I got pass the not starting problem. This machine has to be put into "remote scanner" mode at the actual device.
When I try to scan now it just hangs on me and the display on the device says "An error has occured" and the following appears in my /var/log/messages. I have also attached the usblyzer html output as requested. Dec 11 13:47:07 r2d2 kernel: [ 661.651208] usb 2-1: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1 Dec 11 13:47:15 r2d2 kernel: [ 670.385064] usb 2-1: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1 Dec 11 13:47:16 r2d2 kernel: [ 670.913699] usb 2-1: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1 Dec 11 13:47:19 r2d2 kernel: [ 674.327016] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling... Dec 11 13:47:19 r2d2 kernel: [ 674.330553] usb 2-1: USB disconnect, device number 2 Dec 11 13:47:19 r2d2 kernel: [ 674.341357] usblp0: removed Dec 11 13:47:19 r2d2 colord: device removed: sysfs-Canon_Inc-D530_D560 Dec 11 13:47:19 r2d2 systemd[1]: Service printer.target is not needed anymore. Stopping. Dec 11 13:47:19 r2d2 systemd[1]: Stopping Printer. Dec 11 13:47:19 r2d2 systemd[1]: Stopped target Printer. Dec 11 13:47:20 r2d2 kernel: [ 674.559025] usb 2-1: new high-speed USB device number 3 using ehci-pci Dec 11 13:47:20 r2d2 kernel: [ 674.684038] usb 2-1: New USB device found, idVendor=04a9, idProduct=2775 Dec 11 13:47:20 r2d2 kernel: [ 674.687474] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dec 11 13:47:20 r2d2 kernel: [ 674.690815] usb 2-1: Product: D530/D560 Dec 11 13:47:20 r2d2 kernel: [ 674.694190] usb 2-1: Manufacturer: Canon Inc Dec 11 13:47:20 r2d2 kernel: [ 674.697478] usb 2-1: SerialNumber: 1131T3600452 Dec 11 13:47:20 r2d2 kernel: [ 674.719116] usblp 2-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x2775 Dec 11 13:47:20 r2d2 mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1" Dec 11 13:47:20 r2d2 mtp-probe: bus: 2, device: 3 was not an MTP device Dec 11 13:47:20 r2d2 colord: Device added: sysfs-Canon_Inc-D530_D560 Dec 11 13:47:20 r2d2 systemd[1]: Starting Printer. Dec 11 13:47:20 r2d2 systemd[1]: Reached target Printer. Dec 11 13:47:20 r2d2 systemd[1]: Starting Configure Plugged-In Printer... Dec 11 13:47:20 r2d2 systemd[1]: Started Configure Plugged-In Printer. Dec 11 13:47:21 r2d2 udev-configure-printer: no corresponding CUPS device found -- Nate Fuhriman Utah Preparation http://www.utahpreparation.com cell 801-787-3405 office 888-551-0338 On Wed, Dec 11, 2013 at 05:28:07PM +0100, Rolf Bensch wrote: > Hi Nate, > > Your scanner sticks at early scan beginning where I haven't seen > problems before. > > If possible please sniff the usb protocols of a small color scan (5mm x > 5mm) @ 75 dpi on a Windows machine or virtual machine. You can use > USBLyzer (export as html) or Wireshark or > http://benoit.papillault.free.fr/usbsnoop/. > > Cheers, > Rolf > > > Am 09.12.2013 19:11, schrieb Nate Fuhriman: > > Attached. > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20131211/8270c26c/attachment-0001.html>
