[sane-devel] Installingproblem with parallellportscanner and Sane.
Hi, could you please send the output of SANE_DEBUG_SANEI_PA4S2=128 scanimage -L kind regards -- jochen
[sane-devel] Installingproblem with parallellportscanner and Sane.
Hi, Philip Moller wrote: > Hi! > I read in the installationmanual > (http://penguin-breeder.org/sane/mustek_pp/) under "Known distribution > specific issues" that Fedora Core 1 has to remove the symbolic link > libsane.so.1, is that advice for Fedora Core 3 to ? no, it only affects fc1 Do you have ECP activated in your BIOS? If you have ECP something like this should show up in your dmesg: $ dmesg | grep parport parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] kind regards -- jochen
[sane-devel] Installingproblem with parallellportscanner and Sane.
Hi, try to pass the following options to the module parport_pc, for example in /etc/modules.conf options parport_pc irq=7 dma=3 io=0x378 it should then detect the port correctly. Let's see whether that helps :) kind regards -- jochen Philip Moller wrote: > Hi, > > No, I didn't have ECP activated before, but I have now, after your > advice and I have naturally rebooted my computer. > Only one problem (never ending), see here (consol-mode): > > [root] # dmesg | grep parport > parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] > parport0: irq 7 detected > parport0: Printer, Canon S750 > lp0: using parport0 (polling). > > Why isn't ECP shown above? I have change it in bios ? > You have to believe me on that. :-) > > I dubbelchecked in my bios and I have this value there now : > Mode: ECP > I/O Adress: 378h > DMA Channel: DMA3 > > But dmesg don't agree, why? > Is there something else I must do, like reinstall the Kernel or the > parport0 module, is there a module I have forgotten to install or what ? > > Thank's for all help. > > Sincerely, > Philip Moller > Malmo, Sweden > > Jochen Eisinger wrote: > >> Hi, >> >> Philip Moller wrote: >> >>> Hi! >>> I read in the installationmanual >>> (http://penguin-breeder.org/sane/mustek_pp/) under "Known distribution >>> specific issues" that Fedora Core 1 has to remove the symbolic link >>> libsane.so.1, is that advice for Fedora Core 3 to ? >> >> >> no, it only affects fc1 >> >> Do you have ECP activated in your BIOS? If you have ECP something like >> this should show up in your dmesg: >> >> $ dmesg | grep parport >> parport0: PC-style at 0x378 (0x778), irq 7, dma 1 >>[PCSPP,TRISTATE,COMPAT,ECP,DMA] >> >> kind regards >> -- jochen >> > >
[sane-devel] Installingproblem with parallellportscanner and Sane.
Hi, it's /etc/modprobe.conf in fedore core 3 :) kind regards -- jochen
[sane-devel] saned refuses to reply
Hi, have you tried the troubleshooting section at http://penguin-breeder.org/sane/saned/ ? I'm pretty sure that should solve your problem kind regards -- jochen
[sane-devel] Re: Parportscanner Mustek 600 III EP Plus.
Hi, could you try to set your BIOS settings to something else than EPP? Like SPP oder standard mode or something? kind regards -- jochen
[sane-devel] Work around for ever-lasting EPP/parport problem
Hi, I've commited a patch to CVS that introduces an option "no_epp" to mustek_pp.conf. When this option is defined, the EPP protocol is not tried. This works around a known bug in the parport kernel code of linux that causes the mustek_pp backend to hang on some systems. kind regards -- jochen
[sane-devel] saned quits after each request made by any frontend
Hi, saned isn't a stand-alone program, but you have to run it using (x)inetd. See http://penguin-breeder.org/sane/saned/ or the saned and sane-net man-pages. kind regards -- jochen
[sane-devel] Can someone help me with getting my Mustek 1200 ED scanner working?
Hi, what's the output of SANE_DEBUG_MUSTEK_PP=128 scanimage -L kind regasds -- jochen
[sane-devel] Thinking about trying to add support for Mustek 1200 III EP
Hi, I once started to write a driver for this scanner, which was quite unstable and only supported greyscale scanning. Basically, it's a modification of the ccd300 driver. I'm always thankful if somebody wants to take over a part of the backend by adding support for a scanner. However, this is quite a difficult and lengthy process. The low-level communication is already there, and the mustek_pp backend is written in such a way that you only have to implement the scanner protocol, the SANE protocol is handled by generic wrappers. anway, i'll try to find some usable material about this scanner - without that it's kinda worthless to start in the first place kind regards -- jochen
[sane-devel] ppSCSI driver suite updated
Hi, I've updated the ppSCSI driver suite patch for 2.6.13 kernels. Furthermore, I've added a stand-alone version, i.e. the ppSCSI drivers + Makefile, so you don't need to patch the kernel anymore but can build them seperatly. Both are available from http://penguin-breeder.org/kernel/download/ kind regards -- jochen
[sane-devel] ppSCSI driver suite updated
Henning Meier-Geinitz wrote: > Should we change the links in sane-hp.man and sane-microtek2 to your > page? i just checked those links and they don't work anyway. what about replacing them with the current ppscsi homepage, and also adding a link to my page? kind regards -- jochen
[sane-devel] edited /etc/sane.d/dll.conf, what next?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, that's a working configuration for me: option io-mode alt_lock option niceload port 0x378 option use600 option strip-height 16 option wait-bank 700 option wait-lamp 15 does this work for you? regards - -- jochen Mertens Bram wrote: > On Thu, 2002-11-28 at 17:13, Mertens Bram wrote: > > >On Thu, 2002-11-28 at 17:00, Jochen Eisinger wrote: > > > >>hum, i nearly forgot.. you're using a 600dpi scanner, there's a special > >>option for this in the config file. use600 (see the man-page) > >> > >>do you have that option set? > > > I added this line to the end of /etc/sane.d/mustek_pp.conf: > option use600 > > And now the resulting preview/scan is a completely black image! + the > scanner seemed to make more and louder noises than usual... > > Do I have t include the comments above this line (like in the man-page) > as well? > > TIA - -- ...and I doubt complaining to the author will get you anything but a free procmail rule. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE968sv8OF76YrreuMRAkpfAKDqU3tAP4A7LD9K4fpz2RZqZUJNtQCg9DKY K9ANw9Rg60AQTgTh2iI94JU= =gj2l -END PGP SIGNATURE-
[sane-devel] edited /etc/sane.d/dll.conf, what next?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Mertens Bram wrote: > * Something I haven't mentioned before because I can't see how this > would affect anything is that the scanner is attached to a "switchbox" > (a little box that allows more parallel devices to be attached to a > single parallel port.) If the switch is in the wrong position scanimage > can't detect the scanner, but the switch is in the correct position. You could try to connect the scanner directly to your pc... if that doesn't work I don't know more things to try.. regards - -- jochen - -- ...and I doubt complaining to the author will get you anything but a free procmail rule. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE97KJP8OF76YrreuMRAk7YAJ9iOHfhx/xty+wye3aNVntPhenPxACdHFCc vTSKfBYj1oKJm+rKhY+fGH8= =cgEc -END PGP SIGNATURE-
[sane-devel] Mustek 600 III EP Plus
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 The man page sane-mustek_pp contains examples for your scanner. Don't forget to uncomment the mustek_pp line in your dll.conf too. regards - -- jochen Hans Krueger wrote: > what should that mustek_pp.conf file should look like for Mustek 600 III > EP Plus > scanner that I have. > only one parallel port > suse 8.1 > thanks > - -- ...and I doubt complaining to the author will get you anything but a free procmail rule. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE97hRN8OF76YrreuMRAoa4AJ9TFN8GTFY0KqeelTwLJOhIlNrW1gCgz7mg fZRvRp6l/DEv4r/nkNWn/sc= =b+P9 -END PGP SIGNATURE-
[sane-devel] Problems with mustek_pp and releasing the parallel port
Hello, I've thought long about your problem but I still don't get how your parport can be locked that badly. What kernel version are you using? What Linux distribution? Could you please send the output of (after rebooting - that is in a state where the scan will work?) SANE_DEBUG_SANEI_PA4S2=6 scanimage --test regards -- jochen
[sane-devel] Problems with mustek_pp and releasing the parallel port
Hello, another idea. May it be, that there are any saned or scanimage running after the first scan attempt? regards -- jochen Jim George wrote: > Eddy and Joachen, > > when I tried to run saned under gdb I got the following output. Doesn't > look good does it? Can you tell me what I should do now? > > SANE_DEBUG_MUSTEK_PP=255 gdb > GNU gdb 5.2.1 > Copyright 2002 Free Software Foundation, Inc. > GDB is free software, covered by the GNU General Public License, and you > are welcome to change it and/or distribute copies of it under certain > conditions. Type "show copying" to see the conditions. > There is absolutely no warranty for GDB. Type "show warranty" for > details. This GDB was configured as "i586-suse-linux". > (gdb) exec-file /usr/sbin/saned > (gdb) r -d128 > Starting program: /usr/sbin/saned -d128 > [saned] main: starting debug mode (level 128) > [saned] main: trying to get port for service `sane' (getaddrinfo) > [saned] main: [0] socket () using IPv6 > [saned] main: [0] setsockopt () > [saned] main: [0] bind () to port 6566 > [saned] main: [0] bind failed: Address already in use > [saned] main: [1] socket () using IPv4 > [saned] main: [1] setsockopt () > [saned] main: [1] bind () to port 6566 > [saned] main: [1] bind failed: Address already in use > [saned] main: couldn't bind an address. Exiting. > > Program exited with code 01. > (gdb) > > > TIA, > > Jim > > > >
[sane-devel] problem connecting to saned over network
Hello, the problem with "Address already in use" is probably caused by an incorrect shell script. You cannot give option -d to saned in such a script but have to execute saned without parameters. On http://penguin-breeder.org/sane/saned/ an example is given. The other problem you've stated is that you cannot connect to saned when it is operated by xinetd. Do you mean that you cannot connect to it, not even with telnet, or that xsane (for example) doesn't list any scanner? I guess it's the later case. You're probably running saned as user "sane" from xinetd. Please make sure that user "sane" has appropriate access rights to your USB/SCSI/parport/whatever devices. regards -- jochen
[sane-devel] Mustek 1200CP scanner does not release parallel port
Hi, The bug you're describing should be fixed in CVS. Please try using CVS snapshot version. Why it behaves like a 600 CP scanner, I have no idea. best regards -- jochen
[sane-devel] mustek_pp now with CIS and CCD support... but first after SANE 1.0.13
This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --enig7E5A96C3DA3448ADC508E109 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, I've finally ported the CCD part to the new mustek_pp backend... sorry for the long delay. I tested it here, works for me. It's available as a patch to SANE 1.0.13. Due to the code freeze, I cannot submit it at the moment, so it will be available from 1.0.13.CVS on. A patch against SANE 1.0.13 is available from http://penguin-breeder.org/sane/mustek_pp/download/ (I'll update the docs tommorow) This patch also includes support for auto probing the port for both CCD & CIS scanners. Please test and report (if any) the bugs :) Missing (ccd) parport scanners are now 600 dpi ones, those with ASIC 1505 and A3EP... (but they weren't supported by the old mustek_pp_ccd code either) best regards -- jochen --enig7E5A96C3DA3448ADC508E109 Content-Type: application/pgp-signature -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQE/uVzN8OF76YrreuMRAmsZAJ9EIp9755onkbAw9CRjvC7jYGw37QCgiWnj g3knV7j6LXeVQtPFKHvrcLU= =Kwuk -END PGP SIGNATURE- --enig7E5A96C3DA3448ADC508E109--
[sane-devel] mailing list search engine
Hi, sorry for the lately unreliable operation of the mailing list search engine. I'm experiencing disk space shortage at the moment, I hope I can fix that within a few days. best regards -- jochen
[sane-devel] New sanei_pa4s2 in cvs
This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --enig5F795099F5F25C456C69E563 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, I commited the new (and fixed) sanei_pa4s2 to cvs earlier today. In order to use the mustek_pp backend, you either have to install libieee1284 (and have configure detect it) [recommended] or enable direct port io (also with configure). What about including libieee1284 into the SANE distribution? I'd volunteer on keeping it up to date. best regards -- jochen --enig5F795099F5F25C456C69E563 Content-Type: application/pgp-signature -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE+4J7G8OF76YrreuMRAqaLAKCy9nqr1UQzhP+k89WXZiia59fSRACdENzZ cQ06fauc1LM7IZ3qWqswxn0= =r9hg -END PGP SIGNATURE- --enig5F795099F5F25C456C69E563--
[sane-devel] New sanei_pa4s2 in cvs
This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --enigC23D0D5E5B47D942DBAEFBFB Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, Julien BLACHE wrote: > As long as one has the option of using the system's libieee1284, I > won't object. Otherwise you'll hear me scream ;-) Well ofcourse it just would be a fallback option. Not all systems come with libieee1284 and I'd like to keep the overhead to install SANE for mustek_pp as low as possible. regards -- jochen --enigC23D0D5E5B47D942DBAEFBFB Content-Type: application/pgp-signature -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE+4NA68OF76YrreuMRAmHaAJ9Uhvz7WYE8eOa1SwcwWG5ZY4X16ACglgGA ySz1x32JwRorH6R20zSHEYQ= =LU8O -END PGP SIGNATURE- --enigC23D0D5E5B47D942DBAEFBFB--
[sane-devel] Second draft of Scanner HOWTO for TLDP
--=.Ck,JUCF/u'4.N7 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Hi, some remarks on the Parallel Port sections: Interface Types -> Parallel Port Devices: Jonathan's page is really very outdated for some time now. It's better (also for the other scanner types) to check the supported scanners list on sane.informatik.uni-freiburg.de/cgi-bin/driver.pl Kernel Support -> Parallel Port Scanners: Not all scanner drivers need kernel level support. Some are using directio (this needs to be enabled in configure) You're also mixing dmesg and lsmod a little (lsmod is in bold, but a dmesg output is shown). You could also note that you might have to enabled certain transfer modes in the BIOS Making and Accessing the Scanner Devices -> Manually creating ... crw---1 root root 99, 0 Jun 24 13:47 parport0 crw---1 root root 99, 1 Jun 24 13:47 parport1 crw---1 root root 99, 2 Jun 24 13:47 parport2 crw---1 root root 99, 3 Jun 24 13:47 parport3 crw-r-1 root root 1, 4 Jan 1 1970 port if a scanner doesn't use the kernel drivers, it normally needs the port number as device name. Making and... -> Groups and Permissions: If a scanner doesn't use the kernel drivers, you have to use the sane daemon (saned) to let non-root users access the scanner Configuring SANE: Parallel port backends often need libieee1284 installed or directio enabled. You could also stress the point a little more that an old SANE installation is the reason #1 why self compiled SANE version don't work (as you'd expect) The network setup is missing the (x)inetd setup and doesn't mention the possibility of using passwords Testing your scanner: There's an option --test for scanimage that's it :) regards -- jochen --=.Ck,JUCF/u'4.N7 Content-Type: application/pgp-signature -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE++VrK8OF76YrreuMRArQTAKCReMsOr0kGL5l1uJpYK4DAbf9PvwCePze4 ZaxTEK0r7jeQMKdlfptoHP4= =ca9K -END PGP SIGNATURE- --=.Ck,JUCF/u'4.N7--
[sane-devel] Double-free following scan on ubuntu hardy 8.04 with epjitsu fi-60f
Hi, Julien BLACHE wrote: > Gah, that damn crash reporter is getting in the way. Can you try to > get rid of it? You have to set the env variable MALLOC_CHECK_ to 0, i.e., in bash export MALLOC_CHECK_=0 or in tcsh setenv MALLOC_CHECK_ 0 then you will get a proper backtrace with gdb.. http://www.gnu.org/software/libtool/manual/libc/Heap-Consistency-Checking.html If possible, use valgrind -v scanimage -d epjitsu to generate the backtrace, it will be more informative. regards -- jochen
[sane-devel] Double-free following scan on ubuntu hardy 8.04 with epjitsu fi-60f
Hi, I guess the bug is that in sane_close the scanner_devList entry corresponding to the open handle is destroyed, and later in sane_exit all scanner_devList entries are destroyed again. I guess in sane_close, the entry should be be destroyed, but only marked as free or so. regards -- jochen
[sane-devel] [PATCH] Fix catman error of sane-mustek_pp.man
Hi, thanks for reporting this. It's fixed in CVS now. regards -- jochen
[sane-devel] hal fdi rules to grant user "saned" access to scanner devices
Hi, I don't know whether somebody came up with a similar or better solution, so here's mine: On new linux installations, where hal is used to manage device access rights, the old way of granting user saned access rights to scanners by adding the user to the group scanner or so no longer works. hal will add and remove individual users to the acl of the device file, while the file itself is owned by root. Adding the following rule to /etc/hal/fdi/policy/saned.fdi also adds user saned to the acl: saned if nobody comes up with a better idea, i'll include this on the saned troubleshooting webpage soon regards -- jochen
[sane-devel] [Fwd: Problem with Boolean search on SANE site -- R.C.]
