===========================================
== Neuer Eintrag
===========================================
-------------------------------------------
-- Formular: 'adddev'
-------------------------------------------
1. Your email address:
'db_lobster at gmail.com'
2. Manufacturer (e.g. "Mustek"):
'Microtek'
3. Model name (e.g. ScanExpress 1200UB):
'ScanMaker 3860'
4. Bus type:
'USB'
5. Vendor id (e.g. 0x001):
'05da'
6. Product id (e.g. 0x0002):
'3023'
7. Chipset (e.g. lm9831):
'SQ113'
8. Comments (e.g. similar to Mustek 1234):
'similar to Microtek ScanMaker 3880
back model MRS-2400U2
Chipset SQ113-A3.1'
9. Data (e.g. sane-find-scanner -v -v):
'$ sane-config --version
1.0.18
$ sane-find-scanner -v -v
trying libusb:
<device descriptor of 0x05da/0x3023 at 002:008>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x05DA
idProduct 0x3023
bcdDevice 1.00
iManufacturer 1 ((null))
iProduct 2 ((null))
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 100 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 (out 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 3 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bDeviceClass = 0)
checking for GT-6816 ...
this is not a GT-6816 (bcdUSB = 0x200)
checking for GT-8911 ...
this is not a GT-8911 (check 2, bcdUSB = 0x200)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bDeviceClass = 0)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceClass = 0)
checking for LM983[1,2,3] ...
this is not a LM983x (bcdUSB = 0x200)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL646_HP ...
this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL841 ...
this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
checking for ICM532B ...
this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
checking for PV8630/LM9830 ...
this is not a PV8630/LM9830 (bcdUSB = 0x200)
checking for M011 ...
this is not a M011 (bDeviceClass = 0)
checking for RTS8822L-01H ...
this is not a RTS8822L-01H (bEndpointAddress = 0x1, bmAttributes = 0x2,
wMaxPacketSize = 0x200, bInterval = 0x0)
checking for rts8858c ...
this is not a rts8858c (bcdUSB = 0x200)
checking for SQ113 ...
Couldn't set configuration: could not set config 1: Operation not permitted
<This USB chip looks like a SQ113? (result from sane-backends 1.0.18)>
found USB scanner (vendor=0x05da, product=0x3023, chip=SQ113?) at libusb:002:008
$ lsusb -v -v
Bus 002 Device 008: ID 05da:3023 Microtek International, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x05da Microtek International, Inc.
idProduct 0x3023
bcdDevice 1.00
iManufacturer 1 Prolific Technology Inc.
iProduct 2 USB Scanner
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 3
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
'
