Re: Stus-List Glue residue

[schiller via CnC-List]

Acetone.

I tried all the suggestions of Mineral Spirits, Paint Thinner, Goof-Off, 
etc. to get labels off wine bottles.  None of them worked.  Acetone took 
it off and left a nice clean surface.  I miss the old days of 1-1-1 
Trico and Freon.


Neil Schiller
1983 C&C 35-3, #028, "Grace"
Whitehall, Michigan
WLYC

On 11/29/2018 1:38 AM, Paul Baker via CnC-List wrote:

Rubbing alcohol is very effective in many cases too.


*From:* CnC-List  on behalf of Dennis 
C. via CnC-List 

*Sent:* November 28, 2018 4:54 PM
*To:* CnClist
*Cc:* Dennis C.
*Subject:* Re: Stus-List Glue residue
Most decal adhesives can be removed with mineral spirits.

Dennis C.

On Wed, Nov 28, 2018, 1:12 PM Charlie Nelson via CnC-List 
mailto:cnc-list@cnc-list.com> wrote:


Hey all;
I finally managed to remove the 2018 CRW bow stickers from my
boat--talk about delaying things!
Anyhow, I am now left with the residue of the glue on my Awlgrip
painted hull.
Goo-gone did nothing to help remove them or the glue residue.
I am thinking I need a petroleum based product but am hesitant to
just go for it because of the Awlgrip.
OTOH, I am hesitant to use a scotch-brite pad, etc. for fear of
scratching the Awlgrip.
Suggestions welcome.
Thanks,
Charlie Nelson
Water Phantom
1995 C&C XL/kcb
cenel...@aol.com 
___

Thanks everyone for supporting this list with your contributions. 
Each and every one is greatly appreciated. If you want to support
the list - use PayPal to send contribution --
https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Water Storage on 35-II & Drill Bit Set question

[dwight veinot via CnC-List]

I have no such water issues on my 35 mkii Alianna hull no 242. It was
rather difficult to get myself back to where i needed to get to adjust
tension on my sterring cables. I cut away a small portion of the aft frame
port side with a keyhole saw and was able to squeeze myself back with tools
and light in hand to work on the quadrant including installing new grease
cups, the rudder angle sensor for my Raymarine autopilot and to replace a
broken axle on one of the sheaves, the original that i broke while in
reverse by losing control of the wheel was like a shear pin and tensioning
and lubricating the cable. I was able to install my swim ladder by removing
the access port on the deck just forward of the taffrail. That was about 10
years ago and the hull is still stronger than any bendy toy. My aft jack
stands contact where that bit of frame was removed. No issue. I am not sure
i like the idea of a cut out in the cockpit behind the steering post but i
have seen one on a friends 35mkii and i did consider it so i look forward
to seeing what Eric did on Cat’s Paw

On Wed, Nov 28, 2018 at 4:30 PM Eric Frank via CnC-List <
cnc-list@cnc-list.com> wrote:

> Several folks on the list seem to be interested in seeing the access panel
> I installed in the rear of Cat’s Paw's cockpit.  I’ll be at the boat Sunday
> or Monday and will take pictures of the installation, so I can post them in
> the Public folder of my Dropbox.  I’ll post the URL of that folder when I
> post the pictures (not knowing how to post them properly like most of our
> list serve obviously know!).
>
> Eric Frank
> Cat's Paw
> C&C 35 Mk II
> Mattapoisett, MA
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> --
Sent from Gmail Mobile
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Glue residue

[Chuck Gilchrest via CnC-List]

Spray can electrical contact cleaner or brake cleaner are both high flash
point solvents that will remove the goop.  Not sure how aggressive they'll
be on an Awlgrip paint finish though.  I'd try using it on a hidden sample
area before I sprayed liberally on the area where the stickers used to be.
Make sure to wear gloves though as both are nasty chemicals that include
toluene.

Chuck Gilchrest

S/V Half Magic

1983 35 Landfall

Padanaram, MA

 

 

Sent: Thursday, November 29, 2018 7:27 AM
To: cnc-list@cnc-list.com
Cc: schiller 
Subject: Re: Stus-List Glue residue

 

Acetone.  

I tried all the suggestions of Mineral Spirits, Paint Thinner, Goof-Off,
etc. to get labels off wine bottles.  None of them worked.  Acetone took it
off and left a nice clean surface.  I miss the old days of 1-1-1 Trico and
Freon.