Hi, > I'm trying to see what SANE has to offer for page scanners or sheet > scanners (the portable, non-bulk feed variety). I selected Boolean > search, then entered search terms: page scanner, "page scanner" and, > page and scanner, plus the same combinations for "sheet scanner" > It seems there is no way of searching for a string? I'm search results > with both words separated, or, with both words concatenated (with no > space between). Could you give me an example I could follow? I don't quite understand what exactly you want to do. The search engine is an htdig engine, so you can check their documentation: http://www.htdig.org/hts_method.html So a search like (page OR sheet) AND scanner is valid. However, there's no way to search for documents where the words page and scanner are close to each other. You can try google for that: http://google.com/search?q=page-scanner%20site:lists.alioth.debian.org regards -- jochen
[sane-devel] search/bin/driver-cvs.sh on alioth gone?
Hi, since a few days this file is gone (it used to be in the sane group home-directory on alioth). Does somebody know why? best -jochen
[sane-devel] Vendor and product ids in description files
Hi, the search engine (http://www.sane-project.org/cgi-bin/driver.pl) now supports search for usb-ids as well. You can either fill in the IDs in the form (you can also leave out either the vendor or the product ID), or invoke the script directly: driver.pl?p=4002 will search for usb devices with product id 0x4002 etc furthermore, the vendor name HP is now recognized (you had to write something like hew or the whole company name in the last version), and you can omit the bus type when invoking the script (it defaults to any), so something like this works now: driver.pl?manu=hp or driver.pl?model=lide60 regards -- jochen
[sane-devel] Mustek 1200 CP not working with sane 1.0.17 on FreeBSD
Hi, Dura-Zell wrote: > [sanei_pa4s2] pa4s2_open: device `0x378` opened... this looks good... > [sanei_pa4s2] pa4s2_readbyte_nib: reading value 0x77 from '0x378' and this looks very bad. should be A5 or A8 or similar. is your parallel port configured in EPP mode (maybe you can configure that in the BIOS? regards -- jochen
[sane-devel] Mustek 1200 CP not working with sane 1.0.17 on FreeBSD
Hi, Dura-Zell wrote: > To exclude any hardwarproblems I tested the parallelport with some other > devices: you don't happen to have the possibility to try your scanner with the original drivers? regards -- jochen
[sane-devel] SANE2 commitment
Hi, Alessandro Zummo wrote: > I'd appreciate if everyone who is interested can reply > with their own commitments for the 2007.. ehm.. sane2 :) I'm quite surprised to hear there is a sane2 standard - at least one that we can easily start to implement. I don't think it's a good idea to start hacking something before it's clear we have a standard that will support us for the next few years. regards -- jochen
[sane-devel] Cann't get Mustek 600 III EP working.
Hi, tj wrote: > What else if anything do I need to do? did you check the troubleshooting guide at http://penguin-breeder.org/sane/mustek_pp/#trouble ? regards -- jochen
[sane-devel] Re: SANEd and DNS-SD
Hi, I've forwarded your mail to the sane mailing list. I'm not sure who should be the contact person, so it's probably the best to discuss this on the list. regards -- jochen Alex Austin wrote: > Jochen, > > I am working on building an integrated product which runs SANEd. When > looking into writing frontend drivers, I realized that automatic > discovery would be advantageous, and the best protocol for this, right > now, seems to be DNS-SD (used in Apple's Bonjour suite). I will soon be > writing a windows WIA microdriver for the SANE net backend, and I think > auto discovery is necessary for it to work properly. (UPnP doesn't seem > to quite fit...) > > DNS-SD relies on DNS SRV records sent via multicast DNS service. To use > this technology effectively, a DNS SRV Service Type needs to be > registered, and I don't think I'm the right person to specify as > "in-charge" of the protocol. > > See http://www.dns-sd.org/ServiceTypes.html > > The info I've collected so far: > Short name of protocol: sane-port > Long description: SANE Control Port > Name and Email of Responsible Party: Jochen Eisinger > mailto:joc...@penguin-breeder.org>> <- ??? > Is this okay? > URL of Protocol Description: http://www.sane-project.org/html/doc015.html > Primary transport protocol: _tcp > TXT Record service keys: None > > Would you care to register it, or can you point me to a more appropriate > person? > > Thank you. > > -- > - Alex Austin > Circuitsoft Computer Services > (651) 238-9273 > www.circuitsoftcs.com <http://www.circuitsoftcs.com> > > "...and then I visited Wikipedia ...and the next 8 hours are a blur."
[sane-devel] Re: SANEd and DNS-SD
Hi, Alex Austin wrote: > I'm working on a SANEd / WIA (Windows Imaging Architecture) bridge > driver right now. I suppose I could be the contact person, but if > someone else would prefer, I have no attachment to it. I figured the > head maintainer of the SANE net backend could, but looking further, I'm > not sure there is one. basically, I could be the contact person, yes. > As for TXT Records, Can't the protocol version be determined easily from > connecting to the daemon? same with ssl/tls? that's not clear yet, since the SANE 2 is still under development and the net protocol (hopefully) won't be compatible to the current one. regards -- jochen
[sane-devel] Re: SANEd and DNS-SD
Hi, Circuitsoft Development wrote: > Why not? Almost every other daemon I've seen does. that's not the point here. I don't want to have some more or less unrelated registry entry to enforce a design decision for future versions. regards -- jochen
[sane-devel] Saned problem
Hi, Wouter van Marle wrote: > However doing the same as user, doesn't detect the scanner. looks as if the usb device doesn't have the correct access rights. I'm not sure where it's mounted on debian, either /proc/bus/usb/aaa/bbb where aaa and bbb are the values in epson:libusb:aaa:bbb or /dev/usb/aaa/bbb regards -- jochen
[sane-devel] Saned problem
Hi, is saned actually executed when you run it from inetd? can you connect with telnet for example? regards -- jochen
[sane-devel] Saned problem
Hi, what does ls -l /dev/bus/usb/001/002 show? Assuming you don't have appropriate access rights to this device, does changing access rights help? regards -- jochen
[sane-devel] SANE 1.0.18 and the NSLU2 running OpenWRT
Hi, that's a common problem of many backends, please file a bug at our alioth bug tracker. See bug #303681 http://alioth.debian.org/tracker/index.php?func=detail&aid=303681&group_id=30186&atid=410366 for a similar bug. regards -- jochen
[sane-devel] USB to parallel port converters
Hi, Neil Youngman wrote: > I have a Mustek 1200CP parallel scanner, which appears to be supported by Better buy a new scanner :) > sane-find-scanner -p -vv /dev/usb/lp0 doesn't find any scanners. Is there > something else I should try, or won't it work with a converter? lp0 is a printer device. So I guess you have an parallel port printer to usb printer converter. That can't work with the scanner. I don't know whether there is something like 'generic parallel port over usb'. Better buy a new scanner. regards -- jochen
[sane-devel] Blank Scans on Mustek 600 CP
--=.D36NLyRkPgK6vG Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Hi, Please use either backend version 1.0.11-alpha (download it from http://www.penguin-breeder.org/?page=mustek_pp) or apply Eddy's patches for CIS scanners (http://home.tiscalinet.be/EddyDeGreef/ - the 600CP is a CIS scanner...). Using the newer backend is the better choice btw... regards -- jochen [TP Reitzel] > > > I'm using a Mustek 600 CP parallel port scanner. I've downloaded, > compiled, and installed sane-backends-1.07 in addition to xsane-0.85 > for Slackware 8.0. I've read and reread all of the documentation on > the website, Penguin-Breeders.org. Everything appears normal as I can > hear the scanner operate. However, I'm having difficulty in scanning > an image from xsane or scanimage. All my scans come up BLANK. I do not > have any SCSI functions enabled in the kernel at this point. The > output of SANE_DEBUG_MUSTEK_PP=128 scanimage -L is: -- "I'd rather die before using Micro$oft Word" -- Donald E. Knuth (asked whether he'd reinvent TeX in the light of M$ Word) GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc (0x8AEB7AE3) --=.D36NLyRkPgK6vG Content-Type: application/pgp-signature -BEGIN PGP MESSAGE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE865F/8OF76YrreuMRAs63AJ4iiJ/bG/pk4rlUwQ0L7advhlXOtACgszzU mbiFvpIVPczCbMhHnsbeH/4= =h7SX -END PGP MESSAGE- --=.D36NLyRkPgK6vG--
[sane-devel] saned.man
--=.AGf7y02i'gR/A0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Hi, [Andrei B.] > I used the example shown for inetd.conf using tcpd directly, but it > did not work because tcpd expected to find saned in /usr/sbin, while > it was installed in /usr/local/sbin. > > I'd suggest to change the example for this case to reflect this by > using the full pathname for saned. Since the xinetd example contains the full pathname i think we can do the same for the inetd example. However, the location of the tcpd binary is fixed in the man-page. Can we assume ppl are smart enough to know where their tcpd is installed to? I think yes. If nobody objects I'd change this in the man-page tommorow. regards -- jochen -- "I'd rather die before using Micro$oft Word" -- Donald E. Knuth (asked whether he'd reinvent TeX in the light of M$ Word) GnuGP public key for jochen.eisin...@gmx.de: http://penguin-breeder.org/?page=sigs (0x8AEB7AE3) --=.AGf7y02i'gR/A0 Content-Type: application/pgp-signature -BEGIN PGP MESSAGE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE89g0W8OF76YrreuMRAoreAKDJcZc+/vf43HvHiZygUItj/qSIdQCfYakO ZtccA7ZpLpXaNnsqVsmYju4= =Lzss -END PGP MESSAGE- --=.AGf7y02i'gR/A0--
[sane-devel] Re: Mustek 600 III EP Plus problems
--=.In0vTD?05_+AN5 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Hi, to which port is your scanner connected? Or are you using a printer while trying to scan? You could try to unload the parport modules (or at least make sure they do not lock the port address...) regards -- jochen [Kristen Doyle] > I am trying to get it working on an linux box when i try though the > following comes up > > Linux 2.4.18 > > > [sanei_debug] Setting debug level of mustek_pp to 128. > [mustek_pp] init: SANE v1.0.8, backend v1.0.9-devel > [mustek_pp] I wouldn't let myself be root if I were you... > [mustek_pp] init: option niceload > [mustek_pp] init: trying port `0x378' > [mustek_pp] attach: couldn't attach to `0x378' (Invalid argument) > [mustek_pp] attach(v1.0.9-devel): line 2538: debug exception > [mustek_pp] init: couldn't attach to port `0x378' > [mustek_pp] init: 'name' only allowed after 'port' > [mustek_pp] init: 'vendor' only allowed after 'port' > [mustek_pp] init: option wait-lamp 15 > [mustek_pp] init: setting global option wait-lamp to 15 > [mustek_pp] init: option strip-height 16 > [mustek_pp] init: setting global option strip-height to 16 > > No scanners were identified. If you were expecting something > different, check that the scanner is plugged in, turned on and > detected by the sane-find-scanner tool (if appropriate). Please read > the documentation which came with this software (README, FAQ, > manpages).[mustek_pp] exit: (...) > comp3:/usr/local/etc/sane.d# -- ...and I doubt complaining to the author will get you anything but a free procmail rule. --=.In0vTD?05_+AN5 Content-Type: application/pgp-signature -BEGIN PGP MESSAGE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE8+zmL8OF76YrreuMRAn9xAKCrQGyV7wkGta4KbSGUomJqvZ6FxACg4jPl v7xgrEhdgL4kuUZtstYe6ZY= =FPz/ -END PGP MESSAGE- --=.In0vTD?05_+AN5--
[sane-devel] Re: Mustek 600 III EP Plus problems
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, [Gene Heskett] > So if you're asking can you print and scan at the same time, the > answer is yes IF the scanner driver plays nice. Does sane do that? > I dunno. I know, it doesn't (yet). That's because the driver is using the parallel port directly and not the parport API (which didn't exist back when I wrote the driver...) T'will come sometime, I promise :) regards - -- jochen - -- ...and I doubt complaining to the author will get you anything but a free procmail rule. -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE8+7Mb8OF76YrreuMRAgjPAJ0U5kWdyPsS68urQAdzXCdFUt2ZTwCfbT1y xpHzMqIpDxRb63Kz4y0B514= =3izj -END PGP SIGNATURE-
[sane-devel] few newbie questions/problems
The following is an OpenPGP/MIME signed message created by Enigmail/Mozilla, following RFC 2440 and RFC 2015 --enig302F6C67C1E7CA256B0EFE8A Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit Hi, Grzegorz Jaskiewicz wrote: > 1) how should i configure sane 1.0.7, in Rh 7.3 i am using to work with > my scanner. Even if it can only switch off the light. It's a mustek pp scanner, so you could try the mustek_pp backend... google.com/search?q=mustek+pp+scanner+linux+sane gives the correct link as best hit... How to configure the backend is also described in the man-page man sane-mustek_pp (you can also access this information through the SANE homepage). However, your scanner isn't supported yet (not even partially) > 2) Does somebody still work on that scanner back end ? I not, and > somebody has resources (disasm of drivers, some documentation) i will > gladly finish it. No problem for me, i don't have much time. But that > will be for me use full so i can do that. I do. I also have source codes from mustek... > 3) Somebody should add newbie guide on sane site ! There is nothing for > unexperienced users. Ah, we have a volunteer here! Btw, it's hard to write newbie guides, if nobody reads them... ;-) Well, stay tuned, sooner or later a driver for your scanner will pop up. regards -- jochen -- ...and I doubt complaining to the author will get you anything but a free procmail rule. --enig302F6C67C1E7CA256B0EFE8A Content-Type: application/pgp-signature -BEGIN PGP MESSAGE- Version: GnuPG v1.0.7 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE9A5wi8OF76YrreuMRAiw0AJ9riAlGVJHhecg8RJUcGanmPlxoWQCgnK10 bLBVN/BnzWAenvQhiao0ghU= =VmqE -END PGP MESSAGE- --enig302F6C67C1E7CA256B0EFE8A--
[sane-devel] Usage of parallel port scanner
The following is an OpenPGP/MIME signed message created by Enigmail/Mozilla, following RFC 2440 and RFC 2015 --enig1572E1EE0932CC393A1AE65B Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, lp0 etc are line printers (therefor lp) and not scanners. Please define the port as described in the configfile /etc/sane.d/mustek_pp.conf or the man-page sane-mustek_pp regards -- jochen Joachim Backes wrote: > Hi, > > I want to use my medion9848 scanner,attached to the parallel port, > under linux (redhat 7.3). It is a mustek scanner. My problem: When using > scanimage for example, how to define the scan device? I tried > -d mustek_pp:/dev/lp0, but this was rejected by: > > scanimage: open of device mustek_pp:/dev/lp0 failed: Invalid argument > > The parallel port is configured correctly - my printer runs at /dev/lp0 > without problems. > > Any idea? > > Regards > > Joachim Backes > > -- > > Joachim Backes| Univ. of Kaiserslautern > Computer Center, High Performance Computing | Phone: +49-631-205-2438 > D-67653 Kaiserslautern, PO Box 3049, Germany | Fax: +49-631-205-3056 > -+ > WWW: http://hlrwm.rhrk.uni-kl.de/home/staff/backes.html > > > ___ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel -- ...and I doubt complaining to the author will get you anything but a free procmail rule. --enig1572E1EE0932CC393A1AE65B Content-Type: application/pgp-signature -BEGIN PGP MESSAGE- Version: GnuPG v1.0.7 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE9DbHl8OF76YrreuMRAot7AKCnb1WQiwxL6XIOt9VB49hGxgce3QCdFz3u h3WIDwbrduiYb9V7aVTTX/M= =uOHY -END PGP MESSAGE- --enig1572E1EE0932CC393A1AE65B--
[sane-devel] mustek_pp-11.alpha with gphoto2 problem
Hi, the debian package does _not_ include the gphoto2 backend by default, you have to modify the debian/rules file to configure the gphoto2 backend, i.e. include the option --with-gphoto2 in the configure call. (Il package Debian non include di default il backend di gphoto2, devi modificare i debian/rules file per configurare il backend di gphoto2. Esempio: includi l'opzione --with-gphoto2 nel ./configure) regards -- jochen -- ...and I doubt complaining to the author will get you anything but a free procmail rule.
