACCESS COMMAND /dev/snd/controlC0: ja 1659 F pulseaudio When I open the sound preferences applet: USERPID ACCESS COMMAND /dev/snd/controlC0: ja 1659 F pulseaudio /dev/snd/pcmC0D0c: ja 1659 F...m pulseaudio When I close the applet, the output to the command goes back to the first one. I've installed some non-free codecs/plugins (for mp3 and aac files) and I've noticed that the sound hardware is slower to disappear since I did that. (Which is why I can close the applet before the sound disappears.) But it does eventually if I leave the applet open - takes a minute or two. -- Hardware device disappearing from Sound Preferences https://bugs.launchpad.net/bugs/465942 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 499399] Re: unable to install or start as live-cd daily build 22.12.09 Lucid
I've added the output of lshw for this computer. ** Attachment added: "output of lshw" http://launchpadlibrarian.net/39338483/hw-desktop.txt -- unable to install or start as live-cd daily build 22.12.09 Lucid https://bugs.launchpad.net/bugs/499399 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 499399] Re: unable to install or start as live-cd daily build 22.12.09 Lucid
I've been trying the daily-live CD images regularly and still cannot boot as of 17 February. I've attached a screenshot in case that gives any extra information. The changing of the ethernet MAC address is still occurring, but not on every attempt. Sometimes, the swap partition gets mounted, but again, not on every attempt. I'd like to know if there are any kernel line options I could try to either help debug the problem or to allow me to boot to the desktop, preferably the latter. ** Attachment added: "lucid_boot.jpg" http://launchpadlibrarian.net/39338464/lucid_boot.jpg -- unable to install or start as live-cd daily build 22.12.09 Lucid https://bugs.launchpad.net/bugs/499399 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 524761] [NEW] /etc/environment not being read in Lucid
Public bug reported: When I boot up, the /etc/environment file isn't being read, meaning that the default $PATH variable is very short, and any other items that I've added don't get added to the environment. This is happening on my EeePC 900 which is running Lucid with lxde and openbox. It's not happening on my Toshiba Satellite A10 which is running Xubuntu. Therefore, I suspect that it's something to do with lxde/openbox. My current workaround for this is to add a file, 98environment, to the /etc/X11/Xsession.d directory. Adding lines to /etc/rc.local didn't work. ** Affects: ubuntu Importance: Undecided Status: New -- /etc/environment not being read in Lucid https://bugs.launchpad.net/bugs/524761 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 524761] Re: /etc/environment not being read in Lucid
Update: I made another experimental installation with openbox only, and /etc/environment was read successfully. Then I removed all lxde elements from the main installation, with the exception of lxterminal, which does not depend on any other lxde files, plus my temporary 98environment script mentioned above. /etc/environment is now being read successfully in this installation as well. Therefore, it seems to me that the source of the problem lies somewhere in the lxde libraries. -- /etc/environment not being read in Lucid https://bugs.launchpad.net/bugs/524761 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 426027] Re: /dev/disk/by-uuid doesn't exist in karmic kernels
I have this problem also. I added a second internal HDD to my desktop computer and thought that UUIDs would be a better method than the /dev/sdXY notation I'd been using, but I got the /dev/disk/by-uuid doesn't exist message. Blkid does work for me in Karmic, but for some reason Karmic sees my original drive as /dev/sdb while Hardy sees the same drive as /dev/sda. Altering GRUB (legacy) to /dev/sdb for Karmic at least lets me boot. I also had to run update-initramfs before I could access other partitions properly from Karmic. -- /dev/disk/by-uuid doesn't exist in karmic kernels https://bugs.launchpad.net/bugs/426027 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
The laptop acquired an extra 512MB of RAM yesterday, and I thought it might be useful to reinstall Xubuntu with all updates and see what happens. Installation method was to install a command-line system first, then install Xubuntu-desktop plus do other updates before rebooting and logging into the Xubuntu desktop. Unfortunately, the system froze twice. The first time after 1-3/4 hours and the second a lot sooner - probably around 30 minutes, maybe less. I've run the laptop for many hours at a time while using lxde/openbox or openbox on its own. I've tried using just the xfce4 package as well and it seems to be fine, though this might need a bit more testing. Therefore, I'm inclined to conclude that one or more of the Xubuntu- desktop components is/are interacting with xserver-xorg-video-intel to cause the freezes. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