Neil Schiller
1983 C&C 35-3, #028, "Grace"
Whitehall, Michigan
WLYC

On 11/29/2018 1:38 AM, Paul Baker via CnC-List wrote:

Rubbing alcohol is very effective in many cases too.

 

  _  

From: CnC-List  
 on behalf of Dennis C. via CnC-List
 
Sent: November 28, 2018 4:54 PM
To: CnClist
Cc: Dennis C.
Subject: Re: Stus-List Glue residue 

 

Most decal adhesives can be removed with mineral spirits. 

 

Dennis C.

 

On Wed, Nov 28, 2018, 1:12 PM Charlie Nelson via CnC-List
mailto:cnc-list@cnc-list.com>  wrote:

 

Hey all;

 

I finally managed to remove the 2018 CRW bow stickers from my boat--talk
about delaying things!

 

Anyhow, I am now left with the residue of the glue on my Awlgrip painted
hull.

 

Goo-gone did nothing to help remove them or the glue residue. 

 

I am thinking I need a petroleum based product but am hesitant to just go
for it because of the Awlgrip.

 

OTOH, I am hesitant to use a scotch-brite pad, etc. for fear of scratching
the Awlgrip.

 

Suggestions welcome.

 

Thanks,

 

Charlie Nelson

Water Phantom

1995 C&C XL/kcb

 

 

cenel...@aol.com  

___

Thanks everyone for supporting this list with your contributions.  Each and
every one is greatly appreciated.  If you want to support the list - use
PayPal to send contribution --   https://www.paypal.me/stumurray





___
 
Thanks everyone for supporting this list with your contributions.  Each and
every one is greatly appreciated.  If you want to support the list - use
PayPal to send contribution --   https://www.paypal.me/stumurray
 

 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Glue residue

[Rod Stright via CnC-List]

Acetone usually works well

Sent from my iPhone

> On Nov 29, 2018, at 8:49 AM, Chuck Gilchrest via CnC-List 
>  wrote:
> 
> Spray can electrical contact cleaner or brake cleaner are both high flash 
> point solvents that will remove the goop.  Not sure how aggressive they’ll be 
> on an Awlgrip paint finish though.  I’d try using it on a hidden sample area 
> before I sprayed liberally on the area where the stickers used to be.  Make 
> sure to wear gloves though as both are nasty chemicals that include toluene.
> Chuck Gilchrest
> S/V Half Magic
> 1983 35 Landfall
> Padanaram, MA
>  
>  
> Sent: Thursday, November 29, 2018 7:27 AM
> To: cnc-list@cnc-list.com
> Cc: schiller 
> Subject: Re: Stus-List Glue residue
>  
> Acetone.  
> 
> I tried all the suggestions of Mineral Spirits, Paint Thinner, Goof-Off, etc. 
> to get labels off wine bottles.  None of them worked.  Acetone took it off 
> and left a nice clean surface.  I miss the old days of 1-1-1 Trico and Freon.
> 
> Neil Schiller
> 1983 C&C 35-3, #028, "Grace"
> Whitehall, Michigan
> WLYC
> 
> On 11/29/2018 1:38 AM, Paul Baker via CnC-List wrote:
> Rubbing alcohol is very effective in many cases too.
>  
> From: CnC-List  on behalf of Dennis C. via 
> CnC-List 
> Sent: November 28, 2018 4:54 PM
> To: CnClist
> Cc: Dennis C.
> Subject: Re: Stus-List Glue residue
>  
> Most decal adhesives can be removed with mineral spirits.
>  
> Dennis C.
>  
> On Wed, Nov 28, 2018, 1:12 PM Charlie Nelson via CnC-List 
>   
> Hey all;
>  
> I finally managed to remove the 2018 CRW bow stickers from my boat--talk 
> about delaying things!
>  
> Anyhow, I am now left with the residue of the glue on my Awlgrip painted hull.
>  
> Goo-gone did nothing to help remove them or the glue residue.
>  
> I am thinking I need a petroleum based product but am hesitant to just go for 
> it because of the Awlgrip.
>  
> OTOH, I am hesitant to use a scotch-brite pad, etc. for fear of scratching 
> the Awlgrip.
>  
> Suggestions welcome.
>  
> Thanks,
>  
> Charlie Nelson
> Water Phantom
> 1995 C&C XL/kcb
>  
>  
> cenel...@aol.com
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
> 
> 
> ___
>  
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
>  
>  
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Glue residue

[Matthew L. Wolford via CnC-List]

I usually remove glue residue from State registration stickers with repeated 
applications of rubbing alcohol and a little elbow grease.  The alcohol does 
not appear to work at first, but the residue eventually softens and comes off.  
I have not had a problem with paint or gel coat using this method.

