Le dimanche 10 janvier 2010 06:15:35 Matt Perry, vous avez ?crit :
> I tried to report this via the page at
> http://www.meier-geinitz.de/tinc?key=rDoQ7lrj&formname=adddev but
> received an error after submitting the information. So I'm posting it
> here. If you need to follow up with me, do it off list as I'm
> unsubscribing after I send this email.
>
> Manufacturer: Visioneer
> Model name: RoadWarrior 120
> Bus type: USB
> Vendor ID: 0x04A7
> Product ID: 0x0494
> Chipset: GL842 (confirmed by opening scanner and making visual
> inspection of chip)
>
> Output of "sane-find-scanner -v -v":
>
> This is sane-find-scanner from sane-backends 1.0.20
>
...
> <device descriptor of 0x04a7/0x0494 at 002:003 (Visioneer Visioneer
> RoadWarrior)>
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 255
> bDeviceSubClass 255
> bDeviceProtocol 255
> bMaxPacketSize0 64
> idVendor 0x04A7
> idProduct 0x0494
> bcdDevice 3.02
> iManufacturer 10 (Visioneer)
> iProduct 11 (Visioneer RoadWarrior)
> iSerialNumber 12 (120)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 39
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 160 (Remote Wakeup)
> MaxPower 500 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255
> bInterfaceSubClass 255
> bInterfaceProtocol 255
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 (out 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 2>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 (in 0x03)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 1
> bInterval 8 ms
> bRefresh 0
> bSynchAddress 0
>
> <trying to find out which USB chip is used>
> checking for GT-6801 ...
> this is not a GT-6801 (bcdUSB = 0x200)
> checking for GT-6816 ...
> this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
> checking for GT-8911 ...
> this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass =
> 255) checking for MA-1017 ...
> this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
> checking for MA-1015 ...
> this is not a MA-1015 (bcdUSB = 0x200)
> checking for MA-1509 ...
> this is not a MA-1509 (bcdUSB = 0x200)
> checking for LM983[1,2,3] ...
> this is not a LM983x (bcdUSB = 0x200)
> checking for GL646 ...
> this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
> checking for GL646_HP ...
> this is not a GL646_HP (bcdUSB = 0x200)
> checking for GL660+GL646 ...
> this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass = 255)
> checking for GL84x ...
> <This USB chip looks like a GL841 (result from sane-backends 1.0.20)>
>
> found USB scanner (vendor=0x04a7 [Visioneer], product=0x0494
> [Visioneer RoadWarrior], chip=GL841) at libusb:002:003
>
Hello,
your scanner is supported by the development version of SANE. By
compiling
and installing it, you would be able to use it.
Regards,
Stef
