[Kernel-packages] [Bug 1450396] Re: Gigabyte P35-DS3: does not stay suspended with default "ug" wake-on-lan setting
** Attachment added: "/proc/acpi/wakeup" https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1450396/+attachment/4485485/+files/wakeup -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1450396 Title: Gigabyte P35-DS3: does not stay suspended with default "ug" wake-on- lan setting Status in linux package in Ubuntu: Incomplete Status in systemd package in Ubuntu: Triaged Bug description: === Update: This bug was reported from BIOS version F13 of my board, in the meantime I upgraded to the most recent version F14, but this had no impact on the bug. === Hello, using Suspend-to-RAM on my system has stopped working reliably on Vivid when booting with Systemd. When I try to suspend my PC the following happens: - PC turns off - PC unwantedly wakes up (turns on) by itself again. This time span until it turns on again can reach from a second (almost immediately) until two or three minutes. - In a few cases (<25%), the PC stays suspended properly. A way to workaround this problem is to boot my PC with Upstart instead of Systemd, then this problem never happens (and has never happened in any of the previous Ubuntu versions since 2008). Thus it seems to be a bug somehow related to Systemd. Other steps I have tried to solve the problem (without any success): - Checking BIOS settings, all options are set that way that the PC should never wake up by any event other than pressing the power button. - Checking by running "cat /proc/acpi/wakeup | grep enabled" if any device could cause wake up events. This lists my USB controller, but deactivating it (with commands like "echo USB0 > /proc/acpi/wakeup") had no success on the problem. Also suspend while running Upstart works fine despite the USB controller listed as "enabled". In the system logs I could see no hint what causes the undesired wake- ups. Allthough there is one factor which seems to have a certain influence: If I close programs like Pidgin, Skype or Firefox that cause continuous network traffic, the chance is higher that my PC will stay suspened (while runinng Systemd). Kind regards, Jan ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: systemd 219-7ubuntu3 ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Thu Apr 30 11:24:46 2015 InstallationDate: Installed on 2015-04-16 (13 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Beta amd64 (20150415) MachineType: Gigabyte Technology Co., Ltd. P35-DS3 ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.19.0-15-generic root=/dev/mapper/internal--ssd-root ro rootflags=subvol=@ quiet splash SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/10/2008 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: F13 dmi.board.name: P35-DS3 dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF13:bd07/10/2008:svnGigabyteTechnologyCo.,Ltd.:pnP35-DS3:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnP35-DS3:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: P35-DS3 dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1450396/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1389675] Re: Function keys will not adjust brightness
** Changed in: linux (Ubuntu) Assignee: (unassigned) => Chintana Prabhu (chintanarp98) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1389675 Title: Function keys will not adjust brightness Status in linux package in Ubuntu: Confirmed Bug description: I have just installed Ubuntu 14.04, and I cannot make the function keys adjust the brightness. I have been trying to get a solution to the problem in this forum http://ubuntuforums.org/showthread.php?t=2250862&page=2&p=13159626#post13159626 . ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-39-generic 3.13.0-39.66 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: paul 1336 F pulseaudio /dev/snd/pcmC0D0p: paul 1336 F...m pulseaudio CurrentDesktop: Unity Date: Wed Nov 5 13:31:30 2014 HibernationDevice: RESUME=UUID=6357ccbf-2f39-4ca6-9cc1-65eb05bf30f6 InstallationDate: Installed on 2014-10-29 (6 days ago) InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.2) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b404 Chicony Electronics Co., Ltd Bus 001 Device 006: ID 1c4f:0003 SiGma Micro HID controller Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: ASUSTeK COMPUTER INC. X551MA ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic.efi.signed root=UUID=730dc0d2-8142-4bc0-a5ee-a2928da9bd65 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-39-generic N/A linux-backports-modules-3.13.0-39-generic N/A linux-firmware 1.127.7 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/27/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X551MA.510 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X551MA dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX551MA.510:bd06/27/2014:svnASUSTeKCOMPUTERINC.:pnX551MA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX551MA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X551MA dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1389675/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1450396] Re: Gigabyte P35-DS3: does not stay suspended with default "ug" wake-on-lan setting
Christopher, yes, my workaround seems to work in both cases 1) and 2) ( =PC stays suspended properly and doesn't power itself on unwantedly). Btw. it seems that which graphics driver is in use is completely unrelated to this bug. Regarding 3): - It doesn't seem to matter if I suspend by pressing power button, session menu in Unity or executing 'systemctl suspend'. As noted before, the bug never appears when suspending with 'pm-suspend', because that implicitly does the same thing as my workaround (=explicitly setting wol flag to 'g' on my network card). - Is it really necessary to provide a resume trace? As far as I understand, this is for cases when resume fails/doesn't work properly, but this bug is _not_ about that resume fails, but that it works correctly, but is triggered automatically (and undesired) by wake-on- lan. Kind regards, Jan -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1450396 Title: Gigabyte P35-DS3: does not stay suspended with default "ug" wake-on- lan setting Status in linux package in Ubuntu: Incomplete Status in systemd package in Ubuntu: Triaged Bug description: === Update: This bug was reported from BIOS version F13 of my board, in the meantime I upgraded to the most recent version F14, but this had no impact on the bug. === Hello, using Suspend-to-RAM on my system has stopped working reliably on Vivid when booting with Systemd. When I try to suspend my PC the following happens: - PC turns off - PC unwantedly wakes up (turns on) by itself again. This time span until it turns on again can reach from a second (almost immediately) until two or three minutes. - In a few cases (<25%), the PC stays suspended properly. A way to workaround this problem is to boot my PC with Upstart instead of Systemd, then this problem never happens (and has never happened in any of the previous Ubuntu versions since 2008). Thus it seems to be a bug somehow related to Systemd. Other steps I have tried to solve the problem (without any success): - Checking BIOS settings, all options are set that way that the PC should never wake up by any event other than pressing the power button. - Checking by running "cat /proc/acpi/wakeup | grep enabled" if any device could cause wake up events. This lists my USB controller, but deactivating it (with commands like "echo USB0 > /proc/acpi/wakeup") had no success on the problem. Also suspend while running Upstart works fine despite the USB controller listed as "enabled". In the system logs I could see no hint what causes the undesired wake- ups. Allthough there is one factor which seems to have a certain influence: If I close programs like Pidgin, Skype or Firefox that cause continuous network traffic, the chance is higher that my PC will stay suspened (while runinng Systemd). Kind regards, Jan ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: systemd 219-7ubuntu3 ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Thu Apr 30 11:24:46 2015 InstallationDate: Installed on 2015-04-16 (13 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Beta amd64 (20150415) MachineType: Gigabyte Technology Co., Ltd. P35-DS3 ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.19.0-15-generic root=/dev/mapper/internal--ssd-root ro rootflags=subvol=@ quiet splash SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/10/2008 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: F13 dmi.board.name: P35-DS3 dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF13:bd07/10/2008:svnGigabyteTechnologyCo.,Ltd.:pnP35-DS3:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnP35-DS3:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: P35-DS3 dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1450396/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 607061] Re: screen brightness unchangable
** Changed in: linux (Ubuntu) Assignee: (unassigned) => Chintana Prabhu (chintanarp98) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/607061 Title: screen brightness unchangable Status in xf86-video-intel: Invalid Status in linux package in Ubuntu: Incomplete Bug description: Binary package hint: xorg Hello, I am using a Gateway NV5927U laptop and the screen brightness is unchangeable via the keyboard controls. The brightness is stuck at 100% and changing values inside of /proc/acpi/video/GFX0 have no effect on the brightness. Please let me know what else you may need. If the brightness is changed inside of Microsoft Windows it will visually stay dim until GDM starts, at this point the screen raises to full brightness and is locked at that state. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: xorg 1:7.5+5ubuntu1 ProcVersionSignature: Ubuntu 2.6.32-23.37-generic 2.6.32.15+drm33.5 Uname: Linux 2.6.32-23-generic i686 Architecture: i386 Date: Mon Jul 19 00:19:36 2010 InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Alpha i386 (20100213) Lsusb: Bus 002 Device 003: ID 04f2:b044 Chicony Electronics Co., Ltd Bus 002 Device 002: ID 8087:0020 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Gateway NV59 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-23-generic root=UUID=2e6f02f8-a269-473e-bdab-905fc6eb70a3 ro processor.max_cstate=2 vga=0x317 quiet splash ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash SourcePackage: xorg dmi.bios.date: 11/26/2009 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: V1.09 dmi.board.name: NV59 dmi.board.vendor: Gateway dmi.board.version: Rev dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Gateway dmi.chassis.version: Rev dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvrV1.09:bd11/26/2009:svnGateway:pnNV59:pvrRev:rvnGateway:rnNV59:rvrRev:cvnGateway:ct10:cvrRev: dmi.product.name: NV59 dmi.product.version: Rev dmi.sys.vendor: Gateway glxinfo: Error: [Errno 2] No such file or directory system: distro: Ubuntu codename: lucid architecture: i686 kernel: 2.6.32-23-generic To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/607061/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 117327] Re: Can't use the lowest brightness setting
** Changed in: linux (Ubuntu) Assignee: (unassigned) => Chintana Prabhu (chintanarp98) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/117327 Title: Can't use the lowest brightness setting Status in Linux: In Progress Status in linux package in Ubuntu: Incomplete Status in linux-source-2.6.22 package in Ubuntu: Won't Fix Bug description: Sony TX series and possible many other Sony laptops couldn't use the lowest brightness setting because the default sony_acpi.c restrict the lowest value to one instead of zero. This could save some energy so the difference between Linux and Windows isn't that high any more. I have always patched the sony_acpi.c on my own but since this module isn't integrated in linux.source anymore it is much more harder without recompiling the whole kernel. If there is any Sony laptop which haven't zero as the lowest value it should be no problem since a bug in /etc/acpi/sonybright.sh sets brightness on the lowest option to 33 (which is out of bound 0-8) instead of zero because of spicctrl which seems to have no impact. Of course the /etc/acpi/sonybright.sh of the acpi-support package have to be patched too. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/117327/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1283938] Re: [Samsung NP535U4X-S01TH] Ubuntu 14.04 blank screen after wakeup from sleep
Please fix this guys, It's killed a work system for many. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1283938 Title: [Samsung NP535U4X-S01TH] Ubuntu 14.04 blank screen after wakeup from sleep Status in Linux: Unknown Status in linux package in Ubuntu: Incomplete Bug description: HOW TO REPRODUCE 1. Suspend the device 2. Wake it up EXPECTED BEHAVIOUR - The device to resume normally REAL BEHAVIOUR - The screen goes blank RELEVANT DETAILS - In the "/etc/default/grub" file; changing "quiet splash" option to "nomodeset" allows the wakeup, but the computer gets so slow it is unusable. WORKAROUND: Install fglrx. Unverified WORKAROUND: Revert commit 6c7bccea390853bdec5b76fe31fc50f3b36f75d5 as per https://bugzilla.kernel.org/show_bug.cgi?id=76761#c3 . ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xserver-xorg-video-ati 1:7.3.0-1ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-11.31-generic 3.13.3 Uname: Linux 3.13.0-11-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.13.2-0ubuntu5 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Mon Feb 24 12:58:07 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: virtualbox, 4.3.6, 3.13.0-11-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7500G] [1002:990a] (prog-if 00 [VGA controller]) Subsystem: Samsung Electronics Co Ltd Device [144d:c660] Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7550M/7570M/7650M] [1002:6841] (rev ff) (prog-if ff) InstallationDate: Installed on 2014-02-22 (1 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha amd64 (20140218) MachineType: SAMSUNG ELECTRONICS CO., LTD. 535U4C ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-11-generic root=UUID=9f8c7e92-a6ea-41fd-9489-a256c8b9f5d5 ro quiet splash vt.handoff=7 SourcePackage: xserver-xorg-video-ati UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/03/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P06RAF.N93.130403.LEO dmi.board.asset.tag: No Asset Tag dmi.board.name: NP535U4X-S01TH dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SEC_SW_REVISION_1234567890ABCD dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP06RAF.N93.130403.LEO:bd04/03/2013:svnSAMSUNGELECTRONICSCO.,LTD.:pn535U4C:pvrP06RAF:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP535U4X-S01TH:rvrSEC_SW_REVISION_1234567890ABCD:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A: dmi.product.name: 535U4C dmi.product.version: P06RAF dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. version.compiz: compiz 1:0.9.11+14.04.20140218-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.0~rc1-1ubuntu4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.0~rc1-1ubuntu4 version.xserver-xorg-core: xserver-xorg-core 2:1.15.0-1ubuntu6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Mon Feb 24 12:54:54 2014 xserver.configfile: default xserver.errors: RADEON(G0): [XvMC] Failed to initialize extension. xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.15.0-1ubuntu6 xserver.video_driver: radeon To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1283938/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503164] [NEW] The size of the log files in /var/log gets out of hand
Public bug reported: Thankfully it's a rare problem, but anyway: some errors create huge log files, causing rapid loss of disk space. ** Affects: linux (Ubuntu) Importance: Undecided Assignee: Abhilash (abhilashkonnur1) Status: New ** Changed in: linux (Ubuntu) Assignee: (unassigned) => Abhilash (abhilashkonnur1) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1503164 Title: The size of the log files in /var/log gets out of hand Status in linux package in Ubuntu: New Bug description: Thankfully it's a rare problem, but anyway: some errors create huge log files, causing rapid loss of disk space. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1503164/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503164] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. >From a terminal window please run: apport-collect 1503164 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1503164 Title: The size of the log files in /var/log gets out of hand Status in linux package in Ubuntu: Incomplete Bug description: Thankfully it's a rare problem, but anyway: some errors create huge log files, causing rapid loss of disk space. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1503164/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503105] Re: linux-armadaxp: 3.2.0-1657.79 -proposed tracker
All builds are complete, packages in this bug can be copied to -proposed. ** Changed in: kernel-sru-workflow/prepare-package Status: New => Fix Released ** Changed in: kernel-sru-workflow/prepare-package Assignee: Canonical Hardware Enablement ARM Kernel (canonical-hwe-arm-kernel) => Ike Panhc (ikepanhc) ** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Fix Released ** Changed in: kernel-sru-workflow/prepare-package-meta Assignee: Canonical Hardware Enablement ARM Kernel (canonical-hwe-arm-kernel) => Ike Panhc (ikepanhc) ** Changed in: kernel-sru-workflow/promote-to-proposed Status: New => Confirmed ** Description changed: This bug is for tracking the 3.2.0-1657.79 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 06. October 2015 03:02 UTC - kernel-stable-phase:Prepare - kernel-stable-phase-changed:Tuesday, 06. October 2015 03:02 UTC kernel-stable-master-bug:1500854 kernel-stable-Certification-testing-end:Tuesday, 06. October 2015 06:01 UTC kernel-stable-Security-signoff-end:Tuesday, 06. October 2015 06:01 UTC + kernel-stable-phase:CopyToProposed + kernel-stable-Prepare-package-end:Tuesday, 06. October 2015 08:01 UTC + kernel-stable-Promote-to-proposed-start:Tuesday, 06. October 2015 08:01 UTC + kernel-stable-phase-changed:Tuesday, 06. October 2015 08:01 UTC -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/1503105 Title: linux-armadaxp: 3.2.0-1657.79 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: Invalid Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Confirmed Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: New Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: New Status in linux-armadaxp package in Ubuntu: Invalid Status in linux-armadaxp source package in Precise: In Progress Bug description: This bug is for tracking the 3.2.0-1657.79 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 06. October 2015 03:02 UTC kernel-stable-master-bug:1500854 kernel-stable-Certification-testing-end:Tuesday, 06. October 2015 06:01 UTC kernel-stable-Security-signoff-end:Tuesday, 06. October 2015 06:01 UTC kernel-stable-phase:CopyToProposed kernel-stable-Prepare-package-end:Tuesday, 06. October 2015 08:01 UTC kernel-stable-Promote-to-proposed-start:Tuesday, 06. October 2015 08:01 UTC kernel-stable-phase-changed:Tuesday, 06. October 2015 08:01 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1503105/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] [NEW] Brightness HotKeys not Detected
You have been subscribed to a public bug: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- Brightness HotKeys not Detected https://bugs.launchpad.net/bugs/1500344 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] Re: Brightness HotKeys not Detected
Thank you. This needs to be fixed in the kernel driver then, as without a scan code there is nothing we can do in userspace. ** Package changed: systemd (Ubuntu) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: Incomplete => New ** Summary changed: - Brightness HotKeys not Detected + [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: New Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1500344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1381625] Re: Adjust brightness to lowest value caused screen whole black
** Changed in: linux (Ubuntu) Assignee: (unassigned) => Tejal (tejalravih) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1381625 Title: Adjust brightness to lowest value caused screen whole black Status in HWE Next: Confirmed Status in linux package in Ubuntu: Confirmed Status in unity-settings-daemon package in Ubuntu: Confirmed Bug description: [Impact] When adjusting screen brightness to lowest value, it turns screen backlight off. [Test Case] 1. Install Image 2. Press System's brightness hotkey to adjust the brightness level to the lowest or 3. Go to System "Settings" -> "Brightness & Lock" to adjust brightness level to the lowest 4. Check if the screen display still has backlight Expected results: There is still screen backlight Actual results: Sceen backlight is turned off To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1381625/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. >From a terminal window please run: apport-collect 1500344 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: Incomplete Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1500344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503118] Re: linux-lts-trusty: 3.13.0-66.107~precise1 -proposed tracker
** Changed in: linux-lts-trusty (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1503118 Title: linux-lts-trusty: 3.13.0-66.107~precise1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: New Status in Kernel SRU Workflow certification-testing series: New Status in Kernel SRU Workflow prepare-package series: New Status in Kernel SRU Workflow prepare-package-meta series: New Status in Kernel SRU Workflow prepare-package-signed series: New Status in Kernel SRU Workflow promote-to-proposed series: New Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: New Status in Kernel SRU Workflow security-signoff series: New Status in Kernel SRU Workflow verification-testing series: New Status in linux-lts-trusty package in Ubuntu: Invalid Status in linux-lts-trusty source package in Precise: New Bug description: This bug is for tracking the 3.13.0-66.107~precise1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 06. October 2015 04:02 UTC kernel-stable-phase:Prepare kernel-stable-phase-changed:Tuesday, 06. October 2015 04:02 UTC kernel-stable-master-bug:1503021 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1503118/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1502658] Re: unable to read xattr id index table
** Changed in: linux (Ubuntu) Assignee: (unassigned) => ShRev (shradhavrevankar) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1502658 Title: unable to read xattr id index table Status in linux package in Ubuntu: Incomplete Bug description: when we are updating the vmware tool for linux software it wil instal after that we get bugs(error) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1502658/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1501231] Re: php5-fpm keeps crashing after update
Backtrace from core-dump: #0 _zend_mm_free_int (heap=0x2278300, p=0x7f507bfd62f0) at /build/php5-iwKH5X/php5-5.5.9+dfsg/Zend/zend_alloc.c:2104 #1 0x00696854 in sapi_deactivate () at /build/php5-iwKH5X/php5-5.5.9+dfsg/main/SAPI.c:524 #2 0x0068e145 in php_request_shutdown (dummy=dummy@entry=0x0) at /build/php5-iwKH5X/php5-5.5.9+dfsg/main/main.c:1817 #3 0x004634d4 in main (argc=, argv=) at /build/php5-iwKH5X/php5-5.5.9+dfsg/sapi/fpm/fpm/fpm_main.c:1961 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1501231 Title: php5-fpm keeps crashing after update Status in linux package in Ubuntu: Incomplete Bug description: After upgrading to: PHP 5.5.9-1ubuntu4.12 (fpm-fcgi) (built: Aug 13 2015 22:37:19) php5-fpm keeps crashing every time a php page is accessed: kernel: [ 142.905702] traps: php5-fpm[1565] general protection ip:6c5a71 sp:7fff73fcf6b0 error:0 in php5-fpm[40+7fe000] kernel: [ 178.841790] traps: php5-fpm[2294] general protection ip:6c5a71 sp:7fff73fcf6b0 error:0 in php5-fpm[40+7fe000] Ubuntu version: Ubuntu 14.04.3 LTS Package version: php5-fpm: Installed: 5.5.9+dfsg-1ubuntu4.12 Candidate: 5.5.9+dfsg-1ubuntu4.12 Version table: *** 5.5.9+dfsg-1ubuntu4.12 0 500 http://mt.archive.ubuntu.com/ubuntu/ trusty-updates/universe amd64 Packages 100 /var/lib/dpkg/status Nginx in use: nginx: Installed: (none) Candidate: 1:1.8.0-8.5.0.20~trusty1 As a result I'm unable to render any php page. Kernel in use: Ubuntu 3.13.0-33.58-generic 3.13.11.4 php5-fpm doesn't report any issue in its log file, everything is trapped at the kernel level. Please let me know what type of additional info you might need to investigate this issue. Thank you --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Sep 30 10:32 seq crw-rw 1 root audio 116, 33 Sep 30 10:32 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.15 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 14.04 EcryptfsInUse: Yes HibernationDevice: RESUME=/dev/mapper/services--vg-swap_1 InstallationDate: Installed on 2014-06-06 (480 days ago) InstallationMedia: Ubuntu-Server 14.04 LTS "Trusty Tahr" - Release amd64 (20140416.2) IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: VMware, Inc. VMware Virtual Platform Package: linux (not installed) PciMultimedia: ProcEnviron: LANGUAGE=en_US:en TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 svgadrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-33-generic root=/dev/mapper/services--vg-root ro ProcVersionSignature: Ubuntu 3.13.0-33.58-generic 3.13.11.4 RelatedPackageVersions: linux-restricted-modules-3.13.0-33-generic N/A linux-backports-modules-3.13.0-33-generic N/A linux-firmware 1.127.15 RfKill: Error: [Errno 2] No such file or directory Tags: trusty Uname: Linux 3.13.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 07/30/2013 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd07/30/2013:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1501231/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1502630] Re: Screen brightness cannot be changed
** Changed in: linux (Ubuntu) Assignee: (unassigned) => Faraaz Ahmed (faraazahmed1994) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1502630 Title: Screen brightness cannot be changed Status in linux package in Ubuntu: Incomplete Bug description: The screen brightness cannot be changed via the shortcut keys provided nor through the system setting menu. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1502630/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503127] Re: linux-lts-vivid: 3.19.0-31.35~14.04.1 -proposed tracker
** Changed in: linux-lts-vivid (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-vivid in Ubuntu. https://bugs.launchpad.net/bugs/1503127 Title: linux-lts-vivid: 3.19.0-31.35~14.04.1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: New Status in Kernel SRU Workflow certification-testing series: New Status in Kernel SRU Workflow prepare-package series: New Status in Kernel SRU Workflow prepare-package-meta series: New Status in Kernel SRU Workflow prepare-package-signed series: New Status in Kernel SRU Workflow promote-to-proposed series: New Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: New Status in Kernel SRU Workflow security-signoff series: New Status in Kernel SRU Workflow verification-testing series: New Status in linux-lts-vivid package in Ubuntu: Invalid Status in linux-lts-vivid source package in Trusty: New Bug description: This bug is for tracking the 3.19.0-31.35~14.04.1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 06. October 2015 05:00 UTC kernel-stable-phase:Prepare kernel-stable-phase-changed:Tuesday, 06. October 2015 05:00 UTC kernel-stable-master-bug:1503005 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1503127/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503208] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. >From a terminal window please run: apport-collect 1503208 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1503208 Title: Battery indicator does not display the right information. Status in linux package in Ubuntu: Incomplete Bug description: Sometimes the amount of battery life left is shown as a huge value,which is not true. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1503208/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503208] [NEW] Battery indicator does not display the right information.
Public bug reported: Sometimes the amount of battery life left is shown as a huge value,which is not true. ** Affects: linux (Ubuntu) Importance: Undecided Assignee: Faraaz Ahmed (faraazahmed1994) Status: Incomplete ** Changed in: linux (Ubuntu) Assignee: (unassigned) => Faraaz Ahmed (faraazahmed1994) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1503208 Title: Battery indicator does not display the right information. Status in linux package in Ubuntu: Incomplete Bug description: Sometimes the amount of battery life left is shown as a huge value,which is not true. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1503208/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503118] Re: linux-lts-trusty: 3.13.0-66.107~precise1 -proposed tracker
** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Fix Released ** Changed in: kernel-sru-workflow/prepare-package-meta Assignee: Canonical Kernel Team (canonical-kernel-team) => Luis Henriques (henrix) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1503118 Title: linux-lts-trusty: 3.13.0-66.107~precise1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: New Status in Kernel SRU Workflow certification-testing series: New Status in Kernel SRU Workflow prepare-package series: New Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: New Status in Kernel SRU Workflow promote-to-proposed series: New Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: New Status in Kernel SRU Workflow security-signoff series: New Status in Kernel SRU Workflow verification-testing series: New Status in linux-lts-trusty package in Ubuntu: Invalid Status in linux-lts-trusty source package in Precise: New Bug description: This bug is for tracking the 3.13.0-66.107~precise1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 06. October 2015 04:02 UTC kernel-stable-phase:Prepare kernel-stable-phase-changed:Tuesday, 06. October 2015 04:02 UTC kernel-stable-master-bug:1503021 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1503118/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1500344/+attachment/4485757/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: Confirmed Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic --- ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: effleurager 1129 F pulseaudio /dev/snd/controlC1: effleurager 1129 F pulseaudio CRDA: country ZA: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A) (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS CurrentDesktop: GNOME DistroRelease: Ubuntu 15.04 InstallationDate: Installed on 2015-09-28 (7 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. X555LAB Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1d717e99-1936-4074-a5ce-8c8fe38b0754 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 RelatedPackageVersions: linux-restricted-modules-3.19.0-30-generic N/A linux-backports-modules-3.19.0-30-generic N/A linux-firmware 1.143.3 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X555LAB.303 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X555LAB dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX555LAB.303:bd12/19/2014:svnASUSTeKCOMPUTERINC.:pnX555LAB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555LAB:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X555LAB dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1500344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] Re: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event
apport information ** Tags added: apport-collected vivid ** Description changed: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic + --- + ApportVersion: 2.17.2-0ubuntu1.5 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: effleurager 1129 F pulseaudio + /dev/snd/controlC1: effleurager 1129 F pulseaudio + CRDA: + country ZA: DFS-ETSI + (2402 - 2482 @ 40), (N/A, 20), (N/A) + (5170 - 5250 @ 80), (N/A, 20), (N/A) + (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS + (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS + CurrentDesktop: GNOME + DistroRelease: Ubuntu 15.04 + InstallationDate: Installed on 2015-09-28 (7 days ago) + InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) + MachineType: ASUSTeK COMPUTER INC. X555LAB + Package: linux (not installed) + ProcFB: 0 inteldrmfb + ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1d717e99-1936-4074-a5ce-8c8fe38b0754 ro quiet splash vt.handoff=7 + ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 + RelatedPackageVersions: + linux-restricted-modules-3.19.0-30-generic N/A + linux-backports-modules-3.19.0-30-generic N/A + linux-firmware 1.143.3 + Tags: vivid + UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' + Uname: Linux 3.19.0-30-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo + _MarkForUpload: True + dmi.bios.date: 12/19/2014 + dmi.bios.vendor: American Megatrends Inc. + dmi.bios.version: X555LAB.303 + dmi.board.asset.tag: ATN12345678901234567 + dmi.board.name: X555LAB + dmi.board.vendor: ASUSTeK COMPUTER INC. + dmi.board.version: 1.0 + dmi.chassis.asset.tag: No Asset Tag + dmi.chassis.type: 10 + dmi.chassis.vendor: ASUSTeK COMPUTER INC. + dmi.chassis.version: 1.0 + dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX555LAB.303:bd12/19/2014:svnASUSTeKCOMPUTERINC.:pnX555LAB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555LAB:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: + dmi.product.name: X555LAB + dmi.product.version: 1.0 + dmi.sys.vendor: ASUSTeK COMPUTER INC. ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1500344/+attachment/4485753/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: Confirmed Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic --- ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: effleurager 1129 F pulseaudio /dev/snd/controlC1: effleurager 1129 F pulseaudio CRDA: country ZA: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A) (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS CurrentDesktop: GNOME DistroRelease: Ubuntu 15.04 InstallationDate: Installed on 2015-09-28 (7 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. X555LAB Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1d717e99-1936-4074-a5ce-8c8fe38b0754 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 RelatedPackageVersions: linux-restricted-modules-3.19.0-30-generic N/A linux-backports-modules-3.19.0-30-generic N/A linux-firmware 1.143.3 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X555LAB.303 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X555LAB dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX555LAB.303:bd12/19/2014:svnASUSTeKCOMPUTERINC.:pnX555LAB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555LAB:r
[Kernel-packages] [Bug 1500344] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1500344/+attachment/4485755/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: Confirmed Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic --- ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: effleurager 1129 F pulseaudio /dev/snd/controlC1: effleurager 1129 F pulseaudio CRDA: country ZA: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A) (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS CurrentDesktop: GNOME DistroRelease: Ubuntu 15.04 InstallationDate: Installed on 2015-09-28 (7 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. X555LAB Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1d717e99-1936-4074-a5ce-8c8fe38b0754 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 RelatedPackageVersions: linux-restricted-modules-3.19.0-30-generic N/A linux-backports-modules-3.19.0-30-generic N/A linux-firmware 1.143.3 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X555LAB.303 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X555LAB dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX555LAB.303:bd12/19/2014:svnASUSTeKCOMPUTERINC.:pnX555LAB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555LAB:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X555LAB dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1500344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1500344/+attachment/4485754/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: Confirmed Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic --- ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: effleurager 1129 F pulseaudio /dev/snd/controlC1: effleurager 1129 F pulseaudio CRDA: country ZA: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A) (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS CurrentDesktop: GNOME DistroRelease: Ubuntu 15.04 InstallationDate: Installed on 2015-09-28 (7 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. X555LAB Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1d717e99-1936-4074-a5ce-8c8fe38b0754 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 RelatedPackageVersions: linux-restricted-modules-3.19.0-30-generic N/A linux-backports-modules-3.19.0-30-generic N/A linux-firmware 1.143.3 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X555LAB.303 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X555LAB dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX555LAB.303:bd12/19/2014:svnASUSTeKCOMPUTERINC.:pnX555LAB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555LAB:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X555LAB dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1500344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] JournalErrors.txt
apport information ** Attachment added: "JournalErrors.txt" https://bugs.launchpad.net/bugs/1500344/+attachment/4485756/+files/JournalErrors.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: Confirmed Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic --- ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: effleurager 1129 F pulseaudio /dev/snd/controlC1: effleurager 1129 F pulseaudio CRDA: country ZA: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A) (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS CurrentDesktop: GNOME DistroRelease: Ubuntu 15.04 InstallationDate: Installed on 2015-09-28 (7 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. X555LAB Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1d717e99-1936-4074-a5ce-8c8fe38b0754 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 RelatedPackageVersions: linux-restricted-modules-3.19.0-30-generic N/A linux-backports-modules-3.19.0-30-generic N/A linux-firmware 1.143.3 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X555LAB.303 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X555LAB dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX555LAB.303:bd12/19/2014:svnASUSTeKCOMPUTERINC.:pnX555LAB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555LAB:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X555LAB dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1500344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1500344/+attachment/4485762/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: Confirmed Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic --- ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: effleurager 1129 F pulseaudio /dev/snd/controlC1: effleurager 1129 F pulseaudio CRDA: country ZA: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A) (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS CurrentDesktop: GNOME DistroRelease: Ubuntu 15.04 InstallationDate: Installed on 2015-09-28 (7 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. X555LAB Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1d717e99-1936-4074-a5ce-8c8fe38b0754 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 RelatedPackageVersions: linux-restricted-modules-3.19.0-30-generic N/A linux-backports-modules-3.19.0-30-generic N/A linux-firmware 1.143.3 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X555LAB.303 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X555LAB dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX555LAB.303:bd12/19/2014:svnASUSTeKCOMPUTERINC.:pnX555LAB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555LAB:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X555LAB dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1500344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1500344/+attachment/4485760/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: Confirmed Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic --- ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: effleurager 1129 F pulseaudio /dev/snd/controlC1: effleurager 1129 F pulseaudio CRDA: country ZA: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A) (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS CurrentDesktop: GNOME DistroRelease: Ubuntu 15.04 InstallationDate: Installed on 2015-09-28 (7 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. X555LAB Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1d717e99-1936-4074-a5ce-8c8fe38b0754 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 RelatedPackageVersions: linux-restricted-modules-3.19.0-30-generic N/A linux-backports-modules-3.19.0-30-generic N/A linux-firmware 1.143.3 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X555LAB.303 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X555LAB dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX555LAB.303:bd12/19/2014:svnASUSTeKCOMPUTERINC.:pnX555LAB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555LAB:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X555LAB dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1500344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1500344/+attachment/4485758/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: Confirmed Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic --- ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: effleurager 1129 F pulseaudio /dev/snd/controlC1: effleurager 1129 F pulseaudio CRDA: country ZA: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A) (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS CurrentDesktop: GNOME DistroRelease: Ubuntu 15.04 InstallationDate: Installed on 2015-09-28 (7 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. X555LAB Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1d717e99-1936-4074-a5ce-8c8fe38b0754 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 RelatedPackageVersions: linux-restricted-modules-3.19.0-30-generic N/A linux-backports-modules-3.19.0-30-generic N/A linux-firmware 1.143.3 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X555LAB.303 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X555LAB dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX555LAB.303:bd12/19/2014:svnASUSTeKCOMPUTERINC.:pnX555LAB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555LAB:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X555LAB dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1500344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1500344/+attachment/4485761/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: Confirmed Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic --- ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: effleurager 1129 F pulseaudio /dev/snd/controlC1: effleurager 1129 F pulseaudio CRDA: country ZA: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A) (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS CurrentDesktop: GNOME DistroRelease: Ubuntu 15.04 InstallationDate: Installed on 2015-09-28 (7 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. X555LAB Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1d717e99-1936-4074-a5ce-8c8fe38b0754 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 RelatedPackageVersions: linux-restricted-modules-3.19.0-30-generic N/A linux-backports-modules-3.19.0-30-generic N/A linux-firmware 1.143.3 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X555LAB.303 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X555LAB dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX555LAB.303:bd12/19/2014:svnASUSTeKCOMPUTERINC.:pnX555LAB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555LAB:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X555LAB dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1500344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1500344/+attachment/4485763/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: Confirmed Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic --- ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: effleurager 1129 F pulseaudio /dev/snd/controlC1: effleurager 1129 F pulseaudio CRDA: country ZA: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A) (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS CurrentDesktop: GNOME DistroRelease: Ubuntu 15.04 InstallationDate: Installed on 2015-09-28 (7 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. X555LAB Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1d717e99-1936-4074-a5ce-8c8fe38b0754 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 RelatedPackageVersions: linux-restricted-modules-3.19.0-30-generic N/A linux-backports-modules-3.19.0-30-generic N/A linux-firmware 1.143.3 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X555LAB.303 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X555LAB dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX555LAB.303:bd12/19/2014:svnASUSTeKCOMPUTERINC.:pnX555LAB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555LAB:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X555LAB dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1500344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1500344/+attachment/4485765/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: Confirmed Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic --- ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: effleurager 1129 F pulseaudio /dev/snd/controlC1: effleurager 1129 F pulseaudio CRDA: country ZA: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A) (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS CurrentDesktop: GNOME DistroRelease: Ubuntu 15.04 InstallationDate: Installed on 2015-09-28 (7 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. X555LAB Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1d717e99-1936-4074-a5ce-8c8fe38b0754 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 RelatedPackageVersions: linux-restricted-modules-3.19.0-30-generic N/A linux-backports-modules-3.19.0-30-generic N/A linux-firmware 1.143.3 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X555LAB.303 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X555LAB dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX555LAB.303:bd12/19/2014:svnASUSTeKCOMPUTERINC.:pnX555LAB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555LAB:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X555LAB dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1500344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1500344/+attachment/4485766/+files/WifiSyslog.txt ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: Confirmed Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic --- ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: effleurager 1129 F pulseaudio /dev/snd/controlC1: effleurager 1129 F pulseaudio CRDA: country ZA: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A) (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS CurrentDesktop: GNOME DistroRelease: Ubuntu 15.04 InstallationDate: Installed on 2015-09-28 (7 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. X555LAB Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1d717e99-1936-4074-a5ce-8c8fe38b0754 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 RelatedPackageVersions: linux-restricted-modules-3.19.0-30-generic N/A linux-backports-modules-3.19.0-30-generic N/A linux-firmware 1.143.3 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X555LAB.303 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X555LAB dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX555LAB.303:bd12/19/2014:svnASUSTeKCOMPUTERINC.:pnX555LAB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555LAB:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X555LAB dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1500344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1500344/+attachment/4485759/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: Confirmed Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic --- ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: effleurager 1129 F pulseaudio /dev/snd/controlC1: effleurager 1129 F pulseaudio CRDA: country ZA: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A) (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS CurrentDesktop: GNOME DistroRelease: Ubuntu 15.04 InstallationDate: Installed on 2015-09-28 (7 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. X555LAB Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1d717e99-1936-4074-a5ce-8c8fe38b0754 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 RelatedPackageVersions: linux-restricted-modules-3.19.0-30-generic N/A linux-backports-modules-3.19.0-30-generic N/A linux-firmware 1.143.3 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X555LAB.303 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X555LAB dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX555LAB.303:bd12/19/2014:svnASUSTeKCOMPUTERINC.:pnX555LAB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555LAB:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X555LAB dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1500344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500344] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1500344/+attachment/4485764/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500344 Title: [ASUSTeK X555-50] Brightness hotkeys do not produce evdev event Status in linux package in Ubuntu: Confirmed Bug description: The brightness can be changed through commands, however the brightness keys fn+f6 (brighter) and fn+f5 (dimmer) are not detected by acpi_listen, thus the hotkey functions do not activate. Ubuntu 15.04, 3.19.0-28-generic --- ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: effleurager 1129 F pulseaudio /dev/snd/controlC1: effleurager 1129 F pulseaudio CRDA: country ZA: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A) (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS CurrentDesktop: GNOME DistroRelease: Ubuntu 15.04 InstallationDate: Installed on 2015-09-28 (7 days ago) InstallationMedia: Ubuntu-GNOME 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. X555LAB Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1d717e99-1936-4074-a5ce-8c8fe38b0754 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6 RelatedPackageVersions: linux-restricted-modules-3.19.0-30-generic N/A linux-backports-modules-3.19.0-30-generic N/A linux-firmware 1.143.3 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X555LAB.303 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X555LAB dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX555LAB.303:bd12/19/2014:svnASUSTeKCOMPUTERINC.:pnX555LAB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX555LAB:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X555LAB dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1500344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503214] [NEW] Can't input password to decrypt disk at boot
Public bug reported: Hello, Ever since I upgraded to kernel 3.19.0-30 i can't input the disk password at boot, in order to have the disk decrypted. The workaround it to boot with kernel-3.19.0-28 which works. When booting with 3.19.0-30 whatever I type won't showup. CTRL+ALT+DEL would reboot the machine though. My machine is a Dell XPS 13" (2015). ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-28-generic 3.19.0-28.30 ProcVersionSignature: Ubuntu 3.19.0-28.30-generic 3.19.8-ckt5 Uname: Linux 3.19.0-28-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: radu 1302 F pulseaudio /dev/snd/controlC0: radu 1302 F pulseaudio CurrentDesktop: XFCE Date: Tue Oct 6 13:06:11 2015 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=9221aee5-1069-4140-ae9f-623b4238fa4d InstallationDate: Installed on 2015-07-21 (77 days ago) InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1) MachineType: Dell Inc. XPS 13 9343 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-28-generic.efi.signed root=/dev/mapper/xubuntu--vg-root ro quiet splash RelatedPackageVersions: linux-restricted-modules-3.19.0-28-generic N/A linux-backports-modules-3.19.0-28-generic N/A linux-firmware 1.143.3 SourcePackage: linux UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/14/2015 dmi.bios.vendor: Dell Inc. dmi.bios.version: A05 dmi.board.name: 0TM99H dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA05:bd07/14/2015:svnDellInc.:pnXPS139343:pvr:rvnDellInc.:rn0TM99H:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: XPS 13 9343 dmi.sys.vendor: Dell Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug vivid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1503214 Title: Can't input password to decrypt disk at boot Status in linux package in Ubuntu: New Bug description: Hello, Ever since I upgraded to kernel 3.19.0-30 i can't input the disk password at boot, in order to have the disk decrypted. The workaround it to boot with kernel-3.19.0-28 which works. When booting with 3.19.0-30 whatever I type won't showup. CTRL+ALT+DEL would reboot the machine though. My machine is a Dell XPS 13" (2015). ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-28-generic 3.19.0-28.30 ProcVersionSignature: Ubuntu 3.19.0-28.30-generic 3.19.8-ckt5 Uname: Linux 3.19.0-28-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: radu 1302 F pulseaudio /dev/snd/controlC0: radu 1302 F pulseaudio CurrentDesktop: XFCE Date: Tue Oct 6 13:06:11 2015 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=9221aee5-1069-4140-ae9f-623b4238fa4d InstallationDate: Installed on 2015-07-21 (77 days ago) InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1) MachineType: Dell Inc. XPS 13 9343 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-28-generic.efi.signed root=/dev/mapper/xubuntu--vg-root ro quiet splash RelatedPackageVersions: linux-restricted-modules-3.19.0-28-generic N/A linux-backports-modules-3.19.0-28-generic N/A linux-firmware 1.143.3 SourcePackage: linux UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/14/2015 dmi.bios.vendor: Dell Inc. dmi.bios.version: A05 dmi.board.name: 0TM99H dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA05:bd07/14/2015:svnDellInc.:pnXPS139343:pvr:rvnDellInc.:rn0TM99H:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: XPS 13 9343 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1503214/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503218] [NEW] debian-installer: review our d-i config in relation to generated modules
Public bug reported: We have not recently reviewed the modules included in the d-i udebs. Review them. ** Affects: linux (Ubuntu) Importance: Medium Assignee: Andy Whitcroft (apw) Status: Triaged ** Changed in: linux (Ubuntu) Status: New => Triaged ** Changed in: linux (Ubuntu) Importance: Undecided => Medium ** Changed in: linux (Ubuntu) Assignee: (unassigned) => Andy Whitcroft (apw) ** Changed in: linux (Ubuntu) Milestone: None => ubuntu-15.10 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1503218 Title: debian-installer: review our d-i config in relation to generated modules Status in linux package in Ubuntu: Triaged Bug description: We have not recently reviewed the modules included in the d-i udebs. Review them. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1503218/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503214] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1503214 Title: Can't input password to decrypt disk at boot Status in linux package in Ubuntu: Confirmed Bug description: Hello, Ever since I upgraded to kernel 3.19.0-30 i can't input the disk password at boot, in order to have the disk decrypted. The workaround it to boot with kernel-3.19.0-28 which works. When booting with 3.19.0-30 whatever I type won't showup. CTRL+ALT+DEL would reboot the machine though. My machine is a Dell XPS 13" (2015). ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-28-generic 3.19.0-28.30 ProcVersionSignature: Ubuntu 3.19.0-28.30-generic 3.19.8-ckt5 Uname: Linux 3.19.0-28-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: radu 1302 F pulseaudio /dev/snd/controlC0: radu 1302 F pulseaudio CurrentDesktop: XFCE Date: Tue Oct 6 13:06:11 2015 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=9221aee5-1069-4140-ae9f-623b4238fa4d InstallationDate: Installed on 2015-07-21 (77 days ago) InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1) MachineType: Dell Inc. XPS 13 9343 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-28-generic.efi.signed root=/dev/mapper/xubuntu--vg-root ro quiet splash RelatedPackageVersions: linux-restricted-modules-3.19.0-28-generic N/A linux-backports-modules-3.19.0-28-generic N/A linux-firmware 1.143.3 SourcePackage: linux UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/14/2015 dmi.bios.vendor: Dell Inc. dmi.bios.version: A05 dmi.board.name: 0TM99H dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA05:bd07/14/2015:svnDellInc.:pnXPS139343:pvr:rvnDellInc.:rn0TM99H:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: XPS 13 9343 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1503214/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503239] [NEW] linux-lts-utopic: 3.16.0-51.68~14.04.1 -proposed tracker
Public bug reported: This bug is for tracking the 3.16.0-51.68~14.04.1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 06. October 2015 11:00 UTC kernel-stable-phase:Prepare kernel-stable-phase-changed:Tuesday, 06. October 2015 11:00 UTC ** Affects: kernel-sru-workflow Importance: Medium Status: In Progress ** Affects: kernel-sru-workflow/automated-testing Importance: Medium Assignee: Canonical Kernel Team (canonical-kernel-team) Status: New ** Affects: kernel-sru-workflow/certification-testing Importance: Medium Assignee: Canonical Hardware Certification (canonical-hw-cert) Status: New ** Affects: kernel-sru-workflow/prepare-package Importance: Medium Assignee: Canonical Kernel Team (canonical-kernel-team) Status: New ** Affects: kernel-sru-workflow/prepare-package-meta Importance: Medium Assignee: Canonical Kernel Team (canonical-kernel-team) Status: New ** Affects: kernel-sru-workflow/prepare-package-signed Importance: Medium Assignee: Canonical Kernel Team (canonical-kernel-team) Status: New ** Affects: kernel-sru-workflow/promote-to-proposed Importance: Medium Assignee: Ubuntu Stable Release Updates Team (ubuntu-sru) Status: New ** Affects: kernel-sru-workflow/promote-to-security Importance: Medium Assignee: Ubuntu Stable Release Updates Team (ubuntu-sru) Status: New ** Affects: kernel-sru-workflow/promote-to-updates Importance: Medium Assignee: Ubuntu Stable Release Updates Team (ubuntu-sru) Status: New ** Affects: kernel-sru-workflow/regression-testing Importance: Medium Assignee: Canonical Platform QA Team (canonical-platform-qa) Status: New ** Affects: kernel-sru-workflow/security-signoff Importance: Medium Assignee: Canonical Security Team (canonical-security) Status: New ** Affects: kernel-sru-workflow/verification-testing Importance: Medium Assignee: Canonical Kernel Team (canonical-kernel-team) Status: New ** Affects: linux-lts-utopic (Ubuntu) Importance: Medium Status: Invalid ** Affects: linux-lts-utopic (Ubuntu Trusty) Importance: Medium Status: New ** Tags: block-proposed-trusty kernel-release-tracking-bug trusty ** Tags added: kernel-release-tracking-bug ** Tags added: block-proposed-trusty ** Also affects: linux-lts-utopic (Ubuntu Trusty) Importance: Undecided Status: New ** Tags added: trusty ** Also affects: kernel-sru-workflow/automated-testing Importance: Undecided Status: New ** Also affects: kernel-sru-workflow/certification-testing Importance: Undecided Status: New ** Also affects: kernel-sru-workflow/prepare-package Importance: Undecided Status: New ** Also affects: kernel-sru-workflow/prepare-package-meta Importance: Undecided Status: New ** Also affects: kernel-sru-workflow/prepare-package-signed Importance: Undecided Status: New ** Also affects: kernel-sru-workflow/promote-to-proposed Importance: Undecided Status: New ** Also affects: kernel-sru-workflow/promote-to-security Importance: Undecided Status: New ** Also affects: kernel-sru-workflow/promote-to-updates Importance: Undecided Status: New ** Also affects: kernel-sru-workflow/regression-testing Importance: Undecided Status: New ** Also affects: kernel-sru-workflow/security-signoff Importance: Undecided Status: New ** Also affects: kernel-sru-workflow/verification-testing Importance: Undecided Status: New ** Changed in: kernel-sru-workflow Status: New => In Progress ** Changed in: kernel-sru-workflow Importance: Undecided => Medium ** Changed in: kernel-sru-workflow/automated-testing Importance: Undecided => Medium ** Changed in: kernel-sru-workflow/automated-testing Assignee: (unassigned) => Canonical Kernel Team (canonical-kernel-team) ** Changed in: kernel-sru-workflow/certification-testing Importance: Undecided => Medium ** Changed in: kernel-sru-workflow/certification-testing Assignee: (unassigned) => Canonical Hardware Certification (canonical-hw-cert) ** Changed in: kernel-sru-workflow/prepare-package Importance: Undecided => Medium ** Changed in: kernel-sru-workflow/prepare-package Assignee: (unassigned) => Canonical Kernel Team (canonical-kernel-team) ** Changed in: kernel-sru-workflow/prepare-package-meta Importance: Undecided => Medium ** Changed in: kernel-sru-workflow/prepare-package-meta Assignee: (unassigned) => Canonical Kernel Team (canonical-kernel-team) ** Changed in: kernel-sru-workflow/prepare-package-signed Importance: Undecided => Medium ** Change
[Kernel-packages] [Bug 1500751] Re: Cryptsetup Keyboard not working on Xubuntu 3.19.0-30
This might not be a problem with the kernel, rather with grub. I assume it's grub setting up the splash screen GUI, not the kernel. Just a thought. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500751 Title: Cryptsetup Keyboard not working on Xubuntu 3.19.0-30 Status in cryptsetup package in Ubuntu: Invalid Status in linux package in Ubuntu: In Progress Bug description: I am running Xubuntu 15.04 and just upgraded to the latest kernel (3.19.0-30). After upgrading the boot time is longer (what is negligible) but the more severe error is, that I cannot enter my passphrase when I see the crypt dialog. I just see the dialog to enter my passphrase, but when I try to enter it, nothing appears in the textfield. I tried with the builtin laptop keyboard but also with an external USB keyboard. I thought about supplying more information, but things like the syslog are not helping apparently (I was not able to boot until the syslog would capture information...). If you need anything I can provide, I gladly help. [Test case] 1. On an affected system boot into kernel 3.19.0-30 [Solution] The "solution" for now is booting the older Kernel 3.19.0-28 (which isn't a real solution). PS.: Bugs like the following are either not applicable or the solution is not working for me: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/229732 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1359689 https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1238194 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cryptsetup/+bug/1500751/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1502345] Re: [NOVATECH LTD PERSONAL COMPUTER] suspend/resume failure
Following update to BIOS problem recurred - frozen screen and mouse cursor, keyboard dead. BIOS version F6 08/11/2015 (I presume US-style date). ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1502345 Title: [NOVATECH LTD PERSONAL COMPUTER] suspend/resume failure Status in linux package in Ubuntu: Confirmed Bug description: Crashed on wakiing from Suspend. Had to power off and on. ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-45-generic 3.13.0-45.74 ProcVersionSignature: Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13 Uname: Linux 3.13.0-45-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.14.1-0ubuntu3.15 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: campbell 2747 F pulseaudio /dev/snd/controlC0: campbell 2747 F pulseaudio Date: Fri Oct 2 19:24:41 2015 DuplicateSignature: suspend/resume:NOVATECH LTD PERSONAL COMPUTER:F5 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=b7290e2f-642a-414d-988b-cac7bac6530e InstallationDate: Installed on 2014-09-17 (380 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) InterpreterPath: /usr/bin/python3.4 IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: NOVATECH LTD PERSONAL COMPUTER ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=fc6ea265-b75c-458a-b5d2-2950ebad0828 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-45-generic N/A linux-backports-modules-3.13.0-45-generic N/A linux-firmware 1.127.15 RfKill: SourcePackage: linux Title: [NOVATECH LTD PERSONAL COMPUTER] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 06/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H81M-DS2V dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: xxx-xxx dmi.chassis.type: 3 dmi.chassis.vendor: NOVATECH LTD dmi.chassis.version: V1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF5:bd06/19/2014:svnNOVATECHLTD:pnPERSONALCOMPUTER:pvrV1.0:rvnGigabyteTechnologyCo.,Ltd.:rnH81M-DS2V:rvrTobefilledbyO.E.M.:cvnNOVATECHLTD:ct3:cvrV1.0: dmi.product.name: PERSONAL COMPUTER dmi.product.version: V1.0 dmi.sys.vendor: NOVATECH LTD To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1502345/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1501281] Re: Frequent freezes on 15.04 with kernel 3.19.0-29+
I have also gone several days without a freeze, Samsung with all Intel -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1501281 Title: Frequent freezes on 15.04 with kernel 3.19.0-29+ Status in linux package in Ubuntu: Confirmed Status in linux source package in Vivid: Incomplete Bug description: I am experiencing systematic freezes since my kernel was automatically upgraded to 3.19.0-29. Same problem happens if I use kernel 3.19.0-30. If I use kernel 3.19.0-28 it does not freeze any more. Behaviour is described with more details at http://askubuntu.com/questions/679212/frequent-freezes-on-15-04-with- kernel-3-19-0-29 and at http://askubuntu.com/questions/673767/frequent-freezes ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-28-generic 3.19.0-28.30 ProcVersionSignature: Ubuntu 3.19.0-28.30-generic 3.19.8-ckt5 Uname: Linux 3.19.0-28-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: andrea 3174 F pulseaudio /dev/snd/pcmC0D0p: andrea 3174 F...m pulseaudio /dev/snd/controlC0: andrea 3174 F pulseaudio CurrentDesktop: Unity Date: Wed Sep 30 12:45:03 2015 HibernationDevice: RESUME=UUID=7f029a53-8d17-4db1-b66f-d131578efe68 InstallationDate: Installed on 2010-04-15 (1993 days ago) InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release amd64 (20091027) IwConfig: eth2 no wireless extensions. lono wireless extensions. MachineType: ASUS All Series ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-28-generic root=UUID=5d76a02d-2ed2-484a-81da-3cf5ce0ab3fb ro crashkernel=384M-:128M RelatedPackageVersions: linux-restricted-modules-3.19.0-28-generic N/A linux-backports-modules-3.19.0-28-generic N/A linux-firmware 1.143.3 RfKill: SourcePackage: linux UpgradeStatus: Upgraded to vivid on 2015-04-30 (153 days ago) dmi.bios.date: 04/18/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0303 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: B85M-E dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0303:bd04/18/2013:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnB85M-E:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1501281/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1488719] Re: dmesg shows "[drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!"
I've just started getting this after updating to linux- image-3.19.0-30-generic from linux-image-3.19.0-28-generic. NUC 5i3RYH connected via the mini-hdmi port to a 720p tv. 100% repeatable for me using Kodi 15.1. If I play a video I get audio, but the video is all black. If I activate the on-screen display items they render fine, but the video content itself is missing. Audio is fine. Entering and exiting a video I get this each time: [ 29.275053] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 29.275763] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 29.316539] sound hdaudioC0D0: HDMI: ELD buf size is 0, force 128 [ 29.316579] sound hdaudioC0D0: HDMI: invalid ELD data byte 0 [ 29.348980] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! [ 29.363813] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)! Always the first six lines, sometimes more of the (SDE!) lines follow. Always one set when playback begins, and another when playback ends. Further to this, if I disable VAAPI acceleration in Kodi, the video playback works again, but the kernel messages still appear. Both the black-video and the messages are completely new in 3.19.0-30 - haven't seen either in earlier kernels. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1488719 Title: dmesg shows "[drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!" Status in Linux: Confirmed Status in linux package in Ubuntu: Confirmed Bug description: On a recent intel NUC using i915 graphics, I get the following errors in dmesg: [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)! There are two monitors connected to this box, one with mini- HDMI->HDMI, one with mini-DP->HDMI cable. Maybe related: https://bugs.freedesktop.org/show_bug.cgi?id=80896 ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-generic 3.19.0.26.25 ProcVersionSignature: Ubuntu 3.19.0-26.28-generic 3.19.8-ckt4 Uname: Linux 3.19.0-26-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.3 Architecture: amd64 Date: Wed Aug 26 10:07:31 2015 InstallationDate: Installed on 2015-08-01 (24 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-26-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 SourcePackage: linux UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1488719/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1447790] Re: bluetooth not working after upgrading to 15.04
BarryD9545, it will be immensely helpful if you filed a new report via a terminal: ubuntu-bug linux Please feel free to subscribe me to it. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1447790 Title: bluetooth not working after upgrading to 15.04 Status in linux package in Ubuntu: Expired Bug description: Similar issue was already reported as #1406014 After upgrading to 15.04 bluetooth is not working anymore: kernel: [9.421402] bluetooth hci0: Direct firmware load for brcm/BCM20702A0-0a5c-21e6.hcd failed with error -2 kernel: [9.421404] Bluetooth: hci0: BCM: patch brcm/BCM20702A0-0a5c-21e6.hcd not found ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-15-generic 3.19.0-15.15 ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dk 2597 F pulseaudio CurrentDesktop: Unity Date: Thu Apr 23 21:32:57 2015 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=bc6f6d34-2f04-49c4-b1e0-00c509b8c0fb InstallationDate: Installed on 2013-08-16 (615 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MachineType: LENOVO 3460CLG ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-15-generic.efi.signed root=UUID=895c87ae-1331-4119-acf2-4c54a7287e3b ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.19.0-15-generic N/A linux-backports-modules-3.19.0-15-generic N/A linux-firmware 1.143 SourcePackage: linux UpgradeStatus: Upgraded to vivid on 2015-04-23 (0 days ago) dmi.bios.date: 06/12/2014 dmi.bios.vendor: LENOVO dmi.bios.version: G6ETA7WW (2.67 ) dmi.board.asset.tag: Not Available dmi.board.name: 3460CLG dmi.board.vendor: LENOVO dmi.board.version: Win8 Pro DPK TPG dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG6ETA7WW(2.67):bd06/12/2014:svnLENOVO:pn3460CLG:pvrThinkPadX1Carbon:rvnLENOVO:rn3460CLG:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 3460CLG dmi.product.version: ThinkPad X1 Carbon dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1447790/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1497627] Re: Periodically video will freeze for no reason at all and no specific time between freezes.
chris pollock, to advise you don't have to attach logs about failed boots given you are using an upstream kernel, which is not supported here in Launchpad. Despite this, please continue to stress test 4.2.3 for a few more days. ** Attachment removed: "Syslog output when booting into kernel 4.3.0-rc4" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1497627/+attachment/4485257/+files/kernel430rc4.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1497627 Title: Periodically video will freeze for no reason at all and no specific time between freezes. Status in linux package in Ubuntu: Incomplete Bug description: What I expect to happen is the video to not freeze every so often. What happened is that the video froze. This has been going on for over a year. It doesn't matter if I have any applications open such as Evolution or Firefox. It could happen any time during the day when I'm working on the computer or during the night when it's the most idle. Once the video freezes the cursor can still be moved around the desktop however clicking on anything does not work. During this time all background process and cronjobs continue to run. --- ApportVersion: 2.14.1-0ubuntu3.13 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: chris 2095 F pulseaudio CurrentDesktop: GNOME DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=bb329dc0-0642-4b6a-876a-12c2f02fb7f6 InstallationDate: Installed on 2014-10-24 (332 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: Dell Inc. OptiPlex 780 Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-63-generic root=UUID=4254a7e9-429b-4f53-a08c-ae7ff839b98f ro drm.debug=0xe plymouth:debug ProcVersionSignature: Ubuntu 3.13.0-63.103-generic 3.13.11-ckt25 RelatedPackageVersions: linux-restricted-modules-3.13.0-63-generic N/A linux-backports-modules-3.13.0-63-generic N/A linux-firmware 1.127.15 RfKill: Tags: trusty Uname: Linux 3.13.0-63-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/06/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A15 dmi.board.name: 0C27VV dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.asset.tag: LE0006476 dmi.chassis.type: 6 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA15:bd08/06/2013:svnDellInc.:pnOptiPlex780:pvr:rvnDellInc.:rn0C27VV:rvrA01:cvnDellInc.:ct6:cvr: dmi.product.name: OptiPlex 780 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1497627/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1502555] Re: BUG: unable to handle kernel NULL pointer dereference at 0000000000000334
Stuart Bishop, as per http://support.hp.com/us-en/drivers/selfservice /HP-Pavilion-13-b200-Notebook-PC-series/7527795/model/7597682 an update to your computer's buggy and outdated BIOS is available (F.26). If you update to this following https://help.ubuntu.com/community/BIOSUpdate does it change anything? If it doesn't, could you please both specify what happened, and provide the output of the following terminal command: sudo dmidecode -s bios-version && sudo dmidecode -s bios-release-date For more on BIOS updates and linux, please see https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette . Please note your current BIOS is already in the Bug Description, so posting this on the old BIOS would not be helpful. As well, you don't have to create a new bug report. Once the BIOS is updated, if the problem is still reproducible, and the information above is provided, then please mark this report Status Confirmed. Otherwise, please mark this as Invalid. Thank you for your understanding. ** Tags added: bios-outdated-f.26 ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1502555 Title: BUG: unable to handle kernel NULL pointer dereference at 0334 Status in linux package in Ubuntu: Incomplete Bug description: Machine hung completely. This issue picked up by apport after power cycling. ProblemType: KernelOops DistroRelease: Ubuntu 15.10 Package: linux-image-4.2.0-12-generic 4.2.0-12.14 ProcVersionSignature: Ubuntu 4.2.0-12.14-generic 4.2.1 Uname: Linux 4.2.0-12-generic x86_64 NonfreeKernelModules: wl Annotation: Your system might become unstable now and might need to be restarted. ApportVersion: 2.19-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: stub 4672 F pulseaudio /dev/snd/controlC0: stub 4672 F pulseaudio Date: Sun Oct 4 15:47:49 2015 DuplicateSignature: BUG: unable to handle kernel NULL pointer dereference at location RIP: 0010:location location btrfs_sync_file+0xaa/0x340 [btrfs] Failure: oops HibernationDevice: RESUME=UUID=85d38fc2-ada5-4f5e-83ec-ca176c194dab InstallationDate: Installed on 2015-03-13 (204 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0a5c:216c Broadcom Corp. BCM43142A0 Bluetooth Device Bus 001 Device 003: ID 064e:c33c Suyin Corp. Bus 001 Device 002: ID 1bcf:0005 Sunplus Innovation Technology Inc. Optical Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Hewlett-Packard HP Pavilion 13 Notebook PC ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.2.0-12-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-3ubuntu8 SourcePackage: linux Title: BUG: unable to handle kernel NULL pointer dereference at 0334 UpgradeStatus: Upgraded to wily on 2015-09-29 (5 days ago) dmi.bios.date: 11/28/2014 dmi.bios.vendor: Insyde dmi.bios.version: F.24 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 2340 dmi.board.vendor: Hewlett-Packard dmi.board.version: 07.09 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.24:bd11/28/2014:svnHewlett-Packard:pnHPPavilion13NotebookPC:pvr097D12005F0400080:rvnHewlett-Packard:rn2340:rvr07.09:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion 13 Notebook PC dmi.product.version: 097D12005F0400080 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1502555/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1483494] Re: WIFI not working on Acer Aspire E5-573
Sandeep Singh, thanks for testing that. Would one release back give you a testable environment via http://releases.ubuntu.com/vivid/ ? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1483494 Title: WIFI not working on Acer Aspire E5-573 Status in linux package in Ubuntu: Incomplete Bug description: I have installed Linux Mint 17.2 Mate(64bit) on my new Acer Aspire E5-573. I am having a problem with wifi. Wireless connection is not working, only wired connection is working. I have a Qualcomm Atheros Device 0042 Wifi card. Here is a output. splinter@splinter ~ $ inxi -Fxz System:Host: splinter Kernel: 3.16.0-38-generic x86_64 (64 bit, gcc: 4.8.2) Desktop: N/A Distro: Linux Mint 17.2 Rafaela Machine: System: Acer product: Aspire E5-573 version: V3.72 Mobo: Acer model: ZORO_BH version: Type2 - A01 Board Version Bios: Insyde version: V1.11 date: 04/20/2015 CPU: Dual core Intel Core i3-4005U CPU (-HT-MCP-) cache: 3072 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 6784.64 Clock Speeds: 1: 1700.00 MHz 2: 1700.00 MHz 3: 1700.066 MHz 4: 1699.867 MHz Graphics: Card: Intel Haswell-ULT Integrated Graphics Controller bus-ID: 00:02.0 X.Org: 1.15.1 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz GLX Renderer: Mesa DRI Intel Haswell Mobile GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes Audio: Card-1: Intel Lynx Point-LP HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0 Card-2: Intel Haswell-ULT HD Audio Controller driver: snd_hda_intel bus-ID: 00:03.0 Sound: Advanced Linux Sound Architecture ver: k3.16.0-38-generic Network: Card-1: Qualcomm Atheros Device 0042 bus-ID: 03:00.0 IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169 ver: 2.3LK-NAPI port: 3000 bus-ID: 02:00.0 IF: eth0 state: down mac: Drives:HDD Total Size: 1032.1GB (0.5% used) 1: id: /dev/sda model: WDC_WD10JPVX size: 1000.2GB 2: id: /dev/sdb model: SD/MMC size: 31.9GB Partition: ID: / size: 230G used: 4.9G (3%) fs: ext4 ID: swap-1 size: 8.19GB used: 0.00GB (0%) fs: swap RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present Sensors: System Temperatures: cpu: 41.0C mobo: N/A Fan Speeds (in rpm): cpu: N/A Info: Processes: 189 Uptime: 19 min Memory: 336.0/3879.3MB Runlevel: 2 Gcc sys: 4.8.4 Client: Shell (bash 4.3.11) inxi: 1.9.17 splinter@splinter ~ $ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no Please help. --- ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: splinter 1891 F pulseaudio /dev/snd/controlC0: splinter 1891 F pulseaudio CurrentDesktop: MATE DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=0483444a-0d9a-4215-b36b-4aee75fd9ec0 InstallationDate: Installed on 2015-08-10 (0 days ago) InstallationMedia: Linux Mint 17.2 "Rafaela" - Release amd64 20150627 IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: Acer Aspire E5-573 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=ce5d744c-0341-42b5-af57-4da5721790d8 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10 RelatedPackageVersions: linux-restricted-modules-3.16.0-38-generic N/A linux-backports-modules-3.16.0-38-generic N/A linux-firmware 1.127.12 Tags: rafaela Uname: Linux 3.16.0-38-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 04/20/2015 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.11 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: ZORO_BH dmi.board.vendor: Acer dmi.board.version: Type2 - A01 Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.11:bd04/20/2015:svnAcer:pnAspireE5-573:pvrV3.72:rvnAcer:rnZORO_BH:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: Aspire E5-573 dmi.product.version: V3.72 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1483494/+subscriptions -- Mailing list: https://la
[Kernel-packages] [Bug 1502552] Re: touchpad not working
Chintana Prabhu, assigning oneself to a report indicates that one is
actively developing a patch for this, and will be releasing the code fix
upstream imminently. Is this issue something you can reproduce and will
be providing a patch within the next few days?
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1502552
Title:
touchpad not working
Status in linux package in Ubuntu:
Incomplete
Bug description:
Touchpad is not responding. External mouse is working.
The touchpad is not listed in xinput.
External mouse is listed twice in xinput as well as in 'cat
/proc/bus/input/devices' but touchpad driver isn't.
What I expected to see in /proc/bus/input/devices file:
I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio2/input0
S: Sysfs=/devices/platform/i8042/serio2/input/input8
U: Uniq=
H: Handlers=mouse2 event8
B: EV=b
B: KEY=420 0 7 0 0 0 0 0 0 0 0
B: ABS=1103
What I saw instead:
I: Bus=0003 Vendor=046d Product=c07e Version=0111
N: Name="Logitech Gaming Mouse G402"
P: Phys=usb-:00:14.0-1/input0
S: Sysfs=/devices/pci:00/:00:14.0/usb2/2-1/2-1:1.0/input/input15
U: Uniq=6D9036795757
H: Handlers=mouse0 event5
B: PROP=0
B: EV=17
B: KEY= 0 0 0 0
B: REL=143
B: MSC=10
I: Bus=0003 Vendor=046d Product=c07e Version=0111
N: Name="Logitech Gaming Mouse G402"
P: Phys=usb-:00:14.0-1/input1
S: Sysfs=/devices/pci:00/:00:14.0/usb2/2-1/2-1:1.1/input/input16
U: Uniq=6D9036795757
H: Handlers=sysrq kbd event6
B: PROP=0
B: EV=10001f
B: KEY=4837fff072ff32d bf56 1 30f908b17c007 ffe77bfad941dfff
febeffdfffef fffe
B: REL=40
B: ABS=1
B: MSC=10
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.8.0-44-generic 3.8.0-44.66~precise1
ProcVersionSignature: Ubuntu 3.8.0-44.66~precise1-generic 3.8.13.25
Uname: Linux 3.8.0-44-generic x86_64
NonfreeKernelModules: nvidia
AlsaVersion: Advanced Linux Sound Architecture Driver Version
k3.8.0-44-generic.
ApportVersion: 2.0.1-0ubuntu17.11
Architecture: amd64
ArecordDevices:
List of CAPTURE Hardware Devices
card 1: PCH [HDA Intel PCH], device 0: ALC255 Analog [ALC255 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1: sumit 2114 F pulseaudio
/dev/snd/controlC0: sumit 2114 F pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'MID'/'HDA Intel MID at 0xf7a14000 irq 60'
Mixer name : 'Intel Haswell HDMI'
Components : 'HDA:80862807,80860101,0010'
Controls : 7
Simple ctrls : 1
Card0.Amixer.values:
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Card1.Amixer.info:
Card hw:1 'PCH'/'HDA Intel PCH at 0xf7a1 irq 61'
Mixer name : 'Realtek ALC255'
Components : 'HDA:10ec0255,10280662,0012'
Controls : 18
Simple ctrls : 8
Date: Sun Oct 4 10:01:29 2015
HibernationDevice: RESUME=UUID=45998e30-d2b6-4037-96ff-63f405f9832d
InstallationMedia: Ubuntu 12.04.3 LTS "Precise Pangolin" - Release amd64
(20130820.1)
MachineType: Dell Inc. Vostro 3446
MarkForUpload: True
ProcEnviron:
LANGUAGE=en_IN:en
TERM=xterm
PATH=(custom, no user)
LANG=en_IN
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-44-generic
root=UUID=8def0356-8cf9-4e71-829f-03a59b5d259f ro quiet splash
RelatedPackageVersions:
linux-restricted-modules-3.8.0-44-generic N/A
linux-backports-modules-3.8.0-44-generic N/A
linux-firmware1.79.18
SourcePackage: linux-lts-raring
StagingDrivers: rts5139
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 07/13/2015
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A07
dmi.board.vendor: Dell Inc.
dmi.board.version: A07
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: Not Specified
dmi.modalias:
dmi:bvnDellInc.:bvrA07:bd07/13/2015:svnDellInc.:pnVostro3446:pvrNotSpecified:rvnDellInc.:rn:rvrA07:cvnDellInc.:ct8:cvrNotSpecified:
dmi.product.name: Vostro 3446
dmi.product.version: Not Specified
dmi.sys.vendor: Dell Inc.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1502552/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1473880] Re: Backport Intel 8260 Wifi/BT drivers
pdf, it will be immensely helpful if you filed a new report via a terminal: ubuntu-bug linux Please feel free to subscribe me to it. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1473880 Title: Backport Intel 8260 Wifi/BT drivers Status in linux package in Ubuntu: Expired Bug description: The drivers are now available in mainline 4.1 kernel and has been tested. Vivid currently doesn't support Intel 8260 Wifi/BT, and need to backport the drivers. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1473880/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1450396] Re: Gigabyte P35-DS3: does not stay suspended with default "ug" wake-on-lan setting
Jan Rathmann: >"- Is it really necessary to provide a resume trace?" Yes the trace is helpful with the latest mainline kernel (now 4.3-rc4). Just narrowing it down it WOL isn't necessarily enough for a developer to fix it quickly. However, the requested trace may provide which file and line of a buggy driver the offending code lies in. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1450396 Title: Gigabyte P35-DS3: does not stay suspended with default "ug" wake-on- lan setting Status in linux package in Ubuntu: Incomplete Status in systemd package in Ubuntu: Triaged Bug description: === Update: This bug was reported from BIOS version F13 of my board, in the meantime I upgraded to the most recent version F14, but this had no impact on the bug. === Hello, using Suspend-to-RAM on my system has stopped working reliably on Vivid when booting with Systemd. When I try to suspend my PC the following happens: - PC turns off - PC unwantedly wakes up (turns on) by itself again. This time span until it turns on again can reach from a second (almost immediately) until two or three minutes. - In a few cases (<25%), the PC stays suspended properly. A way to workaround this problem is to boot my PC with Upstart instead of Systemd, then this problem never happens (and has never happened in any of the previous Ubuntu versions since 2008). Thus it seems to be a bug somehow related to Systemd. Other steps I have tried to solve the problem (without any success): - Checking BIOS settings, all options are set that way that the PC should never wake up by any event other than pressing the power button. - Checking by running "cat /proc/acpi/wakeup | grep enabled" if any device could cause wake up events. This lists my USB controller, but deactivating it (with commands like "echo USB0 > /proc/acpi/wakeup") had no success on the problem. Also suspend while running Upstart works fine despite the USB controller listed as "enabled". In the system logs I could see no hint what causes the undesired wake- ups. Allthough there is one factor which seems to have a certain influence: If I close programs like Pidgin, Skype or Firefox that cause continuous network traffic, the chance is higher that my PC will stay suspened (while runinng Systemd). Kind regards, Jan ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: systemd 219-7ubuntu3 ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Thu Apr 30 11:24:46 2015 InstallationDate: Installed on 2015-04-16 (13 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Beta amd64 (20150415) MachineType: Gigabyte Technology Co., Ltd. P35-DS3 ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.19.0-15-generic root=/dev/mapper/internal--ssd-root ro rootflags=subvol=@ quiet splash SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/10/2008 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: F13 dmi.board.name: P35-DS3 dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF13:bd07/10/2008:svnGigabyteTechnologyCo.,Ltd.:pnP35-DS3:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnP35-DS3:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: P35-DS3 dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1450396/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1374759] Re: >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
I had the same problem with 1504 following the aided installation which created the swap as a logical partition. I them reinstall but manually created a primary partition for the swap and can no longer reproduce the error. In both cases the '/etc/fstab' where similar. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1374759 Title: >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old Status in initramfs-tools package in Ubuntu: Confirmed Status in linux package in Ubuntu: Triaged Status in os-prober package in Ubuntu: Confirmed Bug description: [ 556.734157] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 556.746268] JFS: nTxBlock = 8192, nTxLock = 65536 [ 556.763789] ntfs: driver 2.1.30 [Flags: R/O MODULE]. [ 556.792231] QNX4 filesystem 0.2.3 registered. [ 557.922469] EXT4-fs (sda4): unable to read superblock [ 557.925868] EXT4-fs (sda4): unable to read superblock [ 557.928967] EXT4-fs (sda4): unable to read superblock [ 557.931784] FAT-fs (sda4): bogus number of reserved sectors [ 557.931791] FAT-fs (sda4): Can't find a valid FAT filesystem [ 557.946740] XFS (sda4): Invalid superblock magic number [ 557.951904] FAT-fs (sda4): bogus number of reserved sectors [ 557.951911] FAT-fs (sda4): Can't find a valid FAT filesystem [ 557.959099] MINIX-fs: unable to read superblock [ 557.965712] attempt to access beyond end of device [ 557.965721] sda4: rw=16, want=3, limit=2 [ 557.965725] hfsplus: unable to find HFS+ superblock [ 557.968487] qnx4: no qnx4 filesystem (no root dir). [ 557.971203] You didn't specify the type of your ufs filesystem mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep |nextstep-cd|openstep ... >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 557.974459] hfs: can't find a HFS filesystem on dev sda4 [ 564.034208] EXT4-fs (sda4): unable to read superblock [ 564.040322] EXT4-fs (sda4): unable to read superblock [ 564.043485] EXT4-fs (sda4): unable to read superblock [ 564.047076] FAT-fs (sda4): bogus number of reserved sectors [ 564.047083] FAT-fs (sda4): Can't find a valid FAT filesystem [ 564.059578] XFS (sda4): Invalid superblock magic number [ 564.064473] FAT-fs (sda4): bogus number of reserved sectors [ 564.064489] FAT-fs (sda4): Can't find a valid FAT filesystem [ 564.072080] MINIX-fs: unable to read superblock [ 564.074564] attempt to access beyond end of device [ 564.074571] sda4: rw=16, want=3, limit=2 [ 564.074576] hfsplus: unable to find HFS+ superblock [ 564.076688] qnx4: no qnx4 filesystem (no root dir). [ 564.078847] You didn't specify the type of your ufs filesystem mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep |nextstep-cd|openstep ... >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 564.080902] hfs: can't find a HFS filesystem on dev sda4 [ 570.554296] EXT4-fs (sda4): unable to read superblock [ 570.557647] EXT4-fs (sda4): unable to read superblock [ 570.560516] EXT4-fs (sda4): unable to read superblock [ 570.563451] FAT-fs (sda4): bogus number of reserved sectors [ 570.563460] FAT-fs (sda4): Can't find a valid FAT filesystem [ 570.574953] XFS (sda4): Invalid superblock magic number [ 570.580796] FAT-fs (sda4): bogus number of reserved sectors [ 570.580806] FAT-fs (sda4): Can't find a valid FAT filesystem [ 570.588340] MINIX-fs: unable to read superblock [ 570.590983] attempt to access beyond end of device [ 570.590993] sda4: rw=16, want=3, limit=2 [ 570.590999] hfsplus: unable to find HFS+ superblock [ 570.593321] qnx4: no qnx4 filesystem (no root dir). [ 570.595556] You didn't specify the type of your ufs filesystem mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep |nextstep-cd|openstep ... >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 570.597775] hfs: can't find a HFS filesystem on dev sda4 [ 576.795014] EXT4-fs (sda4): unable to read superblock [ 576.797554] EXT4-fs (sda4): unable to read superblock [ 576.800063] EXT4-fs (sda4): unable to read superblock [ 576.802647] FAT-fs (sda4): bogus number of reserved sectors [ 576.802655] FAT-fs (sda4): Can't find a valid FAT filesystem [ 576.813305] XFS (sda4): Invalid superblock magic number [ 576.820257] FAT-fs (sda4): bogus number of reserved sectors [ 576.820276] FAT-fs (sda4): Can't find a valid FAT filesystem [ 576.830945] MINIX-fs: unable to read superblock [ 576.834108] attempt to access beyond end of device [ 576.834119] sda4: rw=16, want=3, limit=2 [ 576.834125] hfsplus: unable to find HFS+ superblock [ 576.837264] qnx4: no qnx4 filesystem (no root dir). [ 576.8
[Kernel-packages] [Bug 1389675] Re: Function keys will not adjust brightness
Chintana Prabhu, assigning oneself to a report indicates that one is actively developing a patch for this, and will be releasing the code fix upstream imminently. Is this issue something you can reproduce and will be providing a patch within the next few days? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1389675 Title: Function keys will not adjust brightness Status in linux package in Ubuntu: Confirmed Bug description: I have just installed Ubuntu 14.04, and I cannot make the function keys adjust the brightness. I have been trying to get a solution to the problem in this forum http://ubuntuforums.org/showthread.php?t=2250862&page=2&p=13159626#post13159626 . ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-39-generic 3.13.0-39.66 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: paul 1336 F pulseaudio /dev/snd/pcmC0D0p: paul 1336 F...m pulseaudio CurrentDesktop: Unity Date: Wed Nov 5 13:31:30 2014 HibernationDevice: RESUME=UUID=6357ccbf-2f39-4ca6-9cc1-65eb05bf30f6 InstallationDate: Installed on 2014-10-29 (6 days ago) InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.2) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b404 Chicony Electronics Co., Ltd Bus 001 Device 006: ID 1c4f:0003 SiGma Micro HID controller Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: ASUSTeK COMPUTER INC. X551MA ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic.efi.signed root=UUID=730dc0d2-8142-4bc0-a5ee-a2928da9bd65 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-39-generic N/A linux-backports-modules-3.13.0-39-generic N/A linux-firmware 1.127.7 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/27/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X551MA.510 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X551MA dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX551MA.510:bd06/27/2014:svnASUSTeKCOMPUTERINC.:pnX551MA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX551MA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X551MA dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1389675/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503127] Re: linux-lts-vivid: 3.19.0-31.35~14.04.1 -proposed tracker
** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Fix Released ** Changed in: kernel-sru-workflow/prepare-package-meta Assignee: Canonical Kernel Team (canonical-kernel-team) => Luis Henriques (henrix) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-vivid in Ubuntu. https://bugs.launchpad.net/bugs/1503127 Title: linux-lts-vivid: 3.19.0-31.35~14.04.1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: New Status in Kernel SRU Workflow certification-testing series: New Status in Kernel SRU Workflow prepare-package series: New Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: New Status in Kernel SRU Workflow promote-to-proposed series: New Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: New Status in Kernel SRU Workflow security-signoff series: New Status in Kernel SRU Workflow verification-testing series: New Status in linux-lts-vivid package in Ubuntu: Invalid Status in linux-lts-vivid source package in Trusty: New Bug description: This bug is for tracking the 3.19.0-31.35~14.04.1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 06. October 2015 05:00 UTC kernel-stable-phase:Prepare kernel-stable-phase-changed:Tuesday, 06. October 2015 05:00 UTC kernel-stable-master-bug:1503005 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1503127/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1501765] Re: [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.wrpll (expected 0xb012040f, found 0x00000000)
I now tested with 4.3.0-040300rc4-generic The error is still there, but now only appears once. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1501765 Title: [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.wrpll (expected 0xb012040f, found 0x) Status in linux package in Ubuntu: Incomplete Bug description: No actual trouble, (except having to restart plasmashell manually after each login, but that might not be related). Logs are full of warnings: Oct 01 14:52:39 pc-alvin kernel: [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.wrpll (expected 0xb012040f, found 0x) Oct 01 14:52:39 pc-alvin kernel: [ cut here ] Oct 01 14:52:39 pc-alvin kernel: WARNING: CPU: 3 PID: 1033 at /build/linux-X28llO/linux-4.2.0/drivers/gpu/drm/i915/intel_display.c:12326 check_crtc_state+0x2c5/0x440 [i915]() Oct 01 14:52:39 pc-alvin kernel: pipe state doesn't match! Oct 01 14:52:39 pc-alvin kernel: Modules linked in: rfcomm bnep nls_iso8859_1 xfs libcrc32c intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm snd_hda_codec_hdmi snd_h Oct 01 14:52:39 pc-alvin kernel: nf_conntrack_ftp nf_conntrack iptable_filter parport_pc ip_tables ppdev x_tables lp parport autofs4 drbg ansi_cprng algif_skcipher af_alg uas usb_storage hid_gener Oct 01 14:52:39 pc-alvin kernel: CPU: 3 PID: 1033 Comm: Xorg Tainted: G W 4.2.0-12-generic #14-Ubuntu Oct 01 14:52:39 pc-alvin kernel: Hardware name: FUJITSU D3222-B1/D3222-B1, BIOS V4.6.5.4 R1.37.0 for D3222-B1x 08/06/2015 Oct 01 14:52:39 pc-alvin kernel: c027eab0 8804087737e8 817b0cd5 Oct 01 14:52:39 pc-alvin kernel: 880408773838 880408773828 81076536 880408773858 Oct 01 14:52:39 pc-alvin kernel: 8804087738c0 88040ba1e800 0001 88040ba1eb50 Oct 01 14:52:39 pc-alvin kernel: Call Trace: Oct 01 14:52:39 pc-alvin kernel: [] dump_stack+0x45/0x57 Oct 01 14:52:39 pc-alvin kernel: [] warn_slowpath_common+0x86/0xc0 Oct 01 14:52:39 pc-alvin kernel: [] warn_slowpath_fmt+0x46/0x50 Oct 01 14:52:39 pc-alvin kernel: [] ? intel_pipe_config_compare+0xa67/0xc60 [i915] Oct 01 14:52:39 pc-alvin kernel: [] check_crtc_state+0x2c5/0x440 [i915] Oct 01 14:52:39 pc-alvin kernel: [] intel_modeset_check_state+0x20e/0x6b0 [i915] Oct 01 14:52:39 pc-alvin kernel: [] intel_crtc_set_config+0x4c7/0x580 [i915] Oct 01 14:52:39 pc-alvin kernel: [] ? drm_mode_create+0x25/0x60 [drm] Oct 01 14:52:39 pc-alvin kernel: [] drm_mode_set_config_internal+0x66/0x100 [drm] Oct 01 14:52:39 pc-alvin kernel: [] drm_mode_setcrtc+0x3a8/0x4c0 [drm] Oct 01 14:52:39 pc-alvin kernel: [] drm_ioctl+0x125/0x610 [drm] Oct 01 14:52:39 pc-alvin kernel: [] ? drm_mode_setplane+0x1b0/0x1b0 [drm] Oct 01 14:52:39 pc-alvin kernel: [] do_vfs_ioctl+0x285/0x470 Oct 01 14:52:39 pc-alvin kernel: [] ? recalc_sigpending+0x1f/0x60 Oct 01 14:52:39 pc-alvin kernel: [] ? __set_task_blocked+0x32/0x70 Oct 01 14:52:39 pc-alvin kernel: [] SyS_ioctl+0x79/0x90 Oct 01 14:52:39 pc-alvin kernel: [] entry_SYSCALL_64_fastpath+0x16/0x75 Oct 01 14:52:39 pc-alvin kernel: ---[ end trace 9b3399ab2e633e05 ]--- ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: linux-image-4.2.0-12-generic 4.2.0-12.14 ProcVersionSignature: Ubuntu 4.2.0-12.14-generic 4.2.1 Uname: Linux 4.2.0-12-generic x86_64 ApportVersion: 2.19-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: alvin 1495 F pulseaudio /dev/snd/controlC1: alvin 1495 F pulseaudio CurrentDesktop: KDE Date: Thu Oct 1 15:28:34 2015 HibernationDevice: RESUME=UUID=d6485f6e-2acf-4d0e-b368-65c0bb79b539 InstallationDate: Installed on 2015-10-01 (0 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150924) IwConfig: enp0s25 no wireless extensions. lono wireless extensions. MachineType: FUJITSU D3222-B1 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.2.0-12-generic.efi.signed root=/dev/mapper/kubuntu-root ro noprompt quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.2.0-12-generic N/A linux-backports-modules-4.2.0-12-generic N/A linux-firmware1.148 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/06/2015 dmi.bios.vendor: FUJITSU // American Megatrends Inc. dmi.bios.version: V4.6.5.4 R1.37.0 for D3222-B1x dmi.board.name: D3222-B1 dmi.board.vendor: FUJITSU dmi.board.version: S26361
[Kernel-packages] [Bug 607061] Re: screen brightness unchangable
There might be some common problem with Bug #562005 (https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics- drivers/+bug/562005). -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/607061 Title: screen brightness unchangable Status in xf86-video-intel: Invalid Status in linux package in Ubuntu: Incomplete Bug description: Binary package hint: xorg Hello, I am using a Gateway NV5927U laptop and the screen brightness is unchangeable via the keyboard controls. The brightness is stuck at 100% and changing values inside of /proc/acpi/video/GFX0 have no effect on the brightness. Please let me know what else you may need. If the brightness is changed inside of Microsoft Windows it will visually stay dim until GDM starts, at this point the screen raises to full brightness and is locked at that state. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: xorg 1:7.5+5ubuntu1 ProcVersionSignature: Ubuntu 2.6.32-23.37-generic 2.6.32.15+drm33.5 Uname: Linux 2.6.32-23-generic i686 Architecture: i386 Date: Mon Jul 19 00:19:36 2010 InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Alpha i386 (20100213) Lsusb: Bus 002 Device 003: ID 04f2:b044 Chicony Electronics Co., Ltd Bus 002 Device 002: ID 8087:0020 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Gateway NV59 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-23-generic root=UUID=2e6f02f8-a269-473e-bdab-905fc6eb70a3 ro processor.max_cstate=2 vga=0x317 quiet splash ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash SourcePackage: xorg dmi.bios.date: 11/26/2009 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: V1.09 dmi.board.name: NV59 dmi.board.vendor: Gateway dmi.board.version: Rev dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Gateway dmi.chassis.version: Rev dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvrV1.09:bd11/26/2009:svnGateway:pnNV59:pvrRev:rvnGateway:rnNV59:rvrRev:cvnGateway:ct10:cvrRev: dmi.product.name: NV59 dmi.product.version: Rev dmi.sys.vendor: Gateway glxinfo: Error: [Errno 2] No such file or directory system: distro: Ubuntu codename: lucid architecture: i686 kernel: 2.6.32-23-generic To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/607061/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503239] Re: linux-lts-utopic: 3.16.0-51.68~14.04.1 -proposed tracker
** Changed in: kernel-sru-workflow/prepare-package-meta Status: New => Fix Released ** Changed in: kernel-sru-workflow/prepare-package-meta Assignee: Canonical Kernel Team (canonical-kernel-team) => Luis Henriques (henrix) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-utopic in Ubuntu. https://bugs.launchpad.net/bugs/1503239 Title: linux-lts-utopic: 3.16.0-51.68~14.04.1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: New Status in Kernel SRU Workflow certification-testing series: New Status in Kernel SRU Workflow prepare-package series: New Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: New Status in Kernel SRU Workflow promote-to-proposed series: New Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: New Status in Kernel SRU Workflow security-signoff series: New Status in Kernel SRU Workflow verification-testing series: New Status in linux-lts-utopic package in Ubuntu: Invalid Status in linux-lts-utopic source package in Trusty: New Bug description: This bug is for tracking the 3.16.0-51.68~14.04.1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 06. October 2015 11:00 UTC kernel-stable-phase:Prepare kernel-stable-phase-changed:Tuesday, 06. October 2015 11:00 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1503239/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503118] Re: linux-lts-trusty: 3.13.0-66.107~precise1 -proposed tracker
** Changed in: kernel-sru-workflow/prepare-package-signed Status: New => Fix Released ** Changed in: kernel-sru-workflow/prepare-package-signed Assignee: Canonical Kernel Team (canonical-kernel-team) => Luis Henriques (henrix) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1503118 Title: linux-lts-trusty: 3.13.0-66.107~precise1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: New Status in Kernel SRU Workflow certification-testing series: New Status in Kernel SRU Workflow prepare-package series: New Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: New Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: New Status in Kernel SRU Workflow security-signoff series: New Status in Kernel SRU Workflow verification-testing series: New Status in linux-lts-trusty package in Ubuntu: Invalid Status in linux-lts-trusty source package in Precise: New Bug description: This bug is for tracking the 3.13.0-66.107~precise1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 06. October 2015 04:02 UTC kernel-stable-phase:Prepare kernel-stable-phase-changed:Tuesday, 06. October 2015 04:02 UTC kernel-stable-master-bug:1503021 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1503118/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503274] [NEW] CMCI Storm
Public bug reported: I am getting a lot of CMCI Storm detected, and the System freezes... ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-65-generic 3.13.0-65.105 ProcVersionSignature: Ubuntu 3.13.0-65.105-generic 3.13.11-ckt26 Uname: Linux 3.13.0-65-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.15 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: wihan 2954 F pulseaudio /dev/snd/controlC0: wihan 2954 F pulseaudio CurrentDesktop: Unity Date: Tue Oct 6 15:02:16 2015 HibernationDevice: RESUME=UUID=d140a701-19e2-4613-9333-1b4d36996490 IwConfig: eth3 no wireless extensions. lono wireless extensions. MachineType: Dell Inc. Precision WorkStation T3500 ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-65-generic root=UUID=4ff1edf7-9302-4be4-9105-be3195981fb1 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-65-generic N/A linux-backports-modules-3.13.0-65-generic N/A linux-firmware 1.127.15 RfKill: SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-10-09 (361 days ago) WpaSupplicantLog: dmi.bios.date: 05/28/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 09KPNV dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 7 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd05/28/2013:svnDellInc.:pnPrecisionWorkStationT3500:pvr:rvnDellInc.:rn09KPNV:rvrA01:cvnDellInc.:ct7:cvr: dmi.product.name: Precision WorkStation T3500 dmi.sys.vendor: Dell Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1503274 Title: CMCI Storm Status in linux package in Ubuntu: New Bug description: I am getting a lot of CMCI Storm detected, and the System freezes... ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-65-generic 3.13.0-65.105 ProcVersionSignature: Ubuntu 3.13.0-65.105-generic 3.13.11-ckt26 Uname: Linux 3.13.0-65-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.15 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: wihan 2954 F pulseaudio /dev/snd/controlC0: wihan 2954 F pulseaudio CurrentDesktop: Unity Date: Tue Oct 6 15:02:16 2015 HibernationDevice: RESUME=UUID=d140a701-19e2-4613-9333-1b4d36996490 IwConfig: eth3 no wireless extensions. lono wireless extensions. MachineType: Dell Inc. Precision WorkStation T3500 ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-65-generic root=UUID=4ff1edf7-9302-4be4-9105-be3195981fb1 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-65-generic N/A linux-backports-modules-3.13.0-65-generic N/A linux-firmware 1.127.15 RfKill: SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-10-09 (361 days ago) WpaSupplicantLog: dmi.bios.date: 05/28/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 09KPNV dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 7 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd05/28/2013:svnDellInc.:pnPrecisionWorkStationT3500:pvr:rvnDellInc.:rn09KPNV:rvrA01:cvnDellInc.:ct7:cvr: dmi.product.name: Precision WorkStation T3500 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1503274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1253155] Re: Failure to validate module signature at boot time
Hi Folks, I have the same behavior: 3.19.0-30-generic #33-Ubuntu SMP Mon Sep 21 20:58:04 UTC 2015 No LSB modules are available. Distributor ID: Ubuntu Description:Ubuntu 15.04 Release:15.04 Codename: vivid [mar. oct. 6 00:06:18 2015] Request for unknown module key 'Magrathea: Glacier signing key: 08411dd668c266d59a96c625b3012497b2351542' err -11 [mar. oct. 6 00:06:18 2015] JFS: nTxBlock = 8192, nTxLock = 65536 [mar. oct. 6 00:06:18 2015] Request for unknown module key 'Magrathea: Glacier signing key: 08411dd668c266d59a96c625b3012497b2351542' err -11 [mar. oct. 6 00:06:18 2015] Request for unknown module key 'Magrathea: Glacier signing key: 08411dd668c266d59a96c625b3012497b2351542' err -11 [mar. oct. 6 00:06:18 2015] ntfs: driver 2.1.31 [Flags: R/O MODULE]. [mar. oct. 6 00:06:18 2015] Request for unknown module key 'Magrathea: Glacier signing key: 08411dd668c266d59a96c625b3012497b2351542' err -11 [mar. oct. 6 00:06:18 2015] Request for unknown module key 'Magrathea: Glacier signing key: 08411dd668c266d59a96c625b3012497b2351542' err -11 [mar. oct. 6 00:06:18 2015] Request for unknown module key 'Magrathea: Glacier signing key: 08411dd668c266d59a96c625b3012497b2351542' err -11 [mar. oct. 6 00:06:18 2015] Request for unknown module key 'Magrathea: Glacier signing key: 08411dd668c266d59a96c625b3012497b2351542' err -11 [mar. oct. 6 00:06:18 2015] QNX4 filesystem 0.2.3 registered. [mar. oct. 6 00:06:18 2015] Request for unknown module key 'Magrathea: Glacier signing key: 08411dd668c266d59a96c625b3012497b2351542' err -11 [mar. oct. 6 00:06:18 2015] Request for unknown module key 'Magrathea: Glacier signing key: 08411dd668c266d59a96c625b3012497b2351542' err -11 [mar. oct. 6 00:06:18 2015] raid6: sse2x15577 MB/s [mar. oct. 6 00:06:18 2015] raid6: sse2x25407 MB/s [mar. oct. 6 00:06:18 2015] raid6: sse2x46000 MB/s [mar. oct. 6 00:06:18 2015] raid6: using algorithm sse2x4 (6000 MB/s) [mar. oct. 6 00:06:18 2015] raid6: using ssse3x2 recovery algorithm [mar. oct. 6 00:06:18 2015] Request for unknown module key 'Magrathea: Glacier signing key: 08411dd668c266d59a96c625b3012497b2351542' err -11 [mar. oct. 6 00:06:18 2015] xor: measuring software checksum speed [mar. oct. 6 00:06:18 2015]prefetch64-sse: 7562.000 MB/sec [mar. oct. 6 00:06:18 2015]generic_sse: 6699.000 MB/sec [mar. oct. 6 00:06:18 2015] xor: using function: prefetch64-sse (7562.000 MB/sec) [mar. oct. 6 00:06:18 2015] Request for unknown module key 'Magrathea: Glacier signing key: 08411dd668c266d59a96c625b3012497b2351542' err -11 ** Tags added: vivid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1253155 Title: Failure to validate module signature at boot time Status in linux package in Ubuntu: Fix Released Status in linux-lts-raring package in Ubuntu: Invalid Status in linux source package in Precise: Invalid Status in linux-lts-raring source package in Precise: Fix Released Status in linux source package in Quantal: Invalid Status in linux-lts-raring source package in Quantal: Invalid Status in linux source package in Saucy: Fix Released Status in linux-lts-raring source package in Saucy: Invalid Status in linux source package in Trusty: Fix Released Status in linux-lts-raring source package in Trusty: Invalid Bug description: When booting under secureboot and using a signed kernel, it's expected that all modules shipped alongside the kernel should validate and load successfully without tainting the kernel. Unfortunately it doesn't seem to always be the case. Looking through my kernel logs, I see: Nov 15 10:35:24 castiana kernel: [1.635132] video: module verification failed: signature and/or required key missing - tainting kernel or Nov 12 12:58:48 castiana kernel: [213981.753326] Request for unknown module key 'Magrathea: Glacier signing key: f440a253eb498df923d438caa09b3b5d99308405' err -11 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.12.0-2-generic 3.12.0-2.7 ProcVersionSignature: Ubuntu 3.12.0-2.7-generic 3.12.0 Uname: Linux 3.12.0-2-generic x86_64 ApportVersion: 2.12.7-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: stgraber 2721 F pulseaudio /dev/snd/controlC0: stgraber 2721 F pulseaudio /dev/snd/pcmC0D0c: stgraber 2721 F...m pulseaudio /dev/snd/pcmC0D0p: stgraber 2721 F...m pulseaudio CurrentDesktop: Unity Date: Wed Nov 20 11:59:57 2013 InstallationDate: Installed on 2013-04-21 (213 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130420) MachineType: LENOVO 2306CT0 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.12.0-2-generic.efi.signed root=UUID=14de4e20-b139-488e-863f-ec710f776851 ro quiet splash "acpi_osi=!Windows 2
[Kernel-packages] [Bug 1482343] Re: Trigger a checkstop on unrecoverable MCE/HMI errors to inform BMC/OCC about the error.
Hi Tim, We would like to have this targeted for 14.04 SRu also. Is it possible? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1482343 Title: Trigger a checkstop on unrecoverable MCE/HMI errors to inform BMC/OCC about the error. Status in linux package in Ubuntu: Fix Released Status in linux source package in Wily: Fix Released Bug description: The current implementation of Machine Check handler and HMI handler in Linux, goes down kernel panic path for unrecoverable errors. On FSP based system FSP also gets notified about these errors which then forwards it to PRD (that runs on FSP) for error analysis and gard record creation. On OpenPower (BMC based system e.g. Habanero from TYAN) where PRD runs in Linux host, it never gets a chance to do error analysis at the time of Linux crash and no gard record is created for such errors. Since the faulty component never gets de-configured, the system is vulnerable to get hit by same HW error again. To fix this issue, a new OPAL call 'opal_cec_reboot2()' has been introduced to trigger a checkstop on BMC based system to inform BMC/OCC about this error, so that BMC can collect relevant data for error analysis and decide what component to de-configure before rebooting. Linux kernel should invoke this opal call for unrecoverable MCE and HMI instead before calling kernel panic so that OCC is informed about the error. The kernel changes has already been posted to upstream and are listed below: https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-May/128341.html https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-May/128342.html https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-August/132045.html https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-August/132114.html Above patches needs to be included in ubuntu 14.04.3+ We will update this bug with commit ids, once the above patches are accepted upstream. Contact Information = mahesh.salgaon...@in.ibm.com ---uname output--- Linux rcx2d403 3.19.0-26-generic #27 SMP Tue Aug 4 01:38:15 CDT 2015 ppc64le ppc64le ppc64le GNU/Linux ---Additional Hardware Info--- Habanero pass2 system Machine Type = OpenPower, Habanero ---System Hang--- If system is hung, it can be recovered by sending ipmi power off/on command. $ ipmitool -H -I lanplus -U -P power off $ ipmitool -H -I lanplus -U -P power on To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1482343/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503274] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1503274 Title: CMCI Storm Status in linux package in Ubuntu: Confirmed Bug description: I am getting a lot of CMCI Storm detected, and the System freezes... ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-65-generic 3.13.0-65.105 ProcVersionSignature: Ubuntu 3.13.0-65.105-generic 3.13.11-ckt26 Uname: Linux 3.13.0-65-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.15 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: wihan 2954 F pulseaudio /dev/snd/controlC0: wihan 2954 F pulseaudio CurrentDesktop: Unity Date: Tue Oct 6 15:02:16 2015 HibernationDevice: RESUME=UUID=d140a701-19e2-4613-9333-1b4d36996490 IwConfig: eth3 no wireless extensions. lono wireless extensions. MachineType: Dell Inc. Precision WorkStation T3500 ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-65-generic root=UUID=4ff1edf7-9302-4be4-9105-be3195981fb1 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-65-generic N/A linux-backports-modules-3.13.0-65-generic N/A linux-firmware 1.127.15 RfKill: SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-10-09 (361 days ago) WpaSupplicantLog: dmi.bios.date: 05/28/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 09KPNV dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 7 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd05/28/2013:svnDellInc.:pnPrecisionWorkStationT3500:pvr:rvnDellInc.:rn09KPNV:rvrA01:cvnDellInc.:ct7:cvr: dmi.product.name: Precision WorkStation T3500 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1503274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1502792] Re: [Dell Inspiron 5552][8086:22b1] X didn't use hardware acceleration
Thats to be expected, the graphics stacks are only upgraded on the installation images and this hardware was not supported in 14.04.1 ** Changed in: hwe-next Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1502792 Title: [Dell Inspiron 5552][8086:22b1] X didn't use hardware acceleration Status in HWE Next: Invalid Status in linux package in Ubuntu: Fix Released Bug description: it's a fresh installed 14.04.1(kernel 3.13) with system software upgraded to 14.04.3. unity does not fully supported because there is no 3d acceleration with this intel graphic. as in contrast, 14.04.3 with 3.19 kernel the graphic works just fine. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xserver-xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.13.0-65.105-generic 3.13.11-ckt26 Uname: Linux 3.13.0-65-generic x86_64 .tmp.unity.support.test.1: ApportVersion: 2.14.1-0ubuntu3.15 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Mon Oct 5 15:58:31 2015 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: fwts-efi-runtime-dkms, 15.09.00, 3.13.0-65-generic, x86_64: installed tp-smapi, 0.41, 3.13.0-65-generic, x86_64: installed ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation Device [8086:22b1] (rev 21) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:06d8] InstallationDate: Installed on 2015-10-02 (3 days ago) InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.2) MachineType: Dell Inc. Inspiron 5552 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-65-generic.efi.signed root=UUID=4bad80b9-c053-4817-825c-3dba80ae58d1 ro quiet splash vt.handoff=7 Renderer: Software SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/10/2015 dmi.bios.vendor: Dell Inc. dmi.bios.version: 0.4.8 dmi.board.name: Inspiron 5552 dmi.board.vendor: Dell Inc. dmi.board.version: 000 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.4.8 dmi.modalias: dmi:bvnDellInc.:bvr0.4.8:bd06/10/2015:svnDellInc.:pnInspiron5552:pvr0.4.8:rvnDellInc.:rnInspiron5552:rvr000:cvnDellInc.:ct8:cvr0.4.8: dmi.product.name: Inspiron 5552 dmi.product.version: 0.4.8 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.6 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Mon Oct 5 15:50:31 2015 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.15.1-0ubuntu2.7 To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1502792/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
Re: [Kernel-packages] [Bug 1436940] Re: Atheros wifi 168c:0041(QCA6174) is not supported
Any tried this for centos 7? Sent from my android device. -Original Message- From: Balaji To: marc.matt...@mchsi.com Sent: Mon, 05 Oct 2015 10:12 PM Subject: [Bug 1436940] Re: Atheros wifi 168c:0041(QCA6174) is not supported Thanks Jeremy, I just tried your backports version .. it is working fine without any hitches .. $ $ uname -a Linux balaji-exp 3.19.0-30-generic #34~14.04.1-Ubuntu SMP Fri Oct 2 22:09:39 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux $ sudo lshw -C network *-network description: Ethernet interface product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@:02:00.0 logical name: eth0 version: 15 serial: f0:76:1c:b9:0c:69 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168h-2_0.0.2 02/26/15 latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:48 ioport:4000(size=256) memory:d1304000-d1304fff memory:d130-d1303fff *-network description: Wireless interface product: Qualcomm Atheros vendor: Qualcomm Atheros physical id: 0 bus info: pci@:03:00.0 logical name: wlan0 version: 20 serial: ac:e0:10:2d:af:af width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath10k_pci driverversion=3.19.0-30-generic firmware=atheros-12.0.0.102-fw ip=192.168.1.37 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:54 memory:d100-d11f $ $ sudo modinfo ath10k_pci filename: /lib/modules/3.19.0-30-generic/updates/dkms/ath10k_pci.ko firmware: ath10k/QCA6174/hw3.0/board.bin firmware: ath10k/QCA6174/hw3.0/firmware-5.bin firmware: ath10k/QCA6174/hw3.0/firmware-4.bin firmware: ath10k/QCA6174/hw2.1/board.bin firmware: ath10k/QCA6174/hw2.1/firmware-5.bin firmware: ath10k/QCA6174/hw2.1/firmware-4.bin firmware: ath10k/QCA988X/hw2.0/board.bin firmware: ath10k/QCA988X/hw2.0/firmware-5.bin firmware: ath10k/QCA988X/hw2.0/firmware-4.bin firmware: ath10k/QCA988X/hw2.0/firmware-3.bin firmware: ath10k/QCA988X/hw2.0/firmware-2.bin firmware: ath10k/QCA988X/hw2.0/firmware.bin license:Dual BSD/GPL description:Driver support for Atheros QCA988X PCIe devices author: Qualcomm Atheros version:backported from () using backports srcversion: 2C3D5FA5797C89E8231F86B alias: pci:v168Cd0040sv*sd*bc*sc*i* alias: pci:v168Cd003Esv*sd*bc*sc*i* alias: pci:v168Cd0041sv*sd*bc*sc*i* alias: pci:v168Cd003Csv*sd*bc*sc*i* depends:ath10k_core,compat vermagic: 3.19.0-30-generic SMP mod_unload modversions parm: irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint) parm: reset_mode:0: auto, 1: warm only (default: 0) (uint) $ - Balaji -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1436940 Title: Atheros wifi 168c:0041(QCA6174) is not supported Status in linux package in Ubuntu: Confirmed Status in linux source package in Vivid: Confirmed Status in linux source package in Wily: Confirmed Bug description: The atheros wireless device (168c:0041) isn't supported by the ath10k_pci kernel driver. Found in several laptop models: Lenovo Z70 Lenovo G50-45 Lenovo G50-80 Lenovo Edge 15 Lenovo Yoga 3 11 Lenovo Flex 3-1470 Samsung ATIV Book 9 NP930X2K ProblemType: BugDistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-9-generic 3.19.0-9.9 ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1 Uname: Linux 3.19.0-9-generic x86_64 ApportVersion: 2.16.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: nicholas 1695 F pulseaudio /dev/snd/controlC1: nicholas 1695 F pulseaudio CurrentDesktop: Unity Date: Thu Mar 26 09:47:16 2015 HibernationDevice: RESUME=UUID=5b068cd8-e60a-49b9-a88e-1581bb6b3dc1 InstallationDate: Installed on 2015-03-25 (1 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1) IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e300 Atheros Communications, Inc. Bus 001 Device 003: ID 5986:0652 Acer, Inc Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor
[Kernel-packages] [Bug 1483101] Re: Broadcom bluetooth modules sometimes fail to initialize
I'm affected too. My module is 0a5c:216c Thanks in advance. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1483101 Title: Broadcom bluetooth modules sometimes fail to initialize Status in HWE Next: In Progress Status in linux package in Ubuntu: In Progress Bug description: This message can be found in dmesg: [ 15.080247] Bluetooth: hci0 command 0x1001 tx timeout Currently known affected modules: * 0a5c:216a * 0a5c:6410 * 0a5c:6412 To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1483101/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1481347] Comment bridged from LTC Bugzilla
--- Comment From bren...@br.ibm.com 2015-10-06 14:04 EDT--- Madhavan, Were the patches accepted upstream? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1481347 Title: Power8 Nest PMU Instrumentation support Status in linux package in Ubuntu: Triaged Bug description: This is a bug for Canonical awareness that we want to have the following patches included in 15.10. They are still under development/review: https://patchwork.ozlabs.org/patch/482968/ https://patchwork.ozlabs.org/patch/482969/ https://patchwork.ozlabs.org/patch/482970/ https://patchwork.ozlabs.org/patch/482971/ https://patchwork.ozlabs.org/patch/482972/ https://patchwork.ozlabs.org/patch/482973/ https://patchwork.ozlabs.org/patch/482974/ Patches under review. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1481347/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1477466] Re: Low performance when using vlan over VxLan
@gavin has cherry-picked some commits and we would like you to test and provide feedback: These are Gavin's comments: @tinoco, I've backported the 2 patches you mentioned in the bug description. Could you help to verify if the backported kernel can speed up the performance? The kernel source is in: http://kernel.ubuntu.com/git/gavinguo/ubuntu-trusty-amd64.git/log/?h=sf00088101 The kernel package: http://kernel.ubuntu.com/~gavinguo/sf00088101/ - The first commit as following can be cleanly cherry-picked: commit 9b174d88c257150562b0101fcc6cb6c3cb74275c Author: Jesse Gross Date: Tue Dec 30 19:10:15 2014 -0800 net: Add Transparent Ethernet Bridging GRO support. - The second has some conflict and I tried to fix that: commit 66e5133f19e901a044fa5eaeeb6ecff4545839e5 Author: Toshiaki Makita Date: Mon Jun 1 21:55:06 2015 +0900 vlan: Add GRO support for non hardware accelerated vlan - Despite I fixed the conflict, the kernel cannot be built and still need the commit: commit 0e82d0187ce8327aca20ec9e4e32ee10fbd229cb Author: David S. Miller Date: Mon Jun 1 14:56:09 2015 -0700 net: Add priority to packet_offload objects. Because in the Vivid kernel, there is no priority member in the packet_offload struct. Please tell me if you find anything wrong, sorry for not familiar with the network subsystem. Thank you Rafael Tinoco ** Changed in: linux (Ubuntu) Status: Triaged => In Progress ** Changed in: linux (Ubuntu Vivid) Status: Triaged => In Progress -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1477466 Title: Low performance when using vlan over VxLan Status in linux package in Ubuntu: In Progress Status in linux source package in Vivid: In Progress Bug description: We see a performance issue when running traffic over vlan interface that created over VxLAN interface. We reach 24 Gbps over the VxLan interface while we reach only 4 Gbps over the VLAN interface. Turned out that GRO isn't supported for VLAN over VxLAN. The following upstream commits fix this issue. commit 66e5133f19e901a044fa5eaeeb6ecff4545839e5 Author: Toshiaki Makita Date: Mon Jun 1 21:55:06 2015 +0900 vlan: Add GRO support for non hardware accelerated vlan Currently packets with non-hardware-accelerated vlan cannot be handled by GRO. This causes low performance for 802.1ad and stacked vlan, as their vlan tags are currently not stripped by hardware. This patch adds GRO support for non-hardware-accelerated vlan and improves receive performance of them. commit 9b174d88c257150562b0101fcc6cb6c3cb74275c Author: Jesse Gross Date: Tue Dec 30 19:10:15 2014 -0800 net: Add Transparent Ethernet Bridging GRO support. Currently the only tunnel protocol that supports GRO with encapsulated Ethernet is VXLAN. This pulls out the Ethernet code into a proper layer so that it can be used by other tunnel protocols such as GRE and Geneve. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1477466/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1431560] Re: kernel BUG at /build/buildd/linux-3.19.0/fs/buffer.c:3006!
One time event and no evidence of it happening again on 4.2 kernel. ** Changed in: linux (Ubuntu) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1431560 Title: kernel BUG at /build/buildd/linux-3.19.0/fs/buffer.c:3006! Status in linux package in Ubuntu: Invalid Bug description: Not sure what caused this exactly. Was doing a package update and testing out cloud utils. ProblemType: KernelOops DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-8-generic 3.19.0-8.8 ProcVersionSignature: Ubuntu 3.19.0-8.8-generic 3.19.1 Uname: Linux 3.19.0-8-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia Annotation: Your system might become unstablenow and might need to be restarted. ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: bryan 2265 F pulseaudio /dev/snd/controlC2: bryan 2265 F pulseaudio /dev/snd/controlC0: bryan 2265 F pulseaudio Date: Thu Mar 12 16:47:52 2015 Failure: oops InstallationDate: Installed on 2015-01-08 (62 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20150108) MachineType: BIOSTAR Group TA890GXE ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.19.0-8-generic root=UUID=1bd032ea-0757-4aee-82d4-bbee08fd0eb8 ro rootflags=subvol=@ quiet splash PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RfKill: SourcePackage: linux Title: kernel BUG at /build/buildd/linux-3.19.0/fs/buffer.c:3006! UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/30/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 080015 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: TA890GXE dmi.board.vendor: BIOSTAR Group dmi.chassis.asset.tag: None dmi.chassis.type: 3 dmi.chassis.vendor: BIOSTAR Group dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr080015:bd05/30/2011:svnBIOSTARGroup:pnTA890GXE:pvr:rvnBIOSTARGroup:rnTA890GXE:rvr:cvnBIOSTARGroup:ct3:cvr: dmi.product.name: TA890GXE dmi.sys.vendor: BIOSTAR Group To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1431560/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1253155] Re: Failure to validate module signature at boot time
In my case: $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description:Ubuntu 14.04.3 LTS Release:14.04 Codename: trusty $ uname -rv 3.13.0-65-generic #105-Ubuntu SMP Mon Sep 21 18:50:58 UTC 2015 $ dmesg | grep -i glacier [1.764257] Loaded X.509 cert 'Magrathea: Glacier signing key: e1880bb8882cef95be763dfd1fabc4dc436c45ac' [310783.576233] Request for unknown module key 'Magrathea: Glacier signing key: 27cd636c818cdb452f9bcdff71219c6cf384f51a' err -11 [310783.577199] Request for unknown module key 'Magrathea: Glacier signing key: 27cd636c818cdb452f9bcdff71219c6cf384f51a' err -11 [310783.583592] Request for unknown module key 'Magrathea: Glacier signing key: 27cd636c818cdb452f9bcdff71219c6cf384f51a' err -11 [310783.587723] Request for unknown module key 'Magrathea: Glacier signing key: 27cd636c818cdb452f9bcdff71219c6cf384f51a' err -11 [310783.589683] Request for unknown module key 'Magrathea: Glacier signing key: 27cd636c818cdb452f9bcdff71219c6cf384f51a' err -11 [310783.591042] Request for unknown module key 'Magrathea: Glacier signing key: 27cd636c818cdb452f9bcdff71219c6cf384f51a' err -11 [310783.592743] Request for unknown module key 'Magrathea: Glacier signing key: 27cd636c818cdb452f9bcdff71219c6cf384f51a' err -11 [310783.594090] Request for unknown module key 'Magrathea: Glacier signing key: 27cd636c818cdb452f9bcdff71219c6cf384f51a' err -11 [310783.595807] Request for unknown module key 'Magrathea: Glacier signing key: 27cd636c818cdb452f9bcdff71219c6cf384f51a' err -11 [310783.596889] Request for unknown module key 'Magrathea: Glacier signing key: 27cd636c818cdb452f9bcdff71219c6cf384f51a' err -11 [310783.598472] Request for unknown module key 'Magrathea: Glacier signing key: 27cd636c818cdb452f9bcdff71219c6cf384f51a' err -11 [310783.676467] Request for unknown module key 'Magrathea: Glacier signing key: 27cd636c818cdb452f9bcdff71219c6cf384f51a' err -11 [310783.881365] Request for unknown module key 'Magrathea: Glacier signing key: 27cd636c818cdb452f9bcdff71219c6cf384f51a' err -11 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-raring in Ubuntu. https://bugs.launchpad.net/bugs/1253155 Title: Failure to validate module signature at boot time Status in linux package in Ubuntu: Fix Released Status in linux-lts-raring package in Ubuntu: Invalid Status in linux source package in Precise: Invalid Status in linux-lts-raring source package in Precise: Fix Released Status in linux source package in Quantal: Invalid Status in linux-lts-raring source package in Quantal: Invalid Status in linux source package in Saucy: Fix Released Status in linux-lts-raring source package in Saucy: Invalid Status in linux source package in Trusty: Fix Released Status in linux-lts-raring source package in Trusty: Invalid Bug description: When booting under secureboot and using a signed kernel, it's expected that all modules shipped alongside the kernel should validate and load successfully without tainting the kernel. Unfortunately it doesn't seem to always be the case. Looking through my kernel logs, I see: Nov 15 10:35:24 castiana kernel: [1.635132] video: module verification failed: signature and/or required key missing - tainting kernel or Nov 12 12:58:48 castiana kernel: [213981.753326] Request for unknown module key 'Magrathea: Glacier signing key: f440a253eb498df923d438caa09b3b5d99308405' err -11 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.12.0-2-generic 3.12.0-2.7 ProcVersionSignature: Ubuntu 3.12.0-2.7-generic 3.12.0 Uname: Linux 3.12.0-2-generic x86_64 ApportVersion: 2.12.7-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: stgraber 2721 F pulseaudio /dev/snd/controlC0: stgraber 2721 F pulseaudio /dev/snd/pcmC0D0c: stgraber 2721 F...m pulseaudio /dev/snd/pcmC0D0p: stgraber 2721 F...m pulseaudio CurrentDesktop: Unity Date: Wed Nov 20 11:59:57 2013 InstallationDate: Installed on 2013-04-21 (213 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130420) MachineType: LENOVO 2306CT0 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.12.0-2-generic.efi.signed root=UUID=14de4e20-b139-488e-863f-ec710f776851 ro quiet splash "acpi_osi=!Windows 2012" vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.12.0-2-generic N/A linux-backports-modules-3.12.0-2-generic N/A linux-firmware1.117 SourcePackage: linux StagingDrivers: zram UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/27/2013 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET96WW (2.56 ) dmi.board.asset.tag: Not Available dmi.board.name: 2306CT0 dmi.board.vendor: LENOVO dmi.board.version: NO DPK dmi.chassis.asset
[Kernel-packages] [Bug 1495983] Re: [Hyper-V] kernel panic occurs when installing Ubuntu Server 15.10 x32
** Tags removed: kernel-key -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1495983 Title: [Hyper-V] kernel panic occurs when installing Ubuntu Server 15.10 x32 Status in linux package in Ubuntu: In Progress Status in linux source package in Trusty: Incomplete Status in linux source package in Vivid: Incomplete Status in linux source package in Wily: In Progress Bug description: Attempting to install the latest build of Ubuntu Server 15.10 (Wily Werewolf) x32 on Hyper-V, after beginning installation a kernel panic occurs. The console log from the serial output is attached. http://cdimage.ubuntu.com/ubuntu-server/daily/current/ I tried with the builds from 14th and 15th of September with the same result. This bug does not affect x64 builds. Tried to start the installation with different resources with no effect, kernel panic always occurs no matter the VM settings. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1495983/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1482343] Re: Trigger a checkstop on unrecoverable MCE/HMI errors to inform BMC/OCC about the error.
** Also affects: linux (Ubuntu Vivid) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Vivid) Status: New => In Progress ** Changed in: linux (Ubuntu Vivid) Assignee: (unassigned) => Tim Gardner (timg-tpi) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1482343 Title: Trigger a checkstop on unrecoverable MCE/HMI errors to inform BMC/OCC about the error. Status in linux package in Ubuntu: Fix Released Status in linux source package in Vivid: In Progress Status in linux source package in Wily: Fix Released Bug description: The current implementation of Machine Check handler and HMI handler in Linux, goes down kernel panic path for unrecoverable errors. On FSP based system FSP also gets notified about these errors which then forwards it to PRD (that runs on FSP) for error analysis and gard record creation. On OpenPower (BMC based system e.g. Habanero from TYAN) where PRD runs in Linux host, it never gets a chance to do error analysis at the time of Linux crash and no gard record is created for such errors. Since the faulty component never gets de-configured, the system is vulnerable to get hit by same HW error again. To fix this issue, a new OPAL call 'opal_cec_reboot2()' has been introduced to trigger a checkstop on BMC based system to inform BMC/OCC about this error, so that BMC can collect relevant data for error analysis and decide what component to de-configure before rebooting. Linux kernel should invoke this opal call for unrecoverable MCE and HMI instead before calling kernel panic so that OCC is informed about the error. The kernel changes has already been posted to upstream and are listed below: https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-May/128341.html https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-May/128342.html https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-August/132045.html https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-August/132114.html Above patches needs to be included in ubuntu 14.04.3+ We will update this bug with commit ids, once the above patches are accepted upstream. Contact Information = mahesh.salgaon...@in.ibm.com ---uname output--- Linux rcx2d403 3.19.0-26-generic #27 SMP Tue Aug 4 01:38:15 CDT 2015 ppc64le ppc64le ppc64le GNU/Linux ---Additional Hardware Info--- Habanero pass2 system Machine Type = OpenPower, Habanero ---System Hang--- If system is hung, it can be recovered by sending ipmi power off/on command. $ ipmitool -H -I lanplus -U -P power off $ ipmitool -H -I lanplus -U -P power on To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1482343/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1497812] Re: i40e bug: non physical MAC outbound frames appear as copied back inbound (mirrored)
** Tags removed: kernel-key -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1497812 Title: i40e bug: non physical MAC outbound frames appear as copied back inbound (mirrored) Status in linux package in Ubuntu: In Progress Status in linux-lts-vivid package in Ubuntu: Confirmed Status in linux source package in Vivid: In Progress Status in linux-lts-vivid source package in Vivid: Confirmed Bug description: Using 3.19.0-28-generic #30~14.04.1-Ubuntu with stock i40e driver version 2.2.2-k makes every 'non physical' MAC output frame appear as copied back at input, as if the switch was doing frame 'mirroring' (and/or hair-pinning). FYI same setup, with i40e upgraded to 1.2.48 from http://downloadmirror.intel.com/25282/eng/i40e-1.2.48.tar.gz behaves OK, fyi also we did a port mirroring setup at the switch directed to a different physical port for debugging, and didn't observe these frames to be physically present. See tcpdump -P in/out and more details at http://paste.ubuntu.com/12511680/ ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.19.0-28-generic 3.19.0-28.30~14.04.1 ProcVersionSignature: Ubuntu 3.19.0-28.30~14.04.1-generic 3.19.8-ckt5 Uname: Linux 3.19.0-28-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.13 Architecture: amd64 Date: Mon Sep 21 02:05:28 2015 ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: linux-lts-vivid UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1497812/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1450396] Re: Gigabyte P35-DS3: does not stay suspended with default "ug" wake-on-lan setting
** Attachment added: "Output of dmesg after next reboot" https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1450396/+attachment/4486124/+files/dmesg-after-next-reboot.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1450396 Title: Gigabyte P35-DS3: does not stay suspended with default "ug" wake-on- lan setting Status in linux package in Ubuntu: Incomplete Status in systemd package in Ubuntu: Triaged Bug description: === Update: This bug was reported from BIOS version F13 of my board, in the meantime I upgraded to the most recent version F14, but this had no impact on the bug. === Hello, using Suspend-to-RAM on my system has stopped working reliably on Vivid when booting with Systemd. When I try to suspend my PC the following happens: - PC turns off - PC unwantedly wakes up (turns on) by itself again. This time span until it turns on again can reach from a second (almost immediately) until two or three minutes. - In a few cases (<25%), the PC stays suspended properly. A way to workaround this problem is to boot my PC with Upstart instead of Systemd, then this problem never happens (and has never happened in any of the previous Ubuntu versions since 2008). Thus it seems to be a bug somehow related to Systemd. Other steps I have tried to solve the problem (without any success): - Checking BIOS settings, all options are set that way that the PC should never wake up by any event other than pressing the power button. - Checking by running "cat /proc/acpi/wakeup | grep enabled" if any device could cause wake up events. This lists my USB controller, but deactivating it (with commands like "echo USB0 > /proc/acpi/wakeup") had no success on the problem. Also suspend while running Upstart works fine despite the USB controller listed as "enabled". In the system logs I could see no hint what causes the undesired wake- ups. Allthough there is one factor which seems to have a certain influence: If I close programs like Pidgin, Skype or Firefox that cause continuous network traffic, the chance is higher that my PC will stay suspened (while runinng Systemd). Kind regards, Jan ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: systemd 219-7ubuntu3 ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Thu Apr 30 11:24:46 2015 InstallationDate: Installed on 2015-04-16 (13 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Beta amd64 (20150415) MachineType: Gigabyte Technology Co., Ltd. P35-DS3 ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.19.0-15-generic root=/dev/mapper/internal--ssd-root ro rootflags=subvol=@ quiet splash SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/10/2008 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: F13 dmi.board.name: P35-DS3 dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF13:bd07/10/2008:svnGigabyteTechnologyCo.,Ltd.:pnP35-DS3:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnP35-DS3:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: P35-DS3 dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1450396/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1482343] Re: Trigger a checkstop on unrecoverable MCE/HMI errors to inform BMC/OCC about the error.
Submitted for Vivid: https://lists.ubuntu.com/archives/kernel- team/2015-October/063607.html -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1482343 Title: Trigger a checkstop on unrecoverable MCE/HMI errors to inform BMC/OCC about the error. Status in linux package in Ubuntu: Fix Released Status in linux source package in Vivid: In Progress Status in linux source package in Wily: Fix Released Bug description: The current implementation of Machine Check handler and HMI handler in Linux, goes down kernel panic path for unrecoverable errors. On FSP based system FSP also gets notified about these errors which then forwards it to PRD (that runs on FSP) for error analysis and gard record creation. On OpenPower (BMC based system e.g. Habanero from TYAN) where PRD runs in Linux host, it never gets a chance to do error analysis at the time of Linux crash and no gard record is created for such errors. Since the faulty component never gets de-configured, the system is vulnerable to get hit by same HW error again. To fix this issue, a new OPAL call 'opal_cec_reboot2()' has been introduced to trigger a checkstop on BMC based system to inform BMC/OCC about this error, so that BMC can collect relevant data for error analysis and decide what component to de-configure before rebooting. Linux kernel should invoke this opal call for unrecoverable MCE and HMI instead before calling kernel panic so that OCC is informed about the error. The kernel changes has already been posted to upstream and are listed below: https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-May/128341.html https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-May/128342.html https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-August/132045.html https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-August/132114.html Above patches needs to be included in ubuntu 14.04.3+ We will update this bug with commit ids, once the above patches are accepted upstream. Contact Information = mahesh.salgaon...@in.ibm.com ---uname output--- Linux rcx2d403 3.19.0-26-generic #27 SMP Tue Aug 4 01:38:15 CDT 2015 ppc64le ppc64le ppc64le GNU/Linux ---Additional Hardware Info--- Habanero pass2 system Machine Type = OpenPower, Habanero ---System Hang--- If system is hung, it can be recovered by sending ipmi power off/on command. $ ipmitool -H -I lanplus -U -P power off $ ipmitool -H -I lanplus -U -P power on To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1482343/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1450396] Re: Gigabyte P35-DS3: does not stay suspended with default "ug" wake-on-lan setting
Ok, I made a resume trace with my workaround deactivated on Kernel 4.3-rc4, while the bug (= waking up automatically) appeared. I have attached two dmesg files: The first one contains the output directly after resume. The second one contains the output directly after the next reboot. I'm not sure which one is more useful in my case. Kind regards, Jan ** Attachment added: "Output of dmesg directly after resume" https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1450396/+attachment/4486123/+files/dmesg-directly-after-resume.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1450396 Title: Gigabyte P35-DS3: does not stay suspended with default "ug" wake-on- lan setting Status in linux package in Ubuntu: Incomplete Status in systemd package in Ubuntu: Triaged Bug description: === Update: This bug was reported from BIOS version F13 of my board, in the meantime I upgraded to the most recent version F14, but this had no impact on the bug. === Hello, using Suspend-to-RAM on my system has stopped working reliably on Vivid when booting with Systemd. When I try to suspend my PC the following happens: - PC turns off - PC unwantedly wakes up (turns on) by itself again. This time span until it turns on again can reach from a second (almost immediately) until two or three minutes. - In a few cases (<25%), the PC stays suspended properly. A way to workaround this problem is to boot my PC with Upstart instead of Systemd, then this problem never happens (and has never happened in any of the previous Ubuntu versions since 2008). Thus it seems to be a bug somehow related to Systemd. Other steps I have tried to solve the problem (without any success): - Checking BIOS settings, all options are set that way that the PC should never wake up by any event other than pressing the power button. - Checking by running "cat /proc/acpi/wakeup | grep enabled" if any device could cause wake up events. This lists my USB controller, but deactivating it (with commands like "echo USB0 > /proc/acpi/wakeup") had no success on the problem. Also suspend while running Upstart works fine despite the USB controller listed as "enabled". In the system logs I could see no hint what causes the undesired wake- ups. Allthough there is one factor which seems to have a certain influence: If I close programs like Pidgin, Skype or Firefox that cause continuous network traffic, the chance is higher that my PC will stay suspened (while runinng Systemd). Kind regards, Jan ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: systemd 219-7ubuntu3 ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Thu Apr 30 11:24:46 2015 InstallationDate: Installed on 2015-04-16 (13 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Beta amd64 (20150415) MachineType: Gigabyte Technology Co., Ltd. P35-DS3 ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.19.0-15-generic root=/dev/mapper/internal--ssd-root ro rootflags=subvol=@ quiet splash SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/10/2008 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: F13 dmi.board.name: P35-DS3 dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF13:bd07/10/2008:svnGigabyteTechnologyCo.,Ltd.:pnP35-DS3:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnP35-DS3:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: P35-DS3 dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1450396/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1346917] Re: Using KSM on NUMA capable machines can cause KVM guest performance and stability issues
This is NOT fixed by 3.13.0-33.58. It continues to persist even with 3.13.0-65.106 (and 3.13.0-63.103). I have around 10 VMs running but ONE in particular disconnects from the network every hour or so. I had this issue previously but it was initially gone on Ubuntu 14.04 LTS but had come back recently - perhaps some kernel regression ? dmesg shows [42524.196629] kvm: zapping shadow pages for mmio generation wraparound [42538.140013] br0: port 2(vnet0) entered learning state [42538.268017] br1: port 2(vnet1) entered learning state [42553.180008] br0: topology change detected, propagating [42553.180015] br0: port 2(vnet0) entered forwarding state [42553.308008] br1: topology change detected, propagating [42553.308014] br1: port 2(vnet1) entered forwarding state (and NIC connection is gone) It's not clear if this is just co-incidence or if this is a pointer to the issue. This VM is unusual in my VMs becuase it is the only one with 2 NIC connections to br1 and br0. All the others connect to just br0. Those others work OK. Happy to try suggestions to track this down. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1346917 Title: Using KSM on NUMA capable machines can cause KVM guest performance and stability issues Status in linux package in Ubuntu: Fix Released Status in linux source package in Trusty: Fix Released Bug description: [Impact] When using KVM on NUMA machines, both Linux and Windows guests can exhibit very poor performance and potential crashes. Disabling KSM is a known workaround to fix this issue. [Fix] The following patch fixes the issue in our testing: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=64a9a34e22896dad430e21a28ad8cb00a756fefc This patch is present in v3.14-rc1 and onwards. [Test Case] General test case: 1) On a NUMA capable machine, setup the machine as a KVM hypervisor - lscpu should show more than 1 NUMA node 2) Install 4 KVM VMs 3) Run the following in another terminal to ensure that pages_shared and pages_sharing is increasing - watch 'tail /sys/kernel/mm/ksm/*' 4) In another terminal run a program that continually pings each node and alerts on high latencies What we've observed is that in Linux guests, the ping latencies can go into the ~2 second range for a few pings, then return back to the < 1ms range. (This is machine dependent.) In addition, occasionally when running this test with Windows guests we observe BSODs during this test. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1346917/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503127] Re: linux-lts-vivid: 3.19.0-31.35~14.04.1 -proposed tracker
** Changed in: kernel-sru-workflow/prepare-package-signed Status: New => Fix Released ** Changed in: kernel-sru-workflow/prepare-package-signed Assignee: Canonical Kernel Team (canonical-kernel-team) => Luis Henriques (henrix) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-vivid in Ubuntu. https://bugs.launchpad.net/bugs/1503127 Title: linux-lts-vivid: 3.19.0-31.35~14.04.1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: New Status in Kernel SRU Workflow certification-testing series: New Status in Kernel SRU Workflow prepare-package series: New Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: New Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: New Status in Kernel SRU Workflow security-signoff series: New Status in Kernel SRU Workflow verification-testing series: New Status in linux-lts-vivid package in Ubuntu: Invalid Status in linux-lts-vivid source package in Trusty: New Bug description: This bug is for tracking the 3.19.0-31.35~14.04.1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 06. October 2015 05:00 UTC kernel-stable-phase:Prepare kernel-stable-phase-changed:Tuesday, 06. October 2015 05:00 UTC kernel-stable-master-bug:1503005 To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1503127/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1501899] Re: package linux-image-3.19.0-30-generic 3.19.0-30.33 failed to install/upgrade: subprocess new pre-installation script returned error exit status 128
I'm using an i7 2580k, 16gb ballistix ram, but an old geforce 8400 and seagate baracuda, so it might have to do with those. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1501899 Title: package linux-image-3.19.0-30-generic 3.19.0-30.33 failed to install/upgrade: subprocess new pre-installation script returned error exit status 128 Status in linux package in Ubuntu: Confirmed Bug description: after applying upgrade, system reported error. resolution was set to low, but it came back to normal after restart. Reboot has not solved the problem (system error message boxes continue to pop up from time to time) ProblemType: Package DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-30-generic 3.19.0-30.33 ProcVersionSignature: Ubuntu 3.19.0-30.33-generic 3.19.8-ckt6 Uname: Linux 3.19.0-30-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ddm1671 F pulseaudio /dev/snd/controlC1: ddm1671 F pulseaudio Date: Tue Sep 29 12:06:34 2015 DuplicateSignature: package:linux-image-3.19.0-30-generic:3.19.0-30.33:subprocess new pre-installation script returned error exit status 128 ErrorMessage: subprocess new pre-installation script returned error exit status 128 HibernationDevice: RESUME=UUID=3c9ac476-5c75-4114-a339-841c122fbf6a InstallationDate: Installed on 2015-05-12 (141 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-30-generic root=UUID=af887ef8-4b5d-4289-915f-5463a4b4a87c ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: grub-pc 2.02~beta2-22ubuntu1.1 RfKill: SourcePackage: linux Title: package linux-image-3.19.0-30-generic 3.19.0-30.33 failed to install/upgrade: subprocess new pre-installation script returned error exit status 128 UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/12/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P1.50 dmi.board.name: 990FX Extreme3 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP1.50:bd10/12/2012:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rn990FXExtreme3:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1501899/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1346917] Re: Using KSM on NUMA capable machines can cause KVM guest performance and stability issues
This could be a different issue. For now can you file a new bug with additional information? Running: 'apport-bug linux' in a terminal would be best as it collects dmesg output and package versions. Any description or examples of how to reproduce would be very helpful in tracking this down. Thanks! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1346917 Title: Using KSM on NUMA capable machines can cause KVM guest performance and stability issues Status in linux package in Ubuntu: Fix Released Status in linux source package in Trusty: Fix Released Bug description: [Impact] When using KVM on NUMA machines, both Linux and Windows guests can exhibit very poor performance and potential crashes. Disabling KSM is a known workaround to fix this issue. [Fix] The following patch fixes the issue in our testing: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=64a9a34e22896dad430e21a28ad8cb00a756fefc This patch is present in v3.14-rc1 and onwards. [Test Case] General test case: 1) On a NUMA capable machine, setup the machine as a KVM hypervisor - lscpu should show more than 1 NUMA node 2) Install 4 KVM VMs 3) Run the following in another terminal to ensure that pages_shared and pages_sharing is increasing - watch 'tail /sys/kernel/mm/ksm/*' 4) In another terminal run a program that continually pings each node and alerts on high latencies What we've observed is that in Linux guests, the ping latencies can go into the ~2 second range for a few pings, then return back to the < 1ms range. (This is machine dependent.) In addition, occasionally when running this test with Windows guests we observe BSODs during this test. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1346917/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1346917] Re: Using KSM on NUMA capable machines can cause KVM guest performance and stability issues
I think this is a different issue you're describing, connectivity doesn't drop with this but it becomes very flakey, large latency spikes, etc. It would never 100% drop -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1346917 Title: Using KSM on NUMA capable machines can cause KVM guest performance and stability issues Status in linux package in Ubuntu: Fix Released Status in linux source package in Trusty: Fix Released Bug description: [Impact] When using KVM on NUMA machines, both Linux and Windows guests can exhibit very poor performance and potential crashes. Disabling KSM is a known workaround to fix this issue. [Fix] The following patch fixes the issue in our testing: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=64a9a34e22896dad430e21a28ad8cb00a756fefc This patch is present in v3.14-rc1 and onwards. [Test Case] General test case: 1) On a NUMA capable machine, setup the machine as a KVM hypervisor - lscpu should show more than 1 NUMA node 2) Install 4 KVM VMs 3) Run the following in another terminal to ensure that pages_shared and pages_sharing is increasing - watch 'tail /sys/kernel/mm/ksm/*' 4) In another terminal run a program that continually pings each node and alerts on high latencies What we've observed is that in Linux guests, the ping latencies can go into the ~2 second range for a few pings, then return back to the < 1ms range. (This is machine dependent.) In addition, occasionally when running this test with Windows guests we observe BSODs during this test. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1346917/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1374759] Re: >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
I also have this issue with a Ubuntu 15.04 on a HP server with 3 disks in raid 5. It seems grub wants to test on one of the disks of my raid. This is really scary. Grub seems to want to mount the second disk of the raid separately??? Linux CmsrvVH3 3.19.0-30-generic #33-Ubuntu SMP Mon Sep 21 20:58:04 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux See log below... (I have a the same server also with Ubuntu 14.04.3 LTS with 4 disks in raid 5 and 4 disks in raid 10. Here I don't have this issue. Linux CmsrvVH2 3.19.0-30-generic #33~14.04.1-Ubuntu SMP Tue Sep 22 09:27:00 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux) Oct 6 03:36:04 CmsrvVH3 kernel: [49638.681667] QNX4 filesystem 0.2.3 registered. Oct 6 03:36:04 CmsrvVH3 kernel: [49638.684795] Request for unknown module key 'Magrathea: Glacier signing key: 08411dd668c266d59a96c625b3012497b2351542' err -11 Oct 6 03:36:05 CmsrvVH3 kernel: [49639.928320] EXT4-fs (cciss!c0d0p2): unable to read superblock Oct 6 03:36:05 CmsrvVH3 kernel: [49639.960826] EXT4-fs (cciss!c0d0p2): unable to read superblock Oct 6 03:36:05 CmsrvVH3 kernel: [49639.962326] EXT4-fs (cciss!c0d0p2): unable to read superblock Oct 6 03:36:05 CmsrvVH3 kernel: [49639.963760] FAT-fs (cciss/c0d0p2): bogus number of reserved sectors Oct 6 03:36:05 CmsrvVH3 kernel: [49639.963853] FAT-fs (cciss/c0d0p2): Can't find a valid FAT filesystem Oct 6 03:36:05 CmsrvVH3 kernel: [49639.970120] XFS (cciss/c0d0p2): Invalid superblock magic number Oct 6 03:36:05 CmsrvVH3 kernel: [49639.972479] FAT-fs (cciss/c0d0p2): bogus number of reserved sectors Oct 6 03:36:05 CmsrvVH3 kernel: [49639.972569] FAT-fs (cciss/c0d0p2): Can't find a valid FAT filesystem Oct 6 03:36:05 CmsrvVH3 kernel: [49639.976369] MINIX-fs: unable to read superblock Oct 6 03:36:05 CmsrvVH3 kernel: [49639.978463] Request for unknown module key 'Magrathea: Glacier signing key: 08411dd668c266d59a96c625b3012497b2351542' err -11 Oct 6 03:36:05 CmsrvVH3 kernel: [49639.983525] attempt to access beyond end of device Oct 6 03:36:05 CmsrvVH3 kernel: [49639.983528] cciss/c0d0p2: rw=16, want=3, limit=2 Oct 6 03:36:05 CmsrvVH3 kernel: [49639.983531] hfsplus: unable to find HFS+ superblock Oct 6 03:36:05 CmsrvVH3 kernel: [49639.984786] qnx4: no qnx4 filesystem (no root dir). Oct 6 03:36:05 CmsrvVH3 kernel: [49639.986333] ufs: You didn't specify the type of your ufs filesystem Oct 6 03:36:05 CmsrvVH3 kernel: [49639.986333] Oct 6 03:36:05 CmsrvVH3 kernel: [49639.986333] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... Oct 6 03:36:05 CmsrvVH3 kernel: [49639.986333] Oct 6 03:36:05 CmsrvVH3 kernel: [49639.986333] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old Oct 6 03:36:05 CmsrvVH3 kernel: [49639.991044] hfs: can't find a HFS filesystem on dev cciss/c0d0p2 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1374759 Title: >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old Status in initramfs-tools package in Ubuntu: Confirmed Status in linux package in Ubuntu: Triaged Status in os-prober package in Ubuntu: Confirmed Bug description: [ 556.734157] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 556.746268] JFS: nTxBlock = 8192, nTxLock = 65536 [ 556.763789] ntfs: driver 2.1.30 [Flags: R/O MODULE]. [ 556.792231] QNX4 filesystem 0.2.3 registered. [ 557.922469] EXT4-fs (sda4): unable to read superblock [ 557.925868] EXT4-fs (sda4): unable to read superblock [ 557.928967] EXT4-fs (sda4): unable to read superblock [ 557.931784] FAT-fs (sda4): bogus number of reserved sectors [ 557.931791] FAT-fs (sda4): Can't find a valid FAT filesystem [ 557.946740] XFS (sda4): Invalid superblock magic number [ 557.951904] FAT-fs (sda4): bogus number of reserved sectors [ 557.951911] FAT-fs (sda4): Can't find a valid FAT filesystem [ 557.959099] MINIX-fs: unable to read superblock [ 557.965712] attempt to access beyond end of device [ 557.965721] sda4: rw=16, want=3, limit=2 [ 557.965725] hfsplus: unable to find HFS+ superblock [ 557.968487] qnx4: no qnx4 filesystem (no root dir). [ 557.971203] You didn't specify the type of your ufs filesystem mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep |nextstep-cd|openstep ... >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 557.974459] hfs: can't find a HFS filesystem on dev sda4 [ 564.034208] EXT4-fs (sda4): unable to read superblock [ 564.040322] EXT4-fs (sda4): unable to read superblock [ 564.043485] EXT4-fs (sda4): unable to read superblock [ 564.047076] FAT-fs (sda4): bogus number of reserved sectors [ 564.047083] FAT-fs (sda4): Can't find a valid FAT filesystem [ 564.059578] XFS (sda4): Invalid superbloc
[Kernel-packages] [Bug 1501986] Re: Wifi signals are unstable and drops after sometime in RTL8723BE
I've already installed the latest version of mainline kernel available at the date. But the issue ain't changes too much. The wifi still gets low signals and still disconnects occasionally. kernel-bug-exists-upstream-V4.3-RC3-unstable -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1501986 Title: Wifi signals are unstable and drops after sometime in RTL8723BE Status in linux package in Ubuntu: Incomplete Bug description: I'm using ubuntu 14.04 on my new laptop from HP( HP pavillion 15-ab032tx). It has got a network card from realtek which seems to be really buggy as of now. When I'm connected to a network either the wifi signals are damn low or they just vanish. And at the same time my other devices captures full wifi signals. Moreover the wifi just ain't works after suspend. Also I've tried updating the drivers. The current version of network driver is : rtl8723be. My kernel version is :3.13.0-65-generic. But nothing changes. Please help me out. Also I'm not so experienced with ubuntu so kindly tell me everything in details so that I can follow the commands. Thanks in advance. Other Details : Description: Ubuntu 14.04.3 LTS Release: 14.04 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-65-generic 3.13.0-65.105 ProcVersionSignature: Ubuntu 3.13.0-65.105-generic 3.13.11-ckt26 Uname: Linux 3.13.0-65-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.15 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: entangler 1822 F pulseaudio /dev/snd/controlC0: entangler 1822 F pulseaudio CRDA: country IN: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5735 - 5835 @ 40), (N/A, 20) CurrentDesktop: Unity Date: Fri Oct 2 07:44:13 2015 HibernationDevice: RESUME=UUID=b0be136a-5f24-44d5-a36d-3b5e7ea2ab7f InstallationDate: Installed on 2015-09-01 (30 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0bda:b006 Realtek Semiconductor Corp. Bus 001 Device 002: ID 064e:930a Suyin Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Hewlett-Packard HP Pavilion Notebook ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-65-generic.efi.signed root=UUID=81ab3f87-cfd4-4f97-b7f3-a73cf5ead0c9 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-65-generic N/A linux-backports-modules-3.13.0-65-generic N/A linux-firmware 1.127.15 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/31/2015 dmi.bios.vendor: Insyde dmi.bios.version: F.03 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8096 dmi.board.vendor: Hewlett-Packard dmi.board.version: 89.11 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.03:bd03/31/2015:svnHewlett-Packard:pnHPPavilionNotebook:pvrType1ProductConfigId:rvnHewlett-Packard:rn8096:rvr89.11:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion Notebook dmi.product.version: Type1ProductConfigId dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1501986/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1491850] installed policykit first then no error
--- Comment (attachment only) From ye...@us.ibm.com 2015-10-06 16:57 EDT--- ** Attachment added: "installed policykit first then no error" https://bugs.launchpad.net/bugs/1491850/+attachment/4486217/+files/callalp3_install_policykit_first.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1491850 Title: ISST-LTE: Ubuntu 15.10 fails to install Linux-crashdump packages Status in crashdump package in Ubuntu: New Status in linux package in Ubuntu: New Bug description: == Comment: #0 - YUECHANG E. MEI - 2015-09-02 12:57:52 == ---Problem Description--- We tried to install linux-crashdump package (using "apt-get install linux-crashdump") in Ubuntu 15.10 lpar, but fails and hit some errors. Since we have similar bug 122925 open in Ubuntu 15.04 (LP bug# LP1436448), we used the work around in bug 122925 and the linux-crashdump get install successfully. Error we see when we install linux-crashdump: root@conelp2:~# apt-get install linux-crashdump Unpacking linux-crashdump (4.1.0.3.3) ... Selecting previously unselected package policykit-1. Preparing to unpack .../policykit-1_0.105-11_ppc64el.deb ... Unpacking policykit-1 (0.105-11) ... Processing triggers for man-db (2.7.2-1) ... Processing triggers for shared-mime-info (1.3-1) ... Processing triggers for ureadahead (0.100.0-19) ... ureadahead will be reprofiled on next reboot Processing triggers for systemd (224-2ubuntu2) ... Error getting authority: Error initializing authority: Error calling StartServiceByName for org.freedesktop.PolicyKit1: GDBus.Error:org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.freedesktop.PolicyKit1': timed out (g-dbus-error-quark, 20) Failed to execute operation: Connection timed out dpkg: error processing package systemd (--unpack): subprocess installed post-installation script returned error exit status 1 Processing triggers for dbus (1.9.20-1ubuntu2) ... Errors were encountered while processing: systemd E: Sub-process /usr/bin/dpkg returned an error code (1) root@conelp2:~# dpkg -l | grep linux-crashdump iU linux-crashdump 4.1.0.3.3 ppc64el Linux kernel crashdump setup for the latest generic kernel ---uname output--- Linux conelp2 4.1.0-3-generic #3-Ubuntu SMP Tue Jul 28 12:23:44 UTC 2015 ppc64le ppc64le ppc64le GNU/Linux Machine Type = n/a ---Debugger--- A debugger is not configured ---Steps to Reproduce--- 1. Install Ubuntu 15.10 in a lpar 2. Login as root, and run "apt-get update". 3. Install linux-crashdump packages, run "apt-get install linux-crashdump", then you will see the error Stack trace output: no Oops output: no System Dump Info: The system is not configured to capture a system dump. *Additional Instructions for Yuechang (Erin) Mei /ye...@us.ibm.com, Raja Sunkari /rajas...@in.ibm.com: -Attach sysctl -a output output to the bug. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/crashdump/+bug/1491850/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1491850] Intall crashdump packages first and hit the error
--- Comment (attachment only) From ye...@us.ibm.com 2015-10-06 16:57 EDT--- ** Attachment added: "Intall crashdump packages first and hit the error" https://bugs.launchpad.net/bugs/1491850/+attachment/4486216/+files/callalp3_install_kdump_first.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1491850 Title: ISST-LTE: Ubuntu 15.10 fails to install Linux-crashdump packages Status in crashdump package in Ubuntu: New Status in linux package in Ubuntu: New Bug description: == Comment: #0 - YUECHANG E. MEI - 2015-09-02 12:57:52 == ---Problem Description--- We tried to install linux-crashdump package (using "apt-get install linux-crashdump") in Ubuntu 15.10 lpar, but fails and hit some errors. Since we have similar bug 122925 open in Ubuntu 15.04 (LP bug# LP1436448), we used the work around in bug 122925 and the linux-crashdump get install successfully. Error we see when we install linux-crashdump: root@conelp2:~# apt-get install linux-crashdump Unpacking linux-crashdump (4.1.0.3.3) ... Selecting previously unselected package policykit-1. Preparing to unpack .../policykit-1_0.105-11_ppc64el.deb ... Unpacking policykit-1 (0.105-11) ... Processing triggers for man-db (2.7.2-1) ... Processing triggers for shared-mime-info (1.3-1) ... Processing triggers for ureadahead (0.100.0-19) ... ureadahead will be reprofiled on next reboot Processing triggers for systemd (224-2ubuntu2) ... Error getting authority: Error initializing authority: Error calling StartServiceByName for org.freedesktop.PolicyKit1: GDBus.Error:org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.freedesktop.PolicyKit1': timed out (g-dbus-error-quark, 20) Failed to execute operation: Connection timed out dpkg: error processing package systemd (--unpack): subprocess installed post-installation script returned error exit status 1 Processing triggers for dbus (1.9.20-1ubuntu2) ... Errors were encountered while processing: systemd E: Sub-process /usr/bin/dpkg returned an error code (1) root@conelp2:~# dpkg -l | grep linux-crashdump iU linux-crashdump 4.1.0.3.3 ppc64el Linux kernel crashdump setup for the latest generic kernel ---uname output--- Linux conelp2 4.1.0-3-generic #3-Ubuntu SMP Tue Jul 28 12:23:44 UTC 2015 ppc64le ppc64le ppc64le GNU/Linux Machine Type = n/a ---Debugger--- A debugger is not configured ---Steps to Reproduce--- 1. Install Ubuntu 15.10 in a lpar 2. Login as root, and run "apt-get update". 3. Install linux-crashdump packages, run "apt-get install linux-crashdump", then you will see the error Stack trace output: no Oops output: no System Dump Info: The system is not configured to capture a system dump. *Additional Instructions for Yuechang (Erin) Mei /ye...@us.ibm.com, Raja Sunkari /rajas...@in.ibm.com: -Attach sysctl -a output output to the bug. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/crashdump/+bug/1491850/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1491850] Comment bridged from LTC Bugzilla
--- Comment From ye...@us.ibm.com 2015-10-06 16:55 EDT--- (In reply to comment #22) > it seems that bug#1447654 was not fixed released yet. Can you double check > if this version has the fix? I reinstalled the lpar and did these after lpar boot up from installation. 1. Ran "apt-get update" 2. Ran "apt-get install linux-crashdump", select "no" when it asked "Should kexec-tools handle reboots?" 3. Then I saw this error: Unpacking policykit-1 (0.105-11ubuntu1) ... Processing triggers for man-db (2.7.3-1) ... Processing triggers for shared-mime-info (1.3-1) ... Processing triggers for ureadahead (0.100.0-19) ... ureadahead will be reprofiled on next reboot Processing triggers for systemd (225-1ubuntu7) ... Error getting authority: Error initializing authority: Error calling StartServiceByName for org.freedesktop.PolicyKit1: Timeout was reached (g-io-error-quark, 24) Failed to execute operation: Connection timed out dpkg: error processing package systemd (--unpack): subprocess installed post-installation script returned error exit status 1 Processing triggers for dbus (1.10.0-1ubuntu1) ... Errors were encountered while processing: systemd E: Sub-process /usr/bin/dpkg returned an error code (1) root@callalp3:~# dpkg -l | grep crashdump iU linux-crashdump4.2.0.14.15 ppc64el Linux kernel crashdump setup for the latest generic kernel root@callalp3:~# dpkg -l | grep policykit-1 iU policykit-10.105-11ubuntu1 ppc64el framework for managing administrative policies and privileges Then I tried again. I reinstalled the lpar and did the following: 1. Ran "apt-get update" 2. Ran "apt-get install policykit-1" root@callalp3:~# dpkg -l | grep policykit ii policykit-10.105-11ubuntu1 ppc64el framework for managing administrative policies and privileges 3. Ran "apt-get install linux-crashdump", select "no" when it asked "Should kexec-tools handle reboots?" 4. I didn't see the error message, and the linux-crashdump and policykit-1 packages were properly installed. I will upload the putty screen outputs, so you can check and see the detailed output. Is these what you want me to verify? Please let me know if I missed anything, thank you! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1491850 Title: ISST-LTE: Ubuntu 15.10 fails to install Linux-crashdump packages Status in crashdump package in Ubuntu: New Status in linux package in Ubuntu: New Bug description: == Comment: #0 - YUECHANG E. MEI - 2015-09-02 12:57:52 == ---Problem Description--- We tried to install linux-crashdump package (using "apt-get install linux-crashdump") in Ubuntu 15.10 lpar, but fails and hit some errors. Since we have similar bug 122925 open in Ubuntu 15.04 (LP bug# LP1436448), we used the work around in bug 122925 and the linux-crashdump get install successfully. Error we see when we install linux-crashdump: root@conelp2:~# apt-get install linux-crashdump Unpacking linux-crashdump (4.1.0.3.3) ... Selecting previously unselected package policykit-1. Preparing to unpack .../policykit-1_0.105-11_ppc64el.deb ... Unpacking policykit-1 (0.105-11) ... Processing triggers for man-db (2.7.2-1) ... Processing triggers for shared-mime-info (1.3-1) ... Processing triggers for ureadahead (0.100.0-19) ... ureadahead will be reprofiled on next reboot Processing triggers for systemd (224-2ubuntu2) ... Error getting authority: Error initializing authority: Error calling StartServiceByName for org.freedesktop.PolicyKit1: GDBus.Error:org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.freedesktop.PolicyKit1': timed out (g-dbus-error-quark, 20) Failed to execute operation: Connection timed out dpkg: error processing package systemd (--unpack): subprocess installed post-installation script returned error exit status 1 Processing triggers for dbus (1.9.20-1ubuntu2) ... Errors were encountered while processing: systemd E: Sub-process /usr/bin/dpkg returned an error code (1) root@conelp2:~# dpkg -l | grep linux-crashdump iU linux-crashdump 4.1.0.3.3 ppc64el Linux kernel crashdump setup for the latest generic kernel ---uname output--- Linux conelp2 4.1.0-3-generic #3-Ubuntu SMP Tue Jul 28 12:23:44 UTC 2015 ppc64le ppc64le ppc64le GNU/Linux Machine Type = n/a ---Debugger--- A debugger is not configured ---Steps to Reproduce--- 1. Install Ubuntu 15.10 in a lpar 2. Login as root, and run "apt-get update". 3. Install linux-crashdump packages, run "apt-get install linux-crashdump", then you will see the error Stack trace output: no Oops output: no System Dump Info: The system is not configured to capture a syst
[Kernel-packages] [Bug 1503118] Re: linux-lts-trusty: 3.13.0-66.107~precise1 -proposed tracker
All builds are complete, packages in this bug can be copied to -proposed. ** Changed in: kernel-sru-workflow/prepare-package Status: New => Fix Released ** Changed in: kernel-sru-workflow/prepare-package Assignee: Canonical Kernel Team (canonical-kernel-team) => Luis Henriques (henrix) ** Changed in: kernel-sru-workflow/promote-to-proposed Status: New => Confirmed ** Description changed: This bug is for tracking the 3.13.0-66.107~precise1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 06. October 2015 04:02 UTC - kernel-stable-phase:Prepare - kernel-stable-phase-changed:Tuesday, 06. October 2015 04:02 UTC kernel-stable-master-bug:1503021 + kernel-stable-phase:CopyToProposed + kernel-stable-Prepare-package-end:Tuesday, 06. October 2015 17:01 UTC + kernel-stable-Promote-to-proposed-start:Tuesday, 06. October 2015 17:01 UTC + kernel-stable-phase-changed:Tuesday, 06. October 2015 17:01 UTC -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1503118 Title: linux-lts-trusty: 3.13.0-66.107~precise1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: New Status in Kernel SRU Workflow certification-testing series: New Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Confirmed Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: New Status in Kernel SRU Workflow security-signoff series: New Status in Kernel SRU Workflow verification-testing series: New Status in linux-lts-trusty package in Ubuntu: Invalid Status in linux-lts-trusty source package in Precise: New Bug description: This bug is for tracking the 3.13.0-66.107~precise1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 06. October 2015 04:02 UTC kernel-stable-master-bug:1503021 kernel-stable-phase:CopyToProposed kernel-stable-Prepare-package-end:Tuesday, 06. October 2015 17:01 UTC kernel-stable-Promote-to-proposed-start:Tuesday, 06. October 2015 17:01 UTC kernel-stable-phase-changed:Tuesday, 06. October 2015 17:01 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1503118/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1497966] [NEW] ISST-KVM:R3-0:Firestone:Ubuntu14043:beng2:Cannot reach network with Shiner T adapter
You have been subscribed to a public bug: Problem Description: === - Ping hangs or throws error message "Destination Host Unreachable" when IP is configured over pci-pt Shiner T adapter interface either dhcp entry or assigning IP statically assigning IP. Steps to Reproduce: == - beng2 has been installed with daily build 20150914 Logs: root@beng2:~# uname -a Linux beng2 3.19.0-28-generic #30~14.04.1-Ubuntu SMP Tue Sep 1 09:32:56 UTC 2015 ppc64le ppc64le ppc64le GNU/Linux root@beng2:~# - beng2 has pci-pt of Shiner T adapter and was netbooted via virtual ethernet interface(eth0) - beng2 IP was configured at eth0 via dhcp and was fine working. - When I tried to configure IP over shiner T adapter's interface, I can configure IP over eth3(link detected is yes) Logs: root@beng2:~# ifconfig -a eth0 Link encap:Ethernet HWaddr 52:54:00:25:6c:f0 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:21 eth3 Link encap:Ethernet HWaddr 40:f2:e9:31:15:e1 inet addr:10.33.33.1 Bcast:10.33.255.255 Mask:255.255.0.0 inet6 addr: fe80::42f2:e9ff:fe31:15e1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:1600 (1.6 KB) Interrupt:17 Memory:1012180-10121ff eth4 Link encap:Ethernet HWaddr 40:f2:e9:31:15:e0 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 Memory:1012000-101207f loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:49 errors:0 dropped:0 overruns:0 frame:0 TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4182 (4.1 KB) TX bytes:4182 (4.1 KB) root@beng2:~# ethtool eth3 Settings for eth3: Supported ports: [ TP ] Supported link modes: 100baseT/Half 100baseT/Full 1000baseT/Full 1baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Advertised link modes: 100baseT/Half 100baseT/Full 1000baseT/Full 1baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Link partner advertised link modes: 100baseT/Half 100baseT/Full 1000baseT/Full 1baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Speed: 1Mb/s Duplex: Full Port: Twisted Pair PHYAD: 17 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x (0) Link detected: yes root@beng2:~# - But it hangs when I try to ping network or ping fails with error message "destination host unreachable) though the gateway has been added. root@beng2:~# ping -I eth3 kte ^C root@beng2:~# root@beng2:~# ping -I eth3 10.33.0.1 PING 10.33.0.1 (10.33.0.1) from 10.33.33.1 eth3: 56(84) bytes of data. >From 10.33.33.1 icmp_seq=1 Destination Host Unreachable >From 10.33.33.1 icmp_seq=2 Destination Host Unreachable >From 10.33.33.1 icmp_seq=3 Destination Host Unreachable ^C --- 10.33.0.1 ping statistics --- 5 packets transmitted, 0 received, +3 errors, 100% packet loss, time 4024ms pipe 3 root@beng2:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface 0.0.0.0 10.33.0.1 0.0.0.0 UG0 00 eth3 10.33.0.0 0.0.0.0 255.255.0.0 U 0 00 eth3 root@beng2:~# netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 10.33.0.1 0.0.0.0 UG0 0 0 eth3 10.33.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3 root@beng2:~# - The same issue is seen when I configured IP via dhcp or statically assigned IP over pci-pt shiner T adapter interface either. Logs: root@beng2:
[Kernel-packages] [Bug 1497966] Re: ISST-KVM:R3-0:Firestone:Ubuntu14043:beng2:Cannot reach network with Shiner T adapter
** Package changed: ubuntu => linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1497966 Title: ISST-KVM:R3-0:Firestone:Ubuntu14043:beng2:Cannot reach network with Shiner T adapter Status in linux package in Ubuntu: New Bug description: Problem Description: === - Ping hangs or throws error message "Destination Host Unreachable" when IP is configured over pci-pt Shiner T adapter interface either dhcp entry or assigning IP statically assigning IP. Steps to Reproduce: == - beng2 has been installed with daily build 20150914 Logs: root@beng2:~# uname -a Linux beng2 3.19.0-28-generic #30~14.04.1-Ubuntu SMP Tue Sep 1 09:32:56 UTC 2015 ppc64le ppc64le ppc64le GNU/Linux root@beng2:~# - beng2 has pci-pt of Shiner T adapter and was netbooted via virtual ethernet interface(eth0) - beng2 IP was configured at eth0 via dhcp and was fine working. - When I tried to configure IP over shiner T adapter's interface, I can configure IP over eth3(link detected is yes) Logs: root@beng2:~# ifconfig -a eth0 Link encap:Ethernet HWaddr 52:54:00:25:6c:f0 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:21 eth3 Link encap:Ethernet HWaddr 40:f2:e9:31:15:e1 inet addr:10.33.33.1 Bcast:10.33.255.255 Mask:255.255.0.0 inet6 addr: fe80::42f2:e9ff:fe31:15e1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:1600 (1.6 KB) Interrupt:17 Memory:1012180-10121ff eth4 Link encap:Ethernet HWaddr 40:f2:e9:31:15:e0 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 Memory:1012000-101207f loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:49 errors:0 dropped:0 overruns:0 frame:0 TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4182 (4.1 KB) TX bytes:4182 (4.1 KB) root@beng2:~# ethtool eth3 Settings for eth3: Supported ports: [ TP ] Supported link modes: 100baseT/Half 100baseT/Full 1000baseT/Full 1baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Advertised link modes: 100baseT/Half 100baseT/Full 1000baseT/Full 1baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Link partner advertised link modes: 100baseT/Half 100baseT/Full 1000baseT/Full 1baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Speed: 1Mb/s Duplex: Full Port: Twisted Pair PHYAD: 17 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x (0) Link detected: yes root@beng2:~# - But it hangs when I try to ping network or ping fails with error message "destination host unreachable) though the gateway has been added. root@beng2:~# ping -I eth3 kte ^C root@beng2:~# root@beng2:~# ping -I eth3 10.33.0.1 PING 10.33.0.1 (10.33.0.1) from 10.33.33.1 eth3: 56(84) bytes of data. From 10.33.33.1 icmp_seq=1 Destination Host Unreachable From 10.33.33.1 icmp_seq=2 Destination Host Unreachable From 10.33.33.1 icmp_seq=3 Destination Host Unreachable ^C --- 10.33.0.1 ping statistics --- 5 packets transmitted, 0 received, +3 errors, 100% packet loss, time 4024ms pipe 3 root@beng2:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface 0.0.0.0 10.33.0.1 0.0.0.0 UG0 00 eth3 10.33.0.0
[Kernel-packages] [Bug 1500751] Re: Cryptsetup Keyboard not working on Xubuntu 3.19.0-30
I built the next test kernel, up to the following commit: 4b630e4e471c138161ab053471d97b0cdd367a31 The test kernel can be downloaded from: http://kernel.ubuntu.com/~jsalisbury/lp1500751 Can you test that kernel and report back if it has the bug or not? I will build the next test kernel based on your test results. Thanks in advance -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500751 Title: Cryptsetup Keyboard not working on Xubuntu 3.19.0-30 Status in cryptsetup package in Ubuntu: Invalid Status in linux package in Ubuntu: In Progress Bug description: I am running Xubuntu 15.04 and just upgraded to the latest kernel (3.19.0-30). After upgrading the boot time is longer (what is negligible) but the more severe error is, that I cannot enter my passphrase when I see the crypt dialog. I just see the dialog to enter my passphrase, but when I try to enter it, nothing appears in the textfield. I tried with the builtin laptop keyboard but also with an external USB keyboard. I thought about supplying more information, but things like the syslog are not helping apparently (I was not able to boot until the syslog would capture information...). If you need anything I can provide, I gladly help. [Test case] 1. On an affected system boot into kernel 3.19.0-30 [Solution] The "solution" for now is booting the older Kernel 3.19.0-28 (which isn't a real solution). PS.: Bugs like the following are either not applicable or the solution is not working for me: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/229732 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1359689 https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1238194 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cryptsetup/+bug/1500751/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
Re: [Kernel-packages] [Bug 1497494] Re: package linux-image-extra-3.13.0-54-generic 3.13.0-54.91 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1
Dear Mr. Salisbury, True problem I'm having: Kubuntu default install makes the /boot partition TOO SMALL. My Kubuntu /boot partition is only 243MiB. This was the default Kubuntu install. The /boot partition is too small. Now, the Kubuntu "Software Updater" demands 403M free space. Below is quoted from an email I sent to another about the problem: BEGIN QUOTE "2) Ran Software Updater; Selected "Partial Update" as a message indicated a full update wouldn't work because of partial install problem; Received error message demanding 403 M of free space on the disk /boot: "Not enough free disk space" "The upgrade has aborted. The upgrade needs a total of 403 M free space on disk '/boot'. Please free at least an additional 337 M of disk space on '/boot'. Empty your trash and remove temporary packages of former installations using 'sudo apt-get clean'." The Partial updater wants "403 M" free space in /Boot. Is that 403 MB? The root /boot folder is only a folder of 3.1kB, but it contains files of 12.6kB, etc. ??? Question: what does 403 M mean? 403,000 ??? ___ 3) Launched KDE Partition Manager: requires pwrd: It states that the Partition= /dev/sda1/, Type= ext2, Mount Point= /boot, Size= 243.00 MiB, Used= 159.64 MiB, Flags= boot therefore has free space of (243.00 - 159.64) = 83.36 MiB. If per the error message, we add 337 M = 420.36 MiB ??? ___ 4) In other words, the /boot partition at 243.00 MiB is too small for updates even if empty??? END QUOTE Thank you very much. Tom Turner On Mon, Sep 21, 2015 at 2:46 PM, Joseph Salisbury < joseph.salisb...@canonical.com> wrote: > ** Changed in: linux (Ubuntu) >Importance: Undecided => Medium > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1497494 > > Title: > package linux-image-extra-3.13.0-54-generic 3.13.0-54.91 failed to > install/upgrade: run-parts: /etc/kernel/postinst.d/initramfs-tools > exited with return code 1 > > Status in linux package in Ubuntu: > Confirmed > > Bug description: > >My /boot partition is full because it contains partially installed > versions of linux. I have been using > == sudo apt-get update ; > == sudo-apt-get upgrade . > >Those need to be updated to delete old versions of Linux when > installing a new one. At least they could ask the user what to do. In the > future I will use: > == sudo apt-get autoclean > == sudo apt-get clean > == sudo apt-get autoremove > == sudo apt-get update > == sudo apt-get upgrade -f > == sudo apt-get autoclean > == sudo apt-get clean > == sudo apt-get autoremove > >In the meantime, I cannot install new software that uses the /boot > partition. Linux isn't ready for prime time. It shoots itself in the foot. > > ProblemType: Package > DistroRelease: Ubuntu 14.04 > Package: linux-image-extra-3.13.0-54-generic 3.13.0-54.91 > ProcVersionSignature: Ubuntu 3.13.0-48.80-generic 3.13.11-ckt16 > Uname: Linux 3.13.0-48-generic x86_64 > ApportVersion: 2.14.1-0ubuntu3.8 > Architecture: amd64 > AudioDevicesInUse: >USERPID ACCESS COMMAND >/dev/snd/controlC0: lightdm1753 F pulseaudio > rusty 2305 F pulseaudio > Date: Fri Sep 18 18:59:54 2015 > DuplicateSignature: > package:linux-image-extra-3.13.0-54-generic:3.13.0-54.91:run-parts: > /etc/kernel/postinst.d/initramfs-tools exited with return code 1 > ErrorMessage: subprocess installed post-removal script returned error > exit status 1 > HibernationDevice: RESUME=UUID=e0431ec2-ad1c-49a4-9c1c-8f751a6b06dd > InstallationDate: Installed on 2014-12-06 (286 days ago) > InstallationMedia: Kubuntu 14.04 LTS "Trusty Tahr" - Release amd64 > (20140416.1) > MachineType: Dell Inc. Latitude D620 > PccardctlIdent: >Socket 0: > no product info available > PccardctlStatus: >Socket 0: > no card > ProcFB: 0 inteldrmfb > ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-48-generic > root=/dev/mapper/kubuntu--vg-root ro quiet splash vt.handoff=7 > PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No > PulseAudio daemon running, or not running as session daemon. > RelatedPackageVersions: grub-pc 2.02~beta2-9ubuntu1 > SourcePackage: linux > Title: package linux-image-extra-3.13.0-54-generic 3.13.0-54.91 failed > to install/upgrade: run-parts: /etc/kernel/postinst.d/initramfs-tools > exited with return code 1 > UpgradeStatus: No upgrade log present (probably fresh install) > WifiSyslog: >Sep 18 16:47:10 rusty-Latitude-D620 kernel: [ 2078.698396] perf samples > too long (2524 > 2500), lowering kernel.perf_event_max_sample_rate to 5 >Sep 18 17:35:56 rusty-Latitude-D620 kernel: [ 5004.337460] perf samples > too long (5017 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 >Sep 18 18:57:50 rusty-Latitude-D620 NetworkManager[935]: kernel > firmware directory '/lib/firmware' changed > dmi.bios.date:
[Kernel-packages] [Bug 1503239] Re: linux-lts-utopic: 3.16.0-51.68~14.04.1 -proposed tracker
** Changed in: kernel-sru-workflow/prepare-package-signed Status: New => Fix Released ** Changed in: kernel-sru-workflow/prepare-package-signed Assignee: Canonical Kernel Team (canonical-kernel-team) => Luis Henriques (henrix) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-utopic in Ubuntu. https://bugs.launchpad.net/bugs/1503239 Title: linux-lts-utopic: 3.16.0-51.68~14.04.1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: New Status in Kernel SRU Workflow certification-testing series: New Status in Kernel SRU Workflow prepare-package series: New Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: New Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: New Status in Kernel SRU Workflow security-signoff series: New Status in Kernel SRU Workflow verification-testing series: New Status in linux-lts-utopic package in Ubuntu: Invalid Status in linux-lts-utopic source package in Trusty: New Bug description: This bug is for tracking the 3.16.0-51.68~14.04.1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 06. October 2015 11:00 UTC kernel-stable-phase:Prepare kernel-stable-phase-changed:Tuesday, 06. October 2015 11:00 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1503239/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1495983] Re: [Hyper-V] kernel panic occurs when installing Ubuntu Server 15.10 x32
The original patch is already in Trusty as the following commit: commit 97b2591fbecaa0366939bb5fdfecd79fe914de22 Author: K. Y. Srinivasan Date: Fri Mar 27 00:27:20 2015 -0700 scsi: storvsc: Set the tablesize based on the information given by the host It was added to Trusty in the 3.13.0-60 kernel: git describe --contains 97b2591 Ubuntu-3.13.0-60.99~189 The define for MAX_PAGE_BUFFER_COUNT is in include/linux/hyperv.h : #define MAX_PAGE_BUFFER_COUNT 32 #define MAX_MULTIPAGE_BUFFER_COUNT 32 /* 128K */ -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1495983 Title: [Hyper-V] kernel panic occurs when installing Ubuntu Server 15.10 x32 Status in linux package in Ubuntu: In Progress Status in linux source package in Trusty: Incomplete Status in linux source package in Vivid: Incomplete Status in linux source package in Wily: In Progress Bug description: Attempting to install the latest build of Ubuntu Server 15.10 (Wily Werewolf) x32 on Hyper-V, after beginning installation a kernel panic occurs. The console log from the serial output is attached. http://cdimage.ubuntu.com/ubuntu-server/daily/current/ I tried with the builds from 14th and 15th of September with the same result. This bug does not affect x64 builds. Tried to start the installation with different resources with no effect, kernel panic always occurs no matter the VM settings. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1495983/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1501876] Re: Cisco Linksys AE1000 rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0500 with error -71
I ran into the same issue with the latest mainline kernel 4.3.0-040300rc3-generic. ** Tags added: kernel-bug-exists-upstream kernel-bug-exists- upstream-4.3.0-040300rc3 kernel-bug-exists-upstream-kernel-bug-exists- upstream ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1501876 Title: Cisco Linksys AE1000 rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0500 with error -71 Status in linux package in Ubuntu: Confirmed Bug description: On the University of Maryland College Park Campus I am experiencing wifi connectivity issues where I get an initial connection, but it will drop frequently and have difficulty reconnecting to this secured wifi. This is at multiple locations on campus, but not off campus that I've found at this time. My Android Phone and Tablet do not have wifi issues connecting. Today I tried to work around the build in WiFi by adding the USB adapter Linksys AE1000. It was working for a while until it lost connection like the build in wifi on this laptop. After the loss of connection I saw a repeated: ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x0500, value=0x8804 ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0500 with error -71 Before the wifi connection loss I saw repeated: ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-30-generic 3.19.0-30.33 ProcVersionSignature: Ubuntu 3.19.0-30.33-generic 3.19.8-ckt6 Uname: Linux 3.19.0-30-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: jonathan 2145 F pulseaudio /dev/snd/controlC0: jonathan 2145 F pulseaudio CurrentDesktop: Unity Date: Thu Oct 1 15:10:34 2015 EcryptfsInUse: Yes InstallationDate: Installed on 2015-01-29 (244 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20141015) MachineType: Hewlett-Packard HP ENVY TS 15 Notebook PC ProcFB: 0 radeondrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-30-generic.efi.signed root=UUID=1cc26cb0-3476-4abf-a12e-acac53ba8537 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.19.0-30-generic N/A linux-backports-modules-3.19.0-30-generic N/A linux-firmware 1.143.3 SourcePackage: linux UpgradeStatus: Upgraded to vivid on 2015-04-06 (177 days ago) dmi.bios.date: 01/26/2015 dmi.bios.vendor: Insyde dmi.bios.version: F.19 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 198A dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 03.14 dmi.chassis.asset.tag: 5CG32129MN dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.19:bd01/26/2015:svnHewlett-Packard:pnHPENVYTS15NotebookPC:pvr088810305B032:rvnHewlett-Packard:rn198A:rvrKBCVersion03.14:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP ENVY TS 15 Notebook PC dmi.product.version: 088810305B032 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1501876/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1502946] Re: kernel crash on m400 arm64 server cartridge
Can you see if the crash still occurs if you boot with the 4.2.0-12.14 kernel? It can be downloaded from: https://launchpad.net/ubuntu/+source/linux/4.2.0-12.14 ** Tags added: kernel-key -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1502946 Title: kernel crash on m400 arm64 server cartridge Status in linux package in Ubuntu: Confirmed Bug description: We've made some progress on bug 1499869 , such that on Friday I actually had successful installs. An attempt at an install today shows a kernel stack trace early in the boot, then the initramfs not finding any network devices and thus failing to mount the iscsi root. The trace looks like this: [0.00] [ cut here ] [0.00] WARNING: CPU: 0 PID: 0 at /build/linux-Nwr5zx/linux-4.2.0/arch/arm64/mm/numa.c:449 numa_init+0x90/0x398() [0.00] Modules linked in: [0.00] CPU: 0 PID: 0 Comm: swapper Not tainted 4.2.0-14-generic #16-Ubuntu [0.00] Hardware name: HP ProLiant m400 Server Cartridge (DT) [0.00] Call trace: [0.00] [] dump_backtrace+0x0/0x150 [0.00] [] show_stack+0x20/0x30 [0.00] [] dump_stack+0x7c/0x98 [0.00] [] warn_slowpath_common+0xa0/0xe0 [0.00] [] warn_slowpath_null+0x38/0x50 [0.00] [] numa_init+0x8c/0x398 [0.00] [] arm64_numa_init+0x30/0x40 [0.00] [] bootmem_init+0x60/0x104 [0.00] [] paging_init+0x198/0x224 [0.00] [] setup_arch+0x274/0x5f8 [0.00] [] start_kernel+0xdc/0x3f4 [0.00] ---[ end trace f24b6c88ae00fa9a ]--- --- AlsaDevices: Error: command ['ls', '-l', '/dev/snd/'] failed with exit code 2: ls: cannot access /dev/snd/: No such file or directory AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.15 Architecture: arm64 ArecordDevices: Error: [Errno 2] No such file or directory CRDA: Error: [Errno 2] No such file or directory CurrentDmesg: [ 33.356615] init: plymouth-upstart-bridge main process ended, respawning DistroRelease: Ubuntu 14.04 IwConfig: lono wireless extensions. eth1 no wireless extensions. eth0 no wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: console=ttyS0,9600n8r ro ProcVersionSignature: User Name 3.13.0-63.103-generic 3.13.11-ckt25 RelatedPackageVersions: linux-restricted-modules-3.13.0-63-generic N/A linux-backports-modules-3.13.0-63-generic N/A linux-firmware 1.127.15 RfKill: Error: [Errno 2] No such file or directory Tags: trusty uec-images Uname: Linux 3.13.0-63-generic aarch64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dialout dip floppy netdev plugdev sudo video _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1502946/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503399] [NEW] Fn+F2 is not working for activating/deactivating wifi.
Public bug reported: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1277959 Solved thanks to: http://ubuntuforums.org/showthread.php?t=2181558 ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-15-generic 3.19.0-15.15 [modified: boot/vmlinuz-3.19.0-15-generic] ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xoran 1252 F pulseaudio /dev/snd/pcmC1D0p: xoran 1252 F...m pulseaudio /dev/snd/controlC1: xoran 1252 F pulseaudio CurrentDesktop: Unity Date: Tue Oct 6 19:21:32 2015 HibernationDevice: RESUME=UUID=cecf930e-9733-4ea4-9069-7fb8bde50e0b InstallationDate: Installed on 2015-10-05 (0 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. B451JA ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-15-generic root=UUID=2d9badae-0172-4d9d-bd19-8e3bcafd55ad ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.19.0-15-generic N/A linux-backports-modules-3.19.0-15-generic N/A linux-firmware 1.143 SourcePackage: linux UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/06/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: B451JA.204 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: B451JA dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrB451JA.204:bd10/06/2014:svnASUSTeKCOMPUTERINC.:pnB451JA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnB451JA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: B451JA dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-bug vivid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1503399 Title: Fn+F2 is not working for activating/deactivating wifi. Status in linux package in Ubuntu: Confirmed Bug description: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1277959 Solved thanks to: http://ubuntuforums.org/showthread.php?t=2181558 ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-15-generic 3.19.0-15.15 [modified: boot/vmlinuz-3.19.0-15-generic] ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xoran 1252 F pulseaudio /dev/snd/pcmC1D0p: xoran 1252 F...m pulseaudio /dev/snd/controlC1: xoran 1252 F pulseaudio CurrentDesktop: Unity Date: Tue Oct 6 19:21:32 2015 HibernationDevice: RESUME=UUID=cecf930e-9733-4ea4-9069-7fb8bde50e0b InstallationDate: Installed on 2015-10-05 (0 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. B451JA ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-15-generic root=UUID=2d9badae-0172-4d9d-bd19-8e3bcafd55ad ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.19.0-15-generic N/A linux-backports-modules-3.19.0-15-generic N/A linux-firmware 1.143 SourcePackage: linux UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/06/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: B451JA.204 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: B451JA dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrB451JA.204:bd10/06/2014:svnASUSTeKCOMPUTERINC.:pnB451JA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnB451JA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: B451JA dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1503399/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503399] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1503399 Title: Fn+F2 is not working for activating/deactivating wifi. Status in linux package in Ubuntu: Confirmed Bug description: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1277959 Solved thanks to: http://ubuntuforums.org/showthread.php?t=2181558 ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-15-generic 3.19.0-15.15 [modified: boot/vmlinuz-3.19.0-15-generic] ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xoran 1252 F pulseaudio /dev/snd/pcmC1D0p: xoran 1252 F...m pulseaudio /dev/snd/controlC1: xoran 1252 F pulseaudio CurrentDesktop: Unity Date: Tue Oct 6 19:21:32 2015 HibernationDevice: RESUME=UUID=cecf930e-9733-4ea4-9069-7fb8bde50e0b InstallationDate: Installed on 2015-10-05 (0 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. B451JA ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-15-generic root=UUID=2d9badae-0172-4d9d-bd19-8e3bcafd55ad ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.19.0-15-generic N/A linux-backports-modules-3.19.0-15-generic N/A linux-firmware 1.143 SourcePackage: linux UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/06/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: B451JA.204 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: B451JA dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrB451JA.204:bd10/06/2014:svnASUSTeKCOMPUTERINC.:pnB451JA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnB451JA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: B451JA dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1503399/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1502946] Re: kernel crash on m400 arm64 server cartridge
The crash does not reproduce when running with kernel 4.2.0-12.14 . -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1502946 Title: kernel crash on m400 arm64 server cartridge Status in linux package in Ubuntu: Confirmed Bug description: We've made some progress on bug 1499869 , such that on Friday I actually had successful installs. An attempt at an install today shows a kernel stack trace early in the boot, then the initramfs not finding any network devices and thus failing to mount the iscsi root. The trace looks like this: [0.00] [ cut here ] [0.00] WARNING: CPU: 0 PID: 0 at /build/linux-Nwr5zx/linux-4.2.0/arch/arm64/mm/numa.c:449 numa_init+0x90/0x398() [0.00] Modules linked in: [0.00] CPU: 0 PID: 0 Comm: swapper Not tainted 4.2.0-14-generic #16-Ubuntu [0.00] Hardware name: HP ProLiant m400 Server Cartridge (DT) [0.00] Call trace: [0.00] [] dump_backtrace+0x0/0x150 [0.00] [] show_stack+0x20/0x30 [0.00] [] dump_stack+0x7c/0x98 [0.00] [] warn_slowpath_common+0xa0/0xe0 [0.00] [] warn_slowpath_null+0x38/0x50 [0.00] [] numa_init+0x8c/0x398 [0.00] [] arm64_numa_init+0x30/0x40 [0.00] [] bootmem_init+0x60/0x104 [0.00] [] paging_init+0x198/0x224 [0.00] [] setup_arch+0x274/0x5f8 [0.00] [] start_kernel+0xdc/0x3f4 [0.00] ---[ end trace f24b6c88ae00fa9a ]--- --- AlsaDevices: Error: command ['ls', '-l', '/dev/snd/'] failed with exit code 2: ls: cannot access /dev/snd/: No such file or directory AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.15 Architecture: arm64 ArecordDevices: Error: [Errno 2] No such file or directory CRDA: Error: [Errno 2] No such file or directory CurrentDmesg: [ 33.356615] init: plymouth-upstart-bridge main process ended, respawning DistroRelease: Ubuntu 14.04 IwConfig: lono wireless extensions. eth1 no wireless extensions. eth0 no wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: console=ttyS0,9600n8r ro ProcVersionSignature: User Name 3.13.0-63.103-generic 3.13.11-ckt25 RelatedPackageVersions: linux-restricted-modules-3.13.0-63-generic N/A linux-backports-modules-3.13.0-63-generic N/A linux-firmware 1.127.15 RfKill: Error: [Errno 2] No such file or directory Tags: trusty uec-images Uname: Linux 3.13.0-63-generic aarch64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dialout dip floppy netdev plugdev sudo video _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1502946/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1500751] Re: Cryptsetup Keyboard not working on Xubuntu 3.19.0-30
I am able to enter my passphrase (asterisks appear, boot continues on "enter") on 3.19.0-29-generic #31~lp1500751Commit4b630e4e on my Dell Latitude E7250. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1500751 Title: Cryptsetup Keyboard not working on Xubuntu 3.19.0-30 Status in cryptsetup package in Ubuntu: Invalid Status in linux package in Ubuntu: In Progress Bug description: I am running Xubuntu 15.04 and just upgraded to the latest kernel (3.19.0-30). After upgrading the boot time is longer (what is negligible) but the more severe error is, that I cannot enter my passphrase when I see the crypt dialog. I just see the dialog to enter my passphrase, but when I try to enter it, nothing appears in the textfield. I tried with the builtin laptop keyboard but also with an external USB keyboard. I thought about supplying more information, but things like the syslog are not helping apparently (I was not able to boot until the syslog would capture information...). If you need anything I can provide, I gladly help. [Test case] 1. On an affected system boot into kernel 3.19.0-30 [Solution] The "solution" for now is booting the older Kernel 3.19.0-28 (which isn't a real solution). PS.: Bugs like the following are either not applicable or the solution is not working for me: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/229732 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1359689 https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1238194 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cryptsetup/+bug/1500751/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503016] Re: linux: 4.2.0-15.17 -proposed tracker
** Changed in: kernel-development-workflow/promote-to-proposed Status: New => Fix Released ** Description changed: This bug is for tracking the 4.2.0-15.17 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-Prepare-package-start:Monday, 05. October 2015 19:36 UTC kernel-phase-changed:Monday, 05. October 2015 19:36 UTC kernel-phase:Prepare kernel-stable-Promote-to-proposed-end:Monday, 05. October 2015 20:00 UTC + proposed-announcement-sent:True -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1503016 Title: linux: 4.2.0-15.17 -proposed tracker Status in Kernel Development Workflow: In Progress Status in Kernel Development Workflow automated-testing series: New Status in Kernel Development Workflow prepare-package series: New Status in Kernel Development Workflow prepare-package-meta series: New Status in Kernel Development Workflow prepare-package-signed series: New Status in Kernel Development Workflow promote-to-proposed series: Fix Released Status in Kernel Development Workflow promote-to-release series: New Status in linux package in Ubuntu: Invalid Status in linux source package in Wily: Invalid Bug description: This bug is for tracking the 4.2.0-15.17 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-Prepare-package-start:Monday, 05. October 2015 19:36 UTC kernel-phase-changed:Monday, 05. October 2015 19:36 UTC kernel-phase:Prepare kernel-stable-Promote-to-proposed-end:Monday, 05. October 2015 20:00 UTC proposed-announcement-sent:True To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-development-workflow/+bug/1503016/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1503218] Re: debian-installer: review our d-i config in relation to generated modules
I've been thinking about writing a script that grovels all of the module files in the ABI directory to check for superfluous module names in d-i as well as missing dependencies. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1503218 Title: debian-installer: review our d-i config in relation to generated modules Status in linux package in Ubuntu: Triaged Bug description: We have not recently reviewed the modules included in the d-i udebs. Review them. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1503218/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1502946] Re: kernel crash on m400 arm64 server cartridge
Craig - shall I revert the arm64 NUMA patches ? ** Also affects: linux (Ubuntu Wily) Importance: Critical Status: Confirmed ** Changed in: linux (Ubuntu Wily) Status: Confirmed => In Progress ** Changed in: linux (Ubuntu Wily) Assignee: (unassigned) => Tim Gardner (timg-tpi) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1502946 Title: kernel crash on m400 arm64 server cartridge Status in linux package in Ubuntu: In Progress Status in linux source package in Wily: In Progress Bug description: We've made some progress on bug 1499869 , such that on Friday I actually had successful installs. An attempt at an install today shows a kernel stack trace early in the boot, then the initramfs not finding any network devices and thus failing to mount the iscsi root. The trace looks like this: [0.00] [ cut here ] [0.00] WARNING: CPU: 0 PID: 0 at /build/linux-Nwr5zx/linux-4.2.0/arch/arm64/mm/numa.c:449 numa_init+0x90/0x398() [0.00] Modules linked in: [0.00] CPU: 0 PID: 0 Comm: swapper Not tainted 4.2.0-14-generic #16-Ubuntu [0.00] Hardware name: HP ProLiant m400 Server Cartridge (DT) [0.00] Call trace: [0.00] [] dump_backtrace+0x0/0x150 [0.00] [] show_stack+0x20/0x30 [0.00] [] dump_stack+0x7c/0x98 [0.00] [] warn_slowpath_common+0xa0/0xe0 [0.00] [] warn_slowpath_null+0x38/0x50 [0.00] [] numa_init+0x8c/0x398 [0.00] [] arm64_numa_init+0x30/0x40 [0.00] [] bootmem_init+0x60/0x104 [0.00] [] paging_init+0x198/0x224 [0.00] [] setup_arch+0x274/0x5f8 [0.00] [] start_kernel+0xdc/0x3f4 [0.00] ---[ end trace f24b6c88ae00fa9a ]--- --- AlsaDevices: Error: command ['ls', '-l', '/dev/snd/'] failed with exit code 2: ls: cannot access /dev/snd/: No such file or directory AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.15 Architecture: arm64 ArecordDevices: Error: [Errno 2] No such file or directory CRDA: Error: [Errno 2] No such file or directory CurrentDmesg: [ 33.356615] init: plymouth-upstart-bridge main process ended, respawning DistroRelease: Ubuntu 14.04 IwConfig: lono wireless extensions. eth1 no wireless extensions. eth0 no wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: console=ttyS0,9600n8r ro ProcVersionSignature: User Name 3.13.0-63.103-generic 3.13.11-ckt25 RelatedPackageVersions: linux-restricted-modules-3.13.0-63-generic N/A linux-backports-modules-3.13.0-63-generic N/A linux-firmware 1.127.15 RfKill: Error: [Errno 2] No such file or directory Tags: trusty uec-images Uname: Linux 3.13.0-63-generic aarch64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dialout dip floppy netdev plugdev sudo video _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1502946/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