[sane-devel] New sane-net homepage
--=./KnjxXs?IEh'N, Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Hi, due to problems with the isp hosting the old sane-net homepage, the page has moved to http://www.penguin-breeder.org/?page=sane-net Please update your bookmarks. The old URL now redirects to the new page. regards -- jochen -- "I'd rather die before using Micro$oft Word" -- Donald E. Knuth (asked whether he'd reinvent TeX in the light of M$ Word) GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc (0x8AEB7AE3) --=./KnjxXs?IEh'N, Content-Type: application/pgp-signature -BEGIN PGP MESSAGE- Version: GnuPG v1.0.6 (GNU/Linux) iD8DBQE8zovS8OF76YrreuMRAkL8AJ9mznXqaVBiKvxdMIewSB9GXF/9rACePp3r 7A5ovox0dB6GyVo/iy8m3jA= =nTwK -END PGP MESSAGE- --=./KnjxXs?IEh'N,--
[sane-devel] New mustek_pp (alpha) backend available for testing.
--=.xTPmA5y/RBN1w+ Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Hi, a completly rewritten version of the mustek_pp backend is available for testing at: http://www.penguin-breeder.org/?page=mustek_pp So far, only CIS scanners are supported - thanks to Eddy De Greef for implementing this part! Support for CCD scanners will be added soon. Please test this backend, so it can make it's way into CVS soon. This backend was developed using information kindly provided by Mustek, thanks for your support! Due to problems with the isp hosting the old mustek_pp homepage, the old page now just redirects to the new url. regards -- jochen -- "I'd rather die before using Micro$oft Word" -- Donald E. Knuth (asked whether he'd reinvent TeX in the light of M$ Word) GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc (0x8AEB7AE3) --=.xTPmA5y/RBN1w+ Content-Type: application/pgp-signature -BEGIN PGP MESSAGE- Version: GnuPG v1.0.6 (GNU/Linux) iD8DBQE8zo938OF76YrreuMRAnLwAKD2IKHqRfqN8eQfk/mxpi+4qO2hkQCfRwGV jjYZ6cwqkt7xmuRxdQIsqKg= =RkYH -END PGP MESSAGE- --=.xTPmA5y/RBN1w+--
[sane-devel] todo entry for saned: support for network masks
--u1'7p0?wL_3=.K=. Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Hi, I added a TODO entry for saned: - Add support for IP ranges in saned.conf (like 10.0.0.0/8) should not be difficult to add, however the config file format needs to changed for IPv6 anway, so I decided not to change anything yet. regards -- jochen -- "I'd rather die before using Micro$oft Word" -- Donald E. Knuth (asked whether he'd reinvent TeX in the light of M$ Word) GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc (0x8AEB7AE3) --u1'7p0?wL_3=.K=. Content-Type: application/pgp-signature -BEGIN PGP MESSAGE- Version: GnuPG v1.0.6 (GNU/Linux) iD8DBQE8zo5x8OF76YrreuMRAp5GAKCFN5cR3Fsql+ceAMKFxiQn6LVKkgCgxGnV V738QTjc0Me1TZrPtwL7oyg= =HaZe -END PGP MESSAGE- --u1'7p0?wL_3=.K=.--
[sane-devel] Mustek ASIC 1505 Scanners
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, Melanie wrote: > I have been given a Mustek ScanExpress A3 EP scanner, which turned out > to be 1505 based (ID 0xA2). I have so far located 3 different Mustek > backends, only one of which offers the beginnings of support for the > 1505 chipset. three different backends? the cvs & penguin-breeder one are the same but different version... but which is the third? > The one that is included in the most recent SANE release has a #define > that, when turned on, will make the driver recognize the chip. However, > there is no further support for the chipset and the scanner simply sits > there and does nothing. Yes, I added those defines to have some point to start when some day there would be support for this scanner. > The main issue, as far as I see, is to write the code to get the scanner > to move the carriage and start sending image data. My assumption, based > on the fact that existing code is able to turn the lamp off, is that > basic communication with the scanner is possible using existing code as > well. mhm, to reuse such common code is the aim of the new version located at penguin-breeder.org > I would be interested in finding out if anyone has ever had any success > in activating even the most basic functions on 1505 scanners, and > possibly source code or documentation to that effect. If there is driver > development in progress, I also would be interested to find out the > current status and maybe join in for a few lines of code, too. there were somebody working on this, but i have lost track of him/her and never heard of a success story > Finally, I wonder if the person who has once received a favourable > response from Mustek is subscribed to this list and would be willing to > try for the source code to the 1505 based scanner's TWAIN driver as > well, or would at least disclose the contact at Mustek who has > previously released information and / or source code. that would be me then... actually, we came to the most interesting part here... and it's nearly midnight again... I'll answer the rest next week (i'm off over the weekend), so you have at least a first answer and don't need to feel ignored :) regards - -- jochen - -- ...and I doubt complaining to the author will get you anything but a free procmail rule. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE91CYn8OF76YrreuMRAhorAJ9wA/ze8p+V+DRbhYHBfcCrYISC5wCgp8P4 dliEi0EaW6yV/tnmXtPdAoo= =nxcw -END PGP SIGNATURE-
[sane-devel] edited /etc/sane.d/dll.conf, what next?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, does scanimage -L show your scanner? If yes, could you please send me the output of the following command: SANE_DEBUG_MUSTEK_PP=128 scanimage -T regards - -- jochen - -- ...and I doubt complaining to the author will get you anything but a free procmail rule. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE94T878OF76YrreuMRAsK7AKDAu6eRNbypjPfif5trt2LWVYEYkgCfQ7hl W92D7DzRk0cmH58dp0J5VRA= =O7f/ -END PGP SIGNATURE-
[sane-devel] edited /etc/sane.d/dll.conf, what next?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, Mertens Bram wrote: > [mustek_pp] attach: asic 0xa5, ccd 01 That appears to be a 600dpi scanner, for those only grayscale scanning is supported? can you scan grayscale pictures? regards - -- jochen - -- ...and I doubt complaining to the author will get you anything but a free procmail rule. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE941+X8OF76YrreuMRApa4AJ4kQm0t8tVEnePBbq5dL4ZAa/OuXQCgyVIu hGfYtEmkBqpeL4cGFfCqhX8= =3XN6 -END PGP SIGNATURE-
[sane-devel] edited /etc/sane.d/dll.conf, what next?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, Mertens Bram wrote: > I've tried to scan twice without the acquire preview but using the start > scan button from the main window and both times xsane crashed due to an > "Floating point exception"! > > Does that shed any light? not really... could you try scanimage --mode Gray --resolution 100 > test.pnm does this produce a correct image? regards - -- jochen - -- ...and I doubt complaining to the author will get you anything but a free procmail rule. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE945Z78OF76YrreuMRAr//AKCXA4FLcD9H0m8XOLmsu3fpWqEP0ACgrwoi EL6TKv2sIkyvpfPhcZnJa7Y= =LP+K -END PGP SIGNATURE-
[sane-devel] edited /etc/sane.d/dll.conf, what next?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, hum, i nearly forgot.. you're using a 600dpi scanner, there's a special option for this in the config file. use600 (see the man-page) do you have that option set? regards - -- jochen Mertens Bram wrote: > On Tue, 2002-11-26 at 16:42, Jochen Eisinger wrote: > > >could you try > > > >scanimage --mode Gray --resolution 100 > test.pnm > > > >does this produce a correct image? > > > This results in a 986K blank image... (By that I mean it is as if I have > scanned a completely white page or something - while the test-page is > completely blue with some text on it) > [root@localhost M8ram]# scanimage -L > device `mustek_pp:MD9848' is a Medion MFS-600IIIP flatbed scanner > [root@localhost M8ram]# scanimage --mode Gray --resolution 100 > > test.pnm > -rw-rw-r--1 M8ramM8ram986k Nov 26 17:45 test.pnm > > So the file seems to be ok, only the info that gets written to it seems > to be replaced by a blank image... > > Thanks - -- ...and I doubt complaining to the author will get you anything but a free procmail rule. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE95j2X8OF76YrreuMRAiggAJ0Txwmm4fzu6+BFSCl99VmQXZ6XpQCeMZMs 5zP3lqVxekpPGzCJ8bHn8H4= =wtmd -END PGP SIGNATURE-
[sane-devel] edited /etc/sane.d/dll.conf, what next?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, Mertens Bram wrote: > Do I simply add this line to the end of the file? > The section > # Use this option for 600 dpi scanners > # for example ScanExpress 1200 ED Plus > #option use600 yes, that's it regards - -- jochen - -- ...and I doubt complaining to the author will get you anything but a free procmail rule. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE95mV+8OF76YrreuMRArs2AKDfNslV+r7T8/+77Axb4Yirv8Au/QCeKHOs NpE3LwrQ3Xx9E44E2R7oTFc= =4Yxc -END PGP SIGNATURE-
[sane-devel] new sanei_pa4s2 supporting libieee1284. please test
