date:20210607

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: linux-oracle (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-oracle in Ubuntu.
https://bugs.launchpad.net/bugs/1921632

Title:
  build module CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH=m for 5.11,
  5.13-rc2 and later

Status in linux package in Ubuntu:
  Confirmed
Status in linux-oracle package in Ubuntu:
  Confirmed
Status in linux source package in Hirsute:
  Fix Committed
Status in linux-oracle source package in Hirsute:
  Confirmed
Status in linux source package in Impish:
  Confirmed
Status in linux-oracle source package in Impish:
  Confirmed

Bug description:
  [Impact]
  Ubuntu users ran the kernel on the Dell soundwire audio machines,
  the dmesg shows the audio mchine driver is not found, then the
  audio fails to initialize

  [Fix]
  Enable the intel soundwire audio machine driver and some related
  codec driver.

  [Test]
  run fakeroot debian/rules clean updateconfigs, and check the
  config.common.ubuntu, the content is not changed.
  Build the kernel with this patch applied, the soundwire audio
  machine driver is built.

  
  [Where problems could occur]
  This could possibly introduce the building failure, I tested it,
  so far no failure.

  
  See also
  https://bugzilla.kernel.org/show_bug.cgi?id=212465

  Default kernel from
  https://cdimage.ubuntu.com/kubuntu/daily-live/20210327/
  and also upstream kernel
  https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.12-rc4/

  tested and both do not work.
  ---
  ProblemType: Bug
  ApportVersion: 2.20.11-0ubuntu61
  Architecture: amd64
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', 
'/dev/snd/controlC0', '/dev/snd/hwC0D2', '/dev/snd/pcmC0D3p', 
'/dev/snd/pcmC0D2p', '/dev/snd/pcmC0D1p', '/dev/snd/pcmC0D7c', 
'/dev/snd/pcmC0D6c', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
  CasperMD5CheckResult: pass
  DistroRelease: Ubuntu 21.04
  InstallationDate: Installed on 2021-03-28 (0 days ago)
  InstallationMedia: Kubuntu 21.04 "Hirsute Hippo" - Alpha amd64 (20210326)
  MachineType: HP HP Spectre x360 Convertible 13-aw2xxx
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_GB:en
   TERM=xterm-256color
   PATH=(custom, no user)
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 i915drmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-11-generic 
root=/dev/mapper/sys-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 5.11.0-11.12-generic 5.11.0
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-5.11.0-11-generic N/A
   linux-backports-modules-5.11.0-11-generic  N/A
   linux-firmware 1.195
  Tags:  hirsute
  Uname: Linux 5.11.0-11-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: N/A
  _MarkForUpload: True
  dmi.bios.date: 12/08/2020
  dmi.bios.release: 15.10
  dmi.bios.vendor: AMI
  dmi.bios.version: F.10
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 8709
  dmi.board.vendor: HP
  dmi.board.version: 31.30
  dmi.chassis.type: 31
  dmi.chassis.vendor: HP
  dmi.chassis.version: Chassis Version
  dmi.ec.firmware.release: 31.30
  dmi.modalias: 
dmi:bvnAMI:bvrF.10:bd12/08/2020:br15.10:efr31.30:svnHP:pnHPSpectrex360Convertible13-aw2xxx:pvr:rvnHP:rn8709:rvr31.30:cvnHP:ct31:cvrChassisVersion:
  dmi.product.family: 103C_5335KV HP Spectre
  dmi.product.name: HP Spectre x360 Convertible 13-aw2xxx
  dmi.product.sku: 2G2D8EA#ABU
  dmi.sys.vendor: HP

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1921632/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1921632] Re: build module CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH=m for 5.11, 5.13-rc2 and later

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: linux-oracle (Ubuntu Hirsute)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-oracle in Ubuntu.
https://bugs.launchpad.net/bugs/1921632

Title:
  build module CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH=m for 5.11,
  5.13-rc2 and later

Status in linux package in Ubuntu:
  Confirmed
Status in linux-oracle package in Ubuntu:
  Confirmed
Status in linux source package in Hirsute:
  Fix Committed
Status in linux-oracle source package in Hirsute:
  Confirmed
Status in linux source package in Impish:
  Confirmed
Status in linux-oracle source package in Impish:
  Confirmed

Bug description:
  [Impact]
  Ubuntu users ran the kernel on the Dell soundwire audio machines,
  the dmesg shows the audio mchine driver is not found, then the
  audio fails to initialize

  [Fix]
  Enable the intel soundwire audio machine driver and some related
  codec driver.

  [Test]
  run fakeroot debian/rules clean updateconfigs, and check the
  config.common.ubuntu, the content is not changed.
  Build the kernel with this patch applied, the soundwire audio
  machine driver is built.

  
  [Where problems could occur]
  This could possibly introduce the building failure, I tested it,
  so far no failure.

  
  See also
  https://bugzilla.kernel.org/show_bug.cgi?id=212465

  Default kernel from
  https://cdimage.ubuntu.com/kubuntu/daily-live/20210327/
  and also upstream kernel
  https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.12-rc4/

  tested and both do not work.
  ---
  ProblemType: Bug
  ApportVersion: 2.20.11-0ubuntu61
  Architecture: amd64
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', 
'/dev/snd/controlC0', '/dev/snd/hwC0D2', '/dev/snd/pcmC0D3p', 
'/dev/snd/pcmC0D2p', '/dev/snd/pcmC0D1p', '/dev/snd/pcmC0D7c', 
'/dev/snd/pcmC0D6c', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
  CasperMD5CheckResult: pass
  DistroRelease: Ubuntu 21.04
  InstallationDate: Installed on 2021-03-28 (0 days ago)
  InstallationMedia: Kubuntu 21.04 "Hirsute Hippo" - Alpha amd64 (20210326)
  MachineType: HP HP Spectre x360 Convertible 13-aw2xxx
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_GB:en
   TERM=xterm-256color
   PATH=(custom, no user)
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 i915drmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-11-generic 
root=/dev/mapper/sys-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 5.11.0-11.12-generic 5.11.0
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-5.11.0-11-generic N/A
   linux-backports-modules-5.11.0-11-generic  N/A
   linux-firmware 1.195
  Tags:  hirsute
  Uname: Linux 5.11.0-11-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: N/A
  _MarkForUpload: True
  dmi.bios.date: 12/08/2020
  dmi.bios.release: 15.10
  dmi.bios.vendor: AMI
  dmi.bios.version: F.10
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 8709
  dmi.board.vendor: HP
  dmi.board.version: 31.30
  dmi.chassis.type: 31
  dmi.chassis.vendor: HP
  dmi.chassis.version: Chassis Version
  dmi.ec.firmware.release: 31.30
  dmi.modalias: 
dmi:bvnAMI:bvrF.10:bd12/08/2020:br15.10:efr31.30:svnHP:pnHPSpectrex360Convertible13-aw2xxx:pvr:rvnHP:rn8709:rvr31.30:cvnHP:ct31:cvrChassisVersion:
  dmi.product.family: 103C_5335KV HP Spectre
  dmi.product.name: HP Spectre x360 Convertible 13-aw2xxx
  dmi.product.sku: 2G2D8EA#ABU
  dmi.sys.vendor: HP

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1921632/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1870779] Re: [nvidia] Ubuntu 20.04 beta: Blank/black screen after login on an Nvidia-only desktop (GeForce GTX 1060)

2021-06-07 Thread Muhammad Abdullah

*** This bug is a duplicate of bug 1869750 ***
https://bugs.launchpad.net/bugs/1869750

I am using Ubuntu 18.04.1 LTS.
It was working fine then PC feeling a little slow so I tried to restart the PC. 
When it did not respond I forced power off but pressing the power button.
When I restarted the PC, the display was working fine until the login screen. 
As soon as I logged in, the screen went black. I tried to restart it many times 
but got the same response. No display after loggin into the PC. The keyboard 
lights for num lock and caps lock are not lit either.
However I connected via ssh from another PC and the PC is ON. 
I got the Xorg log file attached below.

** Attachment added: "Xorg.0.log"
   
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1870779/+attachment/5502924/+files/Xorg.0.log

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to nvidia-graphics-drivers-440 in Ubuntu.
https://bugs.launchpad.net/bugs/1870779

Title:
  [nvidia] Ubuntu 20.04 beta: Blank/black screen after login on an
  Nvidia-only desktop (GeForce GTX 1060)

Status in nvidia-graphics-drivers-440 package in Ubuntu:
  Confirmed
Status in xorg-server package in Ubuntu:
  Confirmed

Bug description:
  I have the reproducible effect with Ubuntu 20.04 beta that I'm able to login 
right after installation, but after a few reboots a black screen is displayed 
after login.
  I'm able to switch to a tty and tried to collect information with ubuntu-bug, 
but I am not sure if that help. I'm happy to provide further information if 
needed.
  I reinstalled Ubuntu 20.04 a couple of times, the behaviour is always the 
same. 19.10 works without any problem.

  ProblemType: Bug
  DistroRelease: Ubuntu 20.04
  Package: xorg 1:7.7+19ubuntu14
  ProcVersionSignature: Ubuntu 5.4.0-21.25-generic 5.4.27
  Uname: Linux 5.4.0-21-generic x86_64
  NonfreeKernelModules: nvidia_modeset nvidia
  .proc.driver.nvidia.gpus..09.00.0: Error: [Errno 21] Is a directory: 
'/proc/driver/nvidia/gpus/:09:00.0'
  .proc.driver.nvidia.registry: Binary: ""
  .proc.driver.nvidia.suspend: suspend hibernate resume
  .proc.driver.nvidia.suspend_depth: default modeset uvm
  .proc.driver.nvidia.version:
   NVRM version: NVIDIA UNIX x86_64 Kernel Module  440.64  Fri Feb 21 01:17:26 
UTC 2020
   GCC version:  gcc version 9.3.0 (Ubuntu 9.3.0-8ubuntu1)
  ApportVersion: 2.20.11-0ubuntu22
  Architecture: amd64
  BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log'
  Date: Sat Apr  4 14:05:01 2020
  DistUpgraded: Fresh install
  DistroCodename: focal
  DistroVariant: ubuntu
  DkmsStatus:
   nvidia, 440.64, 5.4.0-21-generic, x86_64: installed
   virtualbox, 6.1.4, 5.4.0-21-generic, x86_64: installed
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   NVIDIA Corporation GP106 [GeForce GTX 1060 6GB] [10de:1c03] (rev a1) 
(prog-if 00 [VGA controller])
     Subsystem: Dell GP106 [GeForce GTX 1060 6GB] [1028:11d7]
  InstallationDate: Installed on 2020-04-03 (0 days ago)
  InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200402)
  MachineType: Dell Inc. Inspiron 5675
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-21-generic 
root=UUID=3210a7fb-4a4d-4b22-ba85-60282726ebc3 ro quiet splash vt.handoff=7
  SourcePackage: xorg
  Symptom: display
  Title: Xorg crash
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 03/14/2018
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 1.3.7
  dmi.board.name: 0477DV
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 3
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: 1.3.7
  dmi.modalias: 
dmi:bvnDellInc.:bvr1.3.7:bd03/14/2018:svnDellInc.:pnInspiron5675:pvr1.3.7:rvnDellInc.:rn0477DV:rvrA00:cvnDellInc.:ct3:cvr1.3.7:
  dmi.product.family: Inspiron
  dmi.product.name: Inspiron 5675
  dmi.product.sku: 07EE
  dmi.product.version: 1.3.7
  dmi.sys.vendor: Dell Inc.
  version.compiz: compiz N/A
  version.libdrm2: libdrm2 2.4.100-4
  version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.2-1ubuntu1
  version.libgl1-mesa-glx: libgl1-mesa-glx N/A
  version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A
  version.xserver-xorg-core: xserver-xorg-core 2:1.20.7-2ubuntu2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20190815-1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-440/+bug/1870779/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net

[Kernel-packages] [Bug 1786013] Autopkgtest regression report (linux-meta-raspi2/4.15.0.1087.84)

2021-06-07 Thread Ubuntu SRU Bot

All autopkgtests for the newly accepted linux-meta-raspi2 (4.15.0.1087.84) for 
bionic have finished running.
The following regressions have been reported in tests triggered by the package:

langford/unknown (arm64)
r8168/8.045.08-2ubuntu1 (armhf)
snapd/unknown (arm64)
systemd/unknown (arm64)
lttng-modules/unknown (arm64)
rtl8821ce/unknown (arm64)
adv-17v35x/unknown (arm64)
xtables-addons/unknown (arm64)
nat-rtsp/unknown (arm64)
acpi-call/unknown (arm64)
ddcci-driver-linux/unknown (arm64)
glibc/unknown (arm64)
dm-writeboost/unknown (arm64)
asic0x/unknown (arm64)
bbswitch/unknown (arm64)
lime-forensics/unknown (arm64)
rtl8821ce/5.5.2.1-0ubuntu3~18.04.1 (armhf)
ktap/unknown (arm64)
fwts/unknown (arm64)
rtl8812au/unknown (arm64)
spl-linux/unknown (arm64)
west-chamber/unknown (arm64)
dpdk/unknown (arm64)
v4l2loopback/unknown (arm64)
zfs-linux/unknown (arm64)
langford/0.0.20130228-5ubuntu1 (armhf)
wireguard-linux-compat/unknown (arm64)
r8168/unknown (arm64)


Please visit the excuses page listed below and investigate the failures, 
proceeding afterwards as per the StableReleaseUpdates policy regarding 
autopkgtest regressions [1].

https://people.canonical.com/~ubuntu-archive/proposed-
migration/bionic/update_excuses.html#linux-meta-raspi2

[1] https://wiki.ubuntu.com/StableReleaseUpdates#Autopkgtest_Regressions

Thank you!

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-azure in Ubuntu.
https://bugs.launchpad.net/bugs/1786013

Title:
  Packaging resync

Status in linux package in Ubuntu:
  Fix Released
Status in linux-azure package in Ubuntu:
  Fix Released
Status in linux-azure-edge package in Ubuntu:
  Confirmed
Status in linux source package in Precise:
  Fix Released
Status in linux-azure source package in Precise:
  Invalid
Status in linux-azure-edge source package in Precise:
  Invalid
Status in linux source package in Trusty:
  Fix Released
Status in linux-azure source package in Trusty:
  Fix Released
Status in linux-azure-edge source package in Trusty:
  Invalid
Status in linux source package in Xenial:
  Fix Released
Status in linux-azure source package in Xenial:
  Fix Released
Status in linux-azure-edge source package in Xenial:
  Fix Released
Status in linux source package in Bionic:
  Fix Released
Status in linux-azure source package in Bionic:
  Fix Released
Status in linux-azure-edge source package in Bionic:
  Fix Released
Status in linux source package in Cosmic:
  Fix Released
Status in linux-azure source package in Cosmic:
  Fix Released
Status in linux-azure-edge source package in Cosmic:
  Confirmed
Status in linux source package in Disco:
  Fix Released
Status in linux-azure source package in Disco:
  Fix Released
Status in linux-azure-edge source package in Disco:
  Won't Fix

Bug description:
  Ongoing packing resyncs.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1786013/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1839912] Re: test_map in ubuntu_bpf failed with "Allowed update sockmap '0:3' not in ESTABLISHED"

2021-06-07 Thread Stefan Bader

** Changed in: linux (Ubuntu Bionic)
   Importance: Undecided => Medium

** Changed in: linux (Ubuntu Bionic)
   Status: New => In Progress

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1839912

Title:
  test_map in ubuntu_bpf failed with "Allowed update sockmap '0:3' not
  in ESTABLISHED"

Status in ubuntu-kernel-tests:
  New
Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Bionic:
  In Progress

Bug description:
  This is at lease a test case regression with the proposed kernel:
  selftests: test_maps
  
  Allowed update sockmap '0:3' not in ESTABLISHED
  not ok 1..3 selftests:  test_maps [FAIL]

  But with older kernel:
  selftests: test_maps
  
  test_maps: OK
  ok 1..3 selftests: test_maps [PASS]

  ProblemType: Bug
  DistroRelease: Ubuntu 18.04
  Package: linux-image-4.15.0-58-generic 4.15.0-58.64
  ProcVersionSignature: User Name 4.15.0-58.64-generic 4.15.18
  Uname: Linux 4.15.0-58-generic x86_64
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Aug 13 03:42 seq
   crw-rw 1 root audio 116, 33 Aug 13 03:42 timer
  AplayDevices: Error: [Errno 2] No such file or directory: 'aplay': 'aplay'
  ApportVersion: 2.20.9-0ubuntu7.7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord': 
'arecord'
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  Date: Tue Aug 13 03:52:52 2019
  IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig': 'iwconfig'
  MachineType: Intel Corporation S1200RP
  PciMultimedia:
   
  ProcFB: 0 mgadrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-58-generic 
root=UUID=b0d2ae4e-12dd-423e-acea-272ee8b2a893 ro
  RelatedPackageVersions:
   linux-restricted-modules-4.15.0-58-generic N/A
   linux-backports-modules-4.15.0-58-generic  N/A
   linux-firmware 1.173.10
  RfKill: Error: [Errno 2] No such file or directory: 'rfkill': 'rfkill'
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 07/01/2015
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: S1200RP.86B.03.02.0003.070120151022
  dmi.board.asset.tag: 
  dmi.board.name: S1200RP
  dmi.board.vendor: Intel Corporation
  dmi.board.version: G62254-407
  dmi.chassis.asset.tag: 
  dmi.chassis.type: 17
  dmi.chassis.vendor: ..
  dmi.chassis.version: ..
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrS1200RP.86B.03.02.0003.070120151022:bd07/01/2015:svnIntelCorporation:pnS1200RP:pvr:rvnIntelCorporation:rnS1200RP:rvrG62254-407:cvn..:ct17:cvr..:
  dmi.product.family: To be filled by O.E.M.
  dmi.product.name: S1200RP
  dmi.product.version: 
  dmi.sys.vendor: Intel Corporation

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1839912/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1930188] Re: Acer Aspire 5 sound driver issues

2021-06-07 Thread Hui Wang

Please install the testing pulseaudio, reboot and redo the test.This
pulseaudio is for fixing the issue of "speaker and headphone share the
same volume".

https://launchpad.net/~hui.wang/+archive/ubuntu/pa-testing

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1930188

Title:
  Acer Aspire 5 sound driver issues

Status in linux package in Ubuntu:
  New

Bug description:
  Hello,

  There seems to be lots of issues in sound driver for Acer Aspire
  A515-56-57XR with ALC255. I will list all of them below and what I
  have tried so far.

  1. Headphones appears always plugged in even if they are physically not
  2. When actually plugging in headset/earphones it does not auto switch from 
speakers/internal mic to headphones/headset microphone automatically and vice 
versa, have to manually switch everytime.
  3. External headset/earphones microphone won't work at all

  After, logs of trial and error I have found a temporary fix. This
  seems to use legacy intel drivers which solves all 3 issues mentioned
  above but the internal/dmic mic is completely gone (which seems
  intentional when using this). Both depreciated dmic_detect and
  dsp_driver works, I have been using dsp_driver for now as I need
  external microphone at any cost.

  End of /etc/modprobe.d/alsa-base.conf
  # Headset mic fix
  options snd-hda-intel dmic_detect=0 / options snd-intel-dspcfg dsp_driver=1
  options snd-hda-intel model=alc255-acer

  In another thread similar to this I got some support and at least
  fixed the external microphone without using the alsa-base.conf change
  in custom modified kernel. I will attach it here. Now, hoping to fix
  other issues as well slowly like making headphones unplugged when
  physically removing as well as auto switching like the legacy driver
  one.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1930188/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1927108] Re: Raspberry Pi kernel config doesn't match generic for NFT, breaks LXD

This bug was fixed in the package linux-raspi - 5.8.0-1026.29

---
linux-raspi (5.8.0-1026.29) groovy; urgency=medium

  * groovy/linux-raspi: 5.8.0-1026.29 -proposed tracker (LP: #1930377)

  [ Ubuntu: 5.8.0-55.62 ]

  * groovy/linux: 5.8.0-55.62 -proposed tracker (LP: #1930379)
  * [Potential Regression] Unable to create KVM with uvtool on Groovy ARM64
(LP: #1929925)
- SAUCE: KVM: arm64: Assign kvm_ipa_limit

linux-raspi (5.8.0-1025.28) groovy; urgency=medium

  * groovy/linux-raspi: 5.8.0-1025.28 -proposed tracker (LP: #1927588)

  * Groovy update: upstream stable patchset 2021-04-27 (LP: #1926360)
- [Config] raspi: Remove CONFIG_VFIO debian.raspi overrides and follow 
master

  * Groovy update: upstream stable patchset 2021-04-20 (LP: #1925259)
- [Config] raspi: updateconfigs for PCIE_BW
- [Packaging] raspi: update modules for rc-cec

  * Raspberry Pi kernel config doesn't match generic for NFT, breaks LXD
(LP: #1927108)
- [Config] raspi: SET NFT_FIB_INET=m

  * Support Auvidea B101 (TC358743) (LP: #1926755)
- [Config] raspi: Set VIDEO_TC358743=m

  * No iwilwifi driver in  Linux 5.4.0-1034-raspi (LP: #1925209)
- [Config] raspi: Set IWLWIFI=m

  [ Ubuntu: 5.8.0-54.61 ]

  * groovy/linux: 5.8.0-54.61 -proposed tracker (LP: #1927592)
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  *  netfilter: x_tables: fix compat match/target pad out-of-bound write
(LP: #1927682)
- netfilter: x_tables: fix compat match/target pad out-of-bound write
  * Groovy update: upstream stable patchset 2021-05-04 (LP: #1927150)
- mt76: fix tx skb error handling in mt76_dma_tx_queue_skb
- net: fec: ptp: avoid register access when ipg clock is disabled
- powerpc/4xx: Fix build errors from mfdcr()
- atm: eni: dont release is never initialized
- atm: lanai: dont run lanai_dev_close if not open
- Revert "r8152: adjust the settings about MAC clock speed down for RTL8153"
- ALSA: hda: ignore invalid NHLT table
- ixgbe: Fix memleak in ixgbe_configure_clsu32
- scsi: ufs: ufs-qcom: Disable interrupt in reset path
- blk-cgroup: Fix the recursive blkg rwstat
- net: tehuti: fix error return code in bdx_probe()
- net: intel: iavf: fix error return code of iavf_init_get_resources()
- sun/niu: fix wrong RXMAC_BC_FRM_CNT_COUNT count
- cifs: ask for more credit on async read/write code paths
- gfs2: fix use-after-free in trans_drain
- cpufreq: blacklist Arm Vexpress platforms in cpufreq-dt-platdev
- gpiolib: acpi: Add missing IRQF_ONESHOT
- nfs: fix PNFS_FLEXFILE_LAYOUT Kconfig default
- NFS: Correct size calculation for create reply length
- net: hisilicon: hns: fix error return code of hns_nic_clear_all_rx_fetch()
- net: wan: fix error return code of uhdlc_init()
- net: davicom: Use platform_get_irq_optional()
- net: enetc: set MAC RX FIFO to recommended value
- atm: uPD98402: fix incorrect allocation
- atm: idt77252: fix null-ptr-dereference
- cifs: change noisy error message to FYI
- irqchip/ingenic: Add support for the JZ4760
- kbuild: add image_name to no-sync-config-targets
- kbuild: dummy-tools: fix inverted tests for gcc
- umem: fix error return code in mm_pci_probe()
- sparc64: Fix opcode filtering in handling of no fault loads
- habanalabs: Call put_pid() when releasing control device
- staging: rtl8192e: fix kconfig dependency on CRYPTO
- u64_stats,lockdep: Fix u64_stats_init() vs lockdep
- regulator: qcom-rpmh: Correct the pmic5_hfsmps515 buck
- block: Fix REQ_OP_ZONE_RESET_ALL handling
- drm/amd/display: Revert dram_clock_change_latency for DCN2.1
- drm/amdgpu: fb BO should be ttm_bo_type_device
- drm/radeon: fix AGP dependency
- nvme: add NVME_REQ_CANCELLED flag in nvme_cancel_request()
- nvme-fc: set NVME_REQ_CANCELLED in nvme_fc_terminate_exchange()
- nvme-fc: return NVME_SC_HOST_ABORTED_CMD when a command has been aborted
- nvme-rdma: Fix a use after free in nvmet_rdma_write_data_done
- nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a Samsung PM1725a
- nfs: we don't support removing system.nfs4_acl
- block: Suppress uevent for hidden device when removed
- ia64: fix ia64_syscall_get_set_arguments() for break-based syscalls
- ia64: fix ptrace(PTRACE_SYSCALL_INFO_EXIT) sign
- netsec: restore phy power state after controller reset
- platform/x86: intel-vbtn: Stop reporting SW_DOCK events
- psample: Fix user API breakage
- z3fold: prevent reclaim/free race for headless pages
- squashfs: fix inode lookup sanity checks
- squashfs: fix xattr id and id lookup sanity checks
- hugetlb_cgroup: fix i

[Kernel-packages] [Bug 1925209] Re: No iwilwifi driver in Linux 5.4.0-1034-raspi

This bug was fixed in the package linux-raspi - 5.8.0-1026.29

---
linux-raspi (5.8.0-1026.29) groovy; urgency=medium

  * groovy/linux-raspi: 5.8.0-1026.29 -proposed tracker (LP: #1930377)

  [ Ubuntu: 5.8.0-55.62 ]

  * groovy/linux: 5.8.0-55.62 -proposed tracker (LP: #1930379)
  * [Potential Regression] Unable to create KVM with uvtool on Groovy ARM64
(LP: #1929925)
- SAUCE: KVM: arm64: Assign kvm_ipa_limit

linux-raspi (5.8.0-1025.28) groovy; urgency=medium

  * groovy/linux-raspi: 5.8.0-1025.28 -proposed tracker (LP: #1927588)

  * Groovy update: upstream stable patchset 2021-04-27 (LP: #1926360)
- [Config] raspi: Remove CONFIG_VFIO debian.raspi overrides and follow 
master

  * Groovy update: upstream stable patchset 2021-04-20 (LP: #1925259)
- [Config] raspi: updateconfigs for PCIE_BW
- [Packaging] raspi: update modules for rc-cec

  * Raspberry Pi kernel config doesn't match generic for NFT, breaks LXD
(LP: #1927108)
- [Config] raspi: SET NFT_FIB_INET=m

  * Support Auvidea B101 (TC358743) (LP: #1926755)
- [Config] raspi: Set VIDEO_TC358743=m

  * No iwilwifi driver in  Linux 5.4.0-1034-raspi (LP: #1925209)
- [Config] raspi: Set IWLWIFI=m

  [ Ubuntu: 5.8.0-54.61 ]

  * groovy/linux: 5.8.0-54.61 -proposed tracker (LP: #1927592)
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  *  netfilter: x_tables: fix compat match/target pad out-of-bound write
(LP: #1927682)
- netfilter: x_tables: fix compat match/target pad out-of-bound write
  * Groovy update: upstream stable patchset 2021-05-04 (LP: #1927150)
- mt76: fix tx skb error handling in mt76_dma_tx_queue_skb
- net: fec: ptp: avoid register access when ipg clock is disabled
- powerpc/4xx: Fix build errors from mfdcr()
- atm: eni: dont release is never initialized
- atm: lanai: dont run lanai_dev_close if not open
- Revert "r8152: adjust the settings about MAC clock speed down for RTL8153"
- ALSA: hda: ignore invalid NHLT table
- ixgbe: Fix memleak in ixgbe_configure_clsu32
- scsi: ufs: ufs-qcom: Disable interrupt in reset path
- blk-cgroup: Fix the recursive blkg rwstat
- net: tehuti: fix error return code in bdx_probe()
- net: intel: iavf: fix error return code of iavf_init_get_resources()
- sun/niu: fix wrong RXMAC_BC_FRM_CNT_COUNT count
- cifs: ask for more credit on async read/write code paths
- gfs2: fix use-after-free in trans_drain
- cpufreq: blacklist Arm Vexpress platforms in cpufreq-dt-platdev
- gpiolib: acpi: Add missing IRQF_ONESHOT
- nfs: fix PNFS_FLEXFILE_LAYOUT Kconfig default
- NFS: Correct size calculation for create reply length
- net: hisilicon: hns: fix error return code of hns_nic_clear_all_rx_fetch()
- net: wan: fix error return code of uhdlc_init()
- net: davicom: Use platform_get_irq_optional()
- net: enetc: set MAC RX FIFO to recommended value
- atm: uPD98402: fix incorrect allocation
- atm: idt77252: fix null-ptr-dereference
- cifs: change noisy error message to FYI
- irqchip/ingenic: Add support for the JZ4760
- kbuild: add image_name to no-sync-config-targets
- kbuild: dummy-tools: fix inverted tests for gcc
- umem: fix error return code in mm_pci_probe()
- sparc64: Fix opcode filtering in handling of no fault loads
- habanalabs: Call put_pid() when releasing control device
- staging: rtl8192e: fix kconfig dependency on CRYPTO
- u64_stats,lockdep: Fix u64_stats_init() vs lockdep
- regulator: qcom-rpmh: Correct the pmic5_hfsmps515 buck
- block: Fix REQ_OP_ZONE_RESET_ALL handling
- drm/amd/display: Revert dram_clock_change_latency for DCN2.1
- drm/amdgpu: fb BO should be ttm_bo_type_device
- drm/radeon: fix AGP dependency
- nvme: add NVME_REQ_CANCELLED flag in nvme_cancel_request()
- nvme-fc: set NVME_REQ_CANCELLED in nvme_fc_terminate_exchange()
- nvme-fc: return NVME_SC_HOST_ABORTED_CMD when a command has been aborted
- nvme-rdma: Fix a use after free in nvmet_rdma_write_data_done
- nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a Samsung PM1725a
- nfs: we don't support removing system.nfs4_acl
- block: Suppress uevent for hidden device when removed
- ia64: fix ia64_syscall_get_set_arguments() for break-based syscalls
- ia64: fix ptrace(PTRACE_SYSCALL_INFO_EXIT) sign
- netsec: restore phy power state after controller reset
- platform/x86: intel-vbtn: Stop reporting SW_DOCK events
- psample: Fix user API breakage
- z3fold: prevent reclaim/free race for headless pages
- squashfs: fix inode lookup sanity checks
- squashfs: fix xattr id and id lookup sanity checks
- hugetlb_cgroup: fix i

