Hi Anthony, Your scanner Canon ImageClass D530 is fully supportet by Sane's Development (git) Version: http://sane-project.org/lists/sane-backends-cvs.html#S-PIXMA . You don't need to patch anything!
Please install Sane from git as described in README.linux: http://sane-project.org/docs.html . If you're using Ubuntu or an Ubuntu clone you can use my ppa: https://launchpad.net/~rolfbensch/+archive/ubuntu/sane-git . Hope this helps. Cheers, Rolf Am 12.07.2015 um 04:04 schrieb kingogames: > Hey there, > > I have been trying ALL day to get my Canon ImageClass D530 to work all day > using your walkthrough, and I just can't do it. I think I'm close, but for > some reeason, I'm doing something wrong. I am just at a loss. I don't know > what else to do. > > Can anyone help be get this working? > > Running sane-find-scanner returns: > > /found USB scanner (vendor=0x0bda, product=0x0129) at libusb:002:004 > found USB scanner (vendor=0x04a9 [Canon Inc], product=0x2775 [D530/D560]) at > libusb:002:003/ > > Why are there two scanners listed? I'm sure it was because I've been messing > with this all day and changed some setting... Could that be part of the > problem? > > Running (and sudo) scanimage -L returns: > > /No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages)./ > > I downloaded your *pixma_imageclass.c.patch4_all* but when I go to patch > pixma_imageclass.c, I get the following: > > /(Stripping trailing CRs from patch; use --binary to disable.) > patching file pixma_imageclass.c > Hunk #1 FAILED at 94. > Hunk #2 succeeded at 426 (offset 14 lines). > Hunk #3 succeeded at 485 (offset 14 lines). > Hunk #4 succeeded at 581 (offset 16 lines). > Hunk #5 FAILED at 789. > 2 out of 5 hunks FAILED -- saving rejects to file pixma_imageclass.c.rej/ > > lsusb returns: > / > Bus 002 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card > Reader Controller > Bus 002 Device 003: ID 04a9:2775 Canon, Inc. > Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 001 Device 004: ID 1bcf:2c00 Sunplus Innovation Technology Inc. > Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver > Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub/ > > lsusb -v -d 04a9:2775 returns: > > /Bus 002 Device 003: ID 04a9:2775 Canon, Inc. > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x04a9 Canon, Inc. > idProduct 0x2775 > bcdDevice 1.00 > iManufacturer 1 Canon Inc > iProduct 2 D530/D560 > iSerial 3 114753601448 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 62 > bNumInterfaces 2 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xc0 > Self Powered > MaxPower 2mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 3 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 0 > bInterfaceProtocol 255 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x03 EP 3 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 11 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x84 EP 4 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x85 EP 5 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 11 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 1 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 7 Printer > bInterfaceSubClass 1 Printer > bInterfaceProtocol 2 Bidirectional > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x01 EP 1 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 255 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x82 EP 2 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 255 > Device Qualifier (for other device speed): > bLength 10 > bDescriptorType 6 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > bNumConfigurations 1 > Device Status: 0x0001 > Self Powered/ > > > Thank you, > > Anthony > > > > > > > > > -- > View this message in context: > http://sane.10972.n7.nabble.com/Imageclass-d530-tp18191p19920.html > Sent from the SANE - Dev mailing list archive at Nabble.com. > > -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