This is a multi-part message in MIME format. --030003090207040009070707 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, attached is a new version of the sanei pa4s2. Most important changes are support for libieee1284 and a function sanei_pa4s2_devices() returning possible device names (could be used inside sane_find_scanner or within the sane_init function of mustek_pp). Please test this new sanei. It works for me[tm] and if nobody objects I'll add it after the next release to the CVS. Please note that you need to enable the sanei explicitly with --enable-parport-directio if you don't have the libieee1284 installed. Otherwise it won't be compiled anymore. any comment is welcome regards -- jochen --030003090207040009070707 Content-Type: application/gzip; name="sanei_pa4s2.tar.gz" Content-Transfer-Encoding: base64 Content-Disposition: inline; filename="sanei_pa4s2.tar.gz" H4sIAAANvj4AA+w8/VfbuJbzK/krNMyhTZiUOgnQPlL6NkBo8wYCh4SZ09Pp8zO2Qjw4dtZ2 gGyH/33vlWRZtuUkUKZvz+5yZgqRpfv9Jek6keVT9/UPf+mPYWwbb3Z24LfReLNj4G+jsb3N foufH4w3uztvto3d1i6MNxotmEZ2/lqy+M8siq2QkB/sYDSidNE8Gkbfg6Dv+xMx/bN/zam1 HTW37GfHYTQMY5fru6j/RnO32XzD9L+zu9totuDvRmu31fqBGM9Oiebn/7j+X28SVD55RQa2 5fs0JB3bplFE+sEd6VrRfKtCCDkMpvPQvR7HpHpYI01Q2yv4p0X+Edhj6pOuG7n+Nax99wcb 2KJi4D+uJ/dbPo3fI5Dh2I3IyPUogd9TK4xJMCLxmJJBp9+FAfvGuqZbFTl1GgbXoTXB2aOQ UhIFo/jOCmmbzIMZAWpJSB03ikP3ahYD0JhYvvM6CBHAJHDc0RzHZr4DhCGamIaTKMH5oX9J PlDg1/LI+ezKc21y4trUjyixIoQwxcFoTB1yNWcrjpGGgaCBHAcA2IrdwG8T6sLzkNyCgcBn 0hQ4EIqAWSdBSKpWjJSHJJjiuhqQOyeeFadL9cynPDrE9Rkt42AK/IwBIHB453oeuaIELHQ0 8+oEZiKY33rDj2eXQ9LpfyK/dS4uOv3hpzZMjsfBLCb0lnJQ7mTquQAZuAotP54D8bj6tHtx +BGWdA56J73hJ6T/uDfsdwcDcnx2QTrkvHMx7B1ennQuyPnlxfnZoLtFyIDSRLoIpETAIwA2 CUCIDo0t14s4259AqRHQ5jlkbN1SUK5N3VugzCI2mN9yxSEQywv8a8YkTE7F2CbuiPhBXCd3 oQu2EgdFleLyVKt10vPtrTrZ+RsZUhARJeeeZTM/mSGEVsuok4MgimEqk1eHGM1Go/Gq0TLe 1MnloMO56kRAfzSltgv00nubTjl0RG/NQBchM0nmAtfALpmClboRM6QRt2XLcVxcBABAxdKC PfcqtEIXBuzABzn6iXkA2yH1qAWSFpATu6IpBWhYaEB1lAz6k+f6N0AqI4SDnnM5Bsy40W+Z X4DoQKjODGQBHkjvqT2LrSuP1jlmJwCCQNLoNW4cUW8EngpkJw4R0mjmxRAclKUIE+zXDsAN Un8rKlpxqC1mLyEKhMsDXEEBCISAKPwArHqOKMF/bHSfwGcCtW3QMws/yDUSI8NQwrodOADG B8rcWHHLVH4Jo3VwxjvwphAk6d9angv2Q5lrc8GFoIjAj8jdeM7Ex5QgCWXhcMIi62MlwIjq ceVFs6sJRAJ7bEHUjVCejBlh5hMwDmYgYSRE7fq2N3OYwTCBIICI/ueMglSE7dQZYOsaXQTo 4RjiRFYSEwiesxVE6egEpA5Y1MCVuqRigkCVHWcY4e7JordrM0dk9s7D5h1zCcZaHQMfAGMP 7HEAMkEod2PKhI5Gin4U51HCA2s69eb4B1ubQbWlUOIEzIzvIAcIR3FAMBg7shBhEiDfIpVc isOYMQF5RugmwCkNRxg/kAEU4CnUHfSGnJ8D9e40ojHpbA+aZPN1pQIp2aFXs2vigVl50R4C NiDwAKYxyB8/NuAjDUMIHvipCZ8ggvnwkH1uwWc2FQwUaENeb/zgDh9twyNm2iOPD+zAAA/D oKRkcBfBgynOGZSENRrRDGEsBYOakfhZlFgG9W/dMPCRdXIL8QnNHNej1syj7sHlBxP/7Jnn kuGfhDmSdSxFXkM4G7nXW+N1eOLQEdgtOegc/tLtH5n9zmmXKMVqfil/dAWlBPUdgLAGspy6 9g2ZTYHtyRTUfOV6LmQ5ABwJ5CP4m3zs/No1L/u9wfDI/JiCfTfzwYgB1PvKTwDSHbEFhJPl VNmqk95Br9vtNppvt2vwmMi1LqUUR3E1LPeUhd1+5+CkewRCgNR5MTSPehfdw2HvjAPIIRh8 Gpi9M/NjDZ4pD0nVNHuHUI+9eEHYX+T9PnljGDhLzIFxCCKHpkmaOMo5UCiM5tFrN2DcrQwZ C6qRBMzAqpylKzM8dAanKQ8pAVY0SQlIyMvAK64uLl5DPc+uvTkrfgjqH/zBiaTOwSFB1zrI KNuPv+Uho1zGd5ysHHdu6+2uadYIclhVBcblUSN//lkQI2gVdhkQJ0Bsrg85h4JGbgPXqUAp dkWqMxMiJ1SBljeDuDszWREzDcK4VvkKvmOawCmsMM3bAOpFcFX4UF1nazeM+kZjfW9v3Von VQagVifrDnwAqFBOAQwOqdauPOjI4Lgrrs/oyGFWCWtXyknB1RuN+oaxvre+n1KyV0IIlgHx LPQTwA8VJmco4X6SlgvqHlyeM+c47Q0Gvf4HnCNckM2Fz+VzhbsSMIy8k+piDv6DEUcXT8rG xX4Z41QSRfoswMmwdXTwwez1e8MqmAsQcmVFkGk8NFOWROA/y4P6wIFwFPiYlUVsY1F2a7y1 tcVpFeCG3QFECglTyAEh/8gRs9lCxZBy1EhpOlfXoHQ3NpECsM19HpGPOyeDbptHteqPieHK sAHGLP9+B4kGPv+O0Zwkw6e9/tkFe1hNF9tTbxbh/+TvkEv2yHatVsoFhp3qQkJVSmsJeu3P 1/JHxZ9FgIiiuvY3A6ru1rndCBb3lHpAMAllwfoSQISsswQ7csMI6hp3Qn/31/XULQa0glUM Ly677SWAHqQbPo9iF2N7lGqfUbmrqncjKtPqyqC0Cq6DO51fdIfDT+bxZR9LhD4kmfbzqXiZ ktO6RwZUJdioxRCUTofmx27nqHsxqKlVBlSqvsjxaYaNHVczBtsvpdYqlFqD4QUEd56tlWUh FJ98WTG/sxUD7ZJoISooDIafzruFpVAaxPMpjbI1YSE9BNM4krkhDY4ceO/svHtxmq0VCrUk K6JkSK4Wk1zt/+W/gvyT8MT2G+bp2VHX7PcO1gzdA9gArDV0D7rn52vNPKzOoHdo9o7MhtFo rRn3nbflz3fw+U7Z8x2DPQcEFWQNKwmQ0MzGrfVXFI0vtyiKgTC3hc1SxDb+IfGtCf28+6XN xkUpByUHbbPy2H0dsE94nBTiAS8WxFx8fD4WDK5vzpIFWKxhSQIDf8fJ6Szq46bOUaaJkdw8 2FsjLDYrDOLADjwvncFonobUC+ybz60vHBoWL+xEh4FFEpXtWZ53xGFb06idMvJQOYeFF9Su k038q51xEY2TyXqJCxzPpRG16cG2j0yn+KudTBGgyeZUQOb5L/cUH37+QvZZAf113bhvvXkL YZz9risZL/t31jrZkSL5asAy+O/hoS5ANQWo5reDah0ccqoODp8KqvLQTtODkALXvJp/ZFY0 +bl3JDKQOAEwz86haugedy5PhgCO3sNsn1evsEdwQWfwjxnX2sw8+Pmw5UXiGIsk+/N86ctx B1Pqk6riI5sOvRUsDmAyVKjc5mZRTaoZN2ZiPRbnV/Qa3IJOp6SKgEdOPTHekF6nqxKDTtfN Y6ouK0UAAlxpHicEGH4KIcqyhYSsMo8T4rtXTyFEWbaQkGXz2Ekhg4hnrRpC6sruNYWQ2gaP WYWVm0lM0q1x3Ojxi2wPz0blkhLjWzVOqcYsEEDSTo6aTH4qGIcMHfuAO3lw3OjOje0xqYox 5skVUfnZmBcYHvPslz1ZDopN+no3PQq8w2M9pHG9rVncPxv2Ts9PihD6QZyeiPJ7CoXoMlid Xzu9EmDWreV6TBWBuPKAuiCmEy0oIKp7dHY5LII6m9LQ4gfDUG47JJjFWggX3X90D4fdoyIE VBBhpwo+vQ5il0ML6R8ULxz0nHU/HANjOmh9BQYT9V0IWbxEPqfdU51wyIROgnBOPDrSM4M7 H42S0S4IbhRcy3P/yxXnQFoIUJuVA+DRHtcvUEn/rKdjPyCpPHtHqZZL+Pi1c9I7wopYoxd+ F5PjAfzLmnlxcfqljyfkPveYZP5D5aGQ34C/SpLX3JhUM94snJllfiUMsA2diRaW2Xwt83he 4PALszrxZZVTYbtOwradKSl7pRg3ZmwfmY7V
[sane-devel] Search engine now on new server
Hi, I moved the mailing list archive and driver search engines to another box, namely belleile.informatik.uni-freiburg.de. If you're using (as you should) the alias sane.informatik.uni-freiburg.de, you shouldn't need to update anything. The new box features two UltraSPARC 2 (168mhz) CPUs, 512MB ram, 2x4GB SCSI discs and 100mbit internet connectivity. best regards -- jochen
[sane-devel] mustek_pp driver version 12-alpha
This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --enigC5068C84F9E9AC538F851276 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, I just commited version 12-alpha of the mustek_pp driver to the SANE CVS. It's a complete rewrite of the backend based on information provided by Mustek (thank you!). However, there are some differences: * CIS scanners are now completly supported, thanks to Eddy De Greef for writing the driver. He's now also maintaining this part of the backend * CCD scanners with 600dpi optical resolution aren't supported anymore (actually, they never really worked anyway) * CCD scanners with 300dpi are supported, but that part of the driver is not working yet * the config file syntax changed, i hope it's much easier now furthermore, the .desc file is incomplete and the backend exports tons of 'illegal' symbols, i'll fix this before code freeze... regards -- jochen --enigC5068C84F9E9AC538F851276 Content-Type: application/pgp-signature -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE+IclR8OF76YrreuMRAlmHAJ4+05FBH7OVhMB4OCRjc9/wGtE6sACg3t3N /84xSJHtg+gkJYEcLqv/psg= =AkJF -END PGP SIGNATURE- --enigC5068C84F9E9AC538F851276--
[sane-devel] how do i connect using net interface
Hi! Are you running saned as user root (as it should be for mustek_pp) or as user saned (as the saned man page describes - but which is only correct for scsi scanners)? regards -- jochen jerry white wrote: > Have been trying to connect a user to the scanner through the saned net > interface and all i can get is io error msg. > > using latest sane package and 2.4-16 kernel under mandrake kde2 > I have read saned man and set as described > > syntax i'm using "xsane net:localhost:mustek_pp" > what am I doing wrong? > > thanks for any help > > jerry white > ___ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel > -- "I'd rather die before using Micro$oft Word" -- Donald E. Knuth (asked whether he'd reinvent TeX in the light of M$ Word) GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc (0x8AEB7AE3)
[sane-devel] New saned - SANE network daemon homepage is online
Hi! I've started a homepage for saned/net... I hope this will help people to setup saned in the future. Please send me any suggestions/bug-reports... the url is: http://home.nexgo.de/jochen.eisinger/saned/ if nobody objects, I'll include this url into the net.spec file regards -- jochen
[sane-devel] [dev] net backend and SANE_ACTION_SET_AUTO
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi!
Thanks for the hint. I've checked it and you seem to be right. So I
corrected this one in the CVS.
Btw. SANE compiles with gcc-3.02.
regards
- -- jochen
mh wrote:
| Hi all,
| there seems to be a small problem with the net backend and calls to
| sane_control_option(...) with the parameter SANE_ACTION_SET_AUTO
| (SANE version 1.0.5).
|
| According to the SANE standard, "the value of parameter v is completely
| ignored in this case and may be NULL."
| However, the net backend doesn't check for this case, which results in a
| crash in the lines (around line 831, net.c)
|
| if (value_size > 0)
| {
| if ((SANE_Word) value_size == reply.value_size)
| memcpy (value, reply.value, reply.value_size);
|
| (because value == NULL, but value_size > 0)
|
| The line
|
| if(action == SANE_ACTION_SET_AUTO) value_size = 0;
|
| before (~ line 799, net.c)
|
| req.handle = s->handle;
| req.option = option;
| req.action = action;
| req.value_type = s->opt.desc[option]->type;
| ...
|
| seems to fix the problem.
| Can someone please take a look at this?
|
| Thanks + bb
| Michael
| ___
| Sane-devel mailing list
| sane-de...@www.mostang.com
| http://www.mostang.com/mailman/listinfo/sane-devel
|
- --
~ [This is a signature virus, please copy me into your signature file!]
