Bug#385909: pyversions: command not found
On Sun, 03 Sep 2006, Steve Langasek wrote:
> On Sun, Sep 03, 2006 at 11:38:19PM +0200, Julien Danjou wrote:
> > Suggested packages:
> > python-doc python-profiler
> > The following NEW packages will be installed:
> > python-minimal
> > The following packages will be upgraded:
> > python
> > 1 upgraded, 1 newly installed, 0 to remove and 212 not upgraded.
> > 221 not fully installed or removed.
> > Need to get 0B/152kB of archives.
> > After unpacking 119kB of additional disk space will be used.
> > (Reading database ... 142617 files and directories currently installed.)
> > Preparing to replace python 2.3.5-5 (using .../python_2.4.3-11_all.deb)
> > running python pre-rtupdate hooks for python2.4...
> > /usr/share/python/runtime.d/python-gnome2.rtupdate: line 4: pyversions:
> > command not found
>
> Whoops, apparently there's a whole in python policy, packages which use
> pyversions (which is pretty much anything doing bytecompiling, right?) need
> a dependency on python (>= 2.3.5-6)...
Pyversions is mainly used at build-time and not at installation time.
Whatever requires pyversions (and in this case python-gnome2) should be
depending on the first version of python that provides it (and now the
good question: how do you do that while still using ${python:Depends}?).
Cheers,
--
Raphaël Hertzog
Premier livre français sur Debian GNU/Linux :
http://www.ouaza.com/livre/admin-debian/
Bug#188677: it`s all about SOFT Cornelia
The three brand name drugs available to improve sex lives are now available in generic form at a significantly lower price. Pick up the one that is best for you at: http://zjr.com>.nsrqge1wzvfd3edi88dsb8jd888.semiringml.cc stiff possible -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385909: pyversions: command not found
On Mon, Sep 04, 2006 at 08:41:55AM +0200, Raphael Hertzog wrote:
> On Sun, 03 Sep 2006, Steve Langasek wrote:
> > On Sun, Sep 03, 2006 at 11:38:19PM +0200, Julien Danjou wrote:
> > > Suggested packages:
> > > python-doc python-profiler
> > > The following NEW packages will be installed:
> > > python-minimal
> > > The following packages will be upgraded:
> > > python
> > > 1 upgraded, 1 newly installed, 0 to remove and 212 not upgraded.
> > > 221 not fully installed or removed.
> > > Need to get 0B/152kB of archives.
> > > After unpacking 119kB of additional disk space will be used.
> > > (Reading database ... 142617 files and directories currently installed.)
> > > Preparing to replace python 2.3.5-5 (using .../python_2.4.3-11_all.deb)
> > > running python pre-rtupdate hooks for python2.4...
> > > /usr/share/python/runtime.d/python-gnome2.rtupdate: line 4: pyversions:
> > > command not found
> > Whoops, apparently there's a whole in python policy, packages which use
hole
> > pyversions (which is pretty much anything doing bytecompiling, right?) need
> > a dependency on python (>= 2.3.5-6)...
> Pyversions is mainly used at build-time and not at installation time.
> Whatever requires pyversions (and in this case python-gnome2) should be
> depending on the first version of python that provides it (and now the
> good question: how do you do that while still using ${python:Depends}?).
By depending on python (>= 2.3.5-6), ${python:Depends}, which will duplicate
a dependency but still work?
--
Steve Langasek Give me a lever long enough and a Free OS
Debian Developer to set it on, and I can move the world.
[EMAIL PROTECTED] http://www.debian.org/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385935: Proposal for virtual package 'stardict' and 'stardict-dictdata'
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 retitle 385935 debian-policy: Request for the 'stardict' virtual package. thanks. Roy Hiu Yeung Chan wrote: > I would like notice you that I already request a virtual-package > "stardict-dictionary" > which mean any dictionary in stardict format years ago. and It already > in debian-policy. > I recommend you use stardict-dictionary instead of stardict-dictdata. Thanks for the notice, I am changing the title of the wishlist bug to debian-policy. - -Andrew -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFE+88QnQYz4bYlCYURAm7TAJ4qAbKSiAwSqV4oC7apaxGJbUpzPgCdGME3 DqnSax0ubB39XFU+oYL400I= =fIId -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#383034: libcairo2: every gtk app crashes when runs on remote
I was idem problem. I use vncserver and gtk application crash with 1.2.2. When I downgrade to 1.0.4 everything works fine. Marcelo Monteiro -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385944: mdadm: init scripts called directly?
Package: mdadm Version: 2.5.2-7 Severity: normal Yodel! Are you calling mdadm's init script directly instead of via invoke-rc.d from postinst? (I'm just guessing - make-fai-nfsroot fails, apparently because mdadm's init script is being called, which should obviously not happen since I'm preparing an nfsroot. Haven't investigated as I don't use sw-raid in this setup. Sorry for the sloppy bug report - consquently, feel free to just close.) cheers -- vbi -- ... or were you driving the PONTIAC that HONKED at me in MIAMI last Tuesday? pgp7emE601n83.pgp Description: PGP signature
Bug#139749: **SPAM** How to double your company recognition on the market?
In der Zeit vom 19.08.-03.09.2006 bin ich nicht am Institut erreichbar. In dringenden Fällen wenden Sie sich bitte an meinen Kollegen André Horstkötter (Tel. 0251-8321940, Email: [EMAIL PROTECTED]). Mit freundlichem Gruß Jörg Schmidt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#334320: sparc FTBFS
02-alignment-hppa-sparc.dpatch from the tla package fixes the sparc bus error problem in bazaar. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385788: [pkg-horde] Bug#385788: Fails to unencrypt admin passwd from servers.php
Hi
This is fixed in the version in unstable/testing. I do not think
it is severe enough for a stable update.
Regards,
// Ola
On Sun, Sep 03, 2006 at 12:27:07AM -0400, sam wrote:
> Package: imp4
> Version: 4.0.2-2
>
> When trying to administer IMAP users by filing in the "admin" array
> in servers.php, an error is generated when going to "Users" under the
> Horde "Administration" tab. The problem appears to be that the
> password is encrypted in the session, but not decrypted for login to
> the IMAP server for administration purposes. (Regular user IMAP
> login does decrypt, and so works fine.)
>
> The fix is easy. Change /usr/share/horde3/imp/lib/api.php line 265 from
>
> $params['admin_password'] = $params['password'];
>
> to
>
> $params['admin_password'] = Secret::read(Secret::getKey('imp'),
> $params['password']);
>
>
> This change appears to have always been in upstream, so I'm not sure
> how the bug crept in here. See http://cvs.horde.org/diff.php?
> r1=1.86&r2=1.87&f=imp%2Flib%2Fapi.php
>
>
> ___
> pkg-horde-hackers mailing list
> [EMAIL PROTECTED]
> http://lists.alioth.debian.org/mailman/listinfo/pkg-horde-hackers
>
--
- Ola Lundqvist ---
/ [EMAIL PROTECTED] Annebergsslingan 37 \
| [EMAIL PROTECTED] 654 65 KARLSTAD |
| +46 (0)54-10 14 30 +46 (0)70-332 1551 |
| http://www.opal.dhs.org UIN/icq: 4912500 |
\ gpg/f.p.: 7090 A92B 18FE 7994 0C36 4FE4 18A1 B1CF 0FE5 3DD9 /
---
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385792: consider including gromacs stresscpu
reassign 385792 wnpp retitle 385792 RFP: gromacs stresscpu severity 385792 wishlist thanks dean gaudet wrote: Package: cpuburn Version: 1.4-23 there's another burn-in program which is based on gromacs inner loops (such as those used in [EMAIL PROTECTED]) which tends to drive up cpu temperatures even more than the programs already in cpuburn package. it has the additional advantage of checking its consistency as it goes. http://www.gromacs.org/contributed_by_users/task,doc_details/gid,14/ its license isn't specified explicitly but gromacs itself is GPL and stresscpu is a derived work... so it must be GPL. Well on one hand it is a derived work, but on the other hand, this program is not linked to gromacs and can run independently. This reasoning is not enought to know the license of this software. There is not even the name of the author in the sources! Care to contact the author of the software to clarify that ? please consider including it in cpuburn package... This has to be a separate package. cpuburn and stresscpu are different programs, with different source tarballs, it's not a good idea to put both of them in the same debian package. I am therefore reassigning this bug to wnpp. -- .''`. Aurelien Jarno | GPG: 1024D/F1BCDB73 : :' : Debian developer | Electrical Engineer `. `' [EMAIL PROTECTED] | [EMAIL PROTECTED] `-people.debian.org/~aurel32 | www.aurel32.net -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385945: boson: crashes on singleplayer game start
Package: boson Version: 0.12dfsg1-1 Severity: grave Justification: renders package unusable Hello, While trying to understand why the dependency on libvorbis-dev was added (bug #385189) I intended to try to "break the dependency" on the -dev package and have only the regular library package. to see is I could reproduce the bug. I couldn't since the game crashed when trying to start the game in single player mode. Backtrace (as is generated by the crash handling application of KDE) is attached (I had the boson-dbg package installed). -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (900, 'unstable'), (100, 'experimental') Architecture: powerpc (ppc) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16.17-merci Locale: LANG=ro_RO.UTF-8, LC_CTYPE=ro_RO.UTF-8 (charmap=UTF-8) Versions of packages boson depends on: ii boson-data 0.12-1 Datas for Boson, a real-time strat ii kdelibs4c2a 4:3.5.4-3 core libraries and binaries for al ii libart-2.0-2 2.3.17-1Library of functions for 2D graphi ii libc62.3.6.ds1-4 GNU C Library: Shared libraries ii libgcc1 1:4.1.1-13 GCC support library hi libice6 1:1.0.0-3 X11 Inter-Client Exchange library ii libopenal0a 1:0.0.8-1 OpenAL is a portable library for 3 ii libqt3-mt3:3.3.6-4 Qt GUI Library (Threaded runtime v hi libsm6 1:1.0.1-2 X11 Session Management library ii libstdc++6 4.1.1-13The GNU Standard C++ Library v3 ii libvorbis-dev1.1.2-1 The Vorbis General Audio Compressi ii libx11-6 2:1.0.0-8 X11 client-side library hi libxext6 1:1.0.1-2 X11 miscellaneous extension librar hi libxmu6 1:1.0.2-2 X11 miscellaneous utility library hi libxrandr2 2:1.1.0.2-4 X11 RandR extension library ii python2.42.4.3-8 An interactive high-level object-o Versions of packages boson recommends: pn boson-music(no description available) -- no debconf information Using host libthread_db library "/lib/tls/libthread_db.so.1". [Thread debugging using libthread_db enabled] [New Thread 805516384 (LWP 7361)] [New Thread 816002272 (LWP 7362)] [KCrash handler] #5 0x0f6e8fac in raise () from /lib/tls/libc.so.6 #6 0x0f6eaa4c in abort () from /lib/tls/libc.so.6 #7 0x0f6e1318 in __assert_fail () from /lib/tls/libc.so.6 #8 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #9 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #10 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #11 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #12 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #13 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #14 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #15 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #16 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #17 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #18 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #19 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #20 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #21 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #22 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #23 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #24 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #25 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #26 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #27 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #28 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #29 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #30 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #31 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #32 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #33 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #34 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #35 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #36 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #37 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #38 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #39 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #40 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #41 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #42 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #43 0x0de59a18 in __glXPushArrayState () from /usr/lib/libGL.so.1 #44 0x0de59a18 in __glXP
Bug#385948: k3b crash while exiting while heaving meany projects/tabs?
Package: k3b Version: 0.12.15-2 Severity: normal K3B crashed while exiting it. There where several tabs (projects) opened. All where DVD data. Perhaps the reason was that one or two from 5 tabs where refering to a directory that was deleted outside of k3b before closing k3b. But perhaps not, I dunno. ii k3b 0.12.15-2 ii k3b-i18n 0.12.15-1 rc k3blibs 0.12.8-1+b1 ii libk3b2 0.12.15-2 (no debugging symbols found) Using host libthread_db library "/lib/tls/i686/cmov/libthread_db.so.1". (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [Thread debugging using libthread_db enabled] [New Thread -1235278144 (LWP 17365)] 0xb7f2f792 in _dl_sysinfo_int80 () from /lib/ld-linux.so.2 #0 0xb7f2f792 in _dl_sysinfo_int80 () from /lib/ld-linux.so.2 #1 0xb66aabb6 in nanosleep () from /lib/tls/i686/cmov/libc.so.6 #2 0xb66aa9b3 in sleep () from /lib/tls/i686/cmov/libc.so.6 #3 0xb74c0ace in KCrash::startDrKonqi () from /usr/lib/libkdecore.so.4 #4 0xb74ecc74 in KCrash::defaultCrashHandler () from /usr/lib/libkdecore.so.4 #5 0xb6642768 in killpg () from /lib/tls/i686/cmov/libc.so.6 #6 0xb6643f9b in abort () from /lib/tls/i686/cmov/libc.so.6 #7 0xb6679157 in __fsetlocking () from /lib/tls/i686/cmov/libc.so.6 #8 0xb667f727 in malloc_usable_size () from /lib/tls/i686/cmov/libc.so.6 #9 0xb667fbc2 in free () from /lib/tls/i686/cmov/libc.so.6 #10 0xb6835051 in operator delete () from /usr/lib/libstdc++.so.6 #11 0x0817e130 in K3bDataUrlAddingDialog::staticMetaObject () #12 0xb6e9f61d in QWidget::~QWidget () from /usr/lib/libqt-mt.so.3 #13 0xb6f2668b in QFrame::~QFrame () from /usr/lib/libqt-mt.so.3 #14 0xb6f9fd66 in QScrollView::~QScrollView () from /usr/lib/libqt-mt.so.3 #15 0xb6f6dc87 in QListView::~QListView () from /usr/lib/libqt-mt.so.3 #16 0xb77c5c7d in KListView::~KListView () from /usr/lib/libkdeui.so.4 #17 0xb7e6b688 in K3bListView::~K3bListView () from /usr/lib/libk3b.so.2 #18 0x0815f338 in K3bDataFileView::staticMetaObject () #19 0xb6e9f61d in QWidget::~QWidget () from /usr/lib/libqt-mt.so.3 #20 0xb6f2668b in QFrame::~QFrame () from /usr/lib/libqt-mt.so.3 #21 0xb6faaf1d in QSplitter::~QSplitter () from /usr/lib/libqt-mt.so.3 #22 0xb6e9f61d in QWidget::~QWidget () from /usr/lib/libqt-mt.so.3 #23 0x08179aa1 in K3bView::staticMetaObject () #24 0x081671c9 in K3bDataPropertiesDialog::staticMetaObject () #25 0x0816f09e in K3bBootImageView::staticMetaObject () #26 0x0809a2ae in QValueList::detachInternal () #27 0x0809fcc0 in QValueList::detachInternal () #28 0xb7815ec3 in KMainWindow::closeEvent () from /usr/lib/libkdeui.so.4 #29 0xb6ea10f7 in QWidget::event () from /usr/lib/libqt-mt.so.3 #30 0xb6f72bfc in QMainWindow::event () from /usr/lib/libqt-mt.so.3 #31 0xb6dfc87a in QApplication::internalNotify () from /usr/lib/libqt-mt.so.3 #32 0xb6dfd5f5 in QApplication::notify () from /usr/lib/libqt-mt.so.3 #33 0xb759024e in KApplication::notify () from /usr/lib/libkdecore.so.4 #34 0xb6d8e001 in QApplication::sendEvent () from /usr/lib/libqt-mt.so.3 #35 0xb6ea0093 in QWidget::close () from /usr/lib/libqt-mt.so.3 #36 0xb6d7c468 in QETWidget::translateCloseEvent () from /usr/lib/libqt-mt.so.3 #37 0xb6d81f07 in QApplication::x11ClientMessage () from /usr/lib/libqt-mt.so.3 #38 0xb6d884a8 in QApplication::x11ProcessEvent () from /usr/lib/libqt-mt.so.3 #39 0xb6da12a2 in QEventLoop::processEvents () from /usr/lib/libqt-mt.so.3 #40 0xb6e15255 in QEventLoop::enterLoop () from /usr/lib/libqt-mt.so.3 #41 0xb6dfb3b9 in QApplication::enter_loop () from /usr/lib/libqt-mt.so.3 #42 0xb70197c4 in QDialog::exec () from /usr/lib/libqt-mt.so.3 #43 0x0818105d in K3bDataUrlAddingDialog::staticMetaObject () #44 0x08161305 in K3bDataFileView::staticMetaObject () #45 0x081618c0 in K3bDataFileView::staticMetaObject () #46 0xb6e6654b in QObject::activate_signal () from /usr/lib/libqt-mt.so.3 #47 0xb77d0302 in KListView::dropped () from /usr/lib/libkdeui.so.4 #48 0xb77d0421 in KListView::contentsDropEvent () from /usr/lib/libkdeui.so.4 #49 0xb6f9ade9 in QScrollView::viewportDropEvent () from /usr/lib/libqt-mt.so.3 #50 0xb6f9d68b in QScrollView::eventFilter () from /usr/lib/libqt-mt.so.3 #51 0xb6f61b8f in QListView::eventFilter () from /usr/lib/libqt-mt.so.3 #52 0xb7e6df23 in K3bListView::eventFilter () from /usr/lib/libk3b.so.2 #53 0xb6e636b0 in QObject::activate_filters () from /usr/lib/libqt-mt.so.3 #54 0xb6e6372e in QObject::event () from /usr
Bug#314847: Same problem with maildrop 2.0.2-5
Sorry for late response but I decided to have a computer-free weekend. :-) * Josip Rodin <[EMAIL PROTECTED]> wrote: > Maybe the severity of these problems for upgraders warrants a debconf note, > even. Here are my current results and to make it short: My setup works again. However, it included some manual interaction: 1) I had to install `courier-authdaemon' manually. There were no dependencies on this package. 2) I had to `chmod a+x /var/run/courier/authdaemon' manually to make it work as Micha suggested. 3) I still must use `mailbox_command = /usr/bin/maildrop -d "$USER" -f "$SENDER" "$EXTENSION"' in /etc/postfix/main.cf to make everything work. If I just use `mailbox_command = /usr/bin/maildrop -f "$SENDER" "$EXTENSION"' (as Josip suggested) mails will not be delivered to my maildir, even with courier-authdaemon installed or with the additional modified permissions at /var/run/courier/authdaemon. When courier-authdaemon is installed and permissions on /var/run/courier/authdaemon are modified BUT `-d "$USER"' is removed I get the following error in mail.info: , | status=deferred (temporary failure. Command output: /usr/bin/maildrop: Unable to open filter file, errno=2. ) ` When I add `-d "$USER"' again my mails will be delivered. I guess that steps (1) and (2) from above are essential for not breaking setups on upgrades. On the other hand I'm quite unhappy that I have to run a daemon on my machine just for making my MDA work. Whereas I have courier-imap running at home (and therefore courier-authdaemon, too) I have neither POP3 nor IMAP running here on my lab PC and deliver directly to maildirs where my Gnus reads from. I preferred the old solution (i.e. maildrop 1.x) where no courier-authdaemon was needed. Regards, Marcus -- Institut für Organische Chemie der RWTH Aachen Landoltweg 1, 52074 Aachen - Deutschland My PGP-key 0xBAB58229 is available on public keyservers
Bug#385519: [Pkg-octave-devel] Bug#385519: octaviz: please migrate to VTK 5
* Laurent Bonnaud <[EMAIL PROTECTED]> [2006-09-02 23:48]: > I'm going to raise the severity of this bug because: > > # apt-get install octaviz > [...] > The following packages have unmet dependencies: > octaviz: Depends: libvtk4c2a (>= 4.4.2) but it is not installable > E: Broken packages This was the right thing to do. Unfortunately, we are lacking manpower right now to deal withe the octaviz package, which needs to be rebuilt against VTK 5, preferably from the CVS sources. Take this as a RFH (request for help). Laurent, if you have interest in helping us, please drop me a note and I will add you to the DOG. -- Rafael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#384945: texlive system will not install
Ross Boylan <[EMAIL PROTECTED]> wrote: > Package: texlive > Version: 2005.dfsg.1-1 > Severity: normal Hi all, after reading through the bug log and what you've found out so far, it seems to me that there are a couple of issues: > The various tex's have a checkered history on this system. I think I > first tried texlive, found it was incompatible with some other stuff, > removed it, and installed tetex. > > In the recent upgrade to KDE 3.5.4 kdegraphics seemed to require texlive > packages, but these failed with an error that a file was owned by two > packages, and that I should remove texlive. I attempted to do so. > > I was able to proceed with the dist-upgrade. Then I upgraded > kdegraphics, which no longer seemed to require texlive. 1. Why does or did kdegraphics require texlive, and is not satisfied with tetex? > Then I attempted to install texlive, leading to the kind of errors > seen in the attached log. > > -- Package-specific info: > ## > List of ls-R files > > lrwxrwxrwx 1 root root 27 2006-08-27 23:16 /usr/share/texmf-texlive/ls-R -> > /var/lib/texmf/ls-R-TEXLIVE 2. It is strange that there is only one ls-R file. Please send us the output of dpkg -l tex-common kpsewhich --var-value='TEXMF' grep '^TEXMF =' /etc/texmf/texmf.cnf > ## > Config files > total 20 > drwx-- 2 ross ross 256 2006-06-26 09:18 Desktop > drwxr-xr-x 3 ross ross 256 2006-02-15 21:18 download > drwx-- 2 ross ross 48 2006-02-14 10:42 Mail > -rw-r--r-- 1 root root 1828 2006-03-31 21:14 pci > -rw--- 1 ross ross0 2006-04-16 15:21 postponed > drwxr-xr-x 2 ross ross 80 2006-06-17 16:16 RCS > -rw--- 1 ross ross 8612 2006-07-22 12:13 sent > -rw-r--r-- 1 ross ross 850 2006-06-25 23:18 testspam 3. I've never seen such an output in a texlive bugreport, but then I haven't seen lots of them, being focused on teTeX until recently. Is this expected? > Versions of packages texlive depends on: > pn texlive-context(no description available) > pn texlive-doc-en (no description available) > pn texlive-fonts-recommended (no description available) > pn texlive-latex-base | tetex-ba (no description available) > pn texlive-latex-recommended (no description available) > > texlive recommends no packages. 4. All texlive packages that do not directly depend on tex-common should have a reportbug control file that has a "report-with: tex-common" statement, and maybe more packages. 5. As far as I understood, dvipdfmx calls mktexlsr unconditionally, this should probably be a separate bug. [ from a later mail by Ross ] > dpkg: error processing preview-latex-style (--remove): > Package is in a very bad inconsistent state - you should > reinstall it before attempting a removal. > (Reading database ... terminate called after throwing an instance of > 'std::logic_error' > what(): basic_string::_S_construct NULL not valid > Aborted 6. We seem to have exposed a bug in aptitude - or maybe in dpkg. To find out which, please try the following: strace -o aptitude.trace aptitude -q install # or any commands that trigger that error dpkg --remove preview-latex-style and if the latter gives the same error, strace -o dpkg.trace dpkg --remove preview-latex-style and send the resulting files dpkg.trace and aptitude.trace. 7. Finally, try to fix the problems by downloading a preview-latex-style deb from testing or unstable and doing dpkg --force-depends --install dpkg --purge preview-latex-style Regards, Frank -- Frank Küster Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich Debian Developer (teTeX/TeXLive)
Bug#385356: lablgtksourceview: FTBFS: relocation R_X86_64_32 against `ml_table_source_search_flag' can not be used when making a shared object
tags 385356 + pending thanks On Sat, Sep 02, 2006 at 06:11:10AM +0200, Julien Cristau wrote: > Actually -fPIC is used inconsistently. It is part of the compile flags, > but not used at link time, which (I think) causes this FTBFS. The > attached patch should fix this. Tnx for the patch. Actually, the one I applied to the package came from Maxence Guesdon, and consists in letting ocamlc compile all .c files, so that -fPIC is (consistently) used depending on the architecture where the package is being built. > By the way, lablgtksourceview is currently a native package; is this > intended? Yes. I used to follow the scheme x.y.z-k even for native debian packages. Incrementing only the k component when changes where applied only to the debian packaging, not inducing a new upstream release. Nowadays it seems that the debian packaging tools are more and more discouraging this practice (see the quite new lintian warning); I will eventually quit this practice ..., even I don't think there's anything wrong with that. Cheers. -- Stefano Zacchiroli -*- Computer Science PhD student @ Uny Bologna, Italy [EMAIL PROTECTED],debian.org,bononia.it} -%- http://www.bononia.it/zack/ If there's any real truth it's that the entire multidimensional infinity of the Universe is almost certainly being run by a bunch of maniacs. -!- signature.asc Description: Digital signature
Bug#385947: mysql-server-5.0: typo in datadir partition size test
Package: mysql-server-5.0
Version: 5.0.24a-1
Severity: normal
--- mysql.orig 2006-09-04 09:41:14.0 +0200
+++ mysql 2006-09-04 09:41:32.0 +0200
@@ -45,7 +45,7 @@
fi
datadir=`mysqld_get_param datadir`
- if LC_ALL=C BLOCKSIZE= df --portability $datadir/. | tail -n 1 | awk '{ exit
($4>4096) }'; then
+ if LC_ALL=C BLOCK_SIZE= df --portability $datadir/. | tail -n 1 | awk '{
exit ($4>4096) }'; then
/bin/echo "ERROR: The partition with $datadir is too full!" | $ERR_LOGGER
-s
exit 1
fi
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-686
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Versions of packages mysql-server-5.0 depends on:
ii adduser 3.97 Add and remove users and groups
ii debconf [debconf-2.0] 1.5.3Debian configuration management sy
ii libc6 2.3.6.ds1-4 GNU C Library: Shared libraries
ii libdbi-perl 1.52-1 Perl5 database interface by Tim Bu
ii libgcc1 1:4.1.1-13 GCC support library
ii libmysqlclient15off 5.0.24a-1mysql database client library
ii libncurses5 5.5-2Shared libraries for terminal hand
ii libreadline55.1-7GNU readline and history libraries
ii libstdc++6 4.1.1-13 The GNU Standard C++ Library v3
ii libwrap07.6.dbs-11 Wietse Venema's TCP wrappers libra
ii mysql-client-5.05.0.24a-1mysql database client binaries
ii mysql-common5.0.24a-1mysql database common files (e.g.
ii passwd 1:4.0.18.1-2 change and administer password and
ii perl5.8.8-6.1Larry Wall's Practical Extraction
ii psmisc 22.3-1 Utilities that use the proc filesy
ii zlib1g 1:1.2.3-13 compression library - runtime
Versions of packages mysql-server-5.0 recommends:
ii mailx1:8.1.2-0.20050715cvs-1 A simple mail user agent
-- debconf information:
mysql-server-5.0/really_downgrade: false
mysql-server-5.0/start_on_boot: true
mysql-server-5.0/nis_warning:
mysql-server-5.0/postrm_remove_databases: false
mysql-server-5.0/no_upgrade_with_isam_tables:
mysql-server-5.0/mysql_install_db_notes:
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385899: ltsp-build-client: Unrecognized `--root' option and manpage update
On Sun, Sep 03, 2006 at 08:09:32PM -0700, Vagrant Cascadian wrote: > with the new plugins system, it may be difficult to document all > possible options in the man page, especially since other packages could > add options, and options available for debian and ubuntu differ. but the > core functionality should be properly documented in the manpage, and > maybe we can refer to (and improve) the --help output for a complete > list of options? Yeah, that would be fine. > thanks for your patch. i will try and apply it or something similar > (though in the future, please submit patches using "diff -u"). Oups. I always use "-u" (see the previous patch), but for some reason I forgot about it this time. Here is the patch again. --- ltsp-build-client.orig.82006-09-04 01:51:48.0 +0200 +++ ltsp-build-client.8 2006-09-04 01:51:48.0 +0200 @@ -3,7 +3,7 @@ ltsp-build-client \(em Builds an LTSP client system for use with the LTSP server .SH "SYNOPSIS" .PP -\fBltsp-build-client\fR [\-\-root ] [\-\-dist ] [\-\-components ] [\-\-mirror ] [\-\-extra-mirror ] [\-\-security-mirror ] [\-\-exclude ] [\-\-early-packages ] [\-\-late-packages ] [\-\-serial-console ] [\-\-arch ] [\-\-debconf-seeds ] [\-\-apt-keys ] [\-\-help ] +\fBltsp-build-client\fR [\-\-base ] [\-\-dist ] [\-\-components ] [\-\-config ] [\-\-mirror ] [\-\-early-mirror ] [\-\-extra-mirror ] [\-\-security-mirror ] [\-\-exclude ] [\-\-early-packages ] [\-\-late-packages ] [\-\-serial-console ] [\-\-arch ] [\-\-debconf-seeds ] [\-\-prompt-rootpass ] [\-\-apt-keys ] [\-\-accept-unsigned-packages ] [\-\-debug ] [\-\-help ] .SH "DESCRIPTION" .PP \fBltsp-build-client\fR uses the ubuntu archive mirrors in order to @@ -13,7 +13,7 @@ can be overridden using the command line options. Visit http://www.ltsp.org for more information .SH "OPTIONS" -.IP "\fB\-\-root\fP \fIrootpath\fR" 10 +.IP "\fB\-\-base\fP \fIbasepath\fR" 10 Sets the default path for the ltsp chroot to be installed into, default /opt/ltsp/\fBARCH\fP .IP "\fB\-\-dist\fP \fIdistribution\fR" 10 @@ -24,11 +24,20 @@ Allows a list of archive components to be chosen for download, default main restricted +.IP "\fB\-\-config\fP \fIfile\fR" 10 +Load a user specific configuration file + .IP "\fB\-\-mirror\fP \fImirror_url\fR" 10 Allows a local Ubuntu mirror to be chosen for a faster download, urls like file://cdrom can also be specified here. default http://archive.ubuntu.com/ubuntu +.IP "\fB\-\-early-mirror\fP \fImirror_url dist components\fR" 10 +Adds a mirror which takes priority over the default mirror. This option +can also have dist and component variables associated as demonstrated +above. If no dist and components are specified the defaults are used. +Urls like file://cdrom can also be specified here. + .IP "\fB\-\-extra-mirror\fP \fImirror_url dist components\fR" 10 Sets the inclusion of an extra mirror if downloading pacakges from an alternative location. This option can also have dist and component @@ -62,9 +71,18 @@ .IP "\fB\-\-debconf-seeds\fP" 10 Loads the debconf pre-seeding files into the new chroot environment +.IP "\fB\-\-prompt-rootpass\fP" 10 +Prompt to set the root password, defaults to disabled + .IP "\fB\-\-apt-keys\fP \fIkey1 key2\fR" 10 Specifies keys to add to the apt keyring +.IP "\fB\-\-accept-unsigned-packages\fP" 10 +Allow unsigned packages during install + +.IP "\fB\-\-debug\fP" 10 +Enable debug support + .IP "\fB\-\-help\fP" 10 Displays the ltsp-build-client help message
Bug#385946: fmit: crashes at startup
Package: fmit Version: 0.96.5-1 Severity: grave Justification: renders package unusable Hi, fmit segfaults at startup, before any application window is displayed on screen: $ fmit Free Music Instrument Tuner version 0.96.5 built at Sep 2 2006 15:25:55 Install directory '/usr' CaptureThread: INFO: Built in transports CaptureThread: INFO:JACK unavailable CaptureThread: INFO:ALSA available CaptureThread: INFO: Auto detecting a working transport ... using ALSA CaptureThread: INFO: ALSA: try to set format to Signed 16 bit Little Endian success CaptureThread: WARNING: ALSA: cannot set channel count to one. channels will be mixed CaptureThread: INFO: ALSA: try to set sampling rate to 96000 failed CaptureThread: INFO: ALSA: try to set sampling rate to 48000 success CaptureThread: WARNING: ALSA: cannot set channel count to one. channels will be mixed Segmentation fault Running with gdb shows that the stacktrace at crash time is the following: #0 0xe410 in __kernel_vsyscall () #1 0xa71e6821 in raise () from /lib/tls/i686/cmov/libc.so.6 #2 0xa71e7fb9 in abort () from /lib/tls/i686/cmov/libc.so.6 #3 0xa721bc4a in __fsetlocking () from /lib/tls/i686/cmov/libc.so.6 #4 0xa72234df in mallopt () from /lib/tls/i686/cmov/libc.so.6 #5 0xa7223582 in free () from /lib/tls/i686/cmov/libc.so.6 #6 0xa7d7b9cd in XFree () from /usr/lib/libX11.so.6 #7 0xa7e806e0 in __glXSendLargeImage () from /usr/lib/libGL.so.1 #8 0xa7e5ad0a in glGetString () from /usr/lib/libGL.so.1 #9 0xa7e66aa1 in glXMakeCurrentReadSGI () from /usr/lib/libGL.so.1 #10 0xa7e66b43 in glXMakeCurrent () from /usr/lib/libGL.so.1 #11 0xa798e0c5 in QGLContext::makeCurrent () from /usr/lib/libqt-mt.so.3 #12 0xa798a3be in QGLWidget::makeCurrent () from /usr/lib/libqt-mt.so.3 #13 0xa798f0a3 in QGLWidget::resizeEvent () from /usr/lib/libqt-mt.so.3 #14 0xa7736976 in QWidget::event () from /usr/lib/libqt-mt.so.3 #15 0xa7697aea in QApplication::internalNotify () from /usr/lib/libqt-mt.so.3 #16 0xa769a49a in QApplication::notify () from /usr/lib/libqt-mt.so.3 #17 0xa762b3d1 in QApplication::sendEvent () from /usr/lib/libqt-mt.so.3 #18 0xa7698b12 in QApplication::sendPostedEvents () from /usr/lib/libqt-mt.so.3 #19 0xa7738cef in QWidget::show () from /usr/lib/libqt-mt.so.3 #20 0xa7735b5c in QWidget::showChildren () from /usr/lib/libqt-mt.so.3 #21 0xa7738f76 in QWidget::show () from /usr/lib/libqt-mt.so.3 #22 0xa7735b5c in QWidget::showChildren () from /usr/lib/libqt-mt.so.3 #23 0xa7738f76 in QWidget::show () from /usr/lib/libqt-mt.so.3 #24 0xa780b660 in QMainWindow::show () from /usr/lib/libqt-mt.so.3 #25 0x08065148 in QLabel::metaObject () #26 0xa71d2ea8 in __libc_start_main () from /lib/tls/i686/cmov/libc.so.6 #27 0x08055531 in ?? () -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages fmit depends on: ii freeglut32.4.0-5 OpenGL Utility Toolkit ii libasound2 1.0.11-7ALSA library ii libc62.3.6.ds1-4 GNU C Library: Shared libraries ii libgcc1 1:4.1.1-13 GCC support library ii libgl1-mesa-glx [libgl1] 6.4.2-1.1 A free implementation of the OpenG ii libglu1-mesa [libglu1] 6.4.2-1.1 The OpenGL utility library (GLU) ii libice6 1:1.0.0-3 X11 Inter-Client Exchange library ii libjack0.100.0-0 0.101.1-1 JACK Audio Connection Kit (librari ii libqt3-mt3:3.3.6-4 Qt GUI Library (Threaded runtime v ii libsm6 1:1.0.1-2 X11 Session Management library ii libstdc++6 4.1.1-13The GNU Standard C++ Library v3 ii libx11-6 2:1.0.0-8 X11 client-side library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxi6 1:1.0.1-3 X11 Input extension library ii libxmu6 1:1.0.2-2 X11 miscellaneous utility library ii libxt6 1:1.0.2-2 X11 toolkit intrinsics library fmit recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385909: pyversions: command not found
Le dimanche 03 septembre 2006 à 18:48 -0500, Steve Langasek a écrit : > On Sun, Sep 03, 2006 at 11:38:19PM +0200, Julien Danjou wrote: > > Suggested packages: > > python-doc python-profiler > > The following NEW packages will be installed: > > python-minimal > > The following packages will be upgraded: > > python > > 1 upgraded, 1 newly installed, 0 to remove and 212 not upgraded. > > 221 not fully installed or removed. > > Need to get 0B/152kB of archives. > > After unpacking 119kB of additional disk space will be used. > > (Reading database ... 142617 files and directories currently installed.) > > Preparing to replace python 2.3.5-5 (using .../python_2.4.3-11_all.deb) > > running python pre-rtupdate hooks for python2.4... > > /usr/share/python/runtime.d/python-gnome2.rtupdate: line 4: pyversions: > > command not found > > Whoops, apparently there's a whole in python policy, packages which use > pyversions (which is pretty much anything doing bytecompiling, right?) need > a dependency on python (>= 2.3.5-6)... No, python-gnome2 already depends on python-support which has this requirement. I think this is rather a bug in python. The preinst calls the hooks, while the pyversions.py script is held in python-minimal, and there is no Pre-Depends: on python-minimal. -- .''`. Josselin Mouette/\./\ : :' : [EMAIL PROTECTED] `. `'[EMAIL PROTECTED] `- Debian GNU/Linux -- The power of freedom
Bug#385909: pyversions: command not found
On Mon, 04 Sep 2006, Steve Langasek wrote:
> > Pyversions is mainly used at build-time and not at installation time.
> > Whatever requires pyversions (and in this case python-gnome2) should be
> > depending on the first version of python that provides it (and now the
> > good question: how do you do that while still using ${python:Depends}?).
>
> By depending on python (>= 2.3.5-6), ${python:Depends}, which will duplicate
> a dependency but still work?
Yes and generate an annoying lintian warning. :)
Cheers,
--
Raphaël Hertzog
Premier livre français sur Debian GNU/Linux :
http://www.ouaza.com/livre/admin-debian/
Bug#385950: libpam-ldap: Broken regexp in postinst script
Package: libpam-ldap Version: 180-1.1 Severity: important perl -i -p -e "s/$replacestring/$parameter $value/i doesn't go well with 'ldaps://127.0.0.1/', some other separator must be used, or /'s need to be escaped. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-rc4-xen Locale: LANG=fi_FI, LC_CTYPE=fi_FI (charmap=ISO-8859-15) (ignored: LC_ALL set to [EMAIL PROTECTED]) Versions of packages libpam-ldap depends on: ii debconf [debconf-2.0] 1.5.3Debian configuration management sy ii libc6 2.3.6.ds1-4 GNU C Library: Shared libraries ii libldap22.1.30-13+b1 OpenLDAP libraries ii libpam0g0.79-3.2 Pluggable Authentication Modules l libpam-ldap recommends no packages. -- debconf information: * shared/ldapns/base-dn: dc=ytti,dc=fi libpam-ldap/override: true * shared/ldapns/ldap_version: 3 * libpam-ldap/dblogin: false * shared/ldapns/ldap-server: ldaps://127.0.0.1/ * libpam-ldap/pam_password: md5 libpam-ldap/binddn: cn=proxyuser,dc=example,dc=net * libpam-ldap/rootbinddn: cn=admin,dc=ytti,dc=fi * libpam-ldap/dbrootlogin: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385942: xrandr reports negative refreshrates in mergedfb mode
forwarded 385942 https://bugs.freedesktop.org/show_bug.cgi?id=6966 tags 385942 upstream kthxbye On Mon, 2006-09-04 at 08:18 +0200, Soeren Sonnenburg wrote: > Package: xserver-xorg-video-ati > Version: 1:6.6.1-2 > Severity: normal > Tags: patch > > This is basically bug https://bugs.freedesktop.org/show_bug.cgi?id=6966 > , which has a patch attached + which is confirmed to be ok by Alex > Deucher. > > As this is breaking all screen-resolution change utilities (e.g. > gnome/kde) I am filing this bug to make sure that at least etch > will have this fix in (as it is currently not yet applied upstream - for > no known reason). It is now, first commit after the 6.6.2 tag. -- Earthling Michel Dänzer | http://tungstengraphics.com Libre software enthusiast | Debian, X and DRI developer
Bug#385952: fvwm: MenuStyle option ignored (Black used instead)
Package: fvwm Version: 1:2.5.17-1 Severity: normal *** Please type your report below this line *** fvwm ignores the first (foreground) color after MenuStyle in ~/.fvwm2rc , e.g. in: MenuStyle White NavyBlue Grey50 10x20 fvwm It uses Black regardless of what I put there. The following (background) color option work fine, though. Same improper behavior with the alternative syntax: MenuStyle * Foreground gold This misbehavior appeared at the latest debian upgrade after the summer. All the best, Nick -- System Information: Debian Release: stable/testing/unstable APT prefers stable APT policy: (700, 'stable'), (100, 'testing'), (70, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-1-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages fvwm depends on: ii debconf [debconf-2.0] 1.5.3 Debian configuration management sy ii gdk-imlib111.9.14-30 imaging library for use with gtk ii libc6 2.3.6.ds1-4 GNU C Library: Shared libraries ii libfontconfig1 2.3.2-7 generic font configuration library ii libfreetype6 2.2.1-2 FreeType 2 font engine, shared lib ii libfribidi00.10.7-3 Free Implementation of the Unicode ii libglib1.2 1.2.10-10.1 The GLib library of C routines ii libgtk1.2 1.2.10-18 The GIMP Toolkit set of widgets fo ii libice61:1.0.0-3 X11 Inter-Client Exchange library ii libncurses55.5-2 Shared libraries for terminal hand ii libpng12-0 1.2.8rel-5.2 PNG library - runtime ii libreadline5 5.1-7 GNU readline and history libraries ii librplay3 3.3.2-11 Shared libraries for the rplay net ii libsm6 1:1.0.0-4 X11 Session Management library ii libstroke0 0.5.1-4 support for mouse strokes like tho ii libx11-6 2:1.0.0-8 X11 client-side library ii libxext6 1:1.0.0-4 X11 miscellaneous extension librar ii libxft22.1.7-1 FreeType-based font drawing librar ii libxi6 1:1.0.0-5 X11 Input extension library ii libxinerama1 1:1.0.1-4.1 X11 Xinerama extension library ii libxpm41:3.5.4.2-3 X11 pixmap library ii libxrender11:0.9.0.2-4 X Rendering Extension client libra ii zlib1g 1:1.2.2-4.sarge.2 compression library - runtime Versions of packages fvwm recommends: ii fvwm-icons 2001.08.13-3 XPMs for fvwm -- debconf information: fvwm/upgrade/pre_2.5.8: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#272079: initrd-tools: Oh why has not this bug been fixed???
Package: initrd-tools Version: 0.1.84.1 Followup-For: Bug #272079 Here I am, six months later, having the same bug when a fix is clearly available but the maintainers don't want to implement it. My situation is completely legit. I have LVM compiled in but need an initrd for a SATA card, and mkinitrd freaks out because of incorrect sanity checking. Please, please, someone on the kernel team, apply the patch to fix this thing so that I don't have to patch my mkinitrd every dang time I want to compile a new kernel. -- System Information: Debian Release: testing/unstable Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.31-2005062601 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages initrd-tools depends on: ii coreutils [fileutils] 5.97-4 The GNU core utilities ii cpio 2.6-17 GNU cpio -- a program to manage ar ii cramfsprogs 1.1-6 Tools for CramFs (Compressed ROM F ii dash 0.5.3-3The Debian Almquist Shell ii fileutils 5.97-4 The GNU file management utilities ii util-linux2.12r-10 Miscellaneous system utilities initrd-tools recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#345958: please include this patch
On Sat, Sep 02, 2006 at 09:13:37AM +1000, Drew Parsons wrote: > > > Any news on this? The patch works pretty well for me. Is etch going to > > release > > with 1.1, or with 1.0 ? If 1.0 is being released it better not be > > unpatched.. > > The patch is applied to xserver 1.1.1. xserver 1.1.1 is in experimental only. This usualy means it isn't intended to make it into the upcoming release. If this is so, the one in sid needs patching. Otherwise, why not uploading to sid directly? > The second of the two patch blocks is inside an #if 0 ... #endif > block. What's the point of it then? Why not just delete the entire > block? Sorry, I don't know. I didn't write the patch, I can only confirm it solved the problem in my hardware. But if the code is really disabled, it's pointless to include that hunk of course :) -- Robert Millan ACK STORM, S.L. - http://www.ackstorm.es -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385694: nut: Fails to properly start on boot.
Hi again Kurt, 2006/9/2, Kurt Roeckx <[EMAIL PROTECTED]>: Package: nut Version: 2.0.2-2 Severity: important Hi, Every time I reboot, nut fails to start proplery. If I then stop nut, and start it again, things work as expected. From the log: Sep 2 07:09:01 intrepid mge-shut[2540]: Startup successful Sep 2 07:09:01 intrepid upsd[2541]: Connected to UPS [myups]: mge-shut-ttyS0 Sep 2 07:09:05 intrepid upsd[2542]: Startup successful Sep 2 07:09:05 intrepid upsmon[2544]: Startup successful Sep 2 07:09:05 intrepid upsd[2542]: Connection from 127.0.0.1 Sep 2 07:09:05 intrepid upsd[2542]: Client [EMAIL PROTECTED] logged into UPS [myups] Sep 2 07:11:16 intrepid upsd[2542]: Data for UPS [myups] is stale - check driver Sep 2 07:11:20 intrepid upsmon[2545]: Poll UPS [EMAIL PROTECTED] failed - Data stale Sep 2 07:11:20 intrepid upsmon[2545]: Communications with UPS [EMAIL PROTECTED] lost Sep 2 07:11:25 intrepid upsmon[2545]: Poll UPS [EMAIL PROTECTED] failed - Data stale Sep 2 07:11:30 intrepid upsmon[2545]: Poll UPS [EMAIL PROTECTED] failed - Data stale Sep 2 07:11:35 intrepid upsmon[2545]: Poll UPS [EMAIL PROTECTED] failed - Data stale Sep 2 07:11:40 intrepid upsmon[2545]: Poll UPS [EMAIL PROTECTED] failed - Data stale Sep 2 07:11:45 intrepid upsmon[2545]: Poll UPS [EMAIL PROTECTED] failed - Data stale Sep 2 07:11:50 intrepid upsmon[2545]: Poll UPS [EMAIL PROTECTED] failed - Data stale Sep 2 07:11:55 intrepid upsmon[2545]: Poll UPS [EMAIL PROTECTED] failed - Data stale Sep 2 07:12:00 intrepid upsmon[2545]: Poll UPS [EMAIL PROTECTED] failed - Data stale Sep 2 07:12:10 intrepid last message repeated 2 times Sep 2 07:12:15 intrepid upsd[2542]: Signal 15: exiting Sep 2 07:12:15 intrepid upsmon[2545]: Signal 15: exiting Sep 2 07:12:15 intrepid upsmon[2544]: upsmon parent: read: Success Sep 2 07:12:26 intrepid mge-shut[2540]: Signal 15: exiting Sep 2 07:13:31 intrepid mge-shut[3092]: Startup successful Sep 2 07:13:31 intrepid upsd[3093]: Connected to UPS [myups]: mge-shut-ttyS0 Sep 2 07:13:35 intrepid upsd[3094]: Startup successful Sep 2 07:13:35 intrepid upsmon[3096]: Startup successful Sep 2 07:13:35 intrepid upsd[3094]: Connection from 127.0.0.1 Sep 2 07:13:35 intrepid upsd[3094]: Client [EMAIL PROTECTED] logged into UPS [myups] At this point things work properly. I have no idea why I need to stop it each time, or why it fails from the boot scripts and works when I start it manually. which system are you running (sarge, testing, ...)? This might be due to several things (serial perms settings, /var dir still offline when nut starts, ...) a good thing would be to replace the init.d/nut script redirection from /dev/null to something like /tmp/nut-trace.log and send it back for analysis. Arnaud -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource Developer - http://arnaud.quette.free.fr/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385951: Fail to scan array in some case when partition is at the end of the disk
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Package: mdadm Version: 2.5.2-7 Severity: critical Tha actual mdadm in testing makes the whole system to unbootable if on raid slice is on the end of a disk. (In some cases) My config: - ---mdadm.conf--- DEVICE partitions ARRAY /dev/md0 level=raid1 num-devices=2 UUID=88cf7fb7:6fab12d7:b713c983:af6eaca5 MAILADDR root - - ---hdc--- Disk /dev/hdc: 60.0 GB, 60060155904 bytes 16 heads, 63 sectors/track, 116374 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdc1 * 1 496 249983+ 83 Linux /dev/hdc2 4971488 499968 82 Linux swap / Solaris /dev/hdc31489 11637457902544 fd Linux raid autodetect - - - ---hdd--- Disk /dev/hdd: 320.0 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdd1 1972878140159+ 8e Linux LVM /dev/hdd29729 1945678140160 8e Linux LVM /dev/hdd3 31705 3891357906292+ fd Linux raid autodetect - - - ---/proc/mdstat--- Personalities : [raid1] read_ahead 1024 sectors md0 : active raid1 hdd3[0] 57902464 blocks [2/1] [U_] unused devices: - -- Please note that I had to run the raid in degraded mode as /dev/hdc3 cannot be in the array (See below). When I do a "mdadm --assemble --scan --auto=yes" (as done in /etc/init.d/mdadm-raid) then I get the following error: - --- mdadm: no recogniseable superblock on /dev/hda2 mdadm: /dev/hda2 has wrong uuid. mdadm: no recogniseable superblock on /dev/hda1 mdadm: /dev/hda1 has wrong uuid. mdadm: no recogniseable superblock on /dev/hda mdadm: /dev/hda has wrong uuid. mdadm: no RAID superblock on /dev/hdd2 mdadm: /dev/hdd2 has wrong uuid. mdadm: no RAID superblock on /dev/hdd1 mdadm: /dev/hdd1 has wrong uuid. mdadm: no RAID superblock on /dev/hdd mdadm: /dev/hdd has wrong uuid. mdadm: no RAID superblock on /dev/hdc2 mdadm: /dev/hdc2 has wrong uuid. mdadm: no RAID superblock on /dev/hdc1 mdadm: /dev/hdc1 has wrong uuid. mdadm: no RAID superblock on /dev/vg1/lv_hathi mdadm: /dev/vg1/lv_hathi has wrong uuid. mdadm: no RAID superblock on /dev/vg1/lv_misc mdadm: /dev/vg1/lv_misc has wrong uuid. mdadm: no RAID superblock on /dev/vg1/lv_mirror mdadm: /dev/vg1/lv_mirror has wrong uuid. mdadm: WARNING /dev/hdc3 and /dev/hdc appear to have very similar superblocks. If they are really different, please --zero the superblock on one If they are the same, please remove one from the list. - --- Cleaning the superblock of /dev/hdc also clean the one of /dev/hdc3 and so leaving the raid in a degraded state. But at least I can now boot the system after running the md0 by hand. Note that the partition /dev/hdd3 is also at the end of the disk but do not make problemes. This is a very critical bug and should be fixed in etch (I think, this is release critical!!!) - -- Package-specific info: - --- mount output /dev/hda1 on / type ext3 (rw) proc on /proc type proc (rw) tmpfs on /dev/shm type tmpfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /tmp type tmpfs (rw,nosuid,nodev,mode=1777) /dev/sysvg/lv_usr on /usr type ext3 (rw,noatime) /dev/sysvg/lv_var on /var type reiserfs (rw) /dev/sysvg/lv_local on /usr/local type ext3 (rw,noatime) /dev/sysvg/lv_home on /home type reiserfs (rw,nosuid,nodev) /dev/vg1/lv_misc on /misc type reiserfs (rw,nosuid,nodev) /dev/vg1/lv_mirror on /mirror type reiserfs (rw,nosuid,nodev) /dev/vg1/lv_hathi on /hathi type ext2 (ro) capifs on /dev/capi type capifs (rw,mode=0666) /proc/bus/usb on /proc/bus/usb type usbdevfs (rw) AFS on /afs type afs (rw) localhost:/var/lib/cfs/.cfsfs on /var/cfs type nfs (rw,port=3049,intr,nfsvers=2,addr=127.0.0.1) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) - --- mdadm.conf DEVICE partitions ARRAY /dev/md0 level=raid1 num-devices=2 UUID=88cf7fb7:6fab12d7:b713c983:af6eaca5 MAILADDR root - --- /proc/mdstat: Personalities : [raid1] read_ahead 1024 sectors md0 : active raid1 hdd3[0] 57902464 blocks [2/1] [U_] unused devices: - --- /proc/partitions: major minor #blocks name rio rmerge rsect ruse wio wmerge wsect wuse running use aveq 9 0 57902464 md0 0 0 0 0 0 0 0 0 0 0 0 58 1 32768000 lvmb 0 0 0 0 0 0 0 0 0 0 0 58 26815744 lvmc 0 0 0 0 0 0 0 0 0 0 0 58 3 32669696 lvmd 0 0 0 0 0 0 0 0 0 0 0 58 4 36044800 lvme 0 0 0 0 0 0 0 0 0 0 0 58 55242880 lvmf 0 0 0 0 0 0 0 0 0 0 0 58 6 360448 lvmg 0 0 0 0 0 0 0 0 0 0 0 58 91048576 lvmj 0 0 0 0 0 0 0 0 0 0 0 22 0 58652496 hdc 288 2376 15528 2120 1127 7727 70854 8760 -20 582540 32154602 22 1 249983 hdc1 11 269 560 80 0 0 0 0 0 60 80 22 2 499968 hdc2 261 1
Bug#383690: Latest update breaks ntp
On Sep 2, 2006, at 1:35 PM, Rick Thomas wrote: I plan to do a non-network install (dvd-only) of the beta3 dvd (which should get me to the condition I was in before the problems) then add a network repo to sources.list (which should attempt to update to the dfsg versions) and see what happens. I did this. The attached "typescript" and "/var/log/aptitude" files will give you all the gory details. But here's the executive summary: After the non-network (DVD-only) install, I added the repository at debian.lcs.mit.edu to my sources.list and did an "aptitude update" and "aptitude upgrade" to get up to the latest levels of everything *but* the ntp packages, so as to avoid a lot of irrelevant noise from updates of other packages. Then I switched back to the DVD-only sources.list to install the ntp packages at level 4.2.0a +stable-2sarge1 from the DVD. I switched back to the network enabled sources.list and did "aptitude update" and "aptitude upgrade" in an attempt to pick up the 4.2.2 +dfsg.2-1 level of the ntp packages from the network repository. I got: The following packages have been kept back: ntp The following packages will be upgraded: ntpdate psmisc 2 packages upgraded, 0 newly installed, 0 to remove and 1 not upgraded. Need to get 142kB of archives. After unpacking 73.7kB will be used. Do you want to continue? [Y/n/?] Get:1ohttp://debian.lcs.mit.edu etch/main ntpdate 1:4.2.2+dfsg.2-1 [59.6kB] Get:2Whttp://debian.lcs.mit.edu etch/main psmisc 22.3-1 [82.0kB] Fetchedo142kB]in80s0(635kB/s) (Reading database ... 22527 files and directories currently installed.) Preparing to replace ntpdate 1:4.2.0a+stable-2sarge1 (using .../ ntpdate_1%3a4.2.2+dfsg.2-1_powerpc.deb) ... Unpacking replacement ntpdate ... Preparing to replace psmisc 22.2-1 (using .../ psmisc_22.3-1_powerpc.deb) ... Unpacking replacement psmisc ... Setting up ntpdate (4.2.2+dfsg.2-1) ... Installing new version of config file /etc/default/ntpdate ... Installing new version of config file /etc/init.d/ntpdate ... Installing new version of config file /etc/logcheck/ignore.d.server/ ntpdate ... Setting up psmisc (22.3-1) ... So the first question is, Why was the ntp package held back? I did "aptitude -v show ntp ntp-server ntp-simple ntpdate" to see the dependency relations of those packages. Perhaps you can make enough sense out of them to explain? Then, in an effort to get it to update the ntp packages other than ntpdate (which was already updated), I did "aptitude dist-upgrade" and got: The following packages are unused and will be REMOVED: libssl0.9.7 ntp The following packages will be automatically REMOVED: ntp-server ntp-simple The following packages will be REMOVED: ntp-server ntp-simple 0 packages upgraded, 0 newly installed, 4 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 2642kB will be freed. Do you want to continue? [Y/n/?] Writing extended state information... Done (Reading database ... 22530 files and directories currently installed.) Removing ntp-server ... Stopping NTP server: ntpd. Removing ntp ... Removing ntp-simple ... Removing libssl0.9.7 ... which left me without any ntp packages at all installed (except ntpdate). So the second question is, Why did it think the "ntp" package was unused? And the third question is, Why didn't it install the updated "ntp" package? "Curiouser and curiouser!", cried Alice. Finally, doing "aptitude install ntp" brought in the 4.2.2+dfsg.2-1 level from the network repository. Hope this helps! Rick typescript Description: Binary data aptitude_log Description: Binary data
Bug#385949: initramfs-tools: lilo not run after installation; system did not boot any more
Package: initramfs-tools Version: 0.77b Severity: critical Justification: breaks the whole system *** Please type your report below this line *** I use Debian testing. The latest "apt-get update; apt-get upgrade" installed version 0.77b. After that, the system would not boot again: -=-=-= [...] ACPI wakeup devices PCI0 UAR1 USB1 USB2 USB3 [...] ACPI: (supports S0 S1 S4 S5) RAMDISK: Compressed image found at block 0 invalid compressed format (err=1) VFS: cannot open root device "305" or unknown-block(3,5) Please append a correct "root=" boot option Kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(3,5) -=-=-= A web search ran from a live CD led me think this was because "lilo" had failed to be run after the update. The following sequence, inspired from this URL: http://www.developpez.net/forums/archive/index.php/t-40078.html fixed it for me (commands run as root in a terminal on the live CD --- YMMV as hda/hda5 depend on every system): -=-=-= mkdir -p /mnt/hda/proc /mnt/hda/dev/shm /mnt/hda/sys mount -t proc proc /mnt/hda/proc mount -t sysfs sysfs /mnt/hda/sys #si c'est un kernel 2.6.x mount -f -t tmpfs tmpfs /mnt/hda/dev mount -f -t tmpfs tmpfs /mnt/hda/dev/shm mount -f -t devpts -o gid=4,mode=620 devpts /mnt/hda/dev/pts mount /dev/hda5 /mnt/hda chroot /mnt/hda -=-=-= Then I could run: -=-=-= Knoppix:/# lilo -=-=-= (Actually I had to run "lilo -P ignore", as suggested by lilo, because of a problem, but I think this is unrelated. I reran "lilo" without problems or warnings once I had correctly booted up the usual system). Suggestion: (I will now try to switch to GRUB but) DO include this lilo check in your non-regression tests! lilo is normally installed on my system: -=-=-= # dpkg -l lilo Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ NameVersion Description +++-===-===-== ii lilo22.6.1-7.1 LInux LOader - The Classic OS loader can load Linux and others -=-=-= -- Package-specific info: -- /proc/cmdline auto BOOT_IMAGE=Linux-2.6.16 ro root=305 -- /proc/filesystems 13: cramfs 17: ext3 -- lsmod Module Size Used by ipt_MASQUERADE 3200 1 xt_tcpudp 3072 1 iptable_filter 2816 0 ip_nat_ftp 3072 0 ip_conntrack_ftp7324 1 ip_nat_ftp iptable_nat 7684 1 ip_nat 16116 3 ipt_MASQUERADE,ip_nat_ftp,iptable_nat ip_tables 11352 2 iptable_filter,iptable_nat ip_conntrack 48952 5 ipt_MASQUERADE,ip_nat_ftp,ip_conntrack_ftp,iptable_nat,ip_nat nfnetlink 6168 2 ip_nat,ip_conntrack x_tables 11396 4 ipt_MASQUERADE,xt_tcpudp,iptable_nat,ip_tables radeon 96032 1 drm62228 2 radeon ipv6 218912 8 ppdev 8324 0 lp 10496 0 dm_mod 48180 0 snd_emu10k1_synth 6400 0 snd_emux_synth 30528 1 snd_emu10k1_synth snd_seq_virmidi 6272 1 snd_emux_synth snd_seq_midi_emul 5760 1 snd_emux_synth snd_seq_dummy 3588 0 snd_seq_oss27812 0 snd_seq_midi8096 0 snd_seq_midi_event 6592 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi snd_seq43852 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_emu10k199940 1 snd_emu10k1_synth snd_rawmidi22496 3 snd_seq_virmidi,snd_seq_midi,snd_emu10k1 snd_ac97_codec 82848 1 snd_emu10k1 snd_ac97_bus2112 1 snd_ac97_codec i2c_viapro 7956 0 snd_pcm_oss44128 0 snd_mixer_oss 15744 1 snd_pcm_oss i2c_core 19536 1 i2c_viapro mousedev 10496 1 tsdev 7296 0 snd_pcm74504 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss snd_seq_device 8332 8 snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_emu10k1,snd_rawmidi via_ircc 23252 0 snd_timer 20420 3 snd_seq,snd_emu10k1,snd_pcm snd_page_alloc 9864 2 snd_emu10k1,snd_pcm snd_util_mem4352 2 snd_emux_synth,snd_emu10k1 irda 161596 1 via_ircc snd_hwdep 8580 2 snd_emux_synth,snd_emu10k1 snd46400 13 snd_emux_synth,snd_seq_virmidi,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep crc_ccitt 2048 1 irda shpchp 39424 0 pci_hotplug24308 1 shpchp emu10k1_gp 3520
Bug#384945: texlive system will not install
Hi all! On Mon, 04 Sep 2006, Frank Küster wrote: > > In the recent upgrade to KDE 3.5.4 kdegraphics seemed to require texlive > > packages, but these failed with an error that a file was owned by two > > packages, and that I should remove texlive. I attempted to do so. > > 1. Why does or did kdegraphics require texlive, and is not satisfied >with tetex? kdegraphics never required texlive, not even provide alternative deps on texlive. Eg. kdegraphcs depends on kdvi which in turn recommends tetex-bin. > > List of ls-R files > > > > lrwxrwxrwx 1 root root 27 2006-08-27 23:16 /usr/share/texmf-texlive/ls-R -> > > /var/lib/texmf/ls-R-TEXLIVE > > 2. It is strange that there is only one ls-R file. Please send us the >output of Probably because most other packages are removed, and mktexlsr has never been called. > > ## > > Config files > > total 20 > > drwx-- 2 ross ross 256 2006-06-26 09:18 Desktop > > drwxr-xr-x 3 ross ross 256 2006-02-15 21:18 download > > drwx-- 2 ross ross 48 2006-02-14 10:42 Mail > > -rw-r--r-- 1 root root 1828 2006-03-31 21:14 pci > > -rw--- 1 ross ross0 2006-04-16 15:21 postponed > > drwxr-xr-x 2 ross ross 80 2006-06-17 16:16 RCS > > -rw--- 1 ross ross 8612 2006-07-22 12:13 sent > > -rw-r--r-- 1 ross ross 850 2006-06-25 23:18 testspam > > 3. I've never seen such an output in a texlive bugreport, but then I >haven't seen lots of them, being focused on teTeX until recently. Is >this expected? This comes from an unchecked code in the bug script, where texmf.cnf fmtutuil.cnf updmap.cnf is NOT found: for i in texmf.cnf fmtutil.cnf updmap.cfg ; do f=`kpsewhich --format='web2c files' $i` ls -l $f >&3 done Already changed in the svn depot. > > texlive recommends no packages. > > 4. All texlive packages that do not directly depend on tex-common should >have a reportbug control file that has a "report-with: tex-common" >statement, and maybe more packages. Good idea, will do this... > 5. As far as I understood, dvipdfmx calls mktexlsr unconditionally, this >should probably be a separate bug. Yes, should be. Best wishes Norbert -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385954: dget: please add options to override upstream caches
Package: devscripts Version: 2.9.21 Severity: wishlist File: /usr/bin/dget It would be nice if dget could be told to call curl/wget in such a way that it tells caches to expire the content. piper:/tmp> dget -x http://snow.ethz.ch/debian/foremost/foremost_1.3-1.dsc /usr/bin/dget: retrieving http://snow.ethz.ch/debian/foremost/foremost_1.3-1.dsc % Total% Received % Xferd Average Speed TimeTime Time Current Dload Upload Total SpentLeft Speed 100 327 100 3270 0541 0 --:--:-- --:--:-- --:--:-- 0 /usr/bin/dget: using existing foremost_1.3.orig.tar.gz /usr/bin/dget: md5sum for foremost_1.3-1.diff.gz does not match -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/dash Kernel: Linux 2.6.17-2-amd64 Locale: LANG=en_GB, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Versions of packages devscripts depends on: ii debianutils 2.17 Miscellaneous utilities specific t ii dpkg-dev1.13.22 package building tools for Debian ii libc6 2.3.999.2-12 GNU C Library: Shared libraries ii perl5.8.8-6.1Larry Wall's Practical Extraction ii sed 4.1.5-1 The GNU sed stream editor Versions of packages devscripts recommends: ii fakeroot 1.5.10 Gives a fake root environment -- no debconf information -- .''`. martin f. krafft <[EMAIL PROTECTED]> : :' : proud Debian developer, author, administrator, and user `. `'` http://people.debian.org/~madduck - http://debiansystem.info `- Debian - when you have better things to do than fixing systems signature.asc Description: Digital signature (GPG/PGP)
Bug#385275: tar: -: file name contains nul character
reassign 385275 dpkg-dev forcemerge 375749 385275 thanks It's not a java-package but a generic dpkg-dev issue (caused by a tar change), and it's pending, fix should come soon. Cheers, Eric > Package: java-package > Version: 0.28 > Severity: minor > > There's a warning about a nul character in a file name. I don't know if > there are any problems because of this or if it's just the warning, so I > set severity to minor. > > [EMAIL PROTECTED]:~$ fakeroot make-jpkg jre-1_5_0_06-linux-i586.bin > [..] > Create debian package: > dh_testdir > dh_testroot > dh_installchangelogs > dh_installdocs > dh_compress > dh_fixperms > dh_installdeb > dh_shlibdeps > dh_gencontrol > dh_md5sums > dh_builddeb > dpkg-deb: bygger paketet "sun-j2re1.5" i > "/tmp/make-jpkg.RTDKYf6007/sun-j2re1.5_1.5.0+update06_i386.deb". > tar: -: file name read contains nul character > > -- System Information: > Debian Release: testing/unstable > APT prefers testing > APT policy: (500, 'testing') > Architecture: i386 (i686) > Shell: /bin/sh linked to /bin/dash > Kernel: Linux 2.6.16 > Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8) > > Versions of packages java-package depends on: > ii debhelper 5.0.37.3 helper programs for > debian/rules > ii fakeroot 1.5.10 Gives a fake root environment > ii unzip 5.52-8 De-archiver for .zip files > > java-package recommends no packages. > > -- no debconf information > > > ___ > pkg-java-maintainers mailing list > pkg-java-maintainers@lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/pkg-java-maintainers > > -- Eric de France, d'Allemagne et de Navarre
Bug#385953: sox: segmentation fault when using pitch
Subject: sox: segmentation fault when using 'pitch' effect Package: sox Version: 12.17.9-1 Severity: normal sox is sometimes crashed when using 'pitch' effect to change some wave files. For example: freya:/tmp> sox crash.wav crash2.wav pitch 350 Segmentation fault freya:/tmp> gdb sox GNU gdb 6.4.90-debian Copyright (C) 2006 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i486-linux-gnu"...Using host libthread_db library "/lib/tls/i686/cmov/libthread_db.so.1". (gdb) set args crash.wav crash2.wav pitch 350 (gdb) run Starting program: /tmp/sox-12.17.9/sox-12.17.9/src/sox crash.wav crash2.wav pitch 350 Program received signal SIGSEGV, Segmentation fault. 0x08067552 in st_pitch_drain (effp=0x8098274, obuf=0x80b38a0, osamp=0x8098294) at pitch.c:592 592 obuf[i++] = clip(pitch, pitch->acc[pitch->iacc++]); (gdb) backtrace #0 0x08067552 in st_pitch_drain (effp=0x8098274, obuf=0x80b38a0, osamp=0x8098294) at pitch.c:592 #1 0x08049e05 in drain_effect (e=1) at sox.c:1341 #2 0x0804a7d8 in flow_effect_out () at sox.c:1177 #3 0x0804ba4b in main (argc=Cannot access memory at address 0x2000 ) at sox.c:1330 regards, Ying-Chun Liu -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-2-k7 Locale: LANG=zh_TW.UTF-8, LC_CTYPE=zh_TW.UTF-8 (charmap=UTF-8) Versions of packages sox depends on: ii libasound2 1.0.11-7ALSA library ii libc62.3.6.ds1-4 GNU C Library: Shared libraries ii libmad0 0.15.1b-2.1 MPEG audio decoder library ii libogg0 1.1.3-2 Ogg Bitstream Library ii libvorbis0a 1.1.2-1 The Vorbis General Audio Compressi ii libvorbisenc21.1.2-1 The Vorbis General Audio Compressi ii libvorbisfile3 1.1.2-1 The Vorbis General Audio Compressi sox recommends no packages. -- no debconf information -- PaulLiu(劉穎駿) E-mail address: [EMAIL PROTECTED] crash.wav.bz2 Description: application/bzip signature.asc Description: OpenPGP digital signature
Bug#385595: libc6: smb:// opening file is not supported in mosta application when it i sby nautilus
reassign 385595 libgnomevfs2-0 severity 385595 wishlist retitle 385595 There should be a way to restrict the supported URI schemes thanks Le samedi 02 septembre 2006 à 22:00 +0200, Aurelien Jarno a écrit : > Jean-Michel a écrit : > >>> When I try to open a file (shared by a windows machine) from nautilus, > >>> the software (openoffice, firefox, galeon ) crashes, because it does not > >>> knwo how to open the file. Then these are mostly bugs in the applications. As for openoffice, I've just checked and it works if you install openoffice.org-gnome. For firefox, epiphany and galeon, this is because nautilus assumes they are capable of opening all URIs, because their .desktop file contains a %U in their command line, while they are only able to open URIs supported by libxul (meaning, http, ftp and the like). KDE already has a key to define the list of supported URI schemes (X-KDE-Protocols), but GNOME doesn't. This is probably where the problem lies. > nautilus should retrieve the file and pass the local file to the > application. This cannot work reliably, this is why GNOME developers are privileging gnome-vfs instead. -- .''`. Josselin Mouette/\./\ : :' : [EMAIL PROTECTED] `. `'[EMAIL PROTECTED] `- Debian GNU/Linux -- The power of freedom
Bug#385952: merge #383435 #384695
I realize only now that #385952 is yet another version of #383435 #384695 Sorry... Maybe their headers are not specific enough. I suggest to merge the 3 bugs... All the best, Nick -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#348316: faubackup: Return with non-zero exit value on full disk
Hi! One of my backup systems went out of disk space last night. I saw the disk full message, but faubackup exited with return code zero... This is an excerpt of the log file I was sent: Rotating backup Will execute: ssh -i /root/.ssh/back2print_backup_key [EMAIL PROTECTED] faubackup --one-file-system /mnt/backup/faubackup/staging/backprint/root_mnt_samba /mnt/backup/faubackup/daily/backprint/root_mnt_samba faubackup-scatter: fwrite ..inodes/fe04/00/4c/00/58: No space left on device Result: 0 The "Result: " line really is the $? value:-/ Both client and server run faubackup-0.5.8. Any chance to get it fixed to return non-zero exit values after errors? Thanks, JBG -- Jan-Benedict Glaw [EMAIL PROTECTED] +49-172-7608481 Signature of: ...und wenn Du denkst, es geht nicht mehr, the second : kommt irgendwo ein Lichtlein her. signature.asc Description: Digital signature
Bug#385840: package build-depends on g++-3.4, which is not available on hppa
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Matthias Klose wrote: > Package: vdrift > Version: 0.0.2006.02.21-1 > Severity: normal > > the package build-depends on g++-3.4 or g++-4.0, which is not > available on hppa. Please build using g++-4.1. > > If the package cannot be built using g++-4.1, please make sure that a > bug report is filed against the g++-4.1 package. I tried removing the dependency on g++-3.4, thus defaulting to the default compiler. It failed compiling (arch=powerpc) with a weird error. All the build dependencies are installed. So, at a first glance, this seems to be there for a reason (not that is doesn't need fixing :-) merci:/vdrift-0.0.2006.02.21# dpkg-buildpackage dpkg-buildpackage: source package is vdrift dpkg-buildpackage: source version is 0.0.2006.02.21-1 dpkg-buildpackage: source changed by Gonéri Le Bouder <[EMAIL PROTECTED]> dpkg-buildpackage: host architecture powerpc dpkg-buildpackage: source version without epoch 0.0.2006.02.21-1 debian/rules clean test -x debian/rules test "`id -u`" = 0 /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/vdrift-0.0.2006.02.21' make[1]: Nothing to be done for `reverse-config'. make[1]: Leaving directory `/vdrift-0.0.2006.02.21' if [ "reverse-patches" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/01_add_libalut+fix_build.patch debian/patches/02_set_g++-3.4.patch Trying reverse patch debian/patches/02_set_g++-3.4.patch at level 1 ... success. Trying reverse patch debian/patches/01_add_libalut+fix_build.patch at level 1 ... success. if [ "reverse-patches" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "reverse-patches" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi for dir in debian/patches ; do \ rm -f $dir/*.log ; \ done scons --directory . CFLAGS="-g -Wall -O2" CXXFLAGS="-g -Wall -O2" . destdir=/vdrift-0.0.2006.02.21/debian/vdrift/ release=1 --keep-going - --clean || true scons: Reading SConscript files ... Checking for main() in C library openal... yes Checking for C++ header file GL/gl.h... yes Checking for C++ header file GL/glu.h... yes Checking for C++ header file SDL/SDL.h... yes Checking for C++ header file SDL/SDL_image.h... yes Checking for C++ header file SDL/SDL_net.h... yes scons: *** Target `$destdir$bin' of Install() is a file, but should be a directory. Perhaps you have the Install() arguments backwards? File "src/SConscript", line 76, in ? rm -f debian/stamp-scons-build rm -rf .sconf_temp/ rm -f .sconsign.dblite config.log dh_clean dpkg-source -b vdrift-0.0.2006.02.21 dpkg-source: building vdrift using existing vdrift_0.0.2006.02.21.orig.tar.gz dpkg-source: building vdrift in vdrift_0.0.2006.02.21-1.diff.gz dpkg-source: building vdrift in vdrift_0.0.2006.02.21-1.dsc debian/rules build test -x debian/rules mkdir -p "." /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/vdrift-0.0.2006.02.21' make[1]: Nothing to be done for `reverse-config'. make[1]: Leaving directory `/vdrift-0.0.2006.02.21' if [ "debian/stamp-patched" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/01_add_libalut+fix_build.patch debian/patches/02_set_g++-3.4.patch Trying patch debian/patches/01_add_libalut+fix_build.patch at level 1 ... success. Trying patch debian/patches/02_set_g++-3.4.patch at level 1 ... success. if [ "debian/stamp-patched" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "debian/stamp-patched" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi make[1]: Entering directory `/vdrift-0.0.2006.02.21' make[1]: Nothing to be done for `update-config'. make[1]: Leaving directory `/vdrift-0.0.2006.02.21' scons --directory . CFLAGS="-g -Wall -O2" CXXFLAGS="-g -Wall -O2" destdir=/vdrift-0.0.2006.02.21/debian/vdrift/ release=1 scons: Reading SConscript files ... Checking for main() in C library openal... yes Checking for C++ header file GL/gl.h... no You do not have the GL/gl.h headers installed. Exiting. make: *** [debian/stamp-scons-build] Error 1 - -- Regards, EddyP = "Imagination is more important than knowledge" A.Einstein -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFE++HrY8Chqv3NRNoRAnFbAJ9QV1uNK2KsmmhtWGYYhd9nCDr9WwCg1LKF iBcAVrp9aClGw/8wAJBp/3A= =lLLL -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385934: [Pkg-xen-devel] Bug#385934: xen-hypervisor-3.0-i386: Hypervisor reboots before starting Dom0
Hello! On Sun, Sep 03, 2006 at 11:43:45PM -0400, Mike Edwards wrote: > Package: xen-hypervisor-3.0-i386 > Version: 3.0.2+hg9697-2 > Severity: grave > Justification: renders package unusable > > Hypervisor reboots system after printing: > (XEN) Xen trace buffers: disabled > > From what I've found online, Xen should start booting the linux kernel at > this point, but never does so. You beat me with reporting that. I'm seeing exactly the same here. ii linux-image-2.6.16-2-xen-686 2.6.16-18 Linux kernel 2.6.16 image on PPro/Celeron/PII/PIII/P4 machines ii xen-hypervisor-3.0-i386 3.0.2+hg9697-2The Xen Hypervisor for i386 > System used is custom-built, using an Intel D815EEA2 motherboard and 1 GHz > PIII with 512 MB RAM (hardware should be supported by Xen). Pentium II with 300 MHz for me and also, Xen was working previously, which is three weeks ago. (Been away for three weeks.) It broke after I updated to the above versions of the hypervisor and / or kernel. Regards, Thomas signature.asc Description: Digital signature
Bug#385956: linkchecker: will not accept URLs containing numerals
Package: linkchecker Version: 4.3-1 Severity: normal The javascript URL checking is obviously too restrictive : http://localhost/whatever is a valid URL whereas http://localhost/2006 is not :( Best regards, -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-2-686 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages linkchecker depends on: ii python2.4.3-11 An interactive high-level object-o ii python-central0.5.5 register and build utility for Pyt ii python2.4 2.4.3-8An interactive high-level object-o linkchecker recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#272079: initrd-tools: Oh why has not this bug been fixed???
On Mon, Sep 04, 2006 at 12:50:50AM -0700, Jesse Molina wrote: > Package: initrd-tools > Version: 0.1.84.1 > Followup-For: Bug #272079 > > > Here I am, six months later, having the same bug when a fix is clearly > available but the maintainers don't want to implement it. no qualified for a stable update afais. > My situation is completely legit. I have LVM compiled in but need an > initrd for a SATA card, and mkinitrd freaks out because of incorrect > sanity checking. > > Please, please, someone on the kernel team, apply the patch to fix > this thing so that I don't have to patch my mkinitrd every dang time I > want to compile a new kernel. mkinitrd is no longer supported, initramfs-tools is the default successor you'll find it on backports.org see also http://wiki.debian.org/InitrdReplacementOptions best regards -- maks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385949: initramfs-tools: lilo not run after installation; system did not boot any more
severity 385949 important tags 385949 moreinfo stop works for many lilo installs On Mon, Sep 04, 2006 at 09:55:10AM +0200, Sebastien Blondeel wrote: > *** Please type your report below this line *** > > I use Debian testing. > The latest "apt-get update; apt-get upgrade" installed version 0.77b. > After that, the system would not boot again: i need more information, please post the output of cat /etc/kernel-img.conf ls -l /etc/lilo.conf ls -l /sbin/lilo dpkg -l grub best regards -- maks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#383945: Status of bloboats
[ cc-ing the ITP, so people know that work is going on :) ] Hi! I just checked the copyright-file of your package, and if I understand it corectly is (not yet) fit for an upload to main. Citing debian/copyright: == This license holds for the program itself: the source code and the data files except some of the sounds files. [... usual GPL stuff...] Sound files are licensed under Sampling Plus 1.0 license. (http://creativecommons.org/licenses/sampling+/1.0/) == Without further checking those statement seems to contradict each other "some of the soundfiles" and "Sound files" (I would read the last one as "all sound files"). If it's just some of them, then there should be list of which of them falls under the Sampling Plus 1.0 license. Second point would be, that just mentioning the URL of the license is against Policy 4.5 "Every package must be accompanied by a verbatim copy of its copyright and distribution license...". Thirst and last point (the most important one): I think the Sampling Plus 1.0 license is non-free; quoting the long versions § 3.b: == Prohibition on advertising. All advertising and promotional uses are excluded from the above rights, except for advertisement and promotion of the Derivative Work(s) that You are creating from the Work and Yourself as the author thereof. == I think that fails §6 DFSG. I'm not sure, §3.a ii of this license is okay for the DFSG, but tend to think "yes". So, I don't intend to upload this package, until this is resolved (or someone convinces me, that this license is dfsg free). Yours sincerely, Alexander -- http://learn.to/quote/ http://www.catb.org/~esr/faqs/smart-questions.html signature.asc Description: Digital signature
Bug#383766: Fwd: [vendor-sec] Question about PostgreSQL SQL injection fix in 7.6.86
Hi, FYI, a while ago I asked upstream about this issue, since the release announcement was not really helpful to track down the issue. So basically upstream confirms that this is the same quoting fix as applied to other PostgreSQL client packages (he just got the CVE wrong; CVE-2006-2313 was an internal PostgreSQL server issue while CVE-2006-2314 is the client quoting bug). HTH, Martin - Forwarded message from Martin Pitt <[EMAIL PROTECTED]> - From: Martin Pitt <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Cc: Vendor Security <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED], Vendor Security <[EMAIL PROTECTED]> Mail-Followup-To: [EMAIL PROTECTED], Vendor Security <[EMAIL PROTECTED]> Subject: [vendor-sec] Question about PostgreSQL SQL injection fix in 7.6.86 Date: Thu, 17 Aug 2006 09:41:40 +0200 X-Spam-Status: No, score=0.0 required=4.0 tests=AWL,BAYES_50, RCVD_IN_SORBS_WEB autolearn=no version=3.0.3 Hi Pike developers, The 7.6.86 announcement advertises a "Fix for potential SQL injection vulnerability in Postgres." Mitre assigned CVE-2006-4041 to this, but there is very little information about the vulnerability. I found this in CVS: /cvs/Pike/7.6/lib/modules/Sql.pmod/Sql.pike revision 1.26 date: 2006/06/06 03:25:59; author: adam; state: Exp; lines: +4 -2 Make Sql.postgres objects use the safe quote() method if available. /cvs/Pike/7.6/src/modules/Postgres/ revision 1.25 date: 2006/05/24 17:49:56; author: adam; state: Exp; lines: +5 -2 backport SQL injection fix from 7.7 revision 1.40 date: 2006/05/24 17:49:56; author: adam; state: Exp; lines: +39 -2 backport SQL injection fix from 7.7 which seems to be the fix for the recent general PostgreSQL/MySQL \' -> '' quote escaping issue (CVE-2006-2314 for PostgreSQL). Does that announcement refer to this quoting fix (it would match the description)? Thank you, Martin -- Martin Pitthttp://www.piware.de Ubuntu Developer http://www.ubuntu.com Debian Developer http://www.debian.org In a world without walls and fences, who needs Windows and Gates? - End forwarded message - - Forwarded message from Adam Montague <[EMAIL PROTECTED]> - From: Adam Montague <[EMAIL PROTECTED]> To: [EMAIL PROTECTED], Vendor Security <[EMAIL PROTECTED]> Cc: [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: [vendor-sec] Re: Question about PostgreSQL SQL injection fix in 7.6.86 Date: Thu, 17 Aug 2006 11:35:50 -0400 X-Spam-Status: No, score=0.5 required=4.0 tests=AWL,BAYES_60 autolearn=no version=3.0.3 Martin Pitt <[EMAIL PROTECTED]> wrote: > > /cvs/Pike/7.6/lib/modules/Sql.pmod/Sql.pike > revision 1.26 > date: 2006/06/06 03:25:59; author: adam; state: Exp; lines: +4 -2 > Make Sql.postgres objects use the safe quote() method if available. This makes Sql.postgres use the right quote() method. This didn't get into a release though, so Sql.postgres is still unsafe in 7.6.86, only Postgres.postgres is safe. We really should do a new release with this fix in it. > > /cvs/Pike/7.6/src/modules/Postgres/ > revision 1.25 > date: 2006/05/24 17:49:56; author: adam; state: Exp; lines: +5 -2 > backport SQL injection fix from 7.7 > > revision 1.40 > date: 2006/05/24 17:49:56; author: adam; state: Exp; lines: +39 -2 > backport SQL injection fix from 7.7 > > > which seems to be the fix for the recent general PostgreSQL/MySQL > \' -> '' quote escaping issue (CVE-2006-2314 for PostgreSQL). Does > that announcement refer to this quoting fix (it would match the > description)? No, its actually for CVE-2006-2313, but it adds a safe quoting method to the Postgres.postgres module which uses the postgresql library's escaping functions. So as long as you have a postgresql version that fixes CVE-2006-2314 when you compile the pike postgresql module, then it will be safe too. Any future problems with encodings shouldn't require changes to the pike module either. Adam ___ Vendor Security mailing list Vendor [EMAIL PROTECTED] https://www.lst.de/cgi-bin/mailman/listinfo/vendor-sec - End forwarded message - -- Martin Pitthttp://www.piware.de Ubuntu Developer http://www.ubuntu.com Debian Developer http://www.debian.org In a world without walls and fences, who needs Windows and Gates? signature.asc Description: Digital signature
Bug#385857: [Pkg-bluetooth-maintainers] Bug#385857: please upgrade to bluez-utils and bluez-libs 3.4
Hi Flavio, > Package: bluez-utils > Version: 3.1-4 > Severity: wishlist > > Yesterday I bought a Bluetooth USB dongle to connect with my mobile > phone, but I had some problems with discovery and sending files from > phone to computer. I'm using bluez-utils and kdebluetooth on Debian > testing/unstable. > > The problem with discovery was the well-known issue with ISCAN, but > after I fixed that I still wasn't able to send files from phone to > computer. Finally I packaged bluez-libs and bluez-utils 3.4 and it > worked at the first try, so I suspect the "couple of issues of the D-Bus > based API" fixed in 3.2, 3.3 and 3.4 are significant after all. the 3.5 is coming really soon and fixes another couple of rare race conditions that can lead to segmentation faults of hcid. The 3.1 version is not really suited for daily use. > bluez-libs compiled out of the box by just unpacking and moving the > debian directory over, but bluez-utils needs some work: > > * remove bluez-bcm203x package (bcm203x firmware loader removed upstream) Not needed at all. You don't wanna support a 2.4 kernel and even if you really want to, you won't find any of these devices anymore. For all 2.6 kernels the bcm203x kernel module takes care of loading the firmware. This package has to die and from an USB and udev perspective it was a really nasty hack. > * remove 000_rfcomm_conf_example.patch: the example is already commented > * remove 004_rfcomm_usage.patch: applied upstream Sometimes it is a good idea to feed patches back to upstream so I don't have to extract them from the packages. > Also note that apparently it is important to remove leftover stuff from > /var/lib/bluetooth/ to fix the ISCAN issue; it is also probably > a good idea to add "discovto 0;" to the default configuration file (see > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=384379). Adding discovto makes a device more insecure. It should go back to non-discoverable mode unless the user configures it otherwise. And removing all files from /var/lib/bluetooth is a really bad idea. You will also remove link keys and the name cache. If you wanna reset the settings then only look at the config files (plural, because some people actually use multiple adapters) in that directory. However I wouldn't advise to touch the configuration storage at all. > Finally, upstream added udev rules for Bluetooth serial PCMCIA cards; I > don't know if these udev rules are useful. They are a fully replacement for the ones in the Debian package. That is another thing that always needs to be discussed with upstream. To install them --enable-pcmciarules is needed and the correct configure call. Example is in the README. Otherwise the wrong directory will be picked for them. > -- System Information: > Debian Release: testing/unstable > APT prefers testing > APT policy: (500, 'testing'), (10, 'unstable') > Architecture: i386 (i686) > Shell: /bin/sh linked to /bin/bash > Kernel: Linux 2.6.17.11-athlon > Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) > > Versions of packages bluez-utils depends on: > ii dbus 0.62-4 simple interprocess messaging > syst > ii libbluetooth23.1-1 Library to use the BlueZ Linux > Blu > ii libc62.3.6-15GNU C Library: Shared libraries > ii libdbus-1-2 0.62-4 simple interprocess messaging > syst > ii libusb-0.1-4 2:0.1.12-2 userspace USB programming library > ii lsb-base 3.1-14 Linux Standard Base 3.1 init > scrip > ii makedev 2.3.1-82creates device files in /dev > ii module-init-tools3.2.2-3 tools for managing Linux kernel > mo > ii modutils 2.4.27.0-6 Linux module utilities > ii sysvinit 2.86.ds1-15 System-V-like init utilities > ii udev 0.093-1 /dev/ and hotplug management > daemo > > bluez-utils recommends no packages. > > -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385955: firefox crashes lunching kaffeine (several times) to play video (backtrace included)
Package: kaffeine-mozilla Version: 0.4.3.1.dfsg-0.1 Severity: majorki I rate it major severity, because crashing "remotely" a web browwser can mean some buffer overflow etc. and perhaps can lead to security problems - just in case. Firefox often crashes when I lunch video files from it. Firefox starts kaffeine to play the video (.avi, streams etc). Firefox is in background with window "Kaffeine plugin started", and kaffeine is playing the video. When I go back to Firefox and open othe pages with other video, then quite often the browser crashes after a while of doing so (few minutes). In the example crash below I opened a page with video stream, and while it was playing in started Kaffeine, I opened two more pages each playing a stream, then kaffeine freezed and in gdb I saw the SIGSEGV error. ii firefox 1.5.dfsg+1.5.0.4-1 lightweight web ii firefox-dbg 1.5.dfsg+1.5.0.4-1 debugging ii firefox-dom-inspector1.5.dfsg+1.5.0.4-1 tool for ii firefox-gnome-support1.5.dfsg+1.5.0.4-1 Support for Gnome ii firefox-webdeveloper 1.0.2-1 web developer ii mozilla-firefox 1.5.dfsg+1.5.0.4-1 Transition ii mozilla-firefox-dom-inspector1.5.dfsg+1.5.0.4-1 Transition ii mozilla-firefox-gnome-support1.5.dfsg+1.5.0.4-1 Transition ii mozilla-firefox-webdeveloper 1.0.2-1 web developer [EMAIL PROTECTED]:~$ dpkg --list *kaffeine* | grep ii ii kaffeine 0.8.1-3 versatile media player for KDE ii kaffeine-mozilla 0.4.3.1.dfsg-0.1 mozilla plugin that lanches [EMAIL PROTECTED]:~$ dpkg --list *xine* | grep ii ii amarok-xine 1.4.0a-1+b1xine engine for the amaroK ii gxine 0.5.6-0.1 the xine video player, ii libarts1-xine 3.5.3-2aRts plugin enabling xine ii libxine-dev 1.1.1-2the xine video player library, ii libxine1 1.1.1-2the xine video/media player ii libxinerama-dev 1.0.1-4X11 Xinerama extension library ii libxinerama1 1.0.1-4X11 Xinerama extension library ii totem-xine1.4.1-2A simple media player for the p ii x11proto-xinerama-dev 1.1.2-3X11 Xinerama extension wire ii xine-ui 0.99.3-1.1 the xine video player, user ii xinetd2.3.14-1 replacement for inetd with many - [EMAIL PROTECTED]:~$ md5sum /usr/lib/firefox/firefox-bin 05c073908fc914f8e2564a53c0e23661 /usr/lib/firefox/firefox-bin [EMAIL PROTECTED]:~$ gdb /usr/lib/firefox/firefox-bin GNU gdb 6.4.90-debian Copyright (C) 2006 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i486-linux-gnu"...startUsing host libthread_db library "/lib/tls/i686/cmov/libthread_db.so.1". (gdb) start Breakpoint 1 at 0x807856b: file nsBrowserApp.cpp, line 59. Starting program: /usr/lib/firefox/firefox-bin /usr/lib/firefox/firefox-bin: error while loading shared libraries: libxpcom_core.so: cannot open shared object file: No such file or directory Program exited with code 0177. (gdb) quit [EMAIL PROTECTED]:~$ /usr/lib/firefox/firefox-bin /usr/lib/firefox/firefox-bin: error while loading shared libraries: libxpcom_core.so: cannot open shared object file: No such file or directory [EMAIL PROTECTED]:~$ vim /usr/lib/firefox/firefox [EMAIL PROTECTED]:~$ man firefox Reformatting firefox(1), please wait... [EMAIL PROTECTED]:~$ md5sum /usr/lib/firefox/firefox-bin 05c073908fc914f8e2564a53c0e23661 /usr/lib/firefox/firefox-bin [EMAIL PROTECTED]:~$ firefox -g GNU gdb 6.4.90-debian Copyright (C) 2006 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i486-linux-gnu"...Using host libthread_db library "/lib/tls/i686/cmov/libthread_db.so.1". (gdb) run Starting program: /usr/lib/firefox/firefox-bin -a firefox [Thread debugging using libthread_db enabled] [New Thread -132384 (LWP 25800)] [New Thread -1222788176 (LWP 24878)] [New Thread -1357939792 (LWP 6008)] [New Thread -1496749136 (LWP 17590)] [New Thread -1630970960 (LWP 15193)] [New Thread -1765192784 (LWP 3824)] [New Thread -1899414608 (LWP 31355)] [New Thread -2038027344 (LWP 30893)] [New Thread 2122718128 (LWP 27619)] [Thread -2038027344 (LWP 30893) exited] /dev/dvb/adapter0/frontend0 : : No such file or directory QLayout "unnamed" added to Q
Bug#385720: m4: INTERNAL ERROR: recursive push_string (fwd)
Eric Blake <[EMAIL PROTECTED]> writes: > In the meantime, perhaps Autoconf should document that > all autom4te input files should always end in newline. Nh. Let's just fix the bug in M4. It's clearly a bug. The GNU tradition is to handle arbitrary input files, and not to insist on "text" files in the POSIX sense. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385957: claimbug: please consider
Package: devscripts Version: 2.9.21 Severity: wishlist http://svn.madduck.net/pub/bin/debian/claimbug Thanks, -- .''`. martin f. krafft <[EMAIL PROTECTED]> : :' : proud Debian developer, author, administrator, and user `. `'` http://people.debian.org/~madduck - http://debiansystem.info `- Debian - when you have better things to do than fixing systems signature.asc Description: Digital signature (GPG/PGP)
Bug#385959: Kino DV editor is on 0.9.2 now (contains many bugfixes), please update Debian packages!
Package: kino Severity: wishlist Kino Digital Video editor is on 0.9.2 now, please update Debian packages! Kino versions 0.9.1 and 0.9.2 Release Notes: * Many bugfixes due to recent changes (0.7.1 - 0.9.0). * W3C SMIL 2.0 compliance in project file format. (Save As dialog supports saving to legacy XML format.) * Export/MPEG can output audio as AC-3 if you have ffmpeg with AC-3 encoding enabled by specifying "ffmpeg" in the Advanced Options/Audio Encoding entry. * Export/MPEG can encode video only by setting the Advanced Options/Audio Encoding entry blank. * Export/MPEG/Advanced values are saved between sessions (maximum 512 characters each). * configure script now requires explicit --with-dv1394 if building without libiec61883 to make deprecation warning more obvious. * bug fixes of bad FFMPEG DV rendering and segfault when saving a project file. -- Labanaktis/Good luck, Mantas Kriaučiūnas Jabber ID: [EMAIL PROTECTED]GPG ID: 43535BD5 Public organization "Open Source for Lithuania" - www.akl.lt
Bug#332781: merge
severity 332781 normal merge 157084 332781 thanks These two bugs are the same problem. Merging them accordingly. Alan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385359: opensync-plugin-syncml: Still not listing plugin in msynctool
Package: opensync-plugin-syncml Version: 0.4.0+svn20060725-4 Followup-For: Bug #385359 Hi, just updated the package on my machine, but it still not listed. Other plugins are listed just fine. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Versions of packages opensync-plugin-syncml depends on: ii libc62.3.6.ds1-4 GNU C Library: Shared libraries ii libglib2.0-0 2.10.3-3The GLib library of C routines ii libopensync0 0.18-2.2Synchronisation framework for emai ii libsyncml0 0.4.0+svn20060721-3 SyncML protocol library ii libxml2 2.6.26.dfsg-3 GNOME XML library opensync-plugin-syncml recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385946: fmit: crashes at startup
On Mon, Sep 04, 2006 at 09:21:12AM +0200, Alexandre Fayolle wrote: > Package: fmit > Version: 0.96.5-1 > Severity: grave > Justification: renders package unusable > > Hi, > > fmit segfaults at startup, before any application window is displayed on > screen: > > $ fmit > Free Music Instrument Tuner version 0.96.5 built at Sep 2 2006 15:25:55 > Install directory '/usr' > CaptureThread: INFO: Built in transports > CaptureThread: INFO:JACK unavailable > CaptureThread: INFO:ALSA available > CaptureThread: INFO: Auto detecting a working transport ... using ALSA > CaptureThread: INFO: ALSA: try to set format to Signed 16 bit Little > Endian success > CaptureThread: WARNING: ALSA: cannot set channel count to one. channels > will be mixed > CaptureThread: INFO: ALSA: try to set sampling rate to 96000 failed > CaptureThread: INFO: ALSA: try to set sampling rate to 48000 success > CaptureThread: WARNING: ALSA: cannot set channel count to one. channels > will be mixed > Segmentation fault > > Running with gdb shows that the stacktrace at crash time is the > following: > > #0 0xe410 in __kernel_vsyscall () > #1 0xa71e6821 in raise () from /lib/tls/i686/cmov/libc.so.6 > #2 0xa71e7fb9 in abort () from /lib/tls/i686/cmov/libc.so.6 > #3 0xa721bc4a in __fsetlocking () from /lib/tls/i686/cmov/libc.so.6 > #4 0xa72234df in mallopt () from /lib/tls/i686/cmov/libc.so.6 > #5 0xa7223582 in free () from /lib/tls/i686/cmov/libc.so.6 > #6 0xa7d7b9cd in XFree () from /usr/lib/libX11.so.6 > #7 0xa7e806e0 in __glXSendLargeImage () from /usr/lib/libGL.so.1 > #8 0xa7e5ad0a in glGetString () from /usr/lib/libGL.so.1 > #9 0xa7e66aa1 in glXMakeCurrentReadSGI () from /usr/lib/libGL.so.1 > #10 0xa7e66b43 in glXMakeCurrent () from /usr/lib/libGL.so.1 > #11 0xa798e0c5 in QGLContext::makeCurrent () from /usr/lib/libqt-mt.so.3 > #12 0xa798a3be in QGLWidget::makeCurrent () from /usr/lib/libqt-mt.so.3 > #13 0xa798f0a3 in QGLWidget::resizeEvent () from /usr/lib/libqt-mt.so.3 > #14 0xa7736976 in QWidget::event () from /usr/lib/libqt-mt.so.3 > #15 0xa7697aea in QApplication::internalNotify () from > /usr/lib/libqt-mt.so.3 > #16 0xa769a49a in QApplication::notify () from /usr/lib/libqt-mt.so.3 > #17 0xa762b3d1 in QApplication::sendEvent () from /usr/lib/libqt-mt.so.3 > #18 0xa7698b12 in QApplication::sendPostedEvents () from > /usr/lib/libqt-mt.so.3 > #19 0xa7738cef in QWidget::show () from /usr/lib/libqt-mt.so.3 > #20 0xa7735b5c in QWidget::showChildren () from /usr/lib/libqt-mt.so.3 > #21 0xa7738f76 in QWidget::show () from /usr/lib/libqt-mt.so.3 > #22 0xa7735b5c in QWidget::showChildren () from /usr/lib/libqt-mt.so.3 > #23 0xa7738f76 in QWidget::show () from /usr/lib/libqt-mt.so.3 > #24 0xa780b660 in QMainWindow::show () from /usr/lib/libqt-mt.so.3 > #25 0x08065148 in QLabel::metaObject () > #26 0xa71d2ea8 in __libc_start_main () from /lib/tls/i686/cmov/libc.so.6 > #27 0x08055531 in ?? () > > > > -- System Information: > Debian Release: testing/unstable > APT prefers unstable > APT policy: (500, 'unstable') > Architecture: i386 (i686) > Shell: /bin/sh linked to /bin/bash > Kernel: Linux 2.6.17-2-686 > Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) > > Versions of packages fmit depends on: > ii freeglut32.4.0-5 OpenGL Utility Toolkit > ii libasound2 1.0.11-7ALSA library > ii libc62.3.6.ds1-4 GNU C Library: Shared libraries > ii libgcc1 1:4.1.1-13 GCC support library > ii libgl1-mesa-glx [libgl1] 6.4.2-1.1 A free implementation of the > OpenG > ii libglu1-mesa [libglu1] 6.4.2-1.1 The OpenGL utility library (GLU) > ii libice6 1:1.0.0-3 X11 Inter-Client Exchange library > ii libjack0.100.0-0 0.101.1-1 JACK Audio Connection Kit > (librari > ii libqt3-mt3:3.3.6-4 Qt GUI Library (Threaded runtime > v > ii libsm6 1:1.0.1-2 X11 Session Management library > ii libstdc++6 4.1.1-13The GNU Standard C++ Library v3 > ii libx11-6 2:1.0.0-8 X11 client-side library > ii libxext6 1:1.0.1-2 X11 miscellaneous extension > librar > ii libxi6 1:1.0.1-3 X11 Input extension library > ii libxmu6 1:1.0.2-2 X11 miscellaneous utility library > ii libxt6 1:1.0.2-2 X11 toolkit intrinsics library > > fmit recommends no packages. > > -- no debconf information > Hello, Thank you for the bug report. The problem seem to be known by upstream, I will contact him today or tomorrow to have more informations, and to solve it. Regards -- .---. Ludovic RESLINGER / \ [EMAIL PROTECTED]@./ Trumpet Student in CNR /`\_/`\ Free Software Developer // )X( \\ | \ : )|_ _,'| .''`. /`\_`> <_/ \ @==TTT=::_ | : :' : \__/'---'\__/
Bug#385956: proposed patch
I'm not sure it's perfect yet, but at least adding 0-9 and _ helps a
bit ;) :
# diff -ibwu check.js.orig check.js
--- check.js.orig 2006-09-04 11:19:33.0 +0200
+++ check.js2006-09-04 11:02:19.0 +0200
@@ -17,6 +17,6 @@
// check url syntax
function checkSyntax (url) {
-var syntax = /^https?:\/\/[-a-zA-Z.\/=%?~]+$/;
+var syntax = /^https?:\/\/[-a-zA-Z0-9.\/=%?~_]+$/;
return syntax.test(url);
}
Best regards,
--
Olivier BERGER <[EMAIL PROTECTED]>
Ingénieur Recherche - Dept INF
INT Evry (http://www.int-evry.fr)
OpenPGP-Id: 1024D/6B829EEC
Bug#381823: infinite loop somewhere in gnome-cups-icon
Same config, same conditions, but a slightly different backtrace : Backtrace was generated from '/usr/bin/gnome-cups-icon' (no debugging symbols found) Using host libthread_db library "/lib/tls/i686/cmov/libthread_db.so.1". (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [Thread debugging using libthread_db enabled] [New Thread -1497082176 (LWP 5830)] [New Thread -1498739792 (LWP 22899)] (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) 0xe410 in __kernel_vsyscall () #0 0xe410 in __kernel_vsyscall () #1 0xa748574b in __waitpid_nocancel () from /lib/tls/i686/cmov/libpthread.so.0 #2 0xa7eb4655 in gnome_gtk_module_info_get () from /usr/lib/libgnomeui-2.so.0 #3 #4 0xe410 in __kernel_vsyscall () #5 0xa7481d76 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/tls/i686/cmov/libpthread.so.0 #6 0xa7534be3 in gnome_cups_request_execute_async () from /usr/lib/libgnomecups-1.0.so.1 #7 0xa7532ad4 in gnome_cups_printer_set_default () from /usr/lib/libgnomecups-1.0.so.1 #8 0xa7532d20 in _gnome_cups_printer_init () from /usr/lib/libgnomecups-1.0.so.1 #9 0xa7532d09 in _gnome_cups_printer_init () from /usr/lib/libgnomecups-1.0.so.1 #10 0xa7406684 in ?? () from /usr/lib/libglib-2.0.so.0 #11 0xafb0f3d8 in ?? () #12 0xa73a5556 in g_source_get_current_time () from /usr/lib/libglib-2.0.so.0 #13 0xa73a5556 in g_source_get_current_time () from /usr/lib/libglib-2.0.so.0 #14 0xa73a4e2c in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0 #15 0xa73a8176 in g_main_context_check () from /usr/lib/libglib-2.0.so.0 #16 0xa73a8537 in g_main_loop_run () from /usr/lib/libglib-2.0.so.0 #17 0xa7af04e1 in gtk_main () from /usr/lib/libgtk-x11-2.0.so.0 #18 0x0804bd92 in ?? () #19 0x0805b000 in ?? () #20 0x0804cde4 in _IO_stdin_used () #21 0x0804bb20 in ?? () #22 0x in ?? () Thread 2 (Thread -1498739792 (LWP 22899)): #0 0xe410 in __kernel_vsyscall () No symbol table info available. #1 0xa7484b48 in recv () from /lib/tls/i686/cmov/libpthread.so.0 No symbol table info available. #2 0xa750f0ef in httpRead2 () from /usr/lib/libcups.so.2 No symbol table info available. #3 0xa751551a in ippDelete () from /usr/lib/libcups.so.2 No symbol table info available. #4 0xa7513c11 in ippReadIO () from /usr/lib/libcups.so.2 No symbol table info available. #5 0xa7513ead in ippRead () from /usr/lib/libcups.so.2 No symbol table info available. #6 0xa751f1f2 in cupsDoFileRequest () from /usr/lib/libcups.so.2 No symbol table info available. #7 0xa751f771 in cupsDoReq
Bug#385863: System Information (hardinfo) no open
Hi, in the menu Applications>System Tools>System Information (Hardinfo). When I do click, no open utility. No run, you know? 2006/9/3, Martin Michlmayr <[EMAIL PROTECTED]>: * Enrique Quezada Riveros <[EMAIL PROTECTED]> [2006-09-03 09:59]: > Package: System Information > Version: I can't see > > The package no work. What doesn't work? -- Martin Michlmayr http://www.cyrius.com/ -- Linux Registered User # 417515 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#348316: faubackup: Return with non-zero exit value on full disk
hoi :) On Mon, Sep 04, 2006 at 10:26:31AM +0200, Jan-Benedict Glaw wrote: > One of my backup systems went out of disk space last night. I saw the > disk full message, but faubackup exited with return code zero... hmm, that should not happen. I will have a look at it. -- Martin Waitz signature.asc Description: Digital signature
Bug#337570: xprint: Maybe the same bug
Drew Parsons wrote: On Fri, 2006-09-01 at 21:09 +0200, Eugen Dedu wrote: The same for me, with the same message (I tried both print and print to file). I work on powerpc and use: [..] I'm not experiencing this crash with the new version of xprint from experimental. I'll be able to bring it into unstable in a couple more The version in experimental is available only for i386 :o( http://packages.debian.org/cgi-bin/search_packages.pl?searchon=names&version=all&exact=1&keywords=xprint Eugen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385958: gnome-session: Startup fails with my configuration
Package: gnome-session Version: 2.14.3-1 Severity: important There is something weird happening when I attempt to start GNOME with my session settings (included below), namely the startup begins normally and then kaboom the session ends prematurely and I am returned to the login manager (or shell where startx was invoked). My prime suspect for this behaviour is the fact that I am using two display setup without Xinerama and therefor there has to be two instances of my favourite window manager FVWM (currently from Debian package fvwm-gnome 2.5.17-1) and given that there has already been reports on that gnome-session fails to launch multiple instances of xterm, my problems may be related to that. I've tried with another user account, where the window manager is sawfish and there seems to be no problem. Also on a laptop I manage to run the very same GNOME and FVWM versions fine, but there I have just one screen, so the problem most likely has something to do with my desktop dualhead X configuration. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=C, LC_CTYPE=fi_FI (charmap=ISO-8859-1) Versions of packages gnome-session depends on: ii gconf2 2.14.0-4GNOME configuration database syste ii gnome-control-center 1:2.14.2-3 utilities to configure the GNOME d ii libatk1.0-0 1.12.1-1The ATK accessibility toolkit ii libbonobo2-0 2.14.0-1Bonobo CORBA interfaces library ii libc62.3.6.ds1-4 GNU C Library: Shared libraries ii libesd0 0.2.36-3Enlightened Sound Daemon - Shared ii libgconf2-4 2.14.0-4GNOME configuration database syste ii libglib2.0-0 2.10.3-3The GLib library of C routines ii libgnome-desktop-2 2.14.3-1Utility library for loading .deskt ii libgnome2-0 2.14.1-3The GNOME 2 library - runtime file ii libgnomeui-0 2.14.1-2The GNOME 2 libraries (User Interf ii libgtk2.0-0 2.8.20-1The GTK+ graphical user interface ii libice6 1:1.0.0-3 X11 Inter-Client Exchange library ii liborbit21:2.14.0-2 libraries for ORBit2 - a CORBA ORB ii libpango1.0-01.12.3-2Layout and rendering of internatio ii libsm6 1:1.0.1-2 X11 Session Management library ii libwrap0 7.6.dbs-11 Wietse Venema's TCP wrappers libra ii libx11-6 2:1.0.0-8 X11 client-side library ii libxau6 1:1.0.0-4 X11 authorisation library ii libxrandr2 2:1.1.0.2-4 X11 RandR extension library Versions of packages gnome-session recommends: ii dbus 0.62-4 simple interprocess messaging syst ii desktop-base 0.3.17 common files for the Debian Deskto ii gnome-panel 2.14.3-1launcher and docking facility for ii metacity 1:2.14.5-1 A lightweight GTK2 based Window Ma ii nautilus 2.14.3-1file manager and graphical shell f ii sawfish 1:1.3+cvs20060518-3 a window manager for X11 -- no debconf information -- my .gnome2/session [Default] 0,id=117f010001036080598001160 0,Program=swisswatch 0,CloneCommand=swisswatch -g -5+5 0,RestartCommand=swisswatch -g -5+5 1,id=117f019382912080006310007 1,RestartStyleHint=2 1,Priority=40 1,Program=gnome-panel 1,CurrentDirectory=/home/hezu 1,CloneCommand=gnome-panel --sm-config-prefix /gnome-panel-tLMLI7/ --profile default 1,RestartCommand=gnome-panel --sm-config-prefix /gnome-panel-tLMLI7/ --sm-client-id 117f019382912080006310007 --screen 0 --profile default 2,id=11c0a800010001077701252013001 2,Program=hardware-monitor 2,CurrentDirectory=/home/hezu 2,CloneCommand=hardware-monitor --sm-config-prefix /hardware-monitor-Ry5nfh/ 2,RestartCommand=hardware-monitor --sm-config-prefix /hardware-monitor-Ry5nfh/ --sm-client-id 11c0a800010001077701252013001 --screen 0 3,id=11c0a8000100010776703740032340062 3,Program=xterm 3,CloneCommand=xterm -g +560+806 3,RestartCommand=xterm -xtsessionID 11c0a8000100010776703740032340062 -g +560+806 4,id=11c0a8000100010777014170130010003 4,Program=xterm 4,CloneCommand=xterm -display :0.1 -g +1+25 -T Muffin\\ window 4,RestartCommand=xterm -xtsessionID 11c0a8000100010777014170130010003 -display :0.1 -g +1+25 -T Muffin\\ window 5,id=11c0a8000100010777014350130010004 5,Program=xterm 5,CloneCommand=xterm -fn -sony-fixed-medium-r-normal--16-120-100-100-c-80-iso8859-1 -g -1+150 5,RestartCommand=xterm -xtsessionID 11c0a8000100010777014350130010004 -fn -sony-fixed-medium-r-n
Bug#384596: Buggy serial bus support
Hi, I changed the mouse for the same one but with a PS/2 connector. Since I do not have any more any problems. It seems that the support of the serial bus is buggy, in particular when one click with the left boutton. Regards. -- == | FREDERIC MASSOT | | http://www.juliana-multimedia.com | | mailto:[EMAIL PROTECTED] | ===Debian=GNU/Linux=== -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#359707: Status?
Hi, What is the current status of this bug? Have you any plans to upload 0.9.4 soon? If you need any help preparing this upload feel free to give me a shout - I'd like to see Eterm release with Etch. Thanks, Alan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385881: tinysnmp-agent: does not start due to libabz0 ABI change
Hi Steve >@2006.09.03_23:26:54_+0200 > reassign 385881 libabz0 > found 385881 0.6.3 > thanks > > On Sun, Sep 03, 2006 at 08:45:26PM +0300, Niko Tyni wrote: > > starting tinysnmp-agent currently fails on current sid with: > > > # /etc/init.d/tinysnmp-agent start > > Starting router-monitoring daemon: tinysnmpd/usr/sbin/tinysnmpd: symbol > > lookup error: /usr/sbin/tinysnmpd: undefined symbol: tokens_parse > > . > > > This happens because of this change in libabz0 0.6.3: > > > In my understanding, the right fix is to either revert the change > > in libabz or to bump its soname and recompile tinysnmp (and other > > reverse-depends as well.) > > Correct, and therefore reassigned to libabz0. > > (And why is libabz a native package?) Because I wrote it? -- Regards Abraham ___ Abraham vd Merwe - The Debian Project 1st Floor, Albion Springs, 183 Main Road, Newlands Phone: +27 21 689 3867 Cell: +27 82 565 4451 Http: http://people.debian.org/~abz/ Email: [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385785: installation failure
On Sun, Sep 03, 2006 at 01:37:22PM -0400, [EMAIL PROTECTED] wrote: > On Sun, 3 Sep 2006 08:39:36 +0200, "Christian Perrier" > > > Can you run "(lspci ; lspci -n)|sort" on that machine > > Then send us the output relevant to your NIC and > > the interface your CD is attached on. > > [ "I don't understand the request, I don't dare to ask what > (lspci ; lspci -n)| sort -n > means. I just do > lspci > lspci -n > and see want happens. > I even don't care to filter the relevant parts ] That is what I did read. This is more what was expected: :00:07.1 0101: 8086:7111 (rev 01) :00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) :00:0d.0 0100: 9004:8178 :00:0d.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U :00:12.0 0180: 1095:3112 (rev 02) :00:12.0 Unknown mass storage controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3112 [SATALink/SATARaid] Serial ATA :00:14.0 0200: 1113:1211 (rev 10) :00:14.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10) Question: > > the interface your CD is attached on. Geert Stappers -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385949: initramfs-tools: lilo not run after installation; system did not boot any more
On Mon, Sep 04, 2006 at 11:09:38AM +0200, Sebastien Blondeel wrote: > On Mon, Sep 04, 2006 at 10:53:09AM +0200, maximilian attems wrote: > > i need more information, please post the output of > > Thanks for the quick reaction. sure, sorry for the trouble, please keep bugreport on cc. > > cat /etc/kernel-img.conf > > # cat /etc/kernel-img.conf > # Do not create symbolic links in / > do_symlinks = No > # Fri Aug 18 23:01:26 CEST 2006 > # message from ``Configuring linux-image-2.6.16-2-k7'' > do_initrd = Yes if you want to have lilo run at the end of an linux-image install or after an update of an initramfs you need to add to aboves file: do_bootloader = Yes or if you use grub do_bootloader = no > > ls -l /etc/lilo.conf > > # ls -l /etc/lilo.conf > -rw-r- 1 root root 4587 2006-09-04 09:42 /etc/lilo.conf ok > > ls -l /sbin/lilo > > # ls -l /sbin/lilo > -rwxr-xr-x 1 root root 602 2006-07-31 22:27 /sbin/lilo detto > > dpkg -l grub > > # dpkg -l grub > Desired=Unknown/Install/Remove/Purge/Hold > | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed > |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: > uppercase=bad) > ||/ NameVersion Description > +++-===-===-== > ii grub0.97-13 GRand Unified > Bootloader hmm you have both installed, without indication of which one to run, so you need to run lilo manualy on upgrades of linux-image or after update-initramfs runs. as lilo stores an hardcoded block and has no idea about the fs > Note on this last one: I had tried to switch to grub typing "apt-get install > grub" but this did nothing and I did not insist (I''l try to make the actual > switch today). Maybe this is what fooled your installation scripts into > thinking re-rerunning "lilo" was not necessary? try to use grub-install or grub directly http://www.itp.tuwien.ac.at/~mattems/blog/2006/01/18#grub_install best regards -- maks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385857: [Pkg-bluetooth-maintainers] Bug#385857: please upgrade to bluez-utils and bluez-libs 3.4
Hi, On Mon, Sep 04, 2006 at 12:52:40PM +0200, Marcel Holtmann wrote: > the 3.5 is coming really soon and fixes another couple of rare race > conditions that can lead to segmentation faults of hcid. The 3.1 version > is not really suited for daily use. allright, I'm going to wait for bluez 3.5 and then package it. > > > bluez-libs compiled out of the box by just unpacking and moving the > > debian directory over, but bluez-utils needs some work: > > > > * remove bluez-bcm203x package (bcm203x firmware loader removed upstream) > > Not needed at all. You don't wanna support a 2.4 kernel and even if you > really want to, you won't find any of these devices anymore. For all 2.6 > kernels the bcm203x kernel module takes care of loading the firmware. I'm going to drop it after etch release when we'll discontinue support for 2.4 kernels. > > This package has to die and from an USB and udev perspective it was a > really nasty hack. > > > * remove 000_rfcomm_conf_example.patch: the example is already commented > > * remove 004_rfcomm_usage.patch: applied upstream > > Sometimes it is a good idea to feed patches back to upstream so I don't > have to extract them from the packages. yep, I'm used to do it, I must have overlooked these patches. > They are a fully replacement for the ones in the Debian package. That is > another thing that always needs to be discussed with upstream. indeed, this has been discussed extensively in http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=378839 and on bluez-devel > > To install them --enable-pcmciarules is needed and the correct configure > call. Example is in the README. Otherwise the wrong directory will be > picked for them. okay, thanks. filippo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#379476: broken ca.po
Hi Jordi, On Thu, Aug 17, 2006 at 01:31:27PM +0200, Robert Millan wrote: > It appears that the ca.po you attached has been truncated. > > Btw, I reviewed the current translation and found a pair of mistakes. Please > could you include the attached (2 hunk) patch in your next revision? > > (note: my patch is already converted to UTF-8) May I remind? I plan doing an adduser upload later this week and would like to include the catalan update. Greetings Marc -- - Marc Haber | "I don't trust Computers. They | Mailadresse im Header Mannheim, Germany | lose things."Winona Ryder | Fon: *49 621 72739834 Nordisch by Nature | How to make an American Quilt | Fax: *49 621 72739835 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385213: texlive-latex-extra: caption3 package is not provided but needed
Hi Frank! On Mon, 04 Sep 2006, Frank Küster wrote: > > Next revision of the package will recommend texlive-latex-recommended > > (but then, who installs latex-extra without latex-recommended? Most > > things wont work..) > > This sounds as if texlive-latex-extra should actually Depend on > -recommended. No, I want to leave it to recommends. Why: - packages *can* work, but not necessarily all of them - latex-extra should be installable with tetex Best wishes Norbert -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385913: vim-scripts: ftplugin's po.vim is not matching fuzzy and unstranslated strings
Am Sonntag, den 03.09.2006, 19:40 -0300 schrieb Andre Luis Lopes: > ftplugin's po.vim functionality of matching the next fuzzy and the next > unstralated strings, as well as matching a fuzzy or a unstranstaled string > forward isn't working. It all works for me, both in console and GUI vim, both with my own .vimrc and yours. Do the other keybindings of the plugin work? Does ‘:map’ list anything suspicious? Bye, Mike -- |=| Michael Piefel |=| Member of the Debian project
Bug#353116: why is this an important dselect bug?
Hi, I can see why #351406 was cloned to dselect... Date: Thu, 16 Feb 2006 10:53:46 +0100 From: Loïc Minier <[EMAIL PROTECTED]> To: Gary Koskenmaki <[EMAIL PROTECTED]>, [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: Re: Rhythmbox: No volume slider, does not play radio stations or library music Message-ID: <[EMAIL PROTECTED]> <...> This was a missing installation of gstreamer0.10-alsa, which is presumably a synaptic + apt-get problem, and a dselect problem on installs and upgrades. <...> ...but a little later on... Date: Tue, 28 Feb 2006 16:24:51 +0100 From: Loïc Minier <[EMAIL PROTECTED]> To: Filipus Klutiero <[EMAIL PROTECTED]> Cc: [EMAIL PROTECTED] Subject: Re: Shouldn't make Recommends useless Message-ID: <[EMAIL PROTECTED]> <...> (BTW, dselect does install Recommends by default.) <...> ...and #353115 has been downgraded to wishlist. Even if this issue crops up with dselect+apt-method[1], it is an APT problem and can be worked around in dselect simply by using a different access method. I think this bug should be closed. - Bruce [1] I may have seen it twice in all the time dselect has supported the APT access method, but both times I was aiming for a broken installation (just wanted part of a suite) and didn't feel like wget + dpkg -i.
Bug#385887: ITP: daemonize -- run a command as a Unix daemon
On Sun, 03 Sep 2006 21:35:03 +0200, Stanley Jaddoe <[EMAIL PROTECTED]> wrote: >Most programs that are designed to be run as daemons do that work for >themselves. However, you?ll occasionally run across one that does not. When you >must run a daemon program that does not properly make itself into a true Unix >daemon, you can use daemonize to force it to run as a true daemon. |Package: daemon |Version: 0.6.3-1 |Description: turns other processes into daemons | There are many tasks that need to be performed to correctly set up a | daemon process. This can be tedious. Daemon performs these tasks for | other processes. This is useful for writing daemons in languages other | than C, C++ or Perl (e.g. /bin/sh, Java). | . | If you want to write daemons in languages that can link against C functions | (e.g. C, C++), see libslack which contains the core functionality of daemon. | . | Upstream URL: http://www.libslack.org/daemon/ Can daemonize do things that daemon cannot? Greetings Marc -- -- !! No courtesy copies, please !! - Marc Haber | " Questions are the | Mailadresse im Header Mannheim, Germany | Beginning of Wisdom " | http://www.zugschlus.de/ Nordisch by Nature | Lt. Worf, TNG "Rightful Heir" | Fon: *49 621 72739834
Bug#321505: the default collation should be latin1_general_ci instead of latin1_swedish_ci
Hello, I really don't understand why latin1_swedish_ci is used as default instead of latin1_general_ci which is "general" as its name says... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385928: RFA: ncurses -- Shared libraries for terminal handling (32-bit)
Daniel Jacobowitz wrote: > I request an adopter for the ncurses package. I would like to adopt it if you agree. -- Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist Email: [EMAIL PROTECTED] Internet: http://people.panthera-systems.net/~daniel-baumann/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#366855: Please support mirroring of pdiff files
Hi,
not having found anything similar yet, I have extended debmirror to
support Packages and Sources pdiff files. The patch below makes
debmirror download {Packages,Sources}.diff/Index files in case they
exist, and fetches the appropriate pdiff files. I payed attention not
to mess up the overall download statistics, but the percentages shown
during the Packages and Sources download phase will not represent
the actual progress.
As I am employing debmirror on a 4 Mb flash device (OpenWRT router)
with only 32 Mb of RAM and a 200 MHz CPU (mipsel), I did not dare to
actually use the pdiff files for patching Packages or Sources files
and saving some bandwidth, especially in light of seeing how much
CPU power the rred patch algorithm uses even on faster machines
(for example my Pentium-M laptop throttled to 600 MHz).
Another feature still missing is Contents.diff support.
Contents-*.diff/Index files are not listed in the Release file, so
it is not known whether these exist or not prior to actually
downloading them. However, the remote_get method triggers an error
upon failure, so a "query" method would have to be implemented for
all supported download methods (ftp, hftp, http, rsync).
Regards,
Peter
diff -urN debmirror-20051209~/debian/control debmirror-20051209/debian/control
--- debmirror-20051209~/debian/control 2004-12-09 18:56:46.0 +0100
+++ debmirror-20051209/debian/control 2006-09-03 16:17:31.0 +0200
@@ -6,7 +6,7 @@
Package: debmirror
Architecture: all
-Depends: libnet-perl, libdigest-md5-perl, liblockfile-simple-perl, rsync,
libcompress-zlib-perl, bzip2, libwww-perl
+Depends: libnet-perl, libdigest-md5-perl, liblockfile-simple-perl, rsync,
libcompress-zlib-perl, bzip2, libwww-perl, libdigest-sha1-perl
Recommends: gnupg
Description: Debian partial mirror script, with ftp and package pool support
This program downloads and maintains a partial local Debian mirror.
diff -urN debmirror-20051209~/debmirror debmirror-20051209/debmirror
--- debmirror-20051209~/debmirror 2005-12-09 19:13:09.0 +0100
+++ debmirror-20051209/debmirror2006-09-04 11:17:49.0 +0200
@@ -355,6 +355,7 @@
use LockFile::Simple;
use Compress::Zlib;
use Digest::MD5;
+use Digest::SHA1;
use LWP::UserAgent;
# Yeah, I use too many global variables in this program.
@@ -468,8 +469,9 @@
say("Download at most $rsync_batch files per rsync call.") if
($download_method eq "rsync");
say("Dry run.") if $dry_run_var;
-my $md5;
+my ($md5, $sha1);
$md5=Digest::MD5->new;
+$sha1=Digest::SHA1->new;
# Set up mirror directory and resolve $mirrordir to a full path for
# locking and rsync
@@ -634,6 +636,7 @@
add_bytes("dists/$dist/$section/binary-$arch/Packages.gz");
add_bytes("dists/$dist/$section/binary-$arch/Packages.bz2");
add_bytes("dists/$dist/$section/binary-$arch/Release");
+ add_bytes("dists/$dist/$section/binary-$arch/Packages.diff/Index");
}
# d-i has no sources over there, sources are in main
next if ($section =~ /debian-installer/);
@@ -642,6 +645,7 @@
add_bytes("dists/$dist/$section/source/Sources.gz");
add_bytes("dists/$dist/$section/source/Sources.bz2");
add_bytes("dists/$dist/$section/source/Release");
+ add_bytes("dists/$dist/$section/source/Sources.diff/Index");
}
}
}
@@ -650,10 +654,12 @@
add_bytes("$_/Packages.gz");
add_bytes("$_/Packages.bz2");
add_bytes("$_/Release");
+ add_bytes("$_/Packages.diff/Index");
if ($do_source) {
add_bytes("$_/Sources");
add_bytes("$_/Sources.gz");
add_bytes("$_/Sources.bz2");
+add_bytes("$_/Sources.diff/Index");
}
}
if ($getcontents) {
@@ -1059,6 +1065,25 @@
return 0;
}
+# Check uncompressed pdiff content against sha1sum from Index file.
+sub check_pdiff {
+ my ($filename, $size, $sha1sum)[EMAIL PROTECTED];
+ my $ret=0;
+
+ if (-f "$filename.gz") {
+system_redirect_io("gunzip", "$filename.gz", "$filename");
+if ($size == -s $filename) {
+ open HANDLE, $filename or
+die "$filename: $!";
+ $sha1->addfile(*HANDLE);
+ my $digest = $sha1->hexdigest;
+ $ret = ($sha1sum eq $digest);
+}
+unlink ($filename);
+ }
+ return $ret;
+}
+
# Check file against md5sum and size from the Release file.
# It will return true if the md5sum matches.
sub check_lists {
@@ -1340,15 +1365,35 @@
$bytes_gotten += $file_lists_size{"$tempdir/$subdir/Release"};
}
}
+ if (exists $file_lists_size{"$tempdir/$subdir/Packages.diff/Index"}) {
+if (!check_lists ("$tempdir/$subdir/Packages.diff/Index")) {
+ make_dir("$subdir/Packages.diff");
+ make_dir("$tempdir/$subdir/Packages.diff");
+ say("$subdir/Packages.diff/Index needs fetch");
+ remote_get("$subdir/Packages.diff/Index");
+ if (!check_lists ("$tempdir/$subdir/Packages.diff/Index")) {
+ say("$subdir/Packages.diff/Index failed md5sum check, removing");
+ push (@errlog,"$subdir/Packages.diff/Index fa
Bug#321505: the default collation should be latin1_general_ci instead of latin1_swedish_ci
On 2006-09-04 [EMAIL PROTECTED] wrote: > I really don't understand why latin1_swedish_ci is used as default instead of > latin1_general_ci which is "general" as its name says... Backwards compatibility with older mysql versions. bye, -christian- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385857: [Pkg-bluetooth-maintainers] Bug#385857: please upgrade to bluez-utils and bluez-libs 3.4
Hi Filippo, > > the 3.5 is coming really soon and fixes another couple of rare race > > conditions that can lead to segmentation faults of hcid. The 3.1 version > > is not really suited for daily use. > > allright, I'm going to wait for bluez 3.5 and then package it. should be out this week. If I am not going to be to distracted at the Linux-Kongress. > > > bluez-libs compiled out of the box by just unpacking and moving the > > > debian directory over, but bluez-utils needs some work: > > > > > > * remove bluez-bcm203x package (bcm203x firmware loader removed upstream) > > > > Not needed at all. You don't wanna support a 2.4 kernel and even if you > > really want to, you won't find any of these devices anymore. For all 2.6 > > kernels the bcm203x kernel module takes care of loading the firmware. > > I'm going to drop it after etch release when we'll discontinue support for 2.4 > kernels. You can drop it now actually. A Liunx 2.4 kernel user and owner of this device is a really really unlikely combination. I mean it. It would take me at least a couple of hours to find my dongle. > > This package has to die and from an USB and udev perspective it was a > > really nasty hack. > > > > > * remove 000_rfcomm_conf_example.patch: the example is already commented > > > * remove 004_rfcomm_usage.patch: applied upstream > > > > Sometimes it is a good idea to feed patches back to upstream so I don't > > have to extract them from the packages. > > yep, I'm used to do it, I must have overlooked these patches. Do you have any other patches that are not upstream? > > They are a fully replacement for the ones in the Debian package. That is > > another thing that always needs to be discussed with upstream. > > indeed, this has been discussed extensively in > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=378839 and on bluez-devel > > > > > To install them --enable-pcmciarules is needed and the correct configure > > call. Example is in the README. Otherwise the wrong directory will be > > picked for them. > > okay, thanks. Please test the installation. The current version contains a nasty hack to get them into the right place. And please drop your passkey agent think completely. This will be distribution specific and can't be a solution. It is better to put the passkey-agent.c example in the docs directory as an example and mention it in a README.Debian. That said. I am missing a package for bluez-gnome which contains the graphical passkey agent. New version is coming up also this week. It will fix a small glitch with the status icon. Regards Marcel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385960: mysql-dfsg-5.1: default charset modified in last release
Package: mysql-dfsg-5.1 Version: accentued characters doesn't show right Severity: important Since I upgraded to the last testing version of mysql (5.0.24-3) all accentuated characters in databases are rotten. I always used iso-8859-15 as charset for all my databases, but it seems that the upgrade modified something in the parameters to use utf-8 instead. I would like to know how I could get back the previous behaviour. For the moment all my databases are unusable -- System Information: Debian Release: testing/unstable APT prefers proposed-updates APT policy: (500, 'proposed-updates'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.20 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385958: gnome-session: Startup fails with my configuration
Le lundi 04 septembre 2006 à 12:12 +0300, Heikki Kantola a écrit : > Package: gnome-session > Version: 2.14.3-1 > Severity: important > > There is something weird happening when I attempt to start GNOME with > my session settings (included below), namely the startup begins > normally and then kaboom the session ends prematurely and I am > returned to the login manager (or shell where startx was invoked). > My prime suspect for this behaviour is the fact that I am using > two display setup without Xinerama and therefor there has to be two > instances of my favourite window manager FVWM (currently from Debian > package fvwm-gnome 2.5.17-1) and given that there has already been > reports on that gnome-session fails to launch multiple instances of > xterm, my problems may be related to that. I've tried with another > user account, where the window manager is sawfish and there seems to > be no problem. Also on a laptop I manage to run the very same GNOME > and FVWM versions fine, but there I have just one screen, so the > problem most likely has something to do with my desktop dualhead X > configuration. It looks like "just another libxklavier crash"... Question 1: after that happens, is there a trace of a crash in /var/log/Xorg.0.log.old ? Question 2: what if you run: gconftool-2 -- recursive-unset /desktop/gnome/peripherals/keyboard/bell_custom_file -- .''`. Josselin Mouette/\./\ : :' : [EMAIL PROTECTED] `. `'[EMAIL PROTECTED] `- Debian GNU/Linux -- The power of freedom
Bug#385747: [DebianGIS-dev] Bug#385747: libgdal1-1.3.2-dev: gdal-config reports wrong path for -L and -I (/tmp/buildd/gdal-1.3.2/debian/tmp/*)
On Sat, Sep 02, 2006 at 08:54:54PM +0200, Sylvain Joyeux wrote: > Package: libgdal1-1.3.2-dev > Version: 1.3.2-2 > Severity: normal > > > The gdal-config utility reports wrong path for -L and -I: > [~]% gdal-config --libs > -L/tmp/buildd/gdal-1.3.2/debian/tmp/usr/lib -lgdal1.3.2 > > [~]% gdal-config --cflags > -I/tmp/buildd/gdal-1.3.2/debian/tmp/usr/include > > This is not a problem since /usr/lib and /usr/include are searched > by default, but it is a bug anyway > Uhm, nice. This could potentially introduce some subdle bug in compiling dependencies... -- Francesco P. Lovergine -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385213: texlive-latex-extra: caption3 package is not provided but needed
Norbert Preining <[EMAIL PROTECTED]> wrote: > Hi Frank! > > On Mon, 04 Sep 2006, Frank Küster wrote: >> > Next revision of the package will recommend texlive-latex-recommended >> > (but then, who installs latex-extra without latex-recommended? Most >> > things wont work..) >> >> This sounds as if texlive-latex-extra should actually Depend on >> -recommended. > > No, I want to leave it to recommends. Why: > - packages *can* work, but not necessarily all of them > - latex-extra should be installable with tetex That's a good point. Regards, Frank -- Frank Küster Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich Debian Developer (teTeX/TeXLive)
Bug#305227: ITP: libdom4j-java -- flexible XML framework for Java
reopen 305227 block 385569 by 305227 thanks Re-opening this. It is needed to package JBoss. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385319: r2e run hangs and doesn't finish
Il giorno ven, 01/09/2006 alle 19.17 -0400, Joey Hess ha scritto: > I have a suspicion that it's sendmail that's really hanging. You might > see it as a child process of r2e when it's locked. I made a try switching from smtp to sendmail in r2e config.py. I have the same situation but I see a lot of postfix sendmail zombie process! Christian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#383905: gnome-btdownload prevents move to new python version
This patch updates the package for the new Python policy, required for
Etch.
Gerardo, if you agree I can NMU the package in a week.
Ciao
~marco
diff -Naur gnome-btdownload-0.0.22/debian/control gnome-btdownload-0.0.22.patched/debian/control
--- gnome-btdownload-0.0.22/debian/control 2006-09-04 12:14:47.0 +0200
+++ gnome-btdownload-0.0.22.patched/debian/control 2006-09-04 12:12:53.0 +0200
@@ -2,13 +2,13 @@
Section: net
Priority: optional
Maintainer: Gerardo Curiel <[EMAIL PROTECTED]>
-Build-Depends-Indep: python (>= 2.3.0), intltool, gconf2
-Build-Depends: cdbs, debhelper (>= 5.0.32)
-Standards-Version: 3.7.0
+Build-Depends: cdbs, debhelper (>= 5.0.32), python-central, intltool, gconf2
+Standards-Version: 3.7.2
+XS-Python-Version: >= 2.4
Package: gnome-btdownload
Architecture: all
-Depends: bittorrent (>= 3.2), python2.3 (>= 2.3), python(<<2.4), python-gtk2, python-gnome2, python-glade2 (>= 2.0.0), ${misc:Depends}, ${shlibs:Depends}, ${python:Depends}
+Depends: ${misc:Depends}, ${python:Depends}, bittorrent (>= 3.2), python-gtk2, python-gnome2, python-glade2 (>= 2.0.0)
Description: Gnome interface for 'executing' BitTorrent files
A simple Gnome interface designed as a mime-sink for BitTorrent files.
gnome-btdownload allow a user to download files using bittorrent,
diff -Naur gnome-btdownload-0.0.22/debian/patches/07_python23_depends.patch gnome-btdownload-0.0.22.patched/debian/patches/07_python23_depends.patch
--- gnome-btdownload-0.0.22/debian/patches/07_python23_depends.patch 2006-09-04 12:14:47.0 +0200
+++ gnome-btdownload-0.0.22.patched/debian/patches/07_python23_depends.patch 1970-01-01 01:00:00.0 +0100
@@ -1,8 +0,0 @@
src/gnome-btdownload.orig 2006-05-09 01:03:44.0 -0400
-+++ src/gnome-btdownload 2006-05-09 01:03:57.0 -0400
-@@ -1,4 +1,4 @@
--#!/usr/bin/python
-+#!/usr/bin/python2.3
-
- # BitTorrent related modules.
- import BitTorrent.download, BitTorrent.bencode
diff -Naur gnome-btdownload-0.0.22/debian/pycompat gnome-btdownload-0.0.22.patched/debian/pycompat
--- gnome-btdownload-0.0.22/debian/pycompat 1970-01-01 01:00:00.0 +0100
+++ gnome-btdownload-0.0.22.patched/debian/pycompat 2006-09-04 12:13:14.0 +0200
@@ -0,0 +1 @@
+2
diff -Naur gnome-btdownload-0.0.22/debian/rules gnome-btdownload-0.0.22.patched/debian/rules
--- gnome-btdownload-0.0.22/debian/rules 2006-09-04 12:14:47.0 +0200
+++ gnome-btdownload-0.0.22.patched/debian/rules 2006-09-04 12:13:51.0 +0200
@@ -9,3 +9,7 @@
install/gnome-btdownload::
install -m644 debian/gnome-btdownload.mime debian/gnome-btdownload/usr/lib/mime/packages/gnome-btdownload
+
+binary-install/gnome-btdownload::
+dh_pycentral
+dh_python -V 2.4
signature.asc
Description: Questa è una parte del messaggio firmata digitalmente
Bug#385962: xcache: Please do not abuse debconf
Package: xcache Version: 1.0-1 Severity: minor Hi, The debconf-devel(7) manual states that note templates should be used only for important notes that the user really should see. The policy also ask maintainers to "try to minimize the amount of prompting they need to do" (section 3.9.1). Displaying a note with a low priority really shows that the note is not very important. Your two notes should therefore be moved to a README.Debian. Cheers, -- Thomas Huriaux signature.asc Description: Digital signature
Bug#385294: Acknowledgement (konsole: vi/vim causes titlebar text repetition
Update:
This seems to be solved if the environment variable $PROMPT_COMMAND is not
unset. For example, doing
export PROMPT_COMMAND=echo -ne
"\033]0;[EMAIL PROTECTED]:${PWD/$HOME/~}\007"
effectively changes the text in the text in the titlebar, and invoking vim
doesn't append unuseful "trash". However, doing again
unset PROMPT_COMMAND
returns to the previous condition.
_
MSN Messenger: converse com os seus amigos online.
http://messenger.msn.com.br
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385960: mysql-dfsg-5.1: default charset modified in last release
Hello On 2006-09-04 tech wrote: > Package: mysql-dfsg-5.1 > Version: accentued characters doesn't show right > Severity: important > > Since I upgraded to the last testing version of mysql (5.0.24-3) > all accentuated characters in databases are rotten. The bug report says "mysql-dfsg-5.1" above? This is a version that is only available in experimental. Please show dpkg -l "*mysql*" | grep ^.i to see what package versions you really have installed. > I always used iso-8859-15 as charset for all my databases, but it seems that > the upgrade modified something in the parameters to use utf-8 instead. I > would like to know how I could get back the previous behaviour. For the > moment all my databases are unusable As far as I know that have been no changes to the locales. Can you show SHOW CREATE DATABASE xxx; SHOW CREATE TABLE xxx.yyy; SHOW VARIABLES LIKE "char%"; to see which charset is configured for your tables. You might also want to lookup dev.mysql.com -> Manual -> History to see if there have been any changes in between 5.0.23 and 5.0.24 that are related. bye, -christian- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385961: apt-cacher: cache cleanup fails and requires manual intervention
Package: apt-cacher Version: 1.5.3 Severity: normal Hi, sometimes i get messages like this from cron.daily: | zcat: | /var/cache/apt-cacher/temp/somehost.mine.nu_debian_unstable_Packages.gz: unexpected end of file | Error processing somehost.mine.nu_debian_unstable_Packages.gz in /var/cache/apt-cacher/packages, cleanup stopped. | Remove the file if the repository is no longer interesting and the packages pulled from it are to be removed. | run-parts: /etc/cron.daily/apt-cacher exited with return code 1 Presumably a user has accessed an unreliable or unreachable server using the http://proxy-host:3142/ftp.something.unofficial/ notation. I have to delete that packages.gz file manually to make the cleanup process work again. As the proxy ist set up correctly, it should not bother the admin with this problem, but proceed and do something with such repositories, e.g. delete them completely if the server is unreachable for a configurable amount of days. Best regards, - Dietrich -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-1-k7 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385900: [pkg-ggz-maintainers] Bug#385900: suggests nonexistent package
Alle 22:32, domenica, 3. settembre 2006, Peter Eisentraut ha scritto: > Package: ggz-utils > Version: 0.0.13-2 > Severity: normal > > This package suggests the package "ggz-server", but there is no (binary) > package by that name. Which of the several packages produced by the > source package ggz-server is meant? Ouch. It should be suggesting 'ggzd' because this is usually installed when the metaserver (and to some extent also ggz-cmd) are used. Josef -- The GGZ Gaming Zone - http://www.ggzgamingzone.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385824: package build-depends on g++-4.0, which is not available on hppa
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Matthias Klose wrote: > Package: synfig > Version: 0.61.05-7 > Severity: serious > > the package build-depends on g++-3.4 or g++-4.0, which is not > available on hppa. Please build using g++-4.1. > > If the package cannot be built using g++-4.1, please make sure that a > bug report is filed against the g++-4.1 package. This was a temporal workaround. The next upload will solve it. > > > ___ > pkg-synfig-devel mailing list > [EMAIL PROTECTED] > http://lists.alioth.debian.org/mailman/listinfo/pkg-synfig-devel > -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (GNU/Linux) iD8DBQFE/Ac5NTNQylgICMQRAoumAKCo06tIbsVCzm4rsXOIaVn7e12+eQCffz8J O9fPG1x95GoH35tAK7ftWXY= =IEvs -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385964: O: bchunk -- CD image format conversion from bin/cue to iso/cdr
Package: wnpp Severity: normal I intend to orphan the bchunk package. The package description is: The bchunk package contains a UNIX/C rewrite of the BinChunker program. BinChunker converts a CD image in a .bin/.cue format (sometimes .raw/.cue) into a set of .iso and .cdr/.wav tracks. The .bin/.cue format is used by some non-UNIX CD-writing software, but is not supported on most other CD-writing programs. signature.asc Description: Digital signature
Bug#356204: still serious problem with it-mods
There seems to be some serious bug, it makes the mod file unplayable. Maybe something for upstream?
Bug#385965: O: xmms-liveice
Package: wnpp Severity: normal I am orphaning this package, some kind maintainer please pick it up someday. signature.asc Description: Digital signature
Bug#385963: O: shx
Package: wnpp Severity: normal I am orphaning this package, some kind maintainer please pick it up someday. signature.asc Description: Digital signature
Bug#21400: this bug is obsolete
[runs dselect, chooses "access method" -> "disk", no "Distribution top level"] --- Enter _main_ binary dir. [] ? /var/cache/apt-build/repository Using `/var/cache/apt-build/repository' as main binary dir. Using `/var/cache/apt-build/repository/Packages.gz' for main. --- I am using Unstable (1.13.22), but the exact same code exists in Stable (1.10.28). See: src/dpkg-1.10.28/methods/disk.setup and src/dpkg-1.13.22/dselect/methods/disk. It looks like this 8+ year old bug was fixed without trying at some point and should be closed. - Bruce -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#384233: More information needed...
severity 384233 important thanks -- Hi! Please, could you tell us more about this bug? In particular, I don't see when and how this file was generated. Up to my knowledge, none of the automatic install from upstream nor our upgrade script should create such file at this place. Hence, also setting this bug as important since it is not confirmed. It should be bumped to grave if it was to be confirmed. Romain -- son, daddy left you were from you were four I've got to struggle 'cos I am poor she said, food is a very hard thing to find sometime I feel like I'm going out of my mind -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385932: [Pkg-xfce-devel] Bug#385932: xfwm4: adjust composite instead of shade if enabled
Sun, 03 Sep 2006 20:06:04 -0700 - redomen <[EMAIL PROTECTED]>
wrote :
> Package: xfwm4
> Version: 4.3.90.2-2
> Severity: wishlist
>
>
> I'd really love it if you could use the mousewheel on a window title
> bar to adjust the transparency value of the window (when composite is
> enabled) instead of the shader that hides it completely.
>
Hold the ALT key and then scroll ;-) It works also with a horizontal
mouse-wheel.
Mike
--
http://massonnet.org/ Mike Massonnet (mmassonnet) ,-.
, ( {o\
GnuPG 0--" 0xF8C80F97 {`"=,___) (`~
C4DA 431D 52F9 F930 3E5B 3E3D 546C 89D9 F8C8 0F97 \ ,_.- )
signature.asc
Description: PGP signature
Bug#383945: Debian package and license issues
Hi Markus, We have an issue[1] with the license you choose for the media materials: == Prohibition on advertising. All advertising and promotional uses are excluded from the above rights, except for advertisement and promotion of the Derivative Work(s) that You are creating from the Work and Yourself as the author thereof. == This section of Sampling Plus 1.0 license doesn't respect the Debian Social Contract[2] and so we can't upload the package in Debian. I suggest you to use the GPL for the whole package to fix this. [1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=383945 [2] http://www.debian.org/social_contract Regards, Gonéri Le Bouder -- Jabber: [EMAIL PROTECTED]
Bug#326922: raidutils: ftbfs [sparc] struct _I2O_MESSAGE_FRAME' has no member named 'InitiatorAddress'
Oops sorry: my mistake, I missed the SPARC build error. Will integrate & upload your patch immediately. THANKS! --Barak. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#326922: raidutils: ftbfs [sparc] struct _I2O_MESSAGE_FRAME' has no member named 'InitiatorAddress'
Turns out this issue was resolved a month ago, and the new upstream version migrated which resolved the issue migrated to testing about two weeks ago. For that reason I'm going to close this bug; actually I thought I already had. Please do let me know if you have any trouble with the current version though. Thanks, --Barak. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385966: xprint: Seg-fault when printing from firefox
Package: xprint
Version: 1:1.0.2-1
Severity: grave
The amd64 version of xprint don't work any more. It seg-faults every
time I try to print from firefox, and also leads to a firefox
crash. xphelloworld also leads to seg-fault, with similar strace.
Firefox (and mozilla) is the only major application using xprint,
motivating the high severity.
At least pre-xorg 7.0 versions of xprint worked fine under
amd64. Also, the 32-bit x86 version is still working, but with ugly
results.
strace from Xprt when xphelloworld is executed is attached.
/ Anders
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable'), (51,
'testing-proposed-updates'), (50, 'unstable'), (40, 'experimental')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17.11
Locale: LANG=C, LC_CTYPE=C (charmap=ISO-8859-1) (ignored: LC_ALL set to sv_SE)
Versions of packages xprint depends on:
ii libc62.3.6.ds1-4 GNU C Library: Shared libraries
ii libfreetype6 2.2.1-2 FreeType 2 font engine, shared lib
ii libx11-6 2:1.0.0-8 X11 client-side library
ii libxau6 1:1.0.0-4 X11 authorisation library
ii libxdmcp61:1.0.0-4 X11 Display Manager Control Protoc
ii libxfont11:1.2.0-2 X11 font rasterisation library
ii xprint-common1:1.0.2-1 Xprint - the X11 print system (con
ii zlib1g 1:1.2.3-13 compression library - runtime
Versions of packages xprint recommends:
ii xprint-utils 7.0.0+cvs20040414-5 utilities for Xprint, the X11 prin
-- no debconf information
select(256, [0], NULL, NULL, NULL) = 1 (in [0])
accept(0, {sa_family=AF_FILE, path="§bÿ"}, [59071846317817858]) = 1
fcntl(1, F_GETFL) = 0x2 (flags O_RDWR)
fcntl(1, F_SETFL, O_RDWR|O_NONBLOCK)= 0
select(256, [0 1], NULL, NULL, NULL)= 1 (in [1])
read(1, "l\0\v\0\0\0\0\0\0\0\0\0", 4092) = 12
open("/etc/localtime", O_RDONLY)= 3
fstat(3, {st_mode=S_IFREG|0644, st_size=675, ...}) = 0
fstat(3, {st_mode=S_IFREG|0644, st_size=675, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x2afe492ef000
read(3, "TZif\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\4\0\0\0\4\0"..., 4096) = 675
close(3)= 0
munmap(0x2afe492ef000, 4096)= 0
write(2, "AUDIT: Mon Sep 4 13:49:46 2006:"..., 80) = 80
writev(1, [{"\1\0\v\0\0\0s\0\200\35,\4\0\0 \0\377\377\37\0\0\1\0\0\24"...,
468}], 1) = 468
select(256, [0 1], NULL, NULL, NULL)= 1 (in [1])
read(1, "7\0\6\0\0\0 \0005\0\0\0\f\0\0\0\1\0\0\0\0\0\0\0b\0\5\0"..., 4096) = 68
writev(1, [{"\1\20\2\0\0\0\0\0\1\203\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 64}],
1) = 64
select(256, [0 1], NULL, NULL, NULL)= 1 (in [1])
read(1, "\203\0\1\0", 4096) = 4
writev(1, [{"\1\20\4\0\0\0\0\0\377\377\177\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 32}],
1) = 32
select(256, [0 1], NULL, NULL, NULL)= 1 (in [1])
read(1, "b\0\5\0\t\0 \0XKEYBOARD\0\0\0", 4096) = 20
writev(1, [{"\1\20\5\0\0\0\0\0\0\0>\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 32}],
1) = 32
select(256, [0 1], NULL, NULL, NULL)= 1 (in [1])
read(1, "b\0\5\0\v\0 \0XpExtension\0", 4096) = 20
writev(1, [{"\1\20\6\0\0\0\0\0\1\212D\206\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 32}],
1) = 32
select(256, [0 1], NULL, NULL, NULL)= 1 (in [1])
read(1, "\212\0\1\0", 4096) = 4
writev(1, [{"\1\20\7\0\0\0\0\0\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 32}],
1) = 32
select(256, [0 1], NULL, NULL, NULL)= 1 (in [1])
read(1, "\212\1\f\0\36\0\0\0\1\0\0\0xp_ps_spooldir_HOME_"..., 4096) = 48
writev(1, [{"\1r\10\0\25\0\0\0\1\0\0\0\376*\0\0/[EMAIL PROTECTED]"..., 116}],
1) = 116
select(256, [0 1], NULL, NULL, NULL)= 1 (in [1])
read(1, "<\1\2\0\0\0 \0+\0\1\0", 4096) = 12
writev(1, [{"\1\0\n\0\0\0\0\0\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 32}],
1) = 32
select(256, [0 1], NULL, NULL, NULL)= 2 (in [0 1])
read(1, "", 4096) = 0
shutdown(1, 2 /* send and receive */) = 0
close(1)= 0
write(2, "AUDIT: Mon Sep 4 13:49:46 2006:"..., 67) = 67
accept(0, {sa_family=AF_FILE, path="ient 1 disconnected
"}, [59071846317817858]) = 1
fcntl(1, F_GETFL) = 0x2 (flags O_RDWR)
fcntl(1, F_SETFL, O_RDWR|O_NONBLOCK)= 0
select(256, [0 1], NULL, NULL, NULL)= 1 (in [1])
read(1, "l\0\v\0\0\0\0\0\0\0\0\0", 4092) = 12
write(2, "AUDIT: Mon Sep 4 13:49:46 2006:"..., 80) = 80
writev(1, [{"\1\0\v\0\0\0s\0\200\35,\4\0\0 \0\377\377\37\0\0\1\0\0\24"...,
468}], 1) = 468
select(256, [0 1], NULL, NULL, NULL)= 1 (in [1])
read(1, "7\0\6\0\0\0 \0005\0\0\0\f\0\0\0\1\0\0\0\0\0\0\0b\0\5\0"..., 4096) = 68
writev(1, [{"\1\20\2\0\0\0\0\0\1\203\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 64}],
1) = 64
select(256, [0 1], NULL, NULL, NULL)= 1 (in [1])
read(1, "\203\0\1\0", 4096) = 4
writev(1,
Bug#385840: package build-depends on g++-3.4, which is not available on hppa
> Package: vdrift > Version: 0.0.2006.02.21-1 > Severity: normal > > the package build-depends on g++-3.4 or g++-4.0, which is not > available on hppa. Please build using g++-4.1. > > If the package cannot be built using g++-4.1, please make sure that a > bug report is filed against the g++-4.1 package. Vdrift have misterious bug with its internal engine and gcc > 4. The build success on ix86 but the game is buggy after. There is another problem with some ASM intruction that are not portable currently. http://vdrift.net/Forum/viewtopic.php?t=289 Thus Vdrift architecture is set to amd64 arm i386 ia64 powerpc. Not hppa. Regards, -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#272079: initrd-tools: Oh why has not this bug been fixed???
On Mon, Sep 04, 2006 at 10:57:24AM +0200, maximilian attems wrote: > On Mon, Sep 04, 2006 at 12:50:50AM -0700, Jesse Molina wrote: > > Package: initrd-tools > > Version: 0.1.84.1 > > Followup-For: Bug #272079 > > > > > > Here I am, six months later, having the same bug when a fix is clearly > > available but the maintainers don't want to implement it. > > no qualified for a stable update afais. > > > My situation is completely legit. I have LVM compiled in but need an > > initrd for a SATA card, and mkinitrd freaks out because of incorrect > > sanity checking. > > > > Please, please, someone on the kernel team, apply the patch to fix > > this thing so that I don't have to patch my mkinitrd every dang time I > > want to compile a new kernel. > > mkinitrd is no longer supported, > initramfs-tools is the default successor you'll find it on backports.org > see also http://wiki.debian.org/InitrdReplacementOptions > > best regards Notice that Jesse is running a 2.4 kernel, so none of those will do him any good. Jesse, i think it is strongly recomended you upgrade toa 2.6 kernel, using one of those methods. Friendly, Sven Luther -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
