Re: Shopping campaigns bid questions

[Amol Sharma]

As per my knowledge, at the moment there is no way to use a default bid.
Every ProductPartition must have a separate bid.

--
Thanks and Regards,
Amol Sharma



On Fri, Jun 27, 2014 at 4:11 AM, John Lister  wrote:

> Hi, I have a couple of questions regarding shopping campaigns while I
> migrate all my code over.
>
> Firstly is it possible to use the group bid as a default as with other
> adgroup criteria or do shopping campaigns always require a bid. The errors
> I get and behaviour of the user interface seem to demonstrate that. Is this
> likely to be changed in the future? If not why are shopping campaigns
> different to all others in this respect?
>
> Secondly and on a similar note, I tried to set the bidding strategy type
> to NONE to force through the defaults from group/campaign as I do with
> other campaign types, but this got rejected, are other bidding strategies
> allowed with shopping campaigns or are we not able to apply a finer grain
> control as with other criteria?
>
> Finally I noticed that when I import a shopping campaign the root patition
> has a status of PAUSED with the others having a status of ACTIVE, but when
> I try to set the user status with the API I get an error, the user
> interface also seems to bear out that this isn't supported? Is it possible
> to pause specific parts of a partition tree or are they always active?
>
> Thanks
>
> John
>
>
>  --
> --
> =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
> Also find us on our blog and Google+:
> https://googleadsdeveloper.blogspot.com/
> https://plus.google.com/+GoogleAdsDevelopers/posts
> =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
>
> You received this message because you are subscribed to the Google
> Groups "AdWords API Forum" group.
> To post to this group, send email to adwords-api@googlegroups.com
> To unsubscribe from this group, send email to
> adwords-api+unsubscr...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/adwords-api?hl=en
> ---
> You received this message because you are subscribed to the Google Groups
> "AdWords API Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to adwords-api+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: OPERATIONS_FOR_TOO_MANY_SHOPPING_ADGROUPS treshold

[Danial Klimkin]

Hello Igor,


Only 2 shopping ad groups can be updated in as single request currently.


-Danial, AdWords API Team.


On Monday, June 30, 2014 10:48:24 AM UTC+4, Igor Schut wrote:
>
> Hi,
>
> We have been updating Product Partitions and just got some 
> "OPERATIONS_FOR_TOO_MANY_SHOPPING_ADGROUPS"- errors.
>
> Whats the number of Shopping Adgroups to update objects for in a single 
> request?
>
> Thanks,
> Igor Schut
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: OPERATIONS_FOR_TOO_MANY_SHOPPING_ADGROUPS treshold

[Igor Schut]

Hi Danial,

Thank you for the swift response. Is this limit states somewhere? Did I 
miss this?

Tanks anyway.
Igor

Op maandag 30 juni 2014 11:12:22 UTC+2 schreef Danial Klimkin:
>
> Hello Igor,
>
>
> Only 2 shopping ad groups can be updated in as single request currently.
>
>
> -Danial, AdWords API Team.
>
>
> On Monday, June 30, 2014 10:48:24 AM UTC+4, Igor Schut wrote:
>>
>> Hi,
>>
>> We have been updating Product Partitions and just got some 
>> "OPERATIONS_FOR_TOO_MANY_SHOPPING_ADGROUPS"- errors.
>>
>> Whats the number of Shopping Adgroups to update objects for in a single 
>> request?
>>
>> Thanks,
>> Igor Schut
>>
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Creating a MCC test account.

[H]

Many thanks Josh, all working as expected now.

Cheers
H

On Thursday, June 26, 2014 5:45:59 PM UTC+1, Josh Radcliff (AdWords API 
Team) wrote:
>
> Hi,
>
> For those of you who want to create a test account, *the creation link 
> should now be working properly*.
>
> https://adwords.google.com/um/StartNewMccAccount?testAccount=true
>
> Please post to this thread if you encounter any problems with test account 
> creation.
>
> H, to your question on your developer token application, you can contact 
> the API Review Team via this form 
> .
>
> Cheers,
> Josh, AdWords API Team
>
> On Wednesday, June 25, 2014 2:19:44 AM UTC-7, H wrote:
>>
>> Hi Josh
>>
>> Sadly that's the problem :-(
>>
>> We used to have an approved developer token from our application back in 
>> 2012, but it was later removed (probably because we stopped work on our app 
>> and so stopped using the API for over well over 12 months).  We now have 
>> time/funds to continue development, we need to build more features to abide 
>> by the changes in RMF, but we can't test anything.
>>
>> I've re-applied for a token, but still waiting for a response from the 
>> team.  (Yes, I've checked spam folder for lost messages, and I've received 
>> no request for follow up information since application, which is probably 
>> almost two weeks ago now)
>>
>> If I give you my MCC customer ID by private message, would you be able to 
>> chase our API token application?  Or can you provide a suggestion as to 
>> what we can do next?
>>
>> Cheers
>> H
>>
>> On Tuesday, June 24, 2014 8:36:36 PM UTC+1, Josh Radcliff (AdWords API 
>> Team) wrote:
>>>
>>> Hi,
>>>
>>> Unfortunately the team is still working on getting it resolved. In the 
>>> meantime, if you have an *approved* developer token you could test your 
>>> code against a non-test account but avoid serving any ads by making sure 
>>> your campaigns are all paused.
>>>
>>> Thanks,
>>> Josh, AdWords API Team
>>>
>>> On Tuesday, June 24, 2014 2:30:08 AM UTC-7, H wrote:

 Any update?

 (Sorry to chase, but we're desperate to get our coding done here!)

 On Wednesday, June 18, 2014 9:42:38 PM UTC+1, Josh Radcliff (AdWords 
 API Team) wrote:
>
> Hi,
>
> We're still working on fixing the test account creation process. I'll 
> update this post as soon as I have more information.
>
> Thanks,
> Josh, AdWords API Team
>
> On Wednesday, June 18, 2014 5:58:31 AM UTC-4, H wrote:
>>
>> I'm having the exact same problem, unable to create a test mcc 
>> account, and instead it creates a non-test adwords account.
>>
>> Any solution to this yet?
>>
>> Cheers
>> H
>>
>>
>> On Wednesday, June 4, 2014 3:41:53 PM UTC+1, Josh Radcliff (AdWords 
>> API Team) wrote:
>>>
>>> Hi,
>>>
>>> Hmmm...the customer ID you supplied is a regular *non-test* AdWords 
>>> account, not an MCC account. I just went through the flow myself and 
>>> found 
>>> that the new account I created also was a regular non-test AdWords 
>>> account. 
>>> I'll follow up on this and post an update as soon as I have more 
>>> information.
>>>
>>> Thanks,
>>> Josh, AdWords API Team
>>>
>>> On Wednesday, June 4, 2014 4:17:12 AM UTC-4, minh...@silverlining.vn 
>>> wrote:

 I have the same problem when trying to create MCC test account 
 using the link 
 https://adwords.google.com/um/StartNewMccAccount?testAccount=true. 
 It's redirect me to a create page and make me verify the account with 
 email, then, after click to the verify link in the email, i still see 
 the 
 adword page with no indicator of test account. I tried quite sometimes 
 but 
 to no avail.

 My customer id:
 Customer ID: 400-582-1814

 Please make a check and help me.

 Thanks.