~ GnuGP public key for jochen.eisin...@gmx.de:
~ http://home.nexgo.de/jochen.eisinger/pubkey.asc
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE7lmXE8OF76YrreuMRAqOZAKCAJSIkM/WRiyYu5Aur7W/qUd8uWwCfd5PJ
nxDgtl4NC0n7sqrbKBH9ek0=
=m2za
-END PGP SIGNATURE-
[sane-devel] [dev] net backend and timing problems? (pretty weird)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! Does this crash also occur with scanimage? and test? regards - -- jochen - -- ~ [This is a signature virus, please copy me into your signature file!] ~ GnuGP public key for jochen.eisin...@gmx.de: ~ http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7l+Hf8OF76YrreuMRAolpAJ9OZETb7EJYravkfQbESpLoA4w1ZgCdFn7B OxXOAHhMWM/Ai2qM38+C0Oc= =FkBT -END PGP SIGNATURE-
[sane-devel] [dev] net backend and timing problems? (pretty weird)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 ahh... and does this happen when using the pnm backend? regards - -- jochen - -- ~ [This is a signature virus, please copy me into your signature file!] ~ GnuGP public key for jochen.eisin...@gmx.de: ~ http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7l+678OF76YrreuMRAkj/AKCi7nO6WMDMUa4aaQXwApK+KyxYdQCeMt37 Vg60MqgDFao0RmSasDc8Wpg= =t3do -END PGP SIGNATURE-
[sane-devel] [dev] net backend and timing problems? (pretty weird)
This is a multi-part message in MIME format. --010407040601030205040309 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! The problem here is, my net backend just doesn't crash, no matter what i do :( I'd say this is the old "scan over localhost" problem. Anyway, I've rewritten parts of the net backend (basically adding lot's of DBG, some checks again NULL pointers and I've changed parts of the auth functions to avoid information leaks) Please try this backend with SANE_DEBUG_NET=128 and send me the output... regards - -- jochen mh wrote: | mh, Fre, 07 Sep 2001: | ... | |>BTW, maybe someone else with the same problem can try to add a sleep() too? |>AFAIR, there were a couple of reports about problems with the net backend/saned |>on the localhost. |> | | Just some additional infos: (I hope, this doesn't get boring) | I've just made some modifications in the net backend (net.c): | I've replaced all calls to do_cancel(s) in the function sane_read() with | calls to sane_cancel(s) . | Now the net backend works just fine (at least on the localhost). I did 500 | scans with the pnm backend and 50 with my Plustek (using quiteinsane). There | wasn't a single problem. The other frontends work without problems too. | Any explanation for this ? | | Michael | ___ | Sane-devel mailing list | sane-de...@www.mostang.com | http://www.mostang.com/mailman/listinfo/sane-devel | - -- ~ [This is a signature virus, please copy me into your signature file!] ~ GnuGP public key for jochen.eisin...@gmx.de: ~ http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7mWxW8OF76YrreuMRAo7bAJ4yKLu/RkO15GyrX7/tpSVCmEIAvACgy5y4 3Sck7rzVEK/mZKsu1kvk8jo= =2eZe -END PGP SIGNATURE- --010407040601030205040309 Content-Type: application/octet-stream; name="net.c.gz" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="net.c.gz" H4sIAEdsmTsCA+w823LbxpLP4leMlbJNyhQt2Zucihi5ipZpmxtZVJFUnKyTwoGAoYg1CCAA KJlx9O/b3XMHwYt9vKf2YV2JRA1mevrePT0NPj1ghZ9wdsjGgZ8kPGe9IOBFwS7SO9b3i2Wn wRg7S7NlHt3MStY8a7HjH3/8B3vl30Yhe5cW1zy/4fnhxE9ucOpkFhVsGsWcwe/Mz0uWTlk5 42zcu+jDQPDRv+Gdhp6a5elN7s9x9jTnnBXptLzzc95ly3TBACeW8zAqyjy6XpQAtGR+Ej5N cwQwT8NousSxRRIC6rhNyfN5ofZ8c3HF3nCgyo/Z5eI6jgJ2HgU8KTjzC4SQ4WAx4yG7XtKK 14jDWOLAXqcA2C+jNOkyHsHznN3yvIC/2TO5B0KRMNsszVnTLxHznKUZrmsBuksW+6VZWk+8 oTFkUUK4zNIM6JkBQKDwLopjds3ZouDTRdxmMBPBvB9M3g6vJqx38Rt73xuNeheT37owuZyl i5LxWy5ARfMsjgAyUJX7SbkE5HH1u/7o7C0s6b0cnA8mvyH+rweTi/54zF4PR6zHLnujyeDs 6rw3YpdXo8vhuN9hbMy54i4CWcPgKQCbp8DEkJd+FBeC7N9AqAXgFods5t9yEG7Ao1vAzGcB KNl2wSEQP06TGyISJhs2dlk0ZUlattldHoGulOmqSHG5kWqbDZKg02bf/8gmHFjE2WXsB2QN C4Tw/PlRm71MixKmEr967OjZ8fHx4fHzo3+02dW4J6jqFYB/kfEgAnz5p4BnAjpu7y9AFjmp JJnADZDLMtDSqCBFmgpd9sMwwkUAAESsNTiOrnM/j2AgSBPgY6LUA8jOecx94LSErPSKGwxQ sVCB2sgZtKc4Sj4CqoSIAL0UfExJudFuyS6AdcDUcAG8AAvkn3iwKP3rmLfFzmEKCAGn0Wqi suDxFCwV0FYGkfNiEZcRCMksRZigv0EKZmDsbVXQlkF1SF9yZIjgB5iCBRAQAVYkKWj1ErcE +wnQfNKEGBoEIGdyP0g1IqPdkCI9SEMAkwBmUWmZpeGfIrQNxngH1pQDJ5NbP45AfziZtmBc DoJIk4LdzZbEPhKCRpTc4Zz855dygJAaCOEVi+s5eIJgBq4W0AKsiRip5nNQDlKQvJCsjpIg XoSkMMQQBFDwPxccuCJ1p02A/Rs0EcBH7FAqXumdgPGCrLQwo3PgOuxiOy5jkpYKAlZB6RAi zJO8dxSQIZK+C7d5RyZBpLXR8QEwehDMUuAJQrmbcWI6KinaUVndEh74WRYv8QOtdbbqWJiE KanxHcQAaSghMAZ9hwsRJsHmloqICIcuYw7sLJRNJby8S/OPh9fA25DNwfOxawh5PAlBlw+e NhpPD8DFkNWCdHL6oCJKsphDLBU8RFVbSk4z3LQZpsnjEjlzw0uka5GRCsKGnZAXQQuhfxfy KSgAu+hPvF/6o/FgeMH2jztHnef7jcZ30RQeM683+LXxndINtt/pPJWfn8Z+HKeB35nt7wGa 767GE9DVOapvXtDWDNY+oI2AoGiKMGvAYD7xFLzVNLoBUPVzzFYWkJ94nidpZ/bCGpoGSRm7 Q3EEIi/csaIMwaarYzkosju2SEBbQzFG7Hjb+6XvnQ9ennlvLa7AHtcBzNpDRlzwXyfjkmdP hxlP8EMtB34qlsXTMprzChI4usw44WuNg9xAUiUwxJ0PY+G12nk4fvoMJMzDQuij508hj/Aq q9vsJs/zTqdDCrZeJPhjrUD0jGiHKR5q3Q7T0L0G3jViaU+Wq7W6vuyd/dy/eOVd9N71QdVR p7eCVlYlFGiaoCwve5O33rseqreErEaY+Hd89Ow/dtBdhbzWYMuszoYXrwdvvNeD874gBKcB DkUJziUgJ+D1IOJ7Z6DhiCTFfy+Qf3XVxAteeq/4LTgVdkD25YX0lzNBpeRyBniDMDYzYGcw S9pRQToAIJDPlnoOOF/K70MvS3MYdvAcw+dF0YDMQ27OmgIm+B3YNPHnEB9sRA9YEmatxmdw SGBci6CEqFiUGE4OZoAXcyYnYRfd5auXb1jzuM32zTYnlOxAjJFCZA+L35P9NsMNW7QIYs8p A0eH4K+XOM6a8inDVKb5YMZb6BbZ54YQbe02wD7wmegwYTTHUw1EGYRZ2VGAyHm5yBPJmklv cjX2BkOvPxoNR2LKfUPuPuOHL2YewkTTZg9OWe+1NwD12AEn4cc/JnC8gpQCPXnIIfKT10eI bOrPIwhdD0PEsLHHkBv2dhvxvfild24hC7w9hTiNvpY1i+gvDvQ3QTItw0j4YzvSGCN5ki5u ZhDTIKlfUjSwpC3UATDehN3F0HvXf2ehB7AKEE4zCdsMEu0VBJPw8AUJ/xQ3CBdZVQvUhK8i AVm/gGNRQHEUoNjo01kUENudHoEuSqlT+J6U4mlFeArzuqlrtEhaWpHCyRlWeJDyHhTw4xQk WvOoxR4p4Ap1oDeAo1XzESw7fAE/CJ22hZqHTuPD0R9qLObJTTlrGdJ4LE5e9by1FCES5wJJ CQYlQBKzmAeCu5JNQRkDAYfHWsr8UwkDridkzt/wGF2K4l8muAS6kuknhNyzCnLGyaB98dA1 /BqxvhkOX3Ub97W+EvxjwgNCiTVtbwdWfOt4xqq8cDOC9D7NQ5XzUYTUTwZJVHojjolrjj/1 A7E5K+hXdfqfMPnPrspnJmeXoJev+ue935BVeP5BVSFG418xZJaK9SoSWoyz6DthDzPiFVLW Va4P/ljR3K3+z4H6FQ6wZtMv9NoEQSgdCgadTg3QNhsPz34GMKN+7x24JO1o9PKfYHAHGqc+ HA9CpC29xjOZ3vRh
[sane-devel] [dev] net backend and timing problems? (pretty weird)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! ~From the debug output Michael send me, I assume that the bug isn't in the net backend. The data pipe is closed correctly and the sigpipe occurs on the control pipe. Why this doesn't happen with a delay of some seconds isn't clear to me. Anyways, I'd like to use the new net backend version, because it has much more debug output and fixes some minor bugs. I've tested it, Michael tested it. Could some more people test it before it's committed to cvs? I'm adding debug output to the sanei_wire interface at the moment and already stumbled over a serious bug... in sanei_w_space memcpy is used although the areas copied may overlap (which may result in data corruption). regards - - -- jochen Jochen Eisinger wrote: | -BEGIN PGP SIGNED MESSAGE- | Hash: SHA1 | | Hi! | | The problem here is, my net backend just doesn't crash, no matter what i | do :( | | | I'd say this is the old "scan over localhost" problem. Anyway, I've | rewritten parts of the net backend (basically adding lot's of DBG, some | checks again NULL pointers and I've changed parts of the auth functions | to avoid information leaks) | | Please try this backend with SANE_DEBUG_NET=128 and send me the output... | | regards | - -- jochen | | mh wrote: | | mh, Fre, 07 Sep 2001: | | ... | | | |>BTW, maybe someone else with the same problem can try to add a sleep() | too? | |>AFAIR, there were a couple of reports about problems with the net | backend/saned | |>on the localhost. | |> | | | | Just some additional infos: (I hope, this doesn't get boring) | | I've just made some modifications in the net backend (net.c): | | I've replaced all calls to do_cancel(s) in the function sane_read() with | | calls to sane_cancel(s) . | | Now the net backend works just fine (at least on the localhost). I did | 500 | | scans with the pnm backend and 50 with my Plustek (using quiteinsane). | There | | wasn't a single problem. The other frontends work without problems too. | | Any explanation for this ? | | | | Michael | | ___ | | Sane-devel mailing list | | sane-de...@www.mostang.com | | http://www.mostang.com/mailman/listinfo/sane-devel | | | | | - -- | ~ [This is a signature virus, please copy me into your signature file!] | | ~ GnuGP public key for jochen.eisin...@gmx.de: | ~ http://home.nexgo.de/jochen.eisinger/pubkey.asc | -BEGIN PGP SIGNATURE- | Version: GnuPG v1.0.6 (GNU/Linux) | Comment: For info see http://www.gnupg.org | | iD8DBQE7mWxW8OF76YrreuMRAo7bAJ4yKLu/RkO15GyrX7/tpSVCmEIAvACgy5y4 | 3Sck7rzVEK/mZKsu1kvk8jo= | =2eZe | -END PGP SIGNATURE- | net.c.gz | | Content-Type: | | application/octet-stream | Content-Encoding: | | base64 | | - -- ~ [This is a signature virus, please copy me into your signature file!] ~ GnuGP public key for jochen.eisin...@gmx.de: ~ http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7mi/a8OF76YrreuMRAunTAJwIkJPEzJoYbEGsaNVNQddf9yN0ngCglHcT k1khOi6A+31HaDGDe78GdKQ= =XaDM -END PGP SIGNATURE-
[sane-devel] [dev] net backend and timing problems? (pretty weird)
This is a multi-part message in MIME format. --080801080505050209070105 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! Ok, here we go... a modified version of sanei_wire.c. Could please try this one? with sane_debug_sanei_wire=4... regards - -- jochen Jochen Eisinger wrote: | -BEGIN PGP SIGNED MESSAGE- | Hash: SHA1 | | Hi! | | The problem here is, my net backend just doesn't crash, no matter what i | do :( | | | I'd say this is the old "scan over localhost" problem. Anyway, I've | rewritten parts of the net backend (basically adding lot's of DBG, some | checks again NULL pointers and I've changed parts of the auth functions | to avoid information leaks) | | Please try this backend with SANE_DEBUG_NET=128 and send me the output... | | regards | - -- jochen | | mh wrote: | | mh, Fre, 07 Sep 2001: | | ... | | | |>BTW, maybe someone else with the same problem can try to add a sleep() | too? | |>AFAIR, there were a couple of reports about problems with the net | backend/saned | |>on the localhost. | |> | | | | Just some additional infos: (I hope, this doesn't get boring) | | I've just made some modifications in the net backend (net.c): | | I've replaced all calls to do_cancel(s) in the function sane_read() with | | calls to sane_cancel(s) . | | Now the net backend works just fine (at least on the localhost). I did | 500 | | scans with the pnm backend and 50 with my Plustek (using quiteinsane). | There | | wasn't a single problem. The other frontends work without problems too. | | Any explanation for this ? | | | | Michael | | ___ | | Sane-devel mailing list | | sane-de...@www.mostang.com | | http://www.mostang.com/mailman/listinfo/sane-devel | | | | | - -- | ~ [This is a signature virus, please copy me into your signature file!] | | ~ GnuGP public key for jochen.eisin...@gmx.de: | ~ http://home.nexgo.de/jochen.eisinger/pubkey.asc | -BEGIN PGP SIGNATURE- | Version: GnuPG v1.0.6 (GNU/Linux) | Comment: For info see http://www.gnupg.org | | iD8DBQE7mWxW8OF76YrreuMRAo7bAJ4yKLu/RkO15GyrX7/tpSVCmEIAvACgy5y4 | 3Sck7rzVEK/mZKsu1kvk8jo= | =2eZe | -END PGP SIGNATURE- | net.c.gz | | Content-Type: | | application/octet-stream | Content-Encoding: | | base64 | | - -- ~ [This is a signature virus, please copy me into your signature file!] ~ GnuGP public key for jochen.eisin...@gmx.de: ~ http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7mk8j8OF76YrreuMRAgzAAKCPkbr1JNzaXBo76TmP7A7if5TfxgCdFCkk 2MBoDYhItSe+NqvU1c6ep+E= =lqOY -END PGP SIGNATURE- --080801080505050209070105 Content-Type: application/octet-stream; name="sanei_wire.c.gz" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="sanei_wire.c.gz" H4sIACZOmjsCA81beXPaSBb/G3+KTraSBYeAnczWbEycLWLjDLUOTtl4sqndLUqWGlCNkJiW BGFS+e77jpbUujA4M7OZ8tjQxzt+7+jXR7qHIrR8KZ6LG9vyfalE37ZlGIpRsBYDK9x0DoQQ Z8Fyo9zZPBLNs5Y4fvXqR3FurVxHvA/CO6lmUj0fW/4Mh47nbiimricF/F1aKhLBVERzKW76 owE02L9YM9k5SIcuVTBT1gJHT5WUIgym0dpSsic2QSxAJqGk44aRcu/iCIhGwvKdbqCQwCJw 3OkG22LfAdGRTSTVIkx4vhvdincStLI88SG+81xbXLq29EMprBApLLExnEtH3G1oxgXKcKNl EBcBELYiN/B7QrrQr8RKqhC+ixeaB1LRNNsiUKJpRSi5EsES57VA3I3wrCibWq18pqMjXJ9k mQdL0GcOBEHDtet54k6KOJTT2GsLGIlkPg7HP13djkV/9El87F9f90fjTz0YHM2DOBJyJZmU u1h6LlAGrZTlRxsQHme/H1yf/QRT+m+Hl8PxJ5T/YjgeDW5uxMXVteiLD/3r8fDs9rJ/LT7c Xn+4uhl0hLiRMkEXidQAPAViiwBAdGRkuV7Ian8Co4Ygm+eIubWSYFxbuiuQzBI2ONn9hkMi lhf4M1ISBmcw9oQ7FX4QtcVaueArUVA2KU7PrNoWQ9/utMXfXomxBIik+OBZNkVDjBRevjxq i7dBGMFQwqsvjl4cHx8/P3559GNb3N70Wat+CPKHS2m7IK/8bMslU0f2Vgy2UOSSFAIzUFcs wUvdkBxpyr5sOY6Lk4AAmDj1YM+9U5ZyocEOfMDRT9wD1FbSkxYgrSknfiUzCdCx0IHaiAzG k+f6v4CoJAiT3jCOATk3xi3FBUAHoDoxYAERKD9LO46sO0+2mbMTgECANEaNG4XSm0KkgthJ QCgZxl7kgpGyqUgT/NcOIAyyeCsb2gioDvmLQkAYDwgFgyAIAlD4AXj1BllC/NgYPoFPgNo2 2JnSD2qNwqRpKFHdDhwg44NkbmSEZYZfomgbgnEN0aQASX9leS74j6TQZuAUGCLwQ7Gebwg+ MkIqKKXDBeXPfREgoYZsvDC+W0AmsOeQakEskJqU0W6+AOcgB1Ghhtr1bS92yGEIECQQyl9j Caho32kTYWuGIQLyMIcowSrlBMCzWkGYtS4AdeBiJq4sJA0XBKnsKKcIhydlb9emQCR/57S5 ppAg1dqY+IAYddjzADBBKuu5JNDRSTGOoiJL6LCWS2+DH2hujlXHkMQJyI3XsAboQHEAGMwd eYowCJiDPx52Dw7+ooEVjzudrv7cxVW0CzE6dWed+WNj0GuplB905m+MpjBywAWLbQpwxzaz cRN2o81Shvn2EmP8hWy3j3Ana1dJFs+RU/AV8bZ/9s/B6Hwy6r8fNLIx9xK6g4Vc+g7RWgWu c6DnTsIlJtDmRyAiDsW6LUL3NzmJMH4WsT1vHXwB+HWbf7eJZNgWnpxGE4yKHvSBv4ipI07F +vkbN+hMHWwMkxkQaE5b+OhBkfR76FXnb9+J5su2eJwT4UQ8wRAD+uROqBS0/Md/3E5EaQOb FlGA5NjUjeIN8r2Lp1OpOsi0hd7CPF60DxolLuQo68D/K0iN3srrLRPABAG5KRQnTdHpdCDy cd2DmJl6cThvtjCg4tkchMrkAO5hZEVxKB6diiPm/oV+aymOy5qScpwNdXYSSCNVOKXZ6mlK Skax8vnbV4O1VtyOlRLPRBUmYPQKoX4oC0XVnMYBgUQBWR5AUeQpwoKbZ54KGkJKAQlQNge0 tKmmOmh8OWjYuPR9HF4PJoPR2dX54ATJskex85i6mPQBChX1cHRh0GnloDr9QpAbE2XiZoQ0 828x9Tmm