From: Charlie Nelson via CnC-List 
Sent: Wednesday, November 28, 2018 2:11 PM
To: cnc-list@cnc-list.com 
Cc: cenel...@aol.com 
Subject: Stus-List Glue residue


Hey all;

I finally managed to remove the 2018 CRW bow stickers from my boat--talk about 
delaying things!

Anyhow, I am now left with the residue of the glue on my Awlgrip painted hull.

Goo-gone did nothing to help remove them or the glue residue. 

I am thinking I need a petroleum based product but am hesitant to just go for 
it because of the Awlgrip.

OTOH, I am hesitant to use a scotch-brite pad, etc. for fear of scratching the 
Awlgrip.

Suggestions welcome.

Thanks,

Charlie Nelson
Water Phantom
1995 C&C XL/kcb


cenel...@aol.com




___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Close Hauled Indicator

[Jeremy Ralph via CnC-List]

What the heck is a “Close Hauled Indicator?”

I peeled away the stickers off the fuse panel and the original panel
inscription has a fuse for a “Close Hauled Indicator.”

Cheers,
  Jeremy
  1978 C&C34-1 #41
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Glue residue

[dwight veinot via CnC-List]

Yes to acetone and it evaporates so quickly that it wont have time to
damage awlgrip. I have used it with pleasant success

On Thu, Nov 29, 2018 at 11:09 AM Matthew L. Wolford via CnC-List <
cnc-list@cnc-list.com> wrote:

> I usually remove glue residue from State registration stickers with
> repeated applications of rubbing alcohol and a little elbow grease.  The
> alcohol does not appear to work at first, but the residue eventually
> softens and comes off.  I have not had a problem with paint or gel coat
> using this method.
>
> *From:* Charlie Nelson via CnC-List 
> *Sent:* Wednesday, November 28, 2018 2:11 PM
> *To:* cnc-list@cnc-list.com
> *Cc:* cenel...@aol.com
> *Subject:* Stus-List Glue residue
>
>
> Hey all;
>
> I finally managed to remove the 2018 CRW bow stickers from my boat--talk
> about delaying things!
>
> Anyhow, I am now left with the residue of the glue on my Awlgrip painted
> hull.
>
> Goo-gone did nothing to help remove them or the glue residue.
>
> I am thinking I need a petroleum based product but am hesitant to just go
> for it because of the Awlgrip.
>
> OTOH, I am hesitant to use a scotch-brite pad, etc. for fear of scratching
> the Awlgrip.
>
> Suggestions welcome.
>
> Thanks,
>
> Charlie Nelson
> Water Phantom
> 1995 C&C XL/kcb
>
>
> cenel...@aol.com
>
> --
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> --
Sent from Gmail Mobile
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Close Hauled Indicator

[David via CnC-List]

Separate instrument in which it shows a view of 45 degree (in lieu of 360 
degrees) either side of top  dead center so your reference upwind is expanded 
and more precise.


David F. Risch, J. D.

Gulf Stream Associates, LLC

(401) 419-4650


From: CnC-List  on behalf of Jeremy Ralph via 
CnC-List 
Sent: Thursday, November 29, 2018 12:10 PM
To: cnc-list@cnc-list.com
Cc: Jeremy Ralph
Subject: Stus-List Close Hauled Indicator

What the heck is a “Close Hauled Indicator?”

I peeled away the stickers off the fuse panel and the original panel 
inscription has a fuse for a “Close Hauled Indicator.”

Cheers,
  Jeremy
  1978 C&C34-1 #41
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Close Hauled Indicator

[dwight veinot via CnC-List]

Angle of travel to the apparent wind. A closed hauled course on your boat
would probably be somewhere between 30 and 40 degrees to apparent wind
direction. With a 135 headsail and full main in 15 kts apparent wind
strength Alliana does best at around 33 degrees to apparent on a beat. Is
that old gear you have

On Thu, Nov 29, 2018 at 1:11 PM Jeremy Ralph via CnC-List <
cnc-list@cnc-list.com> wrote:

> What the heck is a “Close Hauled Indicator?”
>
> I peeled away the stickers off the fuse panel and the original panel
> inscription has a fuse for a “Close Hauled Indicator.”
>
> Cheers,
>   Jeremy
>   1978 C&C34-1 #41
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> --
Sent from Gmail Mobile
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Close Hauled Indicator

[Neil Gallagher via CnC-List]

Jeremy,

Some wind indicator systems have a separate direction gauge which show 
an enlarged scale for wind angles from 0 (ahead) to, say, 60 deg for use 
when going to windward.


Neil Gallagher
Weatherly, 35-1
Glen Cove, NY

On 11/29/2018 12:10 PM, Jeremy Ralph via CnC-List wrote:

What the heck is a “Close Hauled Indicator?”

I peeled away the stickers off the fuse panel and the original panel 
inscription has a fuse for a “Close Hauled Indicator.”


Cheers,
  Jeremy
  1978 C&C34-1 #41


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Glue residue

[Ronald B. Frerker via CnC-List]

 Don't you just put the new stickers over the old spot?RonWild CheriC&C 30-1STL

   
  Hey all; I finally managed to remove the 2018 CRW bow stickers from my 
boat--talk about delaying things! Anyhow, I am now left with the residue of the 
glue on my Awlgrip painted hull. Goo-gone did nothing to help remove them or 
the glue residue.  I am thinking I need a petroleum based product but am 
hesitant to just go for it because of the Awlgrip. OTOH, I am hesitant to use a 
scotch-brite pad, etc. for fear of scratching the Awlgrip. 
  ___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Glue residue

[Charlie Nelson via CnC-List]

True but these were large Charleston Race Week stickers (2018) and that was 
held back in April!!


Of course it may have been easier if I had not procrastinated 7+ months in 
tending to their removal!!


Charlie
Water Phantom
C&C 36 XL/kcb










cenel...@aol.com




-Original Message-
From: Ronald B. Frerker via CnC-List 
To: cnc-list 
Cc: Ronald B. Frerker 
Sent: Thu, Nov 29, 2018 12:52 pm
Subject: Re: Stus-List Glue residue





Don't you just put the new stickers over the old spot?
Ron
Wild Cheri
C&C 30-1
STL













 


 
Hey all;
 
I finally managed to remove the 2018 CRW bow stickers from my boat--talk about 
delaying things!
 
Anyhow, I am now left with the residue of the glue on my Awlgrip painted hull.
 
Goo-gone did nothing to help remove them or the glue residue. 
 
I am thinking I need a petroleum based product but am hesitant to just go for 
it because of the Awlgrip.
 
OTOH, I am hesitant to use a scotch-brite pad, etc. for fear of scratching the 
Awlgrip.
 








___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List [EXTERNAL] Re: Close Hauled Indicator

[Della Barba, Joe via CnC-List]

http://www.boatersland.com/images/img/raymarine-i50-close-hauled-wind-display.jpg



From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Neil 
Gallagher via CnC-List
Sent: Thursday, November 29, 2018 12:32 PM
To: Jeremy Ralph via CnC-List
Cc: Neil Gallagher
Subject: [EXTERNAL] Re: Stus-List Close Hauled Indicator

Jeremy,

Some wind indicator systems have a separate direction gauge which show an 
enlarged scale for wind angles from 0 (ahead) to, say, 60 deg for use when 
going to windward.

Neil Gallagher
Weatherly, 35-1
Glen Cove, NY
On 11/29/2018 12:10 PM, Jeremy Ralph via CnC-List wrote:
What the heck is a “Close Hauled Indicator?”

I peeled away the stickers off the fuse panel and the original panel 
inscription has a fuse for a “Close Hauled Indicator.”

Cheers,
  Jeremy
  1978 C&C34-1 #41




___



Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Close Hauled Indicator

[dwight veinot via CnC-List]

My raymarine instruments show large digits i use an added graphic display
split screen to show apparent wind angle and apparent wind speed

On Thu, Nov 29, 2018 at 1:32 PM Neil Gallagher via CnC-List <
cnc-list@cnc-list.com> wrote:

> Jeremy,
>
> Some wind indicator systems have a separate direction gauge which show an
> enlarged scale for wind angles from 0 (ahead) to, say, 60 deg for use when
> going to windward.
>
> Neil Gallagher
> Weatherly, 35-1
> Glen Cove, NY
>
>
> On 11/29/2018 12:10 PM, Jeremy Ralph via CnC-List wrote:
>
> What the heck is a “Close Hauled Indicator?”
>
> I peeled away the stickers off the fuse panel and the original panel
> inscription has a fuse for a “Close Hauled Indicator.”
>
> Cheers,
>   Jeremy
>   1978 C&C34-1 #41
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> --
Sent from Gmail Mobile
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Close Hauled Indicator

[Jeremy Ralph via CnC-List]

Got it, good to learn something new. Thanks David and others for your
replies.

Jeremy



-- Forwarded message --
From: David 
To: "cnc-list@cnc-list.com" 
Cc:
Bcc:
Date: Thu, 29 Nov 2018 17:24:58 +
Subject: Re: Stus-List Close Hauled Indicator
Separate instrument in which it shows a view of 45 degree (in lieu of 360
degrees) either side of top  dead center so your reference upwind is
expanded and more precise.

*David F. Risch, J. D.*

*Gulf Stream Associates, LLC*


*(401) 419-4650 <(401)%20419-4650> *

--
*From:* CnC-List  on behalf of Jeremy Ralph
via CnC-List 
*Sent:* Thursday, November 29, 2018 12:10 PM
*To:* cnc-list@cnc-list.com
*Cc:* Jeremy Ralph
*Subject:* Stus-List Close Hauled Indicator

What the heck is a “Close Hauled Indicator?”

I peeled away the stickers off the fuse panel and the original panel
inscription has a fuse for a “Close Hauled Indicator.”

Cheers,
  Jeremy
  1978 C&C34-1 #41
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Glue residue

[John Conklin via CnC-List]

They looked cool Charlie watched them go by :) on the course and passed them 
going to my home up Whittaker creek many times at the sail-craft dock :)

John Conklin
S/V Halcyon

On Nov 29, 2018, at 2:45 PM, Charlie Nelson via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

True but these were large Charleston Race Week stickers (2018) and that was 
held back in April!!

Of course it may have been easier if I had not procrastinated 7+ months in 
tending to their removal!!

Charlie
Water Phantom
C&C 36 XL/kcb





cenel...@aol.com


-Original Message-
From: Ronald B. Frerker via CnC-List 
mailto:cnc-list@cnc-list.com>>
To: cnc-list mailto:cnc-list@cnc-list.com>>
Cc: Ronald B. Frerker mailto:rbfrer...@yahoo.com>>
Sent: Thu, Nov 29, 2018 12:52 pm
Subject: Re: Stus-List Glue residue

Don't you just put the new stickers over the old spot?
Ron
Wild Cheri
C&C 30-1
STL





Hey all;

I finally managed to remove the 2018 CRW bow stickers from my boat--talk about 
delaying things!

Anyhow, I am now left with the residue of the glue on my Awlgrip painted hull.

Goo-gone did nothing to help remove them or the glue residue.

I am thinking I need a petroleum based product but am hesitant to just go for 
it because of the Awlgrip.

OTOH, I am hesitant to use a scotch-brite pad, etc. for fear of scratching the 
Awlgrip.


___

Thanks everyone for supporting this list with your contributions. Each and 
every one is greatly appreciated. If you want to support the list - use PayPal 
to send contribution -- 
https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=02%7C01%7C%7Cdb3dc4909d184e958c2608d65633621a%7C84df9e7fe9f640afb435%7C1%7C0%7C636791176015574222&sdata=mFpoEvS5LArp1tfWOoI7s5ZA2S96MbUlmZtH4Uz3RIM%3D&reserved=0

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Prop Shaft Strut - Removal, Alignment, and Re-bedding - C&C 36-1 KCB

[Tim Rutherford via CnC-List]

Neil, Matt, Dennis, and Len - thanks for your comments. Really appreciated!

--
Tim Rutherford

C&C 36-1 KCB #244 - Chamamé
Tampa, FL
tim.rutherford.m...@gmail.com



On Wed, Nov 28, 2018 at 7:53 PM Dennis C. via CnC-List <
cnc-list@cnc-list.com> wrote:

> Couple years ago, I removed Touche's strut to straighten it.  It was a
> straightforward job.  I did have to remove the fuel tank for access to the
> nuts.
>
> Upon re-install, I used a cone shaped grinding stone to chamfer the 4
> fastener holes on the underside.  This lets the sealant form an o-ring
> around the fastener.  I think I used 3M 4200 as the sealant.  I recall I
> used new fasteners with fender washer, washer and nylon lock nuts.
>
> The joint around the perimeter of the strut base was faired with AwlFair,
> sanded and painted.
>
> The alignment was pretty true before removal so I just re-installed
> without any further ado.  The lack of vibration after completion indicates
> that the job was successful.  If there had been any vibration, I would have
> done an alignment.
>
> Dennis C.
> Touche' 35-1#83
> Mandevile, LA
>
> On Nov 28, 2018 9:16 AM, "Tim Rutherford via CnC-List" <
> cnc-list@cnc-list.com> wrote:
>
> Prop shaft strut is weeping around the nuts inside the hull and externally
> the fairing shows cracks around the perimeter of the strut base although it
> doesn't feel loose. No slop in the Cutlass bearing. She's on the hard for
> bottom job and driveline maintenance. I'm interested in your thoughts on
> how best to proceed to remedy the strut mount leak and cracks in the
> fairing.
>
> From the few posts I have found here, it seems the struts are aligned and
> bedded onto a hard substrate and that the mounting holes were drilled with
> a close fit. That said, it seems that to remount the strut all that is
> required is to remove the fairing material and then simply remove and
> replace, seal, and re-fair.
>
> My questions are:
> 1.) How best to assess whether comprehensive strut alignment check is
> necessary i.e., laser, scope, yadda-yadda? I'm thinking that if the shaft
> slides easily through the remounted strut and into center of the shaft log
> and seal, and visually appears dead on center through all the above, than I
> can proceed with the engine alignment. If not what, call a pro? I have more
> time than money, so DIY work is preferred.
>
> 2.) How significant is hull flex on these boats while on the hard? I plan
> final engine alignment after launch, but could loading on the yard stands
> cause strut alignment to appear skewed? BTW, I'm working with an
> independent Yanmar mechanic for the engine mounts and alignment.
>
> 2.) What material for fairing and sealing the strut bed? What's the method
> of application?
>
> The prop is a folding Martec two-blade RH17DX10P-3 Eliptec with 4" of
> clearance to the hull; found the center pin broken on one end. It's back at
> Martec for refurb. The motor mounts were DF2205-2 going back with OE Yanmar
> mounts. While under way, the vibration caused the sail locker lid to sound
> like rubber marbles in a blender at a frequency that was probably 2X prop
> speed. It seemed like a lot of vibration but there was no change since I
> purchased the boat in June '17, and after about a hundred hours of
> motoring. Shaft seal is a PYI PSS that is getting a new maintenance kit,
> and of course, the strut a new cutlass bearing.
>
> Please share your thoughts if you have been through this or something
> similar. All help is appreciated.
> --
> Tim Rutherford
> C&C 36-1 KCB #244 - Chamamé
> Tampa, FL
> tim.rutherford.m...@gmail.com
> 813 748 4888 cel/text
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Glue residue

[Ronald B. Frerker via CnC-List]

 Oops.  I was thinking state stickers.RonWild CheriC&C 30-1STL

On Thursday, November 29, 2018, 1:46:42 PM CST, Charlie Nelson via CnC-List 
 wrote:  
 
 True but these were large Charleston Race Week stickers (2018) and that was 
held back in April!!
Of course it may have been easier if I had not procrastinated 7+ months in 
tending to their removal!!
CharlieWater PhantomC&C 36 XL/kcb





cenel...@aol.com


-Original Message-
From: Ronald B. Frerker via CnC-List 
To: cnc-list 
Cc: Ronald B. Frerker 
Sent: Thu, Nov 29, 2018 12:52 pm
Subject: Re: Stus-List Glue residue

 Don't you just put the new stickers over the old spot?RonWild CheriC&C 30-1STL

   
  
  ___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray