[Smartmontools-database] ST31500341AS

2010-04-25 Thread shtripok

Прикрепленные файлы: disk-all-a.txt
Отправлены с помощью Документов Google http://docs.google.com/

smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model: ST31500341AS
Serial Number:9VS0Y9SQ
Firmware Version: CC1H
User Capacity:1,500,301,910,016 bytes
Device is:Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:Sat Apr 24 02:16:08 2010 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status:  (   0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 617) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:(0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:(0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: (   1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: (   2) minutes.
SCT capabilities:(0x103f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAG VALUE WORST THRESH TYPE  UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate 0x000f   117   099   006Pre-fail  Always   
-   145683190
  3 Spin_Up_Time0x0003   100   098   000Pre-fail  Always   
-   0
  4 Start_Stop_Count0x0032   100   100   020Old_age   Always   
-   605
  5 Reallocated_Sector_Ct   0x0033   100   100   036Pre-fail  Always   
-   13
  7 Seek_Error_Rate 0x000f   082   060   030Pre-fail  Always   
-   186900827
  9 Power_On_Hours  0x0032   093   093   000Old_age   Always   
-   6914
10 Spin_Retry_Count0x0013   100   100   097Pre-fail  Always   - 
  1
12 Power_Cycle_Count   0x0032   100   100   020Old_age   Always   - 
  605
184 Unknown_Attribute   0x0032   100   100   099Old_age   Always   
-   0
187 Reported_Uncorrect  0x0032   100   100   000Old_age   Always   
-   0
188 Unknown_Attribute   0x0032   100   054   000Old_age   Always   
-   365077790938
189 High_Fly_Writes 0x003a   092   092   000Old_age   Always   
-   8
190 Airflow_Temperature_Cel 0x0022   057   046   045Old_age   Always   
-   43 (Lifetime Min/Max 43/43)
194 Temperature_Celsius 0x0022   043   054   000Old_age   Always   
-   43 (0 19 0 0)
195 Hardware_ECC_Recovered  0x001a   048   032   000Old_age   Always   
-   145683190
197 Current_Pending_Sector  0x0012   100   100   000Old_age   Always   
-   0
198 Offline_Uncorrectable   0x0010   100   100   000Old_age   Offline  
-   0
199 UDMA_CRC_Error_Count0x003e   200   200   000Old_age   Always   
-   1287
240 Head_Flying_Hours   0x   100   253   000Old_age   Offline  
-   158643207019258
241 Unknown_Attribute   0x   100   253   000Old_age   Offline  
-   223468584
242 Unknown_Attribute   0x   100   253   000Old_age   Offline  
-   3017745862

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_DescriptionStatus  Remaining  LifeTime(hours)  
LBA_of_first_error
# 1  Short offline   Completed without error   00%  6913 -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
100  Not_testing
200  Not_testing
300  Not_testing
400  Not_testing
500  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.--
___

[Smartmontools-database] SAMSUNG MP0402H

2010-04-25 Thread Frieder Ferlemann
output of smartctl -a (after running smartctl --test=long) is attached.

(40GB 2.5" PATA disk)
smartctl 5.40 2010-04-20 r3084 [i686-suse-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG MP0402H
Serial Number:S03WJ10X622985
Firmware Version: UC100-11
User Capacity:40.060.403.712 bytes
Device is:Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
Local Time is:Sun Apr 25 22:10:20 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:  (   0) The previous self-test routine completed
without error or no self-test has ever 
been run.
Total time to complete Offline 
data collection: (2400) seconds.
Offline data collection
capabilities:(0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off 
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities:(0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:(0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine 
recommended polling time:(   1) minutes.
Extended self-test routine
recommended polling time:(  40) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAG VALUE WORST THRESH TYPE  UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate 0x000f   100   100   051Pre-fail  Always   
-   0
  3 Spin_Up_Time0x0007   090   088   011Pre-fail  Always   
-   2496
  4 Start_Stop_Count0x0032   100   100   000Old_age   Always   
-   838
  5 Reallocated_Sector_Ct   0x0033   100   100   011Pre-fail  Always   
-   0
  7 Seek_Error_Rate 0x000f   100   100   051Pre-fail  Always   
-   0
  8 Seek_Time_Performance   0x0025   100   100   011Pre-fail  Offline  
-   0
  9 Power_On_Hours  0x0032   100   100   000Old_age   Always   
-   53726
 10 Spin_Retry_Count0x0033   100   100   051Pre-fail  Always   
-   0
 12 Power_Cycle_Count   0x0032   100   100   000Old_age   Always   
-   548
191 G-Sense_Error_Rate  0x0012   100   100   000Old_age   Always   
-   4882
194 Temperature_Celsius 0x0022   121   097   000Old_age   Always   
-   39
195 Hardware_ECC_Recovered  0x001a   100   100   000Old_age   Always   
-   26975082
196 Reallocated_Event_Count 0x0032   100   100   000Old_age   Always   
-   0
197 Current_Pending_Sector  0x0012   100   100   000Old_age   Always   
-   0
198 Offline_Uncorrectable   0x0030   100   100   000Old_age   Offline  
-   0
199 UDMA_CRC_Error_Count0x003e   200   200   000Old_age   Always   
-   0
200 Multi_Zone_Error_Rate   0x000a   100   100   051Old_age   Always   
-   0
201 Soft_Read_Error_Rate0x0012   100   100   000Old_age   Always   
-   0
223 Load_Retry_Count0x0012   100   100   000Old_age   Always   
-   0
225 Load_Cycle_Count0x0012   092   092   000Old_age   Always   
-   90776
255 Unknown_Attribute   0x000a   100   100   051Old_age   Always   
-   0

SMART Error Log Version: 1
ATA Error Count: 214 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status regist