Re: 1.91 zip incomplete?

[Maxim Solodovnik]

You should manually add wrapper files+config, it is not packed by default.

On Fri, Dec 16, 2011 at 15:47, Nick Nudell  wrote:

> Hello,
> I've downloaded and unpacked the latest 1.91 and it appears to be
> incomplete. The wrapper files are missing and there is no install
> directories.
>
> Also, unrelated to the above, the install instructions refer to a
> hibernate file that does not exist. It was not in the prior version
> either so am not sure if it is deprecated.
>
> Thanks,
> Nick
>
> -
> Sent from my iPhone




-- 
WBR
Maxim aka solomax

Re: OpenOffice upload fails

[Maxim Solodovnik]

On Ubuntu you need to install openoffice/libreoffice not
openoffice-headless
This might be the problem

On Thu, Dec 22, 2011 at 04:01, Conrad Beckert
wrote:

> Uploading an Openoffice file to the whiteboard fails with a couple of
> error messages that dont seem to help very much:
>
>
> Name: exitValue
> Value: 1
> Name: command
> Value: [java, -cp,
> "/opt/red5/webapps/openmeetings/jod/commons-cli-1.2.jar" -cp
> "/opt/red5/webapps/openmeetings/jod/commons-io-1.4.jar" -cp
> "/opt/red5/webapps/openmeetings/jod/jodconverter-2.2.2.jar" -cp
> "/opt/red5/webapps/openmeetings/jod/jodconverter-cli-2.2.2.jar" -cp
> "/opt/red5/webapps/openmeetings/jod/juh-3.0.1.jar" -cp
> "/opt/red5/webapps/openmeetings/jod/jurt-3.0.1.jar" -cp
> "/opt/red5/webapps/openmeetings/jod/ridl-3.0.1.jar" -cp
> "/opt/red5/webapps/openmeetings/jod/slf4j-api-1.5.6.jar" -cp
> "/opt/red5/webapps/openmeetings/jod/slf4j-jdk14-1.5.6.jar" -cp
> "/opt/red5/webapps/openmeetings/jod/unoil-3.0.1.jar" -cp
> "/opt/red5/webapps/openmeetings/jod/xstream-1.3.1.jar", -jar,
> /opt/red5/webapps/openmeetings/jod/jodconverter-cli-2.2.2.jar,
> /opt/red5/webapps/openmeetings/uploadtemp/files/249da4992d1132178f29c3523e9b7abf.odt,
> /opt/red5/webapps/openmeetings/upload/files/249da4992d1132178f29c3523e9b7abf/249da4992d1132178f29c3523e9b7abf.pdf]
> Name: error
> Value: Dec 21, 2011 9:41:55 PM
> com.artofsolving.jodconverter.openoffice.connection.AbstractOpenOfficeConnection
> connectINFO: connectedDec 21, 2011 9:41:55 PM
> com.artofsolving.jodconverter.openoffice.connection.AbstractOpenOfficeConnection
> disposingINFO: disconnectedException in thread "main"
> com.artofsolving.jodconverter.openoffice.connection.OpenOfficeException:
> conversion failed: could not load input document  at
> com.artofsolving.jodconverter.openoffice.converter.OpenOfficeDocumentConverter.loadAndExport(OpenOfficeDocumentConverter.java:131)
>   at
> com.artofsolving.jodconverter.openoffice.converter.OpenOfficeDocumentConverter.convertInternal(OpenOfficeDocumentConverter.java:120)
> at
> com.artofsolving.jodconverter.openoffice.converter.AbstractOpenOfficeDocumentConverter.convert(AbstractOpenOfficeDocumentConverter.java:104)
> at
> com.artofsolving.jodconverter.openoffice.converter.AbstractOpenOfficeDocumentConverter.convert(AbstractOpenOfficeDocumentConverter.java:74)
>  at com.artofsolvin
>  
> g.jodconverter.openoffice.converter.AbstractOpenOfficeDocumentConverter.convert(AbstractOpenOfficeDocumentConverter.java:70)
>   at
> com.artofsolving.jodconverter.cli.ConvertDocument.convertOne(ConvertDocument.java:154)
>   at
> com.artofsolving.jodconverter.cli.ConvertDocument.main(ConvertDocument.java:133)Caused
> by: com.sun.star.lang.IllegalArgumentException: URL seems to be an
> unsupported one.   at
> com.sun.star.lib.uno.environments.remote.Job.remoteUnoRequestRaisedException(Job.java:182)
>   at com.sun.star.lib.uno.environments.remote.Job.execute(Job.java:148)
> at
> com.sun.star.lib.uno.environments.remote.JobQueue.enter(JobQueue.java:344)
>   at
> com.sun.star.lib.uno.environments.remote.JobQueue.enter(JobQueue.java:313)
>   at
> com.sun.star.lib.uno.environments.remote.JavaThreadPool.enter(JavaThreadPool.java:101)
>   at
> com.sun.star.lib.uno.bridges.java_remote.java_remote_bridge.sendRequest(java_remote_bridge.java:652)
> at
> com.sun.star.lib.uno.bridges.java_remote.ProxyFactory$Handler.request(ProxyFactory.
>  java:154)  at
> com.sun.star.lib.uno.bridges.java_remote.ProxyFactory$Handler.invoke(ProxyFactory.java:136)
>  at $Proxy5.loadComponentFromURL(Unknown Source) at
> com.artofsolving.jodconverter.openoffice.converter.OpenOfficeDocumentConverter.loadDocument(OpenOfficeDocumentConverter.java:150)
>at
> com.artofsolving.jodconverter.openoffice.converter.OpenOfficeDocumentConverter.loadAndExport(OpenOfficeDocumentConverter.java:127)
>   ... 6 more
> Name: process
> Value: doJodConvert
> Name: exitValue
> Value: 0
> Name: command
> Value:
> Name: completeName
> Value:
> /opt/red5/webapps/openmeetings/uploadtemp/files/249da4992d1132178f29c3523e9b7abf
> Name: error
> Value:
> Name: fileExplorerItemId
> Value: 9
> Name: process
> Value:
> Name: exitValue
> Value: 0
> Name: process
> Value: generateXMLDocument
> Name: exitValue
> Value: 1
> Name: command
> Value: [/usr/bin/convert, -thumbnail, 80,
> /opt/red5/webapps/openmeetings/upload/files/249da4992d1132178f29c3523e9b7abf/249da4992d1132178f29c3523e9b7abf.pdf,
> /opt/red5/webapps/openmeetings/upload/files/249da4992d1132178f29c3523e9b7abf/_thumb_page-%04d.jpg]
> Name: error
> Value: convert: unable to open image
> `/opt/red5/webapps/openmeetings/upload/files/249da4992d1132178f29c3523e9b7abf/249da4992d1132178f29c3523e9b7abf.pdf':
> No such file or directory @ blob.c/OpenBlob/2480.convert: missing an image
> filename
> `/opt/red5/webapps/openmeetings/upload/files/249da4992d1132178f29c3523e9b7abf/_thumb_page-%04d.jpg'
> @ convert.c/ConvertImageCommand/2838.
> Name: process
> Value: generateBatchThumbByWidth
> Name: exitValue

Re: OpenOffice upload fails

[Maxim Solodovnik]

On Ubuntu server you additionally need to install  xvfb


On Thu, Dec 22, 2011 at 15:20, Conrad Beckert
wrote:

> Hallo Maxim,
>
> your tip did the trick. Its a little bit more though: The OpenOffice
> server is necessary (which is consistent with the documentation). What's
> needed is the package openoffice.org - a running OOo. (as to be proven by
> starting it - on an X if you're on an Ubuntu server without graphics)
>
> Thanks for the help
> Conrad
>
>
>
>
>
>  Original-Nachricht ----
> > Datum: Thu, 22 Dec 2011 09:25:36 +0700
> > Von: Maxim Solodovnik 
> > An: openmeetings-user@incubator.apache.org
> > Betreff: Re: OpenOffice upload fails
>
> > On Ubuntu you need to install openoffice/libreoffice not
> > openoffice-headless
> > This might be the problem
> >
> > On Thu, Dec 22, 2011 at 04:01, Conrad Beckert
> > wrote:
> >
> > > Uploading an Openoffice file to the whiteboard fails with a couple of
> > > error messages that dont seem to help very much:
> > >
> > >
> > > Name: exitValue
> > > Value: 1
> > > Name: command
> > > Value: [java, -cp,
> > > "/opt/red5/webapps/openmeetings/jod/commons-cli-1.2.jar" -cp
> > > "/opt/red5/webapps/openmeetings/jod/commons-io-1.4.jar" -cp
> > > "/opt/red5/webapps/openmeetings/jod/jodconverter-2.2.2.jar" -cp
> > > "/opt/red5/webapps/openmeetings/jod/jodconverter-cli-2.2.2.jar" -cp
> > > "/opt/red5/webapps/openmeetings/jod/juh-3.0.1.jar" -cp
> > > "/opt/red5/webapps/openmeetings/jod/jurt-3.0.1.jar" -cp
> > > "/opt/red5/webapps/openmeetings/jod/ridl-3.0.1.jar" -cp
> > > "/opt/red5/webapps/openmeetings/jod/slf4j-api-1.5.6.jar" -cp
> > > "/opt/red5/webapps/openmeetings/jod/slf4j-jdk14-1.5.6.jar" -cp
> > > "/opt/red5/webapps/openmeetings/jod/unoil-3.0.1.jar" -cp
> > > "/opt/red5/webapps/openmeetings/jod/xstream-1.3.1.jar", -jar,
> > > /opt/red5/webapps/openmeetings/jod/jodconverter-cli-2.2.2.jar,
> > >
> >
> /opt/red5/webapps/openmeetings/uploadtemp/files/249da4992d1132178f29c3523e9b7abf.odt,
> > >
> >
> /opt/red5/webapps/openmeetings/upload/files/249da4992d1132178f29c3523e9b7abf/249da4992d1132178f29c3523e9b7abf.pdf]
> > > Name: error
> > > Value: Dec 21, 2011 9:41:55 PM
> > >
> >
> com.artofsolving.jodconverter.openoffice.connection.AbstractOpenOfficeConnection
> > > connectINFO: connectedDec 21, 2011 9:41:55 PM
> > >
> >
> com.artofsolving.jodconverter.openoffice.connection.AbstractOpenOfficeConnection
> > > disposingINFO: disconnectedException in thread "main"
> > >
> com.artofsolving.jodconverter.openoffice.connection.OpenOfficeException:
> > > conversion failed: could not load input document  at
> > >
> >
> com.artofsolving.jodconverter.openoffice.converter.OpenOfficeDocumentConverter.loadAndExport(OpenOfficeDocumentConverter.java:131)
> > >   at
> > >
> >
> com.artofsolving.jodconverter.openoffice.converter.OpenOfficeDocumentConverter.convertInternal(OpenOfficeDocumentConverter.java:120)
> > > at
> > >
> >
> com.artofsolving.jodconverter.openoffice.converter.AbstractOpenOfficeDocumentConverter.convert(AbstractOpenOfficeDocumentConverter.java:104)
> > > at
> > >
> >
> com.artofsolving.jodconverter.openoffice.converter.AbstractOpenOfficeDocumentConverter.convert(AbstractOpenOfficeDocumentConverter.java:74)
> > >  at com.artofsolvin
> > >
> >
> g.jodconverter.openoffice.converter.AbstractOpenOfficeDocumentConverter.convert(AbstractOpenOfficeDocumentConverter.java:70)
> > >   at
> > >
> >
> com.artofsolving.jodconverter.cli.ConvertDocument.convertOne(ConvertDocument.java:154)
> > >   at
> > >
> >
> com.artofsolving.jodconverter.cli.ConvertDocument.main(ConvertDocument.java:133)Caused
> > > by: com.sun.star.lang.IllegalArgumentException: URL seems to be an
> > > unsupported one.   at
> > >
> >
> com.sun.star.lib.uno.environments.remote.Job.remoteUnoRequestRaisedException(Job.java:182)
> > >   at com.sun.star.lib.uno.environments.remote.Job.execute(Job.java:148)
> > > at
> > >
> >
> com.sun.star.lib.uno.environments.remote.JobQueue.enter(JobQueue.java:344)
> > >   at
> > >
> >
> com.sun.star.lib.uno.environments.remote.JobQueue.enter(JobQueue.java:313)
> > >   at
> > >
> >
> com.sun.star.lib.uno.environmen

Re: OpenOffice upload fails

[Maxim Solodovnik]

I guess openoffice.org should install  xvfb since it it GUI application ang
it wont work without X server (the real server or  xvfb )

On Thu, Dec 22, 2011 at 15:49, Conrad Beckert
wrote:

> It seems to work without it.
>
> Conrad
>  Original-Nachricht 
> > Datum: Thu, 22 Dec 2011 15:26:52 +0700
> > Von: Maxim Solodovnik 
> > An: openmeetings-user@incubator.apache.org
> > Betreff: Re: OpenOffice upload fails
>
> > On Ubuntu server you additionally need to install  xvfb
> >
> >
> > On Thu, Dec 22, 2011 at 15:20, Conrad Beckert
> > wrote:
> >
> > > Hallo Maxim,
> > >
> > > your tip did the trick. Its a little bit more though: The OpenOffice
> > > server is necessary (which is consistent with the documentation).
> What's
> > > needed is the package openoffice.org - a running OOo. (as to be proven
> > by
> > > starting it - on an X if you're on an Ubuntu server without graphics)
> > >
> > > Thanks for the help
> > > Conrad
> > >
> > >
> > >
> > >
> > >
> > >  Original-Nachricht 
> > > > Datum: Thu, 22 Dec 2011 09:25:36 +0700
> > > > Von: Maxim Solodovnik 
> > > > An: openmeetings-user@incubator.apache.org
> > > > Betreff: Re: OpenOffice upload fails
> > >
> > > > On Ubuntu you need to install openoffice/libreoffice not
> > > > openoffice-headless
> > > > This might be the problem
> > > >
> > > > On Thu, Dec 22, 2011 at 04:01, Conrad Beckert
> > > > wrote:
> > > >
> > > > > Uploading an Openoffice file to the whiteboard fails with a couple
> > of
> > > > > error messages that dont seem to help very much:
> > > > >
> > > > >
> > > > > Name: exitValue
> > > > > Value: 1
> > > > > Name: command
> > > > > Value: [java, -cp,
> > > > > "/opt/red5/webapps/openmeetings/jod/commons-cli-1.2.jar" -cp
> > > > > "/opt/red5/webapps/openmeetings/jod/commons-io-1.4.jar" -cp
> > > > > "/opt/red5/webapps/openmeetings/jod/jodconverter-2.2.2.jar" -cp
> > > > > "/opt/red5/webapps/openmeetings/jod/jodconverter-cli-2.2.2.jar" -cp
> > > > > "/opt/red5/webapps/openmeetings/jod/juh-3.0.1.jar" -cp
> > > > > "/opt/red5/webapps/openmeetings/jod/jurt-3.0.1.jar" -cp
> > > > > "/opt/red5/webapps/openmeetings/jod/ridl-3.0.1.jar" -cp
> > > > > "/opt/red5/webapps/openmeetings/jod/slf4j-api-1.5.6.jar" -cp
> > > > > "/opt/red5/webapps/openmeetings/jod/slf4j-jdk14-1.5.6.jar" -cp
> > > > > "/opt/red5/webapps/openmeetings/jod/unoil-3.0.1.jar" -cp
> > > > > "/opt/red5/webapps/openmeetings/jod/xstream-1.3.1.jar", -jar,
> > > > > /opt/red5/webapps/openmeetings/jod/jodconverter-cli-2.2.2.jar,
> > > > >
> > > >
> > >
> >
> /opt/red5/webapps/openmeetings/uploadtemp/files/249da4992d1132178f29c3523e9b7abf.odt,
> > > > >
> > > >
> > >
> >
> /opt/red5/webapps/openmeetings/upload/files/249da4992d1132178f29c3523e9b7abf/249da4992d1132178f29c3523e9b7abf.pdf]
> > > > > Name: error
> > > > > Value: Dec 21, 2011 9:41:55 PM
> > > > >
> > > >
> > >
> >
> com.artofsolving.jodconverter.openoffice.connection.AbstractOpenOfficeConnection
> > > > > connectINFO: connectedDec 21, 2011 9:41:55 PM
> > > > >
> > > >
> > >
> >
> com.artofsolving.jodconverter.openoffice.connection.AbstractOpenOfficeConnection
> > > > > disposingINFO: disconnectedException in thread "main"
> > > > >
> > >
> com.artofsolving.jodconverter.openoffice.connection.OpenOfficeException:
> > > > > conversion failed: could not load input document  at
> > > > >
> > > >
> > >
> >
> com.artofsolving.jodconverter.openoffice.converter.OpenOfficeDocumentConverter.loadAndExport(OpenOfficeDocumentConverter.java:131)
> > > > >   at
> > > > >
> > > >
> > >
> >
> com.artofsolving.jodconverter.openoffice.converter.OpenOfficeDocumentConverter.convertInternal(OpenOfficeDocumentConverter.java:120)
> > > > > at
> > > > >
> > > >
> > &g

Re: OpenOffice upload fails

[Maxim Solodovnik]

surprisingly  openoffice-headless is not enough
After long time debug I found  openoffice should be installed, otherwise
conversion using jod does not work

On Thu, Dec 22, 2011 at 16:03, seba.wag...@gmail.com
wrote:

> No you don't need.
> There is a package openoffice-headless
>
> Since version 3.x.x there is no need for any XVFB or other framebuffer
> to run OpenOffice as a service.
>
> Sebastian
>
> 2011/12/22 Maxim Solodovnik :
> > I guess openoffice.org should install  xvfb since it it GUI application
> ang
> > it wont work without X server (the real server or  xvfb )
> >
> >
> > On Thu, Dec 22, 2011 at 15:49, Conrad Beckert <
> conrad_videokonfer...@gmx.de>
> > wrote:
> >>
> >> It seems to work without it.
> >>
> >> Conrad
> >>  Original-Nachricht 
> >> > Datum: Thu, 22 Dec 2011 15:26:52 +0700
> >> > Von: Maxim Solodovnik 
> >> > An: openmeetings-user@incubator.apache.org
> >> > Betreff: Re: OpenOffice upload fails
> >>
> >> > On Ubuntu server you additionally need to install  xvfb
> >> >
> >> >
> >> > On Thu, Dec 22, 2011 at 15:20, Conrad Beckert
> >> > wrote:
> >> >
> >> > > Hallo Maxim,
> >> > >
> >> > > your tip did the trick. Its a little bit more though: The OpenOffice
> >> > > server is necessary (which is consistent with the documentation).
> >> > > What's
> >> > > needed is the package openoffice.org - a running OOo. (as to be
> proven
> >> > by
> >> > > starting it - on an X if you're on an Ubuntu server without
> graphics)
> >> > >
> >> > > Thanks for the help
> >> > > Conrad
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >  Original-Nachricht 
> >> > > > Datum: Thu, 22 Dec 2011 09:25:36 +0700
> >> > > > Von: Maxim Solodovnik 
> >> > > > An: openmeetings-user@incubator.apache.org
> >> > > > Betreff: Re: OpenOffice upload fails
> >> > >
> >> > > > On Ubuntu you need to install openoffice/libreoffice not
> >> > > > openoffice-headless
> >> > > > This might be the problem
> >> > > >
> >> > > > On Thu, Dec 22, 2011 at 04:01, Conrad Beckert
> >> > > > wrote:
> >> > > >
> >> > > > > Uploading an Openoffice file to the whiteboard fails with a
> couple
> >> > of
> >> > > > > error messages that dont seem to help very much:
> >> > > > >
> >> > > > >
> >> > > > > Name: exitValue
> >> > > > > Value: 1
> >> > > > > Name: command
> >> > > > > Value: [java, -cp,
> >> > > > > "/opt/red5/webapps/openmeetings/jod/commons-cli-1.2.jar" -cp
> >> > > > > "/opt/red5/webapps/openmeetings/jod/commons-io-1.4.jar" -cp
> >> > > > > "/opt/red5/webapps/openmeetings/jod/jodconverter-2.2.2.jar" -cp
> >> > > > > "/opt/red5/webapps/openmeetings/jod/jodconverter-cli-2.2.2.jar"
> >> > > > > -cp
> >> > > > > "/opt/red5/webapps/openmeetings/jod/juh-3.0.1.jar" -cp
> >> > > > > "/opt/red5/webapps/openmeetings/jod/jurt-3.0.1.jar" -cp
> >> > > > > "/opt/red5/webapps/openmeetings/jod/ridl-3.0.1.jar" -cp
> >> > > > > "/opt/red5/webapps/openmeetings/jod/slf4j-api-1.5.6.jar" -cp
> >> > > > > "/opt/red5/webapps/openmeetings/jod/slf4j-jdk14-1.5.6.jar" -cp
> >> > > > > "/opt/red5/webapps/openmeetings/jod/unoil-3.0.1.jar" -cp
> >> > > > > "/opt/red5/webapps/openmeetings/jod/xstream-1.3.1.jar", -jar,
> >> > > > > /opt/red5/webapps/openmeetings/jod/jodconverter-cli-2.2.2.jar,
> >> > > > >
> >> > > >
> >> > >
> >> >
> >> >
> /opt/red5/webapps/openmeetings/uploadtemp/files/249da4992d1132178f29c3523e9b7abf.odt,
> >> > > > >
> >> > > >
> >> > >
> >> >
> >> >
> /opt/red5/webapps/openmeetings/upload/files/249da4992d1132178f29c3523e9b7abf/249da4992d1132178f29c3523

Re: arabic lamguage

[Maxim Solodovnik]

Hello Hassan,

Arabic language is already set to be rtl. I'm afraid the issues you
observing are caused by incomplete translation.
Please go to Administration->Languages and add missing translations
for Arabic language, then relogin. I believe this should fix the problem

On Tue, Jan 3, 2012 at 12:42, Hasan Gharehasanloo wrote:

> Hi everybody
> I want to use arabic language for open meetings, but it show words in
> opesite position, for example it shows 'everybody Hi' instead of 'Hi
> everybody'. how can I fix it???
> And how can I change the style to rtl instead of ltr???
>
> --
> -
> Best Regards
> Hassan Gharehasanloo
>



-- 
WBR
Maxim aka solomax

Re: Webservices issue - incorrect URL returned?

[Maxim Solodovnik]

can you manually change the port to be 5080 and recheck?

On Mon, Mar 12, 2012 at 04:23, Oleg Larin  wrote:

> Hello,
>
> We have chekced out one of the last versions of openmeetings code
> (svn:1298740 from 9-mar-12) and experience strange behaviour of
> webservices. In our environment for webservices we use php with nusoap
> (latest ver. 0.9.5).
>
> The issue occurs when we are try to call:
>$client_userService = new
> nusoap_client("http://
> ".$OPENMEETINGS_HOST.":".$OPENMEETINGS_PORT."/openmeetings/services/UserService?wsdl",
> true);
>$client_userService->setUseCurl(true);
>$result = $client_userService->call('getSession');
>
> We getting the following error:
>HTTP Error: cURL ERROR: 7: couldn't connect to hosturl:
>http://
> :8080/openmeetings/services/UserService.UserServiceHttpSoap11Endpoint/content_type:
>http_code: 0header_size: 0request_size: 0filetime:
> -1ssl_verify_result: 0redirect_count: 0total_time:  0namelookup_time:
> 0.000268connect_time: 0pretransfer_time: 0size_upload: 0size_download:
> 0speed_download:0speed_upload: 0download_content_length:
> 0upload_content_length: 0starttransfer_time: 0redirect_time: 0
>
>
> The result the same even with firewall completely switched off. The
> php code has been used for over a year with an old version with no
> issues.
>
> Could this be related to the fact that Webservice returns an incorrect
> URL, pointing to TCP port 8080 instead of 5080?  On the server TCP
> port 8080 is not in use - netstat shows no processes listening to it.
>
>
> Thanks in advance,
>
> Oleg
>



-- 
WBR
Maxim aka solomax

Re: Hi

[Maxim Solodovnik]

Already fixed in trunk
On Mar 18, 2012 2:05 PM, "Alexei Fedotov"  wrote:

> Hello Sunil,
>
> I'm afraid this is a bug. You likely need a technical person to fix it.
> The best thing you can do without tech knowledge is to report the bug to
> the tracking system.
>
> https://issues.apache.org/jira/browse/OPENMEETINGS
>
> Thank you
>
> On Sunday, March 18, 2012, Tutor Pace via LinkedIn wrote:
>
>>  LinkedIn
>>
>> *Tutor Pace* has sent you a message.
>>
>> *Date:* 3/17/2012
>>
>> *Subject:* Hi
>>
>> Hi Alexi
>>
>> We are currently using open meetings . I was wondering if you have any
>> idea why whiteboard ID does not start with 1. when i open a whiteboard
>> session , the number on the whiteboard always seems to be an uneven number
>> like whiteboard 458, 1257. How do we fix it ? Do we need a technical person
>> to fix it?
>>
>> Thank you in advance for replying to this message.
>>
>> Regards
>> Sunil Kumar
>>
>> View/reply to this 
>> message
>>
>> Don't want to receive e-mail notifications? Adjust your message 
>> settings
>> .
>>
>> © 2012, LinkedIn Corporation
>>
>
>
> --
> --
> With best regards / с наилучшими пожеланиями,
> Alexei Fedotov / Алексей Федотов,
> http://dataved.ru/
> +7 916 562 8095
>
>

Re: Recording OpenMeetings version - 1_9_1_r4707

[Maxim Solodovnik]

It was 1.9.1 with replaced Red5.
Red5 stream was not closed, and all video was written into .ser file
instead of .flv

Here are Sebastian's foundings on this:

BTW: I found out how you can produce .ser files (the invalid flv files that
you reported the last time).
The .ser file is an internal file produced by Red5. When you record a
stream using OpenMeetings recording, every stream gets its own
StreamListener in  FLVRecorderService.java for example the
StreamAudioListener.java.
If you know watch the streams directory while recording you can see
the .ser file
growing.
In FLVRecorderService::stopRecordingShow() it iterates through the
Listeners of the connection to close the StreamListeners and Red5 renames .
ser files to .flv (and maybe writes some magic end byte or header in the
flv)
If somehow, because of an exception stopRecordingShow is _not_ called then
the .ser files stay there forever.

Sebastian


On Tue, Mar 20, 2012 at 16:13, Alexei Fedotov wrote:

> Irina reports she also has some issues with new version.
>
> Irina, could you also send a log excerpt?
> --
> With best regards / с наилучшими пожеланиями,
> Alexei Fedotov / Алексей Федотов,
> http://dataved.ru/
> +7 916 562 8095
>
>
>
> On Tue, Mar 20, 2012 at 11:47 AM, seba.wag...@gmail.com <
> seba.wag...@gmail.com> wrote:
>
>> Please share your red5/openmeetings log. I guess that there is some
>> exception in there.
>>
>>
>> Sebastian
>>
>> 2012/3/19 Willian Barrozo 
>>
>>>   In some videos that error appears in the picture below:
>>>
>>>  [image: erro]
>>>
>>> In other cases, these errors appear in log attached (audio1user.txt).
>>> However, the audio was recorded only the admin user.
>>>
>>> Willian Barrozo
>>>
>>>  *From:* seba.wag...@gmail.com
>>> *Sent:* Monday, March 19, 2012 5:09 PM
>>> *To:* Willian Barrozo 
>>> *Cc:* openmeetings-user@incubator.apache.org ;
>>> openmeetings-...@incubator.apache.org
>>> *Subject:* Re: Recording OpenMeetings version - 1_9_1_r4707
>>>
>>> in the bottom left info box there is an "i" (info) icon. If you click on
>>> that while a recording is selected a popup is shown that contains the log
>>> of the recording process. You might check that, normally you might find
>>> something like "usr/bin/sox could not find or execute" or something like
>>> that.
>>>
>>> Sebatian
>>>
>>> 2012/3/19 Willian Barrozo 
>>>
   Yes, I can hear the person at the conference, but the recording only
 hear my voice, and sometimes does not record the video and looks like
 this:

 [image: ScreenShot001]

 Willian Barrozo

  *From:* seba.wag...@gmail.com
 *Sent:* Monday, March 19, 2012 3:43 PM
 *To:* Willian Barrozo 
 *Cc:* openmeetings-user@incubator.apache.org ;
 openmeetings-...@incubator.apache.org
 *Subject:* Re: Recording OpenMeetings version - 1_9_1_r4707

  Have you tried in a 1:1 session with somebody else that you can hear
 each other really? Or in other words are you really sure that your
 microphone did produce any noise ?

 Sebastian

 2012/3/19 Willian Barrozo 

>  Hello guys,
>
> I'm having problems with the recording, it always happens. It is
> usually not recorded the video whiteboard, but without the audio
> participants. Can anyone help me?
>
> I've tried and can not resolve the problem.
>
> Willian Barrozo
>



 --
 Sebastian Wagner
 http://www.openmeetings.de
 http://incubator.apache.org/openmeetings/
 http://www.webbase-design.de
 http://www.wagner-sebastian.com
 seba.wag...@gmail.com

>>>
>>>
>>>
>>> --
>>> Sebastian Wagner
>>> http://www.openmeetings.de
>>> http://incubator.apache.org/openmeetings/
>>> http://www.webbase-design.de
>>> http://www.wagner-sebastian.com
>>> seba.wag...@gmail.com
>>>
>>
>>
>>
>> --
>> Sebastian Wagner
>> http://www.openmeetings.de
>> http://incubator.apache.org/openmeetings/
>> http://www.webbase-design.de
>> http://www.wagner-sebastian.com
>> seba.wag...@gmail.com
>>
>
>


-- 
WBR
Maxim aka solomax

Re: Error HTTP: 500 when uploading/sharing file

[Maxim Solodovnik]

JUnit tests might fail. We need some time to make it work.

I'm I right thinking you unable to install OM compiled from the sources?


On Fri, Mar 30, 2012 at 06:07, Hamdi Thabet wrote:

> Some JUnit tests don't pass. I'm using the last version of openmmetings in
> repository from :
>
>
> https://svn.apache.org/repos/asf/incubator/openmeetings/trunk/singlewebapp
>



-- 
WBR
Maxim aka solomax

Re: Réf. : Re: Error HTTP: 500 when uploading/sharing file

[Maxim Solodovnik]

The second problem seems to be caused by the first one.
So lets start from 1):

can you please do the following
drop openmeetings DB in postgress
create  openmeetings DB in postgress (please ensure DB encoding is set to
be UTF8)
delete all files from dist/red5/log folder

go to dist/red5
run red5-debug.sh
from you browser  access http://localhost:5080/openmeetings/install
perform all steps required

check your DB
if it is empty send me the logs.