 Vào 03:20:49 UTC+7 Thứ tư, ngày 22 tháng một năm 2014, Adwords Test 
 đã viết:
>
> Hello, 
>
> Sorry for the delay. So I attempted to create a new test account 
> using the same link, it seems to redirect me to this new page (
> https://accounts.google.com/ServiceLogin?service=adwords&hl=en-US )
>
> and that has no indication of any "test" account being created. 
> This was after I logged out from this current account. Should I go 
> ahead 
> with the account creation process? 
>
> Thanks,
> Toan
>
> On Friday, January 17, 2014 1:54:12 PM UTC-6, Ray Tsang (AdWords 
> API Team) wrote:
>>

Re: Issues with adding production partition in shopping campaign with API

[aroxotest18]

Hi Josh,

The problem Solved, Really Thanks for your full support and effort

Please make this thread as "Closed".

Thanks

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Longer text ads in API

[Артур Геращенко]

Hi!

Can I create text ads in API Google AdWords using longer text ads?
I will clarify: https://support.google.com/adwords/answer/1704441?hl=en

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Longer text ads in API

[Danial Klimkin]

Hello Arthur,


Definitely, as long as you campaigns are targeting eligible countries. 
There is no special flag / checkbox for the API, just send ads as usual.


-Danial, AdWords API Team.

On Monday, June 30, 2014 3:06:45 PM UTC+4, Артур Геращенко wrote:
>
> Hi!
>
> Can I create text ads in API Google AdWords using longer text ads?
> I will clarify: https://support.google.com/adwords/answer/1704441?hl=en
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

ProductPartition - InternalApiError - Github example

[Nam Ngo]

- Client library used: googleads-python-lib

- Example 
used: 
https://github.com/googleads/googleads-python-lib/blob/master/examples/adwords/v201402/shopping/add_product_partition_tree.py

- Exception raised: WebFault: Server raised fault: 
'[InternalApiError.UNEXPECTED_INTERNAL_API_ERROR @ 
com.google.ads.api.services.common.error.InternalApiError.(InternalApiErro]'

- I'm using MCC test account.



-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Created a test account but it didn't work

[adwords-api-test]

Danial,

Thanks for the response. I cancelled the adwords account and tried to 
create a new one. It goes to a page that says "Creating Test Account" that 
doesn't do anything.





On Friday, June 27, 2014 6:49:28 AM UTC-5, Danial Klimkin wrote:
>
> Hello,
>
>
> We had a temporary issue resulting in a normal (non-test) account being 
> created by this form. This issue should be resolved now.
>
> Please try creating a new test MCC account again.
>
>
> -Danial, AdWords API Team.
>
>
> On Friday, June 27, 2014 2:35:57 AM UTC+4, adwords-...@centro.net wrote:
>>
>> I created a test account by visiting here: 
>> https://adwords.google.com/um/StartNewMccAccount?testAccount=true
>>
>> However, when I log into the account, it doesn't have the red bar that 
>> says "This is a test account" so I assume it's not. Is test account 
>> creation broken? Can I convert this account to a test account now?
>>
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: is my account adsword api still review ?

[Fanir]

okie, i will waiting team api approve :D, i will update all thing when get 
approve or next week

thanks you Danial Klimkin :D

On Friday, June 27, 2014 12:13:02 AM UTC+7, Fanir wrote:
>
> i already to signup adsword api, and when i add my master card to bill, 
> system say, sorry you can`t add your card to bill "We apologize for the 
> inconvenience, but we are unable to process your request at this time. Our 
> engineers have been notified of this problem and will work to resolve it."
>
> but when i go to 
> https://adwords.google.com/select/EditBillingPreferences?hl=en_US, i can 
> see my master card already to add success. and status in api is pending 
> review. 
>
> is my account adsword api still review ? am i need to re add again my 
> master card ?
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

INCOMPLETE_SIGNUP - We have done everything we can . . .

[Paul Remote-Keys]

 Dear API Guys

Having a bit of a nightmare, and not getting much joy. . . . 

I have development staff who I need to pay, but at present we cannot 
progress without some resolution from you guys:

We have applied for API Token using production MCC: 400-994-7983

We completed all the paperwork and submitted all requested information.

We currently see the response in the attached file.

We followed this advice:

"t looks like you did not accept Terms & Conditions on your production 
MCC.  Could you go back into Billing --> Billing Preferences and re-enter 
your billing information, and make sure that you click Continue all the way 
through, including past the Terms & Conditions screen?"

We attempted to do this and got the following error message:

"We apologise for the inconvenience, but we are unable to process your 
request at this time. Our engineers have been notified of this problem and 
will work to resolve it. Please note that using your browser's back button 
in AdWords can increase the likelihood of errors. If you think this was the 
cause of your error, please try again without using the back button"

This has been going on for two days now . . . . . . 

Can someone please advise what (if anything) we are doing wrong so we can 
move forward before we get fired!

Thanks

Paul


-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
[Jun 27 2014 16:29:04.00 - ERROR] POST 
/api/adwords/cm/v201402/CampaignService HTTP/1.0
Host: adwords.google.com
Connection: close
User-Agent: PHP-SOAP/5.3.10-1ubuntu3.11, gzip
Accept-Encoding: gzip, deflate
Content-Encoding: gzip
Content-Type: text/xml; charset=utf-8
SOAPAction: ""
Content-Length: 449
Authorization: Bearer 
ya29.MQBnL_ElCzhZcR4AAADSgd8AkPdnrEcnrMrDFFNdEDtnxO9aB9xpH37e1tRtdw


http://schemas.xmlsoap.org/soap/envelope/"; 
xmlns:ns1="https://adwords.google.com/api/adwords/cm/v201402";>
  

  599-157-9136
  39x7nXrI0EQ6KcP2G30C0w
  Car Key Services (AwApi-PHP/5.3.0, Common-PHP/5.3.0, 
PHP/5.3.10-1ubuntu3.11)

  
  

  
Id
Name

  Name
  ASCENDING


  0
  500

  

  


HTTP/1.0 500 Internal Server Error
Content-Type: text/xml; charset=UTF-8
Content-Encoding: gzip
Date: Fri, 27 Jun 2014 15:29:02 GMT
Expires: Fri, 27 Jun 2014 15:29:02 GMT
Cache-Control: private, max-age=0
X-Content-Type-Options: nosniff
X-Frame-Options: SAMEORIGIN
X-XSS-Protection: 1; mode=block
Content-Length: 505
Server: GSE


http://schemas.xmlsoap.org/soap/envelope/";>
  
https://adwords.google.com/api/adwords/cm/v201402";>
  0004fcd2f81b54780aec2aa88e007c41
  CampaignService
  get
  0
  156

  
  

  soap:Server
  [QuotaCheckError.INCOMPLETE_SIGNUP @ ; 
trigger:'']
  
https://adwords.google.com/api/adwords/cm/v201402";>
  [QuotaCheckError.INCOMPLETE_SIGNUP @ ; 
trigger:'']
  ApiException
  http://www.w3.org/2001/XMLSchema-instance"; 
xsi:type="QuotaCheckError">


QuotaCheckError.INCOMPLETE_SIGNUP
QuotaCheckError
INCOMPLETE_SIGNUP
  

  

  

Problem adwords remarketing

[myfitness . es]

Hello guys today I implemented remarketing dynamic, but I have problems with 
the 
tag: I'll tell you regarding products remarketing tag works without problems
, but with regard to the remarketing tag with category or  home giving me 
errors because according to you? 

I tried to analyze other websites and they all use the exact same tags! 

I used to analyze the remarketing tag assistance of google chrome! 

The site in question is this www. myfitness .es 

Could you help me understand why the remarketing works only for products? 

Thanks to all

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

API Access still not resolved

[Paul Remote-Keys]

Guys

I don't know what to do now.