@Geir Lucid is already on the laptop, with lxde and openbox as desktop environments. I can make an image of the installation (so that I can put it back later) and then install Xubuntu-desktop and do some testing. I take it that ideally you'd like batchbuffer dumps from both the standard Ubuntu kernel plus the latest mainline kernel. I hope to have something to report in a day or two, other commitments allowing. :) -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
I've been testing with Xubuntu, ubuntu kernel version 2.6.32-11 libdrm2 version 2.4.17+git20100120 xserver-xorg-video-intel version 2:2.10.0+git20100120 The first test was after installing xubuntu-desktop metapackage, but leaving all my other stuff installed. Uptime was 6.5 hours with no freezes. I even turned on Xubuntu's window compositor to see if that would make a difference, and nothing happened. Not being sure that something I'd previously installed was affecting the results, I did a fresh install of Xubuntu and ran another test. Same result. Uptime of nearly 4.5 hours, including some use of the window compositor, and no freeze. I am noticing some visual artifacts: occasional streaking (white background with pixellated colour) and bits being left out of type. I've attached a small screenshot of the latter. Interestingly, the letter affected varies from instance to instance, but when it happens, the same letter is affected universally throughout the page. Often, a screen refresh or scrolling up and down will fix it. I think that the xorg-edgers drivers may be heavier on RAM than the standard ones. ** Attachment added: "visual artifacts with xorg-edgers drivers" http://launchpadlibrarian.net/38354447/Screenshot-type.png -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
@Geir Standard Xubuntu Lucid froze after 5 hours of uptime. If it's of any relevance, I was playing Freecell when it happened, and I was trying to move a group of cards from the left-hand-most pile. On previous occasions, this action has caused freezes. I was playing Freecell at various times during the test, so am unclear why it took so long for the freeze to occur. The batchbuffer files are attached. I was unable to get all of them by ssh because trying to get the i915 stuff caused a complete lockup. I had to get :0.log by booting a rescue CD and copying it that way. I hope that it's still usable. ** Attachment added: "dri_debug-20100126.tgz" http://launchpadlibrarian.net/38384076/dri_debug-20100126.tgz -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
>so am unclear why it took so long for the freeze to occur. I just remembered that I'd turned on desktop effects not long previously, to try and cause something to happen, if it was going to. That may be a contributing factor. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
Further tests: I installed the xorg.conf file from https://bugs.launchpad.net/bugs/447892, comment 41, so as to see what happens if I use the VESA driver. Without the addition of acpi=off to Grub, the laptop hangs at a blank screen with a cursor once it's got past the initial XFCE mouse screen. If I add acpi=off to the kernel line, then it boots completely and behaves much the same as the Intel driver. That is, I still get these unexpected screen blackouts at more or less 3/4 hour to 1 hour intervals. Moving the mouse (usb) does not revive the screen but pressing an arrow key or touching the touchpad does. No data is lost, but it's a bit disconcerting. I booted into Ubuntu 8.04 for several hours this morning, and it's not happening there, so I don't think there's a hardware fault. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 509060] [NEW] Lucid lxde-common doesn't include xserver-xorg in dependencies
Public bug reported: Binary package hint: lxde-core I installed a command-line version of the Lucid alpha2 release on my EeePC 900. Then I installed lxde-core rather than the full lubuntu- desktop metapackage. Xserver-xorg was not installed as a dependency, which caused me some confusion when I attempted to boot into the lxde desktop. At first, I thought the machine had locked up altogether, rather than simply being without an X11 environment. Installling xserver-xorg separately solved the problem. ** Affects: lxde-common (Ubuntu) Importance: Undecided Status: New -- Lucid lxde-common doesn't include xserver-xorg in dependencies https://bugs.launchpad.net/bugs/509060 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 508754] Re: Trackpoint settings for wheel emulation in gpointing-device-settings are non-persistent
I'm having a similar problem but with touchpad settings. I have Lucid installed on two different laptops with two different types of touchpad. They are Toshiba Satellite A10 with an Alps Glidepoint touchpad and EeePC 900 with a Synaptics Elantech touchpad. I like to turn off tap-to-click, because I find it more trouble than it's worth. I can do this by using gpointing-device-settings, but the original state reoccurs after rebooting. -- Trackpoint settings for wheel emulation in gpointing-device-settings are non-persistent https://bugs.launchpad.net/bugs/508754 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 508754] Re: Trackpoint settings for wheel emulation in gpointing-device-settings are non-persistent
I've just discovered the same problem in Karmic on the Toshiba laptop. In all cases, I'm using the lxde desktop. -- Trackpoint settings for wheel emulation in gpointing-device-settings are non-persistent https://bugs.launchpad.net/bugs/508754 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 509060] Re: Lucid lxde-common doesn't include xserver-xorg in dependencies
I am noticing some other odd behaviour on this installationl. I set the wallpaper and terminal program preferences in pcman, and as soon as I log out and in again, they have disappeared. The desktop is black, and pcman complains that no terminal program has been set for "open in terminal". I wonder if there is some other dependency that's missing which is causing the problem. I have a Toshiba satellite A10 with a Lucid install which doesn't have this problem. In this case, I originally installed Lubuntu-desktop and subsequently removed packages that I didn't want. -- Lucid lxde-common doesn't include xserver-xorg in dependencies https://bugs.launchpad.net/bugs/509060 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
I noticed that there was an xserver-xorg-video-intel update yesterday. Today I booted with the standard kernel option (i.e. without "apci=off") and the laptop has been running for 8 hours without lockup. I'm running the standard kernel and xserver-xorg drivers. I recently removed most of the Xubuntu/xfce stuff because this machine is somewhat RAM-challenged (256MB) and I installed lxde and openbox instead. I don't know if the different desktop environment would make any difference. Someone in another thread mentioned that no lockups occurred under IceWM, which is why I wonder if it might affect things. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 499399] Re: unable to install or start as live-cd daily build 22.12.09 Lucid
Latest attempt to boot from the live CD of 30 Jan resulted in a new message: init: ureadahead-other main process (1512) terminated with status 4 init: ureadahead-other main process (1513) terminated with status 4 could not read bytes: Broken pipe The last line hasn't appeared previously. -- unable to install or start as live-cd daily build 22.12.09 Lucid https://bugs.launchpad.net/bugs/499399 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 514913] Re: orage crashed with signal 5
Crash happens when I have added a .ics file as a "foreign file" and it's on an nfs volume which I have forgotten to mount. If the file gets damaged, then orage will crash even if the file is accessible. If the file is intact and I mount the nfs volume, orage behaves normally. I don't want to upload the foreign .ics file because it contains semi-confidential information (not sure if that's what juha wants). There is no other data in the main orage.ics file. Removing .oragerc and letting orage generate a new one fixed the problem. Not a very convenient solution, though :) .xsession-errors file is attached ** Attachment added: ".xsession-errors file" http://launchpadlibrarian.net/38677365/.xsession-errors -- orage crashed with signal 5 https://bugs.launchpad.net/bugs/514913 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 524761] Re: /etc/environment not being read in Lucid
@Julien Lavergne I've been experimenting with lightweight installations built up from a command-line install. I have been using lxdm, xdm, qingy and sometimes no login manager. I did some further experimentation, namely installing lxdm with no- recommends on an openbox-only install, and the same problem appeared. I've just found that qingy creates the same or a similar problem, so I've removed it. (I imagine, though, that this would be outside of your area of concern.) So, essentially, the problem of /etc/environment not being read occurs when I have lxde-core/lxde-common or lxdm (or qingy) installed. -- /etc/environment not being read in Lucid https://bugs.launchpad.net/bugs/524761 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 524761] Re: /etc/environment not being read in Lucid
@Julien I need to clarify what I wrote. lxdm can be installed but not the active login manager, and /etc/environment is read correctly. It is only when it is the default/active login manager that the problem arises. -- /etc/environment not being read in Lucid https://bugs.launchpad.net/bugs/524761 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 524761] Re: /etc/environment not being read in Lucid
@Julien These are the results of my own tests: lxdm installed --no-recommends is now allowing $PATH to be read from /etc/environment. lxde-core/common installed with the --no-recommends option is now allowing $PATH to be read from /etc/environment, both with and without lxdm installed. I'm not sure what happened earlier to cause me to think that there was a problem with lxde on its own. I wasn't using fancy login scripts to login without a desktop manager - just "startx". Maybe a stray configuration file that I hadn't removed was the culprit, though that's only a guess. Anyway, all is working properly now. -- /etc/environment not being read in Lucid https://bugs.launchpad.net/bugs/524761 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 522375] Re: Lucid: "memory protection from ptrace spying" not enabled?
