It seems the avision backend is unmaintained again. You could try upgrading to a more recent version of sane, or one of our git snapshots, that sometimes helps.
allan On Sat, Sep 17, 2016 at 7:43 PM, David Niklas <do...@mail.com> wrote: > I hate to be a pest but it's been two weeks, should I send this somewhere > else. > >> Hello, >> I bought an hp scanjet 8200 from amazon and I can't get it to work. >> Here is a list of commands run and output lightly edited for brevity. >> Feel free to snip non relevant details. >> Thanks, in advance. >> >> % scanimage --version >> scanimage (sane-backends) 1.0.24; backend version 1.0.24 >> >> % equery l PACKAGE >> media-gfx/sane-backends-1.0.24-r6 >> media-gfx/sane-frontends-1.0.14 >> media-gfx/xsane-0.999-r1 >> media-gfx/simple-scan-3.18.2 >> >> % uname -a >> Linux ulgy_thing 4.1.15-gentoo-r1-nopreempt-dav2 #1 SMP x86_64 Intel(R) >> Pentium(R) CPU 2117U @ 1.80GHz GenuineIntel GNU/Linux >> >> % scanimage -v -d avision:libusb:004:029 > aa.pnm >> scanimage: open of device avision:libusb:004:029 failed: Operation not >> supported >> >> # In system log >> [scanimage] protocol/discovery/mdns.c 122: unable to add to multicast >> group: No such device_ >> >> % sane-find-scanner >> found USB scanner (vendor=0x03f0 [hp], product=0x0b01 [hp scanjet 8200]) >> at libusb:004:029 >> >> DEBUG INFO >> avision == 128 >> sanei_usb == 128 >> dll Looked at, but not needed as there was no problem here >> AFAIK. >> >> >> ################# DEBUG ~50 lines >> ################################################### [avision] try to >> write src, count: 2. [sanei_usb] sanei_usb_write_bulk: trying to write >> 2 bytes [sanei_usb] 000 00 >> 00 .. [sanei_usb] >> sanei_usb_write_bulk: wanted 2 bytes, wrote 2 bytes [avision] wrote 2 >> bytes [avision] avision_usb_status: timeout 10000, 1 retries >> [avision] ==> (bulk read) going down ... >> [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes >> [sanei_usb] 000 >> 00 . [sanei_usb] >> sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk >> read) got: 1, status: 0 [avision] adf_reset: write 2 complete. >> [avision] Timeouts: write: 30000, read: 30000, status: 10000 >> [avision] try to write cmd, count: 10. >> [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes >> [sanei_usb] 000 28 00 69 00 0A 0D 00 00 04 00 >> (.i....... [sanei_usb] sanei_usb_write_bulk: wanted 10 bytes, wrote 10 >> bytes [avision] wrote 10 bytes >> [avision] try to read 4 bytes >> [sanei_usb] sanei_usb_read_bulk: trying to read 4 bytes >> [sanei_usb] 000 00 00 02 >> 40 ...@ [sanei_usb] >> sanei_usb_read_bulk: wanted 4 bytes, got 4 bytes [avision] read 4 bytes >> [avision] avision_usb_status: timeout 10000, 1 retries >> [avision] ==> (bulk read) going down ... >> [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes >> [sanei_usb] 000 >> 00 . [sanei_usb] >> sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk >> read) got: 1, status: 0 [avision] adf_reset: raw data: >> [avision] [0] 00000000b 0o 0d 0x >> [avision] [1] 00000000b 0o 0d 0x >> [avision] [2] 00000010b 2o 2d 2x >> [avision] [3] 01000000b 100o 64d 40x >> [avision] get_accessories_info: Waiting while ADF firmware resets... >> [avision] wait_ready: sending TEST_UNIT_READY >> [avision] filling command to have a length of 10, was: 6 >> [avision] Timeouts: write: 30000, read: 15000, status: 15000 >> [avision] try to write cmd, count: 10. >> [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes >> [sanei_usb] 000 00 00 00 00 00 00 00 00 00 >> 00 .......... [sanei_usb] sanei_usb_write_bulk: >> wanted 10 bytes, wrote 10 bytes [avision] wrote 10 bytes >> [avision] avision_usb_status: timeout 15000, 1 retries >> [avision] ==> (bulk read) going down ... >> [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes >> [sanei_usb] 000 >> 00 . [sanei_usb] >> sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk >> read) got: 1, status: 0 [avision] get_accessories_info: Maximum retries >> attempted, ADF unresponsive. [avision] sane_open: additional probe >> failed: Operation not supported scanimage: open of device >> avision:libusb:004:029 failed: Operation not supported [avision] >> sane_exit: >> >> ############### DEBUG 27 lines scanimage -h -d avision:libusb:004:029 >> ############### [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes >> [sanei_usb] 000 >> 00 . [sanei_usb] >> sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk >> read) got: 1, status: 0 [avision] adf_reset: raw data: >> [avision] [0] 00000000b 0o 0d 0x >> [avision] [1] 00000000b 0o 0d 0x >> [avision] [2] 00000010b 2o 2d 2x >> [avision] [3] 01000000b 100o 64d 40x >> [avision] get_accessories_info: Waiting while ADF firmware resets... >> [avision] wait_ready: sending TEST_UNIT_READY >> [avision] filling command to have a length of 10, was: 6 >> [avision] Timeouts: write: 30000, read: 15000, status: 15000 >> [avision] try to write cmd, count: 10. >> [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes >> [sanei_usb] 000 00 00 00 00 00 00 00 00 00 >> 00 .......... [sanei_usb] sanei_usb_write_bulk: >> wanted 10 bytes, wrote 10 bytes [avision] wrote 10 bytes >> [avision] avision_usb_status: timeout 15000, 1 retries >> [avision] ==> (bulk read) going down ... >> [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes >> [sanei_usb] 000 >> 00 . [sanei_usb] >> sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk >> read) got: 1, status: 0 [avision] get_accessories_info: Maximum retries >> attempted, ADF unresponsive. [avision] sane_open: additional probe >> failed: Operation not supported scanimage: open of device >> avision:libusb:004:029 failed: Operation not supported > > > -- > sane-devel mailing list: sane-devel@lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > to sane-devel-requ...@lists.alioth.debian.org -- "well, I stand up next to a mountain- and I chop it down with the edge of my hand" -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
