Is the scanner head locked? allan
On Sun, Jan 25, 2009 at 4:19 PM, Tobias Preclik <sane at tobias.preclik.de> wrote: > Hello devs, > > I just tried to configure my CanoScan LiDE 60 scanner with linux. I > installed sane-1.0.19 with the genesys backend and libusb support > enabled. The scanner is detected with sane-find-scanner and scanimage -L > also lists it (also as a user). In other words it should work. However > scanning does not work: The light flashes for an instant and the > scanning head quivers for an instant but then the following message is > reported: > > $ scanimage > test.pnm > [genesys_gl841] ********************************************** > [genesys_gl841] ********************************************** > [genesys_gl841] **** **** > [genesys_gl841] **** Extremely low Brightness detected. **** > [genesys_gl841] **** Check the scanning head is **** > [genesys_gl841] **** unlocked and moving. **** > [genesys_gl841] **** **** > [genesys_gl841] ********************************************** > [genesys_gl841] ********************************************** > scanimage: sane_start: Document feeder jammed > > I'm not sure if it helps but I appended some dll debug output. Any Ideas > what is going wrong? Please let me know if you need more debugging > information. > > regards, > Tobias > > [dll] sane_get_devices: found 1 devices > [dll] sane_open: trying to open `genesys:libusb:001:014' > [dll] sane_open: open successful > [dll] > sane_control_option(handle=0x60f870,option=0,action=0,value=0x7fff4df6daa8,info=(nil)) > [dll] > sane_control_option(handle=0x60f870,option=0,action=0,value=0x7fff4df6c9ac,info=(nil)) > [dll] sane_get_option_descriptor(handle=0x60f870,option=0) > [dll] sane_get_option_descriptor(handle=0x60f870,option=1) > [dll] sane_get_option_descriptor(handle=0x60f870,option=2) > [dll] sane_get_option_descriptor(handle=0x60f870,option=3) > [dll] sane_get_option_descriptor(handle=0x60f870,option=4) > [dll] sane_get_option_descriptor(handle=0x60f870,option=5) > [dll] sane_get_option_descriptor(handle=0x60f870,option=6) > [dll] sane_get_option_descriptor(handle=0x60f870,option=7) > [dll] sane_get_option_descriptor(handle=0x60f870,option=8) > [dll] sane_get_option_descriptor(handle=0x60f870,option=9) > [dll] sane_get_option_descriptor(handle=0x60f870,option=10) > [dll] > sane_control_option(handle=0x60f870,option=10,action=0,value=0x60a5e0,info=(nil)) > [dll] sane_get_option_descriptor(handle=0x60f870,option=11) > [dll] > sane_control_option(handle=0x60f870,option=11,action=0,value=0x60a5e4,info=(nil)) > [dll] sane_get_option_descriptor(handle=0x60f870,option=12) > [dll] sane_get_option_descriptor(handle=0x60f870,option=13) > [dll] sane_get_option_descriptor(handle=0x60f870,option=14) > [dll] sane_get_option_descriptor(handle=0x60f870,option=15) > [dll] sane_get_option_descriptor(handle=0x60f870,option=16) > [dll] > sane_control_option(handle=0x60f870,option=8,action=0,value=0x7fff4df6c9a8,info=(nil)) > [dll] > sane_control_option(handle=0x60f870,option=9,action=0,value=0x7fff4df6c9a8,info=(nil)) > [dll] > sane_control_option(handle=0x60f870,option=8,action=0,value=0x7fff4df6da9c,info=(nil)) > [dll] sane_get_option_descriptor(handle=0x60f870,option=10) > [dll] > sane_control_option(handle=0x60f870,option=10,action=1,value=0x7fff4df6daa0,info=0x7fff4df6c99c) > [dll] > sane_control_option(handle=0x60f870,option=9,action=0,value=0x7fff4df6da9c,info=(nil)) > [dll] sane_get_option_descriptor(handle=0x60f870,option=11) > [dll] > sane_control_option(handle=0x60f870,option=11,action=1,value=0x7fff4df6daa0,info=0x7fff4df6c99c) > [dll] sane_start(handle=0x60f870) > [genesys_gl841] ********************************************** > [genesys_gl841] ********************************************** > [genesys_gl841] **** **** > [genesys_gl841] **** Extremely low Brightness detected. **** > [genesys_gl841] **** Check the scanning head is **** > [genesys_gl841] **** unlocked and moving. **** > [genesys_gl841] **** **** > [genesys_gl841] ********************************************** > [genesys_gl841] ********************************************** > scanimage: sane_start: Document feeder jammed > [dll] sane_cancel(handle=0x60f870) > [dll] sane_close(handle=0x60f870) > [dll] sane_exit: exiting > [dll] sane_exit: calling backend `genesys's exit function > [dll] sane_exit: finished > > -- > sane-devel mailing list: sane-devel at lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > to sane-devel-request at lists.alioth.debian.org > -- "The truth is an offense, but not a sin"
