hello again Georg O., I just realized one thing: to write or erase the flash, I first have to upload the respective routines to the RAM of the STM8. If I am not mistaken, you also use the "E_W_ROUTINEs_xK_ver_y.z“ files by STM, and compile them into the source code (siehe http://sourceforge.net/p/oggstreamer/stm8flasher/ci/master/tree/STM8_Routines/e_w_routines.c).
I have no problem with releasing my own code under GPL, but what about the code by STM? Or did you develop your own routines to interface to the ROM bootloader? If yes, I would rather use those - just to be on the safe side… For a brief feedback thanks a lot in advance! Regards, Georg I. Am 06.04.2014 um 13:45 schrieb Georg Icking-Konert <ick...@onlinehome.de>: > hello Georg O., > > sure, no problem. Actually I never bothered about license, yet. So how do I > release something under a GPL? Thanks a lot in advance! > > Regards, > Georg I. > > >> Message: 5 >> Date: Sun, 6 Apr 2014 09:52:05 +0200 >> From: ge...@otelo.or.at >> Subject: Re: [Sdcc-user] STM8 bootloader flash software >> To: sdcc-user@lists.sourceforge.net >> Message-ID: <37f905673b973d66f178ff3fa396c700.squir...@xaok.org> >> Content-Type: text/plain;charset=iso-8859-1 >> >> @Georg Icking-Konert - will you release your Bootloader-App under a GPL >> License? >> >> >>> Hi, >>> >>> my name is Georg (Georg O.) to make a difference ;) - >>> >>> I also wrote a UART-Flasher utility for STM8 - it is based on stm32flasher >>> as the share a similar bootloader protocoll. I must admit that stm8flasher >>> is a bit of a hack and only tested on STM8S105C6 - so I am happy to here >>> that there is an alternative to it. When I find time I will try your >>> flashsoftware and maybe drop stm8flasher. >>> >>> In any case here is the link: >>> http://sourceforge.net/p/oggstreamer/stm8flasher/ci/master/tree/ >>> >>> best wishes, Georg O. >>> >>> >>>> >>>> Am 05.04.2014 um 19:36 schrieb Master Postfach <1860-...@onlinehome.de>: >>>> >>>> hi, >>>> >>>> in below contribution I wanted to share a Windows/Linux/MacOSX >>>> application >>>> which allows uploading code to the STM8 via the built-in boot loader >>>> (i.e. >>>> not via SWIM). It is similar to the "Flash Loader Demonstrator" by STM, >>>> but portable. Since attachments seem to be removed automatically, I've >>>> uploaded it to http://www.cream-tea.de/public/STM_BSL_flasher.zip Hope >>>> somebody finds it useful... >>>> >>>> Regards, Georg >>>> >
------------------------------------------------------------------------------
_______________________________________________ Sdcc-user mailing list Sdcc-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sdcc-user
