> > On 2016-08-29 22:30, Philipp Klaus Krause wrote: >> On 29.08.2016 00:20, Benjamin Larsson wrote: >>> On 08/28/2016 11:30 PM, Philipp Klaus Krause wrote: >>>> On 28.08.2016 23:13, Benjamin Larsson wrote: >>>>> On 08/28/2016 11:03 PM, Philipp Klaus Krause wrote: >>>>>> Dear Benjamin, >>>>>> >>>>>> what tool are you using to write your program onto the board? >>>>>> >>>>>> Philipp >>>>> >>>>> Under windows I use simplicity studio with a UC6 device. Under linux >>>>> I >>>>> use ec2-new from https://github.com/paragonRobotics/ec2-new with the >>>>> same device. My own arduino programmer did not work with the F330. >>>>> >>>>> MvH >>>>> Benjamin Larsson >>>> I so far only used ec2-new. Did you try to write the program compiled >>>> with SDCC using simplicity studio? That would help rule out an ec2-new >>>> bug. >>>> >>>> Philipp >>>> >>> >>> I did lots of tinkering trying to get this to work, I am pretty sure I >>> did the reverse. Keil compiled hex flashed with ec2-new. But I can't >>> really trust my memory on that. I am pretty sure I dumped the flash and >>> compared the output. But I can redo it if you want. >>> >>> >>> MvH >>> Benjamin Larsson >> Please do. At the moment the only thing we really know is that SDCC + >> ec2-new does not work for the C8051F330. and we don't know why. If we >> can rule out ec2-new at least we know it is something in the .ihx >> generated by SDCC. >> Please check if writing the .ihx generated by SDCC using a tool other >> than ec2-new works. >> >> Philipp >> >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Sdcc-user mailing list >> Sdcc-user@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/sdcc-user >> > > Hi! > Maybe my comments here are not entirely in tune with the subject....but > I am just trying to help. > > Have not used the F330 myself, but I frequently use the F930 together > with SDCC. > My development is done in Silicon Labs IDE. The adapter is an old Serial > Adapter EC2 (Cygnal). > > I was surprised to see an .ihx file mentioned. > When I download my software to the boards, I always download the > <project_name>.omf file. > If you get an ".omf" file from your build, you might want to try that > file for download. > > BR > Joakim
Good point. When only linking in another module (use of generic pointers: gptrget/gptrput) gives different results, the location of code may have something to do with it. And since our .ihx file is fragmented and unordered, this may be a problem for ec2-new because it must erase the flash in pages. Please try again after post-processing the .ihx file with packihx. Maarten ------------------------------------------------------------------------------ _______________________________________________ Sdcc-user mailing list Sdcc-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sdcc-user
