--=.In0vTD?05_+AN5 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit
Hi, to which port is your scanner connected? Or are you using a printer while trying to scan? You could try to unload the parport modules (or at least make sure they do not lock the port address...) regards -- jochen [Kristen Doyle] > I am trying to get it working on an linux box when i try though the > following comes up > > Linux 2.4.18 > > > [sanei_debug] Setting debug level of mustek_pp to 128. > [mustek_pp] init: SANE v1.0.8, backend v1.0.9-devel > [mustek_pp] I wouldn't let myself be root if I were you... > [mustek_pp] init: option niceload > [mustek_pp] init: trying port `0x378' > [mustek_pp] attach: couldn't attach to `0x378' (Invalid argument) > [mustek_pp] attach(v1.0.9-devel): line 2538: debug exception > [mustek_pp] init: couldn't attach to port `0x378' > [mustek_pp] init: 'name' only allowed after 'port' > [mustek_pp] init: 'vendor' only allowed after 'port' > [mustek_pp] init: option wait-lamp 15 > [mustek_pp] init: setting global option wait-lamp to 15 > [mustek_pp] init: option strip-height 16 > [mustek_pp] init: setting global option strip-height to 16 > > No scanners were identified. If you were expecting something > different, check that the scanner is plugged in, turned on and > detected by the sane-find-scanner tool (if appropriate). Please read > the documentation which came with this software (README, FAQ, > manpages).[mustek_pp] exit: (...) > comp3:/usr/local/etc/sane.d# -- ...and I doubt complaining to the author will get you anything but a free procmail rule. --=.In0vTD?05_+AN5 Content-Type: application/pgp-signature -----BEGIN PGP MESSAGE----- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE8+zmL8OF76YrreuMRAn9xAKCrQGyV7wkGta4KbSGUomJqvZ6FxACg4jPl v7xgrEhdgL4kuUZtstYe6ZY= =FPz/ -----END PGP MESSAGE----- --=.In0vTD?05_+AN5--