We have jumped through every hoop, signed and agreed to every set of terms 
& conditions. Done everything we have been asked.  Still, the token cannot 
be used in the test MCC (or the production obviously).

Is anyone else having these having these issues and how did you get it 
resolved? I am paying development staff to sit around at present as we can 
move no further forward until we can get connected . . 

Manager ID: 400-994-7983


http://schemas.xmlsoap.org/soap/envelope/";>
  
https://adwords.google.com/api/adwords/cm/v201402";>
  0004fcfd92c68db00aec586dca002f9b
  CampaignService
  get
  0
  545

  
  

  soap:Server
  [QuotaCheckError.INCOMPLETE_SIGNUP @ ; 
trigger:'']
  
https://adwords.google.com/api/adwords/cm/v201402";>
  [QuotaCheckError.INCOMPLETE_SIGNUP @ ; 
trigger:'']
  
ApiException
  http://www.w3.org/2001/XMLSchema-instance"; 
xsi:type="QuotaCheckError">


QuotaCheckError.INCOMPLETE_SIGNUP
QuotaCheckError
INCOMPLETE_SIGNUP
  

  

  


Again, we have followed all correct procedures. We have signed now (two) 
lots of T&Cs and also submitted all paperword, docus, etc . . . 

Any ideas??

Thanks

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: API Token

[Paul Remote-Keys]

Hi Danial

Thank you for your reply/ Before we even received it, all of the steps had 
been taken correctly. We even got another T&C to sign, which we did and 
sent back, but the token is still not accepting due to 'incomplete signup'.

I am really pressed for time on this project as I have number of 
auto-locksmiths in the UK who expected to be live with their advertising by 
now.

Any insight you could give would be great?

Thanks

Paul


http://schemas.xmlsoap.org/soap/envelope/";>
  
https://adwords.google.com/api/adwords/cm/v201402";>
  0004fcfd92c68db00aec586dca002f9b
  CampaignService
  get
  0
  545

  
  

  soap:Server
  [QuotaCheckError.INCOMPLETE_SIGNUP @ ; 
trigger:'']
  
https://adwords.google.com/api/adwords/cm/v201402";>
  [QuotaCheckError.INCOMPLETE_SIGNUP @ ; 
trigger:'']
  
ApiException
  http://www.w3.org/2001/XMLSchema-instance"; 
xsi:type="QuotaCheckError">


QuotaCheckError.INCOMPLETE_SIGNUP
QuotaCheckError
INCOMPLETE_SIGNUP
  

  

  




On Thursday, 26 June 2014 15:01:35 UTC+1, Paul Remote-Keys wrote:
>
> Hi Guys
>
> Customer ID: 400-994-7983
>
> We went through the process of setting up and completing all the 
> documentation for the API Token.  I see the token but it still says pending 
> . . . . 
>
> Any way to find out how long this takes as we are in 'stop' mode until we 
> can get over this.  Got some 45 campaigns to post, with around 50,000 
> keywords - each with their own destination URL . . . .  manual is not an 
> option.
>
> Thanks
>
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Internal server error in CampaignCriterionService

[Keith Miles]

Hello Ray,

I am the account manager of the client which has had this API error since 
13 June.

Could you please give me an update on this issue, and an estimated date on 
deploying a fix?

Let me know if you need anything more from our side.

We are concerned because it is taking a long time to fix.

Many thanks,
Keith


-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Creating a MCC test account.

[Christian Wolf]

Hi,

we are planning to test the AdWords API, but we can't set up the necessary 
MCC Test Account: whenever we use your provided link, the account creation 
wizard will end up in creating a "normal" AdWords account instead of an MCC 
test account. We tried with many different email addresses and both new or 
existing google accounts.

Is it possible to create a production MCC account and "switch" it to a MCC 
test account afterwards?

Best,
Christian


Am Donnerstag, 26. Juni 2014 18:45:59 UTC+2 schrieb Josh Radcliff (AdWords 
API Team):
>
> Hi,
>
> For those of you who want to create a test account, *the creation link 
> should now be working properly*.
>
> https://adwords.google.com/um/StartNewMccAccount?testAccount=true
>
> Please post to this thread if you encounter any problems with test account 
> creation.
>
> H, to your question on your developer token application, you can contact 
> the API Review Team via this form 
> .
>
> Cheers,
> Josh, AdWords API Team
>
> On Wednesday, June 25, 2014 2:19:44 AM UTC-7, H wrote:
>>
>> Hi Josh
>>
>> Sadly that's the problem :-(
>>
>> We used to have an approved developer token from our application back in 
>> 2012, but it was later removed (probably because we stopped work on our app 
>> and so stopped using the API for over well over 12 months).  We now have 
>> time/funds to continue development, we need to build more features to abide 
>> by the changes in RMF, but we can't test anything.
>>
>> I've re-applied for a token, but still waiting for a response from the 
>> team.  (Yes, I've checked spam folder for lost messages, and I've received 
>> no request for follow up information since application, which is probably 
>> almost two weeks ago now)
>>
>> If I give you my MCC customer ID by private message, would you be able to 
>> chase our API token application?  Or can you provide a suggestion as to 
>> what we can do next?
>>
>> Cheers
>> H
>>
>> On Tuesday, June 24, 2014 8:36:36 PM UTC+1, Josh Radcliff (AdWords API 
>> Team) wrote:
>>>
>>> Hi,
>>>
>>> Unfortunately the team is still working on getting it resolved. In the 
>>> meantime, if you have an *approved* developer token you could test your 
>>> code against a non-test account but avoid serving any ads by making sure 
>>> your campaigns are all paused.
>>>
>>> Thanks,
>>> Josh, AdWords API Team
>>>
>>> On Tuesday, June 24, 2014 2:30:08 AM UTC-7, H wrote:

 Any update?

 (Sorry to chase, but we're desperate to get our coding done here!)

 On Wednesday, June 18, 2014 9:42:38 PM UTC+1, Josh Radcliff (AdWords 
 API Team) wrote:
>
> Hi,
>
> We're still working on fixing the test account creation process. I'll 
> update this post as soon as I have more information.
>
> Thanks,
> Josh, AdWords API Team
>
> On Wednesday, June 18, 2014 5:58:31 AM UTC-4, H wrote:
>>
>> I'm having the exact same problem, unable to create a test mcc 
>> account, and instead it creates a non-test adwords account.
>>
>> Any solution to this yet?
>>
>> Cheers
>> H
>>
>>
>> On Wednesday, June 4, 2014 3:41:53 PM UTC+1, Josh Radcliff (AdWords 
>> API Team) wrote:
>>>
>>> Hi,
>>>
>>> Hmmm...the customer ID you supplied is a regular *non-test* AdWords 
>>> account, not an MCC account. I just went through the flow myself and 
>>> found 
>>> that the new account I created also was a regular non-test AdWords 
>>> account. 
>>> I'll follow up on this and post an update as soon as I have more 
>>> information.
>>>
>>> Thanks,
>>> Josh, AdWords API Team
>>>
>>> On Wednesday, June 4, 2014 4:17:12 AM UTC-4, minh...@silverlining.vn 
>>> wrote:

 I have the same problem when trying to create MCC test account 
 using the link 
 https://adwords.google.com/um/StartNewMccAccount?testAccount=true. 
 It's redirect me to a create page and make me verify the account with 
 email, then, after click to the verify link in the email, i still see 
 the 
 adword page with no indicator of test account. I tried quite sometimes 
 but 
 to no avail.

