I hate to be a pest but it's been two weeks, should I send this somewhere else.
> Hello, > I bought an hp scanjet 8200 from amazon and I can't get it to work. > Here is a list of commands run and output lightly edited for brevity. > Feel free to snip non relevant details. > Thanks, in advance. > > % scanimage --version > scanimage (sane-backends) 1.0.24; backend version 1.0.24 > > % equery l PACKAGE > media-gfx/sane-backends-1.0.24-r6 > media-gfx/sane-frontends-1.0.14 > media-gfx/xsane-0.999-r1 > media-gfx/simple-scan-3.18.2 > > % uname -a > Linux ulgy_thing 4.1.15-gentoo-r1-nopreempt-dav2 #1 SMP x86_64 Intel(R) > Pentium(R) CPU 2117U @ 1.80GHz GenuineIntel GNU/Linux > > % scanimage -v -d avision:libusb:004:029 > aa.pnm > scanimage: open of device avision:libusb:004:029 failed: Operation not > supported > > # In system log > [scanimage] protocol/discovery/mdns.c 122: unable to add to multicast > group: No such device_ > > % sane-find-scanner > found USB scanner (vendor=0x03f0 [hp], product=0x0b01 [hp scanjet 8200]) > at libusb:004:029 > > DEBUG INFO > avision == 128 > sanei_usb == 128 > dll Looked at, but not needed as there was no problem here > AFAIK. > > > ################# DEBUG ~50 lines > ################################################### [avision] try to > write src, count: 2. [sanei_usb] sanei_usb_write_bulk: trying to write > 2 bytes [sanei_usb] 000 00 > 00 .. [sanei_usb] > sanei_usb_write_bulk: wanted 2 bytes, wrote 2 bytes [avision] wrote 2 > bytes [avision] avision_usb_status: timeout 10000, 1 retries > [avision] ==> (bulk read) going down ... > [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes > [sanei_usb] 000 > 00 . [sanei_usb] > sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk > read) got: 1, status: 0 [avision] adf_reset: write 2 complete. > [avision] Timeouts: write: 30000, read: 30000, status: 10000 > [avision] try to write cmd, count: 10. > [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes > [sanei_usb] 000 28 00 69 00 0A 0D 00 00 04 00 > (.i....... [sanei_usb] sanei_usb_write_bulk: wanted 10 bytes, wrote 10 > bytes [avision] wrote 10 bytes > [avision] try to read 4 bytes > [sanei_usb] sanei_usb_read_bulk: trying to read 4 bytes > [sanei_usb] 000 00 00 02 > 40 ...@ [sanei_usb] > sanei_usb_read_bulk: wanted 4 bytes, got 4 bytes [avision] read 4 bytes > [avision] avision_usb_status: timeout 10000, 1 retries > [avision] ==> (bulk read) going down ... > [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes > [sanei_usb] 000 > 00 . [sanei_usb] > sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk > read) got: 1, status: 0 [avision] adf_reset: raw data: > [avision] [0] 00000000b 0o 0d 0x > [avision] [1] 00000000b 0o 0d 0x > [avision] [2] 00000010b 2o 2d 2x > [avision] [3] 01000000b 100o 64d 40x > [avision] get_accessories_info: Waiting while ADF firmware resets... > [avision] wait_ready: sending TEST_UNIT_READY > [avision] filling command to have a length of 10, was: 6 > [avision] Timeouts: write: 30000, read: 15000, status: 15000 > [avision] try to write cmd, count: 10. > [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes > [sanei_usb] 000 00 00 00 00 00 00 00 00 00 > 00 .......... [sanei_usb] sanei_usb_write_bulk: > wanted 10 bytes, wrote 10 bytes [avision] wrote 10 bytes > [avision] avision_usb_status: timeout 15000, 1 retries > [avision] ==> (bulk read) going down ... > [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes > [sanei_usb] 000 > 00 . [sanei_usb] > sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk > read) got: 1, status: 0 [avision] get_accessories_info: Maximum retries > attempted, ADF unresponsive. [avision] sane_open: additional probe > failed: Operation not supported scanimage: open of device > avision:libusb:004:029 failed: Operation not supported [avision] > sane_exit: > > ############### DEBUG 27 lines scanimage -h -d avision:libusb:004:029 > ############### [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes > [sanei_usb] 000 > 00 . [sanei_usb] > sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk > read) got: 1, status: 0 [avision] adf_reset: raw data: > [avision] [0] 00000000b 0o 0d 0x > [avision] [1] 00000000b 0o 0d 0x > [avision] [2] 00000010b 2o 2d 2x > [avision] [3] 01000000b 100o 64d 40x > [avision] get_accessories_info: Waiting while ADF firmware resets... > [avision] wait_ready: sending TEST_UNIT_READY > [avision] filling command to have a length of 10, was: 6 > [avision] Timeouts: write: 30000, read: 15000, status: 15000 > [avision] try to write cmd, count: 10. > [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes > [sanei_usb] 000 00 00 00 00 00 00 00 00 00 > 00 .......... [sanei_usb] sanei_usb_write_bulk: > wanted 10 bytes, wrote 10 bytes [avision] wrote 10 bytes > [avision] avision_usb_status: timeout 15000, 1 retries > [avision] ==> (bulk read) going down ... > [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes > [sanei_usb] 000 > 00 . [sanei_usb] > sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk > read) got: 1, status: 0 [avision] get_accessories_info: Maximum retries > attempted, ADF unresponsive. [avision] sane_open: additional probe > failed: Operation not supported scanimage: open of device > avision:libusb:004:029 failed: Operation not supported -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