[sane-devel] [dev] net backend and timing problems? (pretty weird)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! Hum... if you have the time, could you send me the debug output from my new net.c when crashing due the option changes, and the debug output from my new sanei_wire with the old net backend (while probably crashing after a preview) regards - -- jochen mh wrote: | Jochen Eisinger, Sam, 08 Sep 2001: | |>Hi! |> |>~From the debug output Michael send me, I assume that the bug isn't in |>the net backend. The data pipe is closed correctly and the sigpipe |>occurs on the control pipe. Why this doesn't happen with a delay of some |>seconds isn't clear to me. |> |>Anyways, I'd like to use the new net backend version, because it has |>much more debug output and fixes some minor bugs. I've tested it, |>Michael tested it. Could some more people test it before it's committed |>to cvs? |> |>I'm adding debug output to the sanei_wire interface at the moment and |>already stumbled over a serious bug... in sanei_w_space memcpy is used |>although the areas copied may overlap (which may result in data corruption). |> | | This should really be tested by others; I just discovered, that your modified | version of net.c introduces some new problems (at least for me). When I try to | change the scan mode (plustek backend) from e.g. "Color" to "Gray", xsane and | xscanimage segfault :-( | The same happens, if I set the options "Grayify", "Three-Pass Simulation" or | "Hand-Scanner Simulation" with the pnm backend. | For some unknown reason, quiteinsane doesn't crash. | | Michael | | Some reading for this long and rainy weekend follows (xscanimages reaction after | trying to change the scanmode :'-( ): | | Program received signal SIGSEGV, Segmentation fault. | panel_destroy (dialog=0x80b2c30) at gtkglue.c:833 | 833 gtkglue.c: Datei oder Verzeichnis nicht gefunden. | (gdb) bt | #0 panel_destroy (dialog=0x80b2c30) at gtkglue.c:833 | #1 0x8058b43 in panel_rebuild (dialog=0x80b2c30) at gtkglue.c:1181 | #2 0x80565fa in set_option (dialog=0x80b2c30, opt_num=2, val=0x80b2690, | action=SANE_ACTION_SET_VALUE) at gtkglue.c:201 | #3 0x80573fb in option_menu_callback (widget=0x80b04cc, data=0x80b3228) | at gtkglue.c:568 | #4 0x400b3e93 in gtk_marshal_NONE__NONE () at gtkmarshal.c:124 | #5 0x400e4ce8 in gtk_handlers_run (handlers=0x80a29a0, signal=0xbfffefc8, | object=0x80b04cc, params=0xb01c, after=0) at gtksignal.c:1917 | #6 0x400e40bf in gtk_signal_real_emit (object=0x80b04cc, signal_id=75, | params=0xb01c) at gtksignal.c:1477 | #7 0x400e2017 in gtk_signal_emit () at gtksignal.c:234 | #8 0x4011aacf in gtk_widget_activate () at gtkwidget.c:2707 | #9 0x400bbe7c in gtk_menu_shell_activate_item () at gtkmenushell.c:771 | ___ | Sane-devel mailing list | sane-de...@www.mostang.com | http://www.mostang.com/mailman/listinfo/sane-devel | - -- ~ [This is a signature virus, please copy me into your signature file!] ~ GnuGP public key for jochen.eisin...@gmx.de: ~ http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7mmOT8OF76YrreuMRAg0FAJ9SwUzHRUYMf9nCk8VMlV8/T9YEYQCffsqz wlPtMRyiR+mDLxkBK03LWYQ= =R55N -END PGP SIGNATURE-
[sane-devel] HP Scanjet 2200c project
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! There appears to be a group working on a driver for HP Scanjet 2200c project. I've added a pointer to scanjet2200c.sourceforge.net to PROJECTS. regards - -- jochen - -- "I'd rather die before using Micro$oft Word" -- Donald E. Knuth (asked whether he'd reinvent TeX in the light of M$ Word) GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7xhsa8OF76YrreuMRAtxSAJ0ZHZ4WbPxfL2Uq6bVkt4kUbXx4ywCeMenV +KwEa1N9tXfZ5ymerqIBkwk= =t9/t -END PGP SIGNATURE-
[sane-devel] saned hostname authentification
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! Henning Meier-Geinitz wrote: > The question is: Is it intended behavour that only fully qualified > domain names are allowed in saned.conf? If yes, we should note this in > man saned. Otherwise, I think a change in saned.c is necessary. I think this is the intended behaviour. :) I encountered similar problems with the new resolver library (which comes for example with debian/sid). However, I haven't tested this with saned yet. regards - -- jochen - -- "I'd rather die before using Micro$oft Word" -- Donald E. Knuth (asked whether he'd reinvent TeX in the light of M$ Word) GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7yWi/8OF76YrreuMRAmYzAKC8YQ2IDQGaytzH19s8v3rnCP7BXQCgxnLa GgKTZVMtgk3IWPqO4d8a4jY= =Mdbf -END PGP SIGNATURE-
[sane-devel] Brand-Newbie question
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! Jim George wrote: > I've just installed sane with the mustek_pp backend. > > I had no /dev/scanner entry in my /dev directory therefore, after much > scrabbling around and guessing, I created a symbolic link from /dev/lp0 to > /dev/scanner. the mustek_pp backend doesn't support devices yet, you have to specify the port number of your parallel port in /etc/sane.d/mustek_pp.conf (or /usr/local/etc/sane.d/mustek_pp.conf depending on your installation) > > I chose /dev/lp0 as this is the entry in /etc/printcap that equates to > the lp printer, and my mustek 1200cp scanner (CIS chipset with the > software patch from Eddy DeGreef) shares that port. > > I edited /etc/sane.d/dll.conf and removed the comment in front of > mustek_pp. > > I edited /etc/sane.d/mustek_pp.conf and changed the port to 0x3bc as per > the instrcutions in that file. > > My problem is that when I run xsane I get the message 'no devices > available'. I've tried specifying mustek_pp:/dev/scanner and > mustek_pp:/dev/lp0 (and 1). But all of these fail. In the file mustek_pp.conf you've also specified the name for the scanner, which you want to use, for example "name SM-1200CP", then you have to use the device mustek_pp:SM-12000CP. Furthermore, you can only access the scanner as root. To allow users to scan, you have to setup the SANE Network Scanner daemon. Descriptions of how to do this can be found in the man-pages saned, sane-net & sane-mustek_pp or on the web-page http://home.nexgo.de/jochen.eisinger/saned/ regards -- jochen > > Can someone tell me what I've done wrong, or have missed? > > Thanks in advance, > > > Jim > ___ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel > - -- "I'd rather die before using Micro$oft Word" -- Donald E. Knuth (asked whether he'd reinvent TeX in the light of M$ Word) GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7yYVg8OF76YrreuMRAnDCAJ0XRApILnKE6CZh8Z6buu6SHYbRMQCggfZb RXTFqfG0rOvv3K7LO4bQoJk= =Y+Ck -END PGP SIGNATURE-
[sane-devel] Brand-Newbie question
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! Jim George wrote: > # specify the port your scanner is connected to. Possible are 0x378 (lp1) > # 0x278 (lp2) and 0x3bc (lp0) > port 0x3bc Well, that's an old problem with kernel 2.2.x -> 2.4.x... reminds me I should add this to the config-examples. In 2.2.x (before parport) the names for the ports where fixed. Now with parport, the names are just aliases, and normally, lp0 is assigned to the first available port (normally 0x378)... this is btw explained in the man page sane-mustek_pp I'd recommend to read :) so try port 0x378 instead... regards - -- jochen - -- "I'd rather die before using Micro$oft Word" -- Donald E. Knuth (asked whether he'd reinvent TeX in the light of M$ Word) GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7ybU78OF76YrreuMRAuxVAKD3Xjj1pzD4RsKszkDaoemXlPuTRACgnb6x gXFUvW+8om5ZwxI20COhNII= =mkc1 -END PGP SIGNATURE-
[sane-devel] Mustek_PP Godd news, better news, bad news
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! Does this also happen with plain scanimage on your scanner server (as root)? Could you put somewhere on he internet such a scanned image and the output of SANE_DEBUG_MUSTEK_PP=128 scanimage -T (assuming you're using bash) regards - -- jochen Jim George wrote: | Folks, | | I'm not sure what to think. | | I've got my Mustek_PP 1200CP working on all my Linux clients to my Linux | Server...Good News or what? | I've got my Mustek_PP 1200CP working from my Windows client (using | Xsane-WIN32) to my Linux ServerBetter News or what? | The problem is that all instances of scanning miss the last 1/4 of the | vertical page. No matter what I do or where I position the damn paper I | miss the rightmost 1/4 of the page.Bad News or what? | | | Can someone tell me what I'm doing wrong? | | TIA, | | Jim | | p.s. I realise having written this letter that it looks somewhat | big-headed to claim 'I've got my...', when in fact it was you guys who | wrote the software. | | | | | ___ | Sane-devel mailing list | sane-de...@www.mostang.com | http://www.mostang.com/mailman/listinfo/sane-devel | - -- ~ "I'd rather die before using Micro$oft Word" ~-- Donald E. Knuth ~ (asked whether he'd reinvent TeX in the light of M$ Word) ~ ~ GnuGP public key for jochen.eisin...@gmx.de: ~ http://home.nexgo.de/jochen.eisinger/pubkey.asc (0x8AEB7AE3) -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE79UJU8OF76YrreuMRAkSPAJ0QaYi8WGL6k0M0oh80/p1wbbNdvwCgvl5t CD7sz/gkcnQsc+eHsfUqONs= =9Syh -END PGP SIGNATURE-
[sane-devel] Mustek_PP Godd news, better news, bad news
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! The mustek_pp backend wasn't changed between 1.0.5 and 1.0.6, so this shouldn't do much. From the output you've send, everything should work. So again my questions, does scanning work when done locally by root using scanimage (i.e. without saned/net)? regards - -- jochen Jim George wrote: | I'm running sane 1.05. Do you believe that an upgrade will cure the | problem, or are you recommending that purely so that I'm up with the | latest release? | - -- ~ "I'd rather die before using Micro$oft Word" ~-- Donald E. Knuth ~ (asked whether he'd reinvent TeX in the light of M$ Word) ~ ~ GnuGP public key for jochen.eisin...@gmx.de: ~ http://home.nexgo.de/jochen.eisinger/pubkey.asc (0x8AEB7AE3) -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE79lzH8OF76YrreuMRAqsuAKDvMXLpZcqNWWBnawQQlejGBbEkHwCg8ool on4+wHcXWJ3b3r+Iz3Srasw= =QH/1 -END PGP SIGNATURE-
[sane-devel] Mustek_PP Godd news, better news, bad news
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! Jim George wrote: | Something has gone wrong now. When I issue the command scanimage > | out.pnm, as myself or root on the server, it scans but then stops with | no error messages at all. The only way I can kill I can return to the | prompt is with kill -9. Please do this with SANE_DEBUG_MUSTEK_PP=128... and does out.pnm contain any data? regards - -- jochen - -- ~ "I'd rather die before using Micro$oft Word" ~-- Donald E. Knuth ~ (asked whether he'd reinvent TeX in the light of M$ Word) ~ ~ GnuGP public key for jochen.eisin...@gmx.de: ~ http://home.nexgo.de/jochen.eisinger/pubkey.asc (0x8AEB7AE3) -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7+qrJ8OF76YrreuMRAloaAJ9RFQ5/XNqb+cDjtPlKu0BGhIHlywCfUczo fb3iFK9UN8G2tsUydSByTCU= =o1Ib -END PGP SIGNATURE-
[sane-devel] Mustek_PP Good news, better news, bad news
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! Sorry, for the long delay, I haven't been online for some days... Jim George wrote: | Jochen, and anyone else who wants to chip in here...I hope the following | makes sense and helps in the resolution of this problem. You still have not send the data I've requested, so I still can't help you... I need the output of scanimage with SANE_DEBUG_MUSTEK_PP=128 while scanning. the complete output. regards - -- jochen - -- ~ "I'd rather die before using Micro$oft Word" ~-- Donald E. Knuth ~ (asked whether he'd reinvent TeX in the light of M$ Word) ~ ~ GnuGP public key for jochen.eisin...@gmx.de: ~ http://home.nexgo.de/jochen.eisinger/pubkey.asc (0x8AEB7AE3) -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE8Au/Q8OF76YrreuMRAqQIAKDCs+Ri63EwtmqBRuqbeM6ztbp+oQCfcIXm 2V1B63bheSjgqZlFl3oEbng= =ZGKf -END PGP SIGNATURE-
[sane-devel] RH 7.0 sane and Mustek 600 III EP Plus
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! Sorry for the late reply, they don't have decent Internet access here at the north-sea beach... :P I'm glad to read that the problem is already solved. [Henning Meier-Geinitz] > > When i get it going ill write a simple Mustek 600 how-to > > so if anything like this hits someone else they will have a few good > > pointers. > > I'm sure Jochen Eisinger will update the manual page and website, if > there is something he has forgotten to mention. Yep, please let me know. I appreciate such help very much. regards - -- jochen - -- falsie salesman, n: Fuller bust man. [This is a signature virus, please copy me into your signature file!] GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: Weitere Infos: siehe http://www.gnupg.org iD8DBQE7ZETA8OF76YrreuMRAvA+AJ9oNLSvPfj6MNQvDQ3ckZbLyr/G+wCgjQip h7jIElqSyWIlR1Qzm8v7W0E= =LjZ1 -END PGP SIGNATURE-
[sane-devel] Parallel as non root
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! The solution to your problem is the SANE network daemon saned. You can install saned who is running as root (yes, the man-page says, this isn't recommended) and allow users to access to scanner over TCP. Please see the man-pages saned, sane-net and sane-mustek_pp for hints how to setup this. Information about user authentication with passwords is provided in the man-pages saned and scanimage. regards - -- jochen [Richard] > Good evening > > I thought i had it made. > Xsane recognised the scanner and i was in business..so i thought. > > In the archives there is a letter addressing just that. > http://www.mostang.com/mail-archive/sane-devel/2001-01/0195.html > > I changed owner and chmod the files as suggested. > Then when i tested SANE_DEBUG_MUSTEK_PP=255 xsane in non root mode > i had a surprise. > > Gtk-WARNING **: This process is currently running setuid or setgid. > This is not a supported use of GTK+. You must create a helper > program instead. For further details, see: > > http://www.gtk.org/setuid.html > > Refusing to initialize GTK+. > > Running xsane by itself also returns this unpleasant warning. > > So where do i go from now ? > Is this fixed in the new sane 1.0.5 ? Will a new frontend fix this ? > > Sincere thanks > > Richard Hebert > > _ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > ___ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel > - -- More people are flattered into virtue than bullied out of vice. -- R.S. Surtees [This is a signature virus, please copy me into your signature file!] GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: Weitere Infos: siehe http://www.gnupg.org iD4DBQE7ZrBh8OF76YrreuMRAr/PAKDgDy6Yc3xsZd/y7Iz1ZZEgs4OO3gCXc9D0 XPqlzkUZCBDWwFVSRO6vdg== =uV9s -END PGP SIGNATURE-
[sane-devel] network scanner problems
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi!
Does network scanning work with scanimage and/or xsane?
Here it works also with xscanimage...
regards
- -- jochen
[Guido Socher]
> Has anybody seen the following problem with the net backend
> in sane 1.0.5?
>
> The xscanimage program crashes because it tries to write
> data to a closed connection.
> The connection is closed in the sane_read() function in
> net.c because it executes this code:
> if (s->bytes_remaining == (size_t) - 1)
> {
> char ch;
>
> /* turn off non-blocking I/O (s->data will be closed anyhow): */
> fcntl (s->data, F_SETFL, 0);
>
> /* read the status byte: */
> if (read (s->data, &ch, sizeof (ch)) != 1)
> ch = SANE_STATUS_IO_ERROR;
> do_cancel (s);
> return (SANE_Status) ch;
> }
>
> That is s->bytes_remaining is -1 and then do_cancel(s) is
> called which closes the connection.
> Next xscanimage (ignoring the closed connection) tries
> to set some control options using this
> closed connection and that is where the sigpipe is received.
>
> The interessting thing is that the scan as such is ok, i.e I can
> see the full picture in the preview for a second.
>
> I have the feeling that the -1 record length is used as a special
> value to signal the end of the scan and unfortunately net.c
> thinks that this is an error. Is that possible?
>
> It think that is is the case because scanning directly without
> the network inbetween works perfectly.
>
> Anybody who managed to get the network scan backend to work in
> 1.0.5?
>
> Here the crash:
> Program received signal SIGPIPE, Broken pipe.
> 0x4042e584 in write () from /lib/libc.so.6
> (gdb) backtrace
> #0 0x4042e584 in write () from /lib/libc.so.6
> #1 0x0020 in ?? ()
> #2 0x080564bc in flush (w=0x80739fc) at sanei_wire.c:404
> #3 0x080564f4 in sanei_w_set_dir (w=0x80739fc, dir=WIRE_DECODE)
> at sanei_wire.c:413
> #4 0x08056557 in sanei_w_call (w=0x80739fc, procnum=5,
> w_arg=0x4001a8e0 , arg=0xbfffd560,
> w_reply=0x4001a960 , reply=0xbfffd540)
> at sanei_wire.c:432
> #5 0x400194cf in sane_net_control_option (handle=0x80cc488, option=22,
> action=SANE_ACTION_SET_VALUE, value=0xbfffd758, info=0x0) at net.c:806
> #6 0x4031b991 in sane_dll_control_option (handle=0x80cc4b8, option=22,
> action=SANE_ACTION_SET_VALUE, value=0xbfffd758, info=0x0) at dll.c:846
> #7 0x4031bc2d in sane_control_option (h=0x80cc4b8, opt=22,
> act=SANE_ACTION_SET_VALUE, val=0xbfffd758, info=0x0) at dll-s.c:34
> #8 0x08050bd0 in restore_option (p=0x80df848, option=22, saved_value=0,
> valid=1) at preview.c:453
> #9 0x0805135c in scan_done (p=0x80df848) at preview.c:702
> #10 0x08051269 in input_available (data=0x80df848, source=10,
> cond=GDK_INPUT_READ) at preview.c:543
> (gdb)
>
> And here the debug sequence:
> sane_read: max_length = 8192
> sane_read: max_length = 8192
> sane_read: max_length = 8192
> sane_read: max_length = 8192
> sane_read: next record length=4088 bytes
> sane_read: max_length = 8192
> sane_read: next record length=8 bytes
> sane_read: max_length = 8192
> sane_read: next record length=4096 bytes
> sane_read: max_length = 8192
> sane_read: next record length=4076 bytes
> sane_read: max_length = 8192
> sane_read: next record length=20 bytes
> sane_read: max_length = 8192
> sane_read: next record length=4096 bytes
> sane_read: max_length = 8192
> sane_read: next record length=3725 bytes
> sane_read: max_length = 8192
> sane_read: max_length = 8192
> sane_read: next record length=-1 bytes
> sane_cancel
> sane_control_option: option 4, action 1
> sane_get_option_descriptor: option 4
> sane_control_option: option 22, action 1
> Broken pipe
> Exit 141
>
>
- --
Reality is bad enough, why should I tell the truth?
-- Patrick Sky
[This is a signature virus, please copy me into your signature file!]
GnuGP public key for jochen.eisin...@gmx.de:
http://home.nexgo.de/jochen.eisinger/pubkey.asc
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: Weitere Infos: siehe http://www.gnupg.org
iD8DBQE7cFQE8OF76YrreuMRAhnVAKDJlLe3Sqt5S1UtJGeIJ8eDdu1bgACfcFmA
an3k9ycKvf2BrdDP/GOlzCA=
=0Vyn
-END PGP SIGNATURE-
[sane-devel] Non root users
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi!
[G. L. `Griz' Inabnit]
> Good day,
>
> I recently aquired a Mustek 6000 III EP Plus parelell port scanner. As
> root,
> it works wonderfully.
>
> SYS INFO:
>
> Debian UNSTABLE (SID)
>
> libsane1.0.4-2API library for scanners
> sane 1.0.4-1Scanner graphical front-ends
> xsane 0.70-1 a gtk based X11 frontend for SANE (Scanner A
> xbase-clients 4.1.0-2miscellaneous X clients
>
> Athlon 850 Tbird
> 1.5 gig ram
> Abit KT7A-Raid
> Printer port set to EPP in CMOS
>
> /etc/inetd.conf line;
> sanestream tcp nowait saned.saned /usr/sbin/saned
> saned
you have to run saned as root (although not recommende in the man-page).
just replace saned.saned by root.root.
> I fought with the setup/install of this poor flatbed for hours and
> hours.
> Trying multiple variations of this-that-and-the-other-thing. Nothing seemed
> to work. But when I did a 'scanimage --list-devices' as root, sure enough it
> was there (I had su'd to root in an xterm to do this). I could not figure out
> what the complaint was with xsane other than being told that no devices
> existed for use. The scanner was seen, id'd, and said to be working, yet when
> I called xsane as a user (griz), I was told there where no scanning devices.
> Accidently, I started 'xsane' in the xterm that I had su'd to root in.
> PRESTO!! It not only came up and ran (after the bitchbox)!! Also,it beat the
> hell outta the speed it ever had in Windon't (BravoZulu people!!). So, then I
> tried it as a user again. Nothing. (sigh)
> So, onto Google. Do a search for 'xsane mail list'. Bang! There is one!
> Fantastic!! They have an archive. Life IS Good! Search the archive. Find two
> messages, one from Richard (CC: above)
> {http://www.mostang.com/pipermail/sane-devel/2001-July/79.html}
> and another from jochen
> {http://www.mostang.com/pipermail/sane-devel/2001-July/82.html} stating
> that the sane.d server would cure the problem.
> Uh, it didn't. :--) Although I'm not honestly sure I've set it up
> correctly, nor do I know how to assertain if the daemon is actually running.
>
> 1.Which device is this scanner connected to? I do not have anything in
> /dev
> that screams out "I'm the scanner!" and I don't see anything in
> /var/log/messages (nor dmesg | less).
the scanner is not attached to a device, the driver accesses it directly.
>
> 2.How can I reconfigure the machine so that regular users have access to
> the
> scanner, software, use w/o su'ing to root?
run saned as root, use passwords to protect the service (see man saned,
man sane-net & man scanimage)
>
> 3.Are there any log files for sane/xsane? I do not find anything in /var
> or
> anywhere else to speak of.
if you run saned from the command line with option -d128 you'll get debug
output.
>
> At this time I'm fairly sure it's a simple permissions issue, but I've
> yet
> to discover WHICH packages needed corrected or which device I may need access
> to.
>
> Please keep Richard included on any responces to me, please. As we are
> working on this together. And if there is any other System Info (e.g versions
> of software, hardware info, log files, etc) required, just let me know and
> it will be included on the next mailing to the list.
>
>
> Respectfully,
>
>
> Griz
>
>
regards
- -- jochen
- --
Things are more like they used to be than they are now.
[This is a signature virus, please copy me into your signature file!]
GnuGP public key for jochen.eisin...@gmx.de:
http://home.nexgo.de/jochen.eisinger/pubkey.asc
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: Weitere Infos: siehe http://www.gnupg.org
iD8DBQE7c/zg8OF76YrreuMRAq66AJ9n9z8jAnLsi3yb44gf4Cd6upX5cwCg8qYI
0zuZJeu7ghpWEzg7gFjWSCk=
=Xlj4
-END PGP SIGNATURE-
[sane-devel] saned to solve root issue ?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! [Richard] > Well it's been a while since i wrote and yet i havent had any > success using xsane as non root. > > Im no programmer but i gave it a good shot. > > It semed if i had understood well i had to set saned to run as root. > but then two things pop to mind > > 1 - Ok first is easy it's how to set saned to run as root >( im an incompetent ..im still trying to figure how to make saned > eun always as root ) that's the solution. replace saned.saned in /etc/inetd.conf by root.root > > 2 - Second once it's set how do i use the saned daemon ,how do i call it ? see the man page saned and sane-net for a detailed description > > Keep in mind im no programmer but a simple folk trying to have his > scanner work so i can scan the wife's family photos to put into her > family tree.. > > PS as ROOT user i used GIMP and bingo ..it works beautifully > but like Griz mentioned it would be way better to use both as non root. > > And Griz dont despair ..there is no actual device .it's a " virtual device > " > if i understood correctly , so we did not find any devices to chmod , > there aint one.. > : ) > > So if anyone can help clarify this both of us would greatly appreciate > > Thank you for your patience. > Merry Christmas > > Richard > regards - -- jochen - -- Cats are smarter than dogs. You can't make eight cats pull a sled through the snow. [This is a signature virus, please copy me into your signature file!] GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: Weitere Infos: siehe http://www.gnupg.org iD8DBQE7c/208OF76YrreuMRAkelAKCi7xwhh7qHTAs2EoSoDvlG9cOfvwCfR85b KE+qYf6nYuarHceEWtmF9JU= =h7ZY -END PGP SIGNATURE-
[sane-devel] Non root users
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! [G. L. `Griz' Inabnit] > On Friday 10 August 2001 08:25, Jochen Eisinger wrote: > > Hi! > > > [snip] > > [/snip] > > > > > > /etc/inetd.conf line; > > > sanestream tcp nowait saned.saned /usr/sbin/saned > > > saned > > > > you have to run saned as root (although not recommende in the man-page). > > just replace saned.saned by root.root. > > > [snip] > > [/snip] > > > 2.How can I reconfigure the machine so that regular users have > > > access to > > > the scanner, software, use w/o su'ing to root? > > > > run saned as root, use passwords to protect the service (see man saned, > > man sane-net & man scanimage) > > > > > 3.Are there any log files for sane/xsane? I do not find anything > > > in /var > > > or anywhere else to speak of. > > > > if you run saned from the command line with option -d128 you'll get debug > > output. > > > [snip] > [/snip] > > And magic occured! > > Richard, this is for you. > > Edit the /etc/inetd.conf and make the required changes. > Edit the /etc/sane.d/net.conf and uncomment localhost > As root, killall -HUP inetd > As a user, run xsane > > BE AWARE THIS IS "NOT" SETUP WITH SECURITY IN MIND!! but it works, > wonderfully! :--) To add at least a little security, make use of user-authentication! saned supports a MD5 based challenge/response protocol. See man saned & man scanimage. XSane also supports that. regards - -- jochen > > - -- Everybody has something to conceal. -- Humphrey Bogart [This is a signature virus, please copy me into your signature file!] GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: Weitere Infos: siehe http://www.gnupg.org iD8DBQE7dGOW8OF76YrreuMRAhFYAKCO2krCPbGmFM0GJXWcRE+IC8uY2wCfV0AY BFdA4LtsRbNsfO8aKU9aEjI= =17av -END PGP SIGNATURE-
[sane-devel] Questions from new backend developers
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! [Tim Waugh] > > I'm not sure if this works for all the parport backends/drivers (e.g. > > sanei_ab306 or sanei_pa4s2). > > It would be great if someone could port this code into libieee1284 > so that other applications can benefit from it. Could somebody give me a pointer to libieee1284? if it works, I'll soon add support for it to sanei_pa4s2. A sanei_ieee1284 could be used to ensure, that the interface remains the same during development of that lib. regards - -- jochen > > Tim. > */ > - -- Everybody has something to conceal. -- Humphrey Bogart [This is a signature virus, please copy me into your signature file!] GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: Weitere Infos: siehe http://www.gnupg.org iD8DBQE7dGR88OF76YrreuMRAhguAJ9Ebmz0MH0IInk/2HQdJMyCjVn4aQCgg2fZ to77AiFdwmTwqBvv4xq+wc4= =zLva -END PGP SIGNATURE-
[sane-devel] saned
Hi!