On Fri, Mar 30, 2012 at 09:30, Hamdi THABET wrote:

>
> I installed sucessfully OM from the source but now my two problems are:
> 1) my database in PostgreSQL still empty (after the automatic creation of
> 46 tables).
>
> 2) I can't upload any type of file with any size (OpenOffice.org service
> is running on port 8100 and listening to 127.0.0.1 and I use swftools
> 0.9.1).
>
>
>
>
>  *Hamdi THABET
> *Élève ingénieur en Téléinformatique (3e année)
> Maîtrisard en informatique
> Technicien en Réseau informatique et Télécoms
>  [+216] 52 72 27 25
> hamdi.thabe...@gmail.com
> *---Message original---*
>
>  *De :* Maxim Solodovnik 
> *Date :* 03/30/12 03:21:37
> *A :* openmeetings-user@incubator.apache.org
> *Sujet :* Re: Error HTTP: 500 when uploading/sharing file
>
> JUnit tests might fail. We need some time to make it work.
>
> I'm I right thinking you unable to install OM compiled from the sources?
>
>
> On Fri, Mar 30, 2012 at 06:07, Hamdi Thabet wrote:
>  Some JUnit tests don't pass. I'm using the last version of openmmetings
> in repository from :
>
>
> https://svn.apache.org/repos/asf/incubator/openmeetings/trunk/singlewebapp
>
>
>
> --
> WBR
> Maxim aka solomax
>
>



-- 
WBR
Maxim aka solomax
<><<47_g_letter.gif>><><<26_f_cell.gif>><<608-1041a.jpg>>

Re: Réf. : Re: Réf. : Re: Error HTTP: 500 when uploading/sharing file

[Maxim Solodovnik]

It seems like you have derby DB at the end.
Lets find it out:
1) check if you have "openmeetings" folder in dist/red5 ?
2) please tell me how have you build the sources? (have you used and
-DB=postgres)
3) can you
check dist\red5\webapps\openmeetings\WEB-INF\classes\META-INF\persistence.xml
(the *only* location of DB settings)

what is written in wrote:

> I have some remarks :
> 1) I have already done all these steps (video conference and recording
> work well).
> 2) I have changed the name of my database to: "collabmee" in postgresql
> and in "config.XML" (I tested first with the name "openmeetings").
> 3) UTF8 is done and 46 are created automatically when I compile with ant
> command.
> 4) I run "red5.bat" because I'm under Win7 (x64) and not "red5-debug.sh".
> 5) I installed sucessufully from:
> http://localhost:5080/openmeetings/install
>
> If I made a mistake tell me please Maxim.
>
> How can I subscribe (admin and normal account) and connect without having
> any entry in my users table in DB ?
>



-- 
WBR
Maxim aka solomax
<<608-1041a.jpg>><>

Re: Réf. : Re: Réf. : Re: Error HTTP: 500 when uploading/sharing file

[Maxim Solodovnik]

OK
please do the following
1) delete dist folder
2) modify src\META-INF\postgres_persistence.xml to have your DB settings
3) run "ant -DB=postgres"
4) do not change anything (no folder renaming or file editing)
5) go to dist/red5
6) run red5.bat
7) go to http://localhost:5080/openmeetings/install
8) check postgres DB


On Fri, Mar 30, 2012 at 11:06, Hamdi Thabet wrote:

> Also in my "*dist\red5\webapps\collabmee\config.xml"* I have changed :
>
> *openmeetings*   TO*
> collabmee*
> +
> /*openmeetings*/ TO /*
> collabmee*/
>
> and I installed with: http://localhost:5080/collabmee/install
>
>
>


-- 
WBR
Maxim aka solomax

Re: Réf. : Re: Réf. : Re: Error HTTP: 500 when uploading/sharing file

[Maxim Solodovnik]

The postgres DB is now have data?


On Fri, Mar 30, 2012 at 11:37, Hamdi Thabet wrote:

> The only change that I have made in "postgres_persistence.xml" was :
> 
>
> 0102 my password to access to posgresql server. Is it the right place ?
>
> After that I compiled with :  "ant -DB=postgres"
> and it was successfully done.
>



-- 
WBR
Maxim aka solomax

Re: Réf. : Re: Réf. : Re: Error HTTP: 500 when uploading/sharing file

[Maxim Solodovnik]

No, openmeeting_persistense is not required. I'll try to setup postgres and
verify the steps. Can you send the recent logs?
On Mar 30, 2012 12:23 PM, "Hamdi Thabet"  wrote:

> I think it's necessary to have a file named: "openmeetings_
> persistence.xml".
> I still have 0 table in my DB. The problem become more complicated.
>

Re: Réf. : Re: Réf. : Re: Error HTTP: 500 when uploading/sharing file

[Maxim Solodovnik]

the are created on application start

I have asked you do not perform any renames, but according to the log you
have renamed your context to collabme.

According to the log your classpath is incomplete:
ClassNotFoundException: org.apache.axis2.transport.http.AxisServlet
ClassNotFoundException:
org.apache.commons.io.output.DeferredFileOutputStream

This might be caused by bad build.

Could you please do the following:
1) delete folders *build* and *dist*
2) svn up (to update the sources)
3) ant -Ddb=postgres >build.log
4) run and install OM

I'll try to check work with postgres now

On Fri, Mar 30, 2012 at 12:38, Hamdi Thabet wrote:

> Ok. Do you know in which step exactly the 46 DB tables are automatically
> created ?
>



-- 
WBR
Maxim aka solomax

Re: Error HTTP: 500 when uploading/sharing file

[Maxim Solodovnik]

Just set up Postgres 9.1.3 (postgresql-9.1.3-1-windows-x64.exe)
build fresh sources
install
was able to login (no warnings or errors)
Database is full of Data

On Fri, Mar 30, 2012 at 14:29, Hamdi Thabet wrote:

> I think that the problem is related to the DB because it's still always
> empty even after subscription.
> I will try the compiled version of OM 1.9.1.
>
> I've to solve this problem too (from log) :
>
> ClassNotFoundException: org.apache.axis2.transport.http.AxisServlet
> ClassNotFoundException:
> org.apache.commons.io.output.DeferredFileOutputStream
>
>


-- 
WBR
Maxim aka solomax

Re: RTMPS, error while starting red5

[Maxim Solodovnik]

I'm going to test RTPMS today/tomorrow will let you know what I have found

On Fri, Mar 30, 2012 at 16:35, Thibault Le Meur
wrote:

> By the way, if I comment the 2 following lines in red5-core.xml
> value="${rtmp.receive_buffer_size}" />
>
>
> Then Red5 starts, opens port 8443 (supposed to work for RTPMS), but it
> wont serve the RTMPS service.
>
> Le 30/03/2012 11:32, Thibault Le Meur a écrit :
> > Hi,
> >
> > I've followed the following  RTMPS guide:
> > http://incubator.apache.org/openmeetings/RTMPSAndHTTPS.html
> >
> > However, when starting Red5 I get the following error:
> > Error creating bean with name 'rtmpsTransport' 
> >Invalid property 'receiveBufferSize' ...
> > Bean property 'receiveBufferSize' is not writable or has an invalid
> > setter method.
> >
> >
> >  While googling for this issue I've found a reference to a ticket in
> Red5:
> > http://code.google.com/p/red5/issues/detail?id=159
> > So far it is mentionned: "to be addressed post 1.0 release"
> >
> > Have you been confronted to this ?
> > Is there a solution (for instance installing an older Red5 version, but
> > which one is known to work ?).
> >
> > Thanks in advance for your help,
> > Thibault
>
>


-- 
WBR
Maxim aka solomax

Re: RTMPS, error while starting red5

[Maxim Solodovnik]

Hello Thibault

I was able to set up RTPMS on trunk version (rev. 1307530.) using following
steps

*Set up RTMPS*
--


   1. Uncomment  section in red5/conf/red5-core.xml
   2. Edit red5/conf/red5.properties and set rtmps.port=5443 and
   rtmps.keystorepass=password (password = password you set on your new
   keystore)
   3. Edit red5/webapps/openmeetings/config.xml and set
   5443 , yesand
   best
   4. Restart red5 and try to connect - your connection should now be made
   via RTMPS (close port 1935 to be sure)


Unfortunately I was unable to test it since I have NO _real_ certificate
I'll try to get certificate to test and will update instruction on site in
case of success


On Fri, Mar 30, 2012 at 19:27, Thibault Le Meur
wrote:

>  Le 30/03/2012 13:06, Maxim Solodovnik a écrit :
>
> I'm going to test RTPMS today/tomorrow will let you know what I have found
>
>
> Thanks,
> I'll wait for your feedback then.
>
> Regards,
> Thibault
>
>
>
>
> On Fri, Mar 30, 2012 at 16:35, Thibault Le Meur <
> thibault.lem...@supelec.fr> wrote:
>
>> By the way, if I comment the 2 following lines in red5-core.xml
>>> value="${rtmp.receive_buffer_size}" />
>>
>>
>> Then Red5 starts, opens port 8443 (supposed to work for RTPMS), but it
>> wont serve the RTMPS service.
>>
>> Le 30/03/2012 11:32, Thibault Le Meur a écrit :
>> > Hi,
>> >
>> > I've followed the following  RTMPS guide:
>> > http://incubator.apache.org/openmeetings/RTMPSAndHTTPS.html
>> >
>> > However, when starting Red5 I get the following error:
>> > Error creating bean with name 'rtmpsTransport' 
>> >Invalid property 'receiveBufferSize' ...
>> > Bean property 'receiveBufferSize' is not writable or has an invalid
>> > setter method.
>> >
>> >
>> >  While googling for this issue I've found a reference to a ticket in
>> Red5:
>> > http://code.google.com/p/red5/issues/detail?id=159
>> > So far it is mentionned: "to be addressed post 1.0 release"
>> >
>> > Have you been confronted to this ?
>> > Is there a solution (for instance installing an older Red5 version, but
>> > which one is known to work ?).
>> >
>> > Thanks in advance for your help,
>> > Thibault
>>
>>
>
>
>  --
> WBR
> Maxim aka solomax
>
>
>


-- 
WBR
Maxim aka solomax

Re: RTMPS, error while starting red5

[Maxim Solodovnik]

great
I'll update the documentation at
http://incubator.apache.org/openmeetings/RTMPSAndHTTPS.html



On Sat, Mar 31, 2012 at 00:50, Thibault Le Meur
wrote:

>  Thanks Maxim for this test.
>
> I've followowed your recommendations and it seems to work. The differences
> between my working setup and my previous one are:
> * I' used the 
>
>1. Uncomment  section in red5/conf/red5-core.xml
>2. Edit red5/conf/red5.properties and set rtmps.port=5443 and
>rtmps.keystorepass=password (password = password you set on your new
>keystore)
>3. Edit red5/webapps/openmeetings/config.xml and set
>5443 , yesand
>best
>4. Restart red5 and try to connect - your connection should now be
>made via RTMPS (close port 1935 to be sure)
>
>
>  Unfortunately I was unable to test it since I have NO _real_ certificate
> I'll try to get certificate to test and will update instruction on site in
> case of success
>
>
> On Fri, Mar 30, 2012 at 19:27, Thibault Le Meur <
> thibault.lem...@supelec.fr> wrote:
>
>>  Le 30/03/2012 13:06, Maxim Solodovnik a écrit :
>>
>> I'm going to test RTPMS today/tomorrow will let you know what I have found
>>
>>
>>  Thanks,
>> I'll wait for your feedback then.
>>
>> Regards,
>> Thibault
>>
>>
>>
>>
>> On Fri, Mar 30, 2012 at 16:35, Thibault Le Meur <
>> thibault.lem...@supelec.fr> wrote:
>>
>>> By the way, if I comment the 2 following lines in red5-core.xml
>>>>> value="${rtmp.receive_buffer_size}" />
>>>>> />
>>>
>>> Then Red5 starts, opens port 8443 (supposed to work for RTPMS), but it
>>> wont serve the RTMPS service.
>>>
>>> Le 30/03/2012 11:32, Thibault Le Meur a écrit :
>>> > Hi,
>>> >
>>> > I've followed the following  RTMPS guide:
>>> > http://incubator.apache.org/openmeetings/RTMPSAndHTTPS.html
>>> >
>>> > However, when starting Red5 I get the following error:
>>> > Error creating bean with name 'rtmpsTransport' 
>>> >Invalid property 'receiveBufferSize' ...
>>> > Bean property 'receiveBufferSize' is not writable or has an invalid
>>> > setter method.
>>> >
>>> >
>>> >  While googling for this issue I've found a reference to a ticket in
>>> Red5:
>>> > http://code.google.com/p/red5/issues/detail?id=159
>>> > So far it is mentionned: "to be addressed post 1.0 release"
>>> >
>>> > Have you been confronted to this ?
>>> > Is there a solution (for instance installing an older Red5 version, but
>>> > which one is known to work ?).
>>> >
>>> > Thanks in advance for your help,
>>> > Thibault
>>>
>>>
>>
>>
>>  --
>> WBR
>> Maxim aka solomax
>>
>>
>>
>
>
>  --
> WBR
> Maxim aka solomax
>
>
>


-- 
WBR
Maxim aka solomax

Re: Settting up a development environment

[Maxim Solodovnik]

The build works as expected (I tested it mustipke times with postgres).
Could you please download binary nightly snapshot, change persistence.XML
only and try to run?
On Mar 31, 2012 3:26 AM, "Hamdi Thabet"  wrote:

> I repeated all the procedure without any rename and with a clean copy but
> always the same problem when importing a file (any type and any size)
> with OM 1.9.1 precompiled upload work fine even without OpenOffice.org
> service.
>

Re: Error HTTP: 500 when uploading/sharing file

[Maxim Solodovnik]

I'm not sure the problem is in import since you reporting your DB is empty.
I'm surprised you able to login
On Mar 31, 2012 3:27 AM, "Hamdi Thabet"  wrote:

> I repeated all the procedure without any rename and with a clean copy but
> always the same problem when importing a file (any type and any size)
> with OM 1.9.1 precompiled upload work fine even without OpenOffice.org
> service.
>

Re: Settting up a development environment

[Maxim Solodovnik]

I'll be available later today (in about 10 hours)
Are you trying set up windows environment?
On Mar 31, 2012 12:10 PM, "Hamdi Thabet"  wrote:

> the DB works well now but I still have the same problem HTTP_ERROR:500
> when importing a file (pdf, jpg, ...).
> I can import all thing with OM 1.9.1 precompiled but with the updated
> version from repository I can't.
> Can you help me Maxim by accessing my laptop via teamviewer ? I need an
> urgent help. I'm using OM in my final studies project.
>
> Is there an incompatibility between the OM version in repository and
> SWFTools 0.9.1 ?
> Tell me please what versions are you using of these programs : SWFTools,
> ImageMagic, Sox and Ghostscript.
> I'm very confused.
>
> I joined my recent log files. 2 errors from "error.log"
> java.lang.ClassNotFoundException:
> org.apache.axis2.transport.http.AxisServlet
> java.lang.ClassNotFoundException:
> org.apache.commons.io.output.DeferredFileOutputStream
>
>

Re: Settting up a development environment

[Maxim Solodovnik]

Hello Hamdi.

Unfortunately I had no time yesterday and most probably will not have time
today :(

Please try to install all required software (LibreOffice/OppenOffice, sox,
ffmpeg etc.) to the path with no spaces (like d:\apps\LO35, d:\apps\ffmpeg
etc)

If there will be convertion please send me its text

I was unable to set up convertion on my win-win machine. (I can only set in
up on *nix Ubuntu/debian/centos)

I'll keep trying, but not sure how much time it will take
On Sun, Apr 1, 2012 at 02:08, Hamdi Thabet  wrote:

> Maxim can we do an essay with teamviewer ? Are you available now ?
>



-- 
WBR
Maxim aka solomax

Re: Settting up a development environment

[Maxim Solodovnik]

-- if there will be convertion errors...
Sorry
On Apr 1, 2012 12:32 PM, "Maxim Solodovnik"  wrote:

> Hello Hamdi.
>
> Unfortunately I had no time yesterday and most probably will not have time
> today :(
>
> Please try to install all required software (LibreOffice/OppenOffice, sox,
> ffmpeg etc.) to the path with no spaces (like d:\apps\LO35, d:\apps\ffmpeg
> etc)
>
> If there will be convertion please send me its text
>
> I was unable to set up convertion on my win-win machine. (I can only set
> in up on *nix Ubuntu/debian/centos)
>
> I'll keep trying, but not sure how much time it will take
> On Sun, Apr 1, 2012 at 02:08, Hamdi Thabet wrote:
>
>> Maxim can we do an essay with teamviewer ? Are you available now ?
>>
>
>
>
> --
> WBR
> Maxim aka solomax
>

Re: Réf. : Re: Settting up a development environment

[Maxim Solodovnik]

According to these screenshots exception occurred on the java side while
upload and/or conversion is performed.
HTTP status 500 usually means server side error.


On Sun, Apr 1, 2012 at 22:54, Hamdi THABET  wrote:

> I used "maindebug.as3.swf10.swf" to find something about the
> HTTP-ERROR:500.
> I attached 3 screenshots related to : "importing a jpg for profil"
> and "importing PDF to the whitboard".
>
>
>
>
>  *Hamdi THABET
> *Élève ingénieur en Téléinformatique (3e année)
> Maîtrisard en informatique
> Technicien en Réseau informatique et Télécoms
>  [+216] 52 72 27 25
> hamdi.thabe...@gmail.com
> *---Message original---*
>
>  *De :* Maxim Solodovnik 
> *Date :* 04/01/12 06:40:40
> *A :* openmeetings-user@incubator.apache.org
> *Sujet :* Re: Settting up a development environment
>
>
> -- if there will be convertion errors...
> Sorry
> On Apr 1, 2012 12:32 PM, "Maxim Solodovnik"  wrote:
>
> Hello Hamdi.
>
> Unfortunately I had no time yesterday and most probably will not have time
> today :(
>
> Please try to install all required software (LibreOffice/OppenOffice, sox,
> ffmpeg etc.) to the path with no spaces (like d:\apps\LO35, d:\apps\ffmpeg
> etc)
>
> If there will be convertion please send me its text
>
> I was unable to set up convertion on my win-win machine. (I can only set
> in up on *nix Ubuntu/debian/centos)
>
> I'll keep trying, but not sure how much time it will take
> On Sun, Apr 1, 2012 at 02:08, Hamdi Thabet wrote:
>  Maxim can we do an essay with teamviewer ? Are you available now ?
>
>
>
> --
> WBR
> Maxim aka solomax
>
>



-- 
WBR
Maxim aka solomax
<><<47_g_letter.gif>><<26_f_cell.gif>><<608-1041a.jpg>>

Re: Réf. : Re: Réf. : Re: Réf. : Re: Réf. : Re: File importing HTTP-ERROR:500 + SMTP configuration ?

[Maxim Solodovnik]

I'm afraid we need to change code to use this (If I'm not mistaken we are
creating separate jvm for this)

On Mon, Apr 2, 2012 at 15:36, seba.wag...@gmail.com
wrote:

> No you might test to add a variable:
> office.home with the path to your Open Office installation.
>
> Sebastian
>
>
> 2012/4/2 Hamdi THABET 
>
>>For me : "C:\Program Files (x86)\OpenOffice.org 3"
>> it's not working too !
>> office.home ???
>> Is it necessary to add "C:\Program Files (x86)\OpenOffice.org 3" to the
>> system path ?
>>
>
>
>
> --
> Sebastian Wagner
> https://twitter.com/#!/dead_lock
> http://www.openmeetings.de 
> http://www.webbase-design.de
> http://www.wagner-sebastian.com
> seba.wag...@gmail.com
>



-- 
WBR
Maxim aka solomax
<<608-1041a.jpg>>

Re: RTMPS, error while starting red5

[Maxim Solodovnik]

I also thought this step is missing
but instruction says: download  jee-container-ssl.xml  to
jee-container.xml

in other words replace contents of  jee-container.xml with
jee-container-ssl.xml

this is why I haven't changed instruction.


On Mon, Apr 2, 2012 at 16:33,  wrote:

>  While we are looking at the
> http://incubator.apache.org/openmeetings/RTMPSAndHTTPS.html howto, I've
> found a missing step when you want to configure HTTPS:
> In order to have the jee-container-ssl.xml container loaded, you need to
> update red5.xml by adding the following line (just before the last ):
> 
>
> This is at least what is missing when using 
> openmeetings_1_9_1_r4707.zip<http://code.google.com/p/openmeetings/downloads/detail?name=openmeetings_1_9_1_r4707.zip&can=2&q=>
> .
>
> Regards,
> Thibault
>
>
> Le 02/04/2012 10:01, Thibault Le Meur a écrit :
>
> Le 30/03/2012 19:52, Maxim Solodovnik a écrit :
>
> great
> I'll update the documentation at
> http://incubator.apache.org/openmeetings/RTMPSAndHTTPS.html
>
>
> Thanks,
> Not however that this page is not working for the latest stable version
> available on code.google.com 
> (openmeetings_1_9_1_r4707.zip<http://code.google.com/p/openmeetings/downloads/detail?name=openmeetings_1_9_1_r4707.zip&can=2&q=>),
> because the default RTMPS section is "faulty". It works ok with the default
> RTMPS section from the Apache Incubator SVN trunk.
>
> Regards,
> Thibault
>
>
>


-- 
WBR
Maxim aka solomax

Re: RTMPS, error while starting red5

[Maxim Solodovnik]

I think it does make sense.
I'll correct the document as soon as I can test RTMPS for ScreenSharing
client.

On Mon, Apr 2, 2012 at 16:54,  wrote:

>  You're right: I didn't figure out that the name of the downloaded file
> was different from the name of the target file.
>
> Why not modify the "download xxx TO yyy" to "replace contents of
> jee-container.xml with  jee-container-ssl.xml" ?
> Or even better: "download jee-container-ssl.xml, then copy it to
> re5/conf/jee-container.xml (overwritting the existing file)".
> It sounds less ambiguous. What do you think ?
>
> Thibault
>
>
>
> Le 02/04/2012 11:49, Maxim Solodovnik a écrit :
>
> I also thought this step is missing
> but instruction says: download  jee-container-ssl.xml  to
> jee-container.xml
>
>  in other words replace contents of  jee-container.xml with
> jee-container-ssl.xml
>
>  this is why I haven't changed instruction.
>
>
> On Mon, Apr 2, 2012 at 16:33,  wrote:
>
>>  While we are looking at the
>> http://incubator.apache.org/openmeetings/RTMPSAndHTTPS.html howto, I've
>> found a missing step when you want to configure HTTPS:
>> In order to have the jee-container-ssl.xml container loaded, you need to
>> update red5.xml by adding the following line (just before the last ):
>> 
>>
>> This is at least what is missing when using 
>> openmeetings_1_9_1_r4707.zip<http://code.google.com/p/openmeetings/downloads/detail?name=openmeetings_1_9_1_r4707.zip&can=2&q=>
>> .
>>
>> Regards,
>> Thibault
>>
>>
>> Le 02/04/2012 10:01, Thibault Le Meur a écrit :
>>
>> Le 30/03/2012 19:52, Maxim Solodovnik a écrit :
>>
>> great
>> I'll update the documentation at
>> http://incubator.apache.org/openmeetings/RTMPSAndHTTPS.html
>>
>>
>> Thanks,
>> Not however that this page is not working for the latest stable version
>> available on code.google.com 
>> (openmeetings_1_9_1_r4707.zip<http://code.google.com/p/openmeetings/downloads/detail?name=openmeetings_1_9_1_r4707.zip&can=2&q=>),
>> because the default RTMPS section is "faulty". It works ok with the default
>> RTMPS section from the Apache Incubator SVN trunk.
>>
>> Regards,
>> Thibault
>>
>>
>>
>
>
>  --
> WBR
> Maxim aka solomax
>
>
>


-- 
WBR
Maxim aka solomax

Re: going in production mode: reducing logs and database choice

[Maxim Solodovnik]

1) you need to edit red5/conf/logback.xml
2) mysql performance is better

On Wed, Apr 4, 2012 at 15:19, Thibault Le Meur
wrote:

>  Hi,
>
> Before going in production mode, I'd like to know:
> 1- if it's possible to decrease the loging level from the defautl DEBUG to
> simple Warnings (seems it's not based on log4j anymore)
> 2- what is the best database to use (the default derby, or mysql).
>
> Installed version is 
> openmeetings_1_9_1_r4707
>
> Thanks in advance,
> Thibault
>



-- 
WBR
Maxim aka solomax

Re: going in production mode: reducing logs and database choice

[Maxim Solodovnik]

It can be only tested with latest nightly.
I'm going to test it in 1-2 days (need to set up OM on the server with
"real" certificate)

On Wed, Apr 4, 2012 at 16:48, Thibault Le Meur
wrote:

>  Thanks a lot Maxim for these answers.
>
> By the way have you been able to test the screen sharing application with
> RTMPS ?
> I've tested with 
> openmeetings_1_9_1_r4707<http://code.google.com/p/openmeetings/downloads/detail?name=openmeetings_1_9_1_r4707.zip>and
>  it's not working (it tries to connect with the standard RTMP port).
>
> Thibault
>
> Le 04/04/2012 11:32, Maxim Solodovnik a écrit :
>
> 1) you need to edit red5/conf/logback.xml
> 2) mysql performance is better
>
> On Wed, Apr 4, 2012 at 15:19, Thibault Le Meur  > wrote:
>
>>  Hi,
>>
>> Before going in production mode, I'd like to know:
>> 1- if it's possible to decrease the loging level from the defautl DEBUG
>> to simple Warnings (seems it's not based on log4j anymore)
>> 2- what is the best database to use (the default derby, or mysql).
>>
>> Installed version is 
>> openmeetings_1_9_1_r4707<http://code.google.com/p/openmeetings/downloads/detail?name=openmeetings_1_9_1_r4707.zip>
>>
>> Thanks in advance,
>> Thibault
>>
>
>
>
>  --
> WBR
> Maxim aka solomax
>
>
>


-- 
WBR
Maxim aka solomax

Re: security t'chat

[Maxim Solodovnik]

You can create room the the certain org, and chat in it ...

On Thu, Apr 5, 2012 at 17:31, clement mutz  wrote:

> **
> No, People see themselves among different orgs in the tchat. is this
> normal?
>
>
> Le 05/04/2012 11:47, Alexei Fedotov a écrit :
>
> I mean the following. Could people among different orgs see each other now?
> 05.04.2012 12:28 пользователь "clement mutz"  написал:
>
>>  hi !
>>
>> I want that users do not see themselves between two different
>> organizations. In thechat menu. is it possible?
>>
>
>


-- 
WBR
Maxim aka solomax

Re: RTMPS, error while starting red5

[Maxim Solodovnik]

Hello Thibault,

can you please check if ScreenSharing over rtpms works for you?
Unfortunately I'm unable to test it since I have no site with valid
certificate.

Thanks in advance

On Mon, Apr 2, 2012 at 16:57, Maxim Solodovnik  wrote:

> I think it does make sense.
> I'll correct the document as soon as I can test RTMPS for ScreenSharing
> client.
>
>
> On Mon, Apr 2, 2012 at 16:54,  wrote:
>
>>  You're right: I didn't figure out that the name of the downloaded file
>> was different from the name of the target file.
>>
>> Why not modify the "download xxx TO yyy" to "replace contents of
>> jee-container.xml with  jee-container-ssl.xml" ?
>> Or even better: "download jee-container-ssl.xml, then copy it to
>> re5/conf/jee-container.xml (overwritting the existing file)".
>> It sounds less ambiguous. What do you think ?
>>
>> Thibault
>>
>>
>>
>> Le 02/04/2012 11:49, Maxim Solodovnik a écrit :
>>
>> I also thought this step is missing
>> but instruction says: download  jee-container-ssl.xml  to
>> jee-container.xml
>>
>>  in other words replace contents of  jee-container.xml with
>> jee-container-ssl.xml
>>
>>  this is why I haven't changed instruction.
>>
>>
>> On Mon, Apr 2, 2012 at 16:33,  wrote:
>>
>>>  While we are looking at the
>>> http://incubator.apache.org/openmeetings/RTMPSAndHTTPS.html howto, I've
>>> found a missing step when you want to configure HTTPS:
>>> In order to have the jee-container-ssl.xml container loaded, you need to
>>> update red5.xml by adding the following line (just before the last ):
>>> 
>>>
>>> This is at least what is missing when using 
>>> openmeetings_1_9_1_r4707.zip<http://code.google.com/p/openmeetings/downloads/detail?name=openmeetings_1_9_1_r4707.zip&can=2&q=>
>>> .
>>>
>>> Regards,
>>> Thibault
>>>
>>>
>>> Le 02/04/2012 10:01, Thibault Le Meur a écrit :
>>>
>>> Le 30/03/2012 19:52, Maxim Solodovnik a écrit :
>>>
>>> great
>>> I'll update the documentation at
>>> http://incubator.apache.org/openmeetings/RTMPSAndHTTPS.html
>>>
>>>
>>> Thanks,
>>> Not however that this page is not working for the latest stable version
>>> available on code.google.com 
>>> (openmeetings_1_9_1_r4707.zip<http://code.google.com/p/openmeetings/downloads/detail?name=openmeetings_1_9_1_r4707.zip&can=2&q=>),
>>> because the default RTMPS section is "faulty". It works ok with the default
>>> RTMPS section from the Apache Incubator SVN trunk.
>>>
>>> Regards,
>>> Thibault
>>>
>>>
>>>
>>
>>
>>  --
>> WBR
>> Maxim aka solomax
>>
>>
>>
>
>
> --
> WBR
> Maxim aka solomax
>



-- 
WBR
Maxim aka solomax

Re: security t'chat

[Maxim Solodovnik]

I'm afraid this is currently not implemented.
There is chat for all users
and chat for the room

Organizations is just group of users


On Thu, Apr 5, 2012 at 17:57, clement mutz  wrote:

> **
> Le 05/04/2012 12:45, Maxim Solodovnik a écrit :
>
> You can create room the the certain org, and chat in it ...
>
>  Yes, i can. but i would like to do a tchat with same orgs without create
> room.
>
>  On Thu, Apr 5, 2012 at 17:31, clement mutz  wrote:
>
>>  No, People see themselves among different orgs in the tchat. is this
>> normal?
>>
>>
>> Le 05/04/2012 11:47, Alexei Fedotov a écrit :
>>
>> I mean the following. Could people among different orgs see each other
>> now?
>> 05.04.2012 12:28 пользователь "clement mutz"  написал:
>>
>>>  hi !
>>>
>>> I want that users do not see themselves between two different
>>> organizations. In thechat menu. is it possible?
>>>
>>
>>
>
>
>  --
> WBR
> Maxim aka solomax
>
>
>


-- 
WBR
Maxim aka solomax

Re: Shell script to delete unsused streams and report stream diskspace usage

[Maxim Solodovnik]

Hello Thibault,

Rhanks for your effort.
I'll take a look at this script. As an alternative to the reverse
engineering I can propose command line tool using Java.
Or maybe extend current command line admin (OPENMEETINGS-111)
On Apr 6, 2012 5:28 PM, "Thibault Le Meur" 
wrote:

> Hi,
>
> It seems that OM doesn't delete streams form the filesystem. Thus I
> needed a way to track diskspace usage of streams so I developped a "not
> so quick and yet dirty script" to do the following tasks:
> * delete streams marked as deleted in OpenMeetings DB from the filesystem
> * report diskspace used by not deleted streams with associated
> information (owner, room, ...)
> * report diskspace per user, and send an overquota email if needed
> * report streams older than and Expiration duration threshold and send
> an expriation email if needed
>
> It requires:
> * linux system
> * openmeetings with mysql DB (tested on openmeetings_1_9_1_r4707)
> * mysql client, a mysqk user able to do selects to the OM DB
> * usual linux tools like cut, awk, sed and bash 4.x
>
> It comes with no warranty as I had to reverse engineer the DB to
> understand how streams ar recorded and marked as deleted and I'm quite
> sure there are things I missed so It may be considered as a "template".
> I just post it here, in case it can prove to be usefull to someone.
>
> Now I would need help on how uploaded files are recorded to filesystem
> and DB to do the same for these ones. If anyone can help me... ;-)
>
> Regards,
> Thibault
>

Re: Shell script to delete unsused streams and report stream diskspace usage

[Maxim Solodovnik]

I will add multi-OS and multi-DB version of this.
I guess having cleanup capabilities is vital while storing video files ...

On Fri, Apr 6, 2012 at 22:58, Thibault Le Meur
wrote:

> Hi Alexei,
>
> I knopw about jira contributions, but I don't think this should be
> included into the OM disrtibutions.
> Looks more like a "tip and tricks" item, you know, things you put in a
> wiki, than a script to be added to the distribution (as I've said it's
> quick and dirty).
> It can be used until OM has it's own clean way of handling these
> operations (User quota, file expirations, ...).
>
> By the way, here is the little brother of the first script, aimed at
> dealing with files uploaded to rooms.
>
> Regards,
> Thibault
>
> Le 06/04/2012 12:56, Alexei Fedotov a écrit :
> > Thibault,
> >
> > thanks for your contribution. The recommended way is to contribute via
> > jira attachment, in that case you transfer rights to ASF correctly.
> >
> > --
> > With best regards / с наилучшими пожеланиями,
> > Alexei Fedotov / Алексей Федотов,
> > http://dataved.ru/
> > +7 916 562 8095
> >
> >
> >
> > On Fri, Apr 6, 2012 at 2:28 PM, Thibault Le Meur
> >  wrote:
> >> Hi,
> >>
> >> It seems that OM doesn't delete streams form the filesystem. Thus I
> >> needed a way to track diskspace usage of streams so I developped a "not
> >> so quick and yet dirty script" to do the following tasks:
> >> * delete streams marked as deleted in OpenMeetings DB from the
> filesystem
> >> * report diskspace used by not deleted streams with associated
> >> information (owner, room, ...)
> >> * report diskspace per user, and send an overquota email if needed
> >> * report streams older than and Expiration duration threshold and send
> >> an expriation email if needed
> >>
> >> It requires:
> >> * linux system
> >> * openmeetings with mysql DB (tested on openmeetings_1_9_1_r4707)
> >> * mysql client, a mysqk user able to do selects to the OM DB
> >> * usual linux tools like cut, awk, sed and bash 4.x
> >>
> >> It comes with no warranty as I had to reverse engineer the DB to
> >> understand how streams ar recorded and marked as deleted and I'm quite
> >> sure there are things I missed so It may be considered as a "template".
> >> I just post it here, in case it can prove to be usefull to someone.
> >>
> >> Now I would need help on how uploaded files are recorded to filesystem
> >> and DB to do the same for these ones. If anyone can help me... ;-)
> >>
> >> Regards,
> >> Thibault
>
>


-- 
WBR
Maxim aka solomax

Re: Shell script to delete unsused streams and report stream diskspace usage

[Maxim Solodovnik]

Thanks for the idea :)

On Fri, Apr 6, 2012 at 23:11,  wrote:

> Le 06/04/2012 18:05, Maxim Solodovnik a écrit :
> > I will add multi-OS and multi-DB version of this.
> > I guess having cleanup capabilities is vital while storing video files
> ...
> >
>
> Ok.
>
> I haven't replied to the licensing question.
> I see no issue in licensing my own work as ASF, however I used some
> cut/paste code taken from webpages on the Net (essentially the
> bytesToHuman and isNotSet functions), so I'm not sure if I can impose an
> ASF licence to it.
>
> Thibault
>
>


-- 
WBR
Maxim aka solomax

Re: Réf. : Re: Réf. : Re: Question about "users" table in DB

[Maxim Solodovnik]

openmeetings.users table already have column deleted
The record is treated as deleted if value in this column is varchar 'true'

On Sat, Apr 14, 2012 at 21:44, Hamdi THABET wrote:

>"To flag records as deleted" is a very good idea ! I'm working on it.
>
>
>


-- 
WBR
Maxim aka solomax
<<608-1041a.jpg>>

Re: How is OpenMeetings Video Encoded?

[Maxim Solodovnik]

Hello Dan,

the video is encoded with "Flash Screen codec V1" as described in this
document:
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/swf/pdf/swf_file_format_spec_v10.pdf
"Screen Video bitstream format" section

I have in plans implementing "Screen Video V2 bitstream format", but have
no time right now :(

On Sun, Apr 15, 2012 at 03:41, Daniel Ascher  wrote:

> Hi all:
>
> Can someone please provide me with the specific on how OpenMeetings
> recordings are encoded?
>
> Thanks.
>
> Dan
>
> --
> Daniel Ascher, M.Ed.
> President
> A+ Test Prep and Tutoring
> "Creating Bright Futures"
>
> 505 York Road, Suite 6
> Jenkintown, PA 19046
> Office: 215.886.9188
> www.aplustutoring.com
>



-- 
WBR
Maxim aka solomax

Re: Why we need to restart the Red5 server after a new install ?

[Maxim Solodovnik]

I guess this is somehow connected with lazy fetching.

@Sebastian is it OK if I investigate this?
On Apr 17, 2012 7:06 PM, "Hamdi THABET"  wrote:

>This problem wasn't in previous builds of OM 2.0 >>
>
> http://www.youtube.com/watch?v=4W-mNFvqq7o
>
>
>
>  *Hamdi THABET
> *Élève ingénieur en Téléinformatique (3e année)
> Maîtrisard en informatique
> Technicien en Réseau informatique et Télécoms
>  [+216] 52 72 27 25
> hamdi.thabe...@gmail.com
>
<<608-1041a.jpg>><><<47_g_letter.gif>><<26_f_cell.gif>>

Re: Meeting Invite email address

[Maxim Solodovnik]

Actually we can set additional ReplyTo field of the email (it might differ
from From field)
I can investigate if you wish.

On Thu, Apr 19, 2012 at 20:10, seba.wag...@gmail.com
wrote:

> All emails are processed by the email server that you configure in
> Administration > Configuration (or during installation)
> The "From" field is what the user would see as "Reply To" email.
> If we change the From field to be always the email of any user xy from
> OpenMeetings instead of a static one the email server might reject sending
> the email (depends on configuration of the email server).
>
>
> Sebastian
>
> 2012/4/19 Heather Bissell 
>
>> Ok. What do you mean by ”emails send by non-recipients in the from field
>> might be not accepted by all email servers”.
>>
>> ** **
>>
>> Thanks
>>
>> Heather 
>>
>>
>> ___
>> 
>>
>> Heather Bissell | *CMT* - Computer Management Technologies, Inc.|731
>> Gratiot Ave. • Saginaw , MI  48602
>>
>> ( 989.791.4860 ext. 131 |7 989.791.4928 |*  *hbiss...@cmtonline.com*
>>
>> ** **
>>
>> *An Employee Owned Company * *"Striving to Serve with Excellence"***
>>
>> ** **
>>
>> Disclaimer: This electronic mail transmission is privileged and
>> confidential and is intended only for the use by the party to whom it is
>> addressed. 
>>
>> If you have received this transmission in error, please disregard and
>> notify the sender.
>>
>> ** **
>>
>> *From:* seba.wag...@gmail.com [mailto:seba.wag...@gmail.com]
>> *Sent:* Thursday, April 19, 2012 9:00 AM
>> *To:* openmeetings-user@incubator.apache.org
>> *Subject:* Re: Meeting Invite email address
>>
>> ** **
>>
>> There is no easy way of doing that.
>> We cannot implement this as default option as emails send by non
>> receipents in the from field might be not accepted by all email servers.
>>
>> Sebastian
>>
>> 2012/4/19 Heather Bissell 
>>
>> Good morning,
>>
>>  
>>
>> I have openmeetings_1_9_1_r4707 installed on Debian Squeeze.
>>
>> All meeting invites are sent out by the configured system_email_addr. How
>> do I get them to go out via the user that is creating the meeting, so that
>> attendees can respond to them directly and not the system email address?*
>> ***
>>
>>  
>>
>> Thanks
>>
>> Heather 
>>
>>
>> ___
>> 
>>
>> Heather Bissell | *CMT* - Computer Management Technologies, Inc.|731
>> Gratiot Ave. • Saginaw , MI  48602
>>
>> ( 989.791.4860 ext. 131 |7 989.791.4928 |*  *hbiss...@cmtonline.com*
>>
>>  
>>
>> *An Employee Owned Company * *"Striving to Serve with Excellence"*
>>
>>  
>>
>> Disclaimer: This electronic mail transmission is privileged and
>> confidential and is intended only for the use by the party to whom it is
>> addressed. 
>>
>> If you have received this transmission in error, please disregard and
>> notify the sender.
>>
>>  
>>
>>
>>
>>
>> --
>> Sebastian Wagner
>> https://twitter.com/#!/dead_lock
>> http://www.openmeetings.de
>> http://www.webbase-design.de
>> http://www.wagner-sebastian.com
>> seba.wag...@gmail.com
>>
>
>
>
> --
> Sebastian Wagner
> https://twitter.com/#!/dead_lock
> http://www.openmeetings.de
> http://www.webbase-design.de
> http://www.wagner-sebastian.com
> seba.wag...@gmail.com
>



-- 
WBR
Maxim aka solomax

RE: Meeting Invite email address

[Maxim Solodovnik]

Should this behavior be hardcoded or configurable?
 On Apr 19, 2012 10:16 PM, "Heather Bissell"  wrote:

> Maxim,
>
> ** **
>
> That would be great. I really need anyone replying to the invite to replay
> to the user that created the meeting.
>
> ** **
>
> Thanks
>
> Heather 
>
>
> ___
> 
>
> Heather Bissell | *CMT* - Computer Management Technologies, Inc.|731
> Gratiot Ave. • Saginaw , MI  48602
>
> ( 989.791.4860 ext. 131 |7 989.791.4928 |*  *hbiss...@cmtonline.com*
>
> ** **
>
> *An Employee Owned Company * *"Striving to Serve with Excellence"***
>
> ** **
>
> Disclaimer: This electronic mail transmission is privileged and
> confidential and is intended only for the use by the party to whom it is
> addressed. 
>
> If you have received this transmission in error, please disregard and
> notify the sender.
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Thursday, April 19, 2012 10:11 AM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: Meeting Invite email address
>
> ** **
>
> Actually we can set additional ReplyTo field of the email (it might differ
> from From field)
>
> I can investigate if you wish.
>
> On Thu, Apr 19, 2012 at 20:10, seba.wag...@gmail.com <
> seba.wag...@gmail.com> wrote:
>
> All emails are processed by the email server that you configure in
> Administration > Configuration (or during installation)
> The "From" field is what the user would see as "Reply To" email.
> If we change the From field to be always the email of any user xy from
> OpenMeetings instead of a static one the email server might reject sending
> the email (depends on configuration of the email server).
>
>
>
> Sebastian
>
> 2012/4/19 Heather Bissell 
>
> Ok. What do you mean by ”emails send by non-recipients in the from field
> might be not accepted by all email servers”.
>
>  
>
> Thanks
>
> Heather 
>
>
> ___
> 
>
> Heather Bissell | *CMT* - Computer Management Technologies, Inc.|731
> Gratiot Ave. • Saginaw , MI  48602
>
> ( 989.791.4860 ext. 131 |7 989.791.4928 |*  *hbiss...@cmtonline.com*
>
>  
>
> *An Employee Owned Company * *"Striving to Serve with Excellence"*
>
>  
>
> Disclaimer: This electronic mail transmission is privileged and
> confidential and is intended only for the use by the party to whom it is
> addressed. 
>
> If you have received this transmission in error, please disregard and
> notify the sender.
>
>  
>
> *From:* seba.wag...@gmail.com [mailto:seba.wag...@gmail.com]
> *Sent:* Thursday, April 19, 2012 9:00 AM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: Meeting Invite email address
>
>  
>
> There is no easy way of doing that.
> We cannot implement this as default option as emails send by non
> receipents in the from field might be not accepted by all email servers.
>
> Sebastian
>
> 2012/4/19 

Re: Meeting Invite email address

[Maxim Solodovnik]

https://issues.apache.org/jira/browse/OPENMEETINGS-186

On Thu, Apr 19, 2012 at 23:29, Heather Bissell wrote:

> I say you should have it configurable. Say something like a configuration
> setting in the DB where if the reply-to field is left blank use the email
> address of the user that is creating the email and if it is not left blank
> use whatever email address that is put in there. Or it could be a boolean
> field: reply-to = ‘Y’ then use the users email address, if reply-to = ‘N’
> then use the system_email_addr. The boolean option may be easier, but I
> am not sure. As of this point, I have not looked at any source code.
>
> ** **
>
> Thanks
>
> Heather 
>
>
> ___
> 
>
> Heather Bissell | *CMT* - Computer Management Technologies, Inc.|731
> Gratiot Ave. • Saginaw , MI  48602
>
> ( 989.791.4860 ext. 131 |7 989.791.4928 |*  *hbiss...@cmtonline.com*
>
> ** **
>
> *An Employee Owned Company * *"Striving to Serve with Excellence"***
>
> ** **
>
> Disclaimer: This electronic mail transmission is privileged and
> confidential and is intended only for the use by the party to whom it is
> addressed. 
>
> If you have received this transmission in error, please disregard and
> notify the sender.
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Thursday, April 19, 2012 12:21 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* RE: Meeting Invite email address
>
> ** **
>
> Should this behavior be hardcoded or configurable?
>
> On Apr 19, 2012 10:16 PM, "Heather Bissell" 
> wrote:
>
> Maxim,
>
>  
>
> That would be great. I really need anyone replying to the invite to replay
> to the user that created the meeting.
>
>  
>
> Thanks
>
> Heather 
>
>
> ___
> 
>
> Heather Bissell | *CMT* - Computer Management Technologies, Inc.|731
> Gratiot Ave. • Saginaw , MI  48602
>
> ( 989.791.4860 ext. 131 |7 989.791.4928 |*  *hbiss...@cmtonline.com*
>
>  
>
> *An Employee Owned Company * *"Striving to Serve with Excellence"*
>
>  
>
> Disclaimer: This electronic mail transmission is privileged and
> confidential and is intended only for the use by the party to whom it is
> addressed. 
>
> If you have received this transmission in error, please disregard and
> notify the sender.
>
>  
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Thursday, April 19, 2012 10:11 AM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: Meeting Invite email address
>
>  
>
> Actually we can set additional ReplyTo field of the email (it might differ
> from From field)
>
> I can investigate if you wish.
>
> On Thu, Apr 19, 2012 at 20:10, seba.wag...@gmail.com <
> seba.wag...@gmail.com> wrote:
>
> All emails are processed by the email server that you configure in
> Administration > Configuration (or during installation)
> The "From" field is what the user would see as "Reply To" email.
> If we change the From field to be always the email of an

Re: Problem with outlook calendar ics

[Maxim Solodovnik]

Unable to reproduce
Om version: 2.0 (trunk)
Win 7 x32 + Outlook 2007 (no exchange)

please retest with the latest version of OM and file JIRA issue with
detailed steps if still reproducible

2012/3/6 Mateus Interciso TIC 

> It’s version 1.9.1.r4707
>
> ** **
>
> *De:* seba.wag...@gmail.com [mailto:seba.wag...@gmail.com]
> *Enviada em:* segunda-feira, 5 de março de 2012 14:10
> *Para:* openmeetings-user@incubator.apache.org
> *Assunto:* Re: Problem with outlook calendar ics
>
> ** **
>
> Which version of Openmeetings are you using?
>
> You might add a Bug Report for that in our issue tracker:
> https://issues.apache.org/jira/browse/OPENMEETINGS
>
> Thanks!
> Sebastian
>
> 2012/3/5 Mateus Interciso TIC 
>
> Hello guys, I’m having a problem with Openmeetings when I’m trying to
> schedule a meeting, and invite someone.
>
> Under Outlook 2007, the .ics shows as “not supported calendar
> message.ics”, if however I open it up, it shows just fine. I know this may
> be just something that Outlook is actually doing, but it is a problem to us.
> 
>
> I would appreciate any help under that.
>
>  
>
> Thank you very much!
>
>  
>
> 
>
>  
>
> *Mateus Interciso*
>
> Tecnologia da Informação
>
> Tel:  +55 11 5501 0055
>
> Cel:  +55 11 9208 8319 
>
> mateus.interc...@metodo.com.br
>
>  
>
> [image: Descrição: Descrição: logo_assinatura] 
> 
>
> *Este documento pode incluir informação confidencial e de propriedade
> restrita da Método Engenharia S.A. e apenas pode ser lido por aquele(s) a
> qual o mesmo tenha sido endereçado. Se você recebeu essa mensagem de e-mail
> indevidamente, por favor avise-nos imediatamente. Quaisquer opiniões ou
> informações expressadas neste e-mail pertencem ao seu remetente e não
> necessariamente coincidem com aquelas da Método Engenharia. Este documento
> não pode ser reproduzido, copiado, distribuído, publicado ou modificado por
> terceiros, sem a prévia autorizaço por escrito da Método Engenharia. **
> **P** **Antes de imprimir, pense em sua responsabilidade e compromisso
> com o MEIO AMBIENTE.*
>
>  
>
>
>
>
> --
> Sebastian Wagner
> http://www.openmeetings.de
> http://incubator.apache.org/openmeetings/
> http://www.webbase-design.de
> http://www.wagner-sebastian.com
> seba.wag...@gmail.com
>



-- 
WBR
Maxim aka solomax
<><>

Re: Meeting Invite email address

[Maxim Solodovnik]

I remember I had problems with JODConverter on windows (works as expected
on Ubuntu)

On Fri, Apr 20, 2012 at 14:36, seba.wag...@gmail.com
wrote:

> We should update the docs to reflect results of issue 186 ( and 111 )
>
> Issue 186 could go into:
> http://incubator.apache.org/openmeetings/GeneralConfiguration.html
>
> I think 111 will require some bigger changes to:
> http://incubator.apache.org/openmeetings/installation.html
> and
> http://incubator.apache.org/openmeetings/Upgrade.html
>
> I think I just gonna replace the image with the 3 steps. I should have the
> authoring file for the image still somewhere.
> I don't want to blow up the whole website with the installation, that
> would make it look like complex where it is simple.
> But the step for the changes that I've done regarding JODConverter
> installation is also missing yet and the configuration for OpenOffice is
> just wrong now I guess. JODConverter is normally configured that way that
> it starts OO on its own and closes it again (Kind of smart!)
>
> Also for the new release we will have to replace the screenshots.
>
>
> Sebastian
>
>
> 2012/4/20 Maxim Solodovnik 
>
>> https://issues.apache.org/jira/browse/OPENMEETINGS-186
>>
>>
>> On Thu, Apr 19, 2012 at 23:29, Heather Bissell wrote:
>>
>>> I say you should have it configurable. Say something like a
>>> configuration setting in the DB where if the reply-to field is left blank
>>> use the email address of the user that is creating the email and if it is
>>> not left blank use whatever email address that is put in there. Or it could
>>> be a boolean field: reply-to = ‘Y’ then use the users email address, if
>>> reply-to = ‘N’ then use the system_email_addr. The boolean option may
>>> be easier, but I am not sure. As of this point, I have not looked at any
>>> source code.
>>>
>>> ** **
>>>
>>> Thanks
>>>
>>> Heather 
>>>
>>>
>>> ___
>>> 
>>>
>>> Heather Bissell | *CMT* - Computer Management Technologies, Inc.|731
>>> Gratiot Ave. • Saginaw , MI  48602
>>>
>>> ( 989.791.4860 ext. 131 |7 989.791.4928 |*  *hbiss...@cmtonline.com*
>>>
>>> ** **
>>>
>>> *An Employee Owned Company * *"Striving to Serve with Excellence"***
>>>
>>> ** **
>>>
>>> Disclaimer: This electronic mail transmission is privileged and
>>> confidential and is intended only for the use by the party to whom it is
>>> addressed. 
>>>
>>> If you have received this transmission in error, please disregard and
>>> notify the sender.
>>>
>>> ** **
>>>
>>> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
>>> *Sent:* Thursday, April 19, 2012 12:21 PM
>>> *To:* openmeetings-user@incubator.apache.org
>>> *Subject:* RE: Meeting Invite email address
>>>
>>> ** **
>>>
>>> Should this behavior be hardcoded or configurable?
>>>
>>> On Apr 19, 2012 10:16 PM, "Heather Bissell" 
>>> wrote:
>>>
>>> Maxim,
>>>
>>>  
>>>
>>> That would be great. I really need anyone replying to the invite to
>>> replay to the user that created the meeting.
>>>
>>>  
>>>
>>> Thanks
>>>
>>> Heather 
>>>
>>>
>>> __

Re: Meeting Invite email address

[Maxim Solodovnik]

I have updated
GeneralConfiguration<http://incubator.apache.org/openmeetings/GeneralConfiguration.html>
regarding
186

On Fri, Apr 20, 2012 at 14:51, Maxim Solodovnik wrote:

> I remember I had problems with JODConverter on windows (works as expected
> on Ubuntu)
>
>
> On Fri, Apr 20, 2012 at 14:36, seba.wag...@gmail.com <
> seba.wag...@gmail.com> wrote:
>
>> We should update the docs to reflect results of issue 186 ( and 111 )
>>
>> Issue 186 could go into:
>> http://incubator.apache.org/openmeetings/GeneralConfiguration.html
>>
>> I think 111 will require some bigger changes to:
>> http://incubator.apache.org/openmeetings/installation.html
>> and
>> http://incubator.apache.org/openmeetings/Upgrade.html
>>
>> I think I just gonna replace the image with the 3 steps. I should have
>> the authoring file for the image still somewhere.
>> I don't want to blow up the whole website with the installation, that
>> would make it look like complex where it is simple.
>> But the step for the changes that I've done regarding JODConverter
>> installation is also missing yet and the configuration for OpenOffice is
>> just wrong now I guess. JODConverter is normally configured that way that
>> it starts OO on its own and closes it again (Kind of smart!)
>>
>> Also for the new release we will have to replace the screenshots.
>>
>>
>> Sebastian
>>
>>
>> 2012/4/20 Maxim Solodovnik 
>>
>>> https://issues.apache.org/jira/browse/OPENMEETINGS-186
>>>
>>>
>>> On Thu, Apr 19, 2012 at 23:29, Heather Bissell 
>>> wrote:
>>>
>>>> I say you should have it configurable. Say something like a
>>>> configuration setting in the DB where if the reply-to field is left blank
>>>> use the email address of the user that is creating the email and if it is
>>>> not left blank use whatever email address that is put in there. Or it could
>>>> be a boolean field: reply-to = ‘Y’ then use the users email address, if
>>>> reply-to = ‘N’ then use the system_email_addr. The boolean option may
>>>> be easier, but I am not sure. As of this point, I have not looked at any
>>>> source code.
>>>>
>>>> ** **
>>>>
>>>> Thanks
>>>>
>>>> Heather 
>>>>
>>>>
>>>> ___
>>>> 
>>>>
>>>> Heather Bissell | *CMT* - Computer Management Technologies, Inc.|731
>>>> Gratiot Ave. • Saginaw , MI  48602
>>>>
>>>> ( 989.791.4860 ext. 131 |7 989.791.4928 |*  *hbiss...@cmtonline.com
>>>> *
>>>>
>>>> ** **
>>>>
>>>> *An Employee Owned Company * *"Striving to Serve with Excellence"***
>>>>
>>>> ** **
>>>>
>>>> Disclaimer: This electronic mail transmission is privileged and
>>>> confidential and is intended only for the use by the party to whom it is
>>>> addressed. 
>>>>
>>>> If you have received this transmission in error, please disregard and
>>>> notify the sender.
>>>>
>>>> ** **
>>>>
>>>> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
>>>> *Sent:* Thursday, April 19, 2012 12:21 PM
>>>> *To:* openmeetings-user@incubator.apache.org
>>>> *Subject:* RE: Meeting Invite email address
>>>>
>>>> ** **
>>>>
>>>> Should this behavior be hardcoded or configurable?
>>>>
>>>> On Apr 19, 2012 10:16 PM, "Heather Bissell" 
>>>> wrote:
>>>>
>>>> Maxim,
>>>>
>>>>  
>>>>
>>>> That would be great. I really need anyone replying to the invite to
>>>> replay to the user that created the meeting.
>>>>
>>>>  
>&g

Re: Video quality on high resolution

[Maxim Solodovnik]

There is no way to specify other codec for OM.
please search dev mailing list, there will be no other codecs until we
switch to SWF10/11

On Tue, Apr 24, 2012 at 17:49, Sergey Kobzar wrote:

> Thank you.
>
> Do I need remove previously installed codecs or how can I tell
> OpenMeetings to use codec below?
>
>
> On 04/24/12 11:46, Alexei Fedotov wrote:
>
>> http://en.wikipedia.org/wiki/**VP8 
>>
>> On Tue, Apr 24, 2012 at 10:57 AM, Sergey Kobzar
>>   wrote:
>>
>>> Alexei
>>>
>>> Could you give me links to Goole codecs or your flash please?
>>>
>>>
>>> On 04/24/12 09:50, Alexei Fedotov wrote:
>>>

 That's known flash issue. As for now we don't have a workarond. Some
 possible options include upgrading flash (in our build) or migrating to
 google codecs

 23.04.2012 22:05 пользователь "Sergey Kobzar">>> org 
 >
  написал:

>>>
>>


-- 
WBR
Maxim aka solomax

Re: Button ask a question

[Maxim Solodovnik]

[image: Inline image 1]

the button you asked for is hightlited with red



On Thu, Apr 26, 2012 at 10:35, Alexei Fedotov wrote:

> Could you please specify a room type?
> 25.04.2012 23:23 пользователь "Mayrand, Patrick" <
> patrick.mayr...@fadq.qc.ca> написал:
>
>> Thk Alexei
>>
>> Not for a poll. In a conference, if anyone has a question without the
>> chat.
>>
>> In room admin, i have this checkbox: " Allow user questions". Its for the
>> chat?
>>
>>
>>
>> -Message d'origine-
>> De : Alexei Fedotov [mailto:alexei.fedo...@gmail.com]
>> Envoyé : 25 avril 2012 15:12
>> À : openmeetings-user@incubator.apache.org
>> Objet : Re: Button ask a question
>>
>> If you need to start a poll, you need modrator permissions. A chat is
>> open for all.
>>
>> --
>> With best regards / с наилучшими пожеланиями,
>> Alexei Fedotov / Алексей Федотов,
>> http://dataved.ru/
>> +7 916 562 8095
>>
>>
>> On Wed, Apr 25, 2012 at 10:29 PM, Mayrand, Patrick
>>  wrote:
>> > Hi,
>> >
>> >
>> >
>> > Where is the button used to ask a question in a room?
>> >
>> >
>> >
>> > Thanks,
>> >
>> >
>> >
>> > Patrick
>> >
>> >
>>
>


-- 
WBR
Maxim aka solomax
<>

Re: screen sharing-multiple downloads

[Maxim Solodovnik]

Hello Mukesh,

The files are not identical, they have same name, but it's content is
slightly differs.
To check you can try to run previously downloaded *.jlnp file (say the file
downloaded yesterday or the day before yesterday) and you will be unable to
record or share screen.

On Tue, May 1, 2012 at 12:17, Mukesh Reddy wrote:

>  Hi Everyone,
>
> ** **
>
> I am getting multiple dowloads of screen share java-plugin,
> each time I click on the screen sharing option its’ giving a new file with
> save/discard option. Is there any possible way to use the same java plugin,
> the one downloaded at the starting and also to stop multiple downloads of
> the same file.
>
> ** **
>
> ** **
>
> Thanks and Regards,
>
> Mukesh Reddy,
>
> Java Associate Engineer,
>
> US TECH SOLUTIONS.Inc,
>
> Email :muk...@ustechsolutions.com
>
> ** **
>



-- 
WBR
Maxim aka solomax

Re: Réf. : Re: screen sharing-multiple downloads

[Maxim Solodovnik]

The only option is to set up your browser (if I'm not mistaken FF can open
jnlp files without download prompt)
I'm afraid 5 seconds timeout might not be good for every user. You can set
up screen region to share and exclude jnlp dialog.

On Tue, May 1, 2012 at 12:55, Hamdi THABET  wrote:

>Yes Maxim but maybe there's a solution to open the .jnlp without the
> download box of the navigator.
> Also it will much practical if the recording begin after a 5 seconds
> discount (for example). In this case we can avoid to record the .jnlp box
> because we have time to minimize it.
>



-- 
WBR
Maxim aka solomax
<<608-1041a.jpg>>

Re: How to increase the quality or resolution of converted PDF or PowerPoint files

[Maxim Solodovnik]

I'm using Ubuntu Desktop/server 11.10 and 12.04 both works as expected with
ant installed using apt-get

On Wed, May 2, 2012 at 10:15 AM, George Kirkham wrote:

> Stephen,
>
> ** **
>
> You were correct I was using the wrong version of ant so thanks for
> explaining to me how I could download and use the correct version.
>
> ** **
>
> My build fails with the error, if you know how to get resolve the error
> please let me know.  I expect that it will be something simple like not
> having any JAVA_HOME environment variable set, or the wrong version of Java
> ?  
>
> ** **
>
> -retrieve-openlaszlo:
>
> ** **
>
> compile.laszlo.main.debug:
>
>  [java] Compiling: maindebug.lzx to maindebug.swf8.swf
>
>  [java] Exception in thread "main"
> java.lang.IncompatibleClassChangeError: Found class
> com.sun.image.codec.jpeg.JPEGImageEncoder, but interface was expected
>
>  [java] at
> org.openlaszlo.iv.flash.api.image.JPEGBitmap.processImage(JPEGBitmap.java:186)
> 
>
>  [java] at
> org.openlaszlo.iv.flash.api.image.JPEGBitmap.write(JPEGBitmap.java:247)***
> *
>
> .
>
> .
>
> .
>
> ** **
>
> BUILD FAILED
>
> /home/itsupport/omApacheBuild2/singlewebapp/build.xml:387: Java returned: 1
> 
>
> ** **
>
> ** **
>
> Thanks,
>
> ** **
>
> George Kirkham
>
> ** **
>
> ** **
>
> *From:* Stephen Cottham [mailto:stephen.cott...@robertbird.com.au]
> *Sent:* Tuesday, 1 May 2012 7:11 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* RE: How to increase the quality or resolution of converted PDF
> or PowerPoint files
>
> ** **
>
> Hey George,
>
> ** **
>
> I’ll look at this before lunch.
>
> ** **
>
> Out of curiosity what was the issue you had with compiling?
>
> ** **
>
> If you are using Debian and got ant via *apt-get install ant* then this
> will fail as the version that gets installed doesn’t support the force
> option so you will need to download the binary from the apache ant web site:
> 
>
> ** **
>
> Example quick fix:
>
> ** **
>
> mkdir /usr/tmp/ant
>
> cd /usr/tmp/ant
>
> wget 
> http://mirror.rmg.io/apache//ant/binaries/apache-ant-1.8.3-bin.tar.gz
> 
>
> tar –zxvf apache-ant-1.8.3-bin.tar.gz
>
> ** **
>
> then cd to your svn OM directory (in this example =
> /usr/tmp/svn/openmeetings/trunk/singlewebapp/)
>
> ** **
>
> now issue
>
> ** **
>
> */usr/tmp/ant/apache-ant-1.8.3/bin/ant *
>
>
>
> This will use the 1.8.3 version of ant to compile the OM 2.
>
> ** **
>
> I’ll come back to you later with my tests.
>
> ** **
>
> Cheers
>
> ** **
>
> the –j flag?
>
>


-- 
WBR
Maxim aka solomax

Re: How to increase the quality or resolution of converted PDF or PowerPoint files

[Maxim Solodovnik]

the only package installed not from apt-get is java (Sun Java 1.6 is
required)
Libreoffice used as office application
there is no need to install red5 server and build essentials

On Wed, May 2, 2012 at 10:42 AM, George Kirkham wrote:

> Maxim,
>
>
> Thanks for you comments.
>
> ** **
>
> You said that your using Ubuntu and ant works. 
>
>  
>
> Is that a standard build of Ubuntu with no extra packages installed?  
>
> ** **
>
> Otherwise could you please tell me what other packages you have installed
> for running and compiling OpenMeetings and compiling ant (e.g. Java,
> swftools, sox, mysql, openoffice, imagemagick, gs-gpl, ffmpeg, red5 server,
> build-essentials, etc).   If other items were not installed by packages,
> then how they were installed.
>
> ** **
>
> Thanks,
>
> ** **
>
> George Kirkham
>
> ** **
>
> ** **
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Wednesday, 2 May 2012 1:34 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: How to increase the quality or resolution of converted PDF
> or PowerPoint files
>
> ** **
>
> I'm using Ubuntu Desktop/server 11.10 and 12.04 both works as expected
> with ant installed using apt-get
>
> On Wed, May 2, 2012 at 10:15 AM, George Kirkham 
> wrote:
>
> Stephen,
>
>  
>
> You were correct I was using the wrong version of ant so thanks for
> explaining to me how I could download and use the correct version.
>
>  
>
> My build fails with the error, if you know how to get resolve the error
> please let me know.  I expect that it will be something simple like not
> having any JAVA_HOME environment variable set, or the wrong version of Java
> ?  
>
>  
>
> -retrieve-openlaszlo:
>
>  
>
> compile.laszlo.main.debug:
>
>  [java] Compiling: maindebug.lzx to maindebug.swf8.swf
>
>  [java] Exception in thread "main"
> java.lang.IncompatibleClassChangeError: Found class
> com.sun.image.codec.jpeg.JPEGImageEncoder, but interface was expected
>
>  [java] at
> org.openlaszlo.iv.flash.api.image.JPEGBitmap.processImage(JPEGBitmap.java:186)
> 
>
>  [java] at
> org.openlaszlo.iv.flash.api.image.JPEGBitmap.write(JPEGBitmap.java:247)***
> *
>
> .
>
> .
>
> .
>
>  
>
> BUILD FAILED
>
> /home/itsupport/omApacheBuild2/singlewebapp/build.xml:387: Java returned: 1
> 
>
>  
>
>  
>
> Thanks,
>
>  
>
> George Kirkham
>
>  
>
>  
>
> *From:* Stephen Cottham [mailto:stephen.cott...@robertbird.com.au]
> *Sent:* Tuesday, 1 May 2012 7:11 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* RE: How to increase the quality or resolution of converted PDF
> or PowerPoint files
>
>  
>
> Hey George,
>
>  
>
> I’ll look at this before lunch.
>
>  
>
> Out of curiosity what was the issue you had with compiling?
>
>  
>
> If you are using Debian and got ant via *apt-get install ant* then this
> will fail as the version that gets installed doesn’t support the force
> option so you will need to download the binary from the apache ant web site:
> 
>
>  
>
> Example quick fix:
>
>  
>
> mkdir /usr/tmp/ant
>
> cd /usr/tmp/ant
>
> wget 
> http://mirror.rmg.io/apache//ant/binaries/apache-ant-1.8.3-bin.tar.gz<http://mirror.rmg.io/apache/ant/binaries/apache-ant-1.8.3-bin.tar.gz>
> 
>
> tar –zxvf apache-ant-1.8.3-bin.tar.gz
>
>  
>
> then cd to your svn OM directory (in this example =
> /usr/tmp/svn/openmeetings/trunk/singlewebapp/)
>
>  
>
> now issue
>
>  
>
> */usr/tmp/ant/apache-ant-1.8.3/bin/ant *
>
>
>
> This will use the 1.8.3 version of ant to compile the OM 2.
>
>  
>
> I’ll come back to you later with my tests.
>
>  
>
> Cheers
>
>  
>
> the –j flag?
>
>
>
> 
>
> ** **
>
> --
> WBR
> Maxim aka solomax
>



-- 
WBR
Maxim aka solomax

Re: How to increase the quality or resolution of converted PDF or PowerPoint files

[Maxim Solodovnik]

https://issues.apache.org/jira/browse/OPENMEETINGS-247



SebastianWagner<https://issues.apache.org/jira/secure/ViewProfile.jspa?name=swagner>
added
a comment - 01/May/12 07:02
Hi Georg,

I just added -j 100 to every convertion. I don't think anybody is
interested in adjusting this via configuration, the resulting SWFs are
pretty small anyway.


On Wed, May 2, 2012 at 1:57 PM, George Kirkham wrote:

> Maxim,
>
> ** **
>
> You said “Sebastian already add converter parameter”.
>
> ** **
>
> Can you tell me where to set the parameter, what it is called, and in
> which version it was introduced? - that would be very helpful.
>
> ** **
>
> Thanks,
>
> ** **
>
> George Kirkham
>
> ** **
>
> IT Manager
>
> Cooperative Research Centre For Greenhouse Gas Technologies (CO2CRC) 
>
> NFF House, 14 - 16 Brisbane Avenue, Barton, ACT, 2600, Australia
>
> T: (02) 6120 1600
>
> F: (02) 6273 7181****
>
> E: gkirk...@co2crc.com.au, 
>
> W: www.co2crc.com.au
>
> ** **
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Wednesday, 2 May 2012 3:42 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: How to increase the quality or resolution of converted PDF
> or PowerPoint files
>
> ** **
>
> Sebastian already add converter parameter
>
> please check the latest build
>
> On Wed, May 2, 2012 at 12:37 PM, George Kirkham 
> wrote:
>
> Hi,
>
>  
>
> To explain why I would like to increase the PowerPoint slide conversion
> process, please review the following clips from screen shots of an actual
> PowerPoint presentation slide and that of the slide as it is in
> OpenMeetings.
>
>  
>



-- 
WBR
Maxim aka solomax

Re: Réf. : Re: screen sharing-multiple downloads

[Maxim Solodovnik]

I don't know.
Actually it should be browser/system setting to
1) associate jlnp file with java/javaws
2) tell browser to open file without prompting to save it

On Wed, May 2, 2012 at 4:07 PM, Mukesh Reddy wrote:

>  Hi Maxim,
>
> 
>
> Thanks Maxim, it’s worked for me in Firefox. Is it
> possible to do the same in IE and chrome?
>
> ** **
>
> *Thanks and Regards,*
>
> *Mukesh Reddy,*
>
> *Java Associate Engineer,*
>
> *US TECH SOLUTIONS.Inc,*
>
> *Email :muk...@ustechsolutions.com***
>
> ** **
>
> ** **
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Tuesday, May 01, 2012 11:30 AM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: Réf. : Re: screen sharing-multiple downloads
>
> ** **
>
> The only option is to set up your browser (if I'm not mistaken FF can open
> jnlp files without download prompt)
>
> I'm afraid 5 seconds timeout might not be good for every user. You can set
> up screen region to share and exclude jnlp dialog.
>
> On Tue, May 1, 2012 at 12:55, Hamdi THABET 
> wrote:
>
> Yes Maxim but maybe there's a solution to open the .jnlp without the
> download box of the navigator.
>
> Also it will much practical if the recording begin after a 5 seconds
> discount (for example). In this case we can avoid to record the .jnlp box
> because we have time to minimize it. 
>
> 
>
>
>
> 
>
> ** **
>
> --
> WBR
> Maxim aka solomax
>



-- 
WBR
Maxim aka solomax
<>

Re: OpenMeetings just redirects to demo.openmeetings.de

[Maxim Solodovnik]

you need to go to
http://your_site:5080/openmeetings
instead of
http://your_site:5080/

On Wed, May 2, 2012 at 10:15 PM, Gary Franklin <
gfrank...@tapestrysolutions.com> wrote:

>  We’ve tried both the manual install and the VM and we get the same
> result for both.  When going to the website, we are immediately redirected
> to demo.openmeetings.de/openmeetings/.  Why is this and how do I keep the
> execution of the application solely within the VM?
>
> ** **
>
> Thanks.
>
> ** **
>



-- 
WBR
Maxim aka solomax

Re: Issue with editing users

[Maxim Solodovnik]

Maybe "server timezone" can be used in such case?
is it also fails - we can set it to GMT (to have this field NOT NULL)

On Wed, May 2, 2012 at 3:07 PM, seba.wag...@gmail.com  wrote:

> Seems like the problem is that your users have not timezone in their
> profile.
> I think this is a problem that is not addressed yet as there is no way of
> specifying a timezone for the LDAP imported users.
> You could fix that for now by stopping your red5 service and setting a
> timezone in the users table directly in the database in the column
> "omtimezoneId".
>
> I guess that should fix the error in saving the user profile.
>
> Sebastian
>
> 2012/5/1 Heather Bissell 
>
>> Here are the links for error and red5. The openmeetings log was too large
>> for the site so I have attached it.
>>
>> ** **
>>
>> error.log - http://pastebin.com/ELUPZ7Z1
>>
>> ** **
>>
>> red5.log - http://pastebin.com/e7xqCZ7a
>>
>> ** **
>>
>> Thanks
>>
>> Heather 
>>
>>
>> ___
>> 
>>
>> Heather Bissell | *CMT* - Computer Management Technologies, Inc.|731
>> Gratiot Ave. • Saginaw , MI  48602
>>
>> ( 989.791.4860 ext. 131 |7 989.791.4928 |*  *hbiss...@cmtonline.com*
>>
>> ** **
>>
>> *An Employee Owned Company * *"Striving to Serve with Excellence"***
>>
>> ** **
>>
>> Disclaimer: This electronic mail transmission is privileged and
>> confidential and is intended only for the use by the party to whom it is
>> addressed. 
>>
>> If you have received this transmission in error, please disregard and
>> notify the sender.
>>
>> ** **
>>
>> *From:* seba.wag...@gmail.com [mailto:seba.wag...@gmail.com]
>> *Sent:* Tuesday, May 01, 2012 2:59 AM
>> *To:* openmeetings-user@incubator.apache.org
>> *Subject:* Re: Issue with editing users
>>
>> ** **
>>
>> Hi Heather,
>>
>> could you please share your openmeetings.log/error.log/red5.log files?
>> You might cut and paste them somewhere to pastebin.com and just send the
>> links to the list here.
>>
>> Sebastian
>>
>> 2012/4/30 Heather Bissell 
>>
>> I think I found a bug…
>>
>>  
>>
>> I just upgraded my openmeetings server to
>> openmeetings-2.0.0.r1332014-29-04-2012_2306. I used the system backup
>> before the upgrade and then system import after the upgrade.
>>
>>  
>>
>> I had a 3 users in the system that where put in via LDAP. After the
>> upgrade…I am unable to end any information for those user. I had another
>> user login via LDAP (never had logged in before) and I am able to edit user
>> information with no troubles.
>>
>>  
>>
>> Any idea why this is happening?
>>
>>  
>>
>>  
>>
>> Thanks
>>
>> Heather 
>>
>>
>> ___
>> 
>>
>> Heather Bissell | *CMT* - Computer Management Technologies, Inc.|731
>> Gratiot Ave. • Saginaw , MI  48602
>>
>> ( 989.791.4860 ext. 131 |7 989.791.4928 |*  *hbiss...@cmtonline.com*
>>
>>  
>>
>> *An Employee Owned Company * *"Striving to Serve with Excellence"*
>>
>>  
>>
>> Disclaimer: This electronic mail transmission is privileged and
>> confidential and is intended only for the use by the party to whom it is
>> addressed. 
>>
>> If you have received this transmission in error, please disregard and
>> notify the sender.
>>
>>  
>>
>>
>>
>>
>> --
>> Sebastian Wagner
>> https://twitter.com/#!/dead_lock
>> http://www.openmeetings.de
>> http://www.webbase-design.de
>> http://www.wagner-sebastian.com
>> seba.wag...@gmail.com
>>
>
>
>
> --
> Sebastian Wagner
> https://twitter.com/#!/dead_lock
> http://www.openmeetings.de
> http://www.webbase-design.de
> http://www.wagner-sebastian.com
> seba.wag...@gmail.com
>



-- 
WBR
Maxim aka solomax

Re: Editing OpenMeetings with Eclipse

[Maxim Solodovnik]

Under Ubuntu 12.04
I use:
1) ant from apt-get (1.8.2 works as expected)
2) Eclipse EE + subclipse plugin
3) command line svn (apt-get subversion)
4) oracle jdk 1.6 (downloaded as .bin)

On Sun, May 6, 2012 at 2:55 PM, George Kirkham wrote:

> Thibault,
>
> Sadly I did not get far following the instructions at
>
> http://incubator.apache.org/openmeetings/BuildInstructions.html
>
> Step1 - Get required Software
>
>To develop OpenMeetings you need at least:
>
>Eclipse in a up to date copy and Sun JDK6  (used Deiban packages
> for Sun JDK and Eclipse)
>Apache ANT (minimum) 1.8.3  (installed)
>Subclipse 1.8 (Subversion 1.7 required!)
> http://subclipse.tigris.org/  (Subclipse would not install into Eclipse
> due to issues with dependices, which I was not able to successful install
> either)
>SVN Command line client (Subversion 1.7 required!)
> http://subversion.apache.org/packages.html
>Spring IDE for Eclipse (installable via Help > Eclipse Marketplace)
> (no such menu option existed, or could I find a market place)
>MySQL (or Postgres, or other Databases supported by Hibernate) are
> optionally but handy to have them
>
> Adding a new software site
> There are several different ways to add a software site to the list of
> sites that are used when browsing available software and checking for
> updates. You must know the Web Site location (URL) of the site that you
> want to add. To add the site, use one of the following procedures:
> *   Add a new site using the  Install/Update > Available Software
> Sites preference page.
> 1.  Click the Add... button.
> 2.  Type a name into the Name text box.
> 3.  If the software site is located on the web, type the Web Site
> location (URL) of the site into the Location text box. You may also paste
> or drag and drop a URL from a web browser into this text box.
> 4.  If the software site is in your local file system (including a
> CD), click Local... to specify the directory location of the site.
> 5.  If the software site is in your local file system but is packaged
> as a jar or zip file, click Archive... to specify the name of the file.
> *   Drag and drop the site URL from a browser into one of the
> following locations:
> 1.  The Work With combo box or the software list on the first page of
> the Install New Software wizard.
> 2.  The Available Software Sites preference page.
> 3.  The Location text field in the Add Site... dialog.
>
>
> https://hudson.eclipse.org/hudson/job/gef-nightly-tycho/lastSuccessfulBuild/artifact/update-site/
>
> http://download.eclipse.org/mylyn/releases/latest
>
> http://subclipse.tigris.org/update_1.8.x
>
> Classic way, Eclipse IDE, click "Help" -> "Install New Software...". Type "
> http://springide.org/updatesite"; to access the Spring IDE update site.
>
> Thanks,
>
> George Kirkham
>
>
>
> -Original Message-
> From: Thibault Le Meur [mailto:thibault.lem...@supelec.fr]
> Sent: Sunday, 6 May 2012 4:26 PM
> To: openmeetings-user@incubator.apache.org
> Subject: Re: Editing OpenMeetings with Eclipse
>
> It's been a long time since I've used eclipse on linux.
> However, I would recommend that you download eclipse instead of using the
> one provided by your OS, the same goes with the java jdk (use the one from
> sun), and ant (download it from apache). Everything can be put in /opt
>
> Then you can install the subclipse plugin from within eclipse gui, to get
> the svn features.
>
>
>
> - Message de gkirk...@co2crc.com.au -
> Date : Sun, 6 May 2012 15:11:30 +1000
>  De : George Kirkham  Répondre à :
> openmeetings-user@incubator.apache.org
>  Objet : Editing OpenMeetings with Eclipse
>   À : openmeetings-user@incubator.apache.org
>
>
> > I am using Debian for my OpenMeetings server,
> >
> >
> >
> > Could someone give me  a few hints on how to install Eclipse to edit
> > OpenMeetings.
> >
> >
> >
> > Using synaptic package manager, if I select the package "eclipse", it
> > will want to also install debian's ant but to be able to build
> > OpenMeeting I had to download and use Apache's ant.
> >
> >
> >
> > You are correct I am using "svn", does Eclipse integrate with svn and
> > can I set Eclipse to use my downloaded Apache's ant ?
> >
> >
> >
> > Thanks,
> >
> >
> >
> > George Kirkham
> >
> >
> >
> > IT Manager
> >
> > Cooperative Research Centre For Greenhouse Gas Technologies (CO2CRC)
> >
> > NFF House, 14 - 16 Brisbane Avenue, Barton, ACT, 2600, Australia
> >
> > T: (02) 6120 1600
> >
> > F: (02) 6273 7181
> >
> > E: gkirk...@co2crc.com.au,
> >
> > W: www.co2crc.com.au
> >
> >
> >
> >
> >
> > From: seba.wag...@gmail.com [mailto:seba.wag...@gmail.com]
> > Sent: Saturday, 5 May 2012 11:37 PM
> > To: openmeetings-user@incubator.apache.org
> > Subject: Re: When a user first joins an Meeting Room, they are
> > presented with two screens asking about Audio/Video hardware, can
> > these be combined into one screen.
> >
> >
> >
> >

Re: Editing OpenMeetings with Eclipse

[Maxim Solodovnik]

Hello George,

here is the link to the "4.2 beta" (I use it because it look better :) )
http://www.eclipse.org/downloads/packages/eclipse-ide-java-ee-developers/junom6


direct link to linux x64
http://www.eclipse.org/downloads/download.php?file=/technology/epp/downloads/release/juno/M6/eclipse-jee-juno-M6-linux-gtk-x86_64.tar.gz

I do extract it to the opt:
cd /opt
sudo tar -xzf  eclipse-jee-juno-M6-linux-gtk-x86_64.tar.gz

run eclipse
go to Help->Install new Software
enter  http://subclipse.tigris.org/update_1.8.x  and install everything :)
then set "java only" in Preferences->Team>SVN


On Thu, May 10, 2012 at 11:31 AM, George Kirkham wrote:

> Max,
>
> ** **
>
> I should have asked, how to you install “Eclipse EE + subclipse plugin” ?*
> ***
>
> ** **
>
> Thanks,
>
> ** **
>
> George Kirkham
>
> ** **
>
> IT Manager
>
> Cooperative Research Centre For Greenhouse Gas Technologies (CO2CRC) 
>
> NFF House, 14 - 16 Brisbane Avenue, Barton, ACT, 2600, Australia
>
> T: (02) 6120 1600
>
> F: (02) 6273 7181****
>
> E: gkirk...@co2crc.com.au, 
>
> W: www.co2crc.com.au
>
> ** **
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Thursday, 10 May 2012 1:59 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: Editing OpenMeetings with Eclipse
>
> ** **
>
> Under Ubuntu 12.04
>
> I use:
>
> 1) ant from apt-get (1.8.2 works as expected)
>
> 2) Eclipse EE + subclipse plugin
>
> 3) command line svn (apt-get subversion)
>
> 4) oracle jdk 1.6 (downloaded as .bin)
>
> On Sun, May 6, 2012 at 2:55 PM, George Kirkham 
> wrote:
>
> Thibault,
>
> Sadly I did not get far following the instructions at
>
> http://incubator.apache.org/openmeetings/BuildInstructions.html
>
> Step1 - Get required Software
>
>To develop OpenMeetings you need at least:
>
>Eclipse in a up to date copy and Sun JDK6  (used Deiban packages
> for Sun JDK and Eclipse)
>Apache ANT (minimum) 1.8.3  (installed)
>Subclipse 1.8 (Subversion 1.7 required!)
> http://subclipse.tigris.org/  (Subclipse would not install into Eclipse
> due to issues with dependices, which I was not able to successful install
> either)
>SVN Command line client (Subversion 1.7 required!)
> http://subversion.apache.org/packages.html
>Spring IDE for Eclipse (installable via Help > Eclipse Marketplace)
> (no such menu option existed, or could I find a market place)
>MySQL (or Postgres, or other Databases supported by Hibernate) are
> optionally but handy to have them
>
> Adding a new software site
> There are several different ways to add a software site to the list of
> sites that are used when browsing available software and checking for
> updates. You must know the Web Site location (URL) of the site that you
> want to add. To add the site, use one of the following procedures:
> *   Add a new site using the  Install/Update > Available Software
> Sites preference page.
> 1.  Click the Add... button.
> 2.  Type a name into the Name text box.
> 3.  If the software site is located on the web, type the Web Site
> location (URL) of the site into the Location text box. You may also paste
> or drag and drop a URL from a web browser into this text box.
> 4.  If the software site is in your local file system (including a
> CD), click Local... to specify the directory location of the site.
> 5.  If the software site is in your local file system but is packaged
> as a jar or zip file, click Archive... to specify the name of the file.
> *   Drag and drop the site URL from a browser into one of the
> following locations:
> 1.  The Work With combo box or the software list on the first page of
> the Install New Software wizard.
> 2.  The Available Software Sites preference page.
> 3.  The Location text field in the Add Site... dialog.
>
>
> https://hudson.eclipse.org/hudson/job/gef-nightly-tycho/lastSuccessfulBuild/artifact/update-site/
>
> http://download.eclipse.org/mylyn/releases/latest
>
> http://subclipse.tigris.org/update_1.8.x
>
> Classic way, Eclipse IDE, click "Help" -> "Install New Software...". Type "
> http://springide.org/updatesite"; to access the Spring IDE update site.
>
> Thanks,
>
> George Kirkham
>
>
>
>
> -Original Message-
> From: Thibault Le Meur [mailto:thibault.lem...@supelec.fr]
>
> Sent: Sunday, 6 May 2012 4:26 PM
> To: openmeetings-user@incubator.apache.org
>
> Subject: Re: Editing OpenMeetings with Eclipse
>
&

Screen publishing capability

[Maxim Solodovnik]

Hello Sebastian, All,

I just implement "proof of concept" publishing Om screen sharing to the
"flash stream re-translator" (like justin.tv)
What do you think is it useful/demanded feature for OM?

I can "polish" it and commit to the trunk
1) right now
2) after release
3) never

looking forward for your answers :)

-- 
WBR
Maxim aka solomax

Re: Editing OpenMeetings with Eclipse

[Maxim Solodovnik]

I mean this setting:
Under Window->Preference->Team->SVN there is a “SVN interface”, “Client:”
which I have now set to “SVNKit (Pure Java) SVNKit v1.7.0 SNAPSHOT”

to resolve
 I get “Error (100 of 125 items), mostly because “Project ‘Openmeetings’ is
missing required library: ‘build/lib/…”  where … is a listing of about 100
*.jar files.
you need to run
ant -Ddb=mysql prepare-eclipse
(if your DB==mysql)


On Thu, May 10, 2012 at 1:33 PM, George Kirkham wrote:

> Hi Max,
>
> ** **
>
> I was not able to install “Subversion Revision Graph”, “Subclipse
> Integration for Mylyn 3.x (Optional)”, but I did install the other items.*
> ***
>
> ** **
>
> You said “set "java only" in Preferences->Team>SVN”, but I cannot find
> such a selection?
>
> ** **
>
> Under Window->Preference->Team  there is  a “Perspective:” set to “Team
> Synchronizing” while there is also a “Java” option, but I don’t think this
> is what you mean.
>
> ** **
>
> Under Window->Preference->Team->SVN there is a “SVN interface”, “Client:”
> which I have now set to “SVNKit (Pure Java) SVNKit v1.7.0 SNAPSHOT”, it was
> JavaLH (JNI) Not Available”.
>
> ** **
>
> I then ran “File”, “Import”, selected “SVN”, “Checkout Projects from SVN”,
> Next
>
> Entered
> https://svn.apache.org/repos/asf/incubator/openmeetings/trunk/singlewebapp/
> 
>
> Followed the prompts and selected “Finish”.
>
> ** **
>
> But now I get “Error (100 of 125 items), mostly because “Project
> ‘Openmeetings’ is missing required library: ‘build/lib/…”  where … is a
> listing of about 100 *.jar files.  However I am looking around in the
> Openmeetings code and searching for objects, methods, etc.
>
> ** **
>
> What I current want to achieve is to learn what code is required to let
> the Whiteboard’s zoom feature be available to meeting participants who have
> not been given any privileges (e.g. “Draw on Whiteboard privileges” ), and
> while I don’t quite know what I am doing in Eclipse, I think that for a
> start I want to find the code which is in “WhiteboardObject.java” line 83
> “public void setZoom(Integer zoom) {“  
>
> ** **
>
> WhiteboardManagement.java, line 289 “whiteBoardObject.setZoom((Integer)
> actionObject.get(2));
>
> ** **
>
> UpdateWhiteboardObject
>
> ** **
>
> Err, well I think I am somewhat off track.  Eclipse is great, but I have a
> lot of learning in Eclipse, Java and Openmeetings before I can be of much
> use with the code.
>
> ** **
>
> ** **
>
> Thanks,
>
> ** **
>
> George Kirkham
>
> ** **
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Thursday, 10 May 2012 2:41 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: Editing OpenMeetings with Eclipse
>
> ** **
>
> Hello George,
>
> ** **
>
> here is the link to the "4.2 beta" (I use it because it look better :) )**
> **
>
>
> http://www.eclipse.org/downloads/packages/eclipse-ide-java-ee-developers/junom6
>  
>
> ** **
>
> direct link to linux x64
> http://www.eclipse.org/downloads/download.php?file=/technology/epp/downloads/release/juno/M6/eclipse-jee-juno-M6-linux-gtk-x86_64.tar.gz
> 
>
> ** **
>
> I do extract it to the opt:
>
> cd /opt
>
> sudo tar -xzf  eclipse-jee-juno-M6-linux-gtk-x86_64.tar.gz
>
> run eclipse
>
> go to Help->Install new Software
>
> enter  http://subclipse.tigris.org/update_1.8.x  and install everything :)
> 
>
> then set "java only" in Preferences->Team>SVN
>
> 
>
> On Thu, May 10, 2012 at 11:31 AM, George Kirkham 
> wrote:
>
> Max,
>
>  
>
> I should have asked, how to you install “Eclipse EE + subclipse plugin” ?*
> ***
>
>  
>
> Thanks,
>
>  
>
> George Kirkham
>
>  
>
> IT Manager
>
> Cooperative Research Centre For Greenhouse Gas Technologies (CO2CRC) 
>
> NFF House, 14 - 16 Brisbane Avenue, Barton, ACT, 2600, Australia
>
> T: (02) 6120 1600
>
> F: (02) 6273 7181
>
> E: gkirk...@co2crc.com.au, 
>
> W: www.co2crc.com.au
>
>  
>
>  
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Thursday, 10 May 2012 1:59 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: Editing OpenMeetings with Eclipse
>
>  
>
> Under Ubuntu 12.04
>
> I use:
>
> 1) ant from apt-get (1.8.2 works as expected)
>
> 2) Eclipse EE + subclipse plugin*

Re: Screen publishing capability

[Maxim Solodovnik]

Hello Alexey,

It is not separate application: ScopeApplicationAdapter.java is modified to
create StreamingProxy (currently I'm working on ScreenSharing applet to
replace hard-coded proxy parameters with configurable ones)



On Thu, May 10, 2012 at 3:23 PM, Alexei Fedotov wrote:

> Does the code affect release in any way? If this is independent code
> (like separate application), I believe it can be added. If not, we
> have to discuss if it affects other functionality.
>
> --
> With best regards / с наилучшими пожеланиями,
> Alexei Fedotov / Алексей Федотов,
> http://dataved.ru/
> +7 916 562 8095
>
>
> On Thu, May 10, 2012 at 9:33 AM, Maxim Solodovnik 
> wrote:
> > Hello Sebastian, All,
> >
> > I just implement "proof of concept" publishing Om screen sharing to the
> > "flash stream re-translator" (like justin.tv)
> > What do you think is it useful/demanded feature for OM?
> >
> > I can "polish" it and commit to the trunk
> > 1) right now
> > 2) after release
> > 3) never
> >
> > looking forward for your answers :)
> >
> > --
> > WBR
> > Maxim aka solomax
>



-- 
WBR
Maxim aka solomax

Re: System Import HTTP-ERROR:500 - Could not find key in configuration CONF_KEY: DEFAULT_MAX_UPLOAD_SIZE

[Maxim Solodovnik]

Hello George,

the configuration should be "max_upload_size"
I'll double check.

On Tue, May 15, 2012 at 1:16 PM, George Kirkham wrote:

> Sebastian,
>
> ** **
>
> There might be a bug.  When I had more time to check the log files I found
> the message “Could not find key in configuration CONF_KEY:
> DEFAULT_MAX_UPLOAD_SIZE”, however in my configuration table there is a
> setting for “max_upload_size”, but not for “DEFAULT_MAX_UPLOAD_SIZE”
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> DEBUG 05-13 16:44:17.943 AppointmentLogic.java 2717993 408
> org.openmeetings.app.data.calendar.management.AppointmentLogic
> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-8] -
> doScheduledMeetingReminder : no Appointments in range
>
> DEBUG 05-13 16:45:49.330 HandlerMethodInvoker.java 2809380 173
> org.springframework.web.bind.annotation.support.HandlerMethodInvoker
> [http-0.0.0.0-5080-5] - Invoking request handler method: public void
> org.openmeetings.servlet.outputhandler.BackupImportController.service(javax.servlet.http.HttpServletRequest,javax.servlet.http.HttpServletResponse)
> throws javax.servlet.ServletException,java.io.IOException
>
> DEBUG 05-13 16:45:49.331 AbstractUploadController.java 2809381 47
> org.openmeetings.servlet.outputhandler.AbstractUploadController
> [http-0.0.0.0-5080-5] - Starting validate
>
> DEBUG 05-13 16:45:49.331 AbstractUploadController.java 2809381 54
> org.openmeetings.servlet.outputhandler.AbstractUploadController
> [http-0.0.0.0-5080-5] - sid: 30662dc60090358d260c872daac42089
>
> DEBUG 05-13 16:45:49.338 AbstractUploadController.java 2809388 58
> org.openmeetings.servlet.outputhandler.AbstractUploadController
> [http-0.0.0.0-5080-5] - userId = 1, userLevel = 3
>
> DEBUG 05-13 16:45:49.339 AbstractUploadController.java 2809389 72
> org.openmeetings.servlet.outputhandler.AbstractUploadController
> [http-0.0.0.0-5080-5] - publicSID: bde999bf315d82237e40fac9f4b7291a
>
> WARN 05-13 16:45:49.340 Configurationmanagement.java 2809390 103
> org.openmeetings.app.data.basic.Configurationmanagement
> [http-0.0.0.0-5080-5] - Could not find key in configuration CONF_KEY:
> DEFAULT_MAX_UPLOAD_SIZE
>
> DEBUG 05-13 16:45:49.340 AbstractUploadController.java 2809390 81
> org.openmeetings.servlet.outputhandler.AbstractUploadController
> [http-0.0.0.0-5080-5] - uploading 1273848358 bytes
>
> DEBUG 05-13 16:45:57.941 MeetingReminderJob.java 2817991 34
> org.openmeetings.app.quartz.scheduler.MeetingReminderJob
> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-9] -
> MeetingReminderJob.execute
>
> DEBUG 05-13 16:45:57.943 AppointmentDaoImpl.java 2817993 937
> org.openmeetings.app.data.calendar.daos.AppointmentDaoImpl
> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-9] -
> startStamp 2012-05-13 16:45:57.943
>
> DEBUG 05-13 16:45:57.948 AppointmentDaoImpl.java 2817998 938
> org.openmeetings.app.data.calendar.daos.AppointmentDaoImpl
> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-9] -
> stopStamp 2012-05-13 17:00:57.943
>
> DEBUG 05-13 16:45:57.950 AppointmentLogic.java 2818000 408
> org.openmeetings.app.data.calendar.management.AppointmentLogic
> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-9] -
> doScheduledMeetingReminder : no Appointments in range
>
> DEBUG 05-13 16:47:37.941 MeetingReminderJob.java 2917991 34
> org.openmeetings.app.quartz.scheduler.MeetingReminderJob
> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-10] -
> MeetingReminderJob.execute
>
> DEBUG 05-13 16:47:37.943 AppointmentDaoImpl.java 2917993 937
> org.openmeetings.app.data.calendar.daos.AppointmentDaoImpl
> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-10] -
> startStamp 2012-05-13 16:47:37.943
>
> DEBUG 05-13 16:47:37.943 AppointmentDaoImpl.java 2917993 938
> org.openmeetings.app.data.calendar.daos.AppointmentDaoImpl
> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-10] -
> stopStamp 2012-05-13 17:02:37.943
>
> ** **
>
> ** **
>
> Thanks,
>
> ** **
>
> George Kirkham
>
> ** **
>
> ** **
>
> *From:* seba.wag...@gmail.com 
> [mailto:seba.wag...@gmail.com]
>
> *Sent:* Monday, 14 May 2012 10:29 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: System Import HTTP-ERROR:500
>
> ** **
>
> That is no really issue then :)
> You just need to goto the Administration > Configuration and adjust a
> higher value for the max_upload_size variable.
>
> Sebastian
>
> 2012/5/14 George Kirkham 
>
> Sebastian,
>
>  
>
> 1)  Tomorrow when I have more time I will see if I can capture the
> error logs. Below is what I found from today’s log file.
>
>  
>
> 2012-05-13 16:45:49,461 [http-0.0.0.0-5080-5] ERROR
> o.a.c.c.C.[.[.0.0.0.[.[spring-mvc] - Servlet.service() for servlet
> spring-mvc threw exception
>
> javax.servlet.ServletException: Maximum uplo

Re: System Import HTTP-ERROR:500 - Could not find key in configuration CONF_KEY: DEFAULT_MAX_UPLOAD_SIZE

[Maxim Solodovnik]

Corrected rev. 1338553

On Tue, May 15, 2012 at 1:25 PM, Maxim Solodovnik wrote:

> Hello George,
>
> the configuration should be "max_upload_size"
> I'll double check.
>
>
> On Tue, May 15, 2012 at 1:16 PM, George Kirkham wrote:
>
>> Sebastian,
>>
>> ** **
>>
>> There might be a bug.  When I had more time to check the log files I
>> found the message “Could not find key in configuration CONF_KEY:
>> DEFAULT_MAX_UPLOAD_SIZE”, however in my configuration table there is a
>> setting for “max_upload_size”, but not for “DEFAULT_MAX_UPLOAD_SIZE”
>>
>> ** **
>>
>> ** **
>>
>> ** **
>>
>> ** **
>>
>> ** **
>>
>> DEBUG 05-13 16:44:17.943 AppointmentLogic.java 2717993 408
>> org.openmeetings.app.data.calendar.management.AppointmentLogic
>> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-8] -
>> doScheduledMeetingReminder : no Appointments in range
>>
>> DEBUG 05-13 16:45:49.330 HandlerMethodInvoker.java 2809380 173
>> org.springframework.web.bind.annotation.support.HandlerMethodInvoker
>> [http-0.0.0.0-5080-5] - Invoking request handler method: public void
>> org.openmeetings.servlet.outputhandler.BackupImportController.service(javax.servlet.http.HttpServletRequest,javax.servlet.http.HttpServletResponse)
>> throws javax.servlet.ServletException,java.io.IOException
>>
>> DEBUG 05-13 16:45:49.331 AbstractUploadController.java 2809381 47
>> org.openmeetings.servlet.outputhandler.AbstractUploadController
>> [http-0.0.0.0-5080-5] - Starting validate
>>
>> DEBUG 05-13 16:45:49.331 AbstractUploadController.java 2809381 54
>> org.openmeetings.servlet.outputhandler.AbstractUploadController
>> [http-0.0.0.0-5080-5] - sid: 30662dc60090358d260c872daac42089
>>
>> DEBUG 05-13 16:45:49.338 AbstractUploadController.java 2809388 58
>> org.openmeetings.servlet.outputhandler.AbstractUploadController
>> [http-0.0.0.0-5080-5] - userId = 1, userLevel = 3
>>
>> DEBUG 05-13 16:45:49.339 AbstractUploadController.java 2809389 72
>> org.openmeetings.servlet.outputhandler.AbstractUploadController
>> [http-0.0.0.0-5080-5] - publicSID: bde999bf315d82237e40fac9f4b7291a
>>
>> WARN 05-13 16:45:49.340 Configurationmanagement.java 2809390 103
>> org.openmeetings.app.data.basic.Configurationmanagement
>> [http-0.0.0.0-5080-5] - Could not find key in configuration CONF_KEY:
>> DEFAULT_MAX_UPLOAD_SIZE
>>
>> DEBUG 05-13 16:45:49.340 AbstractUploadController.java 2809390 81
>> org.openmeetings.servlet.outputhandler.AbstractUploadController
>> [http-0.0.0.0-5080-5] - uploading 1273848358 bytes
>>
>> DEBUG 05-13 16:45:57.941 MeetingReminderJob.java 2817991 34
>> org.openmeetings.app.quartz.scheduler.MeetingReminderJob
>> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-9] -
>> MeetingReminderJob.execute
>>
>> DEBUG 05-13 16:45:57.943 AppointmentDaoImpl.java 2817993 937
>> org.openmeetings.app.data.calendar.daos.AppointmentDaoImpl
>> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-9] -
>> startStamp 2012-05-13 16:45:57.943
>>
>> DEBUG 05-13 16:45:57.948 AppointmentDaoImpl.java 2817998 938
>> org.openmeetings.app.data.calendar.daos.AppointmentDaoImpl
>> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-9] -
>> stopStamp 2012-05-13 17:00:57.943
>>
>> DEBUG 05-13 16:45:57.950 AppointmentLogic.java 2818000 408
>> org.openmeetings.app.data.calendar.management.AppointmentLogic
>> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-9] -
>> doScheduledMeetingReminder : no Appointments in range
>>
>> DEBUG 05-13 16:47:37.941 MeetingReminderJob.java 2917991 34
>> org.openmeetings.app.quartz.scheduler.MeetingReminderJob
>> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-10] -
>> MeetingReminderJob.execute
>>
>> DEBUG 05-13 16:47:37.943 AppointmentDaoImpl.java 2917993 937
>> org.openmeetings.app.data.calendar.daos.AppointmentDaoImpl
>> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-10] -
>> startStamp 2012-05-13 16:47:37.943
>>
>> DEBUG 05-13 16:47:37.943 AppointmentDaoImpl.java 2917993 938
>> org.openmeetings.app.data.calendar.daos.AppointmentDaoImpl
>> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-10] -
>> stopStamp 2012-05-13 17:02:37.943
>>
>> ** **
>>
>> ** **
>>
>> Thanks,
>>
>> ** **
>>
>> George Kirkham*

Re: Step by Step build instructions

[Maxim Solodovnik]

Try 7-zip ( http://www.7-zip.org/ )

On Wed, May 16, 2012 at 6:08 AM, George Kirkham wrote:

> Stephen,
>
> ** **
>
> Is there a good freeware “unrar” program that I can use to open the
> archive with ?
>
> ** **
>
> Thanks,
>
> ** **
>
> George Kirkham
>
> ** **
>
> ** **
>
> ** **
>
> *From:* Stephen Cottham [mailto:stephen.cott...@robertbird.com.au]
> *Sent:* Tuesday, 15 May 2012 10:47 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Step by Step build instructions
>
> ** **
>
> Hi All,
>
> ** **
>
> Please find attached a compressed PDF that has a step by step guide
> showing the following:
>
> ** **
>
> **1)  **Installing Debian 64 Base System
>
> **2)  **Installing all required Dependencies
>
> **3)  **Compiling latest OM 2.x
>
> **4)  **Installing the Built OM 2.x
>
> **5)  **Configuring basic paths
>
> **6)  **Installing SSL Certificates – both generated and wild card
>
> **7)  **Install and setup of Apache for use as a reverse proxy and
> re-write for both HTTP and HTTPS
>
> ** **
>
> Hopefully some new users may find it helpful.
>
> ** **
>
> Best Regards
>
> ** **
>
> ** **
>
> *Stephen Cottham**
> *Group IT Manager (Associate)
>
> Robert Bird Group
> Level 5, 333 Ann St
> Brisbane, Queensland, 4000, Australia
>
> *Phone: +6173 319 2777 (AUS)*
>
> *Phone: +44207 592 8000 (UK)*
>
> *Fax: +6173 319 2799*
>
>  
>
> *Mobile:  +61400 756 963 (AUS)*
>
> *Mobile:  +447900 918 616 (UK)*
>
> *Web: **www.robertbird.com* 
>
> 
>
> This email and any attachments are confidential and may contain legally
> privileged information or copyright material. Unless expressly stated,
> confidentiality and/or legal privilege is not intended to be waived by the
> sending of this email. The contents of this email, including any
> attachments, are intended solely for the use of the individual or entity to
> whom they are addressed. If you are not an intended recipient, please
> contact us immediately by return email and then delete both messages. You
> may not otherwise read, forward, copy, use or disclose this email or any
> attachments. Any views expressed in this email are those of the individual
> sender except where the sender expressly, and with authority, states
> otherwise. It is your responsibility to check any attachments for viruses
> or defects before opening or sending them on. None of the sender or its
> related entities accepts any liability for any consequential damage
> resulting from this email containing computer viruses. 
>
> 
>
>
> Disclaimer added by *CodeTwo Exchange Rules*
> www.codetwo.com
>
> ** **
>



-- 
WBR
Maxim aka solomax
<><>

Fwd: RTMPS question

[Maxim Solodovnik]

Dear All,

Is there anybody was able to set up RTMPS with self-signed certificate?
Or maybe have clue for the issue described below?

Thanks in advance :)


-- Forwarded message --
From: seba.wag...@gmail.com 
Date: Wed, May 16, 2012 at 3:09 PM
Subject: Re: RTMPS question
To: Maxim Solodovnik 
Cc: openmeetings-...@incubator.apache.org


I have no SSL test environment currently. I did not run into this issue.

I did only find the corresponding code that throws your issue in the red5
sources:
http://code.google.com/p/red5/source/browse/java/server/trunk/src/org/red5/server/net/rtmp/codec/RTMPProtocolDecoder.java#212

However there is no advice in the source how to resolve it.

Maybe some other users have an idea that successfully run OpenMeetings via
SSL, for example the people asking for the RTMPSClient feature in the
Screensharing.

Sebastian


2012/5/16 Maxim Solodovnik 

> Hello Sebastian,
>
> I'm currently trying to setup and test RTMPS for Screen sharing.
>
> I perform all steps from instruction
> But still unable to get RTMPS working
>  Here is extended log:
>
> [DEBUG] [NioProcessor-18] org.apache.mina.filter.ssl.SslHandler - Session
> Server[1](ssl...) processing the FINISHED state
> [DEBUG] [NioProcessor-18] org.apache.mina.filter.ssl.SslHandler - Session
> Server[1*](SSL) is now secured*
> [DEBUG] [NioProcessor-18] org.apache.mina.filter.ssl.SslHandler - Session
> Server[1](SSL) processing the FINISHED state
> [DEBUG] [NioProcessor-18] org.apache.mina.filter.ssl.SslHandler - Session
> Server[1]*(SSL) is now secured*
> [DEBUG] [NioProcessor-18] org.apache.mina.filter.ssl.SslFilter - Session
> Server[1](SSL): Processing the SSL Data
> [DEBUG] [NioProcessor-18] org.apache.mina.filter.ssl.SslFilter - Session
> Server[1](SSL): Message received : HeapBuffer[pos=0 lim=213 cap=1024: 17 03
> 01 00 D0 67 A1 06 4E 8C EB EB 42 D8 D7 A2...]
> [DEBUG] [NioProcessor-18] org.apache.mina.filter.ssl.SslHandler - Session
> Server[1](SSL) Processing the received message
> [DEBUG] [NioProcessor-18] org.apache.mina.filter.ssl.SslFilter - Session
> Server[1](SSL): Processing the SSL Data
> [DEBUG] [NioProcessor-18] org.apache.mina.filter.codec.ProtocolCodecFilter
> - Processing a MESSAGE_RECEIVED for session 1
> [DEBUG] [NioProcessor-18]
> org.red5.server.net.rtmp.codec.RTMPProtocolDecoder - Start: 0
> [DEBUG] [NioProcessor-18]
> org.red5.server.net.rtmp.codec.RTMPProtocolDecoder - decodeHandshake -
> rtmp: RTMP [state=connect, client-mode=false, debug=false, encrypted=false,
> lastReadChannel=0, lastWriteChannel=0, readHeaders={}, writeHeaders={},
> readPacketHeaders={}, readPackets={}, writePackets={}, writeTimestamps={},
> liveTimestamps={}, readChunkSize=128, writeChunkSize=128, encoding=AMF0]
> buffer: HeapBuffer[pos=0 lim=183 cap=1536: 50 4F 53 54 20 2F 6F 70 65 6E 2F
> 31 20 48 54 54...]
> [DEBUG] [NioProcessor-18]
> org.red5.server.net.rtmp.codec.RTMPProtocolDecoder - *Handshake init too
> small, buffering. remaining: 183*
> [WARN] [Red5_Scheduler_Worker-2] org.red5.server.net.rtmp.RTMPConnection -
> *Closing RTMPMinaConnection from 192.168.72.100 : 64634 to null (in: 931
> out 3083 ), with id 1 due to long handshake*
>
>
> As you can see SSL is secured (no issues)
> but then I got:
> "Handshake init too small, buffering. remaining: 183"
> and
> "Closing RTMPMinaConnection from 192.168.72.100 : 64634 to null (in: 931
> out 3083 ), with id 1 due to long handshake"
>
>
>
> I'm using self-signed certificate with fake CA (added both to the server
> and client)
>
> client debug is:
> "devRtmpConnection/registerMethods()
> error  NetConnection.Connect.Failed rtmps://
> 192.168.72.105:5443/openmeetings/hibernate null false "
>
>
> Can you help me with it?
>
> --
> WBR
> Maxim aka solomax
>



-- 
Sebastian Wagner
https://twitter.com/#!/dead_lock
http://www.openmeetings.de
http://www.webbase-design.de
http://www.wagner-sebastian.com
seba.wag...@gmail.com



-- 
WBR
Maxim aka solomax

Re: ISO LIVE DVD OpenMeetings 2.0 on Ubuntu 12.04 to download

[Maxim Solodovnik]

On Ubuntu (since 11.10) everything except for jod and JDK are works as
expected from PPA.

On Wed, May 16, 2012 at 4:23 PM, George Kirkham wrote:

> Brian,
>
> ** **
>
> A PPA would not be my first choice.
>
> ** **
>
> OpenMeetings makes use of the latest versions of a number of supporting
> packages. Would this not be difficult under a PPA system?
>
> ** **
>
> Thanks,
>
> ** **
>
> George Kirkham
>
> 
>
> A *Personal Package Archive (PPA)* is a special software 
> repositoryfor uploading 
> source
> packages to be 
> built and published as an APT
> repository  by
> Launchpad  or a similar
> application.[1]The
>  term is currently
> [*when?
> *] used for 
> Ubuntupackages, but 
> targets "Everyone" according to Launchpad host, Canonical
> Ltd 
>
> ** **
>
> *From:* brian mullan [mailto:bmullan.m...@gmail.com]
> *Sent:* Wednesday, 16 May 2012 7:05 PM
> *To:* zurca...@gmail.com; openmeetings-user@incubator.apache.org
> *Subject:* Fwd: ISO LIVE DVD OpenMeetings 2.0 on Ubuntu 12.04 to download*
> ***
>
> ** **
>
> Although the ISO is useful would it be possible for someone to create an
> ubuntu/debian PPA
> that could install OpenMeetings onto an existing Ubuntu or Debian Server
> OS?
>
> That flexibility would be great and then the OpenMeetings could could be
> found & installed using
> commong SW installation tools such as Synaptic, aptitude, or in Ubuntu's
> case the new Software Center?
>
> Brian
>
> -- Forwarded message --
> From: *greenes* 
> Date: Wed, May 16, 2012 at 6:47 AM
> Subject: Re: ISO LIVE DVD OpenMeetings 2.0 on Ubuntu 12.04 to download
> To: openmeetings-user@incubator.apache.org
>
>
> Hi Hasan,
>
> Would build the new iso you propose
> when OpenMeetings 2.0 be finished stable.
>
> Regards!
>
> 
>
> El mié, 16-05-2012 a las 09:17 +0430, Hasan Gharehasanloo escribió:
> > Hi
> >
> > In my opinion it would be a good idea to install moodle and moodle
> > integration in this ISO installtion.
> >
> > Best Regards
> > Hasan Gharehasanloo
> >
> > On Sun, May 13, 2012 at 1:55 PM, greenes  wrote:
> >
> > Hi George,
> >
> > In my case this happens when get out
> > of Conference Room the first time only,
> > the following times not appears,
> > anyway moving the mouse over disappears,
> > without clic.
> > So i think the code is right.
> >
> > The OpenMeetings version i have used
> > to build the iso is:
> >
> > OpenMeetings 2.0 date build 1-5-2012.
> >
> > Regards
> >
> > ...
> >
> >
> > El dom, 13-05-2012 a las 13:59 +1000, George Kirkham escribió:
> >
> > > Hi,
> > >
> > >
> > >
> > > Does anyone else get a "tools tip" still floating on the
> > screen when
> > > they log out of OpenMeetings?
> > >
> > >
> > >
> > > I can clear this by clicking on the floating tool tip, but
> > it just
> > > does not look great and give you the feeling that the code
> > may
> > > unstable.
> > >
> > >
> > >
> > > I have the habit of logging out and not just closing the
> > browser
> > > window when I have been in a meeting, and when I do there is
> > a random
> > > tool tip left on the screen. Please see the attached images
> > below. It
> > > can be one of a number of tool tips, I guess the last one
> > that was
> > > displayed when you exit a room?
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> > --
> > -
> > Best Regards
> > Hassan Gharehasanloo
>
> 
>
> ** **
>



-- 
WBR
Maxim aka solomax

Re: RTMPS question

[Maxim Solodovnik]

what browser are you using?

On Wed, May 16, 2012 at 5:30 PM, Stephen Cottham <
stephen.cott...@robertbird.com.au> wrote:

> Hey Maxim,
>
> ** **
>
> I got that to work now, I added the Certificate into my trusted Root
> folder via the browser and it will now connect, so anyone using a
> self-signed cert will need to add this to all machines they plan on running
> it with otherwise RMTPS will fail.
>
> ** **
>
> Cheers
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> *From:* Stephen Cottham [mailto:stephen.cott...@robertbird.com.au]
> *Sent:* Wednesday, 16 May 2012 11:26 AM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* RE: RTMPS question
>
> ** **
>
> Hey Maxim,
>
> ** **
>
> I’ve created the self-signed certificate, this is working fine in apache
> and the install process (HTTPS) but fails on RTMPS only.
>
> ** **
>
> All I get from my logs is the following:
>
> ** **
>
> [WARN] [NioProcessor-19] org.red5.server.net.rtmps.RTMPSMinaIoHandler -
> Exception caught Connection reset by peer
>
> [WARN] [NioProcessor-19] org.red5.server.net.rtmps.RTMPSMinaIoHandler -
> Exception caught Broken pipe
>
> [WARN] [NioProcessor-19] org.red5.server.net.rtmps.RTMPSMinaIoHandler -
> Exception caught null
>
> ** **
>
> And 
>
> ** **
>
> [WARN] [Red5_Scheduler_Worker-4] org.red5.server.net.rtmp.RTMPConnection -
> Closing RTMPMinaConnection from 10.17.23.28 : 51487 to null (in: 319 out
> 639 ), with id 3 due to long handshake
>
> ** **
>
> Just to check I put the authorised cert back in and it connects fine, I’ll
> keep on trying to see what’s going wrong, not much from the logs etc..
> unfortunately.
>
> ** **
>
> ** **
>
> Cheers
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Wednesday, 16 May 2012 9:38 AM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: RTMPS question
>
> ** **
>
> Thanks Stephen,
>
> ** **
>
> I did use these steps to create certificates (the option with root
> certificate):
>
> http://www.tc.umn.edu/~brams006/selfsign.html
>
> http://www.tc.umn.edu/~brams006/selfsign_ubuntu.html
>
> ** **
>
> ** **
>
> and these 2 commands to convert server certificate to the keystore:
>
> ** **
>
> openssl pkcs12 -export -out certificate.pfx -inkey server.key -in
> server.crt -certfile ca.crt
>
> ** **
>
> keytool -importkeystore -deststorepass secret -destkeypass secret
> -destkeystore keystore -destalias red5 -srckeystore certificate.pfx
> -srcstoretype PKCS12 -srcstorepass password -srcalias 1
>
> ** **
>
> not sure if it helps, since it not completely working.
>
> ** **
>
> p.s. the certificate generated works well for Apache web server.
>
> ** **
>
> ** **
>
> On Wed, May 16, 2012 at 3:29 PM, Stephen Cottham <
> stephen.cott...@robertbird.com.au> wrote:
>
> Hi Maxim,
>
>  
>
> I have SSL running fine with a legit certificate, at some point today I
> can create a self-signed and test this for you.
>
>  
>
> Best Regards
>
>  
>
>  
>
>  
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Wednesday, 16 May 2012 9:24 AM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Fwd: RTMPS question
>
>  
>
> Dear All,
>
>  
>
> Is there anybody was able to set up RTMPS with self-signed certificate?***
> *
>
> Or maybe have clue for the issue described below?
>
> Thanks in advance :)
>
> -- Forwarded message --
> From: *seba.wag...@gmail.com* 
> Date: Wed, May 16, 2012 at 3:09 PM
> Subject: Re: RTMPS question
> To: Maxim Solodovnik 
> Cc: openmeetings-...@incubator.apache.org
>
>
> I have no SSL test environment currently. I did not run into this issue.
>
> I did only find the corresponding code that throws your issue in the red5
> sources:
>
> http://code.google.com/p/red5/source/browse/java/server/trunk/src/org/red5/server/net/rtmp/codec/RTMPProtocolDecoder.java#212
>
> However there is no advice in the source how to resolve it.
>
> Maybe some other users have an idea that successfully run OpenMeetings via
> SSL, for example the people asking for the RTMPSClient feature in the
> Screensharing.
>
> Sebastian
>
>  
>
> 2012/5/16 Maxim Solodovnik 
>
> Hello Sebastian,
>
>  ***

RE: RTMPS question

[Maxim Solodovnik]

Can you check if it works in Chrome?
It seems I was fighting Chrome only.
Will check FF later today
On May 16, 2012 5:39 PM, "Stephen Cottham" <
stephen.cott...@robertbird.com.au> wrote:

> I installed it via IE but you can open MMC and then load the certificates
> module and import it that way, after importing via IE it can now use
> firefox too.
>
> ** **
>
> I’m just knocking up the steps I took to get it to work and will mail it
> back, give us like 10 mins.****
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Wednesday, 16 May 2012 11:34 AM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: RTMPS question
>
> ** **
>
> what browser are you using?
>
> On Wed, May 16, 2012 at 5:30 PM, Stephen Cottham <
> stephen.cott...@robertbird.com.au> wrote:
>
> Hey Maxim,
>
>  
>
> I got that to work now, I added the Certificate into my trusted Root
> folder via the browser and it will now connect, so anyone using a
> self-signed cert will need to add this to all machines they plan on running
> it with otherwise RMTPS will fail.
>
>  
>
> Cheers
>
>  
>
>  
>
>  
>
>  
>
>  
>
> *From:* Stephen Cottham [mailto:stephen.cott...@robertbird.com.au]
> *Sent:* Wednesday, 16 May 2012 11:26 AM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* RE: RTMPS question
>
>  
>
> Hey Maxim,
>
>  
>
> I’ve created the self-signed certificate, this is working fine in apache
> and the install process (HTTPS) but fails on RTMPS only.
>
>  
>
> All I get from my logs is the following:
>
>  
>
> [WARN] [NioProcessor-19] org.red5.server.net.rtmps.RTMPSMinaIoHandler -
> Exception caught Connection reset by peer
>
> [WARN] [NioProcessor-19] org.red5.server.net.rtmps.RTMPSMinaIoHandler -
> Exception caught Broken pipe
>
> [WARN] [NioProcessor-19] org.red5.server.net.rtmps.RTMPSMinaIoHandler -
> Exception caught null
>
>  
>
> And 
>
>  
>
> [WARN] [Red5_Scheduler_Worker-4] org.red5.server.net.rtmp.RTMPConnection -
> Closing RTMPMinaConnection from 10.17.23.28 : 51487 to null (in: 319 out
> 639 ), with id 3 due to long handshake
>
>  
>
> Just to check I put the authorised cert back in and it connects fine, I’ll
> keep on trying to see what’s going wrong, not much from the logs etc..
> unfortunately.
>
>  
>
>  
>
> Cheers
>
>  
>
>  
>
>  
>
>  
>
>  
>
>  
>
>  
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Wednesday, 16 May 2012 9:38 AM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: RTMPS question
>
>  
>
> Thanks Stephen,
>
>  
>
> I did use these steps to create certificates (the option with root
> certificate):
>
> http://www.tc.umn.edu/~brams006/selfsign.html
>
> http://www.tc.umn.edu/~brams006/selfsign_ubuntu.html
>
>  
>
>  
>
> and these 2 commands to convert server certificate to the keystore:
>
>  
>
> openssl pkcs12 -export -out certificate.pfx -inkey server.key -in
> server.crt -certfile ca.crt
>
>  
>
> keytool -importkeystore -deststorepass secret -destkeypass secret
> -destkeystore keystore -destalias red5 -srckeystore certificate.pfx
> -srcstoretype PKCS12 -srcstorepass password -srcalias 1
>
>  
>
> not sure if it helps, since it not completely working.
>
>  
>
> p.s. the certificate generated works well for Apache web server.
>
>  
>
>  
>
> On Wed, May 16, 2012 at 3:29 PM, Stephen Cottham <
> stephen.cott...@robertbird.com.au> wrote:
>
> Hi Maxim,
>
>  
>
> I have SSL running fine with a legit certificate, at some point today I
> can create a self-signed and test this for you.
>
>  
>
> Best Regards
>
>  
>
>  
>
>  
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Wednesday, 16 May 2012 9:24 AM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Fwd: RTMPS question
>
>  
>
> Dear All,
>
>  
>
> Is there anybody was able to set up RTMPS with self-signed certificate?***
> *
>
> Or maybe have clue for the issue described below?
>
> Thanks in advance :)
>
> -- Forwarded message --
> From: *seba.wag...@gmail.com* 
> Date: Wed, May 16, 2012 at 3:09 PM
> Subject: Re

RTMPSClient questions

[Maxim Solodovnik]

Hello All,

I seems to finish implementing RTMPS screen sharing client.
To work it requires additional keystore "red5/conf/keystore.screen" with
the password specified in red5.properties: "rtmps.keystorepass"

Q1: how good to have same password for red5/conf/keystore
and red5/conf/keystore.screen? Should I add additional parameter to set up
separate password and customize keystore location?

The specified keystore/password are passed to the screensharing applet via
: keystore as base64 encoded binary, password in plaintext.

To avoid compromising "main" keystore I did the following:
1) create separate keystore (keystore.screen) with its own key
2) add key from 1 to "original" keystore

Q2: Is this OK? Maybe anybody can suggest better (more secure) way of
handling it? Probably without second certificate?

Thanks in advance

-- 
WBR
Maxim aka solomax

RE: RTMPSClient questions

[Maxim Solodovnik]

Since now MySQL JDBC driver is not included into bundle
You need to manually download it
Or while building from the sources run "ant -Ddb=mysql"
On May 18, 2012 6:20 PM, "Stephen Cottham" <
stephen.cott...@robertbird.com.au> wrote:

> Hey Maxim,
>
> ** **
>
> Im trying the latest build and getting the following error on start-up:***
> *
>
> ** **
>
> ERROR 05-18 12:17:43.467 ScopeApplicationAdapter.java 7790 174
> org.openmeetings.app.remote.red5.ScopeApplicationAdapter
> [Launcher:/openmeetings] - [appStart]
>
> org.springframework.transaction.CannotCreateTransactionException: Could
> not open JPA EntityManager for transaction; nested exception is
> 
> org.apache.openjpa.persistence.PersistenceException: Cannot load JDBC
> driver class 'com.mysql.jdbc.Driver'
>
> ** **
>
> Assuming issues talking with mysql, I can’t see any errors in the
> persistence.xml file, got any idea what’s wrong here? I’ve dropped the DB
> and recreated it, checked the UN and PW but same thing.
>
> ** **
>
> Cheers
>
> ** **
>
> ** **
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Friday, 18 May 2012 11:46 AM
> *To:* openmeetings-user@incubator.apache.org
> *Cc:* openmeetings-...@incubator.apache.org
> *Subject:* Re: RTMPSClient questions
>
> ** **
>
> Yes
>
> this line need to be deleted/commented
>
> On Fri, May 18, 2012 at 5:37 PM, Stephen Cottham <
> stephen.cott...@robertbird.com.au> wrote:****
>
> Hey Maxim,
>
>  
>
> Seems we still need to comment the JMX line for this to work with RTMPS,
> is that correct?
>
>  
>
>  
>
>  
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com] 
>
> *Sent:* Thursday, 17 May 2012 6:15 PM
>
> *To:* openmeetings-...@incubator.apache.org;
> openmeetings-user@incubator.apache.org
> *Subject:* RTMPSClient questions
>
>  
>
> Hello All,
>
>  
>
> I seems to finish implementing RTMPS screen sharing client.
>
> To work it requires additional keystore "red5/conf/keystore.screen" with
> the password specified in red5.properties: "rtmps.keystorepass"
> 
>
>  
>
> Q1: how good to have same password for red5/conf/keystore
> and red5/conf/keystore.screen? Should I add additional parameter to set up
> separate password and customize keystore location?
>
>  
>
> The specified keystore/password are passed to the screensharing applet via
> : keystore as base64 encoded binary, password in plaintext.
>
>  
>
> To avoid compromising "main" keystore I did the following:
>
> 1) create separate keystore (keystore.screen) with its own key
>
> 2) add key from 1 to "original" keystore
>
>  
>
> Q2: Is this OK? Maybe anybody can suggest better (more secure) way of
> handling it? Probably without second certificate?
>
>  
>
> Thanks in advance
>
>  
>
> --
> WBR
> Maxim aka solomax
>
> *Stephen Cottham*
>
> *
> *Group IT Manager (Associate)
>
> Robert Bird Group
> Level 5, 333 Ann St
> Brisbane, Queensland, 4000, Australia
>
> *Phone: +6173 319 2777 (AUS)*
>
> *Phone: +44207 592 8000 (UK)*
>
> *Fax: +6173 319 2799*
>
>  
>
> *Mobile:  +61400 756 963 (AUS)*
>
> *Mobile:  +447900 918 616 (UK)*
>
> *Web: **www.robertbird.com* <http://www.robertbird.com/>
>
> <http://www.robertbird.com.au/>
>
> This email and any attachments are confidential and may contain legally
> privileged information or copyright material. Unless expressly stated,
> confidentiality and/or legal privilege is not intended to be waived by the
> sending of this email. The contents of this email, including any
> attachments, are intended solely for the use of the individual or entity to
> whom they are addressed. If you are not an intended recipient, please
> contact us immediately by return email and then delete both messages. You
> may not otherwise read, forward, copy, use or disclose this email or any
> attachments. Any views expressed in this email are those of the individual
> sender except where the sender expressly, and with authority, states
> otherwise. It is your responsibility to check any attachments for viruses
> or defects before opening or sending them on. None of the sender or its
> related entities accepts any liability for any consequential damage
> resulting from this email containing computer viruses. 
>
> 
>
>
> Disclaimer added by *CodeTwo Exchange Rules*
> www.codetwo.com
>
> ** **
>
>
>
> 
>
> ** **
>
> --
> WBR
> Maxim aka solomax
>
<><>

Re: RTMPSClient questions

[Maxim Solodovnik]

*once you use the screen sharing function once and then close it OM hangs
if you try and re-use it
I'll check

*What’s the security implications of using one keystore in this instance
Since keystore and password are passed unencrypted it is not good idea to
use you server cetificate

On Fri, May 18, 2012 at 7:01 PM, Stephen Cottham <
stephen.cott...@robertbird.com.au> wrote:

> One thing to mention, once you use the screen sharing function once and
> then close it OM hangs if you try and re-use it:
>
> ** **
>
> All I get in the logs is this:
>
> ** **
>
> [INFO] [NioProcessor-20]
> org.red5.server.net.rtmp.codec.RTMPProtocolDecoder - Action connect
>
> [WARN] [Red5_Scheduler_Worker-1] org.red5.server.net.rtmp.RTMPConnection -
> Closing RTMPMinaConnection from 10.17.23.28 : 11491 to
> ukmeeting.robertbird.com:5443 (in: 4016 out 4447 ), with id 19 due to
> long handshake
>
> [WARN] [Red5_Scheduler_Worker-2] org.red5.server.net.rtmp.RTMPConnection -
> Closing RTMPMinaConnection from 10.17.23.28 : 11389 to
> ukmeeting.robertbird.com:5443 (in: 837528 out 9656100 ), with id 17, due
> to too much inactivity (182997 ms), last ping sent 999 ms ago
>
> [WARN] [Red5_Scheduler_Worker-2] org.red5.server.net.rtmp.RTMPConnection -
> This often happens if YOUR Red5 application generated an exception on
> start-up. Check earlier in the log for that exception first!
>
> [INFO] [Red5_Scheduler_Worker-2]
> org.red5.server.stream.ClientBroadcastStream - Consumer disconnect
>
> [INFO] [Red5_Scheduler_Worker-2]
> org.red5.server.stream.ClientBroadcastStream - Stream close
>
> [INFO] [Red5_Scheduler_Worker-2]
> org.red5.server.stream.ClientBroadcastStream - Provider disconnect
>
> [INFO] [pool-4-thread-1]
> org.openmeetings.app.remote.red5.ScopeApplicationAdapter - W3C
> x-category:stream x-event:stop c-ip:10.17.23.28 cs-bytes:837528
> sc-bytes:9656100 x-sname:e2de090a-c38d-4a81-8116-67e4df778869
>
> [WARN] [Red5_Scheduler_Worker-1] org.red5.server.net.rtmp.RTMPConnection -
> Closing RTMPMinaConnection from 10.17.23.28 : 11436 to
> ukmeeting.robertbird.com:5443 (in: 876149 out 321723 ), with id 18, due
> to too much inactivity (61001 ms), last ping sent 999 ms ago
>
> [WARN] [Red5_Scheduler_Worker-1] org.red5.server.net.rtmp.RTMPConnection -
> This often happens if YOUR Red5 application generated an exception on
> start-up. Check earlier in the log for that exception first!
>
> [INFO] [Red5_Scheduler_Worker-1]
> org.red5.server.stream.ClientBroadcastStream - Stream close
>
> [INFO] [Red5_Scheduler_Worker-1]
> org.red5.server.stream.ClientBroadcastStream - Provider disconnect
>
> [WARN] [Red5_Scheduler_Worker-3] org.red5.server.net.rtmp.RTMPConnection -
> Closing RTMPMinaConnection from 10.17.23.35 : 52826 to
> ukmeeting.robertbird.com:5443 (in: 48452 out 463893 ), with id 7, due to
> too much inactivity (60999 ms), last ping sent 1001 ms ago
>
> [WARN] [Red5_Scheduler_Worker-3] org.red5.server.net.rtmp.RTMPConnection -
> This often happens if YOUR Red5 application generated an exception on
> start-up. Check earlier in the log for that exception first!
>
> ** **
>
> No earlier exceptions in the logs either. 
>
> ** **
>
> Cheers
>
> ** **
>
> ** **
>
> ** **
>
> *From:* Stephen Cottham
> *Sent:* Friday, 18 May 2012 1:00 PM
>
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* RE: RTMPSClient questions
>
> ** **
>
> Hey Maxim,
>
> ** **
>
> I’ve tested the latest build with HTTPS and RTMPS.
>
> ** **
>
> Screen recording and screen sharing are working fine over encrypted
> streams.
>
> ** **
>
> What’s the security implications of using one keystore in this instance?
> Assuming the password is hashed in the JNLP file before it connects?
>
> ** **
>
> Looks good!
>
> ** **
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Friday, 18 May 2012 12:24 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* RE: RTMPSClient questions
>
> ** **
>
> Since now MySQL JDBC driver is not included into bundle
>
> You need to manually download it
> Or while building from the sources run "ant -Ddb=mysql"
>
> On May 18, 2012 6:20 PM, "Stephen Cottham" <
> stephen.cott...@robertbird.com.au> wrote:
>
> Hey Maxim,
>
>  
>
> Im trying the latest build and getting the following error on start-up:***
> *
>
>  
>
> ERROR 05-18 12:17:43.467 ScopeApplicationAdapter.java 7790 174
> org.openmeetings.app.remote.red5.ScopeApplicationAdapter
> [Launcher:/open

Re: RTMPSClient questions

[Maxim Solodovnik]

*once you use the screen sharing function once and then close it OM hangs
if you try and re-use it

I was unable to reproduce this
everything works for me as expected

On Fri, May 18, 2012 at 7:56 PM, Maxim Solodovnik wrote:

> *once you use the screen sharing function once and then close it OM hangs
> if you try and re-use it
> I'll check
>
> *What’s the security implications of using one keystore in this instance
> Since keystore and password are passed unencrypted it is not good idea to
> use you server cetificate
>
> On Fri, May 18, 2012 at 7:01 PM, Stephen Cottham <
> stephen.cott...@robertbird.com.au> wrote:
>
>> One thing to mention, once you use the screen sharing function once and
>> then close it OM hangs if you try and re-use it:
>>
>> ** **
>>
>> All I get in the logs is this:
>>
>> ** **
>>
>> [INFO] [NioProcessor-20]
>> org.red5.server.net.rtmp.codec.RTMPProtocolDecoder - Action connect
>>
>> [WARN] [Red5_Scheduler_Worker-1] org.red5.server.net.rtmp.RTMPConnection
>> - Closing RTMPMinaConnection from 10.17.23.28 : 11491 to
>> ukmeeting.robertbird.com:5443 (in: 4016 out 4447 ), with id 19 due to
>> long handshake
>>
>> [WARN] [Red5_Scheduler_Worker-2] org.red5.server.net.rtmp.RTMPConnection
>> - Closing RTMPMinaConnection from 10.17.23.28 : 11389 to
>> ukmeeting.robertbird.com:5443 (in: 837528 out 9656100 ), with id 17, due
>> to too much inactivity (182997 ms), last ping sent 999 ms ago
>>
>> [WARN] [Red5_Scheduler_Worker-2] org.red5.server.net.rtmp.RTMPConnection
>> - This often happens if YOUR Red5 application generated an exception on
>> start-up. Check earlier in the log for that exception first!
>>
>> [INFO] [Red5_Scheduler_Worker-2]
>> org.red5.server.stream.ClientBroadcastStream - Consumer disconnect
>>
>> [INFO] [Red5_Scheduler_Worker-2]
>> org.red5.server.stream.ClientBroadcastStream - Stream close
>>
>> [INFO] [Red5_Scheduler_Worker-2]
>> org.red5.server.stream.ClientBroadcastStream - Provider disconnect
>>
>> [INFO] [pool-4-thread-1]
>> org.openmeetings.app.remote.red5.ScopeApplicationAdapter - W3C
>> x-category:stream x-event:stop c-ip:10.17.23.28 cs-bytes:837528
>> sc-bytes:9656100 x-sname:e2de090a-c38d-4a81-8116-67e4df778869
>>
>> [WARN] [Red5_Scheduler_Worker-1] org.red5.server.net.rtmp.RTMPConnection
>> - Closing RTMPMinaConnection from 10.17.23.28 : 11436 to
>> ukmeeting.robertbird.com:5443 (in: 876149 out 321723 ), with id 18, due
>> to too much inactivity (61001 ms), last ping sent 999 ms ago
>>
>> [WARN] [Red5_Scheduler_Worker-1] org.red5.server.net.rtmp.RTMPConnection
>> - This often happens if YOUR Red5 application generated an exception on
>> start-up. Check earlier in the log for that exception first!
>>
>> [INFO] [Red5_Scheduler_Worker-1]
>> org.red5.server.stream.ClientBroadcastStream - Stream close
>>
>> [INFO] [Red5_Scheduler_Worker-1]
>> org.red5.server.stream.ClientBroadcastStream - Provider disconnect
>>
>> [WARN] [Red5_Scheduler_Worker-3] org.red5.server.net.rtmp.RTMPConnection
>> - Closing RTMPMinaConnection from 10.17.23.35 : 52826 to
>> ukmeeting.robertbird.com:5443 (in: 48452 out 463893 ), with id 7, due to
>> too much inactivity (60999 ms), last ping sent 1001 ms ago
>>
>> [WARN] [Red5_Scheduler_Worker-3] org.red5.server.net.rtmp.RTMPConnection
>> - This often happens if YOUR Red5 application generated an exception on
>> start-up. Check earlier in the log for that exception first!
>>
>> ** **
>>
>> No earlier exceptions in the logs either. 
>>
>> ** **
>>
>> Cheers
>>
>> ** **
>>
>> ** **
>>
>> ** **
>>
>> *From:* Stephen Cottham
>> *Sent:* Friday, 18 May 2012 1:00 PM
>>
>> *To:* openmeetings-user@incubator.apache.org
>> *Subject:* RE: RTMPSClient questions
>>
>> ** **
>>
>> Hey Maxim,
>>
>> ** **
>>
>> I’ve tested the latest build with HTTPS and RTMPS.
>>
>> ** **
>>
>> Screen recording and screen sharing are working fine over encrypted
>> streams.
>>
>> ** **
>>
>> What’s the security implications of using one keystore in this instance?
>> Assuming the password is hashed in the JNLP file before it connects?
>>
>> ** **
>>
>> Looks good!
>>
>> ** **
>>
>> ** **
>>
>> *From:* Maxim Solodovnik [mailto:solomax...@gmail.co

Re: RTMPSClient questions

[Maxim Solodovnik]

try to clean ivy cache (USER_HOME/.ivy)
and run "ant clean.all"

On Fri, May 18, 2012 at 8:47 PM, Stephen Cottham <
stephen.cott...@robertbird.com.au> wrote:

> Ok Maxim,
>
> ** **
>
> I’ll rebuild and try it again.
>
> ** **
>
> Thanks
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Friday, 18 May 2012 2:44 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: RTMPSClient questions
>
> ** **
>
> *once you use the screen sharing function once and then close it OM hangs
> if you try and re-use it
>
> ** **
>
> I was unable to reproduce this****
>
> everything works for me as expected
>
> On Fri, May 18, 2012 at 7:56 PM, Maxim Solodovnik 
> wrote:
>
> *once you use the screen sharing function once and then close it OM hangs
> if you try and re-use it
>
> I'll check
>
> *What’s the security implications of using one keystore in this instance**
> **
>
> Since keystore and password are passed unencrypted it is not good idea to
> use you server cetificate
>
> ** **
>
> On Fri, May 18, 2012 at 7:01 PM, Stephen Cottham <
> stephen.cott...@robertbird.com.au> wrote:
>
> One thing to mention, once you use the screen sharing function once and
> then close it OM hangs if you try and re-use it:
>
>  
>
> All I get in the logs is this:
>
>  
>
> [INFO] [NioProcessor-20]
> org.red5.server.net.rtmp.codec.RTMPProtocolDecoder - Action connect
>
> [WARN] [Red5_Scheduler_Worker-1] org.red5.server.net.rtmp.RTMPConnection -
> Closing RTMPMinaConnection from 10.17.23.28 : 11491 to
> ukmeeting.robertbird.com:5443 (in: 4016 out 4447 ), with id 19 due to
> long handshake
>
> [WARN] [Red5_Scheduler_Worker-2] org.red5.server.net.rtmp.RTMPConnection -
> Closing RTMPMinaConnection from 10.17.23.28 : 11389 to
> ukmeeting.robertbird.com:5443 (in: 837528 out 9656100 ), with id 17, due
> to too much inactivity (182997 ms), last ping sent 999 ms ago
>
> [WARN] [Red5_Scheduler_Worker-2] org.red5.server.net.rtmp.RTMPConnection -
> This often happens if YOUR Red5 application generated an exception on
> start-up. Check earlier in the log for that exception first!
>
> [INFO] [Red5_Scheduler_Worker-2]
> org.red5.server.stream.ClientBroadcastStream - Consumer disconnect
>
> [INFO] [Red5_Scheduler_Worker-2]
> org.red5.server.stream.ClientBroadcastStream - Stream close
>
> [INFO] [Red5_Scheduler_Worker-2]
> org.red5.server.stream.ClientBroadcastStream - Provider disconnect
>
> [INFO] [pool-4-thread-1]
> org.openmeetings.app.remote.red5.ScopeApplicationAdapter - W3C
> x-category:stream x-event:stop c-ip:10.17.23.28 cs-bytes:837528
> sc-bytes:9656100 x-sname:e2de090a-c38d-4a81-8116-67e4df778869
>
> [WARN] [Red5_Scheduler_Worker-1] org.red5.server.net.rtmp.RTMPConnection -
> Closing RTMPMinaConnection from 10.17.23.28 : 11436 to
> ukmeeting.robertbird.com:5443 (in: 876149 out 321723 ), with id 18, due
> to too much inactivity (61001 ms), last ping sent 999 ms ago
>
> [WARN] [Red5_Scheduler_Worker-1] org.red5.server.net.rtmp.RTMPConnection -
> This often happens if YOUR Red5 application generated an exception on
> start-up. Check earlier in the log for that exception first!
>
> [INFO] [Red5_Scheduler_Worker-1]
> org.red5.server.stream.ClientBroadcastStream - Stream close
>
> [INFO] [Red5_Scheduler_Worker-1]
> org.red5.server.stream.ClientBroadcastStream - Provider disconnect
>
> [WARN] [Red5_Scheduler_Worker-3] org.red5.server.net.rtmp.RTMPConnection -
> Closing RTMPMinaConnection from 10.17.23.35 : 52826 to
> ukmeeting.robertbird.com:5443 (in: 48452 out 463893 ), with id 7, due to
> too much inactivity (60999 ms), last ping sent 1001 ms ago
>
> [WARN] [Red5_Scheduler_Worker-3] org.red5.server.net.rtmp.RTMPConnection -
> This often happens if YOUR Red5 application generated an exception on
> start-up. Check earlier in the log for that exception first!
>
>  
>
> No earlier exceptions in the logs either. 
>
>  
>
> Cheers
>
>  
>
>  
>
>  
>
> *From:* Stephen Cottham
> *Sent:* Friday, 18 May 2012 1:00 PM
>
>
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* RE: RTMPSClient questions
>
>  
>
> Hey Maxim,
>
>  
>
> I’ve tested the latest build with HTTPS and RTMPS.
>
>  
>
> Screen recording and screen sharing are working fine over encrypted
> streams.
>
>  
>
> What’s the security implications of using one keystore in this instance?
> Assuming the password is hash

Re: Build #80 issue "Cannot load JDBC driver class 'com.mysql.jdbc.Driver' " for compiled package

[Maxim Solodovnik]

Hello George,

MySQL JDBC driver is licensed under LGPL which is not compatible with
Apache License .
This driver can not be packaged with OM (as well as Oracle and DB2 driver)
So from now users need to download MuSQL driver and put it into
red5/webapps/openmeetings/WEB_INF/lib manually

On Mon, May 21, 2012 at 7:43 AM, George Kirkham wrote:

> Hi,
>
> ** **
>
> I don’t know how much of an issue this is but it would be nice to let
> people know how to overcome the issue.
>
> ** **
>
> I downloaded the build
> https://builds.apache.org/job/openmeetings/lastSuccessfulBuild/artifact/singlewebapp/dist/apache-openmeetings-incubating-2.0.0.r1340587-19-05-2012_2317.tar.gz
> 
>
> ** **
>
> And when I attempted to run the install the following error happens;
>
> ** **
>
> Caused by: org.apache.openjpa.persistence.PersistenceException: Cannot
> load JDBC driver class 'com.mysql.jdbc.Driver'
>
> ** **
>
> I then downloaded the source for build #80 and compile it, the compile
> works as it downloads the required java libraries during the build.  (And
> no reports about missing “flash/trunk”).
>
> *
> https://builds.apache.org/job/openmeetings/lastSuccessfulBuild/artifact/singlewebapp/dist/apache-openmeetings-incubating-2.0.0.r1340587-19-05-2012_2317-src.tar.gz
> *
>
> * *
>
> Is there a way for people who download the compiled package to then
> include the required java libraries?  If so, we should update the doco on
> the page so that people know how to get openmeetings running. 
>
> ** **
>
> */red5/log/openmeetings.log*
>
> ERROR 05-21 07:48:25.613 ScopeApplicationAdapter.java 2332 174
> org.openmeetings.app.remote.red5.ScopeApplicationAdapter
> [Launcher:/openmeetings] - [appStart]
>
> org.springframework.transaction.CannotCreateTransactionException: Could
> not open JPA EntityManager for transaction; nested exception is
> 
> org.apache.openjpa.persistence.PersistenceException: Cannot load JDBC
> driver class 'com.mysql.jdbc.Driver'
>
>at
> org.springframework.orm.jpa.JpaTransactionManager.doBegin(JpaTransactionManager.java:427)
> ~[org.springframework.orm-jar-3.1.1.RELEASE.jar:3.1.1.RELEASE]
>
> ERROR 05-21 07:50:11.130 MeetingReminderJob.java 107849 38
> org.openmeetings.app.quartz.scheduler.MeetingReminderJob
> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-3] -
> execute
>
> ** **
>
> ** **
>
> Exclusive
>
> Thanks,
>
> ** **
>
> George Kirkham
>



-- 
WBR
Maxim aka solomax

Re: Build #80 issue "Cannot load JDBC driver class 'com.mysql.jdbc.Driver' " for compiled package

[Maxim Solodovnik]

Here is the URL
http://www.mysql.com/downloads/connector/j/


On Mon, May 21, 2012 at 10:03 AM, George Kirkham wrote:

> Maxim,
>
> ** **
>
> I am surprised that it is not part of the JDK and needs to be introduced
> separately?  
>
> ** **
>
> Both myself, and many other people would not know that they would need to
> or even how to “download MySQL driver and put it into
> red5/webapps/openmeetings/WEB_INF/lib manually”.
>
> ** **
>
> Would you please make an update to the
> http://incubator.apache.org/openmeetings/ web site, to explain how this
> can be achieved?
>
> ** **
>
> I would suggest a new point to the installation and upgrade pages,
> something like;
>
> 6. Download your database driver and copy to it into
>
> red5/webapps/openmeetings/WEB_INF/lib
>
> MySQL JDBC - http://www.oracle.com/drivers/
> Oracle ODBC - http://www.oracle.com/drivers/
> DB2 DBC - http://www.ibm.com/drivers/
>
> ** **
>
> ** **
>
> Stephen,  could you please update your OpenMeeting server build
> documentation for this new requirement?****
>
> ** **
>
> ** **
>
> Thanks,
>
> ** **
>
> George Kirkham
>
> ** **
>
> ** **
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Monday, 21 May 2012 12:23 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: Build #80 issue "Cannot load JDBC driver class
> 'com.mysql.jdbc.Driver' " for compiled package
>
> ** **
>
> Hello George,
>
> ** **
>
> MySQL JDBC driver is licensed under LGPL which is not compatible with
> Apache License .
>
> This driver can not be packaged with OM (as well as Oracle and DB2 driver)
> 
>
> So from now users need to download MuSQL driver and put it into
>
> red5/webapps/openmeetings/WEB_INF/lib manually
>
> On Mon, May 21, 2012 at 7:43 AM, George Kirkham 
> wrote:
>
> Hi,
>
>  
>
> I don’t know how much of an issue this is but it would be nice to let
> people know how to overcome the issue.
>
>  
>
> I downloaded the build
> https://builds.apache.org/job/openmeetings/lastSuccessfulBuild/artifact/singlewebapp/dist/apache-openmeetings-incubating-2.0.0.r1340587-19-05-2012_2317.tar.gz
> 
>
>  
>
> And when I attempted to run the install the following error happens;
>
>  
>
> Caused by: org.apache.openjpa.persistence.PersistenceException: Cannot
> load JDBC driver class 'com.mysql.jdbc.Driver'
>
>  
>
> I then downloaded the source for build #80 and compile it, the compile
> works as it downloads the required java libraries during the build.  (And
> no reports about missing “flash/trunk”).
>
> *
> https://builds.apache.org/job/openmeetings/lastSuccessfulBuild/artifact/singlewebapp/dist/apache-openmeetings-incubating-2.0.0.r1340587-19-05-2012_2317-src.tar.gz
> *
>
> * *
>
> Is there a way for people who download the compiled package to then
> include the required java libraries?  If so, we should update the doco on
> the page so that people know how to get openmeetings running. 
>
>  
>
> */red5/log/openmeetings.log*
>
> ERROR 05-21 07:48:25.613 ScopeApplicationAdapter.java 2332 174
> org.openmeetings.app.remote.red5.ScopeApplicationAdapter
> [Launcher:/openmeetings] - [appStart]
>
> org.springframework.transaction.CannotCreateTransactionException: Could
> not open JPA EntityManager for transaction; nested exception is
> 
> org.apache.openjpa.persistence.PersistenceException: Cannot load JDBC
> driver class 'com.mysql.jdbc.Driver'
>
>at
> org.springframework.orm.jpa.JpaTransactionManager.doBegin(JpaTransactionManager.java:427)
> ~[org.springframework.orm-jar-3.1.1.RELEASE.jar:3.1.1.RELEASE]
>
> ERROR 05-21 07:50:11.130 MeetingReminderJob.java 107849 38
> org.openmeetings.app.quartz.scheduler.MeetingReminderJob
> [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-3] -
> execute
>
>  
>
>  
>
> Exclusive
>
> Thanks,
>
>  
>
> George Kirkham
>
>
>
> 
>
> ** **
>
> --
> WBR
> Maxim aka solomax
>



-- 
WBR
Maxim aka solomax

Re: [openmeetings-user] Install on Debian on Amazon EC2 - IP address issue

[Maxim Solodovnik]

AWS private/public IP is not an issue.
Please check you have all necessary ports opened and DB installed/running.

On Mon, May 21, 2012 at 10:10 AM, bmullan  wrote:

> Sebastian
>
> I am new to OpenMeetings but like Alexander I am trying install OM2 on
> Amazon's (AWS) EC2 cloud.
> Like Alexander ...  I can get everything installed but OpenMeetings is NOT
> reachable from the internet.
>
> You may not be familiar with AWS but when you launch a Server on AWS EC2
> it gets 2 IP addresses, and a PUBLIC DNS name.
>
> There is a PUBLIC IP address that can connect to the server from the
> internet.
>
> However, there is also a PRIVATE IP address that is INTERNAL to the AWS
> cloud and NOT reachable by the internet.
> my example server:
>
> *Public DNS: ec2-23-23-198-151.compute-1.amazonaws.com*
> *Private DNS: ip-10-76-175-149.ec2.internal*
> *Private IP Address: 10.76.175.149*
>
> Any application trying to reach my server across the internet would point
> their URL to the PUBLIC DNS (which by the way the 23-23-198-151 is also the
> PUBLIC IP just substitute DOTS for the DASHS)
>
> An application on the internet could NOT access the Private DNS 
> *ip-10-76-175-149.ec2.internal
> (or 10.76.175.14) as that is internal to the AWS cloud only
>
> *However, ANY application *running ON that server* which is set to use
> either LOCALHOST -or- the PUBLIC DNS -or- the PUBLIC IP ... will
> automatically be redirected by the AWS Cloud virtualzation itself to the
> PRIVATE INTERNAL IP Address which is NOT reachable by the Internet.*
>
> For example if I am logged into that openmeetings server and I ping its
> PUBLIC DNS ec2-23-23-198-151.compute-1.amazonaws.com... I will really be
> pinging 10.76.175.149 ... the internal private IP.
>
> Therefore my OpenMeeting server (and I assume xander's) is NOT reachable
> from the internet the way OpenMeetings is configured and I get this screen
> when attempting to access it.  It stays at this message forever.  Yes, I
> have checked mysql password, userID and host and they are all correct.
>
> **http://23.23.198.151:5080/openmeetings/install*
> *
> *
> *OpenMeetings - Loading ...*
> * The server is not yet completely initialized. Please try again in a
> couple of seconds.*
> * If this message persists for several minutes contact your
> Sys-Administration.*
> * If that message stays forever you should check the logs located in *
>
> *openmeetings_install_dir/log*
>
> folder, probably your database user/pwd/host is wrong!
>
> I have also tried changing "hostname" in these files:*
> *
>
>- */etc/init.d/red5*
>- *
>/usr/lib/red5/webapps/openmeetings/WEB-INF/classes/META-INF/persistence.xml
>*
>- *and in the mysql openmeetings database *
>
> to the PUBLIC IP address of the AWS server and restarted everything and I
> still end up with the above message... waiting forever.
>
> So although I can reach something on the AWS Openmeetings server... there
> is something in the application configuration that is not communicating
> correctly in the AWS cloud environment.
> *
> *Any ideas or other configuration items I should be checking?
>
> Brian Mullan*
>
>
>
> *
>
>
>
>
> On Saturday, July 2, 2011 3:40:38 AM UTC-4, Sebastian Wagner wrote:
>>
>> Hi Alexander,
>>
>> the installation on EC2 is not really different from installing
>> OpenMeetings on any other dedicated server.
>> You can simply use the normal Installation Instructions.
>>
>> The Automatic Install Script is also not that up-to-date with the
>> latest version of OpenMeetings.
>> But why this line of the script:
>> Done!! open the website at your browser: http://$(ifconfig eth0 |grep
>> "inet addr:" |cut -d : -f 2 |cut -f1 -d" "):5080/openmeetings/install
>>
>> Does not return your IP ... I mean you know what IP / domain you got,
>> why not simply enter that address?
>>
>> Sebastian
>>
>>
>> 2011/7/1 Xander Dumaine :
>> > I created an instance on Amazon EC2 server running Debian 5.0. I used
>> > the automated script install found here:
>> > http://code.google.com/p/**openmeetings/wiki/Automatic_**
>> script_installation_for_Debian
>> >
>> > the installation says it was successfull, but I am unable to use the
>> > url it provided to me at the end of install, and also unable to use
>> > the dynamic url provided by amazon. Can anyone help me to figure out
>> > how to resolve this issue? If it is a setting I need to change, can
>> > you help me with that? Thanks,
>> > Xander
>> >
>> > --
>> > You received this message because you are subscribed to the Google
>> Groups "OpenMeetings User" group.
>> > To post to this group, send email to openmeetings-user@**
>> googlegroups.com .
>> > To unsubscribe from this group, send email to
>> openmeetings-user+unsubscribe@**googlegroups.com
>> .
>> > For more options, visit this group at http://groups.google.com/**
>> group/openmeetings-user?hl=en

Re: Why do I get "...flash/trunk/deploy does not exist." when I check out code and compile.

[Maxim Solodovnik]

According to your log:

[copy] Copying 2 files to
/usr/adm/compile/omall/openmeetings/trunk/singlewebapp/build/red5/dist/webapps/installer


 [copy] Warning:
/usr/adm/compile/omall/openmeetings/trunk/flash/trunk/deploy
does not exist.

It is not OM warning. It is Red5 warning.
The build process did the following:
1) svn checkout of Red5 server
2) build it

The issue you are complained about is Red5 server build warning.

On Mon, May 21, 2012 at 12:32 PM, George Kirkham wrote:

> Hi,
>
> ** **
>
> I am curious, why do I get  a warning for "...flash/trunk/deploy does not
> exist" when I check out code and compile ?  
>
> ** **
>
> Maybe I get too concerned about warning because of my previous ‘C’
> programming where warnings can have quite serious issues for stability. C
> is a great programming language, “it does just what the code tells it to
> do, where it is a good thing or not”.  Most other languages are more
> cautious and complain loudly.
>
> ** **
>
> I noticed that this “flash” warning only happens on the first compile, the
> second and third times that I run the compile this message is not created,
> however then there are many other warnings.
>
> ** **
>
> [javac] /usr/adm/compile/1340587/singlewebapp/build.xml:436: warning:
> 'includeantruntime' was not set, defaulting to build.sysclasspath=last; set
> to false for repeatable builds
>
> ** **
>
> I also get this warning when I compile for the first time from
> https://builds.apache.org/job/openmeetings/lastSuccessfulBuild/artifact/singlewebapp/dist/apache-openmeetings-incubating-2.0.0.r1340865-20-05-2012_2304-src.tar.gz
> 
>
> ** **
>
> Compile of revision 1340879;
>
> compile-demos:
>
>  [echo] Webapps dir: webapps
>
>  [echo] Webapps build dir: dist/webapps
>
>  [copy] Copying 8 files to
> /usr/adm/compile/omall/openmeetings/trunk/singlewebapp/build/red5/dist/webapps/root
> 
>
>  [copy] Copying 3 files to
> /usr/adm/compile/omall/openmeetings/trunk/singlewebapp/build/red5/dist/webapps/root
> 
>
>  [copy] Copying 11 files to
> /usr/adm/compile/omall/openmeetings/trunk/singlewebapp/build/red5/dist/webapps/vod
> 
>
>  [copy] Copying 3 files to
> /usr/adm/compile/omall/openmeetings/trunk/singlewebapp/build/red5/dist/webapps/live
> 
>
>  [copy] Copying 8 files to
> /usr/adm/compile/omall/openmeetings/trunk/singlewebapp/build/red5/dist/webapps/installer
> 
>
>  [copy] Copying 2 files to
> /usr/adm/compile/omall/openmeetings/trunk/singlewebapp/build/red5/dist/webapps/installer
> 
>
>  [copy] Warning: 
> /usr/adm/compile/omall/openmeetings/trunk/flash/trunk/deploy
> does not exist.
>
> ** **
>
> ** **
>
> Compile of revision 1340587;
>
> compile-demos:
>
>  [echo] Webapps dir: webapps
>
>  [echo] Webapps build dir: dist/webapps
>
>  [copy] Copying 8 files to
> /usr/adm/compile/1340587/singlewebapp/build/red5/dist/webapps/root
>
>  [copy] Copying 3 files to
> /usr/adm/compile/1340587/singlewebapp/build/red5/dist/webapps/root
>
>  [copy] Copying 11 files to
> /usr/adm/compile/1340587/singlewebapp/build/red5/dist/webapps/vod
>
>  [copy] Copying 3 files to
> /usr/adm/compile/1340587/singlewebapp/build/red5/dist/webapps/live
>
>  [copy] Copying 8 files to
> /usr/adm/compile/1340587/singlewebapp/build/red5/dist/webapps/installer***
> *
>
>  [copy] Copying 2 files to
> /usr/adm/compile/1340587/singlewebapp/build/red5/dist/webapps/installer***
> *
>
>  [copy] Warning: /usr/adm/compile/1340587/flash/trunk/deploy does not
> exist.
>
> ** **
>
> ** **
>
> Thanks,
>
> ** **
>
> George Kirkham
>
> ** **
>



-- 
WBR
Maxim aka solomax

RE: Why do I get "...flash/trunk/deploy does not exist." when I check out code and compile.

[Maxim Solodovnik]

Red5 is not packaged in OM sources. It is checked out, built and packaged
into binary OM distribution.

It is also not redownloaded/built in subsequent builds, this is why fresh
OM builds longer.
On May 21, 2012 12:39 PM, "George Kirkham"  wrote:

> ** **
>
> I had meant to attach the log files in case someone wanted to review them.
> 
>
> 1340879 is the first build, and 1340587a is a first build, is a second
> build 1340587b and 1340587c is the third build.  I understand the first
> time it caches downloaded items that it requires, and I guess compiles some
> files (?) but I do wonder why the warnings change so much, and whether some
> of these warnings should not be investigated.  I would but at this time I
> lack the knowledge.
>
> ** **
>
> Hi,
>
> ** **
>
> I am curious, why do I get  a warning for "...flash/trunk/deploy does not
> exist" when I check out code and compile ?  
>
> ** **
>
> Maybe I get too concerned about warning because of my previous ‘C’
> programming where warnings can have quite serious issues for stability. C
> is a great programming language, “it does just what the code tells it to
> do, where it is a good thing or not”.  Most other languages are more
> cautious and complain loudly.
>
> ** **
>
> I noticed that this “flash” warning only happens on the first compile, the
> second and third times that I run the compile this message is not created,
> however then there are many other warnings.
>
> ** **
>
> [javac] /usr/adm/compile/1340587/singlewebapp/build.xml:436: warning:
> 'includeantruntime' was not set, defaulting to build.sysclasspath=last; set
> to false for repeatable builds
>
> ** **
>
> I also get this warning when I compile for the first time from
> https://builds.apache.org/job/openmeetings/lastSuccessfulBuild/artifact/singlewebapp/dist/apache-openmeetings-incubating-2.0.0.r1340865-20-05-2012_2304-src.tar.gz
> 
>
> ** **
>
> Compile of revision 1340879;
>
> compile-demos:
>
>  [echo] Webapps dir: webapps
>
>  [echo] Webapps build dir: dist/webapps
>
>  [copy] Copying 8 files to
> /usr/adm/compile/omall/openmeetings/trunk/singlewebapp/build/red5/dist/webapps/root
> 
>
>  [copy] Copying 3 files to
> /usr/adm/compile/omall/openmeetings/trunk/singlewebapp/build/red5/dist/webapps/root
> 
>
>  [copy] Copying 11 files to
> /usr/adm/compile/omall/openmeetings/trunk/singlewebapp/build/red5/dist/webapps/vod
> 
>
>  [copy] Copying 3 files to
> /usr/adm/compile/omall/openmeetings/trunk/singlewebapp/build/red5/dist/webapps/live
> 
>
>  [copy] Copying 8 files to
> /usr/adm/compile/omall/openmeetings/trunk/singlewebapp/build/red5/dist/webapps/installer
> 
>
>  [copy] Copying 2 files to
> /usr/adm/compile/omall/openmeetings/trunk/singlewebapp/build/red5/dist/webapps/installer
> 
>
>  [copy] Warning: 
> /usr/adm/compile/omall/openmeetings/trunk/flash/trunk/deploy
> does not exist.
>
> ** **
>
> ** **
>
> Compile of revision 1340587;
>
> compile-demos:
>
>  [echo] Webapps dir: webapps
>
>  [echo] Webapps build dir: dist/webapps
>
>  [copy] Copying 8 files to
> /usr/adm/compile/1340587/singlewebapp/build/red5/dist/webapps/root
>
>  [copy] Copying 3 files to
> /usr/adm/compile/1340587/singlewebapp/build/red5/dist/webapps/root
>
>  [copy] Copying 11 files to
> /usr/adm/compile/1340587/singlewebapp/build/red5/dist/webapps/vod
>
>  [copy] Copying 3 files to
> /usr/adm/compile/1340587/singlewebapp/build/red5/dist/webapps/live
>
>  [copy] Copying 8 files to
> /usr/adm/compile/1340587/singlewebapp/build/red5/dist/webapps/installer***
> *
>
>  [copy] Copying 2 files to
> /usr/adm/compile/1340587/singlewebapp/build/red5/dist/webapps/installer***
> *
>
>  [copy] Warning: /usr/adm/compile/1340587/flash/trunk/deploy does not
> exist.
>
> ** **
>
> ** **
>
> Thanks,
>
> ** **
>
> George Kirkham
>
> ** **
>

Re: OpenMeeting Installation with Mysql

[Maxim Solodovnik]

in 1.9 there is no
mysql_hibernate.cfg.xml
you need to:
1) stop OM
2) edit and copy
red5/webapps/openmeetings/WEB-INF/classes/META-INF/mysql_persistance.xml
to red5/webapps/openmeetings/WEB-INF/classes/META-INF/persistance.xml
3) start OM

On Tue, May 22, 2012 at 10:38 PM, Alexei Fedotov
wrote:

> Openmeetings uses internal java DB now. You can still fall back to
> production DBs for a high load cluster environment by specifying proper url
> in persistence.xml
> 22.05.2012 17:56 пользователь "Kanwar Ajit"  написал:
>
>> **
>> Dear All,
>>
>> I am new to Open Meetings & I just Installed 1.9.1 OM on Centos 6.2 64
>> Bit by following word by word of this tutorial "
>> http://code.google.com/p/openmeetings/wiki/InstallationCentOS5"; but
>> couldn't find "mysql_hibernate.cfg.xml" file in the following path
>> /home/openmeetings/red5/webapps/openmeetings/conf so I have downloaded that
>> file from
>> "http://code.google.com/p/openmeetings/source/browse/trunk/singlewebapp/WebContent/conf/mysql_hibernate.cfg.xml?spec=svn3802&r=3802";.
>> Then I ran the install script but it didn't install any DB in mysql server
>> but open meetings has been installed & running. I am wondering where it has
>> created the Database.
>>
>> Can someone guide me a nice tutorial so that I can install OpenMeetings
>> 1.9.1 with Mysql.
>>
>>
>> Thanks in Advance,
>>
>


-- 
WBR
Maxim aka solomax

Re: OpenMeeting Installation with Mysql

[Maxim Solodovnik]

http://incubator.apache.org/openmeetings/MySQLConfig.html
"Steps todo" section

On Tue, May 22, 2012 at 11:09 PM, Kanwar Ajit  wrote:

> **
> On 05/22/2012 09:12 PM, Maxim Solodovnik wrote:
>
> in 1.9 there is no 
> mysql_hibernate.cfg.xml<http://code.google.com/p/openmeetings/source/browse/trunk/singlewebapp/WebContent/conf/mysql_hibernate.cfg.xml?spec=svn3802&r=3802>
> you need to:
> 1) stop OM
> 2) edit and copy
> red5/webapps/openmeetings/WEB-INF/classes/META-INF/mysql_persistance.xml
> to red5/webapps/openmeetings/WEB-INF/classes/META-INF/persistance.xml
> 3) start OM
>
>  On Tue, May 22, 2012 at 10:38 PM, Alexei Fedotov <
> alexei.fedo...@gmail.com> wrote:
>
>> Openmeetings uses internal java DB now. You can still fall back to
>> production DBs for a high load cluster environment by specifying proper url
>> in persistence.xml
>> 22.05.2012 17:56 пользователь "Kanwar Ajit" 
>> написал:
>>
>>>  Dear All,
>>>
>>> I am new to Open Meetings & I just Installed 1.9.1 OM on Centos 6.2 64
>>> Bit by following word by word of this tutorial "
>>> http://code.google.com/p/openmeetings/wiki/InstallationCentOS5"; but
>>> couldn't find "mysql_hibernate.cfg.xml" file in the following path
>>> /home/openmeetings/red5/webapps/openmeetings/conf so I have downloaded that
>>> file from
>>> "http://code.google.com/p/openmeetings/source/browse/trunk/singlewebapp/WebContent/conf/mysql_hibernate.cfg.xml?spec=svn3802&r=3802";<http://code.google.com/p/openmeetings/source/browse/trunk/singlewebapp/WebContent/conf/mysql_hibernate.cfg.xml?spec=svn3802&r=3802>.
>>> Then I ran the install script but it didn't install any DB in mysql server
>>> but open meetings has been installed & running. I am wondering where it has
>>> created the Database.
>>>
>>> Can someone guide me a nice tutorial so that I can install OpenMeetings
>>> 1.9.1 with Mysql.
>>>
>>>
>>> Thanks in Advance,
>>>
>>
>
>
>  --
> WBR
> Maxim aka solomax
>
> WOW
>
> Let me try it & will get back to you guys...
>
> Thanks a ton for this guide...
>
>
> Thanks,
> Kanwar Ajit
>



-- 
WBR
Maxim aka solomax

Re: soffice and red5 daemon

[Maxim Solodovnik]

Hello George,

since OM 2.0 there is no need to run soffice daemon, it is run
automatically by JODConverter on-demand.

On Thu, May 24, 2012 at 8:55 AM, George Kirkham wrote:

> Jaime,
>
> I may learn something here, but I understood that soffice is still used
> for the conversion, and that JODConverter uses soffice to do the
> conversion. If this is not the case, is there a way to select which will
> do the conversion?
>
> If I am wrong, when others respond to your question, I will learn
> further.
>
> I have found that the document conversion for PowerPoint 2007 .pptx
> files is not great and so I always save out to PDF from PowerPoint and
> then upload the PDF file, then OpenMeetings uses SWFTools' pdf2swf for
> the conversion and so text with font and layout looks much more like the
> original PowerPoint presentation.
>
> I always use /etc/init.d/red5 script to start and stop both soffice and
> red5 services.  And to check the status of the running services.
>
> Regards,
>
> George.
>
> -Original Message-
> From: Jaime Balbino [mailto:jaimeb...@gmail.com]
> Sent: Thursday, 24 May 2012 11:48 AM
> To: openmeetings-user@incubator.apache.org
> Subject: soffice and red5 daemon
>
> Hi,
>
> There is one thing I do not understand. When I run the script "red5.sh
> &" in the main directory I do not need soffice. But when I use the "/
> etc/init.d/red5 the" soffice runs as daemon and can not be disabled so
> that the text conversion to work.
>
> The soffice daemon is no longer necessary because of JODConverter. Why
> keep it inside the daemon red5?
>



-- 
WBR
Maxim aka solomax

Re: Non-credential version of OM?

[Maxim Solodovnik]

As an option you can generate endless room hash and enter to the room
directly by the URL

On Thu, May 24, 2012 at 12:30 AM, Gary Franklin <
gfrank...@tapestrysolutions.com> wrote:

>  Is there a clean way of disabling the need for usernames/passwords in
> OM2?  This would be used internally so we really don’t need to have
> passwords involved.
>
> ** **
>
> Gary
>



-- 
WBR
Maxim aka solomax

Re: Non-credential version of OM?

[Maxim Solodovnik]

If you have CSV list or DB you write simple php script to generate/send
links
The links might be one-time/time-interval/endless - its up to you :)

On Thu, May 24, 2012 at 9:14 AM, George Kirkham wrote:

> If a University was going to hold a classroom meeting for about 75 to 100
> people, what would be the best way to allow these (and only these) people
> to attend?
>
> ** **
>
> Create a timed generic invitation and then email out this same invitation
> to all 75 people?  Or can only one person use the link at a time? I tried
> two people logging in with the same link and that worked, just no way to
> differentiate them apart.
>
> ** **
>
> May Universities create accounts for all class members, and they each log
> in accordingly with their own accounts?
>
> ** **
>
> Just curious how best to handle a large number of guests, as inviting them
> one at a time would be painful.  
>
> ** **
>
> Thanks,
>
>
> George.
>
> ** **
>
> ** **
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Thursday, 24 May 2012 12:05 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: Non-credential version of OM?
>
> ** **
>
> As an option you can generate endless room hash and enter to the room
> directly by the URL
>
> On Thu, May 24, 2012 at 12:30 AM, Gary Franklin <
> gfrank...@tapestrysolutions.com> wrote:
>
> Is there a clean way of disabling the need for usernames/passwords in
> OM2?  This would be used internally so we really don’t need to have
> passwords involved.
>
>  
>
> Gary
>
>
>
> 
>
> ** **
>
> --
> WBR
> Maxim aka solomax
>



-- 
WBR
Maxim aka solomax

Re: SOAP setUserObjectAndGenerateRoomHashByURL error (-26)

[Maxim Solodovnik]

I thing you need to perform steps
1) 2) 4) 5) for the second login


On Thu, May 24, 2012 at 9:26 AM, madkoala (m...@madkoala.net)  wrote:

>  Hello. I'm working on integrating OM 1.9.1 and .NET Application (written
> in C#).
> Almost all features are working well, but there's a serious problem.
>
> Once I logged in, I can enter conference room successfully.
> But, after then, I can't move to another conference room.
> setUserObjectAndGenerateRoomHashByURL returns -26 (Admin authorization
> required).
>
> Here's my scenario.
>
> 1. call omUser.getSession();
> 2. call omUser.loginUser(omSession.session_id, 'admin', 'password', out
> retval, out retvalSpecified);→ 'admin' has administrator's rights in
> OM.
> 3. call omRoom.getRoomsPublic(omSession.session_id, 1, true); → this
> returns list of public conference rooms successfully.
> 4. call string roomHash =
> omUser.setUserObjectAndGenerateRoomHashByURL(omSession.session_id,
> "madkoala", "my", "name", string.Empty, 
> "madko...@gmail.com",
> 10, true, "my external system", room.rooms_id.Value, true, 0, true, 1,
> true);
> → 'madkoala' is my external system id (doesn't exists in OM now)
> 5. I can access conference room with that room hash. (
> http://myhost/openmeetings/?secureHash=roomHash)
> 6. When I try to join another conference room with same procedure 4-5
> above, setUserObjectAndGenerateRoomHashByURL returns -26.
> 7. Only after changing user type of 'madkoala' in OM to administrator, it
> works well.
>
> So, here's my question.
> 1. Are there any way to change user rights to administrator
> programmatically using SOAP?
> 2. Are the procedures above correctly implemented?
> 3. Is there a way to make it work (moving to another conference room)
> without changing user type?
>
> Thank you in advance.
>
>


-- 
WBR
Maxim aka solomax

Re: SOAP setUserObjectAndGenerateRoomHashByURL error (-26)

[Maxim Solodovnik]

I think
sorry

On Thu, May 24, 2012 at 9:31 AM, Maxim Solodovnik wrote:

> I thing you need to perform steps
> 1) 2) 4) 5) for the second login
>
>
> On Thu, May 24, 2012 at 9:26 AM, madkoala (m...@madkoala.net) <
> m...@madkoala.net> wrote:
>
>>  Hello. I'm working on integrating OM 1.9.1 and .NET Application
>> (written in C#).
>> Almost all features are working well, but there's a serious problem.
>>
>> Once I logged in, I can enter conference room successfully.
>> But, after then, I can't move to another conference room.
>> setUserObjectAndGenerateRoomHashByURL returns -26 (Admin authorization
>> required).
>>
>> Here's my scenario.
>>
>> 1. call omUser.getSession();
>> 2. call omUser.loginUser(omSession.session_id, 'admin', 'password', out
>> retval, out retvalSpecified);→ 'admin' has administrator's rights in
>> OM.
>> 3. call omRoom.getRoomsPublic(omSession.session_id, 1, true); → this
>> returns list of public conference rooms successfully.
>> 4. call string roomHash =
>> omUser.setUserObjectAndGenerateRoomHashByURL(omSession.session_id,
>> "madkoala", "my", "name", string.Empty, 
>> "madko...@gmail.com",
>> 10, true, "my external system", room.rooms_id.Value, true, 0, true, 1,
>> true);
>> → 'madkoala' is my external system id (doesn't exists in OM now)
>> 5. I can access conference room with that room hash. (
>> http://myhost/openmeetings/?secureHash=roomHash)
>> 6. When I try to join another conference room with same procedure 4-5
>> above, setUserObjectAndGenerateRoomHashByURL returns -26.
>> 7. Only after changing user type of 'madkoala' in OM to administrator, it
>> works well.
>>
>> So, here's my question.
>> 1. Are there any way to change user rights to administrator
>> programmatically using SOAP?
>> 2. Are the procedures above correctly implemented?
>> 3. Is there a way to make it work (moving to another conference room)
>> without changing user type?
>>
>> Thank you in advance.
>>
>>
>
>
> --
> WBR
> Maxim aka solomax
>



-- 
WBR
Maxim aka solomax

Re: FW: OpenMeetings Translation

[Maxim Solodovnik]

Please create JIRA issue and attach this file to it.
I'll commit it to the trunk

On Tue, May 22, 2012 at 12:25 PM, George Kirkham wrote:

> Sebastian,
>
> ** **
>
> A Chinese speaking colleague has updated the Chinese Simplified text for
> OpenMeetings.
>
> ** **
>
> Is there a OpenMeetings person who could review and then the updates made
> to OpenMeetings?
>
> ** **
>
> Thanks,
>
>
> George Kirkham 
>



-- 
WBR
Maxim aka solomax

Re: Non-credential version of OM?

[Maxim Solodovnik]

Unfortunately I don't have such script
You can take a look at
http://svn.apache.org/repos/asf/incubator/openmeetings/trunk/plugins/moodle_plugin/openmeetings_gateway.php


and try to create it yourself.

On Thu, May 24, 2012 at 9:25 AM, George Kirkham wrote:

> Does anyone have such a script, that they could forward to me, and I can
> then modify it as required.  As yet I do not know how to do this, certainly
> not the creation of the unique OpenMeetings invitation links.
>
> 
>
> I don’t currently have the need, but can guess that one day it would be
> very useful.
>
> ** **
>
> Thanks, George.****
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Thursday, 24 May 2012 12:22 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: Non-credential version of OM?
>
> ** **
>
> If you have CSV list or DB you write simple php script to generate/send
> links
>
> The links might be one-time/time-interval/endless - its up to you :)
>
> On Thu, May 24, 2012 at 9:14 AM, George Kirkham 
> wrote:
>
> If a University was going to hold a classroom meeting for about 75 to 100
> people, what would be the best way to allow these (and only these) people
> to attend?
>
>  
>
> Create a timed generic invitation and then email out this same invitation
> to all 75 people?  Or can only one person use the link at a time? I tried
> two people logging in with the same link and that worked, just no way to
> differentiate them apart.
>
>  
>
> May Universities create accounts for all class members, and they each log
> in accordingly with their own accounts?
>
>  
>
> Just curious how best to handle a large number of guests, as inviting them
> one at a time would be painful.  
>
>  
>
> Thanks,
>
>
> George.
>
>  
>
>  
>
>  
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Thursday, 24 May 2012 12:05 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: Non-credential version of OM?
>
>  
>
> As an option you can generate endless room hash and enter to the room
> directly by the URL
>
> On Thu, May 24, 2012 at 12:30 AM, Gary Franklin <
> gfrank...@tapestrysolutions.com> wrote:
>
> Is there a clean way of disabling the need for usernames/passwords in
> OM2?  This would be used internally so we really don’t need to have
> passwords involved.
>
>  
>
> Gary
>
>
>
> 
>
>  
>
> --
> WBR
> Maxim aka solomax
>
>
>
> 
>
> ** **
>
> --
> WBR
> Maxim aka solomax
>



-- 
WBR
Maxim aka solomax

Re: FW: OpenMeetings Translation

[Maxim Solodovnik]

could you please add language file as attachment?

On Thu, May 24, 2012 at 10:54 AM, Maxim Solodovnik wrote:

> Please create JIRA issue and attach this file to it.
> I'll commit it to the trunk
>
>
> On Tue, May 22, 2012 at 12:25 PM, George Kirkham 
> wrote:
>
>> Sebastian,
>>
>> ** **
>>
>> A Chinese speaking colleague has updated the Chinese Simplified text for
>> OpenMeetings.
>>
>> ** **
>>
>> Is there a OpenMeetings person who could review and then the updates made
>> to OpenMeetings?
>>
>> ** **
>>
>> Thanks,
>>
>>
>> George Kirkham 
>>
>
>
>
> --
> WBR
> Maxim aka solomax
>



-- 
WBR
Maxim aka solomax

Re: FW: OpenMeetings Translation

[Maxim Solodovnik]

you have attached it to OPENMEETINGS-283 instead of OPENMEETINGS-285 :))

On Thu, May 24, 2012 at 11:50 AM, Maxim Solodovnik wrote:

> could you please add language file as attachment?
>
>
> On Thu, May 24, 2012 at 10:54 AM, Maxim Solodovnik 
> wrote:
>
>> Please create JIRA issue and attach this file to it.
>> I'll commit it to the trunk
>>
>>
>> On Tue, May 22, 2012 at 12:25 PM, George Kirkham 
>> wrote:
>>
>>> Sebastian,
>>>
>>> ** **
>>>
>>> A Chinese speaking colleague has updated the Chinese Simplified text for
>>> OpenMeetings.
>>>
>>> ** **
>>>
>>> Is there a OpenMeetings person who could review and then the updates
>>> made to OpenMeetings?
>>>
>>> ** **
>>>
>>> Thanks,
>>>
>>>
>>> George Kirkham 
>>>
>>
>>
>>
>> --
>> WBR
>> Maxim aka solomax
>>
>
>
>
> --
> WBR
> Maxim aka solomax
>



-- 
WBR
Maxim aka solomax

Re: FW: OpenMeetings Translation OPENMEETINGS-285 Update for Chinese Language text

[Maxim Solodovnik]

Hold on with new translation, The text will be changed :)

On Thu, May 24, 2012 at 12:02 PM, George Kirkham wrote:

> Maxim,
>
> ** **
>
> I am glad someone is awake, and wow, your responsive, I could not even
> complete the record and you were asking for the attachments, great !
>
> ** **
>
> I had issues with the Windows Clipboard, so I tried copying the new
> differences back into my file, hope this worked.
>
> ** **
>
> OPENMEETINGS-285 Update for Chinese Language text
>
> ** **
>
> I see there are new test for translation. At a later time I will request
> these be translated too.
>
> ** **
>
> Thanks for all,
>
> ** **
>
> George.
>
> ** **
>
> PS:  It has been a busy day here for me, and to make it more fun, my main
> work computer has HD issues and I am using another computer in the mean
> time, which is why it is taking me longer to connect, set up, etc.
>
> ** **
>
> *From:* Maxim Solodovnik [mailto:solomax...@gmail.com]
> *Sent:* Thursday, 24 May 2012 2:55 PM
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* Re: FW: OpenMeetings Translation
>
> ** **
>
> you have attached it to OPENMEETINGS-283 instead of OPENMEETINGS-285 :))**
> **
>
> On Thu, May 24, 2012 at 11:50 AM, Maxim Solodovnik 
> wrote:
>
> could you please add language file as attachment?
>
> ** **
>
> On Thu, May 24, 2012 at 10:54 AM, Maxim Solodovnik 
> wrote:
>
> Please create JIRA issue and attach this file to it.
>
> I'll commit it to the trunk
>
> ** **
>
> On Tue, May 22, 2012 at 12:25 PM, George Kirkham 
> wrote:
>
> Sebastian,
>
>  
>
> A Chinese speaking colleague has updated the Chinese Simplified text for
> OpenMeetings.
>
>  
>
> Is there a OpenMeetings person who could review and then the updates made
> to OpenMeetings?
>
>  
>
> Thanks,
>
>
> George Kirkham 
>
>
>
> 
>
> ** **
>
> --
> WBR
> Maxim aka solomax
>
>
>
> 
>
> ** **
>
> --
> WBR
> Maxim aka solomax
>
>
>
> 
>
> ** **
>
> --
> WBR
> Maxim aka solomax
>



-- 
WBR
Maxim aka solomax

Re: Non-credential version of OM?

[Maxim Solodovnik]

call http://your_host:5080/openmeetings/services/UserService/getSession
remember session_id
call
http://your_host:5080/openmeetings/services/UserService/loginUser?SID=1180c6107b865a2098b9219c30b07372&username=admin&userpass=12345
user you username/password for user with rights admin or SOAP

http://your_host:5080/openmeetings/services/RoomService/sendInvitationHash

you can take a look at parameters by calling
http://192.168.72.100:5080/openmeetings/services/RoomService?wsdl


should be set to 1 == enless

On Thu, May 24, 2012 at 12:11 PM, john felipe urrego mejia <
ingenierofelipeurr...@gmail.com> wrote:

> How
>
> 2012/5/23 Maxim Solodovnik 
>
>> As an option you can generate endless room hash and enter to the room
>> directly by the URL
>>
>> On Thu, May 24, 2012 at 12:30 AM, Gary Franklin <
>> gfrank...@tapestrysolutions.com> wrote:
>>
>>>  Is there a clean way of disabling the need for usernames/passwords in
>>> OM2?  This would be used internally so we really don’t need to have
>>> passwords involved.
>>>
>>> ** **
>>>
>>> Gary
>>>
>>
>>
>>
>> --
>> WBR
>> Maxim aka solomax
>>
>
>


-- 
WBR
Maxim aka solomax

Re: Step by Step build instructions (Updates)

[Maxim Solodovnik]

try   *-XX:PermSize=128m*

On Thu, May 24, 2012 at 12:32 PM, Anand Ayyappan wrote:

> Hi Stephen,
>
> Doing that also didn't help.
>
> It still gives the following
> Exception in thread "Keep-Alive-Timer" java.lang.OutOfMemoryError: PermGen
> space
> at java.util.Collections.synchronizedList(Collections.java:1784)
> at java.util.Vector.subList(Vector.java:978)
> at sun.net.www.http.KeepAliveCache.run(KeepAliveCache.java:182)
> at java.lang.Thread.run(Thread.java:662)
> Exception in thread
> "org.springframework.scheduling.quartz.SchedulerFactoryBean#0_QuartzSchedulerThread"
> java.lang.OutOfMemoryError: PermGen space
> Exception in thread "RMI TCP Connection(idle)" java.lang.OutOfMemoryError:
> PermGen space
> Exception in thread "Red5_Scheduler_QuartzSchedulerThread"
> java.lang.OutOfMemoryError: PermGen space
> Exception in thread "Launcher:/live" java.lang.OutOfMemoryError: PermGen
> space
> Exception in thread
> "ContainerBackgroundProcessor[StandardEngine[red5RTMPTEngine]]"
> java.lang.OutOfMemoryError: PermGen space
> Exception in thread
> "ContainerBackgroundProcessor[StandardEngine[red5Engine]]"
> java.lang.OutOfMemoryError: PermGen space
>
> Thanks
>
> Anand Ayyappan
>
>
> "Formal education will make you a living; self-education will make you a
> fortune." - Jim Rohn
>
> Visit http://indya.co to post classifieds for free
>
> 
>
>


-- 
WBR
Maxim aka solomax

Re: Step by Step build instructions (Updates)

[Maxim Solodovnik]

or maybe even better

-Xmx1024m -XX:MaxPermSize=256m


On Thu, May 24, 2012 at 12:35 PM, Maxim Solodovnik wrote:

> try   *-XX:PermSize=128m*
>
>
> On Thu, May 24, 2012 at 12:32 PM, Anand Ayyappan 
> wrote:
>
>> Hi Stephen,
>>
>> Doing that also didn't help.
>>
>> It still gives the following
>> Exception in thread "Keep-Alive-Timer" java.lang.OutOfMemoryError:
>> PermGen space
>> at java.util.Collections.synchronizedList(Collections.java:1784)
>> at java.util.Vector.subList(Vector.java:978)
>> at sun.net.www.http.KeepAliveCache.run(KeepAliveCache.java:182)
>> at java.lang.Thread.run(Thread.java:662)
>> Exception in thread
>> "org.springframework.scheduling.quartz.SchedulerFactoryBean#0_QuartzSchedulerThread"
>> java.lang.OutOfMemoryError: PermGen space
>> Exception in thread "RMI TCP Connection(idle)"
>> java.lang.OutOfMemoryError: PermGen space
>> Exception in thread "Red5_Scheduler_QuartzSchedulerThread"
>> java.lang.OutOfMemoryError: PermGen space
>> Exception in thread "Launcher:/live" java.lang.OutOfMemoryError: PermGen
>> space
>> Exception in thread
>> "ContainerBackgroundProcessor[StandardEngine[red5RTMPTEngine]]"
>> java.lang.OutOfMemoryError: PermGen space
>> Exception in thread
>> "ContainerBackgroundProcessor[StandardEngine[red5Engine]]"
>> java.lang.OutOfMemoryError: PermGen space
>>
>> Thanks
>>
>> Anand Ayyappan
>>
>>
>> "Formal education will make you a living; self-education will make you a
>> fortune." - Jim Rohn
>>
>> Visit http://indya.co to post classifieds for free
>>
>> <http://www.mozilla.com/?from=sfx&uid=165364&t=557>
>>
>>
>
>
> --
> WBR
> Maxim aka solomax
>



-- 
WBR
Maxim aka solomax

Re: Step by Step build instructions (Updates)

[Maxim Solodovnik]

OK
please send me:
1) java -version
2) uname -a
3) cat /etc/*release*
4) amount of RAM

On Thu, May 24, 2012 at 12:47 PM, Anand Ayyappan wrote:

> Hi Maxim,
>
> Still the same.
>
> Thanks
>
> Anand Ayyappan
>
>
> "Formal education will make you a living; self-education will make you a
> fortune." - Jim Rohn
>
> Visit http://indya.co to post classifieds for free
>
> <http://www.mozilla.com/?from=sfx&uid=165364&t=557>
>
>
> On Thu, May 24, 2012 at 11:07 AM, Maxim Solodovnik 
> wrote:
>
>> or maybe even better
>>
>> -Xmx1024m -XX:MaxPermSize=256m
>>
>>
>> On Thu, May 24, 2012 at 12:35 PM, Maxim Solodovnik 
>> wrote:
>>
>>> try   *-XX:PermSize=128m*
>>>
>>>
>>> On Thu, May 24, 2012 at 12:32 PM, Anand Ayyappan <
>>> anandayyap...@gmail.com> wrote:
>>>
>>>> Hi Stephen,
>>>>
>>>> Doing that also didn't help.
>>>>
>>>> It still gives the following
>>>> Exception in thread "Keep-Alive-Timer" java.lang.OutOfMemoryError:
>>>> PermGen space
>>>> at java.util.Collections.synchronizedList(Collections.java:1784)
>>>> at java.util.Vector.subList(Vector.java:978)
>>>> at sun.net.www.http.KeepAliveCache.run(KeepAliveCache.java:182)
>>>> at java.lang.Thread.run(Thread.java:662)
>>>> Exception in thread
>>>> "org.springframework.scheduling.quartz.SchedulerFactoryBean#0_QuartzSchedulerThread"
>>>> java.lang.OutOfMemoryError: PermGen space
>>>> Exception in thread "RMI TCP Connection(idle)"
>>>> java.lang.OutOfMemoryError: PermGen space
>>>> Exception in thread "Red5_Scheduler_QuartzSchedulerThread"
>>>> java.lang.OutOfMemoryError: PermGen space
>>>> Exception in thread "Launcher:/live" java.lang.OutOfMemoryError:
>>>> PermGen space
>>>> Exception in thread
>>>> "ContainerBackgroundProcessor[StandardEngine[red5RTMPTEngine]]"
>>>> java.lang.OutOfMemoryError: PermGen space
>>>> Exception in thread
>>>> "ContainerBackgroundProcessor[StandardEngine[red5Engine]]"
>>>> java.lang.OutOfMemoryError: PermGen space
>>>>
>>>> Thanks
>>>>
>>>> Anand Ayyappan
>>>>
>>>>
>>>> "Formal education will make you a living; self-education will make you
>>>> a fortune." - Jim Rohn
>>>>
>>>> Visit http://indya.co to post classifieds for free
>>>>
>>>> <http://www.mozilla.com/?from=sfx&uid=165364&t=557>
>>>>
>>>>
>>>
>>>
>>> --
>>> WBR
>>> Maxim aka solomax
>>>
>>
>>
>>
>> --
>> WBR
>> Maxim aka solomax
>>
>
>


-- 
WBR
Maxim aka solomax

Re: Step by Step build instructions (Updates)

[Maxim Solodovnik]

I have tested multiple OM instances (2 instances) on single Red5 server
Everything works as expected

How many instances have you run?
Have you modified red5\webapps\openmeetings\WEB-INF\red5-web.properties of
every instance to make it work?

On Thu, May 24, 2012 at 1:24 PM, Anand Ayyappan wrote:

> Hi Stephen and Maxim,
>
> The installation was fine and the system is up and running.
>
> I this the whole problem was because of the multiple instances.
>
> May be you can look into these issues when some documentation about
> multiple instance is being created.
>
>
> Thanks
>
> Anand Ayyappan
>
>
> "Formal education will make you a living; self-education will make you a
> fortune." - Jim Rohn
>
> Visit http://indya.co to post classifieds for free
>
> 
>
>
> On Thu, May 24, 2012 at 11:34 AM, Anand Ayyappan 
> wrote:
>
>> Hi Maxim and stephen
>>
>> Sorry all this i had failed to tell an important point.
>>
>> I was installing multiple instance.
>>
>> i remove all other instances and now running only one.
>>
>> Now i am unable to connect and installation is currently proceeding.
>>
>> Will update once done.
>>
>> I had followed the instructions in the wiki reg multiple instances.
>>
>> Details asked by Maxim
>>
>> 1. java -version
>> java version "1.6.0_32"
>> Java(TM) SE Runtime Environment (build 1.6.0_32-b05)
>> Java HotSpot(TM) 64-Bit Server VM (build 20.7-b02, mixed mode)
>>
>> 2.uname -a
>> Linux one.intelligentlogix.com 3.2.0-24-generic #38-Ubuntu SMP Tue May 1
>> 16:180 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
>>
>> 3. cat /etc/*release*
>> DISTRIB_ID=Ubuntu
>> DISTRIB_RELEASE=12.04
>> DISTRIB_CODENAME=precise
>> DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS"
>>
>> 4. Ram 4GB
>>
>>
>>
>> Thanks
>>
>> Anand Ayyappan
>>
>>
>> "Formal education will make you a living; self-education will make you a
>> fortune." - Jim Rohn
>>
>> Visit http://indya.co to post classifieds for free
>>
>>  
>>
>>
>


-- 
WBR
Maxim aka solomax

Re: Step by Step build instructions (Updates)

[Maxim Solodovnik]

seems this feature need more testing :(

On Thu, May 24, 2012 at 1:42 PM, Anand Ayyappan wrote:

> Hi
>
> I had tried only two and also had made modifications in
>
>  red5\webapps\openmeetings\WEB-INF\red5-web.properties
>
>
> and config.xml
>
>
> Thanks
>
> Anand Ayyappan
>
>
> "Formal education will make you a living; self-education will make you a
> fortune." - Jim Rohn
>
> Visit http://indya.co to post classifieds for free
>
> <http://www.mozilla.com/?from=sfx&uid=165364&t=557>
>
>
> On Thu, May 24, 2012 at 11:58 AM, Maxim Solodovnik 
> wrote:
>
>> I have tested multiple OM instances (2 instances) on single Red5 server
>> Everything works as expected
>>
>> How many instances have you run?
>> Have you modified red5\webapps\openmeetings\WEB-INF\red5-web.properties
>> of every instance to make it work?
>>
>>
>> On Thu, May 24, 2012 at 1:24 PM, Anand Ayyappan 
>> wrote:
>>
>>> Hi Stephen and Maxim,
>>>
>>> The installation was fine and the system is up and running.
>>>
>>> I this the whole problem was because of the multiple instances.
>>>
>>> May be you can look into these issues when some documentation about
>>> multiple instance is being created.
>>>
>>>
>>> Thanks
>>>
>>> Anand Ayyappan
>>>
>>>
>>> "Formal education will make you a living; self-education will make you a
>>> fortune." - Jim Rohn
>>>
>>> Visit http://indya.co to post classifieds for free
>>>
>>> <http://www.mozilla.com/?from=sfx&uid=165364&t=557>
>>>
>>>
>>> On Thu, May 24, 2012 at 11:34 AM, Anand Ayyappan <
>>> anandayyap...@gmail.com> wrote:
>>>
>>>> Hi Maxim and stephen
>>>>
>>>> Sorry all this i had failed to tell an important point.
>>>>
>>>> I was installing multiple instance.
>>>>
>>>> i remove all other instances and now running only one.
>>>>
>>>> Now i am unable to connect and installation is currently proceeding.
>>>>
>>>> Will update once done.
>>>>
>>>> I had followed the instructions in the wiki reg multiple instances.
>>>>
>>>> Details asked by Maxim
>>>>
>>>> 1. java -version
>>>> java version "1.6.0_32"
>>>> Java(TM) SE Runtime Environment (build 1.6.0_32-b05)
>>>> Java HotSpot(TM) 64-Bit Server VM (build 20.7-b02, mixed mode)
>>>>
>>>> 2.uname -a
>>>> Linux one.intelligentlogix.com 3.2.0-24-generic #38-Ubuntu SMP Tue May
>>>> 1 16:180 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
>>>>
>>>> 3. cat /etc/*release*
>>>> DISTRIB_ID=Ubuntu
>>>> DISTRIB_RELEASE=12.04
>>>> DISTRIB_CODENAME=precise
>>>> DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS"
>>>>
>>>> 4. Ram 4GB
>>>>
>>>>
>>>>
>>>> Thanks
>>>>
>>>> Anand Ayyappan
>>>>
>>>>
>>>> "Formal education will make you a living; self-education will make you
>>>> a fortune." - Jim Rohn
>>>>
>>>> Visit http://indya.co to post classifieds for free
>>>>
>>>>  <http://www.mozilla.com/?from=sfx&uid=165364&t=557>
>>>>
>>>>
>>>
>>
>>
>> --
>> WBR
>> Maxim aka solomax
>>
>
>


-- 
WBR
Maxim aka solomax

Re: SOAP setUserObjectAndGenerateRoomHashByURL error (-26)

[Maxim Solodovnik]

I would create enum first so these codes will not be "cryptic" to the
developers :)
On May 24, 2012 2:43 PM, "seba.wag...@gmail.com" 
wrote:

> Btw: Those cryptic error codes are no way to confuse people :)
> There is an SOAP/REST call to get a localized message for every error id:
> http://incubator.apache.org/openmeetings/UserService.html#getErrorByCode
>
> However, I think we should generate a page in our docs that shows a list
> with the errors in a table.
> I will look at a way how we can generate this website, similar to the way
> the SOAP/REST API Reference is generated.
>
> Sebastian
>
> 2012/5/24 Maxim Solodovnik 
>
>> I think
>> sorry
>>
>>
>> On Thu, May 24, 2012 at 9:31 AM, Maxim Solodovnik 
>> wrote:
>>
>>> I thing you need to perform steps
>>> 1) 2) 4) 5) for the second login
>>>
>>>
>>> On Thu, May 24, 2012 at 9:26 AM, madkoala (m...@madkoala.net) <
>>> m...@madkoala.net> wrote:
>>>
>>>>  Hello. I'm working on integrating OM 1.9.1 and .NET Application
>>>> (written in C#).
>>>> Almost all features are working well, but there's a serious problem.
>>>>
>>>> Once I logged in, I can enter conference room successfully.
>>>> But, after then, I can't move to another conference room.
>>>> setUserObjectAndGenerateRoomHashByURL returns -26 (Admin authorization
>>>> required).
>>>>
>>>> Here's my scenario.
>>>>
>>>> 1. call omUser.getSession();
>>>> 2. call omUser.loginUser(omSession.session_id, 'admin', 'password',
>>>> out retval, out retvalSpecified);→ 'admin' has administrator's
>>>> rights in OM.
>>>> 3. call omRoom.getRoomsPublic(omSession.session_id, 1, true); → this
>>>> returns list of public conference rooms successfully.
>>>> 4. call string roomHash =
>>>> omUser.setUserObjectAndGenerateRoomHashByURL(omSession.session_id,
>>>> "madkoala", "my", "name", string.Empty, 
>>>> "madko...@gmail.com",
>>>> 10, true, "my external system", room.rooms_id.Value, true, 0, true, 1,
>>>> true);
>>>> → 'madkoala' is my external system id (doesn't exists in OM now)
>>>> 5. I can access conference room with that room hash. (
>>>> http://myhost/openmeetings/?secureHash=roomHash)
>>>> 6. When I try to join another conference room with same procedure 4-5
>>>> above, setUserObjectAndGenerateRoomHashByURL returns -26.
>>>> 7. Only after changing user type of 'madkoala' in OM to administrator,
>>>> it works well.
>>>>
>>>> So, here's my question.
>>>> 1. Are there any way to change user rights to administrator
>>>> programmatically using SOAP?
>>>> 2. Are the procedures above correctly implemented?
>>>> 3. Is there a way to make it work (moving to another conference room)
>>>> without changing user type?
>>>>
>>>> Thank you in advance.
>>>>
>>>>
>>>
>>>
>>> --
>>> WBR
>>> Maxim aka solomax
>>>
>>
>>
>>
>> --
>> WBR
>> Maxim aka solomax
>>
>
>
>
> --
> Sebastian Wagner
> https://twitter.com/#!/dead_lock
> http://www.openmeetings.de
> http://www.webbase-design.de
> http://www.wagner-sebastian.com
> seba.wag...@gmail.com
>

Re: SOAP setUserObjectAndGenerateRoomHashByURL error (-26)

[Maxim Solodovnik]

I mean in the code we have something like:
if (user_id < 0) {
  return -11;
}
And It is not very self descriptive

The code like
if (user_id < 0) {
  return INVALID_CREDENTIALS;
}
are easier to read.

On Thu, May 24, 2012 at 3:18 PM, seba.wag...@gmail.com <
seba.wag...@gmail.com> wrote:

> The errors are already in a XML file.
>
> https://svn.apache.org/repos/asf/incubator/openmeetings/trunk/singlewebapp/WebContent/languages/errorvalues.xml
>
> I think having the XML file is already the optimum for storing the error
> codes. However that XML file only contains label-Id's no actual text. That
> is the issue.
>
>
> Sebastian
>
> 2012/5/24 Maxim Solodovnik 
>
>> I would create enum first so these codes will not be "cryptic" to the
>> developers :)
>>  On May 24, 2012 2:43 PM, "seba.wag...@gmail.com" 
>> wrote:
>>
>>> Btw: Those cryptic error codes are no way to confuse people :)
>>> There is an SOAP/REST call to get a localized message for every error id:
>>> http://incubator.apache.org/openmeetings/UserService.html#getErrorByCode
>>>
>>> However, I think we should generate a page in our docs that shows a list
>>> with the errors in a table.
>>> I will look at a way how we can generate this website, similar to the
>>> way the SOAP/REST API Reference is generated.
>>>
>>> Sebastian
>>>
>>> 2012/5/24 Maxim Solodovnik 
>>>
>>>> I think
>>>> sorry
>>>>
>>>>
>>>> On Thu, May 24, 2012 at 9:31 AM, Maxim Solodovnik >>> > wrote:
>>>>
>>>>> I thing you need to perform steps
>>>>> 1) 2) 4) 5) for the second login
>>>>>
>>>>>
>>>>> On Thu, May 24, 2012 at 9:26 AM, madkoala (m...@madkoala.net) <
>>>>> m...@madkoala.net> wrote:
>>>>>
>>>>>>  Hello. I'm working on integrating OM 1.9.1 and .NET Application
>>>>>> (written in C#).
>>>>>> Almost all features are working well, but there's a serious problem.
>>>>>>
>>>>>> Once I logged in, I can enter conference room successfully.
>>>>>> But, after then, I can't move to another conference room.
>>>>>> setUserObjectAndGenerateRoomHashByURL returns -26 (Admin
>>>>>> authorization required).
>>>>>>
>>>>>> Here's my scenario.
>>>>>>
>>>>>> 1. call omUser.getSession();
>>>>>> 2. call omUser.loginUser(omSession.session_id, 'admin', 'password',
>>>>>> out retval, out retvalSpecified);→ 'admin' has administrator's
>>>>>> rights in OM.
>>>>>> 3. call omRoom.getRoomsPublic(omSession.session_id, 1, true); → this
>>>>>> returns list of public conference rooms successfully.
>>>>>> 4. call string roomHash =
>>>>>> omUser.setUserObjectAndGenerateRoomHashByURL(omSession.session_id,
>>>>>> "madkoala", "my", "name", string.Empty, 
>>>>>> "madko...@gmail.com",
>>>>>> 10, true, "my external system", room.rooms_id.Value, true, 0, true, 1,
>>>>>> true);
>>>>>> → 'madkoala' is my external system id (doesn't exists in OM now)
>>>>>> 5. I can access conference room with that room hash. (
>>>>>> http://myhost/openmeetings/?secureHash=roomHash)
>>>>>> 6. When I try to join another conference room with same procedure 4-5
>>>>>> above, setUserObjectAndGenerateRoomHashByURL returns -26.
>>>>>> 7. Only after changing user type of 'madkoala' in OM to
>>>>>> administrator, it works well.
>>>>>>
>>>>>> So, here's my question.
>>>>>> 1. Are there any way to change user rights to administrator
>>>>>> programmatically using SOAP?
>>>>>> 2. Are the procedures above correctly implemented?
>>>>>> 3. Is there a way to make it work (moving to another conference room)
>>>>>> without changing user type?
>>>>>>
>>>>>> Thank you in advance.
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> WBR
>>>>> Maxim aka solomax
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> WBR
>>>> Maxim aka solomax
>>>>
>>>
>>>
>>>
>>> --
>>> Sebastian Wagner
>>> https://twitter.com/#!/dead_lock
>>> http://www.openmeetings.de
>>> http://www.webbase-design.de
>>> http://www.wagner-sebastian.com
>>> seba.wag...@gmail.com
>>>
>>
>
>
> --
> Sebastian Wagner
> https://twitter.com/#!/dead_lock
> http://www.openmeetings.de
> http://www.webbase-design.de
> http://www.wagner-sebastian.com
> seba.wag...@gmail.com
>



-- 
WBR
Maxim aka solomax

Re: Error While Recording.

[Maxim Solodovnik]

you need to install ubuntu-restricted-extras

On Thu, May 24, 2012 at 5:25 PM, Anand Ayyappan wrote:

> Hi,
> I had setup openmeetings on ubuntu 12.04
>
> While recording i get following error
>
>
> Log:24.05.2012 15:49:13
> generateFFMPEG
> process-generateFullFLV
> error-ffmpeg version 0.8.1-4:0.8.1-0ubuntu1, Copyright (c) 2000-2011 the
> Libav developers
>   built on Mar 22 2012 05:09:06 with gcc 4.6.3
> This program is not developed anymore and is only provided for
> compatibility. Use avconv instead (see Changelog for the list of
> incompatible changes).
> [flv @ 0x214f7a0] Estimating duration from bitrate, this may be inaccurate
>
> Seems stream 0 codec frame rate differs from container frame rate: 1000.00
> (1000/1) -> 2.00 (2/1)
> Input #0, flv, from
> '/usr/lib/red5/webapps/live/streams/1/rec_1_stream_bcde3e33a0275b58cd96e02d38f58359_24_05_2012_05_17_31.flv':
>   Metadata:
> noaudiocodec: 0
> server  : Red5 Server 1.0.0 RC2 Rev: 4357
> creationdate: Thu May 24 05:19:11 CDT 2012
> canSeekToEnd: true
>   Duration: 00:00:44.50, start: 0.00, bitrate: 753 kb/s
> Stream #0.0: Video: flashsv, bgr24, 1366x768, 753 kb/s, 2 tbr, 1k tbn,
> 1k tbc
> [wav @ 0x2150040] max_analyze_duration reached
> Input #1, wav, from
> '/usr/lib/red5/webapps/live/streams/1/rec_1_stream_1_24_05_2012_05_18_02_FULL_WAVE.wav':
>   Duration: 00:01:42.75, bitrate: 352 kb/s
> Stream #1.0: Audio: pcm_s16le, 22050 Hz, 1 channels, s16, 352 kb/s
> Unknown encoder 'libmp3lame'
>
> command-[ffmpeg, -i,
> /usr/lib/red5/webapps/live/streams/1/rec_1_stream_bcde3e33a0275b58cd96e02d38f58359_24_05_2012_05_17_31.flv,
> -i,
> /usr/lib/red5/webapps/live/streams/1/rec_1_stream_1_24_05_2012_05_18_02_FULL_WAVE.wav,
> -ar, 22050, -acodec, libmp3lame, -ab, 32k, -s, 1360x768, -vcodec, flashsv,
> -map, 0:0, -map, 1:0,
> /usr/lib/red5/webapps/live/streams/hibernate/flvRecording_1.flv]
> exitValue-1
> out-
>
>
> Log:24.05.2012 15:49:13
> generateFFMPEG
> process-generateFullFLV
> error-ffmpeg version 0.8.1-4:0.8.1-0ubuntu1, Copyright (c) 2000-2011 the
> Libav developers
>   built on Mar 22 2012 05:09:06 with gcc 4.6.3
> This program is not developed anymore and is only provided for
> compatibility. Use avconv instead (see Changelog for the list of
> incompatible changes).
> /usr/lib/red5/webapps/live/streams/hibernate/flvRecording_1.flv: No such
> file or directory
>
> command-[ffmpeg, -i,
> /usr/lib/red5/webapps/live/streams/hibernate/flvRecording_1.flv, -vcodec,
> mjpeg, -vframes, 1, -an, -f, rawvideo, -s, 1360x768,
> /usr/lib/red5/webapps/live/streams/hibernate/flvRecording_1.jpg]
> exitValue-1
> out-
>
>
> Log:24.05.2012 15:49:13
> generateFFMPEG
> process-alternateDownload
> error-ffmpeg version 0.8.1-4:0.8.1-0ubuntu1, Copyright (c) 2000-2011 the
> Libav developers
>   built on Mar 22 2012 05:09:06 with gcc 4.6.3
> This program is not developed anymore and is only provided for
> compatibility. Use avconv instead (see Changelog for the list of
> incompatible changes).
> /usr/lib/red5/webapps/live/streams/hibernate/flvRecording_1.flv: No such
> file or directory
>
> command-[ffmpeg, -i,
> /usr/lib/red5/webapps/live/streams/hibernate/flvRecording_1.flv, -vcodec,
> copy, /usr/lib/red5/webapps/live/streams/hibernate/flvRecording_1.avi]
> exitValue-1
> out-
>
> What might have gone wrong.
>
> Thanks
>
> Anand Ayyappan
>
>
> "Formal education will make you a living; self-education will make you a
> fortune." - Jim Rohn
>
> Visit http://indya.co to post classifieds for free
>
> 
>



-- 
WBR
Maxim aka solomax

Re: compiling swftools in Debian and Ubuntu

[Maxim Solodovnik]

you can try to get *.deb file from
http://linuxappfinder.com/package/swftools
0.9.0-0ubuntu2 works fine on my Ubuntu 10.10-12.04

On Sat, May 26, 2012 at 12:09 PM, George Kirkham wrote:

> Stehpen,
>
> I reported the issue to the SWF Tools forum and they have now replied"The 
> 'test' command has the -o and -L switches.  AFAIAA, 'test' was
> replaced with 'rm -f', but, the extra switches got accidentally left
> behind.  The Makefile for both current and Git versions no longer contains
> them".
>
> It was also suggested that I add the following packages.  Do you know if
> they are requried or not ?
> apt-get install libfontconfig1-dev libfftw3-dev libzzip-dev libpoppler-dev
>
>
>   * George Kirkham *
>
>
>
>
> At Saturday, 26/05/2012 on 12:01 am Stephen Cottham wrote:
>
> Ok tested on clean Ubuntu and the same error occurs now, I don’t
> understand that at all because I didn’t need to do anything different the
> first time round yet now it fails, the only thing I left out of this new
> build was installing Open Office and Java, I just skipped straight to the
> SWFTools install.
>
>
>
> I can confirm that removing the –o and –L from the swfs/Makefile allows it
> to complete.
>
>
>
> Cheers
>
>
>
>
>
>
>
>
>
>
>
>
>
> *From:* Stephen Cottham [mailto:stephen.cott...@robertbird.com.au]
> *Sent:* 25 May 2012 14:27
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* RE: compiling swftools in Debian and Ubuntu
>
>
>
> Hey George,
>
>
>
> This also fails on a  fresh build of Debian, like you if I just edited the
> file /swf/Makefile and removed the –o and –L it continues and installs.
>
>
>
> I’ll have to try the Ubuntu again later but this was working yesterday so
> im somewhat confused if that also now fails.
>
>
>
> Either way it does seem like an issue with the installation package.
>
>
>
> Cheers
>
>
>
>
>
>
>
> *From:* Stephen Cottham 
> [mailto:stephen.cott...@robertbird.com.au]<[mailto:stephen.cott...@robertbird.com.au]>
> *Sent:* 25 May 2012 13:52
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* RE: compiling swftools in Debian and Ubuntu
>
>
>
> Hey George
>
>
>
> I can confirm that Debian Squeeze also failed but I had success with
> Ubuntu.
>
>
>
> I’ll build two new fresh ones and confirm both for you.
>
>
>
> Cheers
>
>
>
>
>
>
>
>
>
>
>
> *From:* George Kirkham [mailto:gkirk...@co2crc.com.au (Exchange)]
> *Sent:* 25 May 2012 13:49
> *To:* openmeetings-user@incubator.apache.org
> *Subject:* RE: compiling swftools in Debian and Ubuntu
>
>
>
> Stephen,
>
> Thanks for doing a test for me. Debian Squeeze I guess?   It will be a
> while before I can build a clean debian and test again, but if the below
> works for you, I will have to test again for me.
>
> Thanks,
>
> *George Kirkham** *
>
>
>
>
> At Friday, 25/05/2012 on 10:44 pm Stephen Cottham wrote:
>
> Hi George,
>
>
>
> The way I sent you the other day worked fine for me multiple times on the
> Ubuntu system, no need to manipulate the make file, this is curious that
> you had to. (I’ll test Debian right now)
>
>
>
> *cd /usr/adm*
>
> *wget http://www.swftools.org/swftools-0.9.2.tar.gz*
>
> *tar -zxvf swftools-0.9.2.tar.gz*
>
> *cd swftools-0.9.2*
>
> *./configure*
>
> *make *
>
> *make install*
>
> Once that has completed you can now test it by issuing the following:
>
> *pdf2swf –version*
>
> Which should give you the following output:
>
> *pdf2swf - part of swftools 0.9.2*
>
>
>
> This is on a fresh install following the guide thou, was this a pre-built
> machine you had been using?
>
>
> Cheers
>
>
>
>
>
>
>
>
>
> *Stephen Cottham
> *Group IT Manager (Associate)
>
> Robert Bird Group
> Level 5, 333 Ann St
> Brisbane, Queensland, 4000, Australia
>
> *Phone: +6173 319 2777 (AUS)*
>
> *Phone: +44207 592 8000 (UK)*
>
> *Fax: +6173 319 2799*
>
>
>
> *Mobile:  +61400 756 963 (AUS)*
>
> *Mobile:  +447900 918 616 (UK)*
>
> *Web: **www.robertbird.com* 
>
> 
>
> This email and any attachments are confidential and may contain legally
> privileged information or copyright material. Unless expressly stated,
> confidentiality and/or legal privilege is not intended to be waived by the
> sending of this email. The contents of this email, including any
> attachments, are intended solely for the use of the individual or entity to
> whom they are addressed. If you are not an intended recipient, please
> contact us immediately by return email and then delete both messages. You
> may not otherwise read, forward, copy, use or disclose this email or any
> attachments. Any views expressed in this email are those of the individual
> sender except where the sender expressly, and with authority, states
> otherwise. It is your responsibility to check any attachments for viruses
> or defects before opening or sending them on. None of the sender or its
> related entities accepts any liability for any consequential damage
> resulting from this email containing computer viruses.
>
>
> Disclaimer added b