[Bug 138691] Re: system hangs at shutdown

[Derek White]

I went into recovery mode several times today to check my drive and try
it out since I've never used it before. I had no "halt:" errors this
time, just my usual "ata1.00:" errors. I tried using 'shutdown' with -r,
-h, -H, and -HF and all resulted in ata1.00 errors from recovery console
and gnome-terminal.

I just tried adding "apm power_off=1" and it made no difference. I got
the normal network messages, screen flickered to the splash screen with
a completely black bar and the devices inside my tower sounded like they
powered down immediately when the splash came up. Then it just sits
there until the "ata1.00:" error. Hence, I removed it.

To me, it seems like program 'A' powers down the HDs before program 'B'
(the one that produces the "ata1.00:" errors) is done with it. In System
> Administration > Services I have both acpid and apmd running (default
8.04 install from LiveCD). This was the same in 7.10; so, it's most
likely normal, but I figured it was worth mentioning.

I decided to write down the error and this is what happens:

...
*Unmounting temp filesystems...
*Deactivating swap...
*Unmounting local filesystems...
*Will now halt
halt: Unable to iterate IDE devices: No such file or directory
[time] ata1.00: Exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[time] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[time] ata1.00: status: {DRDY}
[time] ata1.01: revalidation failed (errno=-5)

[time] ata1.01: revalidation failed (errno=-5)

[time] ata1.01: revalidation failed (errno=-5)

[time] ata1.01: revalidation failed (errno=-5)

[time] ata1.01: revalidation failed (errno=-5)

[time] ata1.01: revalidation failed (errno=-5)
<5 seconds goes by and system powers down!>

So, Yay!? It powers down after awhile...I guess that's good new?

-- 
system hangs at shutdown
https://bugs.launchpad.net/bugs/138691
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 267828] Re: switch user does not work

[Derek White]

Ditto.

>From the screen-saver lock screen dialog, click switch user, display
resets itself, blank screen appears, move mouse and lock screen dialog
reappears. Most of the time it only takes 2 tries to have success.
Rarely, it simply won't go and I have to log in and switch user from the
gnome menu. After the problem shows itself and I log back into the
account (which is an admin account) I get an error dialog saying
roughly: "The X server failed to start properly. Perhaps the server is
not setup correctly." The error message dialog is small and is properly
themed. It does not match the one in the screen-shot above.

ATI Radeon 9550
Jockey fglrx drivers

-- 
switch user does not work
https://bugs.launchpad.net/bugs/267828
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 297049] Re: Firefox froze computer.

[Derek White]

Accidentally added Mozilla Firefox while trying to add sun-java-jre,
guess java isn't bugged here...Can someone remove it and add java as
"Also Affects"?

** Visibility changed to: Public

-- 
Firefox froze computer.
https://bugs.launchpad.net/bugs/297049
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 298536] Re: Appointment title missing from systray dialog.

[Derek White]

Posted upstream at http://bugzilla.gnome.org/show_bug.cgi?id=561302.

-- 
Appointment title missing from systray dialog.
https://bugs.launchpad.net/bugs/298536
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 293395] Re: Graphical artifacts present when resuming from sleep.

[Derek White]

Switching console seems to work.

Also, with the jockey version of fglrx, the problem is not there.

-- 
Graphical artifacts present when resuming from sleep.
https://bugs.launchpad.net/bugs/293395
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 298536] [NEW] Appointment title missing from systray dialog.

[Derek White]

Public bug reported:

Binary package hint: evolution

Setup an appointment a few days ago.
It went off this morning, then again 2 more times because of the alarms/etc.
When I got up a few minutes ago, and unlocked my computer (it wasn't asleep, 
just monitor off), I clicked the systray icon and the dialog was as seen in the 
attached screen shot.
I could click on all three 'rows' of titles, but the actual text was not there.

My previous alarm, which went off this past Tuesday, showed up just fine.
This was the second appointment I have ever used on 8.10.

When I click on the time/date to bring up the calendar/appt/locations,
the appointment shows up just fine. It also shows up fine in Evolution.

ProblemType: Bug
Architecture: i386
DistroRelease: Ubuntu 8.10
ExecutablePath: /usr/bin/evolution
Package: evolution 2.24.1-0ubuntu2
ProcEnviron:
 PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: evolution
Uname: Linux 2.6.27-7-generic i686

** Affects: evolution (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug

-- 
Appointment title missing from systray dialog.
https://bugs.launchpad.net/bugs/298536
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 298536] Re: Appointment title missing from systray dialog.

[Derek White]

** Attachment added: "MissingAppointments.png"
   http://launchpadlibrarian.net/19678302/MissingAppointments.png

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/19678303/Dependencies.txt

** Attachment added: "ProcMaps.txt"
   http://launchpadlibrarian.net/19678304/ProcMaps.txt

** Attachment added: "ProcStatus.txt"
   http://launchpadlibrarian.net/19678305/ProcStatus.txt

-- 
Appointment title missing from systray dialog.
https://bugs.launchpad.net/bugs/298536
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 281633] Re: Can't burn/erase cd using brasero

[Derek White]

I am getting the same problem on my Sony DVD drive (DRU-830A) using
Brasero.

Downloaded a mp3 for a friend: http://podcast.kingschurchjax.com/012509samw.mp3
Opened Brasero, clicked the button to start an Audio CD
Dragged the mp3 from my desktop to the Brasero window and dropped it
After a minute or two (its a big mp3 and I'm on a 1.5Ghz) the info loaded, and 
I changed the title/artist
Put in an 80 minute CD, canceled Ubuntu's blank CD auto-run dialog
Brasero automatically selected the CD I inserted
Clicked the Burn button, then clicked Properties
At this point, I see my weird speed listings: Max speed, 31.9 x (CD), 23.9 x 
(CD), 16.0 x (CD), 8.0 x (CD), 8.0 x (CD)

[ A tiny tangent. ]
Yup, that's two 8.0x speed settings. (Why? Another bug? Been like that forever, 
since my first Ubuntu: 7.10.)

Selected 16.0 x (CD) [As I said, I have a slower system - it can't keep up with 
24x (or 23.9 x - stupid Brasero) and definitely not 32x]
Burn directly, and burnproof both checked
Simulate is grayed out
Eject is checked
Temp files set to /tmp with 3.9GB free-space
Clicked OK to start the burn process

Brasero took awhile (again) to prepare, then started burning it.
It got to roughly 7%, then started fixating the drive for some reason, like it 
would do when finished burning.
The dialog never went away. After about 5 minutes the graphics on the dialog 
would not redraw after minimize/restore and I clicked X, waited for it to not 
respond, and let Ubuntu stop it.

I removed the CD, it was partially burnt, Ubuntu loaded it up as an
audio-cd with Japanese/Chinese text, lol, now part of my Tesla coil
collection. I restarted Brasero, and started over using the same process
detailed above, except I choose the top-most 8.0 x (CD) setting for the
speed and unchecked burn directly without saving. When I hit OK to start
the burn, I immediately got the "Session error : the drive can't be
locked (ongoing burning process) (brasero_burn_record burn.c:2524)"
error.

I closed down Brasero, checked System Monitor for Brasero, cdrecord,
anything out of the ordinary. The only thing I found was that gvfsd-burn
was open and using a third of a MB of memory; gvfsd-http was also open
using half a MB, even with firefox closed down after dl'ing the mp3.

[ Questions about bug. ]
It seems like gvfs has been going through major updates lately, could 
gvfs-backends (which includes -burn) be causing this? Or is -burn only used 
with nautilus...

Anyways, that's where I am. I am sure a reboot would fix this, but there
should be no reason for that.

My drive can be opened, closed, mounted, ejected, etc. all OK, why does Brasero 
think it's in use?
What does Brasero use to lock the drive for burning?
How can I reverse it, since the force quit of Brasero left it there?
Can this be done automatically when Brasero starts? (i.e. - check to see if 
drive is REALLY in use?)

[ Other thoughts. ]
Finally, if anyone can help me, why did Brasero start fixating after 7%? 
Shouldn't burnproof have prevented a buffer under-run?

P.S. - 'Places' > 'CD/DVD Creator' > Add a file...or more > 'Write to
Disc' lists 37.6x, 28.2x, 18.8x, & 9.4x as my speeds. Why is everything
different? My drive really can't do all this...shouldn't it be
calculated the same way in all programs across the board?
Inconsistencies should not be this apparent for the same drive.

-- 
Can't burn/erase cd using brasero
https://bugs.launchpad.net/bugs/281633
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 276603] Re: crashed while listening to a mp3 podcast

[Derek White]

Was this supposed to fix the problems with rhythmbox when downloading
multiple podcasts and gvfsd-http eats memory, too?

-- 
crashed while listening to a mp3 podcast
https://bugs.launchpad.net/bugs/276603
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 297049] Re: Firefox froze computer.

[Derek White]

** Changed in: firefox
   Status: New => Incomplete

** Changed in: firefox-3.0 (Ubuntu)
   Status: New => Incomplete

-- 
Firefox froze computer.
https://bugs.launchpad.net/bugs/297049
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 279774] Re: Firefox only restores previous session/tabs when restarting after disabling an extension, if Browsing History is cleared at close.

[Derek White]

Been a while...

Should this have been reported upstream, or what needs done to fix it?
Because I am still leaving the clear browser history check-box un-
checked, but would like to check it and preserve my saved tabs. With it
checked, during an extension induced restart, tabs are preserved, so I
know the functionality is in the code, it just needs to be activated for
saved tabs as well.

-- 
Firefox only restores previous session/tabs when restarting after disabling an 
extension, if Browsing History is cleared at close.
https://bugs.launchpad.net/bugs/279774
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 273792] Re: firefox does not remember saved tabs between sessions

[Derek White]

*** This bug is a duplicate of bug 279774 ***
https://bugs.launchpad.net/bugs/279774

** This bug has been marked a duplicate of bug 279774
   Firefox only restores previous session/tabs when restarting after disabling 
an extension, if Browsing History is cleared at close.

-- 
firefox does not remember saved tabs between sessions
https://bugs.launchpad.net/bugs/273792
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 384622] Re: When a CDMA connection is established, the notify-osd bubble flashes several times before settling.

[Derek White]

Maybe this will do.
>From ~/.cache/notify-osd.log:
[2009-06-16T16:00:21-00:00, NetworkManager ] Connection Established
You are now connected to 'VZAccess'.

[2009-06-16T16:00:21-00:00, NetworkManager ] Connection Established
You are now connected to 'VZAccess'.

[2009-06-16T16:00:22-00:00, NetworkManager ] Connection Established
You are now connected to 'VZAccess'.

[2009-06-16T16:00:22-00:00, NetworkManager ] Connection Established
You are now connected to 'VZAccess'.

[2009-06-16T16:00:22-00:00, NetworkManager ] Connection Established
You are now connected to 'VZAccess'.

[2009-06-16T16:00:23-00:00, NetworkManager ] Connection Established
You are now connected to 'VZAccess'.

[2009-06-16T16:00:23-00:00, NetworkManager ] Connection Established
You are now connected to 'VZAccess'.

[2009-06-16T16:00:23-00:00, NetworkManager ] Connection Established
You are now connected to 'VZAccess'.

[2009-06-16T16:00:23-00:00, NetworkManager ] Connection Established
You are now connected to 'VZAccess'.

[2009-06-16T16:00:23-00:00, NetworkManager ] Connection Established
You are now connected to 'VZAccess'.


10 messages were sent in a 2 second span. That is what seems to cause the 
flashing.

-- 
When a CDMA connection is established, the notify-osd bubble flashes several 
times before settling.
https://bugs.launchpad.net/bugs/384622
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 384642] Re: "Connect automatically" CDMA connection displays incorrect nm-applet icon & notify-osd messages when manually disconnected.

