Hello,
I'm trying to install OpenBSD arm64 on ROCKPro64 4GB Single Board.
Firstly 6.6 stable and later also snapshot from today.
I firstly followed this post https://github.com/krjdev/rock64_openbsd
to be able boot OpenBSD from SD card.
Things look ok, but during installation, I was not able to write to eMMC
(bought together with board, eMMC includes Android and I was able to
boot to it before stating migration to OpenBSD)
I didn't found a HW jump for RW/RO mode for eMMC.
I noticed different number of disks in different stages.
Red led is on, but i didn't found why. I checked with IRC channel on
PINE64, but no ideas there about RO eMMC and red led on.
Any idea, how to made eMMC writable? My intent is to install OpenBSD to
eMMC and use it from there.
Please _reply to all_ as I'm not subscribed to this list. Thank you for
any ideas and recommendations.
Jiří
$ cu -d -l /dev/cuaU0 -s 150
Connected to /dev/cuaU0 (speed 150)
# dmesg
OpenBSD 6.6 (RAMDISK) #257: Sat Oct 12 19:06:25 MDT 2019
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/RAMDISK
real mem = 4093161472 (3903MB)
avail mem = 3891376128 (3711MB)
mainbus0 at root: Pine64 RockPro64
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.0.5
efi0: Das U-boot rev 0x0
psci0 at mainbus0: PSCI 1.0
agintc0 at mainbus0 sec shift 3:4 nirq 288 nredist 6: "interrupt-controller"
agintcmsi0 at agintc0
syscon0 at mainbus0: "qos"
syscon1 at mainbus0: "qos"
syscon2 at mainbus0: "qos"
syscon3 at mainbus0: "qos"
syscon4 at mainbus0: "qos"
syscon5 at mainbus0: "qos"
syscon6 at mainbus0: "qos"
syscon7 at mainbus0: "qos"
syscon8 at mainbus0: "qos"
syscon9 at mainbus0: "qos"
syscon10 at mainbus0: "qos"
syscon11 at mainbus0: "qos"
syscon12 at mainbus0: "qos"
syscon13 at mainbus0: "qos"
syscon14 at mainbus0: "qos"
syscon15 at mainbus0: "qos"
syscon16 at mainbus0: "qos"
syscon17 at mainbus0: "qos"
syscon18 at mainbus0: "qos"
syscon19 at mainbus0: "qos"
syscon20 at mainbus0: "qos"
syscon21 at mainbus0: "qos"
syscon22 at mainbus0: "qos"
syscon23 at mainbus0: "qos"
syscon24 at mainbus0: "qos"
syscon25 at mainbus0: "power-management"
"power-controller" at syscon25 not configured
syscon26 at mainbus0: "syscon"
"io-domains" at syscon26 not configured
syscon27 at mainbus0: "syscon"
syscon28 at mainbus0: "syscon"
rkclock0 at mainbus0
rkclock1 at mainbus0
syscon29 at mainbus0: "syscon"
"io-domains" at syscon29 not configured
"usb2-phy" at syscon29 not configured
"usb2-phy" at syscon29 not configured
"phy" at syscon29 not configured
rkpinctrl0 at mainbus0: "pinctrl"
rkgpio0 at rkpinctrl0
rkgpio1 at rkpinctrl0
rkgpio2 at rkpinctrl0
rkgpio3 at rkpinctrl0
rkgpio4 at rkpinctrl0
"pmu_a53" at mainbus0 not configured
"pmu_a72" at mainbus0 not configured
agtimer0 at mainbus0: tick rate 24000 KHz
"xin24m" at mainbus0 not configured
simplebus0 at mainbus0: "amba"
"dma-controller" at simplebus0 not configured
"dma-controller" at simplebus0 not configured
dwge0 at mainbus0: address a6:63:b8:9a:57:7c
rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6
sdhc0 at mainbus0
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma
dwmmc0 at mainbus0: 50 MHz base clock
sdmmc1 at dwmmc0: 4-bit, dma
ehci0 at mainbus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
ohci0 at mainbus0: version 1.0
ehci1 at mainbus0
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
ohci1 at mainbus0: version 1.0
"usb" at mainbus0 not configured
"usb" at mainbus0 not configured
"saradc" at mainbus0 not configured
rkiic0 at mainbus0
iic0 at rkiic0
rkiic1 at mainbus0
iic1 at rkiic1
com0 at mainbus0: ns16550, no working fifo
com1 at mainbus0: ns16550, no working fifo
com1: console
"spi" at mainbus0 not configured
"thermal-zones" at mainbus0 not configured
"tsadc" at mainbus0 not configured
rkiic2 at mainbus0
iic2 at rkiic2
"pwm" at mainbus0 not configured
"pwm" at mainbus0 not configured
"dmc" at mainbus0 not configured
"efuse" at mainbus0 not configured
"watchdog" at mainbus0 not configured
"rktimer" at mainbus0 not configured
rkiic3 at mainbus0
iic3 at rkiic3
rkpmic0 at iic3 addr 0x1b: RK808
"backlight" at mainbus0 not configured
"leds" at mainbus0 not configured
"external-gmac-clock" at mainbus0 not configured
"sdio-pwrseq" at mainbus0 not configured
"vcc1v8-s0" at mainbus0 not configured
"dc-12v" at mainbus0 not configured
"vcc-sys" at mainbus0 not configured
"vcc3v3-sys" at mainbus0 not configured
"vcc5v0-host-regulator" at mainbus0 not configured
"vcc5v0-typec0-en" at mainbus0 not configured
"vcc-phy-regulator" at mainbus0 not configured
"vdd-log" at mainbus0 not configured
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00
addr