[Kernel-packages] [Bug 1926755] Re: Support Auvidea B101 (TC358743)

This bug was fixed in the package linux-raspi - 5.8.0-1026.29

---
linux-raspi (5.8.0-1026.29) groovy; urgency=medium

  * groovy/linux-raspi: 5.8.0-1026.29 -proposed tracker (LP: #1930377)

  [ Ubuntu: 5.8.0-55.62 ]

  * groovy/linux: 5.8.0-55.62 -proposed tracker (LP: #1930379)
  * [Potential Regression] Unable to create KVM with uvtool on Groovy ARM64
(LP: #1929925)
- SAUCE: KVM: arm64: Assign kvm_ipa_limit

linux-raspi (5.8.0-1025.28) groovy; urgency=medium

  * groovy/linux-raspi: 5.8.0-1025.28 -proposed tracker (LP: #1927588)

  * Groovy update: upstream stable patchset 2021-04-27 (LP: #1926360)
- [Config] raspi: Remove CONFIG_VFIO debian.raspi overrides and follow 
master

  * Groovy update: upstream stable patchset 2021-04-20 (LP: #1925259)
- [Config] raspi: updateconfigs for PCIE_BW
- [Packaging] raspi: update modules for rc-cec

  * Raspberry Pi kernel config doesn't match generic for NFT, breaks LXD
(LP: #1927108)
- [Config] raspi: SET NFT_FIB_INET=m

  * Support Auvidea B101 (TC358743) (LP: #1926755)
- [Config] raspi: Set VIDEO_TC358743=m

  * No iwilwifi driver in  Linux 5.4.0-1034-raspi (LP: #1925209)
- [Config] raspi: Set IWLWIFI=m

  [ Ubuntu: 5.8.0-54.61 ]

  * groovy/linux: 5.8.0-54.61 -proposed tracker (LP: #1927592)
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  *  netfilter: x_tables: fix compat match/target pad out-of-bound write
(LP: #1927682)
- netfilter: x_tables: fix compat match/target pad out-of-bound write
  * Groovy update: upstream stable patchset 2021-05-04 (LP: #1927150)
- mt76: fix tx skb error handling in mt76_dma_tx_queue_skb
- net: fec: ptp: avoid register access when ipg clock is disabled
- powerpc/4xx: Fix build errors from mfdcr()
- atm: eni: dont release is never initialized
- atm: lanai: dont run lanai_dev_close if not open
- Revert "r8152: adjust the settings about MAC clock speed down for RTL8153"
- ALSA: hda: ignore invalid NHLT table
- ixgbe: Fix memleak in ixgbe_configure_clsu32
- scsi: ufs: ufs-qcom: Disable interrupt in reset path
- blk-cgroup: Fix the recursive blkg rwstat
- net: tehuti: fix error return code in bdx_probe()
- net: intel: iavf: fix error return code of iavf_init_get_resources()
- sun/niu: fix wrong RXMAC_BC_FRM_CNT_COUNT count
- cifs: ask for more credit on async read/write code paths
- gfs2: fix use-after-free in trans_drain
- cpufreq: blacklist Arm Vexpress platforms in cpufreq-dt-platdev
- gpiolib: acpi: Add missing IRQF_ONESHOT
- nfs: fix PNFS_FLEXFILE_LAYOUT Kconfig default
- NFS: Correct size calculation for create reply length
- net: hisilicon: hns: fix error return code of hns_nic_clear_all_rx_fetch()
- net: wan: fix error return code of uhdlc_init()
- net: davicom: Use platform_get_irq_optional()
- net: enetc: set MAC RX FIFO to recommended value
- atm: uPD98402: fix incorrect allocation
- atm: idt77252: fix null-ptr-dereference
- cifs: change noisy error message to FYI
- irqchip/ingenic: Add support for the JZ4760
- kbuild: add image_name to no-sync-config-targets
- kbuild: dummy-tools: fix inverted tests for gcc
- umem: fix error return code in mm_pci_probe()
- sparc64: Fix opcode filtering in handling of no fault loads
- habanalabs: Call put_pid() when releasing control device
- staging: rtl8192e: fix kconfig dependency on CRYPTO
- u64_stats,lockdep: Fix u64_stats_init() vs lockdep
- regulator: qcom-rpmh: Correct the pmic5_hfsmps515 buck
- block: Fix REQ_OP_ZONE_RESET_ALL handling
- drm/amd/display: Revert dram_clock_change_latency for DCN2.1
- drm/amdgpu: fb BO should be ttm_bo_type_device
- drm/radeon: fix AGP dependency
- nvme: add NVME_REQ_CANCELLED flag in nvme_cancel_request()
- nvme-fc: set NVME_REQ_CANCELLED in nvme_fc_terminate_exchange()
- nvme-fc: return NVME_SC_HOST_ABORTED_CMD when a command has been aborted
- nvme-rdma: Fix a use after free in nvmet_rdma_write_data_done
- nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a Samsung PM1725a
- nfs: we don't support removing system.nfs4_acl
- block: Suppress uevent for hidden device when removed
- ia64: fix ia64_syscall_get_set_arguments() for break-based syscalls
- ia64: fix ptrace(PTRACE_SYSCALL_INFO_EXIT) sign
- netsec: restore phy power state after controller reset
- platform/x86: intel-vbtn: Stop reporting SW_DOCK events
- psample: Fix user API breakage
- z3fold: prevent reclaim/free race for headless pages
- squashfs: fix inode lookup sanity checks
- squashfs: fix xattr id and id lookup sanity checks
- hugetlb_cgroup: fix i

[Kernel-packages] [Bug 1929646] Re: [SRU][OEM-5.10/H] Fix typec output on AMD Cezanne GPU

2021-06-07 Thread AaronMa

Verified on oem-5.10-1030, external monitor works fine after suspend.

** Tags removed: verification-needed-focal
** Tags added: verification-done-focal

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1929646

Title:
  [SRU][OEM-5.10/H] Fix typec output on AMD Cezanne GPU

Status in HWE Next:
  New
Status in linux package in Ubuntu:
  New
Status in linux-oem-5.10 package in Ubuntu:
  Invalid
Status in linux-oem-5.10 source package in Focal:
  Fix Committed
Status in linux source package in Hirsute:
  Fix Committed

Bug description:
  SRU justification:

  [Impact]
  Display can't work when replug in after suspend on AMD Cezanne platform.

  [Fix]
  Enable display power gating, display of typec will work as expected.

  [Test]
  Verified on hardware, suspend then replug the cable of typec, repeat for 10 
times, all good.

  [Where problems could occur]
  The AMD typec output may not output.
  Unstable kernel already got it, only for OEM-5.10/H.
  Minor changes during backport.

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1929646/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1929527] Re: Mark kprobe_args_user.tc in kselftest/ftrace as unsupported

2021-06-07 Thread Po-Hsu Lin

Works as expected in 5.4.0-75.84-generic on Focal s390x

# [41] Kprobe event user-memory access [UNSUPPORTED]


** Tags removed: verification-needed-focal
** Tags added: verification-done-focal

** Tags added: 5.4 focal ubuntu-kernel-selftests

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-oem-5.6 in Ubuntu.
https://bugs.launchpad.net/bugs/1929527

Title:
  Mark kprobe_args_user.tc in kselftest/ftrace as unsupported

Status in ubuntu-kernel-tests:
  In Progress
Status in linux package in Ubuntu:
  Fix Released
Status in linux-oem-5.6 package in Ubuntu:
  Invalid
Status in linux source package in Focal:
  Fix Committed
Status in linux-oem-5.6 source package in Focal:
  In Progress

Bug description:
  [Impact]
  This kprobe_args_user.tc test will be marked as "unresolved" and once causing 
failures in ftrace of our ubuntu_kernel_selftests (lp:1869227)

  Our workaround is to blacklist this test in autotest-client-tests [1]

  Note that with patch b730d668138cb3 ("ftrace/selftest: make unresolved
  cases cause failure if --fail-unresolved set") available, an
  unresolved case will not be treated as a failure unless we requested
  so.

  [1] https://kernel.ubuntu.com/git/ubuntu/autotest-client-
  
tests.git/commit/ubuntu_kernel_selftests/ubuntu_kernel_selftests.py?id=a381d47a9004388730e825cd20566ef102a29399

  [Fix]
  * 1e11b7dbef17bb selftests/ftrace: Return unsupported for the unconfigured 
features

  With this patch it will be marked as unsupported, easier to understand
  than unresolved.

  This patch can be found in Groovy and newer releases, and this test
  does not exist in Bionic and older releases.

  [Test]
  Tested on s390x / PowerPC, this will be marked as unsupported:
  $ sudo ./ftracetest test.d/kprobe/kprobe_args_user.tc
  === Ftrace unit tests ===
  [1] Kprobe event user-memory access   [UNSUPPORTED]

  # of passed:  0
  # of failed:  0
  # of unresolved:  0
  # of untested:  0
  # of unsupported:  1
  # of xfailed:  0
  # of undefined(test bug):  0
  $ echo $?
  0

  [Where problems could occur]
  Changes limited to testing tool, should not impact real kernel functionality. 
With this patch and local workaround in autotest-client-tests removed we might 
see failures in s390x / PowerPC in the future.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1929527/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1839912] Re: test_map in ubuntu_bpf failed with "Allowed update sockmap '0:3' not in ESTABLISHED"

2021-06-07 Thread Thadeu Lima de Souza Cascardo

** Description changed:

+ [Impact]  
   
+ test_maps bpf selftests is failing on bionic. 
   
+   
   
+ [Regression potential]
   
+ Kernel is not changed, but test may give a false pass with this change.   
   
+   
   
+ [Test case]   
   
+ The fixed test has been run on the kernel in -proposed, and passes.   
   
+ After building it, just run ./test_maps from tools/testing/selftests/bpf/.
   
+ 
+ --
+ 
  This is at lease a test case regression with the proposed kernel:
  selftests: test_maps
  
  Allowed update sockmap '0:3' not in ESTABLISHED
  not ok 1..3 selftests:  test_maps [FAIL]
  
  But with older kernel:
  selftests: test_maps
  
  test_maps: OK
  ok 1..3 selftests: test_maps [PASS]
  
  ProblemType: Bug
  DistroRelease: Ubuntu 18.04
  Package: linux-image-4.15.0-58-generic 4.15.0-58.64
  ProcVersionSignature: User Name 4.15.0-58.64-generic 4.15.18
  Uname: Linux 4.15.0-58-generic x86_64
  AlsaDevices:
-  total 0
-  crw-rw 1 root audio 116,  1 Aug 13 03:42 seq
-  crw-rw 1 root audio 116, 33 Aug 13 03:42 timer
+  total 0
+  crw-rw 1 root audio 116,  1 Aug 13 03:42 seq
+  crw-rw 1 root audio 116, 33 Aug 13 03:42 timer
  AplayDevices: Error: [Errno 2] No such file or directory: 'aplay': 'aplay'
  ApportVersion: 2.20.9-0ubuntu7.7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord': 
'arecord'
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  Date: Tue Aug 13 03:52:52 2019
  IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig': 'iwconfig'
  MachineType: Intel Corporation S1200RP
  PciMultimedia:
-  
+ 
  ProcFB: 0 mgadrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-58-generic 
root=UUID=b0d2ae4e-12dd-423e-acea-272ee8b2a893 ro
  RelatedPackageVersions:
-  linux-restricted-modules-4.15.0-58-generic N/A
-  linux-backports-modules-4.15.0-58-generic  N/A
-  linux-firmware 1.173.10
+  linux-restricted-modules-4.15.0-58-generic N/A
+  linux-backports-modules-4.15.0-58-generic  N/A
+  linux-firmware 1.173.10
  RfKill: Error: [Errno 2] No such file or directory: 'rfkill': 'rfkill'
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 07/01/2015
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: S1200RP.86B.03.02.0003.070120151022
  dmi.board.asset.tag: 
  dmi.board.name: S1200RP
  dmi.board.vendor: Intel Corporation
  dmi.board.version: G62254-407
  dmi.chassis.asset.tag: 
  dmi.chassis.type: 17
  dmi.chassis.vendor: ..
  dmi.chassis.version: ..
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrS1200RP.86B.03.02.0003.070120151022:bd07/01/2015:svnIntelCorporation:pnS1200RP:pvr:rvnIntelCorporation:rnS1200RP:rvrG62254-407:cvn..:ct17:cvr..:
  dmi.product.family: To be filled by O.E.M.
  dmi.product.name: S1200RP
  dmi.product.version: 
  dmi.sys.vendor: Intel Corporation

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1839912

Title:
  test_map in ubuntu_bpf failed with "Allowed update sockmap '0:3' not
  in ESTABLISHED"

Status in ubuntu-kernel-tests:
  New
Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Bionic:
  In Progress

Bug description:
  [Impact]  
   
  test_maps bpf selftests is failing on bionic.

Re: [Kernel-packages] [Bug 1930422] Re: thermald_1.9.1-1ubuntu0.4_amd64 breaks system

2021-06-07 Thread Daniel James Brinton

wow it's running like a fridge! cheers.

On 07/06/2021 03:23, Srinivas Pandruvada wrote:
> Please try this version
> https://github.com/intel/thermal_daemon/tree/ubuntu-bug-1930422
>
> checkout branch ubuntu-bug-1930422.
> Then repeat comments at #11
>

** Attachment added: "branch-output.txt"

https://bugs.launchpad.net/bugs/1930422/+attachment/5502925/+files/branch-output.txt

** Attachment added: "Screenshot from 2021-06-07 11-40-29.png"

https://bugs.launchpad.net/bugs/1930422/+attachment/5502926/+files/Screenshot%20from%202021-06-07%2011-40-29.png

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to thermald in Ubuntu.
https://bugs.launchpad.net/bugs/1930422

Title:
  thermald_1.9.1-1ubuntu0.4_amd64 breaks system

Status in thermald package in Ubuntu:
  New

Bug description:
  cpu runs at 100c fan at 3000rpm when in heavy use previous version was ok
  re: https://bugs.launchpad.net/ubuntu/+source/thermald/+bug/1913186
  lshw -short is:
  H/W path   Device   Class  Description
  ==
  system XPS 8940 (09C5)
  /0  bus0KV3RP
  /0/0memory 64KiB BIOS
  /0/9memory 16GiB System Memory
  /0/9/0  memory 8GiB DIMM DDR4 Synchronous 
32
  /0/9/1  memory 8GiB DIMM DDR4 Synchronous 
32
  /0/9/2  memory Project-Id-Version: 
lshwRepor
  /0/9/3  memory Project-Id-Version: 
lshwRepor
  /0/35   memory 512KiB L1 cache
  /0/36   memory 2MiB L2 cache
  /0/37   memory 16MiB L3 cache
  /0/38   processor  Intel(R) Core(TM) i7-10700 
CP
  /0/100  bridge Intel Corporation
  /0/100/1bridge Xeon E3-1200 v5/E3-1500 
v5/6t
  /0/100/1/0  displayTU106 [GeForce RTX 2060 
Rev. 
  /0/100/1/0.1multimedia TU106 High Definition 
Audio C
  /0/100/1/0.2busTU106 USB 3.1 Host 
Controller
  /0/100/1/0.2/0 usb3 busxHCI Host Controller
  /0/100/1/0.2/1 usb4 busxHCI Host Controller
  /0/100/1/0.3busTU106 USB Type-C UCSI 
Control
  /0/100/2displayIntel Corporation
  /0/100/4genericXeon E3-1200 v5/E3-1500 
v5/6t
  /0/100/8genericXeon E3-1200 v5/v6 / 
E3-1500 
  /0/100/12   genericComet Lake PCH Thermal 
Contro
  /0/100/14   busComet Lake USB 3.1 xHCI 
Host 
  /0/100/14/0usb1 busxHCI Host Controller
  /0/100/14/0/4  enx0c5b8f279a64  communication  HUAWEI_MOBILE
  /0/100/14/0/5   input  Dell MS116 USB Optical 
Mouse
  /0/100/14/0/6   input  Dell KB216 Wired Keyboard
  /0/100/14/0/b   genericUSB2.0-CRW
  /0/100/14/0/c   genericUB91C
  /0/100/14/0/e   communication  Bluetooth wireless 
interface
  /0/100/14/1usb2 busxHCI Host Controller
  /0/100/14.2 memory RAM memory
  /0/100/14.3wlo1 networkWi-Fi 6 AX201
  /0/100/15   busComet Lake PCH Serial IO 
I2C 
  /0/100/16   communication  Comet Lake HECI Controller
  /0/100/17   storageIntel Corporation
  /0/100/1b   bridge Comet Lake PCI Express 
Root P
  /0/100/1b/0 storageSamsung Electronics Co Ltd
  /0/100/1b/0/0  /dev/nvme0   storagePM991 NVMe Samsung 512GB
  /0/100/1b/0/0/1/dev/nvme0n1 disk   512GB NVMe namespace
  /0/100/1b/0/0/1/1   volume 149MiB Windows FAT volume
  /0/100/1b/0/0/1/2  /dev/nvme0n1p2   volume 127MiB reserved partition
  /0/100/1b/0/0/1/3  /dev/nvme0n1p3   volume 214GiB Windows NTFS volume
  /0/100/1b/0/0/1/4  /dev/nvme0n1p4   volume 989MiB Windows NTFS volume
  /0/100/1b/0/0/1/5  /dev/nvme0n1p5   volume 16GiB Windows NTFS volume
  /0/100/1b/0/0/1/6  /dev/nvme0n1p6   volume 1417MiB Windows NTFS volume
  /0/100/1b/0/0/1/7  /dev/nvme0n1p7   volume 243GiB EXT4 volume
  /0/100/1c   bridge Intel Corporation
  /0/100/1c/0enp3s0

[Kernel-packages] [Bug 1930733] Re: Kernel oops with the 460.80 and 465.27 drivers when using DP, but not with HDMI

2021-06-07 Thread Alberto Milone

** Changed in: nvidia-graphics-drivers-460 (Ubuntu)
   Status: Confirmed => Triaged

** Changed in: nvidia-graphics-drivers-465 (Ubuntu)
   Status: Confirmed => Triaged

** Changed in: nvidia-graphics-drivers-460 (Ubuntu)
   Importance: Undecided => High

** Changed in: nvidia-graphics-drivers-465 (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to nvidia-graphics-drivers-460 in Ubuntu.
https://bugs.launchpad.net/bugs/1930733

Title:
  Kernel oops with the 460.80 and 465.27 drivers when using DP, but not
  with HDMI

Status in nvidia-graphics-drivers-460 package in Ubuntu:
  Triaged
Status in nvidia-graphics-drivers-465 package in Ubuntu:
  Triaged

Bug description:
  I get a kernel oops with the 460.80 and 465.27 drivers on Hirsute

  Jun 03 16:26:57 willow kernel: Oops:  [#1] SMP PTI
  Jun 03 16:26:57 willow kernel: CPU: 7 PID: 2004 Comm: Xorg Tainted: P 
  OE 5.11.0-18-generic #19-Ubuntu
  Jun 03 16:26:57 willow kernel: Hardware name: System manufacturer System 
Product Name/PRIME H270M-PLUS, BIOS 1605 12/13/2019
  Jun 03 16:26:57 willow kernel: RIP: 0010:_nv015534rm+0x1b6/0x330 [nvidia]
  Jun 03 16:26:57 willow kernel: Code: 8b 87 68 05 00 00 ba 01 00 00 00 be 02 
00 00 00 e8 bf eb 55 c8 41 83 c5 01 41 83 fd 1f 0f 84 0b 01 00 00 48 8b 45 10 
44 89 ee <48> 8b b8 70 01 00 00 48 8b 87 d8 04 00 00 e8>
  Jun 03 16:26:57 willow kernel: RSP: :af4201893958 EFLAGS: 00010297
  Jun 03 16:26:57 willow kernel: RAX:  RBX: 0400 
RCX: 0003
  Jun 03 16:26:57 willow kernel: RDX: 0004 RSI: 0003 
RDI: 
  Jun 03 16:26:57 willow kernel: RBP: 8e318220add0 R08: 0001 
R09: 8e318220acb8
  Jun 03 16:26:57 willow kernel: R10: 8e3182204008 R11: 1010 
R12: 0400
  Jun 03 16:26:57 willow kernel: R13: 0003 R14: 8e3186ca8010 
R15: 0800
  Jun 03 16:26:57 willow kernel: FS:  7f5807f38a40() 
GS:8e3466dc() knlGS:
  Jun 03 16:26:57 willow kernel: CS:  0010 DS:  ES:  CR0: 
80050033
  Jun 03 16:26:57 willow kernel: CR2: 0170 CR3: 000140710005 
CR4: 003706e0
  Jun 03 16:26:57 willow kernel: DR0:  DR1:  
DR2: 
  Jun 03 16:26:57 willow kernel: DR3:  DR6: fffe0ff0 
DR7: 0400
  Jun 03 16:26:57 willow kernel: Call Trace:
  Jun 03 16:26:57 willow kernel:  ? _nv015556rm+0x7fd/0x1020 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv027155rm+0x22c/0x4f0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv017787rm+0x303/0x5e0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv017789rm+0xe1/0x220 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv022829rm+0xed/0x220 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv023065rm+0x30/0x60 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv000704rm+0x16da/0x22b0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? rm_init_adapter+0xc5/0xe0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? nv_open_device+0x122/0x8e0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? nvidia_open+0x2b7/0x560 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? nvidia_frontend_open+0x58/0xa0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? chrdev_open+0xf7/0x220
  Jun 03 16:26:57 willow kernel:  ? cdev_device_add+0x90/0x90
  Jun 03 16:26:57 willow kernel:  ? do_dentry_open+0x156/0x370
  Jun 03 16:26:57 willow kernel:  ? vfs_open+0x2d/0x30
  Jun 03 16:26:57 willow kernel:  ? do_open+0x1c3/0x340
  Jun 03 16:26:57 willow kernel:  ? path_openat+0x10a/0x1d0
  Jun 03 16:26:57 willow kernel:  ? do_filp_open+0x8c/0x130
  Jun 03 16:26:57 willow kernel:  ? __check_object_size+0x1c/0x20
  Jun 03 16:26:57 willow kernel:  ? do_sys_openat2+0x9b/0x150
  Jun 03 16:26:57 willow kernel:  ? __x64_sys_openat+0x56/0x90
  Jun 03 16:26:57 willow kernel:  ? do_syscall_64+0x38/0x90
  Jun 03 16:26:57 willow kernel:  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
  Jun 03 16:26:57 willow kernel: Modules linked in: snd_seq_dummy snd_hrtimer 
vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) binfmt_misc zfs(PO) zunicode(PO) 
zzstd(O) zlua(O) zavl(PO) icp(PO) zcommon(PO) znvpair(PO) >
  Jun 03 16:26:57 willow kernel:  sunrpc ip_tables x_tables autofs4 btrfs 
blake2b_generic xor raid6_pq libcrc32c hid_generic usbhid hid crct10dif_pclmul 
crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd c>
  Jun 03 16:26:57 willow kernel: CR2: 0170
  Jun 03 16:26:57 willow kernel: ---[ end trace 0013b6989b267f32 ]---
  Jun 03 16:26:57 willow kernel: RIP: 0010:_nv015534rm+0x1b6/0x330 [nvidia]
  Jun 03 16:26:57 willow kernel: Code: 8b 87 68 05 00 00 ba 01 00 00 00 be 02 
00 00 00 e8 bf eb 55 c8 41 83 c5 01 41 83 fd 1f 0f 84 0b 01 00 00 48 8b 45 10 
44 89 ee <48> 8b b8 70 01 00 00 48 8b 87 d8 04 00 00 e8>
  Jun 03 16:26:57 willow kernel: RSP: :af4201893958 EFLAGS: 00010297

[Kernel-packages] [Bug 1926030] Re: IR Remote Keys Repeat Many Times Starting with Kernel 5.8.0-49

2021-06-07 Thread Po-Hsu Lin

** No longer affects: focal (Ubuntu)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1926030

Title:
  IR Remote Keys Repeat Many Times Starting with Kernel 5.8.0-49

Status in linux package in Ubuntu:
  Fix Released
Status in linux source package in Groovy:
  Fix Committed

Bug description:
  [Impact]
  Patch:
* media: rc: fix timeout handling after switch to microsecond durations
* media: rc: ite-cir: fix min_timeout calculation

  Were applied to Groovy with our stable update process (bug 1918516)

  User reported that IR Remote key press will be repeated for multiple times
  with these patches applied.

  Commit 528222d853f92 ("media: rc: harmonize infrared durations to
  microseconds") that needs to be fixed by these two does not exist in
  5.8 kernel. The patch author Matthias Reichl also state these are for
  5.10 and onward.

  [Fix]
  Revert these two patches for groovy.

  [Test]
  Test kernels for G-5.8 / F-5.8 can be found here:
  https://people.canonical.com/~phlin/kernel/lp-1926030-revert-for-ir/

  User Ted L confirmed that F-5.8 test kernel can fix the problem.

  [Where problems could occur]
  The chance to cause regression can be considered as low since the original 
patch that need to be fix by these two patches does not exist in 5.8 at all. 

  
  [Original Bug Report]
  I use an IR remote with the ir-keytable package.  Everything was working fine 
until kernel 5.8.0-49 was automatically installed by Software Updater on Ubuntu 
20.04.2.  When any key is pressed on the remote, the key is repeated about 500 
times.  The kernel is now 5.8.0-50, and the problem persists.

  Other users on the MythTV mailing list are reporting the issue, and it
  appears that the problem is related to changes in the following files:

  drivers/media/rc/ir-mce_kbd-decoder.c
  drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
  drivers/media/rc/serial_ir.c

  It has been reported that reverting the ir-mce_kbd-decoder.c and rc-
  main.c files to the older versions fixes the problem.

  /proc/version_signature > version.log:
  Ubuntu 5.8.0-50.56~20.04.1-generic 5.8.18

  lspci -vnvn:
  00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core 
Processor Host Bridge/DRAM Registers [8086:590f] (rev 06)
   Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v6/7th Gen Core Processor Host 
Bridge/DRAM Registers [1043:8694]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 
   Kernel driver in use: skl_uncore

  ir-keytable -V:
  IR keytable control version 1.18.0

  lsb_release -rd:
  Description:  Ubuntu 20.04.2 LTS
  Release:  20.04
  ---
  ProblemType: Bug
  ApportVersion: 2.20.11-0ubuntu27.16
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ted1020 F pulseaudio
  CasperMD5CheckResult: skip
  CurrentDesktop: ubuntu:GNOME
  DistroRelease: Ubuntu 20.04
  InstallationDate: Installed on 2020-09-19 (217 days ago)
  InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731)
  IwConfig:
   lono wireless extensions.

   enp3s0no wireless extensions.

   enp0s31f6  no wireless extensions.
  MachineType: System manufacturer System Product Name
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 i915drmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.8.0-50-generic 
root=UUID=529cae8e-19cd-4732-80d5-b3dca123afc6 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 5.8.0-50.56~20.04.1-generic 5.8.18
  RelatedPackageVersions:
   linux-restricted-modules-5.8.0-50-generic N/A
   linux-backports-modules-5.8.0-50-generic  N/A
   linux-firmware1.187.11
  RfKill:

  Tags:  focal
  Uname: Linux 5.8.0-50-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin lxd mythtv plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 07/05/2017
  dmi.bios.release: 5.12
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 3405
  dmi.board.asset.tag: Default string
  dmi.board.name: H110T
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: Rev X.0x
  dmi.chassis.asset.tag: Default string
  dmi.chassis.type: 3
  dmi.chassis.vendor: Default string
  dmi.chassis.version: Default string
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr3405:bd07/05/2017:br5.12:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH110T:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring:
  dmi.product.family: To be filled by O.E.M.
  dmi.product.name: System Product Name
  dmi.product.sku: SKU
  dmi.product.version: System Version
  dmi.sys.vend

[Kernel-packages] [Bug 1931105] [NEW] Sleep issue on ubuntu 21.04, CPU AMD 5700u

You have been subscribed to a public bug:

System Info
Dell Inspiron 5515
Operating System: Kubuntu 21.04
Kernel Version: 5.12.9-051209-generic
OS Type: 64-bit
Processors: 16 × AMD Ryzen 7 5700U with Radeon Graphics
Memory: 15,1 GiB of RAM
Graphics Processor: AMD RENOIR

If I suspend my pc, the screen, fans and keyboard backlight turn off.
However if I try to wake up from suspension the screen stays black,
while the keyboard backlight starts blinking. The only way to unlock it
is to click the power button, and the pc will automatically restart
(thus losing the data of the active session).

Initially I had the 5.11 kernel, then to see if the problem was solved I
tried to install the 5.12 kernel and the 5.12.9 kernel, but there were
no improvements.

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: hirsute
-- 
Sleep issue on ubuntu 21.04, CPU AMD 5700u
https://bugs.launchpad.net/bugs/1931105
You received this bug notification because you are a member of Kernel Packages, 
which is subscribed to linux in Ubuntu.

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1931106] [NEW] bnxt_en NIC driver crashes IO_PAGE_FAULT

2021-06-07 Thread aft2d

Public bug reported:

Hi all,

We received a bunch of new servers with a Supermicro H12SSL-NT mainboard
that has an embedded Broadcom BCM57416 NIC.

On all those servers we observe crashes of the NIC driver (bnxt_en) from
time to time. We're not able to manually reproduce this issue, it just
occurs at some point. Also our monitoring does not show any
irregularities(high traffic flow or sth. like this).