 My customer id:
 Customer ID: 400-582-1814

 Please make a check and help me.

 Thanks.


 Vào 03:20:49 UTC+7 Thứ tư, ngày 22 tháng một năm 2014, Adwords Test 
 đã viết:
>
> Hello, 
>
> Sorry for the delay. So I attempted to create a new test account 
> using the same link, it seems to redirect me to this new page (
> https://accounts.google.com/ServiceLogin?service=adwords&hl=en-US )
>

Getting Incomplete Sign Up Error - Adwords API

[ez . latentview]

I am trying to access Adwords API using Python. MCC ID:959-154-6985
Test Account ID: 527-158-8028

I have signed up, provided the billing details, and accepted the TnCs. A 
credit card detail is showing up. Location - India. However, a mail from 
Google clarifies that credit cards are not accepted. Some invoicing is 
mentioned. 

Anyone knows how to setup this.

@Google guys - can u pls help me on this.

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Auction Insights Report

[Ludo Jambrich]

Hi Charles,

did you manage to parse out the data from the report?

thanx for info

Ludo

On Friday, May 23, 2014 12:41:41 AM UTC+2, charles wrote:
>
> On Thursday, May 22, 2014 3:49:42 AM UTC-7, Tomasz Tybon wrote:
>>
>> > 2. have server-side script deal with csv file when it arrives
>>
>> But reports do not contain CSV files only direct link to report in 
>> Adwords Panel
>>
>
> After poking around in JavaScript Console I found that the direct link in 
> the email contains all of the query string params you need to send a 
> request for the csv download except for the token.
>
> Example email link: https://adwords.google.com/cm/CampaignMgmt?frag=repd. is here>/&__u=&__c=
>
> And you can make requests to this URL to start the download: 
> https://adwords.google.com/cm/reportdownload?__rd=&__rrd=
> &__u=&__c=&token=
>
> I'm not sure what's the best way to deal with this, but after some quick 
> Google-fu I found this post which looks like it could work: 
> http://tanshio.net/adwords-report-download-by-casperjs/. (I plan to try 
> this later on in the week.)
>
> However, perhaps there's a way to do this with our dev token using Oauth2.
>
> Thoughts?
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [QuotaCheckError.INCOMPLETE_SIGNUP Adwords API

[ez . latentview]

Hey Danial.

Thanks for the reply. I do understand that the approval process will take 
time. However, I am trying to access using a Test account. And I understand 
that the API call should be a success, and it should return a dummy value. 
Right?

This error comes up when I try to access the account via the test account.


On Friday, June 27, 2014 5:20:34 PM UTC+5:30, Danial Klimkin wrote:
>
> Hello,
>
>
> Please see:
>
>   https://groups.google.com/forum/#!topic/adwords-api/rp0HFwu-E0M
>
>
> -Danial, AdWords API Team.
>
>
> On Friday, June 27, 2014 10:12:16 AM UTC+4, ez.lat...@gmail.com wrote:
>>
>>
>> MCC Account: 959-154-6985
>> test Account: 527-158-8028
>>
>> Dev Token Status: Pending
>> Billing Details Entered. Accepted TnCs.
>>
>> I get "[QuotaCheckError.INCOMPLETE_SIGNUP" error when I try to connect 
>> via API (python)
>>
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [QuotaCheckError.INCOMPLETE_SIGNUP Adwords API

[Danial Klimkin]

Hello,


Test accounts still require valid billing details and signed Terms and 
Conditions. Please fill in the form at the end of the post I've linked, the 
reviews team can provide more details about sign up.


-Danial, AdWords API Team.


On Saturday, June 28, 2014 10:59:07 AM UTC+4, ez.lat...@gmail.com wrote:
>
> Hey Danial.
>
> Thanks for the reply. I do understand that the approval process will take 
> time. However, I am trying to access using a Test account. And I understand 
> that the API call should be a success, and it should return a dummy value. 
> Right?
>
> This error comes up when I try to access the account via the test account.
>
>
> On Friday, June 27, 2014 5:20:34 PM UTC+5:30, Danial Klimkin wrote:
>>
>> Hello,
>>
>>
>> Please see:
>>
>>   https://groups.google.com/forum/#!topic/adwords-api/rp0HFwu-E0M
>>
>>
>> -Danial, AdWords API Team.
>>
>>
>> On Friday, June 27, 2014 10:12:16 AM UTC+4, ez.lat...@gmail.com wrote:
>>>
>>>
>>> MCC Account: 959-154-6985
>>> test Account: 527-158-8028
>>>
>>> Dev Token Status: Pending
>>> Billing Details Entered. Accepted TnCs.
>>>
>>> I get "[QuotaCheckError.INCOMPLETE_SIGNUP" error when I try to connect 
>>> via API (python)
>>>
>>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Created a test account but it didn't work

[Danial Klimkin]

Hello,


Cancelling an AdWords account can take some time (possibly weeks). Please 
create a new google account (like gmail email) and start from scratch.


-Danial, AdWords API Team.


On Friday, June 27, 2014 7:00:15 PM UTC+4, adwords-...@centro.net wrote:
>
> Danial,
>
> Thanks for the response. I cancelled the adwords account and tried to 
> create a new one. It goes to a page that says "Creating Test Account" that 
> doesn't do anything.
>
>
> 
>
>
>
> On Friday, June 27, 2014 6:49:28 AM UTC-5, Danial Klimkin wrote:
>>
>> Hello,
>>
>>
>> We had a temporary issue resulting in a normal (non-test) account being 
>> created by this form. This issue should be resolved now.
>>
>> Please try creating a new test MCC account again.
>>
>>
>> -Danial, AdWords API Team.
>>
>>
>> On Friday, June 27, 2014 2:35:57 AM UTC+4, adwords-...@centro.net wrote:
>>>
>>> I created a test account by visiting here: 
>>> https://adwords.google.com/um/StartNewMccAccount?testAccount=true
>>>
>>> However, when I log into the account, it doesn't have the red bar that 
>>> says "This is a test account" so I assume it's not. Is test account 
>>> creation broken? Can I convert this account to a test account now?
>>>
>>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: API Token

[Danial Klimkin]

Hello Paul,


Please fill in the form in the last paragraph of the message I've linked. 
The reviews team can help you with the sign up process.


-Danial, AdWords API Team.


On Sunday, June 29, 2014 11:09:04 PM UTC+4, Paul Remote-Keys wrote:
>
> Hi Danial
>
> Thank you for your reply/ Before we even received it, all of the steps had 
> been taken correctly. We even got another T&C to sign, which we did and 
> sent back, but the token is still not accepting due to 'incomplete signup'.
>
> I am really pressed for time on this project as I have number of 
> auto-locksmiths in the UK who expected to be live with their advertising by 
> now.
>
> Any insight you could give would be great?
>
> Thanks
>
> Paul
>
> 
> http://schemas.xmlsoap.org/soap/envelope/";>
>   
> https://adwords.google.com/api/adwords/cm/v201402";>
>   0004fcfd92c68db00aec586dca002f9b
>   CampaignService
>   get
>   0
>   545
> 
>   
>   
> 
>   soap:Server
>   [QuotaCheckError.INCOMPLETE_SIGNUP @ ; 
> trigger:'']
>   
> https://adwords.google.com/api/adwords/cm/v201402";>
>   [QuotaCheckError.INCOMPLETE_SIGNUP @ ; 
> trigger:'']
>   
> ApiException
>   http://www.w3.org/2001/XMLSchema-instance"; 
> xsi:type="QuotaCheckError">
> 
> 
> QuotaCheckError.INCOMPLETE_SIGNUP
> QuotaCheckError
> INCOMPLETE_SIGNUP
>   
> 
>   
> 
>   
> 
>
>
>
> On Thursday, 26 June 2014 15:01:35 UTC+1, Paul Remote-Keys wrote:
>>
>> Hi Guys
>>
>> Customer ID: 400-994-7983
>>
>> We went through the process of setting up and completing all the 
>> documentation for the API Token.  I see the token but it still says pending 
>> . . . . 
>>
>> Any way to find out how long this takes as we are in 'stop' mode until we 
>> can get over this.  Got some 45 campaigns to post, with around 50,000 
>> keywords - each with their own destination URL . . . .  manual is not an 
>> option.
>>
>> Thanks
>>
>>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Creating a MCC test account.

