> Chances are, you have two copies of sane installed, and the config > files for one of the copies are messed up. Try enabling debugging on > the the DLL backend, and see where it is trying to load files from: > > SANE_DEBUG_DLL=255 scanimage -L
it looks like it loads them fine, but I think I discovered the difference with my (working) test setup: it was 32bit, while my main machine is 64bit. Yes I still have the distro sane installed, but I did this sideloading already in the past without issues (on a 32bit machine I admit) I changed the build number to be 100% sure it loads the correct epjitsu backend. I also found that sane actually still works with my other scanner, it just takes a long time to run scanimage, regardless if the S1300i is connected. So, two questions remain: - anything special I need to do on a 64bit system (debian based) - did you check on a 64bit system? Maybe a backend issue after all? For the reference, this is the (shortened) output (BUILD defined as 99 as an extra check): $ SANE_DEBUG_DLL=255 scanimage -L [sanei_debug] Setting debug level of dll to 255. [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.25git [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [dll] sane_init/read_dlld: attempting to open directory `/usr/local/etc/sane.d/dll.d' [dll] sane_init/read_dlld: using config directory `/usr/local/etc/sane.d/dll.d' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf ... [dll] add_backend: adding backend `epjitsu' ... [dll] sane_get_devices ... [dll] load: searching backend `epjitsu' in `/usr/local/lib/sane' [dll] load: trying to load `/usr/local/lib/sane/libsane-epjitsu.so.1' [dll] load: dlopen()ing `/usr/local/lib/sane/libsane-epjitsu.so.1' [dll] init: initializing backend `epjitsu' [dll] init: backend `epjitsu' is version 1.0.99 ... [dll] sane_get_devices: found 0 devices No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [dll] sane_exit: exiting ... [dll] sane_exit: calling backend `epjitsu's exit function ... [dll] sane_exit: finished -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