Syslog: https://pastebin.com/yDAyjHvF

All servers are running with up-to-date packages:
$ lsb_release -rd
Description: Ubuntu 20.04.2 LTS
Release: 20.04
$ uname -r
5.4.0-73-generic 

It also happens on older kernel versions (tested 5.4.0-66) as well as
the HWE kernel (tested 5.8.0-55).


Thanks in advance.
~ Roman

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1931106

Title:
  bnxt_en NIC driver crashes IO_PAGE_FAULT

Status in linux package in Ubuntu:
  New

Bug description:
  Hi all,

  We received a bunch of new servers with a Supermicro H12SSL-NT
  mainboard that has an embedded Broadcom BCM57416 NIC.

  On all those servers we observe crashes of the NIC driver (bnxt_en)
  from time to time. We're not able to manually reproduce this issue, it
  just occurs at some point. Also our monitoring does not show any
  irregularities(high traffic flow or sth. like this).

  Syslog: https://pastebin.com/yDAyjHvF

  All servers are running with up-to-date packages:
  $ lsb_release -rd
  Description: Ubuntu 20.04.2 LTS
  Release: 20.04
  $ uname -r
  5.4.0-73-generic 

  It also happens on older kernel versions (tested 5.4.0-66) as well as
  the HWE kernel (tested 5.8.0-55).

  
  Thanks in advance.
  ~ Roman

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931106/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1931106] Re: bnxt_en NIC driver crashes IO_PAGE_FAULT

2021-06-07 Thread aft2d

** Attachment added: "apport.linux-image-5.8.0-55-generic.cime34c6.apport"

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931106/+attachment/5502930/+files/apport.linux-image-5.8.0-55-generic.cime34c6.apport

--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1931106

Title:
bnxt_en NIC driver crashes IO_PAGE_FAULT

Status in linux package in Ubuntu:
New

Bug description:
Hi all,

We received a bunch of new servers with a Supermicro H12SSL-NT
mainboard that has an embedded Broadcom BCM57416 NIC.

On all those servers we observe crashes of the NIC driver (bnxt_en)
from time to time. We're not able to manually reproduce this issue, it
just occurs at some point. Also our monitoring does not show any
irregularities(high traffic flow or sth. like this).

Syslog: https://pastebin.com/yDAyjHvF

All servers are running with up-to-date packages:
$ lsb_release -rd
Description: Ubuntu 20.04.2 LTS
Release: 20.04
$ uname -r
5.4.0-73-generic

It also happens on older kernel versions (tested 5.4.0-66) as well as
the HWE kernel (tested 5.8.0-55).

Thanks in advance.
~ Roman

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931106/+subscriptions

--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1931105] Re: Sleep issue on ubuntu 21.04, CPU AMD 5700u

2021-06-07 Thread Paul White

** Tags added: hirsute

** Package changed: ubuntu => linux (Ubuntu)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1931105

Title:
  Sleep issue on ubuntu 21.04, CPU AMD 5700u

Status in linux package in Ubuntu:
  New

Bug description:
  System Info
  Dell Inspiron 5515
  Operating System: Kubuntu 21.04
  Kernel Version: 5.12.9-051209-generic
  OS Type: 64-bit
  Processors: 16 × AMD Ryzen 7 5700U with Radeon Graphics
  Memory: 15,1 GiB of RAM
  Graphics Processor: AMD RENOIR

  If I suspend my pc, the screen, fans and keyboard backlight turn off.
  However if I try to wake up from suspension the screen stays black,
  while the keyboard backlight starts blinking. The only way to unlock
  it is to click the power button, and the pc will automatically restart
  (thus losing the data of the active session).

  Initially I had the 5.11 kernel, then to see if the problem was solved
  I tried to install the 5.12 kernel and the 5.12.9 kernel, but there
  were no improvements.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931105/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1931001] Re: kernel: watchdog: BUG: soft lockup - CPU#3 stuck for 22s!

2021-06-07 Thread Thadeu Lima de Souza Cascardo

Hi, vcarceler.

Can you give complete dmesg from when this happens?

Thanks for you report.
Cascardo.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1931001

Title:
  kernel: watchdog: BUG: soft lockup - CPU#3 stuck for 22s!

Status in linux package in Ubuntu:
  New

Bug description:
  Ubuntu 20.04 LTS and Ubuntu 21.04 occasionally boots with very bad
  performance and very unresponsive to user input on Lenovo laptop
  Lenovo 300e 2nd Gen 81M9 (LENOVO_MT_81M9_BU_idea_FM_300e 2nd G).

  When this happens you can read this kind of messages on journal:

  ---
  root@alumne-1-58:~# journalctl | grep "BUG: soft"
  may 20 21:44:35 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 22s! [swapper/3:0]
  may 20 21:44:35 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 22s! [swapper/3:0]
  may 22 09:33:34 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#0 stuck 
for 22s! [swapper/0:0]
  may 24 16:45:14 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#1 stuck 
for 23s! [prometheus-node:4220]
  may 24 16:45:14 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#0 stuck 
for 23s! [swapper/0:0]
  jun 03 00:01:09 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#0 stuck 
for 22s! [swapper/0:0]
  jun 03 00:01:09 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#0 stuck 
for 23s! [swapper/0:0]
  jun 03 00:01:09 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#1 stuck 
for 22s! [swapper/1:0]
  jun 03 00:01:09 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#0 stuck 
for 22s! [swapper/0:0]
  jun 03 00:02:15 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#0 stuck 
for 21s! [swapper/0:0]
  jun 05 08:22:58 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 22s! [irq/138-iwlwifi:1044]
  jun 05 08:25:06 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#2 stuck 
for 22s! [swapper/2:0]
  jun 05 08:25:06 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 22s! [irq/138-iwlwifi:1044]
  jun 05 08:26:42 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#1 stuck 
for 23s! [lxd:3975]
  jun 05 08:26:42 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#2 stuck 
for 23s! [swapper/2:0]
  jun 05 08:26:42 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 23s! [irq/138-iwlwifi:1044]
  jun 05 08:27:38 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 23s! [irq/138-iwlwifi:1044]
  jun 05 08:28:34 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 22s! [irq/138-iwlwifi:1044]
  jun 05 08:29:46 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 22s! [irq/138-iwlwifi:1044]
  root@alumne-1-58:~#
  ---

  Usually if you reboot everything works fine but it's very annoying
  when happens.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931001/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

Re: [Kernel-packages] [Bug 1930422] Re: thermald_1.9.1-1ubuntu0.4_amd64 breaks system

2021-06-07 Thread Daniel James Brinton

longer run. thanks for your help. without people like you we'd all be 
using Windows!

On 07/06/2021 03:23, Srinivas Pandruvada wrote:
> Please try this version
> https://github.com/intel/thermal_daemon/tree/ubuntu-bug-1930422
>
> checkout branch ubuntu-bug-1930422.
> Then repeat comments at #11
>

** Attachment added: "branch-journalctl.txt"

https://bugs.launchpad.net/bugs/1930422/+attachment/5502932/+files/branch-journalctl.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to thermald in Ubuntu.
https://bugs.launchpad.net/bugs/1930422

Title:
  thermald_1.9.1-1ubuntu0.4_amd64 breaks system

Status in thermald package in Ubuntu:
  New

Bug description:
  cpu runs at 100c fan at 3000rpm when in heavy use previous version was ok
  re: https://bugs.launchpad.net/ubuntu/+source/thermald/+bug/1913186
  lshw -short is:
  H/W path   Device   Class  Description
  ==
  system XPS 8940 (09C5)
  /0  bus0KV3RP
  /0/0memory 64KiB BIOS
  /0/9memory 16GiB System Memory
  /0/9/0  memory 8GiB DIMM DDR4 Synchronous 
32
  /0/9/1  memory 8GiB DIMM DDR4 Synchronous 
32
  /0/9/2  memory Project-Id-Version: 
lshwRepor
  /0/9/3  memory Project-Id-Version: 
lshwRepor
  /0/35   memory 512KiB L1 cache
  /0/36   memory 2MiB L2 cache
  /0/37   memory 16MiB L3 cache
  /0/38   processor  Intel(R) Core(TM) i7-10700 
CP
  /0/100  bridge Intel Corporation
  /0/100/1bridge Xeon E3-1200 v5/E3-1500 
v5/6t
  /0/100/1/0  displayTU106 [GeForce RTX 2060 
Rev. 
  /0/100/1/0.1multimedia TU106 High Definition 
Audio C
  /0/100/1/0.2busTU106 USB 3.1 Host 
Controller
  /0/100/1/0.2/0 usb3 busxHCI Host Controller
  /0/100/1/0.2/1 usb4 busxHCI Host Controller
  /0/100/1/0.3busTU106 USB Type-C UCSI 
Control
  /0/100/2displayIntel Corporation
  /0/100/4genericXeon E3-1200 v5/E3-1500 
v5/6t
  /0/100/8genericXeon E3-1200 v5/v6 / 
E3-1500 
  /0/100/12   genericComet Lake PCH Thermal 
Contro
  /0/100/14   busComet Lake USB 3.1 xHCI 
Host 
  /0/100/14/0usb1 busxHCI Host Controller
  /0/100/14/0/4  enx0c5b8f279a64  communication  HUAWEI_MOBILE
  /0/100/14/0/5   input  Dell MS116 USB Optical 
Mouse
  /0/100/14/0/6   input  Dell KB216 Wired Keyboard
  /0/100/14/0/b   genericUSB2.0-CRW
  /0/100/14/0/c   genericUB91C
  /0/100/14/0/e   communication  Bluetooth wireless 
interface
  /0/100/14/1usb2 busxHCI Host Controller
  /0/100/14.2 memory RAM memory
  /0/100/14.3wlo1 networkWi-Fi 6 AX201
  /0/100/15   busComet Lake PCH Serial IO 
I2C 
  /0/100/16   communication  Comet Lake HECI Controller
  /0/100/17   storageIntel Corporation
  /0/100/1b   bridge Comet Lake PCI Express 
Root P
  /0/100/1b/0 storageSamsung Electronics Co Ltd
  /0/100/1b/0/0  /dev/nvme0   storagePM991 NVMe Samsung 512GB
  /0/100/1b/0/0/1/dev/nvme0n1 disk   512GB NVMe namespace
  /0/100/1b/0/0/1/1   volume 149MiB Windows FAT volume
  /0/100/1b/0/0/1/2  /dev/nvme0n1p2   volume 127MiB reserved partition
  /0/100/1b/0/0/1/3  /dev/nvme0n1p3   volume 214GiB Windows NTFS volume
  /0/100/1b/0/0/1/4  /dev/nvme0n1p4   volume 989MiB Windows NTFS volume
  /0/100/1b/0/0/1/5  /dev/nvme0n1p5   volume 16GiB Windows NTFS volume
  /0/100/1b/0/0/1/6  /dev/nvme0n1p6   volume 1417MiB Windows NTFS volume
  /0/100/1b/0/0/1/7  /dev/nvme0n1p7   volume 243GiB EXT4 volume
  /0/100/1c   bridge Intel Corporation
  /0/100/1c/0enp3s0   networkRealtek Semiconductor Co., 
Lt
  /0/100/1f   bridge Intel Corporation

[Kernel-packages] [Bug 1215411] Re: libcpupower.so is not installed from linux-tools

2021-06-07 Thread Christian Ehrhardt 

Yeah Dmitry, thanks for reminding everyone about it.

But TBH I have not had the feeling that the feeling that the kernel team
(which needs to do it) had started working/thinking on this case.

@Kernel Team - ping is this on your radar at all or did it fall through
the cracks?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1215411

Title:
  libcpupower.so is not installed from linux-tools

Status in cpufreqd package in Ubuntu:
  Confirmed
Status in gkrellm2-cpufreq package in Ubuntu:
  Confirmed
Status in linux package in Ubuntu:
  In Progress

Bug description:
  The patch for bug 1158668 installs cpupower_$(abi_version) command-
  line tool as well as libcpupower.so.$(abi_version).

  This isn't particularly suitable for projects that previously used
  libcpufreq and intend to migrate to libcpupower, because the
  libcpupower.so symlink is no longer installed. The command-line tools
  can also have symlinks (e.g. cpupower -> cpupower_$(abi_version)).

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cpufreqd/+bug/1215411/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1930921] Re: Apache 2.4.41 corrupts files from samba share

2021-06-07 Thread Robie Basak

Thank you for taking the time to report this bug and helping to make
Ubuntu better.

I'll leave any security assessment and security-based prioritisation for
the security team.

>From a non-security perspective, I think this is of low priority since
it only affects an unusual end-user configuration that is likely to
affect only a very small minority of users. Feel free to continue to use
this bug to track the problem, but I do not expect anyone else to spend
time looking into this soon.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1930921

Title:
  Apache 2.4.41 corrupts files from samba share

Status in apache2 package in Ubuntu:
  New
Status in linux package in Ubuntu:
  New
Status in samba package in Ubuntu:
  New

Bug description:
  Wenn I serve a samba share with apache 2.4.41 on Ubuntu 20.04 then
  some files have a corrupt header during transmission. It seems that
  the first few bytes of the headers are truncated and sometimes other
  bytes of the download are not belonging to the file.

  A workaround I found that works is to set "EnableMMAP Off" in the
  apache config.

  See other bug reports like this:

  
https://serverfault.com/questions/1044724/apache2-sends-corrupt-responses-when-using-a-cifs-share
  https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900821

  This is most probably not a bug in Ubuntu itself but I am reporting it
  here since I assume that a data corruption bug is seen as critical.

  I am also marking it as a security vulnerability since it seems that wrong 
parts of memory get exposed during file download. I don't know how random the 
exposed memory is and if it potentially could expose e.g. secrets.
  Please feel free to remove the security vulnerability flag if your assessment 
leads to a different conclusion.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apache2/+bug/1930921/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1930923] Re: Miscelaneou kernel freeze after connecting USB-C dock

2021-06-07 Thread Matyáš Novák

Disabling CPU C-states in bios seems to solve this issue (however, this
solution has an impact on the battery life).

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1930923

Title:
  Miscelaneou kernel freeze after connecting USB-C dock

Status in linux package in Ubuntu:
  New

Bug description:
  If the notebook (DELL 5590) is connected to USB-C dock I-Tec Metal Nano 
  https://i-tec.pro/en/produkt/c31nanodocklanpd-2/
  occasionally (in few hours) the kernel locks itself and hard reset have to be 
done.
  There are then usually errors in "journalctl" (after some occurences, nothing 
is logged, but it is probably due to incompleteness of the writed logs). During 
each freeze more errors are logged 
  and the error differ, so I append complete logged errors from two cases (I 
can post more "cases", if it will help).

  Both memcheck and smart says no error, and without the dock the
  notebook works fine.

  ProblemType: Bug
  DistroRelease: Ubuntu 21.04
  Package: linux-image-5.11.0-18-generic 5.11.0-18.19
  ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17
  Uname: Linux 5.11.0-18-generic x86_64
  NonfreeKernelModules: wl
  ApportVersion: 2.20.11-0ubuntu65.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  logik  2404 F pulseaudio
  CasperMD5CheckResult: unknown
  CurrentDesktop: X-Cinnamon
  Date: Fri Jun  4 21:01:08 2021
  HibernationDevice: RESUME=UUID=5f7825a4-cd50-4645-9ff6-32de3bdf9b1f
  InstallationDate: Installed on 2017-01-06 (1610 days ago)
  InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 
(20160719)
  MachineType: Dell Inc. Latitude 5590
  ProcFB: 0 i915drmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-18-generic 
root=UUID=be75c71c-97f3-406f-9310-e1bf1252c62a ro quiet splash 
resume=uuid=5f7825a4-cd50-4645-9ff6-32de3bdf9b1f usbcore.autosuspend=-1 
vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-5.11.0-18-generic N/A
   linux-backports-modules-5.11.0-18-generic  N/A
   linux-firmware 1.197
  SourcePackage: linux
  UpgradeStatus: Upgraded to hirsute on 2021-06-01 (2 days ago)
  WifiSyslog:
   
  dmi.bios.date: 03/05/2021
  dmi.bios.release: 1.16
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 1.16.3
  dmi.board.name: 02N9PD
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A05
  dmi.chassis.type: 10
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvr1.16.3:bd03/05/2021:br1.16:svnDellInc.:pnLatitude5590:pvr:rvnDellInc.:rn02N9PD:rvrA05:cvnDellInc.:ct10:cvr:
  dmi.product.family: Latitude
  dmi.product.name: Latitude 5590
  dmi.product.sku: 0817
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1930923/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1930733] Re: Kernel oops with the 460.80 and 465.27 drivers when using DP, but not with HDMI

2021-06-07 Thread Giles Coochey

Works with DVI-D, but not if DP is connected to a device.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to nvidia-graphics-drivers-460 in Ubuntu.
https://bugs.launchpad.net/bugs/1930733

Title:
  Kernel oops with the 460.80 and 465.27 drivers when using DP, but not
  with HDMI

Status in nvidia-graphics-drivers-460 package in Ubuntu:
  Triaged
Status in nvidia-graphics-drivers-465 package in Ubuntu:
  Triaged

Bug description:
  I get a kernel oops with the 460.80 and 465.27 drivers on Hirsute

  Jun 03 16:26:57 willow kernel: Oops:  [#1] SMP PTI
  Jun 03 16:26:57 willow kernel: CPU: 7 PID: 2004 Comm: Xorg Tainted: P 
  OE 5.11.0-18-generic #19-Ubuntu
  Jun 03 16:26:57 willow kernel: Hardware name: System manufacturer System 
Product Name/PRIME H270M-PLUS, BIOS 1605 12/13/2019
  Jun 03 16:26:57 willow kernel: RIP: 0010:_nv015534rm+0x1b6/0x330 [nvidia]
  Jun 03 16:26:57 willow kernel: Code: 8b 87 68 05 00 00 ba 01 00 00 00 be 02 
00 00 00 e8 bf eb 55 c8 41 83 c5 01 41 83 fd 1f 0f 84 0b 01 00 00 48 8b 45 10 
44 89 ee <48> 8b b8 70 01 00 00 48 8b 87 d8 04 00 00 e8>
  Jun 03 16:26:57 willow kernel: RSP: :af4201893958 EFLAGS: 00010297
  Jun 03 16:26:57 willow kernel: RAX:  RBX: 0400 
RCX: 0003
  Jun 03 16:26:57 willow kernel: RDX: 0004 RSI: 0003 
RDI: 
  Jun 03 16:26:57 willow kernel: RBP: 8e318220add0 R08: 0001 
R09: 8e318220acb8
  Jun 03 16:26:57 willow kernel: R10: 8e3182204008 R11: 1010 
R12: 0400
  Jun 03 16:26:57 willow kernel: R13: 0003 R14: 8e3186ca8010 
R15: 0800
  Jun 03 16:26:57 willow kernel: FS:  7f5807f38a40() 
GS:8e3466dc() knlGS:
  Jun 03 16:26:57 willow kernel: CS:  0010 DS:  ES:  CR0: 
80050033
  Jun 03 16:26:57 willow kernel: CR2: 0170 CR3: 000140710005 
CR4: 003706e0
  Jun 03 16:26:57 willow kernel: DR0:  DR1:  
DR2: 
  Jun 03 16:26:57 willow kernel: DR3:  DR6: fffe0ff0 
DR7: 0400
  Jun 03 16:26:57 willow kernel: Call Trace:
  Jun 03 16:26:57 willow kernel:  ? _nv015556rm+0x7fd/0x1020 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv027155rm+0x22c/0x4f0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv017787rm+0x303/0x5e0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv017789rm+0xe1/0x220 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv022829rm+0xed/0x220 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv023065rm+0x30/0x60 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv000704rm+0x16da/0x22b0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? rm_init_adapter+0xc5/0xe0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? nv_open_device+0x122/0x8e0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? nvidia_open+0x2b7/0x560 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? nvidia_frontend_open+0x58/0xa0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? chrdev_open+0xf7/0x220
  Jun 03 16:26:57 willow kernel:  ? cdev_device_add+0x90/0x90
  Jun 03 16:26:57 willow kernel:  ? do_dentry_open+0x156/0x370
  Jun 03 16:26:57 willow kernel:  ? vfs_open+0x2d/0x30
  Jun 03 16:26:57 willow kernel:  ? do_open+0x1c3/0x340
  Jun 03 16:26:57 willow kernel:  ? path_openat+0x10a/0x1d0
  Jun 03 16:26:57 willow kernel:  ? do_filp_open+0x8c/0x130
  Jun 03 16:26:57 willow kernel:  ? __check_object_size+0x1c/0x20
  Jun 03 16:26:57 willow kernel:  ? do_sys_openat2+0x9b/0x150
  Jun 03 16:26:57 willow kernel:  ? __x64_sys_openat+0x56/0x90
  Jun 03 16:26:57 willow kernel:  ? do_syscall_64+0x38/0x90
  Jun 03 16:26:57 willow kernel:  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
  Jun 03 16:26:57 willow kernel: Modules linked in: snd_seq_dummy snd_hrtimer 
vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) binfmt_misc zfs(PO) zunicode(PO) 
zzstd(O) zlua(O) zavl(PO) icp(PO) zcommon(PO) znvpair(PO) >
  Jun 03 16:26:57 willow kernel:  sunrpc ip_tables x_tables autofs4 btrfs 
blake2b_generic xor raid6_pq libcrc32c hid_generic usbhid hid crct10dif_pclmul 
crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd c>
  Jun 03 16:26:57 willow kernel: CR2: 0170
  Jun 03 16:26:57 willow kernel: ---[ end trace 0013b6989b267f32 ]---
  Jun 03 16:26:57 willow kernel: RIP: 0010:_nv015534rm+0x1b6/0x330 [nvidia]
  Jun 03 16:26:57 willow kernel: Code: 8b 87 68 05 00 00 ba 01 00 00 00 be 02 
00 00 00 e8 bf eb 55 c8 41 83 c5 01 41 83 fd 1f 0f 84 0b 01 00 00 48 8b 45 10 
44 89 ee <48> 8b b8 70 01 00 00 48 8b 87 d8 04 00 00 e8>
  Jun 03 16:26:57 willow kernel: RSP: :af4201893958 EFLAGS: 00010297
  Jun 03 16:26:57 willow kernel: RAX:  RBX: 0400 
RCX: 0003
  Jun 03 16:26:57 willow kernel: RDX: 0004 RSI: 0003 
RDI: 
  Jun 03 16:26:57 willow kernel: RBP: 8e318220add0 R08: 0001 
R09: 8e318

[Kernel-packages] [Bug 1931131] [NEW] Update the 465 and the 460 NVIDIA driver series

2021-06-07 Thread Alberto Milone

Public bug reported:

Update the 465 and the 460 NVIDIA driver series

[Impact]
These releases provide both bug fixes and new features, and we would like to
make sure all of our users have access to these improvements.

See the changelog entry below for a full list of changes and bugs.

[Test Case]
The following development and SRU process was followed:
https://wiki.ubuntu.com/NVidiaUpdates

Certification test suite must pass on a range of hardware:
https://git.launchpad.net/plainbox-provider-sru/tree/units/sru.pxu

The QA team that executed the tests will be in charge of attaching the
artifacts and console output of the appropriate run to the bug. nVidia
maintainers team members will not mark ‘verification-done’ until this
has happened.

[Regression Potential]
In order to mitigate the regression potential, the results of the
aforementioned system level tests are attached to this bug.

[Discussion]

[Changelog]

** Affects: nvidia-settings (Ubuntu)
 Importance: Medium
 Assignee: Alberto Milone (albertomilone)
 Status: Triaged

** Description changed:

  Update the 465 and the 460 NVIDIA driver series
+ 
+ [Impact]
+ These releases provide both bug fixes and new features, and we would like to
+ make sure all of our users have access to these improvements.
+ 
+ See the changelog entry below for a full list of changes and bugs.
+ 
+ [Test Case]
+ The following development and SRU process was followed:
+ https://wiki.ubuntu.com/NVidiaUpdates
+ 
+ Certification test suite must pass on a range of hardware:
+ https://git.launchpad.net/plainbox-provider-sru/tree/units/sru.pxu
+ 
+ The QA team that executed the tests will be in charge of attaching the
+ artifacts and console output of the appropriate run to the bug. nVidia
+ maintainers team members will not mark ‘verification-done’ until this
+ has happened.
+ 
+ [Regression Potential]
+ In order to mitigate the regression potential, the results of the
+ aforementioned system level tests are attached to this bug.
+ 
+ [Discussion]
+ 
+ [Changelog]

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to nvidia-settings in Ubuntu.
https://bugs.launchpad.net/bugs/1931131

Title:
  Update the 465 and the 460 NVIDIA driver series

Status in nvidia-settings package in Ubuntu:
  Triaged

Bug description:
  Update the 465 and the 460 NVIDIA driver series

  [Impact]
  These releases provide both bug fixes and new features, and we would like to
  make sure all of our users have access to these improvements.

  See the changelog entry below for a full list of changes and bugs.

  [Test Case]
  The following development and SRU process was followed:
  https://wiki.ubuntu.com/NVidiaUpdates

  Certification test suite must pass on a range of hardware:
  https://git.launchpad.net/plainbox-provider-sru/tree/units/sru.pxu

  The QA team that executed the tests will be in charge of attaching the
  artifacts and console output of the appropriate run to the bug. nVidia
  maintainers team members will not mark ‘verification-done’ until this
  has happened.

  [Regression Potential]
  In order to mitigate the regression potential, the results of the
  aforementioned system level tests are attached to this bug.

  [Discussion]

  [Changelog]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-settings/+bug/1931131/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1931129] [NEW] v5.13 net bpf selftests fail with older clang toolchains

2021-06-07 Thread Dimitri John Ledkov

Public bug reported:

selftests/bpf: add ifdefs in tests for required Clang versions

This codifies the clang version requirements from README.rst in the
code, such that only expected working test cases are compiled for the
expected clang version combinations. This insures that most tests are
still executed, even when one doesn't have access to the latest clang
toolchain.

Also see internal v5.13 test results.

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1931129

Title:
  v5.13 net bpf selftests fail with older clang toolchains

Status in linux package in Ubuntu:
  New

Bug description:
  selftests/bpf: add ifdefs in tests for required Clang versions

  This codifies the clang version requirements from README.rst in the
  code, such that only expected working test cases are compiled for the
  expected clang version combinations. This insures that most tests are
  still executed, even when one doesn't have access to the latest clang
  toolchain.

  Also see internal v5.13 test results.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931129/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1930188] Re: Acer Aspire 5 sound driver issues

2021-06-07 Thread Bijay Shah

I just tested with the latest custom kernel shared here and with this
updated pulseaudio package and can confirm speakers and headphones have
separate volume now.

Thanks a lot again, I guess all of the major 3 initially mentioned and 1
extra issues are solved now and hope the 3 ucm realted very minor issues
will be refined in future.

So, now only thing remaining is to get these fixes in official ubuntu
kernel and pulseaudio package I guess, also I am not sure if it's safe
to keep using the custom kernel/pulseaudio driver or wait till it
arrives officially and meanwhile keep using temp fix for now.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1930188

Title:
  Acer Aspire 5 sound driver issues

Status in linux package in Ubuntu:
  New

Bug description:
  Hello,

  There seems to be lots of issues in sound driver for Acer Aspire
  A515-56-57XR with ALC255. I will list all of them below and what I
  have tried so far.

  1. Headphones appears always plugged in even if they are physically not
  2. When actually plugging in headset/earphones it does not auto switch from 
speakers/internal mic to headphones/headset microphone automatically and vice 
versa, have to manually switch everytime.
  3. External headset/earphones microphone won't work at all

  After, logs of trial and error I have found a temporary fix. This
  seems to use legacy intel drivers which solves all 3 issues mentioned
  above but the internal/dmic mic is completely gone (which seems
  intentional when using this). Both depreciated dmic_detect and
  dsp_driver works, I have been using dsp_driver for now as I need
  external microphone at any cost.

  End of /etc/modprobe.d/alsa-base.conf
  # Headset mic fix
  options snd-hda-intel dmic_detect=0 / options snd-intel-dspcfg dsp_driver=1
  options snd-hda-intel model=alc255-acer

  In another thread similar to this I got some support and at least
  fixed the external microphone without using the alsa-base.conf change
  in custom modified kernel. I will attach it here. Now, hoping to fix
  other issues as well slowly like making headphones unplugged when
  physically removing as well as auto switching like the legacy driver
  one.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1930188/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1931129] Re: v5.13 net bpf selftests fail with older clang toolchains

2021-06-07 Thread Dimitri John Ledkov

** Patch added: 
"0001-selftests-bpf-add-ifdefs-in-tests-for-required-Clang.patch"
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931129/+attachment/5502940/+files/0001-selftests-bpf-add-ifdefs-in-tests-for-required-Clang.patch

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1931129

Title:
  v5.13 net bpf selftests fail with older clang toolchains

Status in linux package in Ubuntu:
  New

Bug description:
  selftests/bpf: add ifdefs in tests for required Clang versions

  This codifies the clang version requirements from README.rst in the
  code, such that only expected working test cases are compiled for the
  expected clang version combinations. This insures that most tests are
  still executed, even when one doesn't have access to the latest clang
  toolchain.

  Also see internal v5.13 test results.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931129/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1929147] Re: fix system hang with 5.10 kernel + RX540 on RKL platform

2021-06-07 Thread Łukasz Zemczak

How did the packages get tested? What package versions have been
verified? Please follow the SRU guidelines before switching the tags to
verification-done*. Switching back to unverified.

** Tags removed: verification-done-focal verification-done-hirsute
** Tags added: verification-needed-focal verification-needed-hirsute

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-firmware in Ubuntu.
https://bugs.launchpad.net/bugs/1929147

Title:
  fix system hang with 5.10 kernel + RX540 on RKL platform

Status in HWE Next:
  New
Status in linux-firmware package in Ubuntu:
  Fix Released
Status in linux-firmware source package in Focal:
  Fix Committed
Status in linux-firmware source package in Hirsute:
  Fix Committed

Bug description:
  [Impact]
  On RKL platform with AMD RX540, system would hang during boot-up.