[Derek White]

Maybe this will help, from ~/.cache/notify-osd.log:
[2009-06-16T03:27:41-00:00, NetworkManager ] Network
Disconnected

[2009-06-16T03:27:52-00:00, NetworkManager ] Network
Disconnected - you are now offline

The first message is referred to in step 3 above and the second is in step 4 
above.
Also, I made a mistake in step 4, there is no icon present for disconnections 
in the notify-osd bubble - icons only appear when connected. All nm-applet 
icons are as stated.

NOTE: At step 4, occasionally the CDMA connection gets reconnected... It
happens rarely and I cannot seem to reproduce it on demand.

-- 
"Connect automatically" CDMA connection displays incorrect nm-applet icon & 
notify-osd messages when manually disconnected.
https://bugs.launchpad.net/bugs/384642
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 384622] Re: When a CDMA connection is established, the notify-osd bubble flashes several times before settling.

[Derek White]

Not quite, the messages blink very quickly, over-writing the previous one. 
Maybe speed up your video by 20x and that will be it.
After the final one blinks/is displayed, it remains for the normal duration of 
bubbles.

-- 
When a CDMA connection is established, the notify-osd bubble flashes several 
times before settling.
https://bugs.launchpad.net/bugs/384622
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 305587] Re: [Jaunty] warning: missing LSB information

[Derek White]

Setting up linux-restricted-modules-common (2.6.28-13.17) ...
update-rc.d: warning: /etc/init.d/linux-restricted-modules-common missing LSB 
information
update-rc.d: see 

Is it safe to restart and use the new kernel?

-- 
[Jaunty] warning: missing LSB information 
https://bugs.launchpad.net/bugs/305587
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 228876] Re: Seahorse crashes when revoking a subkey

[Derek White]

More information to go along with Ted's gdb backtrace.

1] Revoke, Superseded - blank comment field. Seahorse gives dialog:
Couldn't revoke subkey
General error

And .xsession-errors shows:
** (seahorse:6771): CRITICAL **: file seahorse-gpgme-key-op.c: line 1759 
(rev_subkey_transit): should not be reached


2] Revoke, Superseded - anything entered in comment field. Seahorse exits and 
.xsession-errors shows:
seahorse: rungpg.c:652: command_handler: Assertion `gpg->cmd.code' failed.


How can I start talk about finding a replacement for seahorse in Ubuntu - I've 
had nothing but trouble since 8.04. It can't sync properly, it lets you sign 
your own key but wont let you see/remove the sig, and now it can't revoke. 
Useless.

-- 
Seahorse crashes when revoking a subkey
https://bugs.launchpad.net/bugs/228876
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 390448] Re: [On UPS Power] Display sleep inactivity stuck.

[Derek White]

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/28187476/Dependencies.txt

-- 
[On UPS Power] Display sleep inactivity stuck.
https://bugs.launchpad.net/bugs/390448
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 390448] [NEW] [On UPS Power] Display sleep inactivity stuck.

[Derek White]

Public bug reported:

Binary package hint: gnome-power-manager

This has been a problem for me forever: since I installed 8.04, upgraded
to 8.10, re-installed 8.10, and upgraded to 9.04.

In gnome-power-preferences on the "On UPS Power" tab, the "Put display
to sleep when inactive for:" slider is stuck on 23. When I say stuck, I
don't mean I cannot move the slider. I can move it from 1 to 61 just
fine, but once I close the window and re-open it, the slider is back at
23. My changes are ignored.

The problem with this is obvious.

ProblemType: Bug
ACAdapter: Not Present
Architecture: i386
Battery: Present
CPUScaling: Present
DistroRelease: Ubuntu 9.04
LaptopPanel: Not Present
Package: gnome-power-manager 2.24.2-2ubuntu8
ProcEnviron:
 PATH=(custom, user)
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: gnome-power-manager
Uname: Linux 2.6.28-13-generic i686

** Affects: gnome-power-manager (Ubuntu)
 Importance: Undecided
 Status: New

-- 
[On UPS Power] Display sleep inactivity stuck.
https://bugs.launchpad.net/bugs/390448
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 390448] Re: [On UPS Power] Display sleep inactivity stuck.

[Derek White]

About "CPUScaling: Present"...
Not sure if it's the same thing, but powernowd is disabled and everything I 
have looked for says that my CPU cannot be scaled by Linux - only the BIOS can 
when it's overheating.

-- 
[On UPS Power] Display sleep inactivity stuck.
https://bugs.launchpad.net/bugs/390448
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 390459] [NEW] Sliders do not reset when screensaver is disabled

[Derek White]

Public bug reported:

Binary package hint: gnome-power-manager

I disabled the "Activate screensaver when computer is idle" check-box in
gnome-screensaver-preferences.

I expected gnome-power-manager to recalculate the sliders to start at 1
minute; or I expected gpm to continue using screensaver's "...idle
after" time as the base.

Neither happened.

screensaver's "...idle after" slider is set to 25 minutes.
gpm's "On AC Power" tab's Actions and Display sliders both start at 26 minutes.
gpm's "On AC Power" tab's Display slider is set to 30 minutes.

After 5 minutes my display goes to sleep. It is completely ignoring the
25 minute idle limit I set and is taking the 30 minutes and subtracting
the 25 minute idle time from it giving me 5 minutes before my display
turns off.

When can we get these two preferences on the same dialog box and
actually have them work!?

** Affects: gnome-power-manager (Ubuntu)
 Importance: Undecided
 Status: New

-- 
Sliders do not reset when screensaver is disabled
https://bugs.launchpad.net/bugs/390459
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 390460] [NEW] [On UPS Power] Sleep inactivity cannot go lower than 26 minutes

[Derek White]

Public bug reported:

Binary package hint: gnome-power-manager

gnome-power-preferences > On UPS Power tab.

"Put computer to sleep when inactive for:" slider will not go lower than
26 minutes.

I can tell it's tied into the screensaver idle time. This may be
appropriate for a laptop, but is grossly incorrect for a desktop using a
battery backup. If I have a power outage, my screensaver settings should
go out the window.

When on UPS power, sleep inactivity should not be tied to screensaver
idle time.

** Affects: gnome-power-manager (Ubuntu)
 Importance: Undecided
 Status: New

-- 
[On UPS Power] Sleep inactivity cannot go lower than 26 minutes
https://bugs.launchpad.net/bugs/390460
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 390476] [NEW] gpm manual is too vague and geared towards laptops

[Derek White]

Public bug reported:

Binary package hint: ubuntu-docs

Specifically, Advanced Preferences, sections 6.1 & 6.2.

"By default, GNOME Power Manager supports a simple locking scheme.
  This means that the screen will lock if set to "Lock screen" in
  gnome-screensaver when the lid is closed, or the system performs a 
suspend or
  hibernate action.

  There is a complex locking scheme available for power users that allows
  locking policy to change for the lid, suspend and hibernate actions.
  To enable this complex mode, you will have to disable the GConf key:"

So, everyone has a lid on their computer? :)

Should be changed to:
By default, GNOME Power Manager supports a simple locking scheme.
  This means that the screen will lock if set to "Lock screen when 
screensaver is active" in
  gnome-screensaver-preferences when the screensaver activates, the display 
is [blanked|turned off]
  by Ubuntu, the lid is closed, or the system performs a suspend or 
hibernate action.

  There is a complex locking scheme available for power users that allows 
the
  locking policy to change for display blanking, lid, suspend and hibernate 
actions.
  To enable this complex mode, you will have to disable the GConf key:

** Affects: ubuntu-docs (Ubuntu)
 Importance: Undecided
 Status: New

-- 
gpm manual is too vague and geared towards laptops
https://bugs.launchpad.net/bugs/390476
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 390459] Re: Sliders do not reset when screensaver is disabled

[Derek White]

After more research this is a UI bug.

In gconf, apps/gnome-power-manager/timeout reflects different values
than the UI shows.

On AC Power tab:
  actions shows 45 minutes, gconf shows 1200 seconds (20min)
  display shows 30 minutes, gconf shows 300 seconds (5min)
On UPS Power tab:
  actions slider shows 26 minutes (minimum it can go), gconf shows 60 seconds 
(1min)
  display shows 23 minutes, gconf shows 300 seconds - when I move slider gconf 
still says 300 seconds

-- 
Sliders do not reset when screensaver is disabled
https://bugs.launchpad.net/bugs/390459
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 390448] Re: [On UPS Power] Display sleep inactivity stuck.

[Derek White]

Checked gconf for more information:
Slider shows 23 minutes, gconf shows 300 seconds - when I move the slider gconf 
still says 300 seconds.

Bug 390459 might also give some more information.

-- 
[On UPS Power] Display sleep inactivity stuck.
https://bugs.launchpad.net/bugs/390448
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 390488] [NEW] gpm manual errors: 8.2 & 8.6

[Derek White]

Public bug reported:

Binary package hint: ubuntu-docs

8.2 - The caution/warning section
"You still use a small amount of battery power whilst suspended, so is not 
recommended for the low power action. If you remove AC power on a desktop, or 
run out of battery power on a laptop then you will lose your work."

Should be:
...so is not recommended for the low or critical power actions. ...

Reasoning: I shouldn't use it for low, but I can for critical? Clarity.


8.6 - Title
"Why does not my IBM laptop have the brightness sliders in Power Preferences?"

Should be:
Why doesn't Power Preferences show the brightness sliders for my IBM laptop?

Reasoning: The laptop doesn't "have" possession of the slider, power
prefs does. Furthermore, "why does not " is not correct grammar,
it is "why does  not"; however, when using it as a contraction it
is usually accepted, as in my correction.

Would also need changed in the index, at the top.

** Affects: ubuntu-docs (Ubuntu)
 Importance: Undecided
 Status: New

-- 
gpm manual errors: 8.2 & 8.6
https://bugs.launchpad.net/bugs/390488
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 390460] RE: [On UPS Power] Sleep inactivity cannot go lower than 26 minutes

[Derek White]

This seems to be a UI issue. Take a peek at Bug 390459, comment 1.

-- 
[On UPS Power] Sleep inactivity cannot go lower than 26 minutes
https://bugs.launchpad.net/bugs/390460
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 384622]

[Derek White]

So, is this a network manager problem? Does the package need changed over?
Or will it just go down as spam control not being implemented yet?

-- 
When a CDMA connection is established, the notify-osd bubble flashes several 
times before settling.
https://bugs.launchpad.net/bugs/384622
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 384635] Re: CDMA connection "Available to all users" will not "Disconnect".

[Derek White]

Does this need sent upstream?
Or, could it be something that Debian/Ubuntu does that's affecting the 
interaction?

** Summary changed:

- CMDA connection "Available to all users" will not "Disconnect".
+ CDMA connection "Available to all users" will not "Disconnect".

** Changed in: network-manager-applet (Ubuntu)
   Status: New => Confirmed

-- 
CDMA connection "Available to all users" will not "Disconnect".
https://bugs.launchpad.net/bugs/384635
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 384210] Re: gvfsd-archive should label the mounted iso with the embedded disc label, not the iso filename

[Derek White]

** Bug watch added: GNOME Bug Tracker #586592
   http://bugzilla.gnome.org/show_bug.cgi?id=586592

** Also affects: gvfs via
   http://bugzilla.gnome.org/show_bug.cgi?id=586592
   Importance: Unknown
   Status: Unknown

-- 
gvfsd-archive should label the mounted iso with the embedded disc label, not 
the iso filename
https://bugs.launchpad.net/bugs/384210
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 271246] Re: debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable

[Derek White]

After attempting upgrade today I had several errors with mysql, cups, and dpkg 
in general.
It all seems to be caused by the following error:

debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by
another process: Resource temporarily unavailable

I also noticed the same error in syslog (or .xsession-errors) earlier, while 
using startupmanager.
Upon opening synaptic:

E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to 
correct the problem. 
E: _cache->open() failed, please report.

Prior to doing that, the recommended 'fuser -v /var/cache/debconf/config.dat' 
returned nothing.
Returning to startupmanager...it seems that su-to-root (and other related 
programs) was active, running something that gave the following in my 
.xsession-errors log:
---
A new version of /boot/grub/menu.lst is available, but the version installed 
currently has been locally modified.

  1. install the package maintainer's version
  2. keep the local version currently installed
  3. show the differences between the versions
  4. show a side-by-side difference between the versions
  5. show a 3-way difference between available versions
  6. do a 3-way merge between available versions (experimental)
  7. start a new shell to examine the situation

What would you like to do about menu.lst? 
---

So, in my case, this was a startupmanager problem - it has no facility
to notify the user that this input is required...and waiting in a non-
existent terminal. I added this as a bug a while ago, but no one is
currently supporting startupmanager and the bug has gone without a fix.
I dunno, maybe it's a problem with 'sudo update-initramfs -u'? To
whomever this problem belongs, in my case initramfs noticed either the
menu.lst~ or the menu.lst.backup and wanted user input to decide whether
or not to update menu.lst - and startupmanager has no such facility to
let the user know.

Upon killing ucf, this showed up in my .xsession-errors:

/usr/sbin/update-grub: line 1036: 11220 Terminated  ucf
--debconf-ok --debconf-template grub/update_grub_changeprompt_threeway
--three-way "$buffer" $ucf_menu_file

So, maybe it's update-grub's fault? =)

Anyways, after killing ucf, 'sudo dpkg --configure -a' still didn't fix
the packages, so I found su-to-root still running and End'd it; but
still, update-grub & 'python /usr/sbin/startupmanager' (after attempting
an End) are in a Zombie state and cannot be End'd or Kill'd. Even 'su
kill -9' or -anything won't end them. ... OK, so 'sudo killall -g
update-grub' finally killed them all.

Then I ran 'sudo dpkg --configure -a' and it told me that mysql-
server-5.0 was in really bad shape and I should re-install it, the other
4-5 packages were configured OK. After a 'sudo apt-get install
--reinstall mysql-server-5.0 mysql-server' everything seems OK and the
'sudo dpkg --configure -a' returns cleanly. And, most importantly, my
LAMP server is functional again!

This may have been, and probably was, over-kill...but at least you know
this error can be over-come (without a logout or restart). It is also
not a bug of any one program, many different circumstances can cause
this "debconf: DbDriver"config":" error to rear its nasty head.

Final Note: The requested 'fuser' command never once showed anything, it
always returned cleanly. It does not appear to be a valid debug tool in
this case.

*** Firefox/Launchpad won't let me delete the attachment, so you guys
get to see my apt-get update terminal logs...how fun!

** Attachment added: "upgrade.txt"
   http://launchpadlibrarian.net/27480333/upgrade.txt

-- 
debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another 
process: Resource temporarily unavailable
https://bugs.launchpad.net/bugs/271246
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 213006] Re: [Hardy] startupmanager-1.9.10-2 hangs at "Performing post-configureation tasks"

[Derek White]

It happened again...See the following for detailed description:

https://bugs.launchpad.net/ubuntu/+source/fontconfig/+bug/271246/comments/7

Maybe update-grub doesn't like a menu.lst~ or a menu.lst.backup being in
/boot/grub?

After fixing the problems listed in bug 271246 and removing the 2 old
files, running startupmanager from a terminal window brings up the ASCI
window during "Performing pre-configuration tasks" and I selected to
keep the local version (I'm gonna redo it all anyways).

Did my stuff in sum, and during post-config, the ASCI window came up
again...selecting to view a 3-way difference shows the following:

5a
||| Older
kernel /vmlinuz-2.6.28-11-generic root=/dev/mapper/dereksbox-root ro
splash vga=795
===
kernel /vmlinuz-2.6.28-11-generic root=/dev/mapper/dereksbox-root ro
vga=795 splash
>>> New
.
4a
<<< Current
.

The only difference seems to be the order of vga= and splash... I
selected to install the package maintainer's version (sum's?) this time.

Complete terminal log:

de...@dereksbox:/boot/grub$ sudo startupmanager
Grub2 not detected
Version: ImageMagick 6.4.5 2009-01-22 Q16 OpenMP http://www.imagemagick.org
Copyright: Copyright (C) 1999-2008 ImageMagick Studio LLC

Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... found: 
/grub/splashimages/grub-fingerprint-0.11.xpm.gz

Found kernel: /vmlinuz-2.6.28-11-generic
Found kernel: /memtest86+.bin
Updating /boot/grub/menu.lst ... done

Grub Legacy detected
Usplash detected
Splashy not detected
Using '/usr/lib/usplash/usplash-theme-ubuntu.so' to provide 
'usplash-artwork.so'.
Using '/usr/lib/usplash/afisufi-high-tech-0.1-alpha-4.so' to provide 
'usplash-artwork.so'.
update-initramfs: Generating /boot/initrd.img-2.6.28-11-generic
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... found: 
/grub/splashimages/grub-fingerprint-0.11.xpm.gz

Found kernel: /vmlinuz-2.6.28-11-generic
Found kernel: /memtest86+.bin
Replacing config file /var/run/grub/menu.lst with new version
Updating /boot/grub/menu.lst ... done


Now 'ls /boot/grub | grep menu' shows:
menu.lst
menu.lst~
menu.lst.backup

They are back! Subsequent runs of sum go off without any problems. Hope
this helps some.

-- 
[Hardy] startupmanager-1.9.10-2 hangs at "Performing post-configureation tasks"
https://bugs.launchpad.net/bugs/213006
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 213006] Re: [Hardy] startupmanager-1.9.10-2 hangs at "Performing post-configureation tasks"

[Derek White]

Forgot to mention:

Ubuntu 9.04
sum 1.9.12-1
grub 0.97-29ubuntu53
initramfs-tools 0.92ubuntu29

-- 
[Hardy] startupmanager-1.9.10-2 hangs at "Performing post-configureation tasks"
https://bugs.launchpad.net/bugs/213006
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 372191] Re: Mounting certain iso/udf archives results in an added ; 1 to all filenames

[Derek White]

*** This bug is a duplicate of bug 299956 ***
https://bugs.launchpad.net/bugs/299956

I confirm as well on 9.04, happens with iso's created with DeVeDe and
various other iso's.

Right-click on iso and select 'Open with "Archive Mounter"'.
Confirm it does not effect directory names.

** This bug has been marked a duplicate of bug 299956
   Iso's don't mount correctly through 'archive mounter'

-- 
Mounting certain iso/udf archives results in an added ;1 to all filenames
https://bugs.launchpad.net/bugs/372191
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 299956] Re: Iso's don't mount correctly through 'archive mounter'

[Derek White]

I confirm as well on 9.04, happens with all iso's I have created with
DeVeDe and various other iso's.

Right-click on iso and select 'Open with "Archive Mounter"'.

>From OP: "Also the folders contained in the archive have no contents." -
no idea what this is, folders are fine for me, not even the ;1 on them,
the ;1 is only on files, folders are fine and can be opened fine with
their contents listed (albeit with the ;1).

-- 
Iso's don't mount correctly through 'archive mounter' 
https://bugs.launchpad.net/bugs/299956
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 384210] [NEW] gvfsd-archive should label the mounted iso with the embedded disc label, not the iso filename

[Derek White]

Public bug reported:

The ISO has the disc label stored inside it, why not use it?

Wish-list?
Upstream wish-list?

** Affects: ubuntu
 Importance: Undecided
 Status: New

** Description changed:

  The ISO has the disc label stored inside it, why not use it?
+ 
+ Wish-list?
+ Upstream wish-list?

-- 
gvfsd-archive should label the mounted iso with the embedded disc label, not 
the iso filename
https://bugs.launchpad.net/bugs/384210
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 299956] Re: Iso's don't mount correctly through 'archive mounter'

[Derek White]

Gnome Bug 562673 – gvfsd-archive mounts files with uppercase filename
Resolved by adding Joliet extension support to libarchive.

...

Why is that bug linked to this one?
Is the missing Joliet extension support also causing the addition of ;1 to 
filenames?
If not, can we remove the external bug watch?
If it is in fact correct, in which version of libarchive can we expect to see 
the fix? (Up-to-date Ubuntu 9.04 is using the libarchive1 package, version 
2.4.17-2.)

-- 
Iso's don't mount correctly through 'archive mounter' 
https://bugs.launchpad.net/bugs/299956
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 382636] Re: glxgears randomly reports vertical sync, but isn't sync'd

[Derek White]

Got more weird results today:

de...@dereksbox:~$ glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately 1/4 the monitor refresh rate.
7636 frames in 5.0 seconds = 1527.029 FPS
7814 frames in 5.0 seconds = 1562.751 FPS
7776 frames in 5.0 seconds = 1555.102 FPS
de...@dereksbox:~$ glxgears -sync
Usage:
  -display   set the display to run on
  -stereo run in stereo mode
  -fullscreen run in fullscreen mode
  -info   display OpenGL renderer info
  -geometry WxH+X+Y   window geometry
de...@dereksbox:~$ glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
7732 frames in 5.0 seconds = 1546.356 FPS
7817 frames in 5.0 seconds = 1563.353 FPS
7461 frames in 5.0 seconds = 1492.181 FPS


1/4 the monitor refresh rate now!

-- 
glxgears randomly reports vertical sync, but isn't sync'd
https://bugs.launchpad.net/bugs/382636
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 384622] [NEW] When a CDMA connection is established, the notify-osd bubble flashes several times before settling.

[Derek White]

Public bug reported:

Binary package hint: notify-osd

I have a Verizon Wireless Broadband USB727 Novatel Wireless 3G CDMA
modem. Everytime I click on its radio button in NetworkManager Applet
0.7.0.100 and the connection is established, the notify-osd bubble
flashes several times (half a dozen or so), then stays on for its normal
duration.

I have made no changes to the connection (as this breaks the Disconnect
radio button, another bug report to follow); so, everything is at
default. Plug the card into a USB slot, let nm auto create the
connection, left-click on nm-applet, click the "Auto Mobile Broadband
(CDMA) connection" radio button, and allow it to connect; then, watch
the notify-osd bubble as it flashes several times prior to settling down
and displaying normally for the duration of its screen time.

+ I am using metacity - no fancy anything.

ProblemType: Bug
Architecture: i386
DistroRelease: Ubuntu 9.04
Package: notify-osd 0.9.11-0ubuntu3
ProcEnviron:
 PATH=(custom, user)
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: notify-osd
Uname: Linux 2.6.28-11-generic i686

** Affects: notify-osd (Ubuntu)
 Importance: Undecided
 Status: New

-- 
When a CDMA connection is established, the notify-osd bubble flashes several 
times before settling.
https://bugs.launchpad.net/bugs/384622
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 384622] Re: When a CDMA connection is established, the notify-osd bubble flashes several times before settling.

[Derek White]

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/27628937/Dependencies.txt

** Description changed:

  Binary package hint: notify-osd
  
  I have a Verizon Wireless Broadband USB727 Novatel Wireless 3G CDMA
  modem. Everytime I click on its radio button in NetworkManager Applet
  0.7.0.100 and the connection is established, the notify-osd bubble
  flashes several times (half a dozen or so), then stays on for its normal
  duration.
  
  I have made no changes to the connection (as this breaks the Disconnect
  radio button, another bug report to follow); so, everything is at
  default. Plug the card into a USB slot, let nm auto create the
  connection, left-click on nm-applet, click the "Auto Mobile Broadband
  (CDMA) connection" radio button, and allow it to connect; then, watch
  the notify-osd bubble as it flashes several times prior to settling down
  and displaying normally for the duration of its screen time.
  
