Bug#385531: marked as done (Package: installation-reports)
Your message dated Sat, 23 Jun 2007 09:11:59 +0200 with message-id <[EMAIL PROTECTED]> and subject line Bug#385531: Package: installation-reports has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) --- Begin Message --- Package: installation-reports Boot method: CD Image version: etch beta 3, 2006/08/30, FH Esslingen Date: 2006/08/30 Machine: MEDION Processor: PIV 630, 3.2GHz Memory: 1G Partitions: FilesystemType 1K-blocks Used Available Use% Mounted on /dev/sdb3 reiserfs 3992000 2290988 1701012 58% / tmpfstmpfs 518048 0518048 0% /dev/shm /dev/sdb4 reiserfs 6048256 32840 6015416 1% /home tmpfstmpfs 10240 196 10044 2% /dev Output of lspci and lspci -n: see attachments Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network:[O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system:[O] Install boot loader: [O] Reboot: [E ] Comments/Problems: reboot: X does not start: Problem with recognising graphics adapter, see attached Xorg logfile During primary installation the GUI worked fine. Under WinXP graphics adapter is shown as MEDION RADEON X740XL + MEDION RADEON X740XL secondary on PCI 1:0:0 and 1:0:1 resp. According to Xorg.0.log, DEBIAN probes an ATI RADEON X700 PRO (lines 113,114) but in the end it tests for MACH64 (line 447)and doesn't recognise the secondary as a graphics adapter (line 448) Loading the ati driver is logged in lines 306 ff. Without X the base system doesn't even provide a browser that could be used for searching help. -- === Erhard Sailer Kantstr. 19 D-71229 Leonberg === 00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Express Memory Controller Hub (rev 04) 00:01.0 PCI bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Express PCI Express Root Port (rev 04) 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc RV410 [Radeon X700 Pro (PCIE)] 01:00.1 Display controller: ATI Technologies Inc RV410 [Radeon X700 Pro (PCIE)] Secondary 03:01.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01) 03:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 03:04.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01) 03:05.0 Communication controller: Agere Systems V.92 56K WinModem (rev 03) 03:06.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 8b) 00:00.0 0600: 8086:2580 (rev 04) 00:01.0 0604: 8086:2581 (rev 04) 00:1b.0 0403: 8086:2668 (rev 03) 00:1c.0 0604: 8086:2660 (rev 03) 00:1d.0 0c03: 8086:2658 (rev 03) 00:1d.1 0c03: 8086:2659 (rev 03) 00:1d.2 0c03: 8086:265a (rev 03) 00:1d.3 0c03: 8086:265b (rev 03) 00:1d.7 0c03: 8086:265c (rev 03) 00:1e.0 0604: 8086:244e (rev d3) 00:1f.0 0601: 8086:2640 (rev 03) 00:1f.1 0101: 8086:266f (rev 03) 00:1f.2 0101: 8086:2651 (rev 03) 00:1f.3 0c05: 8086:266a (rev 03) 01:00.0 0300: 1002:5e4b 01:00.1 0380: 1002:5e6b 03:01.0 0480
Bug#420506: DRI fails
Hi, Could you try the latest xserver-xorg-video-intel (2:2.0.0-5 currently in experimental) and report back whether it works better? Your DRI problems apparently got solved by removing the VideoRAM line. The blue XV problem should be fixed by now. So what remains is the freeze when a game changes the resolution, and the drmWaitVBlank warning. The latest package has a good chance of fixing these too. Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#420610: Sorry, account expired.
Sorry, account expired. Please resend your e-mail to: mattia.list gmail com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#420712: xserver-xorg-video-intel does not show virtual screens
Hi, Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 currently in experimental) and report back whether it fixes your problem? Be sure you do not disable DDC as before since the driver needs it to autodetect modes. Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Processed: reassign 424899 to xserver-xorg-core
Processing commands for [EMAIL PROTECTED]: > # Automatically generated email from bts, devscripts version 2.10.4 > reassign 424899 xserver-xorg-core Bug#424899: crash on resume from sleep Bug reassigned from package `xserver-xorg-video-intel' to `xserver-xorg-core'. > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#399461: marked as done (Xorg i810 fatal error)
Your message dated Sat, 23 Jun 2007 09:06:31 +0200 with message-id <[EMAIL PROTECTED]> and subject line Bug#399461: Xorg i810 fatal error has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) --- Begin Message --- package: xserver-xorg-video-i810 version: 1.7.2-1 Symptom: When starting up, the Xserver bombs out with the following message in the Xorg.0.log file: "Fatal server error: Active ring not flushed." Hardware (lspci -vv): 00:02.0 VGA compatible controller: Intel Corporation 82815 CGC \ [Chipset Graphics Controller] (rev 02) (prog-if 00 [VGA]) Subsystem: Compaq Computer Corporation Unknown device 001a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- \ ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- \ SERR- http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 12 15:46:12 2006 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Generic Monitor" (**) | |-->Device "Generic Video Card" (**) |-->Input Device "Generic Keyboard" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc104" (**) XKB: model: "pc104" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Configured Mouse" (**) |-->Input Device "Generic Mouse" (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/Type1". Entry deleted from font path. (Run 'mkfontdir' on "/usr/share/fonts/X11/Type1"). (WW) The directory "/usr/share/fonts/X11/CID" does not exist. Entry deleted from font path. (WW) The directory "/usr/lib/X11/fonts/CID" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (WW) `fonts.dir' not found (or not valid) in "/usr/lib/X11/fonts/100dpi". Entry deleted from font path. (Run 'mkfontdir' on "/usr/lib/X11/fonts/100dpi"). (WW) `fonts.dir' not found (or not valid) in "/usr/lib/X11/fonts/75dpi". Entry deleted from font path. (Run 'mkfontdir' on "/usr/lib/X11/fonts/75dpi"). (**) FontPath set to: unix/:7100, /usr/lib/X11/fonts/Type1, /usr/lib/X11/fonts/Speedo, /usr/share/fonts/X11/misc, /usr/lib/X11/fonts/misc, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi (==) RgbPath set to "/etc/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (**) Ignoring ABI Version (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1130 card , rev 02 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,1132 card 0e11,001a rev 02 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev 01 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2440 card , rev 01 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,244b card 8086,2411 rev 01 class 01,01,80 hdr 00 (II) PCI: 00:1f:4: chip 8086,2444 card 8086,2411 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2445 card 0e11,000f rev 01 class 04,01,00 hdr 00 (II) PCI: 02:08:0:
Bug#418256: screen stays black after resume, workaround is to switch to console and back
Hi Erich, Do you still reproduce this problem with a black screen after suspend/resume with the latest xserver-xorg-video-intel driver? If so, it would be good if all of you could try with the latest xserver-xorg-video-intel driver (2:2.0.0-5 currently in experimental). If you still experience a black screen at resume, you should try either passing acpi_sleep=s3_bios to the kernel, or use vbetool post after resume (some high-level suspending program can take care of this for you, for instance with the uswsusp package). Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#420350: xserver-xorg-video-intel: Black screen (powered off) with new driver
Hi, Could you try the latest xserver-xorg-video-driver (2:2.0.0-5 in experimental) and report back whether it works better? It contains a recent git snapshot of the driver. Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#390913: xserver-xorg-video-i810: blank screen after suspend
Hi, I am contacting all of you again since everybody does not agree whether this bug is fixed or not. It could be related to which chipset you have. It would be good if all of you could try with the latest xserver-xorg-video-intel driver (2:2.0.0-5 currently in experimental). It is supposed to resume well. If you still experience a black screen at resume, you should try either passing acpi_sleep=s3_bios to the kernel, or use vbetool post after resume (some high-level suspending program can take care of this for you, for instance with the uswsusp package). Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#406028: xserver-xorg-video-i810: screen corrupted, pointer missing.