[H]

Hi Christian

We had the exact same problem, but I can assure you the link now works 
(having created test accounts on Friday and today).

Make sure you log out of all Google accounts before you follow the link ... 
I know that's something others have recommended, and it's what I did too.

Cheers
H

On Monday, June 30, 2014 10:55:47 AM UTC+1, Christian Wolf wrote:
>
> Hi,
>
> we are planning to test the AdWords API, but we can't set up the necessary 
> MCC Test Account: whenever we use your provided link, the account creation 
> wizard will end up in creating a "normal" AdWords account instead of an MCC 
> test account. We tried with many different email addresses and both new or 
> existing google accounts.
>
> Is it possible to create a production MCC account and "switch" it to a MCC 
> test account afterwards?
>
> Best,
> Christian
>
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Creating a MCC test account.

[Christian Wolf]

Hi H,

thank you for pointing us in the right direction - although we logged out 
of all accounts, we could not create a MCC test account.

However, we tried using the Chrome incognito mode, and had success - maybe 
"log out" inside a personlized Chrome is not the log out needed. While 
setting up the account in the privacy mode, we never left the actual setup 
page and were able to create a test MCC account (we got a redirect to the 
AdWords setup page in the normal mode of Chrome).

tl;dr: if you run into this, try using Chrome's privacy mode for the MCC 
test account,

thanks again,
best,
Christian


Am Montag, 30. Juni 2014 13:27:30 UTC+2 schrieb H:
>
> Hi Christian
>
> We had the exact same problem, but I can assure you the link now works 
> (having created test accounts on Friday and today).
>
> Make sure you log out of all Google accounts before you follow the link 
> ... I know that's something others have recommended, and it's what I did 
> too.
>
> Cheers
> H
>
> On Monday, June 30, 2014 10:55:47 AM UTC+1, Christian Wolf wrote:
>>
>> Hi,
>>
>> we are planning to test the AdWords API, but we can't set up the 
>> necessary MCC Test Account: whenever we use your provided link, the account 
>> creation wizard will end up in creating a "normal" AdWords account instead 
>> of an MCC test account. We tried with many different email addresses and 
>> both new or existing google accounts.
>>
>> Is it possible to create a production MCC account and "switch" it to a 
>> MCC test account afterwards?
>>
>> Best,
>> Christian
>>
>>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: What is the ID for "Amount Spent"

[Michael Cloonan (AdWords API Team)]

Hello,

If you're looking to retrieve billing information via the API, that's not 
currently possible. If the discrepancy is as large as you say, it looks 
like you may be making your report too restrictive. For example, maybe 
you're excluding campaigns or time ranges that you're interested in.

Regards,
Mike, AdWords API Team

On Saturday, June 28, 2014 10:49:57 PM UTC-4, Crystal wrote:
>
> Hi Mike, 
>
> Thanks for the reply. 
>
> I tried using Cost, but the amount is different with my MCC. 
>
> The report / tool that I'm currently developing will be based on: Campaign 
> Performance Report  (a monthly based report). 
>
> So instead of displaying the amount spent within that month, only 
> displaying a very low number like $19.00 (should be like $4000).
>
> I even tried TotalCost, still not the same. 
>
> (>_<)
>
>
>
>
> On Wednesday, June 25, 2014 7:43:26 AM UTC-7, Michael Cloonan (AdWords API 
> Team) wrote:
>>
>> Hello,
>>
>> In our various performance reports, I believe the column that most 
>> closely corresponds to what you're asking for is Cost. If this is not what 
>> you wanted, please give me more information about what kind of report 
>> you're running and what kind of information you are looking to get.
>>
>> Regards,
>> Mike, AdWords API Team
>>
>> On Tuesday, June 24, 2014 2:09:03 PM UTC-4, Crystal wrote:
>>>
>>> I need to know the exact ID name for "Amount Spent" 
>>>
>>> I went here: 
>>> https://developers.google.com/adwords/api/docs/appendix/reports and 
>>> couldn't find it. 
>>>
>>> I need someone to provide me with the ID name (not the URL for 
>>> reference) to get the data from AdWords. 
>>>
>>> Thanks! 
>>>
>>>
>>>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [InternalApiError.UNEXPECTED_INTERNAL_API_ERROR @ com.google.ads.api.services.common.error.InternalApiError.(InternalApiErro] this morning

[SL]

Also where is "reply to author" all I see is the "Post Reply" button?
Sam

On Friday, June 27, 2014 7:38:03 PM UTC-4, Ray Tsang (AdWords API Team) 
wrote:
>
> Sam,
>
> Please provide full request/response XML by using the "reply to author" 
> function.
>
> Thanks!
>
> Ray
>
> On Friday, June 27, 2014 9:15:54 AM UTC-7, SL wrote:
>>
>> It now changed to  [InternalApiError.UNEXPECTED_INTERNAL_API_ERROR @ 
>> com.google.ads.api.services.common.error.InternalApiError.(InternalApiErro]
>> Thanks,
>> Sam
>>
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [InternalApiError.UNEXPECTED_INTERNAL_API_ERROR @ com.google.ads.api.services.common.error.InternalApiError.(InternalApiErro] this morning

[david]

The dropdown beside "Post Reply" button contains "Reply privately to author"

On Monday, 30 June 2014 14:32:27 UTC+1, SL wrote:
>
> Also where is "reply to author" all I see is the "Post Reply" button?
> Sam
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Error when trying to create Root Product Partition for shopping campaign

[Chuck Reeves]

David,

Thank you that is what was wrong.  I found that the test code was creating 
a new ProductOfferId('');  Once I took that out, it worked just fine.

On Friday, June 27, 2014 11:23:42 AM UTC-4, david wrote:
>
> Try sending the caseValue clause without a value at all (instead with an 
> empty value). That's what worked for us certainly.
>
> 
> 
>
> On Friday, 27 June 2014 15:59:14 UTC+1, Chuck Reeves wrote:
>>
>> Ray,
>>
>> Thank you for the help.  I am now sending the REMOVE and ADD based on the 
>> guides your provided.  Now I am now getting a different error:
>>
>> AdGroupCriterionError.PRODUCT_PARTITION_SUBDIVISION_REQUIRES_OTHERS_CASE 
>> @ operations; trigger:'ProductPartition{id=TempCriterionId{id=1}, 
>> bidSimulatorStatus=null, partitionType=SUBDIVISION, parentCriterionId=null, 
>> productGroup=null, caseValue=null, decisionPath=[]}'
>>
>> I am under the impression that sending a ProductOfferId with an empty 
>> value, creates the OTHERS_CASE the API is looking for.  It appears my 
>> impression is false.  I have been digging though the docs trying to find 
>> out how to set this up, but the only examples I can find, are using 
>> ProductBrand, ProductCanoicalCondidiont, or ProductBiddingCategory.  Any 
>> further help with how to set this up with the ProductOfferId would be much 
>> appreciated 
>>
>>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: MutateJobService for Shopping campaigns?