Update: I downloaded the source code of the latest Gringotts from the developer's site and compiled it on my Hardy box. The same problem occurs: "Memory protection from ptrace spying" is marked with a red button, and overall security level is marked "low". There is no configure option to enable or disable this protection. Therefore, I think we can say that this is an upstream issue. -- Lucid: "memory protection from ptrace spying" not enabled? https://bugs.launchpad.net/bugs/522375 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 526180] Re: grub-common conflicts with grub-doc
I've noticed the same thing. I'm wanting to install grub in Lucid, because grub2 is too enthusiastic about installing to the MBR when I've already got another Ubuntu install in another partition which uses grub. But when I install grub into Lucid, I still end up with grub2 because of this dependency. I don't see why grub has grub-common as a dependency. It doesn't in Hardy, and yes, grub2 is an option even in the Hardy repositories. -- grub-common conflicts with grub-doc https://bugs.launchpad.net/bugs/526180 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 373889] Re: can no longer send files from nokia phones to PC via bluetooth
Not sure if this is the right place to post this, but I'm finding I've still got the same problem with Karmic (today's image). My Nokia 6120c will not send files to the PC, though it works in the other direction. Same hardware as above. -- can no longer send files from nokia phones to PC via bluetooth https://bugs.launchpad.net/bugs/373889 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 373889] Re: can no longer send files from nokia phones to PC via bluetooth
Sorry, I spoke too soon! Installed Blueman, and all seems to work now. -- can no longer send files from nokia phones to PC via bluetooth https://bugs.launchpad.net/bugs/373889 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
@Ben Yes, there is a workaround. 1) Add "acpi=off" (without the quotes characters) to kernel line in Grub. It should end like this: acpi=off quiet splash 2)Edit /etc/modules and add a new line: "apm power_off=1" I'm still getting the screen suddenly go blank from time to time, but I restore it by pressing an arrow key or by touching the touchpad. No data is lost. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
Upgraded to the latest standard Karmic kernel, along with various other updates (but none for xserver-xorg-video-intel, I noticed). The laptop locked up after about 10 minutes or so, that is, without acpi=off in the Grub kernel command line. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
I see that this bug is still marked "incomplete". Is there something else I should be doing to help progress? -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
I found a fix for the shutdown problem here: http://ubuntuforums.org/archive/index.php/t-417028.html It may take a while before I know if that's caused any other problems. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
I'd like to clarify a couple of things, if I may. I think that desktop effects are already turned off. I'm not that familiar with Xubuntu, and I'm just running with the default settings. The compositor is turned off in the Window Manager Tweaks application. Is there something else I need to do as well? I've never had the computer hang if I leave it and do nothing, even when logged in. I seem to have to be doing something active such as scrolling through documents or changing tabs in Firefox. How long would I need to leave inactive it to be sure? So far, the new settings have meant I can actually use the computer for several hours. There is still this mysterious sudden blanking of the screen, but it's not a freeze or xserver crash and touching the touchpad or pressing an arrow key reactivates it. By the way, I had to uninstall the xorg-edgers version of xserver-xorg- video-intel because it wouldn't let me boot with acpi=off. On boot up a rapidly blinking text message would appear and the computer hung. I didn't make a note of it, unfortunately. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 477256] Re: [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM)
Installed mainline kernel v2.6.32-rc7, dated 13 November. The machine locked up as usual, but with one difference: I could use cntrl-alt-F2 to access tty2. Running TOP showed nothing unusual. I tried restarting gdm but it did no good. On reboot it hung at "loading modem drivers" or similar wording. -- [i855] Xserver freezing on Toshiba Satellite A10 (Intel 82852/855GM) https://bugs.launchpad.net/bugs/477256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 499399] Re: unable to install or start as live-cd daily build 22.12.09 Lucid
As was suggested to someone else in another bug, I'm posting the syslog from adding --verbose to the kernel line. This is from the hard disk install using kernel 2.6.32-19. Also, a screenshot taken after the system had locked up. (I don't think that this info was recorded in the logfile.) ** Attachment added: "syslog.lucid.20100412.txt" http://launchpadlibrarian.net/43860982/syslog.lucid.20100412.txt -- unable to install or start as live-cd daily build 22.12.09 Lucid https://bugs.launchpad.net/bugs/499399 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 499399] Re: unable to install or start as live-cd daily build 22.12.09 Lucid
** Attachment added: "screenshot12042010.jpg" http://launchpadlibrarian.net/43861295/screenshot12042010.jpg -- unable to install or start as live-cd daily build 22.12.09 Lucid https://bugs.launchpad.net/bugs/499399 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 558569] Re: Unable start as live cd Lucid Beta 2
@Steve Langasek I'm following this bug because it seems to be very similar to (if not a duplicate of) bug 499399 which has affected me for several months. I don't want to clutter up this report with extraneous attachments, so I have posted the output of the kernel line with --verbose to bug 499399 in case it's useful. -- Unable start as live cd Lucid Beta 2 https://bugs.launchpad.net/bugs/558569 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 524938] Re: Remove binary "opensync-plugin-syncml" from lucid
I understand that updating is going to cause problems. I have been playing with Debian Testing and I've found that the updated syncML plugin (0.39) doesn't work with the other 0.22 plugins. However, what's the reason we can't leave the existing 0.22 version in the repository? Could the obsolete dependencies be given a slightly altered name to keep them separate from the later versions? -- Remove binary "opensync-plugin-syncml" from lucid https://bugs.launchpad.net/bugs/524938 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