Hi, Does any of you guys still reproduce this problem with a black screen after suspend/resume with the latest xserver-xorg-video-intel driver? If so, it would be good if all of you could try with the latest xserver-xorg-video-intel driver (2:2.0.0-5 currently in experimental). If you still experience a black screen at resume, you should try either passing acpi_sleep=s3_bios to the kernel, or use vbetool post after resume (some high-level suspending program can take care of this for you, for instance with the uswsusp package). Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#406417: i810: DualHead fails to resume after suspend
Hi, Does any of you guys still reproduce this problem with a black screen after suspend/resume with the latest xserver-xorg-video-intel driver in dual-head? If so, it would be good if all of you could try with the latest xserver-xorg-video-intel driver (2:2.0.0-5 currently in experimental). If you still experience a black screen at resume, you should try either passing acpi_sleep=s3_bios to the kernel, or use vbetool post after resume (some high-level suspending program can take care of this for you, for instance with the uswsusp package). Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#420610: xserver-xorg-video-i810: xorg unusable: starts with bad green screen and wrong resolution with 855GM
Hi, Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 currently in experimental) and report back whether it fixes your problem? The support for your i855 chipset has been greatly improved since your report with 2:2.0.0-1. Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#421614: xserver-xorg-video-intel: Some random corrupt bits appear with aterm, rxvt-unicode
Hi, Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 currently in experimental) and report back whether it fixes your problem? Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#423921: crash when starting xgalaga
Hi Joey, Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 currently in experimental) and report back whether it fixes this crash in xgalaga? Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#421476: xserver-xorg-video-intel: Hotkey switching to external VGA not possible, switching with i810switch/xrandr freezes system
Hi, Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 currently in experimental) and report back whether it fixes your problem? Note that xrandr is meant to switch displays on/off so it might be "expected" that hotkeys do not work anymore :) I don't know about i810switch, I would rather not use it since it might have been designed for old i810 driver and I don't know how it interacts with xrandr. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#428148: gxine crashes at startup with xserver-xorg-video-intel
Hi, Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 currently in experimental) and report back whether it fixes this crash of gxine? >From what I read, the problem only occurs when you use XAA with Composite? EXA has been designed towards compositing, so you'd rather not use XAA with Composite anyway. Also note that "XAANoOffscreenPixmaps" does not matter if you use EXA instead of XAA. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#427811: xserver-xorg-video-intel: Occassional hard freeze switching from graphics to text mode
Hi, Could you guys try the latest xserver-xorg-video-intel package (2:2.0.0-5 currently in experimental) and report back whether it fixes this occasional freeze when switching from X to VT console? Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#426564: xserver-xorg-video-intel: Crashes with signal 11 in experimental version
Hi, Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 currently in experimental) and report back whether it fixes your problem? If it does not, it would be good to catch a debugging backtrace with gdb. You'll have to install xserver-xorg-core and rebuild xserver-xorg-video-intel with debugging enabled (look at http://wiki.debian.org/HowToGetABacktrace). Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#425227: xserver-xorg-video-intel: no display with the intel or i810 driver, can only running the vesa driver
Hi, Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 currently in experimental) and report back whether it fixes your problem? Support for you i855 chipset have been greatly improved since 2:2.0.0-1. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#425451: Totem crashes when trying to play video
Hi, Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 currently in experimental) and report back whether it fixes your problem? Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#425882: xserver-xorg-video-i810: Out of video RAM with a 256 MB Intel GMA 950
Hi David, Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 currently in experimental) and report back whether it fixes this video memory problem? Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#424952: xserver-xorg-video-intel: crash when using new intel driver, i810 driver works fine
Hi, Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 currently in experimental) and report back whether it fixes your problem? Support for your old i845 chipset have been greatly improved since 2:2.0.0-1. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Processed: Bug#421150,xserver-xorg-video-intel: Display is extremely slow in any rotation
Processing commands for [EMAIL PROTECTED]: > forwarded 421150 https://bugs.freedesktop.org/show_bug.cgi?id=11186 Bug#421150: xserver-xorg-video-intel: Display is extremely slow in any rotation Noted your statement that Bug has been forwarded to https://bugs.freedesktop.org/show_bug.cgi?id=11186. > thank you Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#428796: i810 and X-server hard-lock
Hi Evgeniy, The invalid opcode error looks similar to the one in http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=404885. The guy is using the vesa driver. You might want to test with the vesa driver instead of i810 and see whether the same problem occurs (but you won't have accelerated 3D with vesa). If it still occurs, we'll have to reassign this bug to the server core instead of the i810 driver. About the i810 driver, it has been largely reworked since version 1.7. It is now superseded with the Intel driver 2.0 (xserver-xorg-video-intel). Its first release had multiple problems on your i855, but most of them are now fixed in the latest git snapshot of the driver. So, if you want to test it, you have to install xserver-xorg-core 1.3 (currently in testing) and xserver-xorg-video-intel 2:2.0.0-5 currently in experimental. All this will require to upgrade several packages such as the libc6. Also, since your attached file suggests that you might have been trying multiple heads in the past, you have to know that mode detection has been greatly improved in the new Xserver 1.3 and intel driver 2.0. Most of the stuff in xorg.conf to manage resolutions, modes and multiple heads is useless nowadays. You might want to look at section #6 and #7 of http://wiki.debian.org/XStrikeForce/ReleaseNotes to change your xorg.conf accordingly. Let me know if you need more help. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#421150: ,xserver-xorg-video-intel: Display is extremely slow in any rotation
forwarded 421150 https://bugs.freedesktop.org/show_bug.cgi?id=11186 thank you Hi Gunnar, Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 currently in experimental) and report back whether it fixes your slow rendering under rotation? The problem looks similar to the URL above. Feel free to add comments there if you think it may help. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#430159: compiz: black screen after resume from suspend to ram, intel graphic card
Christophe DURAND wrote: > So, i have nothing in /usr/share/bug/xserver-xorg/bug after resume, the > file doesn't exist. > Oops, sorry, my fault, it should have been /usr/share/bug/xserver-xorg/script 3>&1 Which xserver-xorg-video-intel do you have? The bug might well be caused by the driver instead of compiz. It might be good to try the latest xserver-xorg-video-intel currently in experimental (2:2.0.0-5). Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#425227: xserver-xorg-video-intel: no display with the intel or i810 driver, can only running the vesa driver
2:2.0.0-5 doesn't fix the problem here, no display, as always with the intel driver ,just black. Am Samstag, 23. Juni 2007 schrieb Brice Goglin: > Hi, > > Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 > currently in experimental) and report back whether it fixes your > problem? Support for you i855 chipset have been greatly improved since > 2:2.0.0-1. > > Brice -- Gruss Rainer Liebing Jun 23 11:47:34 CEST 2007 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#425227: xserver-xorg-video-intel: no display with the intel or i810 driver, can only running the vesa driver
Rainer Liebing wrote: > 2:2.0.0-5 doesn't fix > the problem here, > no display, as always with the intel driver ,just black. > Do you still get a usable display if you start X with startx /usr/bin/xterm as reported earlier? If so, what does xrandr says? The problem with a VGA display wrongly being detected should be fixed by now. So you should see only LVDS there. Try xrandr multiple times since this problem was intermittent. So "xrandr --output VGA --off --output LVDS --auto" should be useless now. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#420350: Still doesnt work
Hi, Ok what I did was. Removed i810, changed in xorg.conf from i810 to intel. Then apt-get -t experimental install xserver-xorg-video-intel which was 2.0.0-5 Did restart gdm. I got some errors. I also tried X -configure and X -config /root/Xorg.conf.new however I got the same errors as before. Here is the output. # X -config /root/xorg.conf.new _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/cannibal:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 X Window System Version 1.3.0 Release Date: 19 April 2007 X Protocol Version 11, Revision 0, Release 1.3 Build Operating System: Linux Debian Current Operating System: Linux cannibal 2.6.20.3 #1 Wed Mar 21 00:48:46 CET 2007 i686 Build Date: 01 June 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 23 12:09:47 2007 (++) Using config file: "/root/xorg.conf.new" (II) Module already built-in (II) Module already built-in (EE) intel(0): detecting sil164 (EE) intel(0): Unable to read from DVOI2C_E Slave 112. (EE) intel(0): Unable to read from DVOI2C_E Slave 236. (EE) intel(0): ivch: Unable to read register 0x00 from DVOI2C_B:04. (EE) intel(0): present: FALSE (9 of 39) at 498 desired 497 temp 1 (EE) intel(0): No valid modes. (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found It doesnt work with current Xorg.conf and the new one. So its probably not a settings problem. I am still working on old driver. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#420712: xserver-xorg-video-intel does not show virtual screens
Am Samstag, 23. Juni 2007 schrieb Brice Goglin: > Hi, > > Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 > currently in experimental) and report back whether it fixes your > problem? Be sure you do not disable DDC as before since the driver needs > it to autodetect modes. > > Thanks, > Brice Hi Brice, unfortunatelly the experimental driver doesn´t work, too. I can´t get the virtual screen size. I append xorg.conf and Xorg.0.log. Wolfgang -- Wolfgang Lauterbach Goethering 54 90547 Stein This is Linux country. If you listen carefully, you can hear Windows reboot... X Window System Version 1.3.0 Release Date: 19 April 2007 X Protocol Version 11, Revision 0, Release 1.3 Build Operating System: Linux Debian Current Operating System: Linux speedy 2.6.22-rc5 #1 Wed Jun 20 10:54:26 CEST 2007 i686 Build Date: 01 June 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 23 12:21:43 2007 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Standardbildschirm" (**) | |-->Device "Intel Corporation 82915G/GV/910GL Integrated Graphics Controller" (**) |-->Input Device "Generic Keyboard" (**) |-->Input Device "Configured Mouse" (WW) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) RgbPath set to "/etc/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Loader magic: 0x81e5f60 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.2 X.Org XInput driver : 0.7 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.2 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2580 card 1025,0063 rev 04 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2582 card 1025,0063 rev 04 class 03,00,00 hdr 00 (II) PCI: 00:1c:0: chip 8086,2660 card , rev 03 class 06,04,00 hdr 81 (II) PCI: 00:1c:1: chip 8086,2662 card , rev 03 class 06,04,00 hdr 81 (II) PCI: 00:1d:0: chip 8086,2658 card 1025,0063 rev 03 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,2659 card 1025,0063 rev 03 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,265a card 1025,0063 rev 03 class 0c,03,00 hdr 00 (II) PCI: 00:1d:3: chip 8086,265b card 1025,0063 rev 03 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,265c card 1025,0063 rev 03 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev d3 class 06,04,01 hdr 01 (II) PCI: 00:1f:0: chip 8086,2640 card 1025,0063 rev 03 class 06,01,00 hdr 80 (II) PCI: 00:1f:2: chip 8086,2651 card 1025,0063 rev 03 class 01,01,80 hdr 00 (II) PCI: 00:1f:3: chip 8086,266a card 1025,0063 rev 03 class 0c,05,00 hdr 00 (II) PCI: 01:00:0: chip 14e4,1677 card 1025,0063 rev 01 class 02,00,00 hdr 00 (II) PCI: 03:01:0: chip 1274,5880 card 1274,2000 rev 02 class 04,01,00 hdr 00 (II) PCI: End of PCI scan (II) Intel Bridge workaround enabled (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xfeb0 - 0xfebf (0x10) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:28:1), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xff80 - 0xff8f (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xbfe0 - 0xbfef (0x10) MX[B] (II) Subtractive PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 3 I/O range: [0] -1 0 0xd000 - 0xd0ff (0x100) IX[B] [1] -1 0 0xd400 - 0xd4ff (0x100) IX[B] [2] -1 0 0xd800 - 0xd8ff
Bug#418256: screen stays black after resume, workaround is to switch to console and back
Hi, > Do you still reproduce this problem with a black screen after > suspend/resume with the latest xserver-xorg-video-intel driver? If so, > it would be good if all of you could try with the latest > xserver-xorg-video-intel driver (2:2.0.0-5 currently in experimental). No, that works fine by now. I'm not sure which upgrade fixed it, since hibernate, uswsusp and the intel driver were all upgraded. I didn't need enable the new workaround in hibernate though (switch to text mode after resume that is). Thanks for the good work! best regards, Erich Schubert -- erich@(vitavonni.de|debian.org)--GPG Key ID: 4B3A135C(o_ Reality continues to ruin my life --- Calvin//\ Wer nicht zuweilen zuviel empfindet, der empfindet immer zuwenig. V_/_ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#420712: xserver-xorg-video-intel does not show virtual screens
Wolfgang Lauterbach wrote: > unfortunatelly the experimental driver doesn´t work, too. Do you mean it does not start? Or "just" that your old virtual screen feature does not work? What resolution do you get at startup? Are you able to move/resize the display correctly with xrandr? As explained earlier, the current "Virtual" line does not seem to have the exact meaning that you want. This Virtual line seems to be only meant to resize/place multiple heads in a same big screen with xrandr --pos/--above/--right-of/... From what I understood, you were moving inside your 'virtual' screen by hitting the corners with the mouse, right? I don't know how to do that today. But I also don't really see why you need this :) Brice
Bug#418256: marked as done (screen stays black after resume, workaround is to switch to console and back)
Your message dated Sat, 23 Jun 2007 13:31:07 +0200 with message-id <[EMAIL PROTECTED]> and subject line Bug#418256: screen stays black after resume, workaround is to switch to console and back has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) --- Begin Message --- Package: xserver-xorg-video-intel Version: 2:1.9.94-1 Severity: normal Hi, I'm using ususpend to ram (s2ram) a lot, using the hibernate package. Suspending usually works fine, however the screen always comes back as just black. A workaround I've discovered is to switch to text mode (Ctrl +Alt+F1) and back to the video console (Ctrl+Alt+F7). I've also had the impression (didn't test it thoroughly yet, though) that when I do this too fast, the xserver locks up (i.e. switch back to the video console before the text console screen is reinitialized). I'd also like to point out that the text console screen is just as black, I didn't try to get the login prompt displayed yet, either. hibernate has some options such as switching to text mode before doing the suspend, but enabling them didn't help. I remember the non-modesetting driver to have worked better here, hibernate called 915resolution after resume and then switched to the video console and that worked just fine. --- System information. --- Architecture: i386 Kernel: Linux 2.6.20.3 Debian Release: lenny/sid 500 unstableftp.de.debian.org 1 experimentalftp.de.debian.org --- Package information. --- Depends (Version) | Installed ===-+-== libc6 (>= 2.3.6-6) | 2.3.6.ds1-13 libdrm2 (>= 2.3.0) | 2.3.0-1 xserver-xorg-core (>= 2:1.2.99.903) | 2:1.2.99.905-1 best regards, Erich Schubert -- erich@(vitavonni.de|debian.org)--GPG Key ID: 4B3A135C (o_ A man doesn't know what he knows until he knows what he doesn't know. //\ Glück ist, wenn man dafür geliebt wird, wie man eben ist. V_/_ --- End Message --- --- Begin Message --- Erich Schubert wrote: > No, that works fine by now. I'm not sure which upgrade fixed it, since > hibernate, uswsusp and the intel driver were all upgraded. I didn't need > enable the new workaround in hibernate though (switch to text mode after > resume that is). Thanks for the good work! > Good news, thanks, closing. Brice --- End Message ---
Bug#420350: Still doesnt work
On Sat, Jun 23, 2007 at 12:16:42 +0200, Mateusz Kaduk wrote: > Hi, > > Ok what I did was. > Removed i810, changed in xorg.conf from i810 to intel. > Then > apt-get -t experimental install xserver-xorg-video-intel > which was 2.0.0-5 > Did restart gdm. > Hi, can you install the driver from experimental, restart X, and send us the full log file (/var/log/Xorg.0.log)? Cheers, Julien signature.asc Description: Digital signature
Bug#348873: regression: r128 on laptop ignores supplied modeline for external display, picking LCD panel pixel dimensions
On Tue, 19 Jun 2007, Brice Goglin wrote: > Hi, > > About a year ago, you reported a bug to the Debian BTS regarding > modelines for external display being ignored with a ATI R128 board. Did > you reproduce this problem recently? With Xorg/Etch? With latest > xserver-xorg-core and drivers? If not, I will close this bug in the next > weeks. Yep, latest sid. xdpyinfo still reports: dimensions:1024x768 pixels (321x241 millimeters) /var/log/Xorg.0.log acknowledges that it is picking up the right Monitor section in xorg.conf, (++) ServerLayout "IBM" (**) |-->Screen "IBM" (0) (**) | |-->Monitor "IBM" (**) | |-->Device "ATI mobility" that monitor section has 3 modelines defined: Section "Monitor" Identifier "IBM" VendorName "IBM 19inch+Sun 19inch" ... HorizSync 50-120 #Heck; too many valid modes. Lets just enable them all and be wery wery careful VertRefresh 50-160 DisplaySize 406 304 #Option "NoDPMS" Modeline "IBM_mode_1" 89.20 1024 1045 1205 1408 1024 1027 1030 1056 -hsync -vsync Modeline "IBM_mode_2" 111.50 1280 1298 1498 1756 1024 1024 1035 1040 -hsync -vsync Modeline "IBM_mode_3"120.00 1280 1308 1468 1696 1024 1027 1030 1060 -hsync -vsync ... using this setting in my Screen section: Option "Display" "CRT" Xorg.0.log acknowdlges I have asked for external CRT but then goes on to talk about the laptop's panel, which it should not be caring about: (**) R128(0): Using external CRT for display (II) R128(0): Primary Display == Type 2 (II) R128(0): Panel size: 1024x768 (II) R128(0): Panel ID: Samsung LT141X8-L02 (II) R128(0): Panel Type: Color, Single, TFT (II) R128(0): Panel Interface: LVDS (II) R128(0): PLL parameters: rf=2700 rd=12 min=12000 max=27000; xclk=10500 and then Xorg.0.log goes on to claim it knows nothing about the IBM modelines: (II) R128(0): Not using mode "IBM_mode_1" (no mode of this name) (II) R128(0): Not using mode "IBM_mode_2" (no mode of this name) (II) R128(0): Not using mode "IBM_mode_3" (no mode of this name) Then I end up with cruddy 1024x768: (**) R128(0): *Mode "[EMAIL PROTECTED]": 65.0 MHz (scaled from 83.9 MHz), 60.1 kHz, 74.4 Hz (which I find odd, because if it truly was using the flat panel's settings, should it not have picked up the 60Hz rate the flat panel requires? It works on both displays when I cycle through the laptop's external/interal settings) -- Tim Connors | Anglo-Australian Observatory http://site.aao.gov.au/twc | Coonabarabran, NSW 2357, Australia | Tel: +61 2 6842 6286 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#348873: regression: r128 on laptop ignores supplied modeline for external display, picking LCD panel pixel dimensions
On Sat, 23 Jun 2007, Brice Goglin wrote: > Tim Connors wrote: > > and then Xorg.0.log goes on to claim it knows nothing about the IBM > > modelines: > > (II) R128(0): Not using mode "IBM_mode_1" (no mode of this name) > > (II) R128(0): Not using mode "IBM_mode_2" (no mode of this name) > > (II) R128(0): Not using mode "IBM_mode_3" (no mode of this name) > > > > Then I end up with cruddy 1024x768: > > (**) R128(0): *Mode "[EMAIL PROTECTED]": 65.0 MHz (scaled from 83.9 MHz), > > 60.1 kHz, 74.4 Hz > > (which I find odd, because if it truly was using the flat panel's > > settings, should it not have picked up the 60Hz rate the flat panel > > requires? It works on both displays when I cycle through the > > laptop's external/interal settings) > > > > Could you try with xserver-xorg-video-ati 1:6.6.192-1 currently in > experimental in case it helps? Same result with 1:6.6.192-1. > Or you feel more adventurous, you could try the randr-1.2 branch of the > upstream git repository since it should be better at discovering > modes/resolutions/... automatically without the need for anything in > xorg.conf. I have some packages of this somewhere if you want to try it. The latter certainly will be a problem -- I have good reason for wanting to supply my own modelines -- I have a fixed frequency external monitor. I don't need better discovery -- this all used to work, and I've already worked out which modelines will work on my monitor, and X will not do a better job than me at detecting necessary modelines from a monitor that doesn't do DDC. This used to work prior to 6.9 -- I haven't changed anything to do with my carefully crafted modelines, so those should continue to be working. -- Tim Connors | Anglo-Australian Observatory http://site.aao.gov.au/twc | Coonabarabran, NSW 2357, Australia | Tel: +61 2 6842 6286 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#430217: Fails to build xdpyinfo
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Package: xbase-clients Version: 1:7.2.ds2-2 Severity: serious Justification: no longer builds from source A build gives the following error. A manual build of xdpyinfo works well. ... xdpyinfo checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for XDPYINFO... yes checking for DPY_X11... yes checking for DPY_XEXT... yes checking for X11/extensions/multibuf.h... yes checking for X11/extensions/XShm.h... yes checking for DPY_XKB... yes checking for X11/extensions/XKB.h... yes checking for X11/XKBlib.h... yes checking for DPY_XF86VIDMODE... yes checking for X11/extensions/xf86vmode.h... yes checking for X11/extensions/xf86vmstr.h... yes checking for DPY_XF86DGA... yes checking for X11/extensions/xf86dga.h... yes checking for X11/extensions/xf86dgastr.h... yes checking for DPY_XF86MISC... no not found checking for DPY_XINPUT... yes checking for X11/extensions/XInput.h... yes checking for DPY_XRENDER... yes checking for X11/extensions/Xrender.h... yes checking for DPY_XINERAMA... yes checking for X11/extensions/Xinerama.h... yes checking for DPY_DMX... no not found checking for DPY_XPRINT... no not found checking for DPY_XTST... yes checking for X11/extensions/record.h... yes checking build system type... i486-pc-linux-gnu checking host system type... i486-pc-linux-gnu configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands make[1]: Entering directory `/misc/build/xbase-clients-7.2.ds2/xdpyinfo-obj-i486-linux-gnu' /usr/bin/make all-am make[2]: Entering directory `/misc/build/xbase-clients-7.2.ds2/xdpyinfo-obj-i486-linux-gnu' if gcc -DHAVE_CONFIG_H -I. -I../xdpyinfo -I.-Wall -g -O2 -MT xdpyinfo.o -MD -MP -MF ".deps/xdpyinfo.Tpo" -c -o xdpyinfo.o ../xdpyinfo/xdpy info.c; \ then mv -f ".deps/xdpyinfo.Tpo" ".deps/xdpyinfo.Po"; else rm -f ".deps/xdpyinfo.Tpo"; exit 1; fi ../xdpyinfo/xdpyinfo.c:399: warning: 'hasExtension' defined but not used gcc -Wall -g -O2 -o xdpyinfo xdpyinfo.o -lXext -lX11 -lXtst -lXext -lX11 -lXxf86vm -lXxf86dga-lXi -lXrender -lX11 -lXineram a -lXtst sed -e 's|__vendorversion__|"xdpyinfo 1.0.1" "X Version 11"|' -e 's|__xorgversion__|"xdpyinfo 1.0.1" "X Version 11"|' -e 's|__xservername__|Xorg|g' -e 's| __xconfigfile__|xorg.conf|g' -e 's|__projectroot__|/usr|g' -e 's|__apploaddir__||' -e 's|__appmansuffix__|1|g' -e 's|__libmansuffix__|3|g' -e 's|__adminma nsuffix__|8|g' -e 's|__miscmansuffix__|7|g' -e 's|__filemansuffix__|5|g' < ../xdpyinfo/xdpyinfo.man > xdpyinfo.1 make[2]: Leaving directory `/misc/build/xbase-clients-7.2.ds2/xdpyinfo-obj-i486-linux-gnu' make[1]: Leaving directory `/misc/build/xbase-clients-7.2.ds2/xdpyinfo-obj-i486-linux-gnu' xdriinfo checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking return type of signal handlers... void checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for XDRIINFO... yes checking for library containing glXGetProcAddressARB... no configure: error: cannot find GL library - make sure Mesa or other OpenGL package is installed See `config.log' for more details. make: *** [build-stamp] Fehler 1 debuild: fatal error at line 1228: debian/rules build failed - -- System Information: Debian
Bug#420350: Xorg.log with debug option turned on
Again, As second email came later, I am also attaching Xorg-dbg.tar.gz including Xorg.log* with Debug option turned on, as you asked me for. Xorg-dbg.tar.gz Description: application/compressed-tar
xorg-server: Changes to 'debian-experimental'
GL/Makefile.in |3 GL/apple/Makefile.in|3 GL/glx/Makefile.in |3 GL/glx/glxdri.c | 39 GL/mesa/Makefile.in |3 GL/mesa/X/Makefile.in |3 GL/mesa/glapi/Makefile.in |3 GL/mesa/main/Makefile.in|3 GL/mesa/math/Makefile.in|3 GL/mesa/shader/Makefile.in |3 GL/mesa/shader/grammar/Makefile.in |3 GL/mesa/shader/slang/Makefile.in|3 GL/mesa/swrast/Makefile.in |3 GL/mesa/swrast_setup/Makefile.in|3 GL/mesa/tnl/Makefile.in |3 GL/mesa/vbo/Makefile.in |3 Makefile.in |3 XTrap/Makefile.in |3 Xext/Makefile.in|3 Xi/Makefile.in |3 afb/Makefile.in |3 cfb/Makefile.in |3 cfb32/Makefile.in |3 composite/Makefile.in |3 config/Makefile.in |3 configure | 132 configure.ac| 31 damageext/Makefile.in |3 dbe/Makefile.in |3 debian/changelog|4 debian/control |2 debian/rules| 20 dix/Makefile.in |3 dix/devices.c |1 dix/dispatch.c | 10 dix/dixutils.c |2 dix/tables.c| 15 doc/Makefile.in |3 exa/Makefile.in |3 fb/Makefile.am | 21 fb/Makefile.in | 43 fb/fb.h |2 fb/fbcopy.c | 25 fb/fbfill.c | 28 fb/fbmmx.c | 2898 -- fb/fbmmx.h | 294 - fb/fbpict.c | 474 - fb/fbtrap.c |2 fb/fbwindow.c | 43 fb/wfbrename.h |2 hw/Makefile.in |3 hw/darwin/Makefile.in |3 hw/darwin/bundle/Dutch.lproj/Makefile.in|3 hw/darwin/bundle/English.lproj/Makefile.in |3 hw/darwin/bundle/French.lproj/Makefile.in |3 hw/darwin/bundle/German.lproj/Makefile.in |3 hw/darwin/bundle/Japanese.lproj/Makefile.in |3 hw/darwin/bundle/Makefile.in|3 hw/darwin/bundle/Portuguese.lproj/Makefile.in |3 hw/darwin/bundle/Spanish.lproj/Makefile.in |3 hw/darwin/bundle/Swedish.lproj/Makefile.in |3 hw/darwin/bundle/ko.lproj/Makefile.in |3 hw/darwin/iokit/Makefile.in |3 hw/darwin/quartz/Makefile.in|3 hw/darwin/utils/Makefile.in |3 hw/dmx/Makefile.in |3 hw/dmx/config/Makefile.in |3 hw/dmx/doc/Makefile.in |3 hw/dmx/examples/Makef
Bug#430112: xserver-xorg-video-mga: locks up when displaying 320x240 mode
b9 wrote: > Thanks for letting me know about "build-dep". I have now tested the > driver with my patch and can confirm that it fixes the problem. I have > attached the X log file showing the minimum pixel clock set to 16MHz. > Thanks for testing this, and also for adding a comment to the upstream bug report! For the record, the line that you modified has been with this comment "XXX Guess, need to check this" for more than 7 years now. And the commit that introduced it doesn't give any hint about where the old 12MHz value comes from... Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Re: Processing of libxfont_1.2.9-1_i386.changes
David asked: > Are we ready to upload this? I haven't looked in depth at Kristian's > changes yet, so I don't know if we have to or want to adapt our font > packaging to use the catalogs. I understood the patch to provide extra functionality which potentially makes font packaging simpler, without breaking the existing usage. If I was right about that then the upload ought to be safe, with the new functionality waiting in the wings for whenever we're ready to call on it (I understand xserver 1.4 will be able to use it). Drew -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#420350: Still doesnt work
Julien Cristau wrote: >> Hi, >> >> Ok what I did was. >> Removed i810, changed in xorg.conf from i810 to intel. >> Then >> apt-get -t experimental install xserver-xorg-video-intel >> which was 2.0.0-5 >> Did restart gdm. >> > > can you install the driver from experimental, restart X, and send us the > full log file (/var/log/Xorg.0.log)? > Also, before doing so, it would be good to add Option "ModeDebug" "Yes" to the Device section of xorg.conf so that we get debugging output in Xorg.0.log and the upstream developer can use it to locate the problem. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#348873: regression: r128 on laptop ignores supplied modeline for external display, picking LCD panel pixel dimensions
Tim Connors wrote: > and then Xorg.0.log goes on to claim it knows nothing about the IBM > modelines: > (II) R128(0): Not using mode "IBM_mode_1" (no mode of this name) > (II) R128(0): Not using mode "IBM_mode_2" (no mode of this name) > (II) R128(0): Not using mode "IBM_mode_3" (no mode of this name) > > Then I end up with cruddy 1024x768: > (**) R128(0): *Mode "[EMAIL PROTECTED]": 65.0 MHz (scaled from 83.9 MHz), > 60.1 kHz, 74.4 Hz > (which I find odd, because if it truly was using the flat panel's > settings, should it not have picked up the 60Hz rate the flat panel > requires? It works on both displays when I cycle through the > laptop's external/interal settings) > Could you try with xserver-xorg-video-ati 1:6.6.192-1 currently in experimental in case it helps? Or you feel more adventurous, you could try the randr-1.2 branch of the upstream git repository since it should be better at discovering modes/resolutions/... automatically without the need for anything in xorg.conf. I have some packages of this somewhere if you want to try it. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
what is /etc/X11/rstart ?
Hi, When investigating a cruft report on my (etch) system I've found the following: 1006736450 drwxr-xr-x 4 root root 49 Feb 1 2006 /etc/X11/rstart/ 1174674790 drwxr-xr-x 3 root root 75 Feb 1 2006 /etc/X11/rstart/commands 1342956220 drwxr-xr-x 2 root root 51 Feb 1 2006 /etc/X11/rstart/commands/x11r6 1342956234 -rw-r--r-- 1 root root 1364 May 13 2005 /etc/X11/rstart/commands/x11r6/@List 1343245394 -rwxr-xr-x 1 root root 1297 May 13 2005 /etc/X11/rstart/commands/x11r6/LoadMonitor 1343245404 -rwxr-xr-x 1 root root 1294 May 13 2005 /etc/X11/rstart/commands/x11r6/Terminal 1174674804 -rw-r--r-- 1 root root 1359 May 13 2005 /etc/X11/rstart/commands/@List 1174674814 -rwxr-xr-x 1 root root 1442 May 13 2005 /etc/X11/rstart/commands/ListContexts 1174674824 -rwxr-xr-x 1 root root 1550 May 13 2005 /etc/X11/rstart/commands/ListGenericCommands 1512433480 drwxr-xr-x 2 root root 44 Feb 1 2006 /etc/X11/rstart/contexts 1512433494 -rw-r--r-- 1 root root 1306 May 13 2005 /etc/X11/rstart/contexts/@List 1512433504 -rw-r--r-- 1 root root 1286 May 13 2005 /etc/X11/rstart/contexts/default 1512433514 -rw-r--r-- 1 root root 1552 May 13 2005 /etc/X11/rstart/contexts/x11r6 1006736464 -rw-r--r-- 1 root root 1711 May 13 2005 /etc/X11/rstart/config Do you know what package and how installs this and whether it's used? All I could find was some function to map a symlink to it from /usr/X11R6/lib/X11/rstart in a bunch of x related packages' postinsts... -- Marcin Owsiany <[EMAIL PROTECTED]> http://marcin.owsiany.pl/ GnuPG: 1024D/60F41216 FE67 DA2D 0ACA FC5E 3F75 D6F6 3A0D 8AA0 60F4 1216 signature.asc Description: Digital signature
Bug#56179: NOTICES FOR Prospective Recipient
-- Dear Prospective Recipient, The IBA is a non profit making professional Institute for business advisers,business mentors, business trainers and all business support professionals who give advice and assistance to small and medium sized businesses. I am Lynn Hopkins, a broker for a number of growing firms based in Asia and Switzerland that are involved in Importation and Exportation of products and industrialized goods. As a middleman, my job is to search for a representative who can help establish a link between the customers of our clients in Canada, America and all Europe as well as making payments through you to the company.Get paid on commission of 8% on each payment made through you to us by debtor customers and with more experience, it could get to 12%.There is no catch or special qualifications. But integrity and honesty is a must. If you think this is something you could do and for more details, Send the information as requested below via email to me.([EMAIL PROTECTED]). Always remeber to quote your Reference Number: IBA/243A/07/702 in all correnspondence.(FORM A1) Name. Mailing address.. Age:.. Status: State/Country.. Tel(Mobile)/Fax:. Occupation Company name:(If any)... Position Held... Regards, Lynn Hopkins. Department Marketing Institute of Business Advisers Contact: +(44) 701 115 0431 +(44) 704 013 1480 Office Email:[EMAIL PROTECTED] P/S:Remeber your Reference Number:IBA/243A/07/702
Bug#420712: xserver-xorg-video-intel does not show virtual screens
Am Samstag, 23. Juni 2007 schrieben Sie: > > Do you mean it does not start? Or "just" that your old virtual screen > feature does not work? What resolution do you get at startup? Are you > able to move/resize the display correctly with xrandr? > The driver starts correctly and I get a resolution of 1024x768, which is o.k for me. It is also the maximum resolution my monitor can handle. Unfortunatelly I am not used to xrandr and how to handle it. I never used it before. The history of my favor for a virtual screen is, that I had a small 17'' CRT-monitor. With my first LINUX ditribution about ten years ago, a SuSE, I came along to get used to a virtual screen size bigger than my monitor could show, as described in the xorg.conf manpage: Display Subsection - Virtual xdim ydim. This feature existed until xserver-xorg-video-i810_1.7.2-4.i386.deb. > > As explained earlier, the current "Virtual" line does not seem to have > the exact meaning that you want. This Virtual line seems to be only > meant to resize/place multiple heads in a same big screen with xrandr > --pos/--above/--right-of/... From what I understood, you were moving > inside your 'virtual' screen by hitting the corners with the mouse, > right? I don't know how to do that today. But I also don't really see > why you need this :) > Meanwhile it is not any more important for me to have this virtual screen feature of the hardware driver, because I was forced by the bug to use a fixed 1024x768 resolution and now use the virtual screens provided by my windowmanager, what is a good solution for me. So we could finish this bugreport quoting the xorg.conf manpage: "Some drivers/hardware combinations do not support virtual screens. Refer to the appropriate driver-specific documentation for details". Thank you for your efforts and help, Brice. Wolfgang -- Wolfgang Lauterbach Goethering 54 90547 Stein This is Linux country. If you listen carefully, you can hear Windows reboot... signature.asc Description: This is a digitally signed message part.
Bug#423921: crash when starting xgalaga
On Sat, 2007-06-23 at 10:24 +0200, Brice Goglin wrote: > Hi Joey, > > Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 > currently in experimental) and report back whether it fixes this crash > in xgalaga? > Works fine for me at the moment. I suspect it was the most recent 855 fixes. Drew -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#430121: xterm: EOL characters missing from selection (affects triple-click)
On Fri, Jun 22, 2007 at 04:50:10PM +0200, Vincent Lefevre wrote: > On 2007-06-22 15:58:17 +0200, Vincent Lefevre wrote: > > Package: xterm > > Version: 226-1 > > Severity: normal > > > > EOL characters are sometimes missing from the selection. This affects > > the triple-click, which selects too much in such a case. perhaps you are using "screen" -- Thomas E. Dickey http://invisible-island.net ftp://invisible-island.net pgpV7SzNmiJgb.pgp Description: PGP signature
Bug#320828: Debian bug 320828
I had a similar problem (SIGFPE in ATIDivide); I didn't track down the cause, but with this workaround, X.org stopped crashing. I also filed a bug report with Xorg: https://bugs.freedesktop.org/show_bug.cgi?id=11054 --- programs/Xserver/hw/xfree86/drivers/ati/atimach64xv.c.orig 2005-07-11 02:29:44.0 + +++ programs/Xserver/hw/xfree86/drivers/ati/atimach64xv.c @@ -959,6 +959,9 @@ ATIMach64PutImage if (pATI->ActiveSurface) return Success; +if (DstW == 0 || DstH == 0) +return BadValue; + if (!ATIMach64ClipVideo(pScreenInfo, pATI, ImageID, SrcX, SrcY, SrcW, SrcH, DstX, DstY, &DstW, &DstH, -- Sergey Svishchev -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
libxt: Changes to 'master'
New branch 'master' available with the following commits: commit 6b483e355de6c5ee5dc635ab9b817bf72680b016 Author: Julien Cristau <[EMAIL PROTECTED]> Date: Sat Jun 23 15:20:09 2007 +0100 Allow C++ apps to build using libXt commit 845e51c740574db2f72a5e7c5462d8f56a3c4e22 Author: Andreas Luik <[EMAIL PROTECTED]> Date: Sun Apr 8 00:43:56 2007 +0300 Recalculate fd_set more aggressively (bug #808) select() can modify the fd set, so be a bit pessimistic and recalculate it more often. commit 007d9e5f8b2edc3ff8ce8b2f96b8f56a417bb78d Author: Matthieu Herrb <[EMAIL PROTECTED]> Date: Mon Feb 26 18:27:43 2007 +0100 Sync XtGetErrorDatabaseText() prototype with reality. commit 4e7031510d05471e77ff48355b23fc8e4302648c Author: Ben Byer <[EMAIL PROTECTED](none)> Date: Tue Feb 20 01:05:27 2007 -0800 added -flat_namespace to CFLAGS for Darwin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#420350: Xorg.log and Xstrace.log
Hi I am including Xstrace.log and Xorg.log that I am getting with that driver from exprimental in attachments. Xorg.log.tar.gz Description: application/compressed-tar Xstrace.log.gz Description: GNU Zip compressed data
Processed: Re: Bug#320828: Debian bug 320828
Processing commands for [EMAIL PROTECTED]: > forwarded 320828 https://bugs.freedesktop.org/show_bug.cgi?id=11054 Bug#320828: xserver-xorg: Sometimes crashes in ATI driver when resizing XV window Noted your statement that Bug has been forwarded to https://bugs.freedesktop.org/show_bug.cgi?id=11054. > thank you Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#430217: Fails to build xdpyinfo
On Sat, Jun 23, 2007 at 14:51:42 +0200, Klaus Ethgen wrote: > Package: xbase-clients > Version: 1:7.2.ds2-2 > Severity: serious > Justification: no longer builds from source > > A build gives the following error. A manual build of xdpyinfo works well. > The build below fails in xdriinfo... > ... > xdriinfo > checking for a BSD-compatible install... /usr/bin/install -c > checking whether build environment is sane... yes > checking for gawk... gawk > checking whether make sets $(MAKE)... yes > checking whether to enable maintainer-specific portions of Makefiles... no > checking for gcc... gcc > checking for C compiler default output file name... a.out > checking whether the C compiler works... yes > checking whether we are cross compiling... no > checking for suffix of executables... > checking for suffix of object files... o > checking whether we are using the GNU C compiler... yes > checking whether gcc accepts -g... yes > checking for gcc option to accept ISO C89... none needed > checking for style of include used by make... GNU > checking dependency style of gcc... gcc3 > checking for a BSD-compatible install... /usr/bin/install -c > checking return type of signal handlers... void > checking for pkg-config... /usr/bin/pkg-config > checking pkg-config is at least version 0.9.0... yes > checking for XDRIINFO... yes > checking for library containing glXGetProcAddressARB... no > configure: error: cannot find GL library - make sure Mesa or other OpenGL > package is installed > See `config.log' for more details. > make: *** [build-stamp] Fehler 1 > debuild: fatal error at line 1228: > debian/rules build failed > Please provide config.log and check that libgl1-mesa-dev is installed. Cheers, Julien signature.asc Description: Digital signature
Bug#428148: gxine crashes at startup with xserver-xorg-video-intel
Hi, Brice Goglin wrote: Hi, Could you try the latest xserver-xorg-video-intel package (2:2.0.0-5 currently in experimental) and report back whether it fixes this crash of gxine? From what I read, the problem only occurs when you use XAA with Composite? EXA has been designed towards compositing, so you'd rather not use XAA with Composite anyway. Also note that "XAANoOffscreenPixmaps" does not matter if you use EXA instead of XAA. Brice I tried v. 2.0.0-5 but the gxine crash is not yet fixed, when using XAA with Composite and option "XAANoOffscreenPixmaps" it still crashes with error 'BadAlloc (insufficient resources for operation)'. It works when "XAANoOffscreenPixmaps" is removed or Composite is disabled. I also tried EXA instead of XAA but it does not work. My fonts, icons and pictures look as if the DPI is to low (not enough pixels). Occasionally (when X is restarted) they look good, but usually they look bad. This problem with EXA occurs with all the versions 2:2.0.0 Jos -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#320828: Debian bug 320828
forwarded 320828 https://bugs.freedesktop.org/show_bug.cgi?id=11054 thank you Sergey Svishchev wrote: > I had a similar problem (SIGFPE in ATIDivide); I didn't track down the > cause, but with this workaround, X.org stopped crashing. I also filed a > bug report with Xorg: https://bugs.freedesktop.org/show_bug.cgi?id=11054 Thanks for jumping into this report. I'll consider applying your patch for the next upload of this driver. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#430217: Fails to build xdpyinfo
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 > xdriinfo Sorry the wrong one. It is xdriinfo which does not build. And I also find the reason. The symlink /usr/lib/libGL.so is needed but not on my system. Regards Klaus - -- Klaus Ethgenhttp://www.ethgen.de/ pub 2048R/D1A4EDE5 2000-02-26 Klaus Ethgen <[EMAIL PROTECTED]> Fingerprint: D7 67 71 C4 99 A6 D4 FE EA 40 30 57 3C 88 26 2B -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBRn0da5+OKpjRpO3lAQLsuwgAj521dc5qnHzg7j9gfS1rQuFtSItrmiHC 1AOZG3/yTS0RtIMQRqdpvKRHXpjWFIGH4C6DBjtieO/LN842YlFUn1ZpjwZvAdaC ejjdAk5bKcaYXw6NOyB1j7hafGIIuJlsxt0cm4W/0ozQ+vVrVshwhm7B15hgJl+M UhQu3aMiZyhKVq/K0Mdl9pqDEr3vHYEK/LR7JKbDoPfvC5RjV2eP8ItmGB/fTFMT 5GfS6AXUjNc4mZvPfD6Xn9scmDQfcFpfSFzt570D1EQbjeQ0Iio9phrGUplg4nE7 YDYRWoDc/Qp3rdUycwsony9mEUBq8njZooZLTRl0n+oF2ygReiKkDA== =0wTQ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#430159: compiz: black screen after resume from suspend to ram, intel graphic card
Brice Goglin wrote: > Christophe DURAND wrote: > >> So, i have nothing in /usr/share/bug/xserver-xorg/bug after resume, the >> file doesn't exist. >> >> > > Oops, sorry, my fault, it should have been > /usr/share/bug/xserver-xorg/script 3>&1 > > Which xserver-xorg-video-intel do you have? The bug might well be caused > by the driver instead of compiz. It might be good to try the latest > xserver-xorg-video-intel currently in experimental (2:2.0.0-5). > > Brice > > > I've tried all versions of the i810 and the new intel drivers from testing, unstable and experimental, always with the same result. Perhaps an interesting thing is that after resume from suspend, the graphic session isn't restored on the F7 tty but on F8. This command (/usr/share/bug/xserver-xorg/script 3>&1) give me exactly the same results than the xorg.0.log i already send to you :( For information, on an up to date SID the 2/06/2007, resume from suspend was ok. I don't know exactly which packages have changed since this date, nor exactly when the problem have appeared. I hope this help christophe signature.asc Description: OpenPGP digital signature
Bug#430159: compiz: black screen after resume from suspend to ram, intel graphic card
Christophe DURAND wrote: > I've tried all versions of the i810 and the new intel drivers from > testing, unstable and experimental, always with the same result. > Good to know, thanks for doing this. > Perhaps an interesting thing is that after resume from suspend, the > graphic session isn't restored on the F7 tty but on F8. > Do you mean: 1) a X session in F7 will be moved to F8 after suspend or 2) a Xsession on F7 won't be restored at all, while a Xsession on F8 will be fine (still on F8) ? > For information, on an up to date SID the 2/06/2007, resume from suspend > was ok. I don't know exactly which packages have changed since this > date, nor exactly when the problem have appeared. > If I remember correctly, nothing big changed in X packages in unstable recently. At least not the Xserver, Intel driver, Mesa or compiz. Other things involved in suspend are the kernel and possibly some suspend/resume script. Did you change your kernel recently? How do you suspend to ram? /var/log/aptitude or /var/log/dpkg.log might give you some hints about what have been upgraded recently. Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#420506: DRI fails
O Sáb, 23-06-2007 ás 10:11 +0200, Brice Goglin escribiu: > Hi, > > Could you try the latest xserver-xorg-video-intel (2:2.0.0-5 currently > in experimental) and report back whether it works better? Your DRI > problems apparently got solved by removing the VideoRAM line. The blue > XV problem should be fixed by now. So what remains is the freeze when a > game changes the resolution, and the drmWaitVBlank warning. The latest > package has a good chance of fixing these too. > > Thanks, > Brice > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#420506: DRI fails
O Sáb, 23-06-2007 ás 10:11 +0200, Brice Goglin escribiu: > Hi, > > Could you try the latest xserver-xorg-video-intel (2:2.0.0-5 currently > in experimental) and report back whether it works better? Your DRI > problems apparently got solved by removing the VideoRAM line. The blue > XV problem should be fixed by now. So what remains is the freeze when a > game changes the resolution, and the drmWaitVBlank warning. The latest > package has a good chance of fixing these too. > > Thanks, > Brice > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#420506: DRI fails
Hi, sorry for empty mails that I send before. I install the new version and all seem work fine. The mplayer plays fine in the xv mode and now the games works perfectly. The drmWaitVBlank warning not disappears. Thanks for all. O Sáb, 23-06-2007 ás 10:11 +0200, Brice Goglin escribiu: > Hi, > > Could you try the latest xserver-xorg-video-intel (2:2.0.0-5 currently > in experimental) and report back whether it works better? Your DRI > problems apparently got solved by removing the VideoRAM line. The blue > XV problem should be fixed by now. So what remains is the freeze when a > game changes the resolution, and the drmWaitVBlank warning. The latest > package has a good chance of fixing these too. > > Thanks, > Brice > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#420506: marked as done (DRI fails)
Your message dated Sat, 23 Jun 2007 22:45:05 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Bug#420506: DRI fails
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: xserver-xorg-video-i810
Version: 2:2.0.0-1
Severity: normal
--- Please enter the report below this line. ---
After the last upgrade, the DRI starts to fail.
libertade:~# glxinfo | grep rendering
direct rendering: No
xorg.0.log
--
...
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(EE) intel(0): detecting sil164
(EE) intel(0): Unable to read from DVOI2C_E Slave 112.
...
(EE) AIGLX: Screen 0 is not DRI capable
...
lspci -v
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated
Graphics Device (rev 02) (prog-if 00 [VGA])Subsystem: Acer Incorporated
[ALI] Unknown device 0064
Flags: bus master, fast devsel, latency 0, IRQ 6
Memory at e800 (32-bit, prefetchable) [size=128M]
Memory at e000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 1800 [size=8]
Capabilities: [d0] Power Management version 1
xorg.conf
-
...
Section "Device"
Identifier "Tarxeta de Video Xenérica"
Driver "i810"
BusID "PCI:0:2:0"
VideoRam65536
Option "XVideo""On"
EndSection
...
Section "DRI"
Mode0666
EndSection
...
--- System information. ---
Architecture: i386
Kernel: Linux 2.6.18-4-686
Debian Release: lenny/sid
--- Package information. ---
Depends (Version) | Installed
===-+-===
xserver-xorg-video-intel| 2:2.0.0-1
Thanks for your attention, and sorry if it's a false bug.
--- End Message ---
--- Begin Message ---
Version: 2:2.0.0-5
Esteban Paz Freire wrote:
> Hi, sorry for empty mails that I send before.
>
No problem, it's good to have a little bit of suspense :)
> I install the new version and all seem work fine.
> The mplayer plays fine in the xv mode and now the games works perfectly.
>
Good to know, I am closing this bug for now then.
> The drmWaitVBlank warning not disappears.
>
There are a couple bugs upstream talking about these warnings. Using
driconf to change vblank_mode ('Synchronization with vertical refresh
(swap intervals)') to 0 ('Never synchronize with vertical refresh,
ignore application's choice') might make them disappear (until a proper
fix is found).
Brice
--- End Message ---
Bug#320828: xserver-xorg: Sometimes crashes in ATI driver when resizing XV window
Hi, I'm the one who filed this bug. Sorry for the late reply; my laptop (the machine I encountered this problem on) is a bit defunct, so I spent some time resurrecting it, and installing Etch on it. On Wed, Jun 20, 2007 at 08:45:52PM +0200, Brice Goglin wrote: > About 2 years ago, you reported a bug to the Debian BTS regarding a > crash of the X server when resizing a XV window on an ATI board. Did you > reproduce this problem recently? With Xorg/Etch? With latest > xserver-xorg-core and drivers? If not, I will close this bug in the next > weeks. I installed Debian Etch on it, and I was able to reproduce the crash just like two years ago. I also tried out Sergey's patch, but it still crashed on me. I did some more experimenting; MPlayer allows resizing the window without keeping the correct aspect ratio (at least, in the WM I tested with), but it will not allow resizing to smaller than either 4 pixels horizontal or 4 pixels vertical. When I reduce the width of the MPlayer window, Xorg won't crash, even at 4 pixels wide. But when I reduce the height of the MPlayer window, Xorg will crash (with a SIGFPE, as always) as soon as I get below 16 pixels. So I changed Sergey's lines to: if (DstW < 16 || DstH < 16) return BadValue; And then I couldn't get Xorg to crash anymore (but obviously MPlayer would crash with a BadValue error). I have no idea why Xorg crashes for me on XV windows less than 16 pixels high :/ Marcel Moreaux <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#430376: xbase-clients: [xrandr] xrandr(1) contains unfinished sentence
Package: xbase-clients Version: 1:7.2.ds2-2 Severity: minor | .SH "RandR version 1.1 options" | These options are available for X server supporting RandR version 1.1 or | older. They are still valid for newer X servers, but they don't They don't what? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Processed: Re: Bug#430376: xbase-clients: [xrandr] xrandr(1) contains unfinished sentence
Processing commands for [EMAIL PROTECTED]: > reassign 430376 x11-xserver-utils Bug#430376: xbase-clients: [xrandr] xrandr(1) contains unfinished sentence Bug reassigned from package `xbase-clients' to `x11-xserver-utils'. > forcemerge 430122 430376 Bug#430122: x11-xserver-utils: xrandr(1) breaks off in mid-sentence Bug#430376: xbase-clients: [xrandr] xrandr(1) contains unfinished sentence Forcibly Merged 430122 430376. > thank you Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#430376: xbase-clients: [xrandr] xrandr(1) contains unfinished sentence
reassign 430376 x11-xserver-utils forcemerge 430122 430376 thank you Clint Adams wrote: > Package: xbase-clients > Version: 1:7.2.ds2-2 > Severity: minor > > | .SH "RandR version 1.1 options" > | These options are available for X server supporting RandR version 1.1 or > | older. They are still valid for newer X servers, but they don't > > They don't what? > Upstream noticed this problem right after the last release of xrandr. I am merging this bug with the same bug in x11-xserver-utils/experimental (which will contain xrandr once the xbase-clients split hits unstable). Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: what is /etc/X11/rstart ?
Marcin Owsiany wrote: > 1006736450 drwxr-xr-x 4 root root 49 Feb 1 2006 > /etc/X11/rstart/ > 1174674790 drwxr-xr-x 3 root root 75 Feb 1 2006 > /etc/X11/rstart/commands > 1342956220 drwxr-xr-x 2 root root 51 Feb 1 2006 > /etc/X11/rstart/commands/x11r6 > 1342956234 -rw-r--r-- 1 root root 1364 May 13 2005 > /etc/X11/rstart/commands/x11r6/@List > 1343245394 -rwxr-xr-x 1 root root 1297 May 13 2005 > /etc/X11/rstart/commands/x11r6/LoadMonitor > 1343245404 -rwxr-xr-x 1 root root 1294 May 13 2005 > /etc/X11/rstart/commands/x11r6/Terminal > 1174674804 -rw-r--r-- 1 root root 1359 May 13 2005 > /etc/X11/rstart/commands/@List > 1174674814 -rwxr-xr-x 1 root root 1442 May 13 2005 > /etc/X11/rstart/commands/ListContexts > 1174674824 -rwxr-xr-x 1 root root 1550 May 13 2005 > /etc/X11/rstart/commands/ListGenericCommands > 1512433480 drwxr-xr-x 2 root root 44 Feb 1 2006 > /etc/X11/rstart/contexts > 1512433494 -rw-r--r-- 1 root root 1306 May 13 2005 > /etc/X11/rstart/contexts/@List > 1512433504 -rw-r--r-- 1 root root 1286 May 13 2005 > /etc/X11/rstart/contexts/default > 1512433514 -rw-r--r-- 1 root root 1552 May 13 2005 > /etc/X11/rstart/contexts/x11r6 > 1006736464 -rw-r--r-- 1 root root 1711 May 13 2005 > /etc/X11/rstart/config > > Do you know what package and how installs this and whether it's used? > It seems to come from xutils in sarge. > All I could find was some function to map a symlink to it from > /usr/X11R6/lib/X11/rstart in a bunch of x related packages' postinsts.. /usr/lib/X11/rstart seems to be their newer location (in xutils/etch), so the old ones are probably useless now. Some upgrade forgot to remove them, it's been reported in Bug#382360 xutils: upgrading from sarge, then purging, leaves /etc/X11/rstart/* Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#422777: marked as done (xserver-xorg: MergedFB CRT2 Clone stopped working after reboot)
Your message dated Sun, 24 Jun 2007 01:34:00 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Bug#422602: xserver-xorg: dualhead with ati broken
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: xserver-xorg
Version: 1:7.2-3
Severity: normal
Hi,
When I rebooted my laptop (Apple iBook G4) this morning, the second
screen remained blank. The Xorg.0.log config file shows "No valid
mode found for CRTC2, disabling MergedFB". I haven't changed my
xorg.conf since 2006-11-21, so I'm pretty sure it's related to a
recent Xorg update. I can't be sure which one since I may have
updated Xorg more than once between reboots (and rarely restart X
other than on reboot). I am however quite sure I haven't installed,
removed or reconfigured Xorg packages recently other than during
aptitude upgrades or aptitude dist-upgrades. Also, I rebooted
sometime in the last two weeks without problems, so it must be a
problem with a recent Xorg update. [yes, I aptitude up{date,grade}
more or less weekly]
I hope someone can help me out here, since I have no idea whatsoever
how to fix this (other than attempting some Xorg downgrades, but
that's hardly "fixing"). If there's anything I can do myself (that
doesn't involve intimate knowledge of Xorg internals), please let me
know.
- Felix
-- Package-specific info:
Contents of /var/lib/x11/X.roster:
xserver-xorg
/etc/X11/X target does not match checksum in /var/lib/x11/X.md5sum.
X server symlink status:
lrwxrwxrwx 1 root root 13 2006-04-20 13:15 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1996176 2007-04-27 00:28 /usr/bin/Xorg
Contents of /var/lib/x11/xorg.conf.roster:
xserver-xorg
VGA-compatible devices on PCI bus:
:00:10.0 VGA compatible controller: ATI Technologies Inc M11 NV [FireGL
Mobility T2e] (rev 80)
/etc/X11/xorg.conf does not match checksum in /var/lib/x11/xorg.conf.md5sum.
Xorg X server configuration file status:
lrwxrwxrwx 1 root root 34 2006-05-04 11:35 /etc/X11/xorg.conf ->
/etc/flx/cfg/vinter/xorg/xorg.conf
Contents of /etc/X11/xorg.conf:
# /etc/X11/xorg.conf
#
# Felix C. Stegerman <[EMAIL PROTECTED]>
# 2006-11-21
#
# --
#
# Xorg X Window System server configuration file
#
# --
Section "Files"
FontPath"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath"/usr/share/fonts/X11/misc"
FontPath"/usr/share/fonts/X11/100dpi"
FontPath"/usr/share/fonts/X11/75dpi"
FontPath"/usr/share/fonts/X11/Type1"
FontPath"/usr/share/fonts/truetype"
EndSection
Section "Module"
Load"bitmap"
Load"dbe"
Load"ddc"
Load"dri"
Load"evdev"
Load"extmod"
Load"freetype"
Load"glx"
Load"int10"
Load"record"
Load"type1"
Load"vbe"
EndSection
Section "InputDevice"
Identifier "Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device""/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Buttons" "3"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "ATI Card [primary]"
Driver "ati"
BusID "PCI:0:16:0"
Option "MergedFB" "true"
Option "MetaModes" "1024x768"
Option "MergedDPI" "96 96"
Option "CRT2HSync" "30.0-96.0"
Option "CRT2VRefresh" "50.0-160.0"
Option "CRT2Position" "Clone"
EndSection
Section "Device"
Identifier "ATI Card [secondary]"
Driver "ati"
BusID "PCI:0:16:0"
Screen 1
EndSection
Section "Monitor"
Identifier "LCD Screen [internal]"
Option "DPMS"
Option "PanelSize" "1024x768"
EndSection
Section "Monitor"
Identifier "CRT Screen [external]"
Option "DPMS"
HorizSync 30-96
VertRefresh 50-160
DisplaySize 346 260
EndSection
Section "Screen"
Identifier "Screen [internal]"
Device "ATI Card [primary]"
Monitor
Processed: retitle 413500 to xserver-xorg-video-ati: 1:6.6.3-5 and above does not work on RS482 [Radeon Xpress 200]
Processing commands for [EMAIL PROTECTED]: > # Automatically generated email from bts, devscripts version 2.10.4 > retitle 413500 xserver-xorg-video-ati: 1:6.6.3-5 and above does not work on > RS482 [Radeon Xpress 200] Bug#413500: xserver-xorg 7.2-1 + xserver-xorg-video-ati 1:6.6.3-5 = no X11 at all Changed Bug title to `xserver-xorg-video-ati: 1:6.6.3-5 and above does not work on RS482 [Radeon Xpress 200]' from `xserver-xorg 7.2-1 + xserver-xorg-video-ati 1:6.6.3-5 = no X11 at all'. > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#412034: marked as done (X.Org, Radeon 9550SE)
Your message dated Sun, 24 Jun 2007 01:42:13 +0200 with message-id <[EMAIL PROTECTED]> and subject line Bug#412034: X.Org: Radeon 9550SE has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) --- Begin Message --- Package: xserver-xorg Version: 1:7.1.0-12 When i set "radeon" or "ati" as driver for my Radeon 9550SE i just get a black screen wenn starting X. There is no error to find in the Xorg.0.log and when i set "vesa" as driver it works. I don't know if that matters, but when i was using XFree86 i had the same problem with a 2.4.6 kernel but not with a 2.6.8 (using the same version of XFree86). Now i'm using Debian Etch and a 2.6.18 kernel. -- Ist Ihr Browser Vista-kompatibel? Jetzt die neuesten Browser-Versionen downloaden: http://www.gmx.net/de/go/browser --- End Message --- --- Begin Message --- Closing since I didn't get any reply to question within more than 3 months. If the bug still occurs with xserver-xorg-video-ati 6.6.3 and 6.6.192 (currently in experimental), feel free to reopen and please send the corresponding /var/log/Xorg.0.log. Brice --- End Message ---
Bug#412228: xserver-xorg-video-ati: fails to start with DRI and nearly hangs machine
Hi Mario, Does this hang of the machine when using DRI on your ATI board still occurs? If so, could you try xserver-xorg-video-ati 1:6.6.192-1 currently in experimental? Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#413721: xserver-xorg-video-ati: The current version of the ati driver in experimental crashes frequently.
Hi, Does this crash of the ATI driver still occurs? Could you try with xserver-xorg-video-ati 1:6.6.192-1 currently in experimental? thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#413697: xserver-xorg-video-ati: Crash on exit and failure to restart
Hi Paul, Does this crash of the X server on exit still occurs? Did you have a chance to try with a more recent Xserver and ATI driver? xserver-xorg-core 2:1.3.0.0.dfsg-6 is currently in testing while xserver-xorg-video-ati 1:6.6.192 is in experimental. Since the backtrace of your crash didn't contain anything apparently ATI specific, I'd suggest upgrading only xserver-xorg-core first. Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#420756: xserver-xorg-video-ati: [ati/radeon] Freezes system if inactive
Hi Christopher, Does this freeze still occurs? If so, could you try with xserver-xorg-video-ati 1:6.6.192-1 currently in experimental? Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#406373: xserver-xorg-video-ati: [ia64] No direct rendering w/ Radeon R300 [FireGL X1]
Hi Bryan, Is there anything new about this bug? Still using the same workaround? Did you try xserver-xorg-core 1.3 (currently in testing) and xserver-xorg-video-ati 6.6.192 (currently in experimental) in case they help? Unfortunately, looking at the upstream bug report, this issue does not look like it's going to be fixed soon... Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#420054: marked as done (xorg installs ati driver for radeon device)
Your message dated Sun, 24 Jun 2007 02:16:41 +0200 with message-id <[EMAIL PROTECTED]> and subject line Bug#420054: xorg installs ati driver for radeon device has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) --- Begin Message --- Package: xorg Version: 7.1.1 I just installed etch/stable and everything went fine except when the system started up for the first time I got the following error: Fatal server error: no screens found I have a Radeon X300 SE 128MB HyperMemory video card. I eventually found and fixed the problem. I'm not sure how the original /etc/X11/xorg.conf file is generated, but in the Section "Device" for the Radeon X300, the Driver is listed as "ati". I changed that to "radeon" and all is well. I suggest that the default driver name be "radeon" instead of "ati" for this and any other affected video cards. This will save some other innocent user the frustration I had to go through. I am using Debian GNU/Linux 4.0r0, kernel 2.6.18-4 etch stable. Please let me know if I can be of any assistance in expediting this bug fix. Sincerely, Mike Saavedra --- End Message --- --- Begin Message --- Version: 1:6.6.191-1 Marking as fixed in version 6.6.191 (6.6.192 is currently in experimental) as said by Michel earlier and confirmed by other people. Brice --- End Message ---
Bug#413694: Xv not working for Radeon Mobility M300
Hi, Does this problem with XV not working on your Radeon Mobility M22 still occur today? Could you try with xserver-xorg-video-ati 1:6.6.192-1 currently in experimental? Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#412449: marked as done (X will only run at 640x480 with Radeon Mobility M6)
Your message dated Sun, 24 Jun 2007 02:12:54 +0200 with message-id <[EMAIL PROTECTED]> and subject line Bug#412449: X will only run at 640x480 with Radeon Mobility M6 has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) --- Begin Message --- Package: xserver-xorg Version: 7.1.0-12 Since aptitude upgrading recently the Xorg server will only run at 640x480 mode. Here are some snippets from Xorg.0.log: X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 (II) ATI: ATI driver (version 6.6.3) for chipsets: ati, ativga (II) Primary Device is: PCI 01:00:0 (II) ATI: Candidate "Device" section "ATI Technologies Inc Radeon Mobility M6 LY". (--) Chipset ATI Radeon Mobility M6 LY (AGP) found (II) Loading sub module "radeon" (II) LoadModule: "radeon" (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so (II) Module radeon: vendor="X.Org Foundation" compiled for 7.1.1, module version = 4.2.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 1.0 (II) RADEON(0): Primary V_BIOS segment is: 0xc000 (--) RADEON(0): Chipset: "ATI Radeon Mobility M6 LY (AGP)" (ChipID = 0x4c59) (--) RADEON(0): Linear framebuffer at 0xe000 (II) RADEON(0): Primary: Monitor -- LVDS Connector -- DVI-D DAC Type -- TVDAC/ExtDAC TMDS Type -- Internal DDC Type -- MONID (II) RADEON(0): Secondary: Monitor -- CRT Connector -- VGA DAC Type -- Primary TMDS Type -- NONE DDC Type -- VGA_DDC (II) RADEON(0): PLL parameters: rf=2700 rd=60 min=12000 max=35000; xclk=16600 (WW) RADEON(0): Failed to detect secondary monitor DDC, default HSync and VRefresh used (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0) (II) RADEON(0): Validating modes on Primary head - (II) RADEON(0): Panel ID string: 1024x768 (II) RADEON(0): Panel Size from BIOS: 1024x768 (II) RADEON(0): BIOS provided dividers will be used. (II) RADEON(0): Total number of valid DDC mode(s) found: 0 (II) RADEON(0): Valid mode using on-chip RMX: 1024x768 (II) RADEON(0): Valid mode using on-chip RMX: 800x600 (II) RADEON(0): Valid mode using on-chip RMX: 640x480 (II) RADEON(0): Total number of valid FP mode(s) found: 3 (II) RADEON(0): Validating CRTC2 modes for MergedFB (II) RADEON(0): CRT2 Monitor: Using hsync range of 28.00-33.00 kHz (II) RADEON(0): CRT2 Monitor: Using vrefresh range of 43.00-72.00 Hz (II) RADEON(0): Clock range: 12.00 to 350.00 MHz (II) RADEON(0): Not using default mode "800x600" (hsync out of range) (II) RADEON(0): Not using default mode "400x300" (hsync out of range) (II) RADEON(0): Not using default mode "800x600" (hsync out of range) (II) RADEON(0): Not using default mode "400x300" (hsync out of range) (II) RADEON(0): Not using default mode "1024x768" (hsync out of range) (II) RADEON(0): Not using default mode "512x384" (hsync out of range) (II) RADEON(0): Not using default mode "1024x768" (hsync out of range) (II) RADEON(0): Not using mode "1024x768" (no mode of this name) (II) RADEON(0): Not using mode "800x600" (no mode of this name) (II) RADEON(0): Total of 2 CRTC2 modes found for MergedFB (II) RADEON(0): Modes for CRT1: (--) RADEON(0): Virtual size is 1024x768 (pitch 1024) (**) RADEON(0): *Mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (II) RADEON(0): Modeline "1024x768" 65.00 1024 1040 1176 1344 768 770 776 806 (**) RADEON(0): *Mode "800x600": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (II) RADEON(0): Modeline "800x600" 65.00 800 1040 1176 1344 600 770 776 806 (**) RADEON(0): *Mode "640x480": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (II) RADEON(0): Modeline "640x480" 65.00 640 1040 1176 1344 480 770 776 806 (**) RADEON(0): Default mode "640x350": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (II) RADEON(0): Modeline "640x350" 65.00 640 1040 1176 1344 350 770 776 806 (**) RADEON(0): Default mode "640x400": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (II) RADEON(0): Modeline "640x400" 65.00 640 1040 1176 1344 400 770 776 806 (**) RADEON(0): Default mode "720x400": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (II) RADEON(0): Modeline "720x400" 65.00 720 1040 1176 1344 400 770 776 806 (**) RADEON(0): Default mode "832x624": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (II) RADEON(0): Modeline "832x624" 65.00 832 1040 1176 1344 624 770 776 806 (II) RADEON(0): Modes for CRT2: (--) RADEON(0): Virtual size is 640x480 (pitch 640) (**) RADEON(0): *
Bug#421095: Detects a non-existing monitor on the non-existing secondary head
Hi Gabor, Does this problem with the ATI driver detecting a non-existing monitor on the non-existing second head still occur? Could you try with xserver-xorg-video-ati 1:6.6.192-1 currently in experimental? thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#425814: xserver-xorg-video-ati: Xv broken on Mach64 3D Rage LT Pro AGP-133
Hi Svante, Is there anything new about XV being broken on your mach64 board? Did you by chance look at Michel's earlier questions? (see http://bugs.debian.org/cgi-bin/bugreport.cgi?msg=35;bug=425814) It looks like we'll have to reassign this bug to the server core (xserver-xorg-core) since downgrading it to 1.1.1 fixed the problem while changing xserver-xorg-video-ati's version did not apparently help. Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Processed: bug 406373 is forwarded to https://bugs.freedesktop.org/show_bug.cgi?id=7770
Processing commands for [EMAIL PROTECTED]: > # Automatically generated email from bts, devscripts version 2.10.4 > forwarded 406373 https://bugs.freedesktop.org/show_bug.cgi?id=7770 Bug#406373: xserver-xorg-video-ati: [ia64] No direct rendering w/ Radeon R300 [FireGL X1] Noted your statement that Bug has been forwarded to https://bugs.freedesktop.org/show_bug.cgi?id=7770. > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#411179: xserver-xorg-video-ati: R128 dri does not work on slot-loading iMac
Hi Frederic, Do you still experience this problem regarding DRI not working on slot-loading iMac with a ATI R128 board? Could you try with xserver-xorg-video-ati 1:6.6.192-1 currently in experimental? Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#422230: xserver-xorg-video-ati: [ati/radeon] crash when using xinerama
Hi Arnaud, Does this crash of the server when using xinerama still occurs? Could you try with xserver-xorg-video-ati 1:6.6.192-1 currently in experimental? Note that if you want to play with multiple-heads and so, RandR 1.2 is getting strong work in the ATI driver upstream. It means you will be able to place/resize outputs dynamically soon (not in 6.6.192 unfortunately). Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#411716: installation almost succeeds - is X misconfigured or broken?
Hi Hendrik, Do you still have problems getting the X server to work with the ATI driver on your machine? I don't see anything obviously wrong in your config. Does switching to the "vesa" driver instead of "ati" help? Also, you might want to try with the "ati" driver from package xserver-xorg-video-ati 1:6.6.192-1 currently in experimental. Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#426422: xserver-xorg-video-ati: X freezes with arkhart and vegastrike with version 1:6.6.192-1 (build from experim source)
Alban Browaeys wrote: >> Does it happen with driver 6.6.3 or 6.6.191 (available from >> snapshot.debian.net)? Or with another xserver-xorg-core? >> > > Yes it does. In fact with previous versions failure happens sooner > and for more games (torcs, nexuiz crash too with them). > > What could I do other than the not so useful backtrace ? > Which mesa are you using? 6.5.2 from unstable? Could you try with 6.5.3 from experimental? (at least libgl1-mesa-dri) thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#422777: bug #422777 prematurely closed
* Debian Bug Tracking System <[EMAIL PROTECTED]> [2007-06-24 01:36]: > This is an automatic notification regarding your Bug report #422777: > xserver-xorg: MergedFB CRT2 Clone stopped working after reboot, > which was filed against the xserver-xorg-video-ati package. > > It has been closed by Brice Goglin <[EMAIL PROTECTED]>. > > Their explanation is attached below. If this explanation is > unsatisfactory and you have not received a better one in a separate > message then please contact Brice Goglin <[EMAIL PROTECTED]> > by replying to this email. > > Debian bug tracking system administrator > (administrator, Debian Bugs database) > Subject: Bug#422602: xserver-xorg: dualhead with ati broken > From: Brice Goglin <[EMAIL PROTECTED]> > Date: Sun, 24 Jun 2007 01:34:00 +0200 > To: [EMAIL PROTECTED] > > Version: 1:6.6.192-1 > > Finally marking this bug as done since 6.6.191 or 6.6.192 seems to > make everybody happy. > > Brice [Sorry if you get this twice.] Unfortunately, 1:6.6.192-1 doesn't make me happy. After I received the "bug closed" email, I updated xserver-xorg-video-ati to 1:6.6.192-1 from experimental (and all other xorg packages installed to the latest versions in unstable). And now I have exactly the same problem [bug #422777] again. Please let me know if you need more information (e.g. xorg.conf or Xorg.0.log). [In the mean time, I guess I'll have to pin xserver-xorg-core to stable.] - Felix -- Felix C. Stegerman <[EMAIL PROTECTED]> http://obfusk.net ~ "Any sufficiently advanced bug is indistinguishable from a feature." ~ -- R. Kulawiec ~ vim: set ft=mail tw=70 sw=2 sts=2 et: pgpfmwm0SM5il.pgp Description: PGP signature