> service sane
> {
> port= 6566
> socket_type = stream
> wait= no
> user= saned
> group = saned
> server = /usr/sbin/saned
> }
If you want to access pp scanners using saned, saned should run as user
root. If not, make sure, user/group saned exists.
> ouf ! : ) now GIMP still cant use the scanner.
>
> Where have i gone wrong ?
Maybe saned isn't started, you can test this by telneting the saned port:
# telnet localhost 6566
If the connection is refused, the xinetd config is wrong. If you can
connect, you can continue:
stop xinetd and start saned from the commandline:
# /etc/rc.d/init.d/xinetd stop (or something like that...)
# saned -d128
now you should get some debug output from saned (in your syslog there should
also be some interesting stuff)
Logged in as an user try this: (assuming you use bash)
$ SANE_DEBUG_NET=128 scanimage -L
Either this or the saned should now give you some further hints, where to
search for possible errors.
>
> I agree with the previous post there is a need for a simple 1,2,3 type
> step by step instruction for these scanners.
> I use mine in root mode for now cause i need to do this.
>
> An easy way to do this ( that dosent need the user be a programmer )
> is really needed.As Linux makes it's way in more and more desktops and
> " normal " users are getting Linux on their systems,i am under the
> impression
> that scanner documentation and software really needs be simplified to
> allow
> normal (read non programmers) users to successfully use their equipment.
Hu... I know. I'm working on it
regards
-- jochen
>
> Best regards
>
> Richard Hebert
>
>
> _
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net
[sane-devel] xinetd.conf add this to documentation .
Hi!
nice to hear that it's working...
> i found it ..and got it working .
> there was a } in xinetd.conf missing at the end.
> i modified it but i simply had not restarted xinetd.
>
> all works.
>
>
>
> But still a comment about xinetd
> the modification i made to the file works.
> I suggest this to be included in the documentation.
>
> ex
>
> Add to /etc/xinetd.conf the file following lines:
> service sane
> {
> socket_type = stream
> server = /usr/sbin/saned
> protocol = tcp
> user = root
> wait = no
> disable = no
> }
I'll note it... could you perhaps send me your xinetd config files?
regards
-- jochen
>
>
> best regards
>
> Richard
>
> _
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net
[sane-devel] xinetd.conf contents and file
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! Richard] > Jochen Eisinger wrote: > > I'll note it... could you perhaps send me your xinetd config files? > > Hello Jochen > > Sure can here is the content.The attachment is the config file itself.But with > viruses out there id understand you if you'd just delete it. thanks... but, you know, maybe I'm to dumb, but I just didn't succed in executing that wired attachment using pine... regards - -- jochen > > " i sent you this document for you to review i need your opinion " > : ) > > Richard Hebert - -- The Law of the Letter: The best way to inspire fresh thoughts is to seal the envelope. [This is a signature virus, please copy me into your signature file!] GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: Weitere Infos: siehe http://www.gnupg.org iD8DBQE7f7xY8OF76YrreuMRAnwKAJ9wbWRC1P3mniOZyVH1XDn0MCriIACfd0RV jTK0HSyudS5RwwujM0sYpSA= =3liI -END PGP SIGNATURE-
[sane-devel] xinetd.conf contents and file
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! [Richard] > On Sun, 19 Aug 2001 15:17:10 +0200 (CEST) > Jochen Eisinger wrote: > > > > thanks... but, you know, maybe I'm to dumb, but I just didn't succed in > > executing that wired attachment using pine... > > > > regards > > - -- jochen > > Did you get the necessary information or should i resend ? just joking... I got it, thanks: :P > And hopefully noone can't run a conf file.. : ) > I so agree that caution is the best medecine and that we're a bit > immune against email viruses but still in the last week i received more > than two dozens of those " sending for you to review " > type of attachments so i guess repeating here to be very careful about > like messages and attachments is a must. > > If you need info ,or me to resent the data just wave > ill be glad to give you a hand on this. > > If you plan a french translation of a user manual > or a how-to ill be glad to help. :D well... it would sure be nice to have a french translation, but first we'd need the user manual. Anyways, I'll let you know as soon as a new sane/net manual exists... regards - -- jochen > You guys have helped me a ton when i needed it.If i may id like > to return the favor. > > Best regards > > Richard > > _ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > ___ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel > - -- "Linux poses a real challenge for those with a taste for late-night hacking (and/or conversations with God)." (By Matt Welsh) [This is a signature virus, please copy me into your signature file!] GnuGP public key for jochen.eisin...@gmx.de: http://home.nexgo.de/jochen.eisinger/pubkey.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: Weitere Infos: siehe http://www.gnupg.org iD8DBQE7f8yV8OF76YrreuMRAsplAKC398+Da7Y9gOVzlDnE3u8KqRyRkwCgxfoz /XRvan/xz5JVH+X3sKwWtDc= =pytB -END PGP SIGNATURE-
[sane-devel] New SANE mailing list search-engine
Hi! From now on, the mailing list archive (both the old and the new) can be searched at http://sane.informatik.uni-freiburg.de/htdig/search.html. The search database is updated daily. The software is htdig 3.1.5 & apache 1.3 running on a SPARCStation-4 with Solaris 8 (just in case you're interested...) Thanks to the Chair for Computer Architecture (http://ira.informatik.uni-freiburg.de/) who provide both the hardware and the bandwidth the search engine is available again. regards -- jochen
[sane-devel] Forward: saned problems with xinetd
This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --enig42C0110941AE2353D253F8C6 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, could you send a tcpdump of the traffic between scanimage and saned? I don't have xinetd running, so it's hard to tell whether the config is right or not. However, it might help to add "protocol = tcp" to the sane block in xinetd.conf and/or "sane 6566/tcp" to /etc/services. There is a little page about saned at penguin-breeder.org/?page=sane-net btw. regards -- jochen Robert Kleemann wrote: > Summary: saned runs fine as a standalone server (saned -d128) but > fails when run from xinetd. -- ...and I doubt complaining to the author will get you anything but a free procmail rule. --enig42C0110941AE2353D253F8C6 Content-Type: application/pgp-signature -BEGIN PGP MESSAGE- Version: GnuPG v1.0.7 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE9iYJH8OF76YrreuMRAgaVAJ0cskGEPSlC6mWd9Uvn0uJPp8mMMQCfVNxC qazmJSM/Pc2kvbrutkBI1as= =3Gw2 -END PGP MESSAGE- --enig42C0110941AE2353D253F8C6--
[sane-devel] Re: saned problems with xinetd
This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --enig97ABF95867FD8DFC70AE985C Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, Robert Kleemann wrote: > Sure, I ran "tcpdump -i any -x -s 1024" and then ran "scanimage -L" > locally. You can find the output at: > http://www.kleemann.org/crap/tcpdump1 01:23:46.723361 manny.sane > manny.37793: P 1:45(44) ack 20 win 32767 (DF) E..`.>@.@..W... .P. :.. .:../bin/bash: / root/.bashrc: Pe rmission denied. after pipeing the tcpdump through a perl script (ok, ok, hennings C hack was faster, but mine looks better! :) Maybe you should use /bin/sh for such things or make sure bash doesn't access files it shouldn't access >>-- >>...and I doubt complaining to the author will get you >>anything but a free procmail rule. > I hope I haven't offended you. I tried to get it working on my own > and when I failed I hoped that sending a detailed message to the list > would jog the memory of people who had a similar problem. I really > appreciate all this free software! Hehe, I hope I didn't offend you... that's just a footer I include in all my emails nowadays. It's just meant as a joke... finally, this mailing list here exists to help users with such problems. btw. you already have your procmail rule, it sorts your mail to $MAILDIR/Mailing\ Lists/sane regards -- jochen -- ...and I doubt complaining to the author will get you anything but a free procmail rule. --enig97ABF95867FD8DFC70AE985C Content-Type: application/pgp-signature -BEGIN PGP MESSAGE- Version: GnuPG v1.0.7 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE9ich58OF76YrreuMRAviyAKCWs8GPTu+f6Qe9enQbYlbc1tDIQwCfUj4z UwiJyNRndBLkFJu3ygYm/r4= =/xNW -END PGP MESSAGE- --enig97ABF95867FD8DFC70AE985C--
[sane-devel] mustek 1200 cp
Hi, this scanner is supported by the current development version of the mustek_pp backend, more details (including the backend) are available from http://penguin-breeder.org/?page=mustek_pp regards -- jochen Rick Seitz wrote: > Is there a backend for this EPP scanner. I see there is a 12000 P thats > doesnt work yet, but nothing on the 1200 CP, please advise this is the > only item on my computer that keeps taking me back to windows. > > Thanks for the feedback in advance > > Rick > > > ___ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel -- ...and I doubt complaining to the author will get you anything but a free procmail rule.
[sane-devel] Proposal for device lists
Hi, [Henning] > Yet another related topic: It would be great to have some sort of > database generated from the .desc files. So a user could use the WWW > to search for his scanner. E.g with search boxes for Manufacturer, > bus-type and model name. The output would be all we now about the > model including backedn and manufacturer links and by which version > it's supported. Eg, first check stable, then cvs, then external > drivers. > > Can anyone do this? Yes, me... i'll set this up at http://sane.informatik.uni-freiburg.de/scanner.pl in some hours or maybe tommorow regards -- jochen -- ...and I doubt complaining to the author will get you anything but a free procmail rule.
[sane-devel] driver search engine
This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --enig9DA3C85722504C1B3A50F6B2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, a new search engine which searches by model name, manufacturer & bus-type is available at: http://sane.informatik.uni-freiburg.de/cgi-bin/driver.pl The mailinglist search engine is (as always) available at http://sane.informatik.uni-freiburg.de/htdig/index.html both are linked from http://sane.informatik.uni-freiburg.de/ comments are welcome regards -- jochen -- ...and I doubt complaining to the author will get you anything but a free procmail rule. --enig9DA3C85722504C1B3A50F6B2 Content-Type: application/pgp-signature -BEGIN PGP MESSAGE- Version: GnuPG v1.2.0 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE9or+W8OF76YrreuMRAoFyAJ49IiiiB1SLqHtBPQnzlykf2BHTVgCgrjzv fZnOJpOBma0j9xJ5M1tTkDc= =+SRs -END PGP MESSAGE- --enig9DA3C85722504C1B3A50F6B2--
[sane-devel] ccd scanners and 1.0.10
--=.E(ZvrHD6M:2+ys Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Hi, yes, it's true, and it just shouldn't work. regards -- jochen [David A Iacobellis] > I read on another site that ccd scanners were disabled in the sane > 1.0.10 backend and only the cis scanners would work. Could somebody > verify the truth in this statement? If this is true, would a ccd > scanner not work at all or would it cause the application to hang? > > Thanks > ___ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel > --=.E(ZvrHD6M:2+ys Content-Type: application/pgp-signature -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE/EBWS8OF76YrreuMRAhKZAJ4rwmj2WlMx+1eCbT1zPW3etmcPXgCg0onI gx1+9F0Nsn8qOhfbfDsi92g= =Rzmr -END PGP SIGNATURE- --=.E(ZvrHD6M:2+ys--
[sane-devel] saned doesn't release the parallel port when finished
Hi, does this also happen when you scan from command line, i.e. using scanimage? regards -- jochen
[sane-devel] saned on Gentoo 1.4: disable IPv6?
Hi, if you're only using saned to allow non-root users to scan, you could aswell solve this with correct access rights to /dev/parport0 regards -- jochen Wolfgang Fabics wrote: > Thanx a lot, Henning... you gave me the right idea. It's a local > resolver/DNS config problem... gonna look into that. Commented the "only > from" line in xinetd.conf and now it works. > > Thank you, and wonderful christmas holidays to y'all! :-) > -wolfgang > >
[sane-devel] mustek_pp trouble
Hi, Jim George wrote: > [sanei_pa4s2] sanei_pa4s2_open: could not find scanner > [sanei_pa4s2] sanei_pa4s2_open: reported ASIC id 0xb5 this looks like the backend couldn't find your scanner (0xa5 would have been a valid ID for example) > [sanei_pa4s2] sanei_pa4s2_enable: called for fd 0 with value 0 > [sanei_pa4s2] sanei_pa4s2_enable: disable port 'parport0' here the port is released again (at least it should be) can you actually scan with SANE and your scanner? This looks all very strange to me... regards -- jochen
