On Thu, 2007-07-05 at 01:46 +0200, cgi-mailer at kundenserver.de wrote: > > =========================================== > == Neuer Eintrag > =========================================== > > > ------------------------------------------- > -- Formular: 'adddev' > ------------------------------------------- > > 1. Your email address: > 'ppradier at videotron.ca' > 2. Manufacturer (e.g. "Mustek"): > 'Microtek' > 3. Model name (e.g. ScanExpress 1200UB): > 'ScanMaker S400' > 4. Bus type: > 'USB' > 5. Vendor id (e.g. 0x001): > '05da' > 6. Product id (e.g. 0x0002): > '300b' > 7. Chipset (e.g. lm9831): > 'SQ113-A3, (2nd line: 0428-1505), (3rd line: D189Q-010) or NYnix 438U' > 8. Comments (e.g. similar to Mustek 1234): > 'If you provide me an FTP or Email address I could forward you close shots > of the scanner's board. > > The board as 2 main chips, I am not sure wich one is the chipset. The larger > one as bus connector on the 4 sides shows SQ113-A3 the smaller of the 2 as > bus connector on 2 sides only as the marking NYnyx 438U (2nd line: > HY57V161610ET-7). > > Hoping that this is helpfull. > > Thank you' > 9. Data (e.g. sane-find-scanner -v -v): > 'cat /proc/bus/usb/devices : > > T: Bus=05 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=05da ProdID=300b Rev= 1.00 > S: Manufacturer=Prolific Technology Inc. > S: Product=USB Scanner > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=500us > ' > >
did you check the mustek_usb2 backend? (SQ113 support) For information see (http://www.meier-geinitz.de/sane/mustek_usb2-backend/ Maybe with some patches your scanner is identified, for a working scanner i expect more patches are needed and you should be carefull not to damage your scanner. -- -------- m.vr.gr. Gerard Klaver