+ + I am using metacity - no fancy anything.
+ 
  ProblemType: Bug
  Architecture: i386
  DistroRelease: Ubuntu 9.04
  Package: notify-osd 0.9.11-0ubuntu3
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: notify-osd
  Uname: Linux 2.6.28-11-generic i686

** Tags removed: apport-bug i386

-- 
When a CDMA connection is established, the notify-osd bubble flashes several 
times before settling.
https://bugs.launchpad.net/bugs/384622
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 384635] [NEW] CMDA connection "Available to all users" will not "Disconnect".

[Derek White]

Public bug reported:

Adapter: Verizon Broadband USB727 by Novatel Wireless 3G CDMA

This should cover all circumstances:
1) Remove card from USB port (nm should disconnect automatically).
2) Right-click nm-applet & select "Edit Connections..."
3) Select "Mobile Broadband" tab and delete entry (or entries).
4) Close "Network Connections" window.
5) Insert broadband card.
6) Once the device becomes 'managed', left-clicking the nm-applet shows that a 
new connection has appeared - "Auto Mobile Broadband (CDMA) connection".
7) Click on it and you will connect.
8) Left-click on nm-applet again, and you see the Disconnect entry. Click that, 
and you will be disconnected.
[The remaining steps can be done on or off-line, it doesn't matter. I 
reconnected first.]
9) Right-click nm-applet & select "Edit Connections...", then select the 
"Mobile Broadband" tab.
10) Select the "Auto ... (CDMA) connection" and click the Edit button.
11) Make the connection "Available to all users" and click Apply (type in your 
password if needed for system policy, letting it remember doesn't effect the 
bug).
Note: Changing this setting (in any way) WILL result in nm killing the 
connection, forcing you to manually re-enable it. [Another bug?]
12) Close "Network Connections" window.
13) Left-click the nm-applet & select Disconnect.

You are still connected, there is no notify-osd bubble, nothing happens. To 
disconnect, you have to disable networking, then re-enable networking 
(right-click on nm-applet - the only check-box).
No logs go bold in log viewer, so it doesn't seem like anything is a happening 
at all.
If I remove the "Available to all users" check-box, the connection is killed, I 
re-enable it, and "Disconnect" works again.

ProblemType: Bug
Architecture: i386
DistroRelease: Ubuntu 9.04
ExecutablePath: /usr/bin/nm-applet
Package: network-manager-gnome 0.7.1~rc4.1-0ubuntu2
ProcEnviron:
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: network-manager-applet
Uname: Linux 2.6.28-11-generic i686
WpaSupplicantLog:

** Affects: network-manager-applet (Ubuntu)
 Importance: Undecided
 Status: New

-- 
CMDA connection "Available to all users" will not "Disconnect".
https://bugs.launchpad.net/bugs/384635
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 384635] Re: CMDA connection "Available to all users" will not "Disconnect".

[Derek White]

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/27629366/Dependencies.txt

** Attachment added: "Gconf.txt"
   http://launchpadlibrarian.net/27629367/Gconf.txt

** Attachment added: "IfupdownConfig.txt"
   http://launchpadlibrarian.net/27629368/IfupdownConfig.txt

** Attachment added: "NetDevice.eth0.txt"
   http://launchpadlibrarian.net/27629369/NetDevice.eth0.txt

** Attachment added: "NetDevice.lo.txt"
   http://launchpadlibrarian.net/27629370/NetDevice.lo.txt

** Attachment added: "NetDevice.ppp0.txt"
   http://launchpadlibrarian.net/27629371/NetDevice.ppp0.txt

** Attachment added: "NetDevice.vboxnet0.txt"
   http://launchpadlibrarian.net/27629372/NetDevice.vboxnet0.txt

** Attachment added: "ProcMaps.txt"
   http://launchpadlibrarian.net/27629373/ProcMaps.txt

** Attachment added: "ProcStatus.txt"
   http://launchpadlibrarian.net/27629374/ProcStatus.txt

** Attachment added: "Syslog.txt"
   http://launchpadlibrarian.net/27629375/Syslog.txt

-- 
CMDA connection "Available to all users" will not "Disconnect".
https://bugs.launchpad.net/bugs/384635
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 384636] [NEW] CDMA connection manually "Disconnect"ed will not "Connect automatically" when device is re-inserted.

[Derek White]

Public bug reported:

1) Have a Mobile Broadband connection, with the "Connect automatically" 
check-box checked. (Under Edit Connections)
2) Manually disconnect the connection by left-clicking nm-applet and selecting 
"Disconnect".
3) Remove the device from the USB port.
4) Re-insert the device.
5) nm does not reconnect the connection.

Adapter: Verizon Wireless Broadband USB727 (Novatel Wireless) 3G CDMA

** Affects: network-manager-applet (Ubuntu)
 Importance: Undecided
 Status: New

-- 
CDMA connection manually "Disconnect"ed will not "Connect automatically" when 
device is re-inserted.
https://bugs.launchpad.net/bugs/384636
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 384642] [NEW] "Connect automatically" CDMA connection displays incorrect nm-applet icon & notify-osd messages when manually disconnected.

[Derek White]

Public bug reported:

1) Have a CDMA connection with "Connect automatically" checked in Edit 
Connections and be connected to it.
2) Left-click nm-applet and select Disconnect.

[This is just weird and should not be there.]
3) Immediately,  the nm-applet icon turns into the connecting icon (2 dark 
balls with blue comet-thing swirling clock-wise) and an icon-less notify-osd 
bubble comes up showing:
Network
Disconnected

[This is normal, ideal, and should stay.]
4) After some time, the nm-applet icon turns into the normal "Disconnected" 
icon and, at the same time, a second notify-osd bubble pops up with the normal 
icon and disconnected text:
Network
Disconnected - you are now offline

I don't know how much of the nm-applet icons are from my icon set, but I have:
Theme: DarkRoom
Icons: black-white 2 gloss (installed in 8.10 and preserved through the upgrade)

+ Added numbering to make the progression more noticeable.

** Affects: network-manager-applet (Ubuntu)
 Importance: Undecided
 Status: New

** Description changed:

  1) Have a CDMA connection with "Connect automatically" checked in Edit 
Connections and be connected to it.
  2) Left-click nm-applet and select Disconnect.
  
  [This is just weird and should not be there.]
- Immediately,  the nm-applet icon turns into the connecting icon (2 dark balls 
with blue comet-thing swirling clock-wise) and an icon-less notify-osd bubble 
comes up showing:
+ 3) Immediately,  the nm-applet icon turns into the connecting icon (2 dark 
balls with blue comet-thing swirling clock-wise) and an icon-less notify-osd 
bubble comes up showing:
  Network
  Disconnected
  
  [This is normal, ideal, and should stay.]
- After some time, the nm-applet icon turns into the normal "Disconnected" icon 
and, at the same time, a second notify-osd bubble pops up with the normal icon 
and disconnected text:
+ 4) After some time, the nm-applet icon turns into the normal "Disconnected" 
icon and, at the same time, a second notify-osd bubble pops up with the normal 
icon and disconnected text:
  Network
  Disconnected - you are now offline
  
  I don't know how much of the nm-applet icons are from my icon set, but I have:
  Theme: DarkRoom
  Icons: black-white 2 gloss (installed in 8.10 and preserved through the 
upgrade)
+ 
+ + Added numbering to make the progression more noticeable.

-- 
"Connect automatically" CDMA connection displays incorrect nm-applet icon & 
notify-osd messages when manually disconnected.
https://bugs.launchpad.net/bugs/384642
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 384636] Re: CDMA connection will not "Connect automatically" when device is re-inserted.

[Derek White]

** Summary changed:

- CDMA connection manually "Disconnect"ed will not "Connect automatically" when 
device is re-inserted.
+ CDMA connection will not "Connect automatically" when device is re-inserted.

** Description changed:

  1) Have a Mobile Broadband connection, with the "Connect automatically" 
check-box checked. (Under Edit Connections)
- 2) Manually disconnect the connection by left-clicking nm-applet and 
selecting "Disconnect".
+ 2) [Optional] Manually disconnect the connection by left-clicking nm-applet 
and selecting "Disconnect".
  3) Remove the device from the USB port.
- 4) Re-insert the device.
+ 4) Wait for nm to catch up and re-insert the device.
  5) nm does not reconnect the connection.
  
  Adapter: Verizon Wireless Broadband USB727 (Novatel Wireless) 3G CDMA

-- 
CDMA connection will not "Connect automatically" when device is re-inserted.
https://bugs.launchpad.net/bugs/384636
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 353921] Re: notification-daemon does not respect gconf preferences

[Derek White]

I confirm this is still an issue on Ubuntu 9.04, fully up-to-date.

This has been a problem since I upgraded from 8.10, why is it not
getting attention?

To re-iterate:
System > Preferences > Pop-Up Notifications does not do anything. The Theme nor 
the Position settings work. They do nothing, not even a mention of an error in 
any logs.

For me, a single display user, this is just annoying.
For others [see above], using multi-display, this is a show stopper!

Please, can it get some attention finally?

** Package changed: notification-daemon (Ubuntu) => notify-osd (Ubuntu)

** Changed in: notify-osd (Ubuntu)
   Status: New => Confirmed

-- 
notification-daemon does not respect gconf preferences
https://bugs.launchpad.net/bugs/353921
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 318990] Re: Please include fedora patch gtkpod-0.99.12-tooltips.patch

[Derek White]

Should the status on this be changed (across the board) to Fix Released?
It is fixed on Ubuntu 9.04 and was fixed/closed in the main gtkpod src
as of 1-17-09, refer to the SF bug link above.

-- 
Please include fedora patch gtkpod-0.99.12-tooltips.patch
https://bugs.launchpad.net/bugs/318990
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 300240] Re: gtkpod very slow after every click

[Derek White]

** Bug watch added: SourceForge.net Tracker #2793093
   http://sourceforge.net/support/tracker.php?aid=2793093

** Also affects: gtkpod via
   http://sourceforge.net/support/tracker.php?aid=2793093
   Importance: Unknown
   Status: Unknown

-- 
gtkpod very slow after every click
https://bugs.launchpad.net/bugs/300240
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 300240] Re: gtkpod very slow after every click

[Derek White]

Linked the upstream bug report.

For the non-svn patch that was submitted to gtkpod's sourceforge bug tracker, 
the direct d/l link is:
http://sourceforge.net/tracker/download.php?group_id=67873&atid=519275&file_id=327399&aid=2793093

It was originally a *.diff file. As the poster says: "I would have patch
current SVN, but this is currently not working for me."

If you get it to work (either from SVN or from the source/*.diff), I'd
recommend chiming in on SF and giving your comments.

-- 
gtkpod very slow after every click
https://bugs.launchpad.net/bugs/300240
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 261716] Re: window list goes blank with compiz

[Derek White]

This is still a problem in 9.04.
Still the same ways to fix: Cause a resize in the panel containing the Window 
List applet.

Is this an Ubuntu problem? If not, was it ever sent upstream?
Anyone hear of people in other distros having the same problem - that we can 
link our bug to?

Anything to help the progress along...

-- 
window list goes blank with compiz
https://bugs.launchpad.net/bugs/261716
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 392806] [NEW] Failure installing ccsm.

[Derek White]

Public bug reported:

Not sure which package to assign installation problems to. Failure
occurs with Synaptic, apt-get, and gdebi-gtk.

I tried using apport to report the error, but it told me that the
package was not a valid Ubuntu package...go figure.