[Josh Radcliff (AdWords API Team)]

Hi,

Your assumption is correct - we still do not support MutateJobService calls 
for shopping campaigns.

Cheers,
Josh, AdWords API Team

On Friday, June 27, 2014 6:11:28 AM UTC-4, david wrote:
>
> Can I confirm if this error is still at large?
> I encountered the same error today while using the MutateJobService to add 
> product partitions to an ad group in a shopping campaign.
> Don't want to assume it is the same error, but sounds like it.
>
> On Thursday, 22 May 2014 20:50:22 UTC+1, Josh Radcliff (AdWords API Team) 
> wrote:
>>
>> Hi,
>>
>> At this time you cannot use AdGroupCriterionOperation 
>> s
>>  for 
>> ad groups of shopping campaigns in a MutateJobService call. We're aware of 
>> this issue and are working on it. I'll post here when I have an update.
>>
>> Cheers,
>> Josh, AdWords API Team
>>
>>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: What is the ID for "Amount Spent"

[Michael Cloonan (AdWords API Team)]

Hello,

I just confirmed by running some reports on my end that the column you 
indicated is indeed the Cost column when using API reports. If you are 
seeing a discrepancy between the front end and the API, that is likely 
because you aren't using the same predicates as the front end report. Make 
sure that you have the same timeframe and other restrictions and then try 
again.

Regards,
Mike, AdWords API Team

On Monday, June 30, 2014 12:06:47 PM UTC-4, Crystal wrote:
>
> Hi Mike, 
>
> This is the are that I'd like to retrieve please see the attached document 
> / image.
>
>
>
> On Monday, June 30, 2014 6:03:29 AM UTC-7, Michael Cloonan (AdWords API 
> Team) wrote:
>>
>> Hello,
>>
>> If you're looking to retrieve billing information via the API, that's not 
>> currently possible. If the discrepancy is as large as you say, it looks 
>> like you may be making your report too restrictive. For example, maybe 
>> you're excluding campaigns or time ranges that you're interested in.
>>
>> Regards,
>> Mike, AdWords API Team
>>
>> On Saturday, June 28, 2014 10:49:57 PM UTC-4, Crystal wrote:
>>>
>>> Hi Mike, 
>>>
>>> Thanks for the reply. 
>>>
>>> I tried using Cost, but the amount is different with my MCC. 
>>>
>>> The report / tool that I'm currently developing will be based on: 
>>> Campaign Performance Report  (a monthly based report). 
>>>
>>> So instead of displaying the amount spent within that month, only 
>>> displaying a very low number like $19.00 (should be like $4000).
>>>
>>> I even tried TotalCost, still not the same. 
>>>
>>> (>_<)
>>>
>>>
>>>
>>>
>>> On Wednesday, June 25, 2014 7:43:26 AM UTC-7, Michael Cloonan (AdWords 
>>> API Team) wrote:

 Hello,

 In our various performance reports, I believe the column that most 
 closely corresponds to what you're asking for is Cost. If this is not what 
 you wanted, please give me more information about what kind of report 
 you're running and what kind of information you are looking to get.

 Regards,
 Mike, AdWords API Team

 On Tuesday, June 24, 2014 2:09:03 PM UTC-4, Crystal wrote:
>
> I need to know the exact ID name for "Amount Spent" 
>
> I went here: 
> https://developers.google.com/adwords/api/docs/appendix/reports and 
> couldn't find it. 
>
> I need someone to provide me with the ID name (not the URL for 
> reference) to get the data from AdWords. 
>
> Thanks! 
>
>
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [InternalApiError.UNEXPECTED_INTERNAL_API_ERROR @ com.google.ads.api.services.common.error.InternalApiError.(InternalApiErro] this morning

[Ray Tsang (AdWords API Team)]

Sam,

You'll want to check out the wiki on capturing the log 

 
for the DotNet client library.  That being said, one trick is to make sure 
you disable gzip compression when you try to catpure the log.

Thanks,

Ray

On Sunday, June 29, 2014 11:59:59 AM UTC-4, SL wrote:
>
> Where would I find this information, I am using the C# examples as the 
> basis for may code and can put a break point in the appropriate place if 
> you tell me the file name and code line? 
> Thanks in advance,
> Sam
>
> On Friday, June 27, 2014 7:38:03 PM UTC-4, Ray Tsang (AdWords API Team) 
> wrote:
>>
>> Sam,
>>
>> Please provide full request/response XML by using the "reply to author" 
>> function.
>>
>> Thanks!
>>
>> Ray
>>
>> On Friday, June 27, 2014 9:15:54 AM UTC-7, SL wrote:
>>>
>>> It now changed to  [InternalApiError.UNEXPECTED_INTERNAL_API_ERROR @ 
>>> com.google.ads.api.services.common.error.InternalApiError.(InternalApiErro]
>>> Thanks,
>>> Sam
>>>
>>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Use AdGroup CPC setting for AdGroupCriterion within Shopping campaigns

[Jakub Adamus]

Hi, is there any possibilty to achieve creating new *ProductPartition in 
ShoppingCampaign*, which is Biddable, but with CPC set only at AdGroup 
level?

When i try to create BiddableAdGroupCriterion:

   - without biddingStrategyConfiguration - error, it's required
   - without biddingStrategyConfiguration.bids - error, it's required
   - with biddingStrategyConfiguration.bids[].bid = 0 - erorr, it's invalid 
   bid
   - with biddingStrategyConfiguration.biddingStrategyType = 'NONE' - 
   error, it's not permitted for shopping campaign
   

So is there any other way to create BiddableAdGroupCriterion 
(ProductPartition UNIT type) without setting CPC (and achieve CpcBidSource 
= GROUP instead of CRITERION). AdWords UI can do this.


-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

API Test Account Setup Unclear

[Mike Smith]

Hello, I am trying to set up a test account so I can work with my "real 
account" API Token while it is in Pending Status.


I have tried to follow Google's instructions. I have my "real" MCC account 
application pending and I have an API token. So I went to Google's 
instructions on how to set up a test account 
[https://developers.google.com/adwords/api/docs/test-accounts] I have step 
1 complete so on step 2 they give you a link to a "new account" set up. 
Which I did, however I don't see where this new account is a "test" account 
and this account is not a Test MCC account either? So do I need to create a 
seperate new TestMCC account and then link my new test account to it, and 
if so how do I know that it is a test account for API purposes and not a 
real account?


Thank You, can't wait to start bidding via the API

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

How to specify "Exact" keyword match type while using TargetingIdeaService?

[Vishal Chawla]

Hi,

I am trying to get Average Monthly Search for a keyword using the Adwords 
API (v201402) in PHP. For this I am using the TagretingIdeaService 

 by 
specifying my keyword in the *queries* parameter of 
RelatedToQuerySearchParameter 

.

The response contains data only for the related keywords but not the exact 
keyword. I do not find any parameter to specify the *MatchType* as *Exact*. 
The Adwords Web Interface shows the exact keyword data and related keyword 
data in two different tables.

Is there any way to get the exact keyword data via API?

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

PartnerSearchNetwork versus SearchNetwork

[infospacecorp]

Now that we're upgrading to v201402, we're coming across the new field 
AdvertisingChannelType when creating a new campaign. The documentation 
seems to indicate that this is a higher level than NetworkSettings, so 
we're experimenting as to how campaigns are created through the API with 
various AdvertisingChannelTypes and various NetworkSettings. The results 
are confusing.


Our biggest confusion is around NetworkSettings.PartnerSearchNetwork. If we 
create a campaign with SearchNetwork=true and PartnerSearchNetwork=true, it 
creates the same campaign in AdWords center as if we created it with 
SearchNetwork=true and PartnerSearchNetwork=false. There doesn't seem to be 
any indication on AdWords if the campaign was created through the API with 
PartnerSearchNetwork or not.


Can I get some clarification around PartnerSearchNetwork? Does the field 
have any meaning in the current API? Would the results be different if I 
created a campaign with SearchNetwork=false and PartnerSearchNetwork=true?

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Create biddable ProductPartition without setting CPC on Criterion level (Shopping campaigns)

[Jakub Adamus]

Hi, is there any possibilty to achieve creating new *ProductPartition in 
ShoppingCampaing*, which is Biddable, but with CPC set only at AdGroup 
level?

When i try to create BiddableAdGroupCriterion:

   - without biddingStrategyConfiguration - error, it's required
   - without biddingStrategyConfiguration.bids - error, it's required
   - with biddingStrategyConfiguration.bids[].bid = 0 - erorr, it's invalid 
   bid
   - with biddingStrategyConfiguration.biddingStrategyType = 'NONE' - 
   error, it's not permitted for shopping campaign
   

So is there any other way to create BiddableAdGroupCriterion 
(ProductPartition UNIT type) without setting CPC (and achieve CpcBidSource 
= GROUP instead of CRITERION). AdWords UI can do this.

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

SearchNetwork vs PartnerSearchNetwork

[infospacecorp]

Now that we're upgrading to v201402, we're coming across the new field 
AdvertisingChannelType when creating a new campaign. The documentation 
seems to indicate that this is a higher level than NetworkSettings, so 
we're experimenting as to how campaigns are created through the API with 
various AdvertisingChannelTypes and various NetworkSettings. The results 
are confusing.


Our biggest confusion is around NetworkSettings.PartnerSearchNetwork. If we 
create a campaign with SearchNetwork=true and PartnerSearchNetwork=true, it 
creates the same campaign in AdWords center as if we created it with 
SearchNetwork=true and PartnerSearchNetwork=false. There doesn't seem to be 
any indication on AdWords if the campaign was created through the API with 
PartnerSearchNetwork or not.


Can I get some clarification around PartnerSearchNetwork? Does the field 
have any meaning in the current API? Would the results be different if I 
created a campaign with SearchNetwork=false and PartnerSearchNetwork=true?

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

How to get "Exact" match keyword result while using TargetingIdeaService (v201402)?

[Vishal Chawla]

I am trying to get Average Monthly Search for a keyword using the Adwords 
API (v201402) in PHP. For this I am using the TagretingIdeaService 

 by 
specifying my keyword in the *queries* parameter of 
RelatedToQuerySearchParameter 

.

Strangely, the response contains data only for the related keywords but not 
the exact keyword. I do not find any parameter to specify the *MatchType*
 as *Exact*. The Adwords Web Interface shows the exact keyword data and 
related keyword data in two different tables.

Is there any way to get the exact keyword data via API?

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Missing Impression Data for PLA Campaigns May 6-20, 2014

[Ray Tsang (AdWords API Team)]

Charlie,

Please also send me the corresponding response in private. 

Thanks,

Ray

On Friday, June 27, 2014 2:59:22 PM UTC-4, Charlie Saunders wrote:
>
> Hello all,
>
> I'm having an issue where my API downloads contain no impression data for 
> Product Listing Ads campaigns for May 6 through May 20, 2014.  I see 
> impressions in the web interface for these campaigns and I have data for 
> other metrics (e.g. clicks, cost) during that period.
>
> Any ideas for a solution?
>
> Here is the beautified SOAP:
>
>> 
>> https://adwords.google.com/api/adwords/cm/v201402";>
>> 
>> Query
>> Date
>> CampaignName
>> AdGroupName
>> KeywordTextMatchingQuery
>> AveragePosition
>> Clicks
>> Impressions
>> Cost
>> Conversions
>> TotalConvValue
>> 
>> CampaignName
>> IN
>> (ROI) Product Listing Ads
>> (ROI) Product Listing Ads - ID
>> (ROI) Product Listing Ads Shopping
>> 
>> 
>> 20140501
>> 20140626
>> 
>> 
>> SEARCH_QUERY_PERFORMANCE_REPORT 
>> #1403893553529
>> SEARCH_QUERY_PERFORMANCE_REPORT
>> CUSTOM_DATE
>> TSV
>> 
>> 2014-06-27 14:26:07,177 INFO c.g.a.a.a.l.u.report_download [main] 
>> Response received with status code 200 and message: OK
>
>
> Thank you! 
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: ProductPartition - InternalApiError - Github example

[Ray Tsang (AdWords API Team)]

Nam,

Please send me the full request/response XML in private by using the reply 
to author function.

Thanks,

Ray

On Sunday, June 29, 2014 11:48:35 PM UTC-4, Nam Ngo wrote:
>
>
> - Client library used: googleads-python-lib
>
> - Example used: 
> https://github.com/googleads/googleads-python-lib/blob/master/examples/adwords/v201402/shopping/add_product_partition_tree.py
>
> - Exception raised: WebFault: Server raised fault: 
> '[InternalApiError.UNEXPECTED_INTERNAL_API_ERROR @ 
> com.google.ads.api.services.common.error.InternalApiError.(InternalApiErro]'
>
> - I'm using MCC test account.
>
>
>
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: API Access still not resolved

[Ray Tsang (AdWords API Team)]

Paul,

This seems to be a second post.  We've had several threads w/ the same 
issue - please review our guide to the INCOMPLETE_SIGNUP problem 
. 
 If all fails, please follow step #4.

Thanks!

Ray

On Sunday, June 29, 2014 3:01:08 PM UTC-4, Paul Remote-Keys wrote:
>
> Guys
>
> I don't know what to do now.
>
> We have jumped through every hoop, signed and agreed to every set of terms 
> & conditions. Done everything we have been asked.  Still, the token cannot 
> be used in the test MCC (or the production obviously).
>
> Is anyone else having these having these issues and how did you get it 
> resolved? I am paying development staff to sit around at present as we can 
> move no further forward until we can get connected . . 
>
> Manager ID: 400-994-7983
>
> 
> http://schemas.xmlsoap.org/soap/envelope/";>
>   
> https://adwords.google.com/api/adwords/cm/v201402";>
>   0004fcfd92c68db00aec586dca002f9b
>   CampaignService
>   get
>   0
>   545
> 
>   
>   
> 
>   soap:Server
>   [QuotaCheckError.INCOMPLETE_SIGNUP @ ; 
> trigger:'']
>   
> https://adwords.google.com/api/adwords/cm/v201402";>
>   [QuotaCheckError.INCOMPLETE_SIGNUP @ ; 
> trigger:'']
>   
> ApiException
>   http://www.w3.org/2001/XMLSchema-instance"; 
> xsi:type="QuotaCheckError">
> 
> 
> QuotaCheckError.INCOMPLETE_SIGNUP
> QuotaCheckError
> INCOMPLETE_SIGNUP
>   
> 
>   
> 
>   
> 
>
> Again, we have followed all correct procedures. We have signed now (two) 
> lots of T&Cs and also submitted all paperword, docus, etc . . . 
>
> Any ideas??
>
> Thanks
>
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Problem adwords remarketing

[Ray Tsang (AdWords API Team)]

Hi,

This sounds like a general AdWords issue.  Please redirect the issue to the 
general 
AdWords community .

Thanks,

Ray

On Friday, June 27, 2014 11:58:52 AM UTC-4, myfitn...@gmail.com wrote:
>
> Hello guys today I implemented remarketing dynamic, but I have problems 
> with the tag: I'll tell you regarding products remarketing tag works 
> without problems, but with regard to the remarketing tag with category or  
> home giving me errors because according to you? 
>
> I tried to analyze other websites and they all use the exact same tags! 
>
> I used to analyze the remarketing tag assistance of google chrome! 
>
> The site in question is this www. myfitness .es 
>
> Could you help me understand why the remarketing works only for products? 
>
> Thanks to all
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: API Test Account Setup Unclear

[Ray Tsang (AdWords API Team)]

Mike,

Could I trouble you to send me a screenshot of the newly created test 
account? (by using the reply to author feature)

Thanks,

Ray

On Monday, June 30, 2014 10:48:05 AM UTC-4, Mike Smith wrote:
>
> Hello, I am trying to set up a test account so I can work with my "real 
> account" API Token while it is in Pending Status.
>
>
> I have tried to follow Google's instructions. I have my "real" MCC account 
> application pending and I have an API token. So I went to Google's 
> instructions on how to set up a test account [
> https://developers.google.com/adwords/api/docs/test-accounts] I have step 
> 1 complete so on step 2 they give you a link to a "new account" set up. 
> Which I did, however I don't see where this new account is a "test" account 
> and this account is not a Test MCC account either? So do I need to create a 
> seperate new TestMCC account and then link my new test account to it, and 
> if so how do I know that it is a test account for API purposes and not a 
> real account?
>
>
> Thank You, can't wait to start bidding via the API
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Use AdGroup CPC setting for AdGroupCriterion within Shopping campaigns

[Ray Tsang (AdWords API Team)]

Jakub,

This seems to be a double post.  Let's continue the conversion in the other 
thread.

Thanks,

On Saturday, June 28, 2014 9:29:05 AM UTC-4, Jakub Adamus wrote:
>
> Hi, is there any possibilty to achieve creating new *ProductPartition in 
> ShoppingCampaign*, which is Biddable, but with CPC set only at AdGroup 
> level?
>
> When i try to create BiddableAdGroupCriterion:
>
>- without biddingStrategyConfiguration - error, it's required
>- without biddingStrategyConfiguration.bids - error, it's required
>- with biddingStrategyConfiguration.bids[].bid = 0 - erorr, it's 
>invalid bid
>- with biddingStrategyConfiguration.biddingStrategyType = 'NONE' - 
>error, it's not permitted for shopping campaign
>
>
> So is there any other way to create BiddableAdGroupCriterion 
> (ProductPartition UNIT type) without setting CPC (and achieve CpcBidSource 
> = GROUP instead of CRITERION). AdWords UI can do this.
>
>
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: PartnerSearchNetwork versus SearchNetwork

[Ray Tsang (AdWords API Team)]

Hi,

The partner search network setting can only be set for specific partner 
accounts 
.
 
 Most of the users should only set it to false 

.

Thanks,

Ray

On Friday, June 27, 2014 8:19:43 PM UTC-4, infosp...@gmail.com wrote:
>
> Now that we're upgrading to v201402, we're coming across the new field 
> AdvertisingChannelType when creating a new campaign. The documentation 
> seems to indicate that this is a higher level than NetworkSettings, so 
> we're experimenting as to how campaigns are created through the API with 
> various AdvertisingChannelTypes and various NetworkSettings. The results 
> are confusing.
>
>
> Our biggest confusion is around NetworkSettings.PartnerSearchNetwork. If 
> we create a campaign with SearchNetwork=true and PartnerSearchNetwork=true, 
> it creates the same campaign in AdWords center as if we created it with 
> SearchNetwork=true and PartnerSearchNetwork=false. There doesn't seem to be 
> any indication on AdWords if the campaign was created through the API with 
> PartnerSearchNetwork or not.
>
>
> Can I get some clarification around PartnerSearchNetwork? Does the field 
> have any meaning in the current API? Would the results be different if I 
> created a campaign with SearchNetwork=false and PartnerSearchNetwork=true?
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: SearchNetwork vs PartnerSearchNetwork

[Ray Tsang (AdWords API Team)]

Hi,

This appears to be a double posting.  Let's continue the discussion on the 
other thread.

Thanks!

Ray

On Friday, June 27, 2014 7:18:04 PM UTC-4, infosp...@gmail.com wrote:
>
> Now that we're upgrading to v201402, we're coming across the new field 
> AdvertisingChannelType when creating a new campaign. The documentation 
> seems to indicate that this is a higher level than NetworkSettings, so 
> we're experimenting as to how campaigns are created through the API with 
> various AdvertisingChannelTypes and various NetworkSettings. The results 
> are confusing.
>
>
> Our biggest confusion is around NetworkSettings.PartnerSearchNetwork. If 
> we create a campaign with SearchNetwork=true and PartnerSearchNetwork=true, 
> it creates the same campaign in AdWords center as if we created it with 
> SearchNetwork=true and PartnerSearchNetwork=false. There doesn't seem to be 
> any indication on AdWords if the campaign was created through the API with 
> PartnerSearchNetwork or not.
>
>
> Can I get some clarification around PartnerSearchNetwork? Does the field 
> have any meaning in the current API? Would the results be different if I 
> created a campaign with SearchNetwork=false and PartnerSearchNetwork=true?
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: How to get "Exact" match keyword result while using TargetingIdeaService (v201402)?

[Ray Tsang (AdWords API Team)]

Vishal,

Could I trouble you to show me a screenshot of what you are referring to?

Thanks,

Ray

On Saturday, June 28, 2014 3:04:08 AM UTC-4, Vishal Chawla wrote:
>
> I am trying to get Average Monthly Search for a keyword using the Adwords 
> API (v201402) in PHP. For this I am using the TagretingIdeaService 
> 
>  by 
> specifying my keyword in the *queries* parameter of 
> RelatedToQuerySearchParameter 
> 
> .
>
> Strangely, the response contains data only for the related keywords but 
> not the exact keyword. I do not find any parameter to specify the 
> *MatchType* as *Exact*. The Adwords Web Interface shows the exact keyword 
> data and related keyword data in two different tables.
>
> Is there any way to get the exact keyword data via API?
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: How to specify "Exact" keyword match type while using TargetingIdeaService?

[Ray Tsang (AdWords API Team)]

Vishal,

This appears to be a duplicate.  Let's continue the discussion in the other 
thread.

Thanks!

Ray

On Saturday, June 28, 2014 2:43:31 AM UTC-4, Vishal Chawla wrote:
>
> Hi,
>
> I am trying to get Average Monthly Search for a keyword using the Adwords 
> API (v201402) in PHP. For this I am using the TagretingIdeaService 
> 
>  by 
> specifying my keyword in the *queries* parameter of 
> RelatedToQuerySearchParameter 
> 
> .
>
> The response contains data only for the related keywords but not the exact 
> keyword. I do not find any parameter to specify the *MatchType* as *Exact*. 
> The Adwords Web Interface shows the exact keyword data and related keyword 
> data in two different tables.
>
> Is there any way to get the exact keyword data via API?
>

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and Google+:
https://googleadsdeveloper.blogspot.com/
https://plus.google.com/+GoogleAdsDevelopers/posts
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.