  [Fix]
  AMD introduce a brand new firmware, polaris 12 MC firmware.
  This fix the issue and the system wouldn't hang during boot-up with AMD RX540.

  [Test]
  Verified on RKL platform and AMD RX540
  System would boot-up and login to desktop successfully.

  [Where problems could occur]
  This's a brand new firmware to support Polaris-series,
  it may introduce new issues.

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1929147/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1931106] Re: bnxt_en NIC driver crashes IO_PAGE_FAULT

Please test latest mainline kernel:
https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.13-rc5/amd64/

Headers are not needed.

** Changed in: linux (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1931106

Title:
  bnxt_en NIC driver crashes IO_PAGE_FAULT

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Hi all,

  We received a bunch of new servers with a Supermicro H12SSL-NT
  mainboard that has an embedded Broadcom BCM57416 NIC.

  On all those servers we observe crashes of the NIC driver (bnxt_en)
  from time to time. We're not able to manually reproduce this issue, it
  just occurs at some point. Also our monitoring does not show any
  irregularities(high traffic flow or sth. like this).

  Syslog: https://pastebin.com/yDAyjHvF

  All servers are running with up-to-date packages:
  $ lsb_release -rd
  Description: Ubuntu 20.04.2 LTS
  Release: 20.04
  $ uname -r
  5.4.0-73-generic 

  It also happens on older kernel versions (tested 5.4.0-66) as well as
  the HWE kernel (tested 5.8.0-55).

  
  Thanks in advance.
  ~ Roman

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931106/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1930923] Re: Miscelaneou kernel freeze after connecting USB-C dock

Please test latest drm-tip kernel:
https://kernel.ubuntu.com/~kernel-ppa/mainline/drm-tip/current/

Headers are not needed.

** Changed in: linux (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1930923

Title:
  Miscelaneou kernel freeze after connecting USB-C dock

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  If the notebook (DELL 5590) is connected to USB-C dock I-Tec Metal Nano 
  https://i-tec.pro/en/produkt/c31nanodocklanpd-2/
  occasionally (in few hours) the kernel locks itself and hard reset have to be 
done.
  There are then usually errors in "journalctl" (after some occurences, nothing 
is logged, but it is probably due to incompleteness of the writed logs). During 
each freeze more errors are logged 
  and the error differ, so I append complete logged errors from two cases (I 
can post more "cases", if it will help).

  Both memcheck and smart says no error, and without the dock the
  notebook works fine.

  ProblemType: Bug
  DistroRelease: Ubuntu 21.04
  Package: linux-image-5.11.0-18-generic 5.11.0-18.19
  ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17
  Uname: Linux 5.11.0-18-generic x86_64
  NonfreeKernelModules: wl
  ApportVersion: 2.20.11-0ubuntu65.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  logik  2404 F pulseaudio
  CasperMD5CheckResult: unknown
  CurrentDesktop: X-Cinnamon
  Date: Fri Jun  4 21:01:08 2021
  HibernationDevice: RESUME=UUID=5f7825a4-cd50-4645-9ff6-32de3bdf9b1f
  InstallationDate: Installed on 2017-01-06 (1610 days ago)
  InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 
(20160719)
  MachineType: Dell Inc. Latitude 5590
  ProcFB: 0 i915drmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-18-generic 
root=UUID=be75c71c-97f3-406f-9310-e1bf1252c62a ro quiet splash 
resume=uuid=5f7825a4-cd50-4645-9ff6-32de3bdf9b1f usbcore.autosuspend=-1 
vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-5.11.0-18-generic N/A
   linux-backports-modules-5.11.0-18-generic  N/A
   linux-firmware 1.197
  SourcePackage: linux
  UpgradeStatus: Upgraded to hirsute on 2021-06-01 (2 days ago)
  WifiSyslog:
   
  dmi.bios.date: 03/05/2021
  dmi.bios.release: 1.16
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 1.16.3
  dmi.board.name: 02N9PD
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A05
  dmi.chassis.type: 10
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvr1.16.3:bd03/05/2021:br1.16:svnDellInc.:pnLatitude5590:pvr:rvnDellInc.:rn02N9PD:rvrA05:cvnDellInc.:ct10:cvr:
  dmi.product.family: Latitude
  dmi.product.name: Latitude 5590
  dmi.product.sku: 0817
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1930923/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1927518] Re: Fix kdump failures

This bug was fixed in the package linux-azure - 5.11.0-1006.6+21.10.1

---
linux-azure (5.11.0-1006.6+21.10.1) impish; urgency=medium

  * impish/linux-azure: 5.11.0-1006.6+21.10.1 -proposed tracker (LP:
#1927563)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

 -- Paolo Pisati   Wed, 19 May 2021 12:51:59
+0200

** Changed in: linux-azure (Ubuntu)
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-azure in Ubuntu.
https://bugs.launchpad.net/bugs/1927518

Title:
  Fix kdump failures

Status in linux package in Ubuntu:
  Incomplete
Status in linux-azure package in Ubuntu:
  Fix Released
Status in linux-azure-4.15 package in Ubuntu:
  New
Status in linux source package in Bionic:
  Fix Committed
Status in linux-azure source package in Bionic:
  Invalid
Status in linux-azure-4.15 source package in Bionic:
  Fix Released
Status in linux source package in Focal:
  Fix Committed
Status in linux-azure source package in Focal:
  Fix Released
Status in linux-azure-4.15 source package in Focal:
  Invalid
Status in linux source package in Groovy:
  Fix Committed
Status in linux-azure source package in Groovy:
  Fix Released
Status in linux-azure-4.15 source package in Groovy:
  Invalid
Status in linux source package in Hirsute:
  Fix Committed
Status in linux-azure source package in Hirsute:
  Fix Released
Status in linux-azure-4.15 source package in Hirsute:
  Invalid

Bug description:
  SRU Justification

  [Impact]

  Microsoft relayed a customer report of failures when trying to take a
  kdump.

  These 3 patches fix the issue:
  
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/video/fbdev/hyperv_fb.c?id=aa5b7d11c7cb87c266d705b237368985e7171958
  
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/hv/channel_mgmt.c?id=77db0ec8b7764cb9b09b78066ebfd47b2c0c1909
  
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/hv/channel_mgmt.c?id=8c2d5e0640e53c14b6240e9bf1e32a2226e6e6ca

  Patch #1 solves a problem where the “Unable to send packet via vmbus”
  message is output continuously. But with that problem fixed, the
  second problem can occur where the kdump kernel panics due to
  receiving an unexpected VMbus UNLOAD complete message.

  Patch #2 prevents the UNLOAD complete message from ever occurring in
  the kdump kernel. But if the UNLOAD complete message does occur at
  some unexpected time, Patch #3 prevents it from causing a panic.

  These patches seem worthy of application to all affected master
  kernels.

  [Test Plan]

  Cause a guest kernel to crash and successfully acquire a kdump.

  [Where problems could occur]

  The extended Hyper-V wait while flushing could cause side effects.

  [Other Info]
  SF: #00310145
  https://canonical.lightning.force.com/lightning/r/Case/5004K05pZNNQA2/view

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1927518/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1924997] Re: CirrusLogic: Cracking noises appears in built-in speaker when output volume is set >80%

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1926236] Re: Fix The sound has noise while audio volume is maximum

2021-06-07 Thread Łukasz Zemczak

How did the packages get tested? What package versions have been
verified? Please follow the SRU guidelines before switching the tags to
verification-done*. Switching back to unverified.

** Tags removed: verification-done-focal
** Tags added: verification-needed-focal

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-firmware in Ubuntu.
https://bugs.launchpad.net/bugs/1926236

Title:
  Fix The sound has noise while audio volume is maximum

Status in HWE Next:
  New
Status in linux-firmware package in Ubuntu:
  Fix Released
Status in linux-firmware source package in Focal:
  Fix Committed

Bug description:
  [Impact]
  The sound has noise while turning the audio volume to maximum

  [Fix]
  For VEGA & Polaris, need two patches(landed on mainline kernel) to fix and a 
modprobe
  1.(50ceb1fe7a) drm/amd/pm: bug fix for pcie dpm, has landed on oem kernel.
  2.(9d03730ecb) drm/amd/pm: workaround for audio noise issue, has landed on 
oem kernel
  3. #modprobe amdgpu ppfeaturemask=0xfff7bffb.
  For Navi_1x, need smc firmware to fix.
  1. (4fe6e53b96 linux-firmware) amdgpu: update navi10 SMC firmware
  1. (8ab7abaf63 linux-firmware) amdgpu: update navi14 SMC firmware

  [Test]
  Verified on RKL platform 
  A. with wx3200(Polaris series) and the following configuration

  1. With these two patch,  

  1.1. (50ceb1fe7a) drm/amd/pm: bug fix for pcie dpm, has landed on oem kernel. 
  
  1.2. (9d03730ecb) drm/amd/pm: workaround for audio noise issue, has landed on 
oem kernel

   
  2. doesn't append ppfeaturemask=0xfff7bffb
   

   
  Can't observe issue.  
   

   
  B. With wx5500(Navi series) and update the related firmware,  
  
  Can't observe issue

  [Where problems could occur]
  Because disabling DPM, the power consumption would be slightly higher.

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1926236/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1925415] Re: Enable mute/micmute LEDs and limit mic boost on EliteBook 845 G8

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1923557] Re: CirrusLogic: The default input volume is "0%" on Dell Bullseye

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1928808] Re: Requiring extra device ID for nvidia-driver-460

*** This bug is a duplicate of bug 1925522 ***
https://bugs.launchpad.net/bugs/1925522

This bug was fixed in the package nvidia-graphics-drivers-460 -
460.80-0ubuntu3

---
nvidia-graphics-drivers-460 (460.80-0ubuntu3) impish; urgency=medium

  * debian/dkms_nvidia/patches/buildfix_kernel_5.13.patch,
debian/templates/dkms_nvidia.conf.in:
- Add support for Linux 5.13.

 -- Alberto Milone   Wed, 26 May 2021
17:37:16 +0200

** Changed in: nvidia-graphics-drivers-460 (Ubuntu)
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to nvidia-graphics-drivers-460 in Ubuntu.
https://bugs.launchpad.net/bugs/1928808

Title:
  Requiring extra device ID for nvidia-driver-460

Status in nvidia-graphics-drivers-460 package in Ubuntu:
  Fix Released

Bug description:
  There are some new nvidia graphics could be supported by nvidia-driver-460.
  Here are the list:
  1fb1 (Nvidia T600)
  2231 (Nvidia RTX A5000)
  24b7 (Nvidia RTX A4000 mobile)
  24b8 (Nvidia RTX A3000 mobile)
  25b8 (Nvidia RTX A2000 mobile)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-460/+bug/1928808/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1925241] Re: Disable CONFIG_DELL_SMBIOS_SMM, CONFIG_DELL_UART_BACKLIGHT, CONFIG_I2C_AMD_MP2

This bug was fixed in the package linux-gcp - 5.11.0-1008.8+21.10.1

---
linux-gcp (5.11.0-1008.8+21.10.1) impish; urgency=medium

  * impish/linux-gcp: 5.11.0-1008.8+21.10.1 -proposed tracker (LP:
#1927565)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

 -- Paolo Pisati   Thu, 20 May 2021 13:01:39
+0200

** Changed in: linux-gcp (Ubuntu)
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-gcp in Ubuntu.
https://bugs.launchpad.net/bugs/1925241

Title:
  Disable CONFIG_DELL_SMBIOS_SMM, CONFIG_DELL_UART_BACKLIGHT,
  CONFIG_I2C_AMD_MP2

Status in linux package in Ubuntu:
  Invalid
Status in linux-gcp package in Ubuntu:
  Fix Released
Status in linux-gcp-5.8 package in Ubuntu:
  Invalid
Status in linux source package in Focal:
  Invalid
Status in linux-gcp source package in Focal:
  Invalid
Status in linux-gcp-5.8 source package in Focal:
  In Progress
Status in linux source package in Groovy:
  Invalid
Status in linux-gcp source package in Groovy:
  Fix Released
Status in linux-gcp-5.8 source package in Groovy:
  Invalid
Status in linux source package in Hirsute:
  Invalid
Status in linux-gcp source package in Hirsute:
  Fix Released
Status in linux-gcp-5.8 source package in Hirsute:
  Invalid

Bug description:
  
  SRU Justification:

  Enforcement annotations indicate that these config options should
  never have been set.

  [Impact]

  Disable these options for hardware that does not exist in the Google
  cloud fabric. There should be no impact to existing users.

  [Fix]

  CONFIG_DELL_SMBIOS_SMM=n
  CONFIG_DELL_UART_BACKLIGHT=n
  CONFIG_I2C_AMD_MP2=n

  [Test Plan]

  Boot a GCP instance and ensure there are no new kernel log errors.

  [Where problems could occur]

  Regression potential should be low since this HW does not exists in a
  GCP guest instance.

  [Other Info]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1925241/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1925522] Re: Introduce the 465 driver series, fabric-manager, and libnvidia-nscq

This bug was fixed in the package nvidia-graphics-drivers-460 -
460.80-0ubuntu3

---
nvidia-graphics-drivers-460 (460.80-0ubuntu3) impish; urgency=medium

  * debian/dkms_nvidia/patches/buildfix_kernel_5.13.patch,
debian/templates/dkms_nvidia.conf.in:
- Add support for Linux 5.13.

 -- Alberto Milone   Wed, 26 May 2021
17:37:16 +0200

** Changed in: nvidia-graphics-drivers-460 (Ubuntu)
   Status: In Progress => Fix Released

** Changed in: nvidia-graphics-drivers-450-server (Ubuntu)
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to nvidia-graphics-drivers-460 in Ubuntu.
https://bugs.launchpad.net/bugs/1925522

Title:
  Introduce the 465 driver series, fabric-manager, and libnvidia-nscq

Status in fabric-manager-450 package in Ubuntu:
  Fix Released
Status in fabric-manager-460 package in Ubuntu:
  Fix Released
Status in libnvidia-nscq-450 package in Ubuntu:
  Fix Released
Status in libnvidia-nscq-460 package in Ubuntu:
  Fix Released
Status in linux-restricted-modules package in Ubuntu:
  In Progress
Status in nvidia-graphics-drivers-450-server package in Ubuntu:
  Fix Released
Status in nvidia-graphics-drivers-460 package in Ubuntu:
  Fix Released
Status in nvidia-graphics-drivers-465 package in Ubuntu:
  Fix Released
Status in nvidia-settings package in Ubuntu:
  In Progress
Status in fabric-manager-450 source package in Bionic:
  Fix Released
Status in fabric-manager-460 source package in Bionic:
  Fix Released
Status in libnvidia-nscq-450 source package in Bionic:
  Fix Released
Status in libnvidia-nscq-460 source package in Bionic:
  Fix Released
Status in linux-restricted-modules source package in Bionic:
  Fix Committed
Status in nvidia-graphics-drivers-450-server source package in Bionic:
  Fix Released
Status in nvidia-graphics-drivers-460 source package in Bionic:
  Fix Released
Status in nvidia-graphics-drivers-465 source package in Bionic:
  Fix Released
Status in nvidia-settings source package in Bionic:
  Fix Committed
Status in fabric-manager-450 source package in Focal:
  Fix Released
Status in fabric-manager-460 source package in Focal:
  Fix Released
Status in libnvidia-nscq-450 source package in Focal:
  Fix Released
Status in libnvidia-nscq-460 source package in Focal:
  Fix Released
Status in linux-restricted-modules source package in Focal:
  Fix Committed
Status in nvidia-graphics-drivers-450-server source package in Focal:
  Fix Released
Status in nvidia-graphics-drivers-460 source package in Focal:
  Fix Released
Status in nvidia-graphics-drivers-465 source package in Focal:
  Fix Released
Status in nvidia-settings source package in Focal:
  Fix Committed
Status in fabric-manager-450 source package in Groovy:
  Fix Committed
Status in fabric-manager-460 source package in Groovy:
  Fix Committed
Status in libnvidia-nscq-450 source package in Groovy:
  Fix Committed
Status in libnvidia-nscq-460 source package in Groovy:
  Fix Committed
Status in linux-restricted-modules source package in Groovy:
  Fix Committed
Status in nvidia-graphics-drivers-450-server source package in Groovy:
  Fix Released
Status in nvidia-graphics-drivers-460 source package in Groovy:
  Fix Released
Status in nvidia-graphics-drivers-465 source package in Groovy:
  Fix Released
Status in nvidia-settings source package in Groovy:
  Fix Committed
Status in fabric-manager-450 source package in Hirsute:
  Fix Released
Status in fabric-manager-460 source package in Hirsute:
  Fix Released
Status in libnvidia-nscq-450 source package in Hirsute:
  Fix Released
Status in libnvidia-nscq-460 source package in Hirsute:
  Fix Released
Status in linux-restricted-modules source package in Hirsute:
  Fix Committed
Status in nvidia-graphics-drivers-450-server source package in Hirsute:
  Fix Released
Status in nvidia-graphics-drivers-460 source package in Hirsute:
  Fix Released
Status in nvidia-graphics-drivers-465 source package in Hirsute:
  Fix Released
Status in nvidia-settings source package in Hirsute:
  Fix Committed

Bug description:
  Introduce the new NVIDIA 465 driver series, fabric-manager and
  libnvidia-nscq. Also migrate the UDA 450 series to the 460 series.

  [Impact]
  These releases provide both bug fixes and new features, and we would like to
  make sure all of our users have access to these improvements.

  See the changelog entry below for a full list of changes and bugs.

  [Test Case]
  The following development and SRU process was followed:
  https://wiki.ubuntu.com/NVidiaUpdates

  Certification test suite must pass on a range of hardware:
  https://git.launchpad.net/plainbox-provider-sru/tree/units/sru.pxu

  The QA team that executed the tests will be in charge of attaching the
  artifacts and console output of the appropriate run to the bug. nVidia
  maintainers team members will not mark ‘verification-done’ until this
  has happened.

  [Regression Potential]
  In order to

[Kernel-packages] [Bug 1922754] Re: Make AMD gpus choose YCbCr420 encoding automatically when required for 4k 60Hz output

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1925539] Re: ftrace synthetic_events selftests failure in 5.11

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1926184] Re: locking/qrwlock: Fix ordering in queued_write_lock_slowpath()

This bug was fixed in the package linux-aws - 5.11.0-1008.8+21.10.1

---
linux-aws (5.11.0-1008.8+21.10.1) impish; urgency=medium

  * impish/linux-aws: 5.11.0-1008.8+21.10.1 -proposed tracker (LP:
#1927561)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf

 -- Tim Gardner   Thu, 20 May 2021 13:54:07
-0600

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-aws in Ubuntu.
https://bugs.launchpad.net/bugs/1926184

Title:
  locking/qrwlock: Fix ordering in queued_write_lock_slowpath()

Status in linux package in Ubuntu:
  Fix Released
Status in linux-aws package in Ubuntu:
  Fix Released
Status in linux source package in Bionic:
  Fix Released
Status in linux-aws source package in Bionic:
  Fix Released
Status in linux source package in Focal:
  Fix Released
Status in linux-aws source package in Focal:
  Fix Released
Status in linux source package in Groovy:
  Fix Released
Status in linux-aws source package in Groovy:
  Fix Released
Status in linux source package in Hirsute:
  Fix Released
Status in linux-aws source package in Hirsute:
  Fix Released

Bug description:
  [Impact]
  * Out of order reads can fetch a NULL pointer causing a kernel crash. Affects 
kernels from v4.15 to v5.11.

  [Fix]
  * commit 84a24bf8c52e ("locking/qrwlock: Fix ordering in 
queued_write_lock_slowpath()")

  * For Bionic, we also require an additional patch: commit fcfdfe30e324
  ("locking/barriers: Introduce smp_cond_load_relaxed() and
  atomic_cond_read_relaxed()")

  [Where problems could occur]

  * This is quite a subtle bug. It is more prevalent on arm64. Regression
  possibility seems quite low. The worst impact could be a minor performance 
degradation.

  * Kernels 4.15 / 5.4 / 5.8 / 5.11 were successfully built and booted
  with this patch. Also, by using ftrace we could see that the changed
  function was executed with success multiple times.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1926184/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1926184] Re: locking/qrwlock: Fix ordering in queued_write_lock_slowpath()

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1926368] Re: Hirsute update: v5.11.14 upstream stable release

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1925522] Re: Introduce the 465 driver series, fabric-manager, and libnvidia-nscq

This bug was fixed in the package nvidia-graphics-drivers-450-server -
450.119.04-0ubuntu3

---
nvidia-graphics-drivers-450-server (450.119.04-0ubuntu3) impish; urgency=medium

  * debian/dkms_nvidia/patches/buildfix_kernel_5.13.patch,
debian/templates/dkms_nvidia.conf.in:
- Add support for Linux 5.13.

 -- Alberto Milone   Thu, 27 May 2021
12:42:41 +0200

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to nvidia-graphics-drivers-460 in Ubuntu.
https://bugs.launchpad.net/bugs/1925522

Title:
  Introduce the 465 driver series, fabric-manager, and libnvidia-nscq

Status in fabric-manager-450 package in Ubuntu:
  Fix Released
Status in fabric-manager-460 package in Ubuntu:
  Fix Released
Status in libnvidia-nscq-450 package in Ubuntu:
  Fix Released
Status in libnvidia-nscq-460 package in Ubuntu:
  Fix Released
Status in linux-restricted-modules package in Ubuntu:
  In Progress
Status in nvidia-graphics-drivers-450-server package in Ubuntu:
  Fix Released
Status in nvidia-graphics-drivers-460 package in Ubuntu:
  Fix Released
Status in nvidia-graphics-drivers-465 package in Ubuntu:
  Fix Released
Status in nvidia-settings package in Ubuntu:
  In Progress
Status in fabric-manager-450 source package in Bionic:
  Fix Released
Status in fabric-manager-460 source package in Bionic:
  Fix Released
Status in libnvidia-nscq-450 source package in Bionic:
  Fix Released
Status in libnvidia-nscq-460 source package in Bionic:
  Fix Released
Status in linux-restricted-modules source package in Bionic:
  Fix Committed
Status in nvidia-graphics-drivers-450-server source package in Bionic:
  Fix Released
Status in nvidia-graphics-drivers-460 source package in Bionic:
  Fix Released
Status in nvidia-graphics-drivers-465 source package in Bionic:
  Fix Released
Status in nvidia-settings source package in Bionic:
  Fix Committed
Status in fabric-manager-450 source package in Focal:
  Fix Released
Status in fabric-manager-460 source package in Focal:
  Fix Released
Status in libnvidia-nscq-450 source package in Focal:
  Fix Released
Status in libnvidia-nscq-460 source package in Focal:
  Fix Released
Status in linux-restricted-modules source package in Focal:
  Fix Committed
Status in nvidia-graphics-drivers-450-server source package in Focal:
  Fix Released
Status in nvidia-graphics-drivers-460 source package in Focal:
  Fix Released
Status in nvidia-graphics-drivers-465 source package in Focal:
  Fix Released
Status in nvidia-settings source package in Focal:
  Fix Committed
Status in fabric-manager-450 source package in Groovy:
  Fix Committed
Status in fabric-manager-460 source package in Groovy:
  Fix Committed
Status in libnvidia-nscq-450 source package in Groovy:
  Fix Committed
Status in libnvidia-nscq-460 source package in Groovy:
  Fix Committed
Status in linux-restricted-modules source package in Groovy:
  Fix Committed
Status in nvidia-graphics-drivers-450-server source package in Groovy:
  Fix Released
Status in nvidia-graphics-drivers-460 source package in Groovy:
  Fix Released
Status in nvidia-graphics-drivers-465 source package in Groovy:
  Fix Released
Status in nvidia-settings source package in Groovy:
  Fix Committed
Status in fabric-manager-450 source package in Hirsute:
  Fix Released
Status in fabric-manager-460 source package in Hirsute:
  Fix Released
Status in libnvidia-nscq-450 source package in Hirsute:
  Fix Released
Status in libnvidia-nscq-460 source package in Hirsute:
  Fix Released
Status in linux-restricted-modules source package in Hirsute:
  Fix Committed
Status in nvidia-graphics-drivers-450-server source package in Hirsute:
  Fix Released
Status in nvidia-graphics-drivers-460 source package in Hirsute:
  Fix Released
Status in nvidia-graphics-drivers-465 source package in Hirsute:
  Fix Released
Status in nvidia-settings source package in Hirsute:
  Fix Committed

Bug description:
  Introduce the new NVIDIA 465 driver series, fabric-manager and
  libnvidia-nscq. Also migrate the UDA 450 series to the 460 series.

  [Impact]
  These releases provide both bug fixes and new features, and we would like to
  make sure all of our users have access to these improvements.

  See the changelog entry below for a full list of changes and bugs.

  [Test Case]
  The following development and SRU process was followed:
  https://wiki.ubuntu.com/NVidiaUpdates

  Certification test suite must pass on a range of hardware:
  https://git.launchpad.net/plainbox-provider-sru/tree/units/sru.pxu

  The QA team that executed the tests will be in charge of attaching the
  artifacts and console output of the appropriate run to the bug. nVidia
  maintainers team members will not mark ‘verification-done’ until this
  has happened.

  [Regression Potential]
  In order to mitigate the regression potential, the results of the
  aforementioned system level tests are attached to this bug.

  [Discussion]

  [Changelog]

  == 450-server ==

    * New

[Kernel-packages] [Bug 1925075] Re: Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1924238] Re: Fix no picture from HDMI when it's plugged after boot

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1926999] Re: Hirsute update: v5.11.16 upstream stable release

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1927535] Re: Hirsute update: v5.11.17 upstream stable release

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1905466] Re: drm/i915: Drop force_probe requirement for Rocket Lake

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1912499] Re: Reset upload number to 1 for derivative ABI bumps

This bug was fixed in the package linux-meta - 5.11.0.18.19+21.10.1

---
linux-meta (5.11.0.18.19+21.10.1) impish; urgency=medium

  * Bump ABI 5.11.0-18.19+21.10

  * Reset upload number to 1 for derivative ABI bumps (LP: #1912499)
- [Packaging] update-version -- Reset upload number on abi bump

  * Packaging resync (LP: #1786013)
- [Packaging] resync debian/dkms-versions from main package

 -- Seth Forshee   Thu, 13 May 2021 16:08:47
-0500

** Changed in: linux-meta (Ubuntu)
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-meta in Ubuntu.
https://bugs.launchpad.net/bugs/1912499

Title:
  Reset upload number to 1 for derivative ABI bumps

Status in linux-meta package in Ubuntu:
  Fix Released

Bug description:
  [Impact]

  For derivative kernels we reset the upload number to 1 when bumping
  the ABI. For the meta packages we just continue to increment the
  upload number. This at best looks odd and at worst may result in some
  confusion.

  Update the scripting in linux-meta to likewise reset the upload number
  whenever its derivative kernel has done an ABI bump.

  [Test Case]

  When preparing a derivative meta package, note that an ABI bump
  results in the upload number being reset to 1, while subsequent
  uploads using the same ABI result in incrementing the upload number.

  [Where problems could occur]

  This change affects only preparation of derivative meta packages. Bugs
  could result in having an unexpected upload number in the package
  version, but any such mistakes should be caught when reviewing package
  changes prior to upload.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/1912499/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1925386] Re: Upgrade from 460.32.03-0ubuntu2 to 460.73.01-0ubuntu1 fails

This bug was fixed in the package nvidia-graphics-drivers-460 -
460.80-0ubuntu3

---
nvidia-graphics-drivers-460 (460.80-0ubuntu3) impish; urgency=medium

  * debian/dkms_nvidia/patches/buildfix_kernel_5.13.patch,
debian/templates/dkms_nvidia.conf.in:
- Add support for Linux 5.13.

 -- Alberto Milone   Wed, 26 May 2021
17:37:16 +0200

** Changed in: nvidia-graphics-drivers-460 (Ubuntu)
   Status: Triaged => Fix Released

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to nvidia-graphics-drivers-460 in Ubuntu.
https://bugs.launchpad.net/bugs/1925386

Title:
  Upgrade from 460.32.03-0ubuntu2 to 460.73.01-0ubuntu1 fails

Status in nvidia-graphics-drivers-460 package in Ubuntu:
  Fix Released
Status in nvidia-graphics-drivers-460-server package in Ubuntu:
  Triaged
Status in nvidia-graphics-drivers-460 source package in Bionic:
  Fix Released
Status in nvidia-graphics-drivers-460 source package in Focal:
  Fix Released
Status in nvidia-graphics-drivers-460 source package in Groovy:
  Fix Released
Status in nvidia-graphics-drivers-460 source package in Hirsute:
  Fix Released

Bug description:
  ubuntu@dgx-1-exotic-skunk-201710-25896:~$ sudo apt install 
nvidia-dkms-460-server nvidia-utils-460-server
  Reading package lists... Done
  Building dependency tree... Done
  Reading state information... Done
  The following additional packages will be installed:
nvidia-kernel-common-460-server
  Suggested packages:
nvidia-driver-460-server
  The following packages will be upgraded:
nvidia-dkms-460-server nvidia-kernel-common-460-server
nvidia-utils-460-server
  3 upgraded, 0 newly installed, 0 to remove and 37 not upgraded.
  Need to get 424 kB of archives.
  After this operation, 0 B of additional disk space will be used.
  Do you want to continue? [Y/n] 
  Get:1 http://archive.ubuntu.com/ubuntu hirsute-proposed/restricted amd64 
nvidia-dkms-460-server amd64 460.73.01-0ubuntu1 [42.8 kB]
  Get:2 http://archive.ubuntu.com/ubuntu hirsute-proposed/restricted amd64 
nvidia-kernel-common-460-server amd64 460.73.01-0ubuntu1 [18.4 kB]
  Get:3 http://archive.ubuntu.com/ubuntu hirsute-proposed/restricted amd64 
nvidia-utils-460-server amd64 460.73.01-0ubuntu1 [363 kB]
  Fetched 424 kB in 2s (220 kB/s)  
  (Reading database ... 87065 files and directories currently installed.)
  Preparing to unpack .../nvidia-dkms-460-server_460.73.01-0ubuntu1_amd64.deb 
...
  Removing all DKMS Modules
  Done.
  Unpacking nvidia-dkms-460-server (460.73.01-0ubuntu1) over 
(460.32.03-0ubuntu2) 
  ...
  Preparing to unpack 
.../nvidia-kernel-common-460-server_460.73.01-0ubuntu1_amd64
  .deb ...
  Unpacking nvidia-kernel-common-460-server (460.73.01-0ubuntu1) over 
(460.32.03-0
  ubuntu2) ...
  Preparing to unpack .../nvidia-utils-460-server_460.73.01-0ubuntu1_amd64.deb 
...
  Unpacking nvidia-utils-460-server (460.73.01-0ubuntu1) over 
(460.32.03-0ubuntu2)
   ...
  Setting up nvidia-kernel-common-460-server (460.73.01-0ubuntu1) ...
  update-initramfs: deferring update (trigger activated)
  Setting up nvidia-utils-460-server (460.73.01-0ubuntu1) ...
  Setting up nvidia-dkms-460-server (460.73.01-0ubuntu1) ...
  update-initramfs: deferring update (trigger activated)
  Loading new nvidia-srv-460.73.01 DKMS files...
  Building for 5.11.0-16-generic
  Building for architecture x86_64
  Building initial module for 5.11.0-16-generic
  Error! Application of patch 
disable_fstack-clash-protection_fcf-protection.patch
   failed.
  Check /var/lib/dkms/nvidia-srv/460.73.01/build/ for more information.
  dpkg: error processing package nvidia-dkms-460-server (--configure):
   installed nvidia-dkms-460-server package post-installation script subprocess 
re
  turned error exit status 6
  Processing triggers for man-db (2.9.4-2) ...
  Processing triggers for initramfs-tools (0.139ubuntu3) ...
  update-initramfs: Generating /boot/initrd.img-5.11.0-16-generic
  W: Possible missing firmware /lib/firmware/ast_dp501_fw.bin for module ast
  Errors were encountered while processing:
   nvidia-dkms-460-server
  needrestart is being skipped since dpkg has failed
  E: Sub-process /usr/bin/dpkg returned an error code (1)
  ubuntu@dgx-1-exotic-skunk-201710-25896:~$ ls 
/var/lib/dkms/nvidia-srv/460.73.01/build/
  dkms.conf  patches
  ubuntu@dgx-1-exotic-skunk-201710-25896:~$

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-460/+bug/1925386/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1923415] Re: Hirsute update: v5.11.13 upstream stable release

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1927050] Re: Enable BLK_DEV_NVME =y to support "shielded VM minimal images"

This bug was fixed in the package linux-gcp - 5.11.0-1008.8+21.10.1

---
linux-gcp (5.11.0-1008.8+21.10.1) impish; urgency=medium

  * impish/linux-gcp: 5.11.0-1008.8+21.10.1 -proposed tracker (LP:
#1927565)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

 -- Paolo Pisati   Thu, 20 May 2021 13:01:39
+0200

** Changed in: linux-gcp (Ubuntu)
   Status: Invalid => Fix Released

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-gcp in Ubuntu.
https://bugs.launchpad.net/bugs/1927050

Title:
  Enable BLK_DEV_NVME =y to support "shielded VM minimal images"

Status in linux-gcp package in Ubuntu:
  Fix Released
Status in linux-gcp-4.15 package in Ubuntu:
  Invalid
Status in linux-gcp source package in Bionic:
  Invalid
Status in linux-gcp-4.15 source package in Bionic:
  Fix Released
Status in linux-gcp source package in Focal:
  Fix Released
Status in linux-gcp-4.15 source package in Focal:
  Invalid
Status in linux-gcp source package in Groovy:
  Fix Released
Status in linux-gcp-4.15 source package in Groovy:
  Invalid
Status in linux-gcp source package in Hirsute:
  Fix Released
Status in linux-gcp-4.15 source package in Hirsute:
  Invalid

Bug description:
  This is requested by CPC -- see the title.

  [Impact]
  nvme.ko exists outside the kernel currently

  [Fix]
  Enable BLK_DEV_NVME=y 

  [Test]
  Tested by CPC crew / Google: 

  > The test images have passed testing and we would like this enabled so we
  > can have minimal images boot with NVME boot disk and so we can enable
  > GCE confidential VMs with minimal images.

  
  [Regression Potential]
  Not aware of any.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-gcp/+bug/1927050/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1926993] Re: Hirsute update: v5.11.15 upstream stable release

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1926792] Re: Fix kernel panic at boot on dual GFX systems

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1924207] Re: [SRU][F:OEM-5.10/G/H] add realtek 8852 bluetooth support

This bug was fixed in the package linux - 5.11.0-18.19+21.10.1

---
linux (5.11.0-18.19+21.10.1) impish; urgency=medium

  * impish/linux: 5.11.0-18.19+21.10.1 -proposed tracker (LP: #1927560)

  * Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- update dkms package versions

  [ Ubuntu: 5.11.0-18.19 ]

  * hirsute/linux: 5.11.0-18.19 -proposed tracker (LP: #1927578)
  * Packaging resync (LP: #1786013)
- update dkms package versions
  * Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
  * linux-image-5.0.0-35-generic breaks checkpointing of container
(LP: #1857257)
- SAUCE: overlayfs: fix incorrect mnt_id of files opened from map_files
  * Hirsute update: v5.11.17 upstream stable release (LP: #1927535)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- Revert "UBUNTU: SAUCE: ovl: Restore vm_file value when lower fs mmap 
fails"
- ovl: fix reference counting in ovl_mmap error path
- coda: fix reference counting in coda_file_mmap error path
- amd/display: allow non-linear multi-planar formats
- drm/amdgpu: reserve fence slot to update page table
- drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: asus: Add support for 2021 ASUS N-Key keyboard
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- m68k: fix flatmem memory model setup
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.11.17
  * locking/qrwlock: Fix ordering in queued_write_lock_slowpath() (LP: #1926184)
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
  * Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
  * Gigabyte R120-T33 (ARM ThunderX SoC) fails to boot in ACPI mode
(LP: #1925075)
- ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
  * CirrusLogic: Cracking noises appears in built-in speaker when output volume
is set >80% (LP: #1924997)
- ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  * CirrusLogic: The default input volume is "0%" (LP: #1923557)
- ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  * Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
  * Make AMD gpus choose YCbCr420 encoding automatically when required for 4k
60Hz output (LP: #1922754)
- drm/amd/display: Try YCbCr420 color when YCbCr444 fails
  * Hirsute update: v5.11.16 upstream stable release (LP: #1926999)
- AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev
  struct
- AMD_SFH: Add sensor_mask module parameter
- AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus
  bits
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey va

[Kernel-packages] [Bug 1931001] Re: kernel: watchdog: BUG: soft lockup - CPU#3 stuck for 22s!

2021-06-07 Thread vcarceler

Hello Cascardo.

Here you will find dmesg.tgz with:

dmesg/dmesg-2021-05-07-08-22.txt
dmesg/dmesg-normal.txt
dmesg/dmesg-unresponsive.txt
dmesg/dmesg-2021-05-20.txt


dmesg-normal.txt is a full dmesg when the computer works fine.

dmesg-unresponsive.txt is a full dmesg in which the computer boots and
very soon becomes unresponsive to trackpad and even you can type faster
than computers manages to process. Usually this happens on the first
boot after a full day with the laptop shut down.

dmesg-2021-05-07-08-22.txt and dmesg-2021-05-20.txt are full dmesg in
which you can see the message CPU# stuck for 22s!

When this happens nothing works well. I even deployed a small script to
reboot the laptop when this happens.

We are an school with hundreds of desktops and laptops with ubuntu 20.04
without problems. But we have received a big number of this lenovo
laptops that does't work well with ubuntu 20.04 or 21.04.

I don't know if it may help you but with Fedora 34 the laptop works
fine.

Thank you for your attention.

** Attachment added: "dmesg.tgz"
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931001/+attachment/5502949/+files/dmesg.tgz

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1931001

Title:
  kernel: watchdog: BUG: soft lockup - CPU#3 stuck for 22s!

Status in linux package in Ubuntu:
  New

Bug description:
  Ubuntu 20.04 LTS and Ubuntu 21.04 occasionally boots with very bad
  performance and very unresponsive to user input on Lenovo laptop
  Lenovo 300e 2nd Gen 81M9 (LENOVO_MT_81M9_BU_idea_FM_300e 2nd G).

  When this happens you can read this kind of messages on journal:

  ---
  root@alumne-1-58:~# journalctl | grep "BUG: soft"
  may 20 21:44:35 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 22s! [swapper/3:0]
  may 20 21:44:35 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 22s! [swapper/3:0]
  may 22 09:33:34 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#0 stuck 
for 22s! [swapper/0:0]
  may 24 16:45:14 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#1 stuck 
for 23s! [prometheus-node:4220]
  may 24 16:45:14 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#0 stuck 
for 23s! [swapper/0:0]
  jun 03 00:01:09 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#0 stuck 
for 22s! [swapper/0:0]
  jun 03 00:01:09 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#0 stuck 
for 23s! [swapper/0:0]
  jun 03 00:01:09 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#1 stuck 
for 22s! [swapper/1:0]
  jun 03 00:01:09 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#0 stuck 
for 22s! [swapper/0:0]
  jun 03 00:02:15 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#0 stuck 
for 21s! [swapper/0:0]
  jun 05 08:22:58 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 22s! [irq/138-iwlwifi:1044]
  jun 05 08:25:06 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#2 stuck 
for 22s! [swapper/2:0]
  jun 05 08:25:06 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 22s! [irq/138-iwlwifi:1044]
  jun 05 08:26:42 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#1 stuck 
for 23s! [lxd:3975]
  jun 05 08:26:42 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#2 stuck 
for 23s! [swapper/2:0]
  jun 05 08:26:42 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 23s! [irq/138-iwlwifi:1044]
  jun 05 08:27:38 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 23s! [irq/138-iwlwifi:1044]
  jun 05 08:28:34 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 22s! [irq/138-iwlwifi:1044]
  jun 05 08:29:46 alumne-1-58 kernel: watchdog: BUG: soft lockup - CPU#3 stuck 
for 22s! [irq/138-iwlwifi:1044]
  root@alumne-1-58:~#
  ---

  Usually if you reboot everything works fine but it's very annoying
  when happens.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931001/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1931129] Re: v5.13 net bpf selftests fail with older clang toolchains

2021-06-07 Thread Ubuntu Foundations Team Bug Bot

** Tags added: patch

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1931129

Title:
  v5.13 net bpf selftests fail with older clang toolchains

Status in linux package in Ubuntu:
  New

Bug description:
  selftests/bpf: add ifdefs in tests for required Clang versions

  This codifies the clang version requirements from README.rst in the
  code, such that only expected working test cases are compiled for the
  expected clang version combinations. This insures that most tests are
  still executed, even when one doesn't have access to the latest clang
  toolchain.

  Also see internal v5.13 test results.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931129/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1931147] [NEW] Fix non-working GPU on Some HP desktops

Public bug reported:

[Impact] 
Integrated GPU on AMD based HP desktop doesn't work.

[Fix]
Coalesce host bridge contiguous apertures so the resources requested by
child devices can be met.
  
[Test]
Boot affected systems. No picture from the iGPU.
With the patch applied, iGPU can work normally.
  
[Where problems could occur]
Assume there are device A and device B and they request overlapped
resource region, the original logic may not be able to allocate enough
resource for A so device B claimed the resource in the end. 

Once the fix is applied, the region may be big enough for device A,
hence device B won't be able to get the resource it needs.

Hopefully we don't have such broken systems.

** Affects: hwe-next
 Importance: Undecided
 Status: New

** Affects: linux (Ubuntu)
 Importance: Critical
 Status: Confirmed

** Affects: linux-oem-5.10 (Ubuntu)
 Importance: Undecided
 Status: Invalid

** Affects: linux (Ubuntu Focal)
 Importance: Undecided
 Status: Won't Fix

** Affects: linux-oem-5.10 (Ubuntu Focal)
 Importance: Critical
 Status: Confirmed

** Affects: linux (Ubuntu Hirsute)
 Importance: Critical
 Status: Confirmed

** Affects: linux-oem-5.10 (Ubuntu Hirsute)
 Importance: Undecided
 Status: Invalid


** Tags: oem-priority originate-from-1914373 stella

** Also affects: linux (Ubuntu Focal)
   Importance: Undecided
   Status: New

** Also affects: linux (Ubuntu Hirsute)
   Importance: Undecided
   Status: New

** Also affects: linux-oem-5.10 (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: linux-oem-5.10 (Ubuntu)
   Status: New => Invalid

** Changed in: linux-oem-5.10 (Ubuntu Focal)
   Status: New => Confirmed

** Changed in: linux-oem-5.10 (Ubuntu Hirsute)
   Status: New => Invalid

** Changed in: linux (Ubuntu Focal)
   Status: New => Won't Fix

** Changed in: linux (Ubuntu)
   Status: New => Confirmed

** Changed in: linux (Ubuntu Hirsute)
   Status: New => Confirmed

** Changed in: linux (Ubuntu)
   Importance: Undecided => Critical

** Changed in: linux (Ubuntu Hirsute)
   Importance: Undecided => Critical

** Changed in: linux-oem-5.10 (Ubuntu Focal)
   Importance: Undecided => Critical

** Tags added: oem-priority originate-from-1914373 stella

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1931147

Title:
  Fix non-working GPU on Some HP desktops

Status in HWE Next:
  New
Status in linux package in Ubuntu:
  Confirmed
Status in linux-oem-5.10 package in Ubuntu:
  Invalid
Status in linux source package in Focal:
  Won't Fix
Status in linux-oem-5.10 source package in Focal:
  Confirmed
Status in linux source package in Hirsute:
  Confirmed
Status in linux-oem-5.10 source package in Hirsute:
  Invalid

Bug description:
  [Impact] 
  Integrated GPU on AMD based HP desktop doesn't work.

  [Fix]
  Coalesce host bridge contiguous apertures so the resources requested by
  child devices can be met.

  [Test]
  Boot affected systems. No picture from the iGPU.
  With the patch applied, iGPU can work normally.

  [Where problems could occur]
  Assume there are device A and device B and they request overlapped
  resource region, the original logic may not be able to allocate enough
  resource for A so device B claimed the resource in the end. 

  Once the fix is applied, the region may be big enough for device A,
  hence device B won't be able to get the resource it needs.

  Hopefully we don't have such broken systems.

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1931147/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1927925] Re: Massive network problems with I219-V on Thinkpad T14 Gen2 (e1000e)

Thanks for the testing. Please give this kernel a try without any parameter:
https://people.canonical.com/~khfeng/lp1927925-qos/

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1927925

Title:
  Massive network problems with I219-V on Thinkpad T14 Gen2 (e1000e)

Status in OEM Priority Project:
  Confirmed
Status in linux package in Ubuntu:
  Confirmed

Bug description:
  I recently got a Thinkpad T14 Gen2 with a I219-V network adapter
  (8086:15fc). I get very slow connection speeds and even total loss of
  connectivity without seeing much in the logs (like dmesg etc.).
  ethtool reports CRC errors and paket loss. Besides Ubuntu 21.04/kernel
  5.11 I tried to install Ubuntu 20.04 (kernel seems to old) and i tried
  the e1000e driver directly from upstream (3.8.7) with no success.

  A strange behaviour I observed: if connectivity is lost (notebook is
  not reachable via ping from another host), if I do something like
  "ping 8.8.8.8" on the notebook itself, it becomes reachable from the
  other host again.

  Downloads in general are very slow if they work at all.

  WLAN (AX210) seems to work fine, wired network using a USB-network adapter 
works fine, too.
  --- 
  ProblemType: Bug
  ApportVersion: 2.20.11-0ubuntu65
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ros3285 F pulseaudio
  CasperMD5CheckResult: pass
  DistroRelease: Ubuntu 21.04
  HibernationDevice: RESUME=none
  InstallationDate: Installed on 2021-05-07 (2 days ago)
  InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420)
  MachineType: LENOVO 20W0004MGE
  NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair
  Package: linux (not installed)
  ProcFB: 0 i915drmfb
  ProcKernelCmdLine: BOOT_IMAGE=/BOOT/ubuntu_n51dtp@/vmlinuz-5.11.0-16-generic 
root=ZFS=rpool/ROOT/ubuntu_n51dtp ro quiet splash vt.handoff=1
  ProcVersionSignature: Ubuntu 5.11.0-16.17-generic 5.11.12
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-5.11.0-16-generic N/A
   linux-backports-modules-5.11.0-16-generic  N/A
   linux-firmware 1.197
  Tags:  hirsute
  Uname: Linux 5.11.0-16-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: N/A
  _MarkForUpload: True
  dmi.bios.date: 03/10/2021
  dmi.bios.release: 1.10
  dmi.bios.vendor: LENOVO
  dmi.bios.version: N34ET21W (1.10 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 20W0004MGE
  dmi.board.vendor: LENOVO
  dmi.board.version: SDK0J40697 WIN
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: None
  dmi.ec.firmware.release: 1.8
  dmi.modalias: 
dmi:bvnLENOVO:bvrN34ET21W(1.10):bd03/10/2021:br1.10:efr1.8:svnLENOVO:pn20W0004MGE:pvrThinkPadT14Gen2i:rvnLENOVO:rn20W0004MGE:rvrSDK0J40697WIN:cvnLENOVO:ct10:cvrNone:
  dmi.product.family: ThinkPad T14 Gen 2i
  dmi.product.name: 20W0004MGE
  dmi.product.sku: LENOVO_MT_20W0_BU_Think_FM_ThinkPad T14 Gen 2i
  dmi.product.version: ThinkPad T14 Gen 2i
  dmi.sys.vendor: LENOVO
  --- 
  ProblemType: Bug
  ApportVersion: 2.20.11-0ubuntu27.18
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ros1673 F pulseaudio
   /dev/snd/controlC1:  ros1673 F pulseaudio
  CasperMD5CheckResult: skip
  DistroRelease: Ubuntu 20.04
  InstallationDate: Installed on 2021-05-31 (0 days ago)
  InstallationMedia: Ubuntu 20.04.2.0 LTS "Focal Fossa" - Release amd64 
(20210209.1)
  MachineType: LENOVO 20W0004MGE
  Package: linux (not installed)
  ProcFB: 0 i915drmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.10.0-1026-oem 
root=/dev/mapper/vgubuntu-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 5.10.0-1026.27-oem 5.10.31
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-5.10.0-1026-oem N/A
   linux-backports-modules-5.10.0-1026-oem  N/A
   linux-firmware   1.187.12
  Tags:  focal
  Uname: Linux 5.10.0-1026-oem x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: N/A
  _MarkForUpload: True
  dmi.bios.date: 03/10/2021
  dmi.bios.release: 1.10
  dmi.bios.vendor: LENOVO
  dmi.bios.version: N34ET21W (1.10 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 20W0004MGE
  dmi.board.vendor: LENOVO
  dmi.board.version: SDK0J40697 WIN
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: None
  dmi.ec.firmware.release: 1.8
  dmi.modalias: 
dmi:bvnLENOVO:bvrN34ET21W(1.10):bd03/10/2021:br1.10:efr1.8:s

[Kernel-packages] [Bug 1928788] Re: linux-azure: Add Mana network driver

2021-06-07 Thread Tim Gardner

** Also affects: linux-azure-5.8 (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: linux-azure-5.8 (Ubuntu Focal)
   Status: New => In Progress

** Changed in: linux-azure-5.8 (Ubuntu Groovy)
   Status: New => Invalid

** Changed in: linux-azure-5.8 (Ubuntu)
   Status: New => Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-azure in Ubuntu.
https://bugs.launchpad.net/bugs/1928788

Title:
  linux-azure: Add Mana network driver

Status in linux package in Ubuntu:
  Fix Released
Status in linux-azure package in Ubuntu:
  Fix Released
Status in linux-azure-5.8 package in Ubuntu:
  Invalid
Status in linux source package in Focal:
  Invalid
Status in linux-azure source package in Focal:
  Fix Committed
Status in linux-azure-5.8 source package in Focal:
  In Progress
Status in linux source package in Groovy:
  Invalid
Status in linux-azure source package in Groovy:
  Fix Committed
Status in linux-azure-5.8 source package in Groovy:
  Invalid

Bug description:
  SRU Justification

  [Impact]

  Microsoft has requested the addition of the "mana" driver from Linux v5.11
  https://canonical.my.salesforce.com/5004K05pZQCQA2

  [Fix]

  This patch set consists of 5 patches that are now in mainline.

  The patches add the VF driver for Microsoft Azure Network Adapter
  (MANA), and also changes the hv_netvsc driver's netvsc/VF binding
  logic to check both the MAC address and the serial number (this is
  required by the MANA VF driver).

  Microsoft would like to request the following 5 patches in all
  supported releases:

  
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=64ff412ad41fe3a5bf759ff4844dc1382176485c

  https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-
  next.git/commit/?id=ca9c54d2d6a5ab2430c4eda364c77125d62e5e0f

  https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-
  next.git/commit/?id=55cdc26a91ac270887583945aef2bd460a2805f7

  https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-
  next.git/commit/?id=45b102dd81491e30ac7596b5515856141f99319f

  https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-
  next.git/commit/?id=d90a94680bc0a8069d93282bc5f2966d00b9c4a4

  [Test Plan]

  2021-05-17 15:25 UTC-
  -We tested the two versions of mana.ko:

  root@decui-u2004-vf:~# uname -a
  Linux decui-u2004-vf 5.4.0-1048-azure #50~sf00310147.1-Ubuntu SMP Tue May 11 
02:06:24 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
  root@decui-u2004-vf:~# modinfo mana | grep filename
  filename: 
/lib/modules/5.4.0-1048-azure/kernel/drivers/net/ethernet/microsoft/mana/mana.ko

  root@decui-u2004-vf:~# uname -a
  Linux decui-u2004-vf 5.8.0-1032-azure #34~SF00310147.1-Ubuntu SMP Tue May 11 
02:01:58 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
  root@decui-u2004-vf:~# modinfo mana | grep filename
  filename: 
/lib/modules/5.8.0-1032-azure/kernel/drivers/net/ethernet/microsoft/mana/mana.ko

  Everything worked as expected in our testing:
  1. The MANA driver loads and unloads multiple times without any issue.
  2. iperf TX/RX tests run without any issue, and the performance numbers are 
on par with what we get with the latest mainline kernel: the TX number is 
pretty good; the RX number is sometimes not great but this is a known issue 
with the latest mainline kernel as well.
  3. "ethtool -S" and "ethtool -L" work as expected.
  4. When iperf TX/RX tests are running, changing the number of the MANA NIC 
TX/RX queues and unloading/reloading the MANA driver work without any issue.

  [Where problems could occur]

  The driver may have bug(s) that cause a kernel crash.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1928788/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1903426] Re: package firmware-b43-installer 1:019-6 failed to install/upgrade: installed firmware-b43-installer package post-installation script subprocess returned error exit s

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: b43-fwcutter (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to b43-fwcutter in Ubuntu.
https://bugs.launchpad.net/bugs/1903426

Title:
  package firmware-b43-installer 1:019-6 failed to install/upgrade:
  installed firmware-b43-installer package post-installation script
  subprocess returned error exit status 1

Status in b43-fwcutter package in Ubuntu:
  Confirmed

Bug description:
  Upgrading system from Ubuntu MATE 20.04 to Ubuntu MATE 20.10 via
  Alt+F2 and then update-manager -c

  Updates begins but error shows with Could not install
  'firmware-b43-installer' (Screenshot attached)

  Upgrade completes but shows error message "Upgrade could not be
  installed, system may be unusable"

  System shows that the firmware is installed: 
firmware-b43-installer/groovy,groovy,now 1:019-6 all [installed]
firmware installer for the b43 driver

  ProblemType: Package
  DistroRelease: Ubuntu 20.10
  Package: firmware-b43-installer 1:019-6
  ProcVersionSignature: Ubuntu 5.8.0-26.27-generic 5.8.14
  Uname: Linux 5.8.0-26-generic x86_64
  ApportVersion: 2.20.11-0ubuntu50
  Architecture: amd64
  CasperMD5CheckResult: skip
  Date: Sat Nov  7 17:22:21 2020
  ErrorMessage: installed firmware-b43-installer package post-installation 
script subprocess returned error exit status 1
  InstallationDate: Installed on 2019-04-25 (562 days ago)
  InstallationMedia: Ubuntu-MATE 19.04 "Disco Dingo" - Release amd64 (20190416)
  PackageArchitecture: all
  Python3Details: /usr/bin/python3.8, Python 3.8.6, python3-minimal, 
3.8.6-0ubuntu1
  PythonDetails: /usr/bin/python2.7, Python 2.7.18, python-is-python2, 2.7.17-4
  RelatedPackageVersions:
   dpkg 1.20.5ubuntu2
   apt  2.1.10
  SourcePackage: b43-fwcutter
  Title: package firmware-b43-installer 1:019-6 failed to install/upgrade: 
installed firmware-b43-installer package post-installation script subprocess 
returned error exit status 1
  UpgradeStatus: Upgraded to groovy on 2020-11-08 (0 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/b43-fwcutter/+bug/1903426/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1929657] Re: [Ubuntu 20.4.2] vLan not getting static IP assigned (on s390x)

2021-06-07 Thread Frank Heimes

I was now able to work on trying to recreate this situation - even if I
will not be able to recreate it exactly due to different CEC and
peripherals.

On a clean 20.04.2 install (incl. latest updates) with 4 OSA based qeth
devices, I have the first qeth device with only one IP address assigned
to the vlan interface - that is what I wanted, since that is the default
(and I want to make sure to always be able to reach the system).

Then I added 4 additional qeth devices and assigned IP addresses to the
base-, as well as to their vlan-interface, both - everything is fine so
far and all 8 (well, in total 9) addresses got statically assigned.

I'll now try to add RoCE interfaces on top of this, but I only have RoCE
1 aka Mellanox Connect-X 3.


Btw. have you been able to gather the journal logs, so that you can share them 
with us, too?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1929657

Title:
  [Ubuntu 20.4.2]  vLan not getting static IP assigned (on s390x)

Status in Ubuntu on IBM z Systems:
  Incomplete
Status in linux package in Ubuntu:
  New
Status in netplan.io package in Ubuntu:
  New

Bug description:
  ---Problem Description---
  Doing vLAN configuration one of the vLANs is not getting static IP assigned 
when the rest are workin without problems
   
  Contact Information = Mario Alvarado/mario.alberto.gali...@ibm.com 
   
  ---uname output---
  Linux ilabg13.tuc.stglabs.ibm.com 5.4.0-73-generic #82-Ubuntu SMP Wed Apr 14 
17:29:32 UTC 2021 s390x s390x s390x GNU/Linux
   
  Machine Type = z15 
   
  ---Debugger---
  A debugger is not configured
   
  ---Steps to Reproduce---
   1)Configure the netplan file as follow:
  root@ilabg13:~# cat /etc/netplan/01-iscsi-config.yaml

  # This is the network config written by 'subiquity'

  network:

ethernets:

  encdb0:

addresses:

- 11.111.114.213/22

macaddress: 02:76:54:00:00:03

  encdc0:

addresses:

- 11.111.112.213/22

macaddress: 02:76:54:00:00:04

  enP50s3832 :

addresses:

- 11.111.112.214/22

  enP53p0s0:

addresses:

- 11.111.112.215/22

vlans:

  encdb0.160:

id: 160

link: encdb0

mtu: 9000

addresses:

- 192.168.160.53/24

  encdc0.150:

id: 150

link: encdc0

mtu: 9000

addresses:

- 192.168.150.53/24

  enP50s3832.170:

id: 170

link: enP50s3832

mtu: 9000

addresses:

- 192.168.170.53/24

  enP53p0s0.171:

id: 171

link: enP53p0s0

mtu: 9000

addresses:

- 192.168.171.53/24

version: 2

  2)run net plan apply:
  root@ilabg13:~# netplan --debug apply

  ** (generate:59965): DEBUG: 14:55:15.046: Processing input file
  /etc/netplan/00-installer-config.yaml..

  ** (generate:59965): DEBUG: 14:55:15.046: starting new processing pass

  ** (generate:59965): DEBUG: 14:55:15.046: Processing input file
  /etc/netplan/01-iscsi-config.yaml..

  ** (generate:59965): DEBUG: 14:55:15.046: starting new processing pass

  ** (generate:59965): DEBUG: 14:55:15.046: We have some netdefs, pass
  them through a final round of validation

  ** (generate:59965): DEBUG: 14:55:15.046: encdc0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdb0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: ence0f: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdb0.160: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP50s3832: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP53p0s0.171: setting
  default backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP50s3832.170: setting
  default backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP53p0s0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdc0.150: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.047: Generating output files..

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  ence0f is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  ence0f is not for us

[Kernel-packages] [Bug 1929657] Comment bridged from LTC Bugzilla

--- Comment From mario.alberto.gali...@ibm.com 2021-06-07 13:56 EDT---
Could you provide a place to upload the system.journal file? it pass the limit 
of 51200 KB

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1929657

Title:
  [Ubuntu 20.4.2]  vLan not getting static IP assigned (on s390x)

Status in Ubuntu on IBM z Systems:
  Incomplete
Status in linux package in Ubuntu:
  New
Status in netplan.io package in Ubuntu:
  New

Bug description:
  ---Problem Description---
  Doing vLAN configuration one of the vLANs is not getting static IP assigned 
when the rest are workin without problems
   
  Contact Information = Mario Alvarado/mario.alberto.gali...@ibm.com 
   
  ---uname output---
  Linux ilabg13.tuc.stglabs.ibm.com 5.4.0-73-generic #82-Ubuntu SMP Wed Apr 14 
17:29:32 UTC 2021 s390x s390x s390x GNU/Linux
   
  Machine Type = z15 
   
  ---Debugger---
  A debugger is not configured
   
  ---Steps to Reproduce---
   1)Configure the netplan file as follow:
  root@ilabg13:~# cat /etc/netplan/01-iscsi-config.yaml

  # This is the network config written by 'subiquity'

  network:

ethernets:

  encdb0:

addresses:

- 11.111.114.213/22

macaddress: 02:76:54:00:00:03

  encdc0:

addresses:

- 11.111.112.213/22

macaddress: 02:76:54:00:00:04

  enP50s3832 :

addresses:

- 11.111.112.214/22

  enP53p0s0:

addresses:

- 11.111.112.215/22

vlans:

  encdb0.160:

id: 160

link: encdb0

mtu: 9000

addresses:

- 192.168.160.53/24

  encdc0.150:

id: 150

link: encdc0

mtu: 9000

addresses:

- 192.168.150.53/24

  enP50s3832.170:

id: 170

link: enP50s3832

mtu: 9000

addresses:

- 192.168.170.53/24

  enP53p0s0.171:

id: 171

link: enP53p0s0

mtu: 9000

addresses:

- 192.168.171.53/24

version: 2

  2)run net plan apply:
  root@ilabg13:~# netplan --debug apply

  ** (generate:59965): DEBUG: 14:55:15.046: Processing input file
  /etc/netplan/00-installer-config.yaml..

  ** (generate:59965): DEBUG: 14:55:15.046: starting new processing pass

  ** (generate:59965): DEBUG: 14:55:15.046: Processing input file
  /etc/netplan/01-iscsi-config.yaml..

  ** (generate:59965): DEBUG: 14:55:15.046: starting new processing pass

  ** (generate:59965): DEBUG: 14:55:15.046: We have some netdefs, pass
  them through a final round of validation

  ** (generate:59965): DEBUG: 14:55:15.046: encdc0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdb0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: ence0f: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdb0.160: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP50s3832: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP53p0s0.171: setting
  default backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP50s3832.170: setting
  default backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP53p0s0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdc0.150: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.047: Generating output files..

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  ence0f is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  ence0f is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  encdb0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  encdb0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  encdc0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  encdc0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  enP50s3832 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  enP50s3832 is not for us (backend 1)

  ** (generate:599

[Kernel-packages] [Bug 1929455] Re: Hirsute update: v5.11.21 upstream stable release

2021-06-07 Thread Tim Gardner

** Also affects: linux-gcp (Ubuntu)
   Importance: Undecided
   Status: New

** Also affects: linux (Ubuntu Impish)
   Importance: Undecided
   Status: Invalid

** Also affects: linux-gcp (Ubuntu Impish)
   Importance: Undecided
   Status: New

** Also affects: linux-oracle (Ubuntu Impish)
   Importance: Undecided
   Status: New

** Changed in: linux-gcp (Ubuntu Impish)
   Status: New => In Progress

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-gcp in Ubuntu.
https://bugs.launchpad.net/bugs/1929455

Title:
  Hirsute update: v5.11.21 upstream stable release

Status in linux package in Ubuntu:
  Invalid
Status in linux-gcp package in Ubuntu:
  In Progress
Status in linux-oracle package in Ubuntu:
  New
Status in linux source package in Hirsute:
  Fix Committed
Status in linux-gcp source package in Hirsute:
  New
Status in linux-oracle source package in Hirsute:
  New
Status in linux source package in Impish:
  Invalid
Status in linux-gcp source package in Impish:
  In Progress
Status in linux-oracle source package in Impish:
  New

Bug description:
  SRU Justification

  Impact:
     The upstream process for stable tree updates is quite similar
     in scope to the Ubuntu SRU process, e.g., each patch has to
     demonstrably fix a bug, and each patch is vetted by upstream
     by originating either directly from a mainline/stable Linux tree or
     a minimally backported form of that patch. The following upstream
     stable patches should be included in the Ubuntu kernel:

     v5.11.21 upstream stable release
     from git://git.kernel.org/

  Bluetooth: verify AMP hci_chan before amp_destroy
  bluetooth: eliminate the potential race condition when removing the HCI 
controller
  net/nfc: fix use-after-free llcp_sock_bind/connect
  Revert "USB: cdc-acm: fix rounding error in TIOCSSERIAL"
  usb: roles: Call try_module_get() from usb_role_switch_find_by_fwnode()
  tty: moxa: fix TIOCSSERIAL jiffies conversions
  tty: amiserial: fix TIOCSSERIAL permission check
  USB: serial: usb_wwan: fix TIOCSSERIAL jiffies conversions
  staging: greybus: uart: fix TIOCSSERIAL jiffies conversions
  USB: serial: ti_usb_3410_5052: fix TIOCSSERIAL permission check
  staging: fwserial: fix TIOCSSERIAL jiffies conversions
  tty: moxa: fix TIOCSSERIAL permission check
  staging: fwserial: fix TIOCSSERIAL permission check
  drm: bridge: fix LONTIUM use of mipi_dsi_() functions
  usb: typec: tcpm: Address incorrect values of tcpm psy for fixed supply
  usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply
  usb: typec: tcpm: update power supply once partner accepts
  usb: xhci-mtk: remove or operator for setting schedule parameters
  usb: xhci-mtk: improve bandwidth scheduling with TT
  ASoC: samsung: tm2_wm5110: check of of_parse return value
  ASoC: Intel: kbl_da7219_max98927: Fix kabylake_ssp_fixup function
  ASoC: tlv320aic32x4: Register clocks before registering component
  ASoC: tlv320aic32x4: Increase maximum register in regmap
  MIPS: pci-mt7620: fix PLL lock check
  MIPS: pci-rt2880: fix slot 0 configuration
  FDDI: defxx: Bail out gracefully with unassigned PCI resource for CSR
  PCI: Allow VPD access for QLogic ISP2722
  KVM: x86: Defer the MMU unload to the normal path on an global INVPCID
  PCI: keystone: Let AM65 use the pci_ops defined in pcie-designware-host.c
  PM / devfreq: Unlock mutex and free devfreq struct in error path
  soc/tegra: regulators: Fix locking up when voltage-spread is out of range
  iio: inv_mpu6050: Fully validate gyro and accel scale writes
  iio: sx9310: Fix write_.._debounce()
  iio:accel:adis16201: Fix wrong axis assignment that prevents loading
  iio:adc:ad7476: Fix remove handling
  iio: sx9310: Fix access to variable DT array
  sc16is7xx: Defer probe if device read fails
  phy: cadence: Sierra: Fix PHY power_on sequence
  misc: lis3lv02d: Fix false-positive WARN on various HP models
  phy: ti: j721e-wiz: Invoke wiz_init() before of_platform_device_create()
  misc: vmw_vmci: explicitly initialize vmci_notify_bm_set_msg struct
  misc: vmw_vmci: explicitly initialize vmci_datagram payload
  selinux: add proper NULL termination to the secclass_map permissions
  x86, sched: Treat Intel SNC topology as default, COD as exception
  async_xor: increase src_offs when dropping destination page
  md/bitmap: wait for external bitmap writes to complete during tear down
  md-cluster: fix use-after-free issue when removing rdev
  md: split mddev_find
  md: factor out a mddev_find_locked helper from mddev_find
  md: md_open returns -EBUSY when entering racing area
  md: Fix missing unused status line of /proc/mdstat
  MIPS: generic: Update node names to avoid unit addresses
  mt76: mt7615: use ieee80211_free_txskb() in mt7615_tx_token_put()
  ipw2x00: potential buffer overflow in libipw_wx_set_encodeext()
  cfg80211: scan: drop entry from hidden_list on overflow
  rtw

[Kernel-packages] [Bug 1931106] Re: bnxt_en NIC driver crashes IO_PAGE_FAULT

2021-06-07 Thread aft2d

Did that, and after ~1 hour after I put them back in production 4 out of
5 servers I've upgraded to v5.13-rc5 crashed and the last after one more
hour.

For comaparison, with the old kernel version it occured ~2/3 times a week.
 
New syslog: https://pastebin.com/GWqtVaA3

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1931106

Title:
  bnxt_en NIC driver crashes IO_PAGE_FAULT

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Hi all,

  We received a bunch of new servers with a Supermicro H12SSL-NT
  mainboard that has an embedded Broadcom BCM57416 NIC.

  On all those servers we observe crashes of the NIC driver (bnxt_en)
  from time to time. We're not able to manually reproduce this issue, it
  just occurs at some point. Also our monitoring does not show any
  irregularities(high traffic flow or sth. like this).

  Syslog: https://pastebin.com/yDAyjHvF

  All servers are running with up-to-date packages:
  $ lsb_release -rd
  Description: Ubuntu 20.04.2 LTS
  Release: 20.04
  $ uname -r
  5.4.0-73-generic 

  It also happens on older kernel versions (tested 5.4.0-66) as well as
  the HWE kernel (tested 5.8.0-55).

  
  Thanks in advance.
  ~ Roman

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931106/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1810183] Re: numpad on touchpad doesn't work in ASUS Zenbook 14

2021-06-07 Thread dark0ghost

asus M433IA doesn`t work backlight
 OS: Parrot OS 4.11 x86_64 
 Host: VivoBook_ASUSLaptop X421IA_M433IA 1.0 
Kernel: 5.10.0-6parrot1-amd64 
sudo i2cdetect -l:
```
i2c-3   smbus   SMBus PIIX4 adapter port 1 at 0b20  SMBus adapter
i2c-1   smbus   SMBus PIIX4 adapter port 0 at 0b00  SMBus adapter
i2c-6   i2c AMDGPU DM aux hw bus 0  I2C adapter
i2c-4   i2c AMDGPU DM i2c hw bus 0  I2C adapter
i2c-2   smbus   SMBus PIIX4 adapter port 2 at 0b00  SMBus adapter
i2c-0   i2c Synopsys DesignWare I2C adapter I2C adapter
i2c-5   i2c AMDGPU DM i2c hw bus 1  I2C adapter
```

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1810183

Title:
  numpad on touchpad doesn't work in ASUS Zenbook 14

Status in Linux:
  New
Status in linux package in Ubuntu:
  Confirmed

Bug description:
  I have Asus Zenbook 14 UX433FA which I have installed Ubuntu 18.10 alongside 
windows 10. 
  The numeric keypads are within the touchpad and are supposed to be turned on 
by a button on the touchpad. This works well in Windows but doesn't work in 
Ubuntu. 
  I have tried to search for any related problems/solutions online but I 
haven't been able to.
  I will appreciate any suggestion or help.
  Thanks,
  --- 
  ProblemType: Bug
  ApportVersion: 2.20.10-0ubuntu13.1
  Architecture: amd64
  CurrentDesktop: ubuntu:GNOME
  DistroRelease: Ubuntu 18.10
  InstallationDate: Installed on 2018-12-30 (4 days ago)
  InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 
(20181017.3)
  Package: linux (not installed)
  Tags:  cosmic
  Uname: Linux 4.19.11-041911-generic x86_64
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  --- 
  ProblemType: Bug
  ApportVersion: 2.20.10-0ubuntu13.1
  Architecture: amd64
  CurrentDesktop: ubuntu:GNOME
  DistroRelease: Ubuntu 18.10
  InstallationDate: Installed on 2018-12-30 (4 days ago)
  InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 
(20181017.3)
  Package: linux (not installed)
  Tags:  cosmic
  Uname: Linux 4.18.10-041810-generic x86_64
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/1810183/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1931158] [NEW] Focal update: v5.4.121 upstream stable release

Public bug reported:


SRU Justification

Impact:
   The upstream process for stable tree updates is quite similar
   in scope to the Ubuntu SRU process, e.g., each patch has to
   demonstrably fix a bug, and each patch is vetted by upstream
   by originating either directly from a mainline/stable Linux tree or
   a minimally backported form of that patch. The following upstream
   stable patches should be included in the Ubuntu kernel:

   v5.4.121 upstream stable release
   from git://git.kernel.org/

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: Invalid

** Affects: linux (Ubuntu Focal)
 Importance: Medium
 Assignee: Kamal Mostafa (kamalmostafa)
 Status: In Progress


** Tags: kernel-stable-tracking-bug

** Changed in: linux (Ubuntu)
   Status: New => Confirmed

** Tags added: kernel-stable-tracking-bug

** Also affects: linux (Ubuntu Focal)
   Importance: Undecided
   Status: New

** Changed in: linux (Ubuntu Focal)
   Status: New => In Progress

** Changed in: linux (Ubuntu Focal)
   Importance: Undecided => Medium

** Changed in: linux (Ubuntu Focal)
 Assignee: (unassigned) => Kamal Mostafa (kamalmostafa)

** Changed in: linux (Ubuntu)
   Status: Confirmed => Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1931158

Title:
  Focal update: v5.4.121 upstream stable release

Status in linux package in Ubuntu:
  Invalid
Status in linux source package in Focal:
  In Progress

Bug description:
  
  SRU Justification

  Impact:
 The upstream process for stable tree updates is quite similar
 in scope to the Ubuntu SRU process, e.g., each patch has to
 demonstrably fix a bug, and each patch is vetted by upstream
 by originating either directly from a mainline/stable Linux tree or
 a minimally backported form of that patch. The following upstream
 stable patches should be included in the Ubuntu kernel:

 v5.4.121 upstream stable release
 from git://git.kernel.org/

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931158/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1931158] Re: Focal update: v5.4.121 upstream stable release

** Description changed:

+ SRU Justification
  
- SRU Justification
+ Impact:
+    The upstream process for stable tree updates is quite similar
+    in scope to the Ubuntu SRU process, e.g., each patch has to
+    demonstrably fix a bug, and each patch is vetted by upstream
+    by originating either directly from a mainline/stable Linux tree or
+    a minimally backported form of that patch. The following upstream
+    stable patches should be included in the Ubuntu kernel:
  
- Impact:
-The upstream process for stable tree updates is quite similar
-in scope to the Ubuntu SRU process, e.g., each patch has to
-demonstrably fix a bug, and each patch is vetted by upstream
-by originating either directly from a mainline/stable Linux tree or
-a minimally backported form of that patch. The following upstream
-stable patches should be included in the Ubuntu kernel:
+    v5.4.121 upstream stable release
+    from git://git.kernel.org/
  
-v5.4.121 upstream stable release
-from git://git.kernel.org/
+ x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes
+ kgdb: fix gcc-11 warning on indentation
+ usb: sl811-hcd: improve misleading indentation
+ cxgb4: Fix the -Wmisleading-indentation warning
+ isdn: capi: fix mismatched prototypes
+ pinctrl: ingenic: Improve unreachable code generation
+ xsk: Simplify detection of empty and full rings
+ virtio_net: Do not pull payload in skb->head
+ PCI: thunder: Fix compile testing
+ dmaengine: dw-edma: Fix crash on loading/unloading driver
+ ARM: 9066/1: ftrace: pause/unpause function graph tracer in cpu_suspend()
+ ACPI / hotplug / PCI: Fix reference count leak in enable_slot()
+ Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated 
devices
+ Input: silead - add workaround for x86 BIOS-es which bring the chip up in a 
stuck state
+ um: Mark all kernel symbols as local
+ um: Disable CONFIG_GCOV with MODULES
+ ARM: 9075/1: kernel: Fix interrupted SMC calls
+ scripts/recordmcount.pl: Fix RISC-V regex for clang
+ riscv: Workaround mcount name prior to clang-13
+ scsi: lpfc: Fix illegal memory access on Abort IOCBs
+ ceph: fix fscache invalidation
+ scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found
+ bridge: Fix possible races between assigning rx_handler_data and setting 
IFF_BRIDGE_PORT bit
+ drm/amd/display: Fix two cursor duplication when using overlay
+ gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055
+ ALSA: hda: generic: change the DAC ctl name for LO+SPK or LO+HP
+ block: reexpand iov_iter after read/write
+ lib: stackdepot: turn depot_lock spinlock to raw_spinlock
+ net: stmmac: Do not enable RX FIFO overflow interrupts
+ ip6_gre: proper dev_{hold|put} in ndo_[un]init methods
+ sit: proper dev_{hold|put} in ndo_[un]init methods
+ ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods
+ ipv6: remove extra dev_hold() for fallback tunnels
+ KVM: arm64: Initialize VCPU mdcr_el2 before loading it
+ tweewide: Fix most Shebang lines
+ scripts: switch explicitly to Python 3
+ Linux 5.4.121
+ UBUNTU: upstream stable to v5.4.121

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1931158

Title:
  Focal update: v5.4.121 upstream stable release

Status in linux package in Ubuntu:
  Invalid
Status in linux source package in Focal:
  In Progress

Bug description:
  SRU Justification

  Impact:
     The upstream process for stable tree updates is quite similar
     in scope to the Ubuntu SRU process, e.g., each patch has to
     demonstrably fix a bug, and each patch is vetted by upstream
     by originating either directly from a mainline/stable Linux tree or
     a minimally backported form of that patch. The following upstream
     stable patches should be included in the Ubuntu kernel:

     v5.4.121 upstream stable release
     from git://git.kernel.org/

  x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes
  kgdb: fix gcc-11 warning on indentation
  usb: sl811-hcd: improve misleading indentation
  cxgb4: Fix the -Wmisleading-indentation warning
  isdn: capi: fix mismatched prototypes
  pinctrl: ingenic: Improve unreachable code generation
  xsk: Simplify detection of empty and full rings
  virtio_net: Do not pull payload in skb->head
  PCI: thunder: Fix compile testing
  dmaengine: dw-edma: Fix crash on loading/unloading driver
  ARM: 9066/1: ftrace: pause/unpause function graph tracer in cpu_suspend()
  ACPI / hotplug / PCI: Fix reference count leak in enable_slot()
  Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated 
devices
  Input: silead - add workaround for x86 BIOS-es which bring the chip up in a 
stuck state
  um: Mark all kernel symbols as local
  um: Disable CONFIG_GCOV with MODULES
  ARM: 9075/1: kernel: Fix interrupted SMC cal

[Kernel-packages] [Bug 1930733] Re: Kernel oops with the 460.80 and 465.27 drivers when using DP, but not with HDMI

2021-06-07 Thread Sønke Lorenzen

The nvidia-driver-460-server packages in the Ubuntu repositries are on 460.73.01
I installed those, and disconnected my monitor from HDMI and connected with 
DisplayPort instead.

This seems to work without problems.

What is the purpose of the server packages?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to nvidia-graphics-drivers-460 in Ubuntu.
https://bugs.launchpad.net/bugs/1930733

Title:
  Kernel oops with the 460.80 and 465.27 drivers when using DP, but not
  with HDMI

Status in nvidia-graphics-drivers-460 package in Ubuntu:
  Triaged
Status in nvidia-graphics-drivers-465 package in Ubuntu:
  Triaged

Bug description:
  I get a kernel oops with the 460.80 and 465.27 drivers on Hirsute

  Jun 03 16:26:57 willow kernel: Oops:  [#1] SMP PTI
  Jun 03 16:26:57 willow kernel: CPU: 7 PID: 2004 Comm: Xorg Tainted: P 
  OE 5.11.0-18-generic #19-Ubuntu
  Jun 03 16:26:57 willow kernel: Hardware name: System manufacturer System 
Product Name/PRIME H270M-PLUS, BIOS 1605 12/13/2019
  Jun 03 16:26:57 willow kernel: RIP: 0010:_nv015534rm+0x1b6/0x330 [nvidia]
  Jun 03 16:26:57 willow kernel: Code: 8b 87 68 05 00 00 ba 01 00 00 00 be 02 
00 00 00 e8 bf eb 55 c8 41 83 c5 01 41 83 fd 1f 0f 84 0b 01 00 00 48 8b 45 10 
44 89 ee <48> 8b b8 70 01 00 00 48 8b 87 d8 04 00 00 e8>
  Jun 03 16:26:57 willow kernel: RSP: :af4201893958 EFLAGS: 00010297
  Jun 03 16:26:57 willow kernel: RAX:  RBX: 0400 
RCX: 0003
  Jun 03 16:26:57 willow kernel: RDX: 0004 RSI: 0003 
RDI: 
  Jun 03 16:26:57 willow kernel: RBP: 8e318220add0 R08: 0001 
R09: 8e318220acb8
  Jun 03 16:26:57 willow kernel: R10: 8e3182204008 R11: 1010 
R12: 0400
  Jun 03 16:26:57 willow kernel: R13: 0003 R14: 8e3186ca8010 
R15: 0800
  Jun 03 16:26:57 willow kernel: FS:  7f5807f38a40() 
GS:8e3466dc() knlGS:
  Jun 03 16:26:57 willow kernel: CS:  0010 DS:  ES:  CR0: 
80050033
  Jun 03 16:26:57 willow kernel: CR2: 0170 CR3: 000140710005 
CR4: 003706e0
  Jun 03 16:26:57 willow kernel: DR0:  DR1:  
DR2: 
  Jun 03 16:26:57 willow kernel: DR3:  DR6: fffe0ff0 
DR7: 0400
  Jun 03 16:26:57 willow kernel: Call Trace:
  Jun 03 16:26:57 willow kernel:  ? _nv015556rm+0x7fd/0x1020 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv027155rm+0x22c/0x4f0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv017787rm+0x303/0x5e0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv017789rm+0xe1/0x220 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv022829rm+0xed/0x220 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv023065rm+0x30/0x60 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? _nv000704rm+0x16da/0x22b0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? rm_init_adapter+0xc5/0xe0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? nv_open_device+0x122/0x8e0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? nvidia_open+0x2b7/0x560 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? nvidia_frontend_open+0x58/0xa0 [nvidia]
  Jun 03 16:26:57 willow kernel:  ? chrdev_open+0xf7/0x220
  Jun 03 16:26:57 willow kernel:  ? cdev_device_add+0x90/0x90
  Jun 03 16:26:57 willow kernel:  ? do_dentry_open+0x156/0x370
  Jun 03 16:26:57 willow kernel:  ? vfs_open+0x2d/0x30
  Jun 03 16:26:57 willow kernel:  ? do_open+0x1c3/0x340
  Jun 03 16:26:57 willow kernel:  ? path_openat+0x10a/0x1d0
  Jun 03 16:26:57 willow kernel:  ? do_filp_open+0x8c/0x130
  Jun 03 16:26:57 willow kernel:  ? __check_object_size+0x1c/0x20
  Jun 03 16:26:57 willow kernel:  ? do_sys_openat2+0x9b/0x150
  Jun 03 16:26:57 willow kernel:  ? __x64_sys_openat+0x56/0x90
  Jun 03 16:26:57 willow kernel:  ? do_syscall_64+0x38/0x90
  Jun 03 16:26:57 willow kernel:  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
  Jun 03 16:26:57 willow kernel: Modules linked in: snd_seq_dummy snd_hrtimer 
vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) binfmt_misc zfs(PO) zunicode(PO) 
zzstd(O) zlua(O) zavl(PO) icp(PO) zcommon(PO) znvpair(PO) >
  Jun 03 16:26:57 willow kernel:  sunrpc ip_tables x_tables autofs4 btrfs 
blake2b_generic xor raid6_pq libcrc32c hid_generic usbhid hid crct10dif_pclmul 
crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd c>
  Jun 03 16:26:57 willow kernel: CR2: 0170
  Jun 03 16:26:57 willow kernel: ---[ end trace 0013b6989b267f32 ]---
  Jun 03 16:26:57 willow kernel: RIP: 0010:_nv015534rm+0x1b6/0x330 [nvidia]
  Jun 03 16:26:57 willow kernel: Code: 8b 87 68 05 00 00 ba 01 00 00 00 be 02 
00 00 00 e8 bf eb 55 c8 41 83 c5 01 41 83 fd 1f 0f 84 0b 01 00 00 48 8b 45 10 
44 89 ee <48> 8b b8 70 01 00 00 48 8b 87 d8 04 00 00 e8>
  Jun 03 16:26:57 willow kernel: RSP: :af4201893958 EFLAGS: 00010297
  Jun 03 16:26:57 willow kernel: RAX:  RBX: 0400 
RCX: 0

[Kernel-packages] [Bug 1931159] [NEW] Focal update: v5.4.122 upstream stable release

Public bug reported:

SRU Justification

Impact:
   The upstream process for stable tree updates is quite similar
   in scope to the Ubuntu SRU process, e.g., each patch has to
   demonstrably fix a bug, and each patch is vetted by upstream
   by originating either directly from a mainline/stable Linux tree or
   a minimally backported form of that patch. The following upstream
   stable patches should be included in the Ubuntu kernel:

   v5.4.122 upstream stable release
   from git://git.kernel.org/

firmware: arm_scpi: Prevent the ternary sign expansion bug
openrisc: Fix a memory leak
RDMA/siw: Properly check send and receive CQ pointers
RDMA/siw: Release xarray entry
RDMA/rxe: Clear all QP fields if creation failed
scsi: ufs: core: Increase the usable queue depth
scsi: qla2xxx: Fix error return code in qla82xx_write_flash_dword()
RDMA/mlx5: Recover from fatal event in dual port mode
RDMA/core: Don't access cm_id after its destruction
platform/mellanox: mlxbf-tmfifo: Fix a memory barrier issue
platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios
RDMA/uverbs: Fix a NULL vs IS_ERR() bug
ptrace: make ptrace() fail if the tracee changed its pid unexpectedly
nvmet: seset ns->file when open fails
locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal
btrfs: avoid RCU stalls while running delayed iputs
cifs: fix memory leak in smb2_copychunk_range
ALSA: dice: fix stream format for TC Electronic Konnekt Live at high sampling 
transfer frequency
ALSA: intel8x0: Don't update period unless prepared
ALSA: line6: Fix racy initialization of LINE6 MIDI
ALSA: dice: fix stream format at middle sampling rate for Alesis iO 26
ALSA: firewire-lib: fix calculation for size of IR context payload
ALSA: usb-audio: Validate MS endpoint descriptors
ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro
ALSA: hda: fixup headset for ASUS GU502 laptop
Revert "ALSA: sb8: add a check for request_region"
ALSA: firewire-lib: fix check for the size of isochronous packet payload
ALSA: hda/realtek: reset eapd coeff to default value for alc287
ALSA: hda/realtek: Add some CLOVE SSIDs of ALC293
ALSA: hda/realtek: Fix silent headphone output on ASUS UX430UA
ALSA: hda/realtek: Add fixup for HP OMEN laptop
ALSA: hda/realtek: Add fixup for HP Spectre x360 15-df0xxx
uio_hv_generic: Fix a memory leak in error handling paths
Revert "rapidio: fix a NULL pointer dereference when create_workqueue() fails"
rapidio: handle create_workqueue() failure
Revert "serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference"
drm/amdgpu: disable 3DCGCG on picasso/raven1 to avoid compute hang
drm/amdgpu: update gc golden setting for Navi12
drm/amdgpu: update sdma golden setting for Navi12
mmc: sdhci-pci-gli: increase 1.8V regulator wait
xen-pciback: reconfigure also from backend watch handler
dm snapshot: fix crash with transient storage and zero chunk size
Revert "video: hgafb: fix potential NULL pointer dereference"
Revert "net: stmicro: fix a missing check of clk_prepare"
Revert "leds: lp5523: fix a missing check of return value of lp55xx_read"
Revert "hwmon: (lm80) fix a missing check of bus read in lm80 probe"
Revert "video: imsttfb: fix potential NULL pointer dereferences"
Revert "ecryptfs: replace BUG_ON with error handling code"
Revert "scsi: ufs: fix a missing check of devm_reset_control_get"
Revert "gdrom: fix a memory leak bug"
cdrom: gdrom: deallocate struct gdrom_unit fields in remove_gdrom
cdrom: gdrom: initialize global variable at init time
Revert "media: rcar_drif: fix a memory disclosure"
Revert "rtlwifi: fix a potential NULL pointer dereference"
Revert "qlcnic: Avoid potential NULL pointer dereference"
Revert "niu: fix missing checks of niu_pci_eeprom_read"
ethernet: sun: niu: fix missing checks of niu_pci_eeprom_read()
net: stmicro: handle clk_prepare() failure during init
scsi: ufs: handle cleanup correctly on devm_reset_control_get error
net: rtlwifi: properly check for alloc_workqueue() failure
ics932s401: fix broken handling of errors when word reading fails
leds: lp5523: check return value of lp5xx_read and jump to cleanup code
qlcnic: Add null check after calling netdev_alloc_skb
video: hgafb: fix potential NULL pointer dereference
vgacon: Record video mode changes with VT_RESIZEX
vt: Fix character height handling with VT_RESIZEX
tty: vt: always invoke vc->vc_sw->con_resize callback
nvme-multipath: fix double initialization of ANA state
ext4: fix error handling in ext4_end_enable_verity()
Bluetooth: L2CAP: Fix handling LE modes by L2CAP_OPTIONS
nvmet: use new ana_log_size instead the old one
video: hgafb: correctly handle card detect failure during probe
Bluetooth: SMP: Fail if remote and local public keys are identical
Linux 5.4.122
UBUNTU: upstream stable to v5.4.122

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: Invalid

** Affects: linux (Ubuntu Focal)
 Importance: Medium
 Assignee: Kamal Mostafa (kamalmostafa)
 Status: In Prog

[Kernel-packages] [Bug 1931159] Re: Focal update: v5.4.122 upstream stable release

** Description changed:

+ SRU Justification
  
- SRU Justification
+ Impact:
+    The upstream process for stable tree updates is quite similar
+    in scope to the Ubuntu SRU process, e.g., each patch has to
+    demonstrably fix a bug, and each patch is vetted by upstream
+    by originating either directly from a mainline/stable Linux tree or
+    a minimally backported form of that patch. The following upstream
+    stable patches should be included in the Ubuntu kernel:
  
- Impact:
-The upstream process for stable tree updates is quite similar
-in scope to the Ubuntu SRU process, e.g., each patch has to
-demonstrably fix a bug, and each patch is vetted by upstream
-by originating either directly from a mainline/stable Linux tree or
-a minimally backported form of that patch. The following upstream
-stable patches should be included in the Ubuntu kernel:
+    v5.4.122 upstream stable release
+    from git://git.kernel.org/
  
-v5.4.122 upstream stable release
-from git://git.kernel.org/
+ firmware: arm_scpi: Prevent the ternary sign expansion bug
+ openrisc: Fix a memory leak
+ RDMA/siw: Properly check send and receive CQ pointers
+ RDMA/siw: Release xarray entry
+ RDMA/rxe: Clear all QP fields if creation failed
+ scsi: ufs: core: Increase the usable queue depth
+ scsi: qla2xxx: Fix error return code in qla82xx_write_flash_dword()
+ RDMA/mlx5: Recover from fatal event in dual port mode
+ RDMA/core: Don't access cm_id after its destruction
+ platform/mellanox: mlxbf-tmfifo: Fix a memory barrier issue
+ platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios
+ RDMA/uverbs: Fix a NULL vs IS_ERR() bug
+ ptrace: make ptrace() fail if the tracee changed its pid unexpectedly
+ nvmet: seset ns->file when open fails
+ locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal
+ btrfs: avoid RCU stalls while running delayed iputs
+ cifs: fix memory leak in smb2_copychunk_range
+ ALSA: dice: fix stream format for TC Electronic Konnekt Live at high sampling 
transfer frequency
+ ALSA: intel8x0: Don't update period unless prepared
+ ALSA: line6: Fix racy initialization of LINE6 MIDI
+ ALSA: dice: fix stream format at middle sampling rate for Alesis iO 26
+ ALSA: firewire-lib: fix calculation for size of IR context payload
+ ALSA: usb-audio: Validate MS endpoint descriptors
+ ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro
+ ALSA: hda: fixup headset for ASUS GU502 laptop
+ Revert "ALSA: sb8: add a check for request_region"
+ ALSA: firewire-lib: fix check for the size of isochronous packet payload
+ ALSA: hda/realtek: reset eapd coeff to default value for alc287
+ ALSA: hda/realtek: Add some CLOVE SSIDs of ALC293
+ ALSA: hda/realtek: Fix silent headphone output on ASUS UX430UA
+ ALSA: hda/realtek: Add fixup for HP OMEN laptop
+ ALSA: hda/realtek: Add fixup for HP Spectre x360 15-df0xxx
+ uio_hv_generic: Fix a memory leak in error handling paths
+ Revert "rapidio: fix a NULL pointer dereference when create_workqueue() fails"
+ rapidio: handle create_workqueue() failure
+ Revert "serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference"
+ drm/amdgpu: disable 3DCGCG on picasso/raven1 to avoid compute hang
+ drm/amdgpu: update gc golden setting for Navi12
+ drm/amdgpu: update sdma golden setting for Navi12
+ mmc: sdhci-pci-gli: increase 1.8V regulator wait
+ xen-pciback: reconfigure also from backend watch handler
+ dm snapshot: fix crash with transient storage and zero chunk size
+ Revert "video: hgafb: fix potential NULL pointer dereference"
+ Revert "net: stmicro: fix a missing check of clk_prepare"
+ Revert "leds: lp5523: fix a missing check of return value of lp55xx_read"
+ Revert "hwmon: (lm80) fix a missing check of bus read in lm80 probe"
+ Revert "video: imsttfb: fix potential NULL pointer dereferences"
+ Revert "ecryptfs: replace BUG_ON with error handling code"
+ Revert "scsi: ufs: fix a missing check of devm_reset_control_get"
+ Revert "gdrom: fix a memory leak bug"
+ cdrom: gdrom: deallocate struct gdrom_unit fields in remove_gdrom
+ cdrom: gdrom: initialize global variable at init time
+ Revert "media: rcar_drif: fix a memory disclosure"
+ Revert "rtlwifi: fix a potential NULL pointer dereference"
+ Revert "qlcnic: Avoid potential NULL pointer dereference"
+ Revert "niu: fix missing checks of niu_pci_eeprom_read"
+ ethernet: sun: niu: fix missing checks of niu_pci_eeprom_read()
+ net: stmicro: handle clk_prepare() failure during init
+ scsi: ufs: handle cleanup correctly on devm_reset_control_get error
+ net: rtlwifi: properly check for alloc_workqueue() failure
+ ics932s401: fix broken handling of errors when word reading fails
+ leds: lp5523: check return value of lp5xx_read and jump to cleanup code
+ qlcnic: Add null check after calling netdev_alloc_skb
+ video: hgafb: fix potential NULL pointer dereference
+ vgacon: Record video mode changes with VT_RESIZEX
+

[Kernel-packages] [Bug 1929657] system.journal

--- Comment (attachment only) From mario.alberto.gali...@ibm.com 2021-06-07 
14:39 EDT---


** Attachment added: "system.journal"
   
https://bugs.launchpad.net/bugs/1929657/+attachment/5502962/+files/system.journal.zip

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1929657

Title:
  [Ubuntu 20.4.2]  vLan not getting static IP assigned (on s390x)

Status in Ubuntu on IBM z Systems:
  Incomplete
Status in linux package in Ubuntu:
  New
Status in netplan.io package in Ubuntu:
  New

Bug description:
  ---Problem Description---
  Doing vLAN configuration one of the vLANs is not getting static IP assigned 
when the rest are workin without problems
   
  Contact Information = Mario Alvarado/mario.alberto.gali...@ibm.com 
   
  ---uname output---
  Linux ilabg13.tuc.stglabs.ibm.com 5.4.0-73-generic #82-Ubuntu SMP Wed Apr 14 
17:29:32 UTC 2021 s390x s390x s390x GNU/Linux
   
  Machine Type = z15 
   
  ---Debugger---
  A debugger is not configured
   
  ---Steps to Reproduce---
   1)Configure the netplan file as follow:
  root@ilabg13:~# cat /etc/netplan/01-iscsi-config.yaml

  # This is the network config written by 'subiquity'

  network:

ethernets:

  encdb0:

addresses:

- 11.111.114.213/22

macaddress: 02:76:54:00:00:03

  encdc0:

addresses:

- 11.111.112.213/22

macaddress: 02:76:54:00:00:04

  enP50s3832 :

addresses:

- 11.111.112.214/22

  enP53p0s0:

addresses:

- 11.111.112.215/22

vlans:

  encdb0.160:

id: 160

link: encdb0

mtu: 9000

addresses:

- 192.168.160.53/24

  encdc0.150:

id: 150

link: encdc0

mtu: 9000

addresses:

- 192.168.150.53/24

  enP50s3832.170:

id: 170

link: enP50s3832

mtu: 9000

addresses:

- 192.168.170.53/24

  enP53p0s0.171:

id: 171

link: enP53p0s0

mtu: 9000

addresses:

- 192.168.171.53/24

version: 2

  2)run net plan apply:
  root@ilabg13:~# netplan --debug apply

  ** (generate:59965): DEBUG: 14:55:15.046: Processing input file
  /etc/netplan/00-installer-config.yaml..

  ** (generate:59965): DEBUG: 14:55:15.046: starting new processing pass

  ** (generate:59965): DEBUG: 14:55:15.046: Processing input file
  /etc/netplan/01-iscsi-config.yaml..

  ** (generate:59965): DEBUG: 14:55:15.046: starting new processing pass

  ** (generate:59965): DEBUG: 14:55:15.046: We have some netdefs, pass
  them through a final round of validation

  ** (generate:59965): DEBUG: 14:55:15.046: encdc0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdb0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: ence0f: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdb0.160: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP50s3832: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP53p0s0.171: setting
  default backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP50s3832.170: setting
  default backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP53p0s0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdc0.150: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.047: Generating output files..

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  ence0f is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  ence0f is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  encdb0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  encdb0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  encdc0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  encdc0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  enP50s3832 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition

[Kernel-packages] [Bug 1931160] [NEW] Focal update: v5.4.123 upstream stable release

Public bug reported:

SRU Justification

Impact:
   The upstream process for stable tree updates is quite similar
   in scope to the Ubuntu SRU process, e.g., each patch has to
   demonstrably fix a bug, and each patch is vetted by upstream
   by originating either directly from a mainline/stable Linux tree or
   a minimally backported form of that patch. The following upstream
   stable patches should be included in the Ubuntu kernel:

   v5.4.123 upstream stable release
   from git://git.kernel.org/

usb: dwc3: gadget: Enable suspend events
perf unwind: Fix separate debug info files when using elfutils' libdw's unwinder
perf unwind: Set userdata for all __report_module() paths
NFC: nci: fix memory leak in nci_allocate_device
Linux 5.4.123
UBUNTU: upstream stable to v5.4.123

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: Invalid

** Affects: linux (Ubuntu Focal)
 Importance: Medium
 Assignee: Kamal Mostafa (kamalmostafa)
 Status: In Progress


** Tags: kernel-stable-tracking-bug

** Changed in: linux (Ubuntu)
   Status: New => Confirmed

** Tags added: kernel-stable-tracking-bug

** Also affects: linux (Ubuntu Focal)
   Importance: Undecided
   Status: New

** Changed in: linux (Ubuntu Focal)
   Status: New => In Progress

** Changed in: linux (Ubuntu Focal)
   Importance: Undecided => Medium

** Changed in: linux (Ubuntu Focal)
 Assignee: (unassigned) => Kamal Mostafa (kamalmostafa)

** Changed in: linux (Ubuntu)
   Status: Confirmed => Invalid

** Description changed:

+ SRU Justification
  
- SRU Justification
+ Impact:
+    The upstream process for stable tree updates is quite similar
+    in scope to the Ubuntu SRU process, e.g., each patch has to
+    demonstrably fix a bug, and each patch is vetted by upstream
+    by originating either directly from a mainline/stable Linux tree or
+    a minimally backported form of that patch. The following upstream
+    stable patches should be included in the Ubuntu kernel:
  
- Impact:
-The upstream process for stable tree updates is quite similar
-in scope to the Ubuntu SRU process, e.g., each patch has to
-demonstrably fix a bug, and each patch is vetted by upstream
-by originating either directly from a mainline/stable Linux tree or
-a minimally backported form of that patch. The following upstream
-stable patches should be included in the Ubuntu kernel:
+    v5.4.123 upstream stable release
+    from git://git.kernel.org/
  
-v5.4.123 upstream stable release
-from git://git.kernel.org/
+ usb: dwc3: gadget: Enable suspend events
+ perf unwind: Fix separate debug info files when using elfutils' libdw's 
unwinder
+ perf unwind: Set userdata for all __report_module() paths
+ NFC: nci: fix memory leak in nci_allocate_device
+ Linux 5.4.123
+ UBUNTU: upstream stable to v5.4.123

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1931160

Title:
  Focal update: v5.4.123 upstream stable release

Status in linux package in Ubuntu:
  Invalid
Status in linux source package in Focal:
  In Progress

Bug description:
  SRU Justification

  Impact:
     The upstream process for stable tree updates is quite similar
     in scope to the Ubuntu SRU process, e.g., each patch has to
     demonstrably fix a bug, and each patch is vetted by upstream
     by originating either directly from a mainline/stable Linux tree or
     a minimally backported form of that patch. The following upstream
     stable patches should be included in the Ubuntu kernel:

     v5.4.123 upstream stable release
     from git://git.kernel.org/

  usb: dwc3: gadget: Enable suspend events
  perf unwind: Fix separate debug info files when using elfutils' libdw's 
unwinder
  perf unwind: Set userdata for all __report_module() paths
  NFC: nci: fix memory leak in nci_allocate_device
  Linux 5.4.123
  UBUNTU: upstream stable to v5.4.123

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931160/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1929657] Comment bridged from LTC Bugzilla

--- Comment From mario.alberto.gali...@ibm.com 2021-06-07 14:49 EDT---
Compressed and attached system.journal.

Frank,
I have other systems with similar configurations but not exactly the same. It 
is another ubuntu host but Native linux installed in its own Lpar, and have 
some other hosts in a zVM bug with different OS.
All of them with 2 OSA adapters and 2 RoCE.

This is the first time that this issue is seen we have being using this
host for at least 6 moths without doing OS reinstallation or changing
the adapters and was working correctly.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1929657

Title:
  [Ubuntu 20.4.2]  vLan not getting static IP assigned (on s390x)

Status in Ubuntu on IBM z Systems:
  Incomplete
Status in linux package in Ubuntu:
  New
Status in netplan.io package in Ubuntu:
  New

Bug description:
  ---Problem Description---
  Doing vLAN configuration one of the vLANs is not getting static IP assigned 
when the rest are workin without problems
   
  Contact Information = Mario Alvarado/mario.alberto.gali...@ibm.com 
   
  ---uname output---
  Linux ilabg13.tuc.stglabs.ibm.com 5.4.0-73-generic #82-Ubuntu SMP Wed Apr 14 
17:29:32 UTC 2021 s390x s390x s390x GNU/Linux
   
  Machine Type = z15 
   
  ---Debugger---
  A debugger is not configured
   
  ---Steps to Reproduce---
   1)Configure the netplan file as follow:
  root@ilabg13:~# cat /etc/netplan/01-iscsi-config.yaml

  # This is the network config written by 'subiquity'

  network:

ethernets:

  encdb0:

addresses:

- 11.111.114.213/22

macaddress: 02:76:54:00:00:03

  encdc0:

addresses:

- 11.111.112.213/22

macaddress: 02:76:54:00:00:04

  enP50s3832 :

addresses:

- 11.111.112.214/22

  enP53p0s0:

addresses:

- 11.111.112.215/22

vlans:

  encdb0.160:

id: 160

link: encdb0

mtu: 9000

addresses:

- 192.168.160.53/24

  encdc0.150:

id: 150

link: encdc0

mtu: 9000

addresses:

- 192.168.150.53/24

  enP50s3832.170:

id: 170

link: enP50s3832

mtu: 9000

addresses:

- 192.168.170.53/24

  enP53p0s0.171:

id: 171

link: enP53p0s0

mtu: 9000

addresses:

- 192.168.171.53/24

version: 2

  2)run net plan apply:
  root@ilabg13:~# netplan --debug apply

  ** (generate:59965): DEBUG: 14:55:15.046: Processing input file
  /etc/netplan/00-installer-config.yaml..

  ** (generate:59965): DEBUG: 14:55:15.046: starting new processing pass

  ** (generate:59965): DEBUG: 14:55:15.046: Processing input file
  /etc/netplan/01-iscsi-config.yaml..

  ** (generate:59965): DEBUG: 14:55:15.046: starting new processing pass

  ** (generate:59965): DEBUG: 14:55:15.046: We have some netdefs, pass
  them through a final round of validation

  ** (generate:59965): DEBUG: 14:55:15.046: encdc0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdb0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: ence0f: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdb0.160: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP50s3832: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP53p0s0.171: setting
  default backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP50s3832.170: setting
  default backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP53p0s0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdc0.150: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.047: Generating output files..

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  ence0f is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  ence0f is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  encdb0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  encdb0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: def

[Kernel-packages] [Bug 1929657] Re: [Ubuntu 20.4.2] vLan not getting static IP assigned (on s390x)

2021-06-07 Thread Frank Heimes

Hi Mario, so did I got it right that this is the only one out of multiple 
systems with a similar config that has this problem - on a ROcE interface with 
vlan?
Did you modified expanded the device config of that system over time (with more 
OSA or more RoCE devices) or was it untouched after initial installation? 
(Well, I think at least regular updates were done ...)
Are all these systems with RoCE v2.x devices?

What happens if you try to set the IP via the ip command?

Well, I just configured all RoCE devices that I have on this LPAR for vlan 
usage and assigned IP addresses to the base and vlan interface with the help of 
the ip command, which worked:
ip a | grep "192.168.1.20"
inet 192.168.1.201/24 scope global enP1p0s0
inet 192.168.1.203/24 scope global enP1p0s0d1
inet 192.168.1.205/24 scope global enP2p0s0
inet 192.168.1.207/24 scope global enP2p0s0d1
inet 192.168.1.202/24 scope global enP1p0s0.1234
inet 192.168.1.204/24 scope global enP1p0s0d1.1234
inet 192.168.1.206/24 scope global enP2p0s0.1234
inet 192.168.1.208/24 scope global enP2p0s0d1.1234
Next: transfer this config to the netplan yaml ...

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1929657

Title:
  [Ubuntu 20.4.2]  vLan not getting static IP assigned (on s390x)

Status in Ubuntu on IBM z Systems:
  Incomplete
Status in linux package in Ubuntu:
  New
Status in netplan.io package in Ubuntu:
  New

Bug description:
  ---Problem Description---
  Doing vLAN configuration one of the vLANs is not getting static IP assigned 
when the rest are workin without problems
   
  Contact Information = Mario Alvarado/mario.alberto.gali...@ibm.com 
   
  ---uname output---
  Linux ilabg13.tuc.stglabs.ibm.com 5.4.0-73-generic #82-Ubuntu SMP Wed Apr 14 
17:29:32 UTC 2021 s390x s390x s390x GNU/Linux
   
  Machine Type = z15 
   
  ---Debugger---
  A debugger is not configured
   
  ---Steps to Reproduce---
   1)Configure the netplan file as follow:
  root@ilabg13:~# cat /etc/netplan/01-iscsi-config.yaml

  # This is the network config written by 'subiquity'

  network:

ethernets:

  encdb0:

addresses:

- 11.111.114.213/22

macaddress: 02:76:54:00:00:03

  encdc0:

addresses:

- 11.111.112.213/22

macaddress: 02:76:54:00:00:04

  enP50s3832 :

addresses:

- 11.111.112.214/22

  enP53p0s0:

addresses:

- 11.111.112.215/22

vlans:

  encdb0.160:

id: 160

link: encdb0

mtu: 9000

addresses:

- 192.168.160.53/24

  encdc0.150:

id: 150

link: encdc0

mtu: 9000

addresses:

- 192.168.150.53/24

  enP50s3832.170:

id: 170

link: enP50s3832

mtu: 9000

addresses:

- 192.168.170.53/24

  enP53p0s0.171:

id: 171

link: enP53p0s0

mtu: 9000

addresses:

- 192.168.171.53/24

version: 2

  2)run net plan apply:
  root@ilabg13:~# netplan --debug apply

  ** (generate:59965): DEBUG: 14:55:15.046: Processing input file
  /etc/netplan/00-installer-config.yaml..

  ** (generate:59965): DEBUG: 14:55:15.046: starting new processing pass

  ** (generate:59965): DEBUG: 14:55:15.046: Processing input file
  /etc/netplan/01-iscsi-config.yaml..

  ** (generate:59965): DEBUG: 14:55:15.046: starting new processing pass

  ** (generate:59965): DEBUG: 14:55:15.046: We have some netdefs, pass
  them through a final round of validation

  ** (generate:59965): DEBUG: 14:55:15.046: encdc0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdb0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: ence0f: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdb0.160: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP50s3832: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP53p0s0.171: setting
  default backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP50s3832.170: setting
  default backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP53p0s0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdc0.150: setting default
  backend to 1

  ** (generate:59965): DE

[Kernel-packages] [Bug 1930422] Re: thermald_1.9.1-1ubuntu0.4_amd64 breaks system

2021-06-07 Thread Srinivas Pandruvada

Thanks for the comment.
I would like to know something more about this system?
- Is this a desktop?
- Do you see any entry where /sys/class/thermal/cooling_device*/type = fan?
If you see can you control fan speed via 
/sys/class/thermal/cooling_device*/cur_state

I will cleanup the change and upload one final version before I merge
and release.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to thermald in Ubuntu.
https://bugs.launchpad.net/bugs/1930422

Title:
  thermald_1.9.1-1ubuntu0.4_amd64 breaks system

Status in thermald package in Ubuntu:
  New

Bug description:
  cpu runs at 100c fan at 3000rpm when in heavy use previous version was ok
  re: https://bugs.launchpad.net/ubuntu/+source/thermald/+bug/1913186
  lshw -short is:
  H/W path   Device   Class  Description
  ==
  system XPS 8940 (09C5)
  /0  bus0KV3RP
  /0/0memory 64KiB BIOS
  /0/9memory 16GiB System Memory
  /0/9/0  memory 8GiB DIMM DDR4 Synchronous 
32
  /0/9/1  memory 8GiB DIMM DDR4 Synchronous 
32
  /0/9/2  memory Project-Id-Version: 
lshwRepor
  /0/9/3  memory Project-Id-Version: 
lshwRepor
  /0/35   memory 512KiB L1 cache
  /0/36   memory 2MiB L2 cache
  /0/37   memory 16MiB L3 cache
  /0/38   processor  Intel(R) Core(TM) i7-10700 
CP
  /0/100  bridge Intel Corporation
  /0/100/1bridge Xeon E3-1200 v5/E3-1500 
v5/6t
  /0/100/1/0  displayTU106 [GeForce RTX 2060 
Rev. 
  /0/100/1/0.1multimedia TU106 High Definition 
Audio C
  /0/100/1/0.2busTU106 USB 3.1 Host 
Controller
  /0/100/1/0.2/0 usb3 busxHCI Host Controller
  /0/100/1/0.2/1 usb4 busxHCI Host Controller
  /0/100/1/0.3busTU106 USB Type-C UCSI 
Control
  /0/100/2displayIntel Corporation
  /0/100/4genericXeon E3-1200 v5/E3-1500 
v5/6t
  /0/100/8genericXeon E3-1200 v5/v6 / 
E3-1500 
  /0/100/12   genericComet Lake PCH Thermal 
Contro
  /0/100/14   busComet Lake USB 3.1 xHCI 
Host 
  /0/100/14/0usb1 busxHCI Host Controller
  /0/100/14/0/4  enx0c5b8f279a64  communication  HUAWEI_MOBILE
  /0/100/14/0/5   input  Dell MS116 USB Optical 
Mouse
  /0/100/14/0/6   input  Dell KB216 Wired Keyboard
  /0/100/14/0/b   genericUSB2.0-CRW
  /0/100/14/0/c   genericUB91C
  /0/100/14/0/e   communication  Bluetooth wireless 
interface
  /0/100/14/1usb2 busxHCI Host Controller
  /0/100/14.2 memory RAM memory
  /0/100/14.3wlo1 networkWi-Fi 6 AX201
  /0/100/15   busComet Lake PCH Serial IO 
I2C 
  /0/100/16   communication  Comet Lake HECI Controller
  /0/100/17   storageIntel Corporation
  /0/100/1b   bridge Comet Lake PCI Express 
Root P
  /0/100/1b/0 storageSamsung Electronics Co Ltd
  /0/100/1b/0/0  /dev/nvme0   storagePM991 NVMe Samsung 512GB
  /0/100/1b/0/0/1/dev/nvme0n1 disk   512GB NVMe namespace
  /0/100/1b/0/0/1/1   volume 149MiB Windows FAT volume
  /0/100/1b/0/0/1/2  /dev/nvme0n1p2   volume 127MiB reserved partition
  /0/100/1b/0/0/1/3  /dev/nvme0n1p3   volume 214GiB Windows NTFS volume
  /0/100/1b/0/0/1/4  /dev/nvme0n1p4   volume 989MiB Windows NTFS volume
  /0/100/1b/0/0/1/5  /dev/nvme0n1p5   volume 16GiB Windows NTFS volume
  /0/100/1b/0/0/1/6  /dev/nvme0n1p6   volume 1417MiB Windows NTFS volume
  /0/100/1b/0/0/1/7  /dev/nvme0n1p7   volume 243GiB EXT4 volume
  /0/100/1c   bridge Intel Corporation
  /0/100/1c/0enp3s0   networkRealtek Semiconductor Co., 
Lt
  /0/100/1f   bridge Intel Corporation
  /0/100/1f.3 multimedia Comet Lake PCH cAVS
  /0/100/1f.4

[Kernel-packages] [Bug 1929657] joutnalctl

--- Comment (attachment only) From mario.alberto.gali...@ibm.com 2021-06-07 
16:08 EDT---


** Attachment added: "joutnalctl"
   
https://bugs.launchpad.net/bugs/1929657/+attachment/5502963/+files/dump-of-journalctl.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1929657

Title:
  [Ubuntu 20.4.2]  vLan not getting static IP assigned (on s390x)

Status in Ubuntu on IBM z Systems:
  Incomplete
Status in linux package in Ubuntu:
  New
Status in netplan.io package in Ubuntu:
  New

Bug description:
  ---Problem Description---
  Doing vLAN configuration one of the vLANs is not getting static IP assigned 
when the rest are workin without problems
   
  Contact Information = Mario Alvarado/mario.alberto.gali...@ibm.com 
   
  ---uname output---
  Linux ilabg13.tuc.stglabs.ibm.com 5.4.0-73-generic #82-Ubuntu SMP Wed Apr 14 
17:29:32 UTC 2021 s390x s390x s390x GNU/Linux
   
  Machine Type = z15 
   
  ---Debugger---
  A debugger is not configured
   
  ---Steps to Reproduce---
   1)Configure the netplan file as follow:
  root@ilabg13:~# cat /etc/netplan/01-iscsi-config.yaml

  # This is the network config written by 'subiquity'

  network:

ethernets:

  encdb0:

addresses:

- 11.111.114.213/22

macaddress: 02:76:54:00:00:03

  encdc0:

addresses:

- 11.111.112.213/22

macaddress: 02:76:54:00:00:04

  enP50s3832 :

addresses:

- 11.111.112.214/22

  enP53p0s0:

addresses:

- 11.111.112.215/22

vlans:

  encdb0.160:

id: 160

link: encdb0

mtu: 9000

addresses:

- 192.168.160.53/24

  encdc0.150:

id: 150

link: encdc0

mtu: 9000

addresses:

- 192.168.150.53/24

  enP50s3832.170:

id: 170

link: enP50s3832

mtu: 9000

addresses:

- 192.168.170.53/24

  enP53p0s0.171:

id: 171

link: enP53p0s0

mtu: 9000

addresses:

- 192.168.171.53/24

version: 2

  2)run net plan apply:
  root@ilabg13:~# netplan --debug apply

  ** (generate:59965): DEBUG: 14:55:15.046: Processing input file
  /etc/netplan/00-installer-config.yaml..

  ** (generate:59965): DEBUG: 14:55:15.046: starting new processing pass

  ** (generate:59965): DEBUG: 14:55:15.046: Processing input file
  /etc/netplan/01-iscsi-config.yaml..

  ** (generate:59965): DEBUG: 14:55:15.046: starting new processing pass

  ** (generate:59965): DEBUG: 14:55:15.046: We have some netdefs, pass
  them through a final round of validation

  ** (generate:59965): DEBUG: 14:55:15.046: encdc0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdb0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: ence0f: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdb0.160: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP50s3832: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP53p0s0.171: setting
  default backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP50s3832.170: setting
  default backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP53p0s0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdc0.150: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.047: Generating output files..

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  ence0f is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  ence0f is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  encdb0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  encdb0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  encdc0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  encdc0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  enP50s3832 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition

[Kernel-packages] [Bug 1929657] Comment bridged from LTC Bugzilla

--- Comment From mario.alberto.gali...@ibm.com 2021-06-07 16:13 EDT---
Just executed netplan try and netplan apply and take snapshot of journalctl.
It is attached now!

- The configuration has not being touched for long time
- Correct is the only one presenting this problem
- Correct all of the host has RoCe v2.X installed

Could you explain what do you mean with setup the vLan using the IP
commands?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1929657

Title:
  [Ubuntu 20.4.2]  vLan not getting static IP assigned (on s390x)

Status in Ubuntu on IBM z Systems:
  Incomplete
Status in linux package in Ubuntu:
  New
Status in netplan.io package in Ubuntu:
  New

Bug description:
  ---Problem Description---
  Doing vLAN configuration one of the vLANs is not getting static IP assigned 
when the rest are workin without problems
   
  Contact Information = Mario Alvarado/mario.alberto.gali...@ibm.com 
   
  ---uname output---
  Linux ilabg13.tuc.stglabs.ibm.com 5.4.0-73-generic #82-Ubuntu SMP Wed Apr 14 
17:29:32 UTC 2021 s390x s390x s390x GNU/Linux
   
  Machine Type = z15 
   
  ---Debugger---
  A debugger is not configured
   
  ---Steps to Reproduce---
   1)Configure the netplan file as follow:
  root@ilabg13:~# cat /etc/netplan/01-iscsi-config.yaml

  # This is the network config written by 'subiquity'

  network:

ethernets:

  encdb0:

addresses:

- 11.111.114.213/22

macaddress: 02:76:54:00:00:03

  encdc0:

addresses:

- 11.111.112.213/22

macaddress: 02:76:54:00:00:04

  enP50s3832 :

addresses:

- 11.111.112.214/22

  enP53p0s0:

addresses:

- 11.111.112.215/22

vlans:

  encdb0.160:

id: 160

link: encdb0

mtu: 9000

addresses:

- 192.168.160.53/24

  encdc0.150:

id: 150

link: encdc0

mtu: 9000

addresses:

- 192.168.150.53/24

  enP50s3832.170:

id: 170

link: enP50s3832

mtu: 9000

addresses:

- 192.168.170.53/24

  enP53p0s0.171:

id: 171

link: enP53p0s0

mtu: 9000

addresses:

- 192.168.171.53/24

version: 2

  2)run net plan apply:
  root@ilabg13:~# netplan --debug apply

  ** (generate:59965): DEBUG: 14:55:15.046: Processing input file
  /etc/netplan/00-installer-config.yaml..

  ** (generate:59965): DEBUG: 14:55:15.046: starting new processing pass

  ** (generate:59965): DEBUG: 14:55:15.046: Processing input file
  /etc/netplan/01-iscsi-config.yaml..

  ** (generate:59965): DEBUG: 14:55:15.046: starting new processing pass

  ** (generate:59965): DEBUG: 14:55:15.046: We have some netdefs, pass
  them through a final round of validation

  ** (generate:59965): DEBUG: 14:55:15.046: encdc0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdb0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: ence0f: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdb0.160: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP50s3832: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP53p0s0.171: setting
  default backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP50s3832.170: setting
  default backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: enP53p0s0: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.046: encdc0.150: setting default
  backend to 1

  ** (generate:59965): DEBUG: 14:55:15.046: Configuration is valid

  ** (generate:59965): DEBUG: 14:55:15.047: Generating output files..

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  ence0f is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  ence0f is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  encdb0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  encdb0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: openvswitch: definition
  encdc0 is not for us (backend 1)

  ** (generate:59965): DEBUG: 14:55:15.047: NetworkManager: definition
  encdc0 is not for us (backend

[Kernel-packages] [Bug 1931166] [NEW] Focal update: v5.4.124 upstream stable release

Public bug reported:


SRU Justification

Impact:
   The upstream process for stable tree updates is quite similar
   in scope to the Ubuntu SRU process, e.g., each patch has to
   demonstrably fix a bug, and each patch is vetted by upstream
   by originating either directly from a mainline/stable Linux tree or
   a minimally backported form of that patch. The following upstream
   stable patches should be included in the Ubuntu kernel:

   v5.4.124 upstream stable release
   from git://git.kernel.org/

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: Invalid

** Affects: linux (Ubuntu Focal)
 Importance: Medium
 Assignee: Kamal Mostafa (kamalmostafa)
 Status: In Progress


** Tags: kernel-stable-tracking-bug

** Changed in: linux (Ubuntu)
   Status: New => Confirmed

** Tags added: kernel-stable-tracking-bug

** Also affects: linux (Ubuntu Focal)
   Importance: Undecided
   Status: New

** Changed in: linux (Ubuntu Focal)
   Status: New => In Progress

** Changed in: linux (Ubuntu Focal)
   Importance: Undecided => Medium

** Changed in: linux (Ubuntu Focal)
 Assignee: (unassigned) => Kamal Mostafa (kamalmostafa)

** Changed in: linux (Ubuntu)
   Status: Confirmed => Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1931166

Title:
  Focal update: v5.4.124 upstream stable release

Status in linux package in Ubuntu:
  Invalid
Status in linux source package in Focal:
  In Progress

Bug description:
  
  SRU Justification

  Impact:
 The upstream process for stable tree updates is quite similar
 in scope to the Ubuntu SRU process, e.g., each patch has to
 demonstrably fix a bug, and each patch is vetted by upstream
 by originating either directly from a mainline/stable Linux tree or
 a minimally backported form of that patch. The following upstream
 stable patches should be included in the Ubuntu kernel:

 v5.4.124 upstream stable release
 from git://git.kernel.org/

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931166/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1931166] Re: Focal update: v5.4.124 upstream stable release

** Description changed:

+ SRU Justification
  
- SRU Justification
+ Impact:
+    The upstream process for stable tree updates is quite similar
+    in scope to the Ubuntu SRU process, e.g., each patch has to
+    demonstrably fix a bug, and each patch is vetted by upstream
+    by originating either directly from a mainline/stable Linux tree or
+    a minimally backported form of that patch. The following upstream
+    stable patches should be included in the Ubuntu kernel:
  
- Impact:
-The upstream process for stable tree updates is quite similar
-in scope to the Ubuntu SRU process, e.g., each patch has to
-demonstrably fix a bug, and each patch is vetted by upstream
-by originating either directly from a mainline/stable Linux tree or
-a minimally backported form of that patch. The following upstream
-stable patches should be included in the Ubuntu kernel:
+    v5.4.124 upstream stable release
+    from git://git.kernel.org/
  
-v5.4.124 upstream stable release
-from git://git.kernel.org/
+ ALSA: hda/realtek: Headphone volume is controlled by Front mixer
+ ALSA: usb-audio: scarlett2: Fix device hang with ehci-pci
+ ALSA: usb-audio: scarlett2: Improve driver startup messages
+ cifs: set server->cipher_type to AES-128-CCM for SMB3.0
+ NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
+ iommu/vt-d: Fix sysfs leak in alloc_iommu()
+ perf intel-pt: Fix sample instruction bytes
+ perf intel-pt: Fix transaction abort handling
+ perf scripts python: exported-sql-viewer.py: Fix copy to clipboard from Top 
Calls by elapsed Time report
+ perf scripts python: exported-sql-viewer.py: Fix Array TypeError
+ perf scripts python: exported-sql-viewer.py: Fix warning display
+ proc: Check /proc/$pid/attr/ writes against file opener
+ net: hso: fix control-request directions
+ ath10k: Validate first subframe of A-MSDU before processing the list
+ dm snapshot: properly fix a crash when an origin has no snapshots
+ drm/amdgpu/vcn1: add cancel_delayed_work_sync before power gate
+ drm/amdgpu/vcn2.0: add cancel_delayed_work_sync before power gate
+ drm/amdgpu/vcn2.5: add cancel_delayed_work_sync before power gate
+ selftests/gpio: Use TEST_GEN_PROGS_EXTENDED
+ selftests/gpio: Move include of lib.mk up
+ selftests/gpio: Fix build when source tree is read only
+ kgdb: fix gcc-11 warnings harder
+ Documentation: seccomp: Fix user notification documentation
+ serial: core: fix suspicious security_locked_down() call
+ misc/uss720: fix memory leak in uss720_probe
+ thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue
+ mei: request autosuspend after sending rx flow control
+ staging: iio: cdc: ad7746: avoid overwrite of num_channels
+ iio: gyro: fxas21002c: balance runtime power in error path
+ iio: adc: ad7768-1: Fix too small buffer passed to 
iio_push_to_buffers_with_timestamp()
+ iio: adc: ad7124: Fix missbalanced regulator enable / disable on error.
+ iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers
+ iio: adc: ad7793: Add missing error code in ad7793_setup()
+ serial: 8250_pci: Add support for new HPE serial device
+ serial: 8250_pci: handle FL_NOIRQ board flag
+ USB: trancevibrator: fix control-request direction
+ USB: usbfs: Don't WARN about excessively large memory allocations
+ serial: tegra: Fix a mask operation that is always true
+ serial: sh-sci: Fix off-by-one error in FIFO threshold register setting
+ serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
+ USB: serial: ti_usb_3410_5052: add startech.com device id
+ USB: serial: option: add Telit LE910-S1 compositions 0x7010, 0x7011
+ USB: serial: ftdi_sio: add IDs for IDS GmbH Products
+ USB: serial: pl2303: add device id for ADLINK ND-6530 GC
+ thermal/drivers/intel: Initialize RW trip to THERMAL_TEMP_INVALID
+ usb: dwc3: gadget: Properly track pending and queued SG
+ usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen()
+ net: usb: fix memory leak in smsc75xx_bind
+ spi: spi-geni-qcom: Fix use-after-free on unbind
+ Bluetooth: cmtp: fix file refcount when cmtp_attach_device fails
+ fs/nfs: Use fatal_signal_pending instead of signal_pending
+ NFS: fix an incorrect limit in filelayout_decode_layout()
+ NFS: Fix an Oopsable condition in __nfs_pageio_add_request()
+ NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
+ NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
+ drm/meson: fix shutdown crash when component not probed
+ net/mlx5e: Fix multipath lag activation
+ net/mlx5e: Fix nullptr in add_vlan_push_action()
+ net/mlx4: Fix EEPROM dump support
+ Revert "net:tipc: Fix a double free in tipc_sk_mcast_rcv"
+ tipc: wait and exit until all work queues are done
+ tipc: skb_linearize the head skb when reassembling msgs
+ spi: spi-fsl-dspi: Fix a resource leak in an error handling path
+ net: dsa: mt7530: fix VLAN traffic l

Re: [Kernel-packages] [Bug 1930422] Re: thermald_1.9.1-1ubuntu0.4_amd64 breaks system

2021-06-07 Thread Daniel James Brinton

yes desktop/tower pc with ubuntu 20.04 lts desktop

cooling_device0-4 (out of 21) type = fan

all five cur_state were set at 0 changed them to various values between 
0-1 made no difference to fans

On 07/06/2021 20:36, Srinivas Pandruvada wrote:
> Thanks for the comment.
> I would like to know something more about this system?
> - Is this a desktop?
> - Do you see any entry where /sys/class/thermal/cooling_device*/type = fan?
> If you see can you control fan speed via 
> /sys/class/thermal/cooling_device*/cur_state
>
> I will cleanup the change and upload one final version before I merge
> and release.
>

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to thermald in Ubuntu.
https://bugs.launchpad.net/bugs/1930422

Title:
  thermald_1.9.1-1ubuntu0.4_amd64 breaks system

Status in thermald package in Ubuntu:
  New

Bug description:
  cpu runs at 100c fan at 3000rpm when in heavy use previous version was ok
  re: https://bugs.launchpad.net/ubuntu/+source/thermald/+bug/1913186
  lshw -short is:
  H/W path   Device   Class  Description
  ==
  system XPS 8940 (09C5)
  /0  bus0KV3RP
  /0/0memory 64KiB BIOS
  /0/9memory 16GiB System Memory
  /0/9/0  memory 8GiB DIMM DDR4 Synchronous 
32
  /0/9/1  memory 8GiB DIMM DDR4 Synchronous 
32
  /0/9/2  memory Project-Id-Version: 
lshwRepor
  /0/9/3  memory Project-Id-Version: 
lshwRepor
  /0/35   memory 512KiB L1 cache
  /0/36   memory 2MiB L2 cache
  /0/37   memory 16MiB L3 cache
  /0/38   processor  Intel(R) Core(TM) i7-10700 
CP
  /0/100  bridge Intel Corporation
  /0/100/1bridge Xeon E3-1200 v5/E3-1500 
v5/6t
  /0/100/1/0  displayTU106 [GeForce RTX 2060 
Rev. 
  /0/100/1/0.1multimedia TU106 High Definition 
Audio C
  /0/100/1/0.2busTU106 USB 3.1 Host 
Controller
  /0/100/1/0.2/0 usb3 busxHCI Host Controller
  /0/100/1/0.2/1 usb4 busxHCI Host Controller
  /0/100/1/0.3busTU106 USB Type-C UCSI 
Control
  /0/100/2displayIntel Corporation
  /0/100/4genericXeon E3-1200 v5/E3-1500 
v5/6t
  /0/100/8genericXeon E3-1200 v5/v6 / 
E3-1500 
  /0/100/12   genericComet Lake PCH Thermal 
Contro
  /0/100/14   busComet Lake USB 3.1 xHCI 
Host 
  /0/100/14/0usb1 busxHCI Host Controller
  /0/100/14/0/4  enx0c5b8f279a64  communication  HUAWEI_MOBILE
  /0/100/14/0/5   input  Dell MS116 USB Optical 
Mouse
  /0/100/14/0/6   input  Dell KB216 Wired Keyboard
  /0/100/14/0/b   genericUSB2.0-CRW
  /0/100/14/0/c   genericUB91C
  /0/100/14/0/e   communication  Bluetooth wireless 
interface
  /0/100/14/1usb2 busxHCI Host Controller
  /0/100/14.2 memory RAM memory
  /0/100/14.3wlo1 networkWi-Fi 6 AX201
  /0/100/15   busComet Lake PCH Serial IO 
I2C 
  /0/100/16   communication  Comet Lake HECI Controller
  /0/100/17   storageIntel Corporation
  /0/100/1b   bridge Comet Lake PCI Express 
Root P
  /0/100/1b/0 storageSamsung Electronics Co Ltd
  /0/100/1b/0/0  /dev/nvme0   storagePM991 NVMe Samsung 512GB
  /0/100/1b/0/0/1/dev/nvme0n1 disk   512GB NVMe namespace
  /0/100/1b/0/0/1/1   volume 149MiB Windows FAT volume
  /0/100/1b/0/0/1/2  /dev/nvme0n1p2   volume 127MiB reserved partition
  /0/100/1b/0/0/1/3  /dev/nvme0n1p3   volume 214GiB Windows NTFS volume
  /0/100/1b/0/0/1/4  /dev/nvme0n1p4   volume 989MiB Windows NTFS volume
  /0/100/1b/0/0/1/5  /dev/nvme0n1p5   volume 16GiB Windows NTFS volume
  /0/100/1b/0/0/1/6  /dev/nvme0n1p6   volume 1417MiB Windows NTFS volume
  /0/100/1b/0/0/1/7  /dev/nvme0n1p7   volume 243GiB EXT4 volume
  /0/100/1c   bridge

[Kernel-packages] [Bug 1928950] Re: ThinkPad X250 boot failure with kernel 5.4.0-73-generic (Linux Mint 19.3)

2021-06-07 Thread Sandra-Asja

Still boot failure with kernel 5.4.0.75-generic.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1928950

Title:
  ThinkPad X250 boot failure with kernel 5.4.0-73-generic (Linux Mint
  19.3)

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Bug/Regression introduced between 5.4.0-73 and 5.4.0-72 (-72 and all previous 
kernels installed by Mint 19.3 had no problems).
  Happens whether docked or undocked.
  Might relate to Bug #1928530.
  System tells to do a journalctl -xb, but I couldn't spot if there's something 
relevant.
  I'll collect the logs twice to help find the difference (one from -73 panic 
shell and one from -72 normally booted).

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1928950/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1930422] Re: thermald_1.9.1-1ubuntu0.4_amd64 breaks system

2021-06-07 Thread Srinivas Pandruvada

I wish fan control worked.
I release v2.4.6 with the changes. This is in master branch with tag v2.4.6.
There are three commits on top of v2.4.5 to address this issue.

Please try.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to thermald in Ubuntu.
https://bugs.launchpad.net/bugs/1930422

Title:
  thermald_1.9.1-1ubuntu0.4_amd64 breaks system

Status in thermald package in Ubuntu:
  New

Bug description:
  cpu runs at 100c fan at 3000rpm when in heavy use previous version was ok
  re: https://bugs.launchpad.net/ubuntu/+source/thermald/+bug/1913186
  lshw -short is:
  H/W path   Device   Class  Description
  ==
  system XPS 8940 (09C5)
  /0  bus0KV3RP
  /0/0memory 64KiB BIOS
  /0/9memory 16GiB System Memory
  /0/9/0  memory 8GiB DIMM DDR4 Synchronous 
32
  /0/9/1  memory 8GiB DIMM DDR4 Synchronous 
32
  /0/9/2  memory Project-Id-Version: 
lshwRepor
  /0/9/3  memory Project-Id-Version: 
lshwRepor
  /0/35   memory 512KiB L1 cache
  /0/36   memory 2MiB L2 cache
  /0/37   memory 16MiB L3 cache
  /0/38   processor  Intel(R) Core(TM) i7-10700 
CP
  /0/100  bridge Intel Corporation
  /0/100/1bridge Xeon E3-1200 v5/E3-1500 
v5/6t
  /0/100/1/0  displayTU106 [GeForce RTX 2060 
Rev. 
  /0/100/1/0.1multimedia TU106 High Definition 
Audio C
  /0/100/1/0.2busTU106 USB 3.1 Host 
Controller
  /0/100/1/0.2/0 usb3 busxHCI Host Controller
  /0/100/1/0.2/1 usb4 busxHCI Host Controller
  /0/100/1/0.3busTU106 USB Type-C UCSI 
Control
  /0/100/2displayIntel Corporation
  /0/100/4genericXeon E3-1200 v5/E3-1500 
v5/6t
  /0/100/8genericXeon E3-1200 v5/v6 / 
E3-1500 
  /0/100/12   genericComet Lake PCH Thermal 
Contro
  /0/100/14   busComet Lake USB 3.1 xHCI 
Host 
  /0/100/14/0usb1 busxHCI Host Controller
  /0/100/14/0/4  enx0c5b8f279a64  communication  HUAWEI_MOBILE
  /0/100/14/0/5   input  Dell MS116 USB Optical 
Mouse
  /0/100/14/0/6   input  Dell KB216 Wired Keyboard
  /0/100/14/0/b   genericUSB2.0-CRW
  /0/100/14/0/c   genericUB91C
  /0/100/14/0/e   communication  Bluetooth wireless 
interface
  /0/100/14/1usb2 busxHCI Host Controller
  /0/100/14.2 memory RAM memory
  /0/100/14.3wlo1 networkWi-Fi 6 AX201
  /0/100/15   busComet Lake PCH Serial IO 
I2C 
  /0/100/16   communication  Comet Lake HECI Controller
  /0/100/17   storageIntel Corporation
  /0/100/1b   bridge Comet Lake PCI Express 
Root P
  /0/100/1b/0 storageSamsung Electronics Co Ltd
  /0/100/1b/0/0  /dev/nvme0   storagePM991 NVMe Samsung 512GB
  /0/100/1b/0/0/1/dev/nvme0n1 disk   512GB NVMe namespace
  /0/100/1b/0/0/1/1   volume 149MiB Windows FAT volume
  /0/100/1b/0/0/1/2  /dev/nvme0n1p2   volume 127MiB reserved partition
  /0/100/1b/0/0/1/3  /dev/nvme0n1p3   volume 214GiB Windows NTFS volume
  /0/100/1b/0/0/1/4  /dev/nvme0n1p4   volume 989MiB Windows NTFS volume
  /0/100/1b/0/0/1/5  /dev/nvme0n1p5   volume 16GiB Windows NTFS volume
  /0/100/1b/0/0/1/6  /dev/nvme0n1p6   volume 1417MiB Windows NTFS volume
  /0/100/1b/0/0/1/7  /dev/nvme0n1p7   volume 243GiB EXT4 volume
  /0/100/1c   bridge Intel Corporation
  /0/100/1c/0enp3s0   networkRealtek Semiconductor Co., 
Lt
  /0/100/1f   bridge Intel Corporation
  /0/100/1f.3 multimedia Comet Lake PCH cAVS
  /0/100/1f.4 busComet Lake PCH SMBus 
Controll
  /0/100/1f.5 busComet Lake PCH SPI 
Controller
  /0/1

[Kernel-packages] [Bug 1883840] Re: Double free in DCCP module causing kernel panic

2021-06-07 Thread Seth Arnold

Hello Hadar, I'm sorry for the trouble.

These have been fixed:

  https://ubuntu.com/security/notices/USN-4577-1
  https://ubuntu.com/security/notices/USN-4576-1
  https://ubuntu.com/security/notices/USN-4578-1
  https://ubuntu.com/security/notices/USN-4579-1
  https://ubuntu.com/security/notices/USN-4580-1

This page is regenerated by a cronjob, it should be fixed eventually:

  https://ubuntu.com/security/CVE-2020-16119

Thanks

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1883840

Title:
  Double free in DCCP module causing kernel panic

Status in linux package in Ubuntu:
  Fix Released

Bug description:
  
  The problem is when the sock object gets cloned via 
dccp_create_openreq_child(),
  it gives all its attributes to the child sock object, and no reference counter
  is taken for the object dccps_hc_tx_ccid.
  If one of the sock objects (the parent or the cahild) is closes or 
disconnected,
  it frees the target objects dccps_hc_tx_ccid and provides us a dagling 
pointer in the other sock object.
  This causes an exploitable double free for an object contains function 
pointers.

  We can free dccps_hc_tx_ccid by calling connect(AF_UNSPEC),then spray the 
heap with other allocations,
  then call close() we'll potentially have a RIP control.

  This chunk of code is the responsible of freeing dccps_hc_tx_ccid, if called 
again it will call
  ccid_hc_tx_exit() from a freed object

  void ccid_hc_tx_delete(struct ccid *ccid, struct sock *sk)
  {
   if (ccid != NULL) {
    if (ccid->ccid_ops->ccid_hc_tx_exit != NULL)
     ccid->ccid_ops->ccid_hc_tx_exit(sk);   // <-- Calling a function 
pointer
    kmem_cache_free(ccid->ccid_ops->ccid_hc_tx_slab, ccid);
   }
  }

  disassembly :

  (gdb) disas ccid_hc_tx_delete
  Dump of assembler code for function ccid_hc_tx_delete:
     0x81a7a3a0 <+0>: test   rdi,rdi
     0x81a7a3a3 <+3>: je 0x81a7a3cd 

     0x81a7a3a5 <+5>: push   rbx
     0x81a7a3a6 <+6>: movrbx,rdi
     0x81a7a3a9 <+9>: movrdi,rsi
     0x81a7a3ac <+12>:movrax,QWORD PTR [rbx]

     0x81a7a3af <+15>:movrdx,QWORD PTR [rax+0x80]<—
  rax points to a freed object

     0x81a7a3b6 <+22>:test   rdx,rdx
     0x81a7a3b9 <+25>:je 0x81a7a3c0 


     0x81a7a3bb <+27>:call   rdx // <-- arbitrary call

     0x81a7a3bd <+29>:movrax,QWORD PTR [rbx]
     0x81a7a3c0 <+32>:movrsi,rbx
     0x81a7a3c3 <+35>:movrdi,QWORD PTR [rax+0x18]
     0x81a7a3c7 <+39>:poprbx
     0x81a7a3c8 <+40>:jmp0x811fb980 
     0x81a7a3cd <+45>:repz ret
  End of assembler dump.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1883840/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1836858] Re: Display flickers (monitor loses signal briefly) during "flickerfree" boot, while showing the BIOS logo on a black background

2021-06-07 Thread Daniel van Vugt

Yeah the problem seems to be getting worse in recent Ubuntu releases and
is more obvious on more laptops. That's good for testing at least.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1836858

Title:
  Display flickers (monitor loses signal briefly) during "flickerfree"
  boot, while showing the BIOS logo on a black background

Status in Plymouth:
  Unknown
Status in linux package in Ubuntu:
  Confirmed
Status in plymouth package in Ubuntu:
  Confirmed

Bug description:
  I am trying flickerfree boot in 19.10 [1], but find it actually
  flickers part way through:

1. BIOS logo on a black background.
2. Display mode resets, no image on a black background briefly.
3. BIOS logo on a black background.

  The flicker occurs seemingly during kernel startup since my
  peripherals are lit up before the problem occurs.

  Suspecting this might be related to FB handover:

    [2.751028] fb0: switching to inteldrmfb from EFI VGA

  I tried disabling that with a big hammer:

    i915.modeset=0

  so it stays in efifb, and that works -- no more flickering, providing
  I don't let i915 take over the framebuffer.

  [1] https://discourse.ubuntu.com/t/testing-flickerfree-boot/11854

  ProblemType: Bug
  DistroRelease: Ubuntu 19.10
  Package: linux-image-5.2.0-8-generic 5.2.0-8.9
  ProcVersionSignature: Ubuntu 5.2.0-8.9-generic 5.2.0
  Uname: Linux 5.2.0-8-generic x86_64
  ApportVersion: 2.20.11-0ubuntu5
  Architecture: amd64
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', 
'/dev/snd/controlC0', '/dev/snd/hwC0D2', '/dev/snd/hwC0D0', 
'/dev/snd/pcmC0D9p', '/dev/snd/pcmC0D8p', '/dev/snd/pcmC0D7p', 
'/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D2c', '/dev/snd/pcmC0D0c', 
'/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
  Date: Wed Jul 17 16:34:36 2019
  InstallationDate: Installed on 2019-05-02 (76 days ago)
  InstallationMedia: Ubuntu 19.10 "Eoan EANIMAL" - Alpha amd64 (20190501)
  MachineType: LENOVO 10M7CTO1WW
  ProcFB: 0 i915drmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.2.0-8-generic 
root=UUID=9bfb5f01-bdd4-4854-bfce-1c28e2f2f3bc ro quiet splash i915.fastboot=1 
vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-5.2.0-8-generic N/A
   linux-backports-modules-5.2.0-8-generic  N/A
   linux-firmware   1.180
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/06/2018
  dmi.bios.vendor: LENOVO
  dmi.bios.version: M16KT47A
  dmi.board.name: 3102
  dmi.board.vendor: LENOVO
  dmi.board.version: SDK0J40709 WIN 3259627060530
  dmi.chassis.type: 3
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: None
  dmi.modalias: 
dmi:bvnLENOVO:bvrM16KT47A:bd02/06/2018:svnLENOVO:pn10M7CTO1WW:pvrThinkCentreM710s:rvnLENOVO:rn3102:rvrSDK0J40709WIN3259627060530:cvnLENOVO:ct3:cvrNone:
  dmi.product.family: ThinkCentre M710s
  dmi.product.name: 10M7CTO1WW
  dmi.product.sku: LENOVO_MT_10M7_BU_Think_FM_ThinkCentre M710s
  dmi.product.version: ThinkCentre M710s
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/plymouth/+bug/1836858/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1890772] Re: No signal on 4K 60Hz DisplayPort monitor by default, until "max bpc" is lowered to 8

2021-06-07 Thread Daniel van Vugt

This should also fix the problem for some people in Wayland sessions:

  https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1834

It is in mutter release 40.1 and future release 3.38.5.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1890772

Title:
  No signal on 4K 60Hz DisplayPort monitor by default, until "max bpc"
  is lowered to 8

Status in gnome-control-center:
  Unknown
Status in HWE Next:
  New
Status in Linux:
  Unknown
Status in Mutter:
  Unknown
Status in OEM Priority Project:
  New
Status in X.Org X server:
  Unknown
Status in linux package in Ubuntu:
  Confirmed
Status in mutter package in Ubuntu:
  Won't Fix
Status in xorg-server package in Ubuntu:
  Invalid

Bug description:
  The bug is originated from,
  https://bugs.launchpad.net/somerville/+bug/1887915/
  https://bugs.launchpad.net/somerville/+bug/1886778

  It has some problem when user connect to external 4K monitor with refresh 
rate 60.
  The problem can be solved by lower the bpc, or lower the refresh rate.

  `xrandr --output DP-3 --set "max bpc" 8`

  Would like to open this bug to open discussion for enhancing user
  experience.

  existed upstream bug:
   - https://gitlab.freedesktop.org/drm/intel/-/issues/1890

  ---
  ProblemType: Bug
  ApportVersion: 2.20.11-0ubuntu27.4
  Architecture: amd64
  BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log'
  CasperMD5CheckResult: skip
  CompositorRunning: None
  CurrentDesktop: ubuntu:GNOME
  DistUpgraded: Fresh install
  DistributionChannelDescriptor:
   # This is the distribution channel descriptor for the OEM CDs
   # For more information see 
http://wiki.ubuntu.com/DistributionChannelDescriptor
   canonical-oem-somerville-focal-amd64-20200502-85+fossa-samwell-tgl+X42
  DistroCodename: focal
  DistroRelease: Ubuntu 20.04
  DistroVariant: ubuntu
  DkmsStatus: nvidia, 440.100, 5.6.0-1021-oem, x86_64: installed
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation Device [8086:9a49] (rev 01) (prog-if 00 [VGA controller])
     Subsystem: Dell Device [1028:09fc]
     Subsystem: Dell GP107M [GeForce MX350] [1028:09fc]
  InstallationDate: Installed on 2020-08-07 (0 days ago)
  InstallationMedia: Ubuntu 20.04 "Focal" - Build amd64 LIVE Binary 
20200502-05:58
  Package: xorg 1:7.7+19ubuntu14 [origin: unknown]
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.6.0-1021-oem 
root=UUID=41be2253-410a-4ef7-a096-4193a58efdbd ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 5.6.0-1021.21-oem 5.6.19
  Tags: third-party-packages focal ubuntu
  Uname: Linux 5.6.0-1021-oem x86_64
  UnreportableReason: This is not an official Ubuntu package. Please remove any 
third party package and try again.
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  version.compiz: compiz N/A
  version.libdrm2: libdrm2 2.4.101-2
  version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.8-0ubuntu1~20.04.1
  version.libgl1-mesa-glx: libgl1-mesa-glx N/A
  version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20200226-1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-control-center/+bug/1890772/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1786013] Autopkgtest regression report (linux-meta-raspi-5.4/5.4.0.1037.39)

2021-06-07 Thread Ubuntu SRU Bot

All autopkgtests for the newly accepted linux-meta-raspi-5.4 (5.4.0.1037.39) 
for bionic have finished running.
The following regressions have been reported in tests triggered by the package:

fwts/unknown (arm64)
systemd/237-3ubuntu10.47 (arm64)
lxc/3.0.3-0ubuntu1~18.04.1 (arm64)
dpdk/unknown (arm64)
zfs-linux/0.7.5-1ubuntu16.11 (arm64)
adv-17v35x/unknown (arm64)
bbswitch/0.8-4ubuntu1 (arm64)
glibc/unknown (arm64)
xtables-addons/unknown (arm64)
linux-raspi-5.4/unknown (arm64)
acpi-call/1.1.0-4 (arm64)


Please visit the excuses page listed below and investigate the failures, 
proceeding afterwards as per the StableReleaseUpdates policy regarding 
autopkgtest regressions [1].

https://people.canonical.com/~ubuntu-archive/proposed-
migration/bionic/update_excuses.html#linux-meta-raspi-5.4

[1] https://wiki.ubuntu.com/StableReleaseUpdates#Autopkgtest_Regressions

Thank you!

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-azure in Ubuntu.
https://bugs.launchpad.net/bugs/1786013

Title:
  Packaging resync

Status in linux package in Ubuntu:
  Fix Released
Status in linux-azure package in Ubuntu:
  Fix Released
Status in linux-azure-edge package in Ubuntu:
  Confirmed
Status in linux source package in Precise:
  Fix Released
Status in linux-azure source package in Precise:
  Invalid
Status in linux-azure-edge source package in Precise:
  Invalid
Status in linux source package in Trusty:
  Fix Released
Status in linux-azure source package in Trusty:
  Fix Released
Status in linux-azure-edge source package in Trusty:
  Invalid
Status in linux source package in Xenial:
  Fix Released
Status in linux-azure source package in Xenial:
  Fix Released
Status in linux-azure-edge source package in Xenial:
  Fix Released
Status in linux source package in Bionic:
  Fix Released
Status in linux-azure source package in Bionic:
  Fix Released
Status in linux-azure-edge source package in Bionic:
  Fix Released
Status in linux source package in Cosmic:
  Fix Released
Status in linux-azure source package in Cosmic:
  Fix Released
Status in linux-azure-edge source package in Cosmic:
  Confirmed
Status in linux source package in Disco:
  Fix Released
Status in linux-azure source package in Disco:
  Fix Released
Status in linux-azure-edge source package in Disco:
  Won't Fix

Bug description:
  Ongoing packing resyncs.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1786013/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1905157] Re: package zfsutils-linux 0.8.3-1ubuntu12.4 failed to install/upgrade: installed zfsutils-linux package post-installation script subprocess returned error exit status