Here is the terminal output by apt-get:
$ sudo apt-get install compizconfig-settings-manager
Reading package lists... Done
Building dependency tree   
Reading state information... Done
The following NEW packages will be installed:
  compizconfig-settings-manager
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 638kB of archives.
After this operation, 4166kB of additional disk space will be used.
Get:1 http://lug.mtu.edu jaunty/universe compizconfig-settings-manager 
0.8.2-0ubuntu1 [638kB]
Fetched 638kB in 17s (35.6kB/s)
(Reading database ... 147921 files and directories currently installed.)
Unpacking compizconfig-settings-manager (from 
.../compizconfig-settings-manager_0.8.2-0ubuntu1_all.deb) ...
Inconsistency detected by ld.so: dynamic-link.h: 185: elf_get_dynamic_info: 
Assertion `info[20]->d_un.d_val == 17 || info[20]->d_un.d_val == 7' failed!
dpkg: error processing 
/var/cache/apt/archives/compizconfig-settings-manager_0.8.2-0ubuntu1_all.deb 
(--unpack):
 subprocess pre-installation script returned error exit status 127
Errors were encountered while processing:
 /var/cache/apt/archives/compizconfig-settings-manager_0.8.2-0ubuntu1_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

I will attach either a Synaptic or apt-get *.crash report, if requested.

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
Failure installing ccsm.
https://bugs.launchpad.net/bugs/392806
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 392806] Re: Failure installing ccsm.

[Derek White]

Very strange...

Same error occurs when I start apache2:
sudo /etc/init.d/apache2 start
 * Starting web server apache2
Inconsistency detected by ld.so: dynamic-link.h: 185: elf_get_dynamic_info: 
Assertion `info[20]->d_un.d_val == 17 || info[20]->d_un.d_val == 7' failed!
 [ OK ]

Server starts up fine and works fine (apparently).

-- 
Failure installing ccsm.
https://bugs.launchpad.net/bugs/392806
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 392806] Re: Failure installing ccsm.

[Derek White]

I restarted the computer and the error(s) went away...go figure.

** Changed in: ubuntu
   Status: New => Invalid

-- 
Failure installing ccsm.
https://bugs.launchpad.net/bugs/392806
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393248] [NEW] Failed to parse '/usr/share/mime/packages/audacity.xml'

[Derek White]

Public bug reported:

Binary package hint: audacity

Processing triggers for shared-mime-info ...
I/O warning : failed to load external entity 
"/usr/share/mime/packages/audacity.xml"
Failed to parse '/usr/share/mime/packages/audacity.xml'

Happens every time I install a package that processes triggers for
shared-mime-info.

** Affects: audacity (Ubuntu)
 Importance: Undecided
 Status: New

-- 
Failed to parse '/usr/share/mime/packages/audacity.xml'
https://bugs.launchpad.net/bugs/393248
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 154734] Re: No window snapping while resizing windows

[Derek White]

Going on two years and this just got triaged...wtg!

Who is working on it? Is it upstream? Can we get a link to the upstream
bug? Will it be fixed for Karmic? Will it be backported to Jaunty?

Concern: I am concerned that the snapping will not work properly with
gnome-panel. Will it snap to the panel, the screen edge, both? If both,
how will it work with a small panel size, such as 10px? I just don't
want it to be fudged like when moving a window and having it freak
out/get stuck on the screen edge when the user wants it to snap to the
panel.

-- 
No window snapping while resizing windows
https://bugs.launchpad.net/bugs/154734
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393272] [NEW] Moving a window does not work as expected.

[Derek White]

Public bug reported:

Binary package hint: compiz

1] A window will not snap off the bottom screen edge without disabling
wobbly windows by holding the Shift key. In the screen-shot, I used Alt-
Mouse1 to initiate a window move near the bottom of the firefox window.
As you can see, I dragged the mouse (mouse is actually in the move icon,
but screen-shot doesn't show it) about half-way up the screen, and the
window did not budge - just some stretching from the wobbly window plug-
in.

2] A window may be moved below the bottom screen edge, but it cannot
move above the top gnome-panel (or upper screen edge, if no top panel
exists).

3] If this has to do with the resistance/attraction setting, then I
believe the default should be switched from resistance to attraction, as
it works MUCH better and more intuitively - although any selection makes
very little difference in functionality.

4] The tool-tips should be updated as they are completely useless. If
someone does not know what attraction/resistance are or how changing the
px distance will effect them, then the current tool-tips are meaningless
and make moving/snapping windows not work as the user expects.

If it affects snapping/wobbling...my upper panel is 32px and bottom
panel is 28px.

gconftool-2 -g /apps/compiz/general/allscreens/options/active_plugins
[core,mousepoll,workarounds,dbus,png,text,video,regex,shift,vpswitch,place, 
session,neg,resize,gnomecompat,commands,imgjpeg,svg,thumbnail,resizeinfo, 
decoration,snap,animation,wobbly,fade,move,cube,3d,rotate,cubeaddon,expo,ezoom,switcher]

** Affects: compiz (Ubuntu)
 Importance: Undecided
 Status: New

-- 
Moving a window does not work as expected.
https://bugs.launchpad.net/bugs/393272
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393272] Re: Moving a window does not work as expected.

[Derek White]

** Attachment added: "compiz-window-move.png"
   http://launchpadlibrarian.net/28492931/compiz-window-move.png

-- 
Moving a window does not work as expected.
https://bugs.launchpad.net/bugs/393272
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393275] [NEW] Cannot take screenshot while holding down Shift and moving window.

[Derek White]

Public bug reported:

Binary package hint: gnome-utils

I was trying to take screen-shots to report a few bugs in compiz related
to moving windows.

I held down Shift, then clicked the title bar of a window to move it.
While still holding down shift and mouse1, when I hit the PrtScrn button
nothing happened.

I expected a screen-shot to be taken.

** Affects: gnome-utils (Ubuntu)
 Importance: Undecided
 Status: New

-- 
Cannot take screenshot while holding down Shift and moving window.
https://bugs.launchpad.net/bugs/393275
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393275] Re: Cannot take screenshot while holding down Shift and moving window.

[Derek White]

Shift-Mouse1 is a keyboard shortcut in itself. Any extra key presses
should not be treated as keyboard shortcuts in addition to any keys held
down for the one that is active.

This bug is because it thinks I am hitting Shift+PrtScrn, which is not a
shortcut - but potentially is one. So, it thinks it is one and has no
action associated with it - resulting in nothing happening.

Again, if a shortcut has already been hit, and is still active, a second
shortcut should be allowed without interfering with the first one. Hard
to explain - hope you understand.

P.S. I don't know which package handles shortcuts, so I put this under
gnome-utils.

-- 
Cannot take screenshot while holding down Shift and moving window.
https://bugs.launchpad.net/bugs/393275
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393278] Re: Keyboard activated resize causes artifacts in resize-info.

[Derek White]

** Attachment added: "resize-info-artifacts.png"
   http://launchpadlibrarian.net/28493186/resize-info-artifacts.png

-- 
Keyboard activated resize causes artifacts in resize-info.
https://bugs.launchpad.net/bugs/393278
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393278] [NEW] Keyboard activated resize causes artifacts in resize-info.

[Derek White]

Public bug reported:

Binary package hint: compiz

Active window resize via keyboard. Alt+space > R
Hit left/right/up/down key 2 times to resize window in that direction once. 
(up/down takes 3-4 presses to reproduce artifact)
Artifact will be a "left-over" from the resize info box.

See attached screen-shot extract for artifact generated by resizing to
the right.

** Affects: compiz (Ubuntu)
 Importance: Undecided
 Status: New

-- 
Keyboard activated resize causes artifacts in resize-info.
https://bugs.launchpad.net/bugs/393278
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393284] [NEW] Cannot take a screen-shot when menu bar is open.

[Derek White]

Public bug reported:

Binary package hint: gnome-utils

Alt-F1 (or click on Applications/Places/System)
Hit PrtScrn

Nothing happens.

Expect: Screen-shot to be taken.

This effectively makes it impossible to take a screen-shot of the menu.

** Affects: gnome-utils (Ubuntu)
 Importance: Undecided
 Status: New

-- 
Cannot take a screen-shot when menu bar is open.
https://bugs.launchpad.net/bugs/393284
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393285] [NEW] Keyboard LEDs are improplery lit when resuming from suspend.

[Derek White]

Public bug reported:

Every time my computer resumes from standby, my Scroll Lock LED is lit.

To remove the lit LED I have to hit a key that toggles another LED, such as 
Caps Lock.
I suppose hitting Scroll Lock would work, but my Scroll Lock key doesn't work - 
anytime.

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
Keyboard LEDs are improplery lit when resuming from suspend.
https://bugs.launchpad.net/bugs/393285
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 59417] Re: Scroll lock does not work in X

[Derek White]

I can confirm all problem-related comments in Jaunty.

xev shows the button press, mod3 is blank, "xmodmap -e 'add mod3 =
Scroll_Lock'" works for current session. I have not applied it to
.Xmodmap/.xmodmap yet, as there are conflicting results as to where to
put it and whether it works.

If it's related, see Bug 393285.

Keyboard: Saitek Eclipse Model # KU-0418, Assembly # KU-0573.

-- 
Scroll lock does not work in X
https://bugs.launchpad.net/bugs/59417
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393339] Re: Workspace Switcher functionality is lost after activating compiz.

[Derek White]

Note on Part 2: the tool tip says Desk 1 even when on desk 2/3/4/etc. I
may not have made that clear.

** Summary changed:

- Workspace Switcher functionality is lost after activating compiz.
+ Workspace Switcher tool tip issues after activating compiz.

-- 
Workspace Switcher tool tip issues after activating compiz.
https://bugs.launchpad.net/bugs/393339
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393339] [NEW] Workspace Switcher tool tip issues after activating compiz.

[Derek White]

Public bug reported:

A few tool tip problems. (workspace switcher applet, gnome panel, compiz
- I dunno)

1] "Click to start dragging " shows up, but drag'n'drop
does not work with compiz. This tool tip should be removed, or the
functionality should be added.

2] When using metacity, hovering over a non-active workspace/veiwport
shows "Switch to Desk 1/2/3/4/etc". When using compiz, all non-current
workspaces show "Current workspace: "Desk 1"". A) Accepted functionality
is lost. B) Shouldn't it be viewport, not workspace for compiz. ;)

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
Workspace Switcher tool tip issues after activating compiz.
https://bugs.launchpad.net/bugs/393339
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393341] [NEW] Resize Info does not show proper window size.

[Derek White]

Public bug reported:

Binary package hint: compiz

Screen is 900px tall, top panel is 32px, bottom panel is 28 pixels.

Window, when resized to fit between the two panel shows height of
~809px.

900 - 32 - 28 = 840 != 809

This [combined with the fact that resize doesn't snap] makes it very
difficult to size a window to fit between the panels without "wobble
room".

** Affects: compiz (Ubuntu)
 Importance: Undecided
 Status: New

-- 
Resize Info does not show proper window size.
https://bugs.launchpad.net/bugs/393341
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393346] Re: Mounted CD/DVD media is shown improperly after resuming from suspend.

[Derek White]

** Attachment added: "Screenshot-Computer.png"
   http://launchpadlibrarian.net/28498710/Screenshot-Computer.png

-- 
Mounted CD/DVD media is shown improperly after resuming from suspend.
https://bugs.launchpad.net/bugs/393346
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393346] [NEW] Mounted CD/DVD media is shown improperly after resuming from suspend.

[Derek White]

Public bug reported:

1) Insert media into CD/DVD drive & let it mount.
2) Activate a suspend. (Have not tried with Hibernate.)
3) Resume the computer.
4) Check Places or Computer (file manager). You will see two (2) entries for 
the mounted media. One has the default empty/non-mounted icon, the other has 
the disc/mounted icon. [See attached screen-shot.]

Only the entry with the disc icon will work as expected.
Double clicking on the drive icon has no effect.
Right clicking on the disc icon entry shows "Unmount Volume".
Right clicking on the drive icon entry shows "Mount Volume" & "Eject Volume".

To return it to normal operation, select Unmount Volume on the disc icon
entry and it will unmount the volume and the disc icon entry will
disappear. Full, normal functionality is returned to the drive icon and
a subsequent Mount Volume replaces the drive icon with the disc icon, as
usual.

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
Mounted CD/DVD media is shown improperly after resuming from suspend.
https://bugs.launchpad.net/bugs/393346
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393346] Re: Mounted CD/DVD media is shown improperly after resuming from suspend.

[Derek White]

This bug may be related to Bug 345911.

-- 
Mounted CD/DVD media is shown improperly after resuming from suspend.
https://bugs.launchpad.net/bugs/393346
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393284] Re: Keyboard shortcuts do not work when menu bar is open.

[Derek White]

*** This bug is a duplicate of bug 29894 ***
https://bugs.launchpad.net/bugs/29894

** Summary changed:

- Cannot take a screen-shot when menu bar is open.
+ Keyboard shortcuts do not work when menu bar is open.

-- 
Keyboard shortcuts do not work when menu bar is open.
https://bugs.launchpad.net/bugs/393284
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 29894] Re: can't take screenshot when menu on panel is opened

[Derek White]

Correction: NO keyboard shortcuts work when the menu is open, not just
Print Screen. Description update needed?

-- 
can't take screenshot when menu on panel is opened
https://bugs.launchpad.net/bugs/29894
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 29894] Re: can't take screenshot when menu on panel is opened

[Derek White]

Something interesting that I found...

One thing that does work:
Open Firefox, Hit Alt-F (To open file menu), then hit Alt-Tab.
As soon as Alt is hit, the menu closes so the following -Tab, -E, -V, etc. 
still work.

I assume this is a work-around that Firefox programmed in? Why can't
that also be added in for all GTK+ programs? If a menu is open, and the
Alt key is pressed/held down, the menu exits. Sounds simple :)

-- 
can't take screenshot when menu on panel is opened
https://bugs.launchpad.net/bugs/29894
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393275] Re: Cannot take screenshot while holding down Shift and moving window.

[Derek White]

So, basically, it is impossible to hit any key[e.g. PrtScrn] while
holding down any shortcut[e.g. Shift+Mouse1]? Sounds reasonable...

-- 
Cannot take screenshot while holding down Shift and moving window.
https://bugs.launchpad.net/bugs/393275
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 394082] [NEW] Shortcut interference in menu.

[Derek White]

Public bug reported:

1] Hold Alt+Mouse1|2|3|etc. (To move or resize window - not to open app menu.)
2] While moving/resizing window (with or without letting go of Alt) hit F1 (or 
Alt-F1 if you let go).
3] Notice Applications menu option is highlighted but the menu does not come 
down.
4] Stop moving/resizing window.
5] Hit Alt-F1.

Expect: Menu should come up.
Happens instead: Menu does not come up.

Clicking on the desktop or on the window that was moved does not fix the
menu. To use the menu shortcut again (and remove the highlight), you
have to hover the mouse over it (pulling down the menu) and click off,
or switch to a second open window, or open a new window. Normal Alt-F1
functionality is then restored.

Two shortcuts should not be able to be activated at the same time
(according to numerous 'invalid' bugs); however, for some reason this
one is allowed and causes the menu to temporarily "break".

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
Shortcut interference in menu.
https://bugs.launchpad.net/bugs/394082
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 394082] Re: Shortcut interference in menu.

[Derek White]

Clicking on a panel (any panel) also removes the highlight and returns
Alt-F1 shortcut functionality.

-- 
Shortcut interference in menu.
https://bugs.launchpad.net/bugs/394082
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 394082] Re: Shortcut interference in menu.

[Derek White]

Correction: Switching to a second window does not fix it. Only clicking
on a panel, hovering over the menu, or clicking on a newly opened window
(e.g. Alt-F2 for the Run dialog and then clicking the dialog). Having
the new window grab focus is not enough, the new window must be clicked
on.

-- 
Shortcut interference in menu.
https://bugs.launchpad.net/bugs/394082
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393248] Re: Failed to parse '/usr/share/mime/packages/audacity.xml'

[Derek White]

I did think of doing a re-install and performed it, but have not had a
chance to test whether or not that fixed it. I have no major program
updates to do and I am on a metered Internet plan, so no nilly-willy
installing for me! I will post back if I notice it anymore.

-- 
Failed to parse '/usr/share/mime/packages/audacity.xml'
https://bugs.launchpad.net/bugs/393248
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 382636] [NEW] glxgears randomly reports vertical sync, but isn't sync'd

[Derek White]

Public bug reported:

This just started out of nowhere, very weird...

**
de...@dereksbox:~$ date
Tue Jun  2 01:31:08 EDT 2009
de...@dereksbox:~$ cat /etc/X11/xorg.conf

de...@dereksbox:~$ glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
de...@dereksbox:~$ glxgears
7438 frames in 5.0 seconds = 1487.485 FPS
de...@dereksbox:~$ cat /etc/X11/xorg.conf

de...@dereksbox:~$ date
Tue Jun  2 01:31:28 EDT 2009
de...@dereksbox:~$ glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
7549 frames in 5.0 seconds = 1509.673 FPS
7578 frames in 5.0 seconds = 1515.598 FPS
7662 frames in 5.0 seconds = 1532.291 FPS
de...@dereksbox:~$ glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
7511 frames in 5.0 seconds = 1502.188 FPS
7611 frames in 5.0 seconds = 1522.030 FPS
de...@dereksbox:~$ ubuntu-bug
Usage: /usr/bin/ubuntu-bug |||<.crash file>
de...@dereksbox:~$ whereis glxgears
glxgears: /usr/bin/glxgears /usr/share/man/man1/glxgears.1.gz
de...@dereksbox:~$ ubuntu-bug /usr/bin/glxgears
de...@dereksbox:~$ date
Tue Jun  2 01:37:19 EDT 2009
de...@dereksbox:~$ glxgears
7510 frames in 5.0 seconds = 1501.818 FPS
6711 frames in 5.0 seconds = 1342.109 FPS
de...@dereksbox:~$ glxgears
7470 frames in 5.0 seconds = 1493.899 FPS
de...@dereksbox:~$ glxgears
de...@dereksbox:~$ glxgears
de...@dereksbox:~$ glxgears
7697 frames in 5.0 seconds = 1539.268 FPS
**

Seemingly goes away...Then, I do a '$ clear'

**
de...@dereksbox:~$ glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
6963 frames in 5.0 seconds = 1392.431 FPS
7610 frames in 5.0 seconds = 1521.945 FPS
de...@dereksbox:~$ date
Tue Jun  2 01:38:54 EDT 2009
de...@dereksbox:~$ glxgears
7499 frames in 5.0 seconds = 1499.638 FPS
de...@dereksbox:~$ glxgears
7439 frames in 5.0 seconds = 1487.707 FPS
7663 frames in 5.0 seconds = 1532.571 FPS
**

And, it came back for a while.

**
de...@dereksbox:~$ glxgears
7431 frames in 5.0 seconds = 1486.017 FPS
de...@dereksbox:~$ glxgears
de...@dereksbox:~$ glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
de...@dereksbox:~$ date
Tue Jun  2 01:42:03 EDT 2009
**

Above, I canceled the second run very quickly, hit the up arrow>enter to
re-run it very quickly, and it came back...

This is just weird. As you can see from my first excerpt, my xorg.conf is empty.
My refresh rate is obviously not 1500+Hz, it's the default for my DVI monitor, 
60Hz.

Reproducibility? Not sure how I reproduced it, just did it a bunch and
the warning comes up occasionally.

Good luck with this one,
-Derek

PS - Second bug(?) - Firefox seems to think 'framerate' is not a correct
word... :)

ProblemType: Bug
Architecture: i386
DistroRelease: Ubuntu 9.04
Package: mesa-utils 7.4-0ubuntu3.1
ProcEnviron:
 PATH=(custom, user)
 LANG=en_US.UTF-8
 SHELL=/bin/bash
ProcVersion: Linux version 2.6.28-11-generic (bui...@palmer) (gcc version 4.3.3 
(Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009
SourcePackage: mesa
Uname: Linux 2.6.28-11-generic i686
XorgConf:

** Affects: mesa (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug i386

-- 
glxgears randomly reports vertical sync, but isn't sync'd
https://bugs.launchpad.net/bugs/382636
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 382636] Re: glxgears randomly reports vertical sync, but isn't sync'd

[Derek White]

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/27397286/Dependencies.txt

** Attachment added: "LsHal.txt"
   http://launchpadlibrarian.net/27397287/LsHal.txt

** Attachment added: "LsMod.txt"
   http://launchpadlibrarian.net/27397288/LsMod.txt

** Attachment added: "LsPci.txt"
   http://launchpadlibrarian.net/27397289/LsPci.txt

** Attachment added: "XorgLog.txt"
   http://launchpadlibrarian.net/27397290/XorgLog.txt

** Attachment added: "XorgLogOld.txt"
   http://launchpadlibrarian.net/27397291/XorgLogOld.txt

** Attachment added: "Xrandr.txt"
   http://launchpadlibrarian.net/27397292/Xrandr.txt

** Attachment added: "glxinfo.txt"
   http://launchpadlibrarian.net/27397293/glxinfo.txt

** Attachment added: "monitors.xml.txt"
   http://launchpadlibrarian.net/27397294/monitors.xml.txt

** Attachment added: "setxkbmap.txt"
   http://launchpadlibrarian.net/27397295/setxkbmap.txt

** Attachment added: "system.txt"
   http://launchpadlibrarian.net/27397296/system.txt

** Attachment added: "xdpyinfo.txt"
   http://launchpadlibrarian.net/27397297/xdpyinfo.txt

** Attachment added: "xkbcomp.txt"
   http://launchpadlibrarian.net/27397298/xkbcomp.txt

-- 
glxgears randomly reports vertical sync, but isn't sync'd
https://bugs.launchpad.net/bugs/382636
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 393248] Re: Failed to parse '/usr/share/mime/packages/audacity.xml'

[Derek White]

This is after a re-install of audacity...you're not going to like it...
$ cat /usr/share/mime/packages/audacity.xml
cat: /usr/share/mime/packages/audacity.xml: Input/output error

$ gedit /usr/share/mime/packages/audacity.xml
** (gedit:29153): WARNING **: Hit unhandled case 0 (Input/output error)
in parse_error.

And vim thought it was a new file...

So, I assume the error will still be there when I do have an update to
perform...
Not sure what else I can do to help you. It may be a hdd problem. I will
do some disk maintenance over-night and try it again in the morning.
Will post back.

-- 
Failed to parse '/usr/share/mime/packages/audacity.xml'
https://bugs.launchpad.net/bugs/393248
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 394935] [NEW] package python-gnome2 2.26.1-0ubuntu1 failed to install/upgrade: trying to overwrite `/usr/lib/gnome-vfs-2.0/modules', which is also in package libgnomevfs2-extra

[Derek White]

Public bug reported:

lrwxrwxrwx 1 root  root  22 2009-04-22 02:38 #434283 ->
libpythonmethod-2.6.so

Showed up in my /lost+found after a fsck. Tried to reinstall the python-
gnome2 package and got this error.

Pop-up error dialog:
An error occured
The following details are provided:
E: /var/cache/apt/archives/python-gnome2_2.26.1-0ubuntu1_i386.deb: trying to 
overwrite `/usr/lib/gnome-vfs-2.0/modules', which is also in package 
libgnomevfs2-extra


/var/log/term.log shows:
(Reading database ... 147837 files and directories currently installed.)
Preparing to replace libgnomevfs2-common 1:2.24.1-0ubuntu1 (using 
.../libgnomevfs2-common_1%3a2.24.1-0ubuntu1_all.deb) ...
Unpacking replacement libgnomevfs2-common ...
Preparing to replace python-gnome2 2.26.1-0ubuntu1 (using 
.../python-gnome2_2.26.1-0ubuntu1_i386.deb) ...
Unpacking replacement python-gnome2 ...
dpkg: error processing 
/var/cache/apt/archives/python-gnome2_2.26.1-0ubuntu1_i386.deb (--unpack):
 trying to overwrite `/usr/lib/gnome-vfs-2.0/modules', which is also in package 
libgnomevfs2-extra
dpkg-deb: subprocess paste killed by signal (Broken pipe)
ln: accessing `/usr/lib/gnome-vfs-2.0/modules/libpythonmethod.so': Not a 
directory
dpkg: error while cleaning up:
 subprocess post-installation script returned error exit status 1
Processing triggers for python-support ...
Errors were encountered while processing:
 /var/cache/apt/archives/python-gnome2_2.26.1-0ubuntu1_i386.deb


The synaptic window shows a slightly different output, but alas I cannot copy 
it. [Thanks Ubuntu for that!]

ProblemType: Package
Architecture: i386
DistroRelease: Ubuntu 9.04
ErrorMessage: trying to overwrite `/usr/lib/gnome-vfs-2.0/modules', which is 
also in package libgnomevfs2-extra
Package: python-gnome2 2.26.1-0ubuntu1
SourcePackage: gnome-python
Title: package python-gnome2 2.26.1-0ubuntu1 failed to install/upgrade: trying 
to overwrite `/usr/lib/gnome-vfs-2.0/modules', which is also in package 
libgnomevfs2-extra
Uname: Linux 2.6.28-13-generic i686

** Affects: gnome-python (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-package i386

-- 
package python-gnome2 2.26.1-0ubuntu1 failed to install/upgrade: trying to 
overwrite `/usr/lib/gnome-vfs-2.0/modules', which is also in package 
libgnomevfs2-extra
https://bugs.launchpad.net/bugs/394935
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 394935] Re: package python-gnome2 2.26.1-0ubuntu1 failed to install/upgrade: trying to overwrite `/usr/lib/gnome-vfs-2.0/modules', which is also in package libgnomevfs2-extra

[Derek White]

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/28640483/Dependencies.txt

** Attachment added: "DpkgTerminalLog.txt"
   http://launchpadlibrarian.net/28640484/DpkgTerminalLog.txt

-- 
package python-gnome2 2.26.1-0ubuntu1 failed to install/upgrade: trying to 
overwrite `/usr/lib/gnome-vfs-2.0/modules', which is also in package 
libgnomevfs2-extra
https://bugs.launchpad.net/bugs/394935
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 173522] Re: Conky Staying On Top of All Windows

[Derek White]

I have been experiencing this problem since I activated compiz.

It starts after a restart (probably on login) and stays after
suspend/resume.

conky 1.6.1-0ubuntu4
See attached screen-shot.

** Attachment added: "Conky-Window.png"
   http://launchpadlibrarian.net/28642658/Conky-Window.png

-- 
Conky Staying On Top of All Windows
https://bugs.launchpad.net/bugs/173522
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 173522] Re: Conky Staying On Top of All Windows

[Derek White]

Worked perfectly fine under metacity.
Startup Applications command:
sh -c "sleep 20 && /home/derek/.bin/startup.sh"

Is this a problem with conky loading prior to compiz taking over
control? And, when it does take control, it adds the border shadow &
does not put it back how it should go.

-- 
Conky Staying On Top of All Windows
https://bugs.launchpad.net/bugs/173522
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 394987] Re: Pidgin shows incorrect AIM & ICQ server error messages.

[Derek White]

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/28645837/Dependencies.txt

** Attachment added: "ProcMaps.txt"
   http://launchpadlibrarian.net/28645838/ProcMaps.txt

** Attachment added: "ProcStatus.txt"
   http://launchpadlibrarian.net/28645839/ProcStatus.txt

** Visibility changed to: Private

-- 
Pidgin shows incorrect AIM & ICQ server error messages.
https://bugs.launchpad.net/bugs/394987
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 394987] [NEW] Pidgin shows incorrect AIM & ICQ server error messages.

[Derek White]

Private bug reported:

Binary package hint: pidgin

This has happened for as long as I've been using pidgin.
Using pidgin-developers PPA version of 2.5.8. (It's not my fault they don't 
update the Help > Report a problem link!)

Haven't connected to AIM or ICQ for over 18 hours and I receive the "You
have been connecting and disconnecting too frequently. Wait ten minutes
and try again. If you continue to try, you will need to wait even
longer." for both services. Using tor proxy. If I keep hitting re-
enable, after 3-10 times it finally connects; so, I am obviously not
getting the correct error message.

Debug window log:
(22:40:02) account: Connecting to account 1315740
(22:40:02) connection: Connecting. gc = 0xa6474a0
(22:40:02) oscar: registered module misc (family 0x, version = 0x, tool 
0x, tool version 0x)
(22:40:02) oscar: registered module oservice (family 0x0001, version = 0x0003, 
tool 0x0110, tool version 0x0629)
(22:40:02) oscar: registered module locate (family 0x0002, version = 0x0001, 
tool 0x0110, tool version 0x0629)
(22:40:02) oscar: registered module buddy (family 0x0003, version = 0x0001, 
tool 0x0110, tool version 0x0629)
(22:40:02) oscar: registered module messaging (family 0x0004, version = 0x0001, 
tool 0x0110, tool version 0x0629)
(22:40:02) oscar: registered module admin (family 0x0007, version = 0x0001, 
tool 0x0010, tool version 0x0629)
(22:40:02) oscar: registered module popup (family 0x0008, version = 0x0001, 
tool 0x0104, tool version 0x0001)
(22:40:02) oscar: registered module bos (family 0x0009, version = 0x0001, tool 
0x0110, tool version 0x0629)
(22:40:02) oscar: registered module userlookup (family 0x000a, version = 
0x0001, tool 0x0110, tool version 0x0629)
(22:40:02) oscar: registered module stats (family 0x000b, version = 0x0001, 
tool 0x0104, tool version 0x0001)
(22:40:02) oscar: registered module chatnav (family 0x000d, version = 0x0001, 
tool 0x0010, tool version 0x0629)
(22:40:02) oscar: registered module chat (family 0x000e, version = 0x0001, tool 
0x0010, tool version 0x0629)
(22:40:02) oscar: registered module odir (family 0x000f, version = 0x0001, tool 
0x0010, tool version 0x0629)
(22:40:03) oscar: registered module bart (family 0x0010, version = 0x0001, tool 
0x0010, tool version 0x0629)
(22:40:03) oscar: registered module feedbag (family 0x0013, version = 0x0004, 
tool 0x0110, tool version 0x0629)
(22:40:03) oscar: registered module icq (family 0x0015, version = 0x0001, tool 
0x0110, tool version 0x047c)
(22:40:03) oscar: registered module auth (family 0x0017, version = 0x, tool 
0x, tool version 0x)
(22:40:03) oscar: registered module alert (family 0x0018, version = 0x0001, 
tool 0x0010, tool version 0x0629)
(22:40:03) oscar: Adding handler for /0003
(22:40:03) oscar: Adding handler for /0006
(22:40:03) oscar: Adding handler for 0007/0003
(22:40:03) oscar: Adding handler for 0007/0005
(22:40:03) oscar: Adding handler for 0007/0007
(22:40:03) oscar: Adding handler for 0018/0001
(22:40:03) oscar: Adding handler for 0018/0007
(22:40:03) oscar: Adding handler for 0017/0003
(22:40:03) oscar: Adding handler for 0017/0007
(22:40:03) oscar: Adding handler for 0017/000a
(22:40:03) oscar: Adding handler for 0010/0005
(22:40:03) oscar: Adding handler for 0009/0001
(22:40:03) oscar: Adding handler for 0009/0003
(22:40:03) oscar: Adding handler for 0003/0001
(22:40:03) oscar: Adding handler for 0003/0003
(22:40:03) oscar: Adding handler for 0003/000b
(22:40:03) oscar: Adding handler for 0003/000c
(22:40:03) oscar: Adding handler for 000e/0001
(22:40:03) oscar: Adding handler for 000e/0003
(22:40:03) oscar: Adding handler for 000e/0004
(22:40:03) oscar: Adding handler for 000e/0002
(22:40:03) oscar: Adding handler for 000e/0006
(22:40:03) oscar: Adding handler for 000d/0001
(22:40:03) oscar: Adding handler for 000d/0009
(22:40:03) oscar: Adding handler for 0013/0001
(22:40:03) oscar: Adding handler for 0013/0003
(22:40:03) oscar: Adding handler for 0013/0006
(22:40:03) oscar: Adding handler for 0013/000e
(22:40:03) oscar: Adding handler for 0013/0008
(22:40:03) oscar: Adding handler for 0013/0009
(22:40:03) oscar: Adding handler for 0013/0015
(22:40:03) oscar: Adding handler for 0013/0019
(22:40:03) oscar: Adding handler for 0013/001b
(22:40:03) oscar: Adding handler for 0013/001c
(22:40:03) oscar: Adding handler for 0004/0007
(22:40:03) oscar: Adding handler for 0004/000a
(22:40:03) oscar: Adding handler for 0004/000b
(22:40:03) oscar: Adding handler for 0004/0001
(22:40:03) oscar: Adding handler for 0004/0014
(22:40:03) oscar: Adding handler for 0004/000c
(22:40:03) oscar: Adding handler for 0015/00f3
(22:40:03) oscar: Adding handler for 0015/00f2
(22:40:03) oscar: Adding handler for 0002/0003
(22:40:03) oscar: Adding handler for 0002/0006
(22:40:03) oscar: Adding handler for 0002/0001
(22:40:03) oscar: Adding handler for 0002/fffd
(22:40:03) oscar: Adding handler for 0001/0001
(22:40:03) oscar: Adding handler for 0001/000f
(22:40:

[Bug 394990] [NEW] Ekiga's window placement is not preserved after docking to notification area.

[Derek White]

Public bug reported:

Binary package hint: ekiga

1) Open ekiga
2) Close ekiga window (Ctrl+W or the X)
3) Show ekiga window

Expect window to come back where it left (snapped against my top panel).

What happens instead is that it is restored about 20-25 pixels lower &
~1-3 pixels to the right.

This happens every time the window is brought back up. Eventually ekiga
is stuck at the bottom of the screen. Once it hits the bottom, it
continues to move to the right slowly. Eventually it is in the bottom
right corner.

It never goes below the top of my bottom panel, nor does it ever go off
the right side of the screen. The entire window is always still visible.

ProblemType: Bug
Architecture: i386
DistroRelease: Ubuntu 9.04
ExecutablePath: /usr/bin/ekiga
Package: ekiga 3.2.0-0ubuntu2
ProcEnviron:
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: ekiga
Uname: Linux 2.6.28-13-generic i686

** Affects: ekiga (Ubuntu)
 Importance: Undecided
 Status: New

-- 
Ekiga's window placement is not preserved after docking to notification area.
https://bugs.launchpad.net/bugs/394990
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 394990] Re: Ekiga's window placement is not preserved after docking to notification area.

[Derek White]

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/28645958/Dependencies.txt

** Attachment added: "ProcMaps.txt"
   http://launchpadlibrarian.net/28645959/ProcMaps.txt

** Attachment added: "ProcStatus.txt"
   http://launchpadlibrarian.net/28645960/ProcStatus.txt

-- 
Ekiga's window placement is not preserved after docking to notification area.
https://bugs.launchpad.net/bugs/394990
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 318689] Re: gnome-system-log attempts to open bogus/inexistent logfiles

[Derek White]

Just noticed this problem after a "rm /var/log/*.gz" to clean up my log
directory...

I guess it's not going to be fixed until karmic?

** Attachment added: "Log-Deleted-Files.png"
   http://launchpadlibrarian.net/28646216/Log-Deleted-Files.png

-- 
gnome-system-log attempts to open bogus/inexistent logfiles
https://bugs.launchpad.net/bugs/318689
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 365314] [NEW] Spelling error in '/usr/bin/update-notifier --help' screen - "statup".

[Derek White]

Public bug reported:

Binary package hint: update-notifier

$ /usr/bin/update-notifier --help
[...]
  --startup-delayDelay statup by given amount of seconds
[...]

Should be "...Delay startup by..."

ProblemType: Bug
Architecture: i386
DistroRelease: Ubuntu 9.04
Package: update-notifier 0.76.7
ProcEnviron:
 PATH=(custom, user)
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: update-notifier
Uname: Linux 2.6.28-11-generic i686

** Affects: update-notifier (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug i386

-- 
Spelling error in '/usr/bin/update-notifier --help' screen - "statup".
https://bugs.launchpad.net/bugs/365314
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 365314] Re: Spelling error in '/usr/bin/update-notifier --help' screen - "statup".

[Derek White]

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/25865761/Dependencies.txt

-- 
Spelling error in '/usr/bin/update-notifier --help' screen - "statup".
https://bugs.launchpad.net/bugs/365314
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 327932] Re: News&Blogs Preview Pane - bgcolor & font color clash

[Derek White]

Assigned to nobody!

IMO it should be assigned to whoever left it out in the first place!
Even if they don't program anymore. :)

Seriously though, one little background/text combo got left behind and
no one is stepping up to fix it? Does everything with evolution need
upstreamed? Has this been upstreamed?

Is it fixed in 9.04 for final release?

-- 
News&Blogs Preview Pane - bgcolor & font color clash
https://bugs.launchpad.net/bugs/327932
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 293395] [NEW] Graphical artifacts present when resuming from sleep.

[Derek White]

Public bug reported:

No idea what is causing the problem, but when I resume from sleep
(gnome-power-preferences calls it sleep, but the power icon calls it
suspend...wtf???) ['S1&S3' selected in BIOS, computer completely off,
keyboard/mouse will not wake, have to use power button to resume - not
hibernation, hibernation is disabled, computer comes right up to locked
screen, no booting...no idea what to call this type] the upper & lower
gnome menus have artifacts around them, as well as any pop-up menus
(i.e. Applications, Places, right click on desktop/firefox/anywhere).
See attached picture.

Ubuntu 8.10 i386-generic
Default graphics drivers for ATI Radeon 9550 (RV350)
   xserver-xorg-video-radeon 1:6.9.0+git20082003.f9826a56-0ubuntu2
   $ lsmod | grep radeon
  radeon147616  2 
  drm86056  3 radeon
Default appearance settings (Visual Effects: Normal)
   compiz/compiz-core/compiz-gnome/compiz-plugins/compiz-wrapper -- 
1:0.7.8-0ubuntu4
   compizconfig-backend-gconf -- 0.7.8-0ubuntu1
   compiz-fusion-plugins-extra/compiz-fusion-plugins-main/libcompizconfig0 -- 
0.7.8-0ubuntu2
   $ pgrep comp
  16462 compiz
  16528 compiz.real
  16538 compiz-decorato
$ cat xorg.conf
$ [AKA: file exists, but is empty]

Artifacts can be removed immediately by logging out & back in.
Also can be removed by using the gnome menus (i.e. Applications/Places/System) 
over and over. (While writing this they disappeared.)

Not high priority, but very ugly and messy. Kinda seems like the
shadowing is all artifact-ed out.

Notes on the picture: The menu is usually visible on the top, the weird
static is a common ati gfx problem that occurred when I snapped the
picture. The problem I am reporting is the messed up border seen around
the bottom bar and around the top bar. I can get better picture if
needed, including the right-click menu and other menus.

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
Graphical artifacts present when resuming from sleep.
https://bugs.launchpad.net/bugs/293395
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 293395] Re: Graphical artifacts present when resuming from sleep.

[Derek White]

** Attachment added: "AfterSleep.jpg"
   http://launchpadlibrarian.net/19314319/AfterSleep.jpg

-- 
Graphical artifacts present when resuming from sleep.
https://bugs.launchpad.net/bugs/293395
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 275746] Re: Failed spamassassin pipe on Evolution (Intrepid)

[Derek White]

I can confirm this on a fresh install of 8.10. Ran evolution, imported
my old data/settings, exited, installed spamassassin and spamc, ran
evolution, activated spamassassin in Junk settings, error was present
immediately, still there after restarting evolution and the computer.

https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/281807 --
Comments 11 & 12

-- 
Failed spamassassin pipe on Evolution (Intrepid)
https://bugs.launchpad.net/bugs/275746
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 279806] Re: Gnome-System-Log window uses 100% cpu upon 'gksu moblock-control restart' with moblock.log in viewer.

[Derek White]

I apologize, I thought I closed this one out.

Turns out it was a performance issue. When 'moblock-control restart' is
run, it spits out a bunch of (in my mind) useless info to the log. This
sudden influx of data, caused the log viewer to "freeze" while it loads
the text into memory for viewing. I just didn't give it enough
time...chalk this one up to old hardware.

** Changed in: gnome-utils (Ubuntu)
 Assignee: Ubuntu Desktop Bugs (desktop-bugs) => (unassigned)
   Status: Incomplete => Invalid

-- 
Gnome-System-Log window uses 100% cpu upon 'gksu moblock-control restart' with 
moblock.log in viewer.
https://bugs.launchpad.net/bugs/279806
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 279774] Re: Firefox does not restore previous sessions' tabs when loading a URL from an application.

[Derek White]

I have done some more testing:

Opened firefox to my homepage.
I disabled Tor, restarted with the restart button that came up in the extension 
window.
Tested restore, didn't work: just came up to a single blank page, no tabs.
I opened a URL in a second tab (first was still blank).
I opened add-ons and disabled Ad-Block, restarted as it told me to.
It asked if I wanted to save my tabs, I said yes and it restarted.
My blank page & the second tab were restored perfectly.
Closed firefox.
Started firefox.
Went somewhere.
Opened a new tab & went somewhere else.
Closed firefox, selected save & quit.
Opened firefox.
I get a blank screen, nothing restored.

So, it seems that only when I save/restore from the restart button after
disabling an extension, will it save.

Under "Clear Private Data" I have browsing, download, saved form and
search histories checked, as well as cache, offline website data, and
authenticated sessions. It is set to clear all this when firefox closes.

I am at a total loss as to why this is happening.
Why does it ONLY save/restore successfully when I restart after disabling an 
extension?
Are saved tabs considered authenticated sessions?

** Summary changed:

- Firefox does not restore previous sessions' tabs when loading a URL from an 
application.
+ Firefox only restores previous session/tabs when restarting after disabling 
an extension.

** Description changed:

  Binary package hint: firefox-3.0
  
  firefox3.0.3+build1+nobinonly-0ubuntu0.8.04.1
  Ubuntu 8.04.1
  
  Closed down firefox with 2 tabs open by hitting the X and selecting save
  & quit.
  
  Clicked on a URL in an application (happened to be mobloquer).
  
  URL loads, old tabs are never restored.
  Reloading firefox does not load tabs either...tabs aren't even shown in the 
history.
  
  Torbutton does NOTHING to non-tor pages, which the saved tabs were.
+ 
  Tabs are saved and load just fine under ideal circumstances (i.e. close, 
save, reload - nothing fancy).
+ 
  
  Tabs aren't freakin' rocket science, why are there so many
  problems?! This is probably the 3rd bug I have found with tabs. And none
  of them get any attention at all. It almost makes me sad that I can't
  get IE on here to have something that actually works.
  
  Off topic: Why does launchpad store login info in cookies? I have never
  had to enter my password for this site since I created my account months
  ago. Kinda weird to have that lax of security on a Linux oriented
  site...
  
  ProblemType: Bug
  Architecture: i386
  Date: Tue Oct  7 14:24:54 2008
  DistroRelease: Ubuntu 8.04
  NonfreeKernelModules: fglrx
  Package: firefox-3.0 3.0.3+build1+nobinonly-0ubuntu0.8.04.1
  PackageArchitecture: i386
  ProcEnviron:
   PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: firefox-3.0
  Uname: Linux 2.6.24-19-generic i686

** Description changed:

  Binary package hint: firefox-3.0
  
  firefox3.0.3+build1+nobinonly-0ubuntu0.8.04.1
  Ubuntu 8.04.1
  
  Closed down firefox with 2 tabs open by hitting the X and selecting save
  & quit.
  
  Clicked on a URL in an application (happened to be mobloquer).
  
  URL loads, old tabs are never restored.
  Reloading firefox does not load tabs either...tabs aren't even shown in the 
history.
  
  Torbutton does NOTHING to non-tor pages, which the saved tabs were.
- 
- Tabs are saved and load just fine under ideal circumstances (i.e. close, 
save, reload - nothing fancy).
- 
+ Tabs are saved and load just fine under ideal circumstances (i.e. 
close, save, reload - nothing fancy).
  
- Tabs aren't freakin' rocket science, why are there so many
- problems?! This is probably the 3rd bug I have found with tabs. And none
- of them get any attention at all. It almost makes me sad that I can't
- get IE on here to have something that actually works.
- 
- Off topic: Why does launchpad store login info in cookies? I have never
- had to enter my password for this site since I created my account months
- ago. Kinda weird to have that lax of security on a Linux oriented
- site...
+ 
  
  ProblemType: Bug
  Architecture: i386
  Date: Tue Oct  7 14:24:54 2008
  DistroRelease: Ubuntu 8.04
  NonfreeKernelModules: fglrx
  Package: firefox-3.0 3.0.3+build1+nobinonly-0ubuntu0.8.04.1
  PackageArchitecture: i386
  ProcEnviron:
   PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: firefox-3.0
  Uname: Linux 2.6.24-19-generic i686

-- 
Firefox only restores previous session/tabs when restarting after disabling an 
extension.
https://bugs.launchpad.net/bugs/279774
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 279774] Re: Firefox only restores previous session/tabs when restarting after disabling an extension.

[Derek White]

Great, at least I know I'm not going crazy!

Now, this creates two problems:

1) My problem of losing saved tabs.

2) Firefox apparently does not clear private data when it restarts after 
disabling an extension.
a) This could be by design. AKA: a RESTART is not considered to be part of 
"when I close Firefox"?

Kenneth: Your fix would seem logical to me; hell, it's how I figured it
did it all along. I really didn't think the devs would make two features
that conflict like that without warning me.

So...where to go from here?

Bug?
or
Request a feature addition?

P.S. - Is this still a duplicate with the changes I made to it?

** Summary changed:

- Firefox only restores previous session/tabs when restarting after disabling 
an extension.
+ Firefox only restores previous session/tabs when restarting after disabling 
an extension, if Browsing History is cleared at close.

-- 
Firefox only restores previous session/tabs when restarting after disabling an 
extension, if Browsing History is cleared at close.
https://bugs.launchpad.net/bugs/279774
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 291901] [NEW] Fullscreen mode ignores customized toolbar settings.

[Derek White]

Public bug reported:

Binary package hint: evince

Before anyone screams duplicate, #148593
(https://bugs.launchpad.net/bugs/148593) is a subset of this bug; and,
the developers should have looked more closely, because that wasn't
really the problem. The problem is that NO customizations are carried
over to full screen mode, not just the singular case of 'no toolbar'.

1) Customize toolbar icons.
1.5) Optionally, restart evince. (Made no difference.)
2) Enter full screen mode.

What I expect:
   My customized toolbar is retained.

What happens instead:
   Default toolbar is displayed.

Thoughts:
   Maybe the full screen toolbar is static/hard-coded? (Hope not.)
   Maybe it just 'forgets' to check for customized toolbar settings?

Quite unintuitive either way.

ProblemType: Bug
Architecture: i386
DistroRelease: Ubuntu 8.10
ExecutablePath: /usr/bin/evince
Package: evince 2.24.1-0ubuntu1
ProcEnviron:
 PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: evince
Uname: Linux 2.6.27-7-generic i686

** Affects: evince (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug

-- 
Fullscreen mode ignores customized toolbar settings.
https://bugs.launchpad.net/bugs/291901
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs