On Tue, 13 Feb 2007 01:38:21 +1100 Russell Davie <russellda...@yahoo.com.au> wrote:
> > > Hi > > > > I downloaded the sane-backends-1.0.18.tar.gz and compiled from source and > > installed via check-install. > > > > This did two successful scans then stopped and made griding noises. This > > seems to be a problem with the more recent Ubuntu/Dapper which seems to > > have been solved in the previous version Ubuntu/Breezy and is reflected in > > the Ubuntu forums. So I'm not sure what to do new, short of downgrading > > the whole machine! > > > > regards > > > > Russell > > Its OK now, the scanner is now working after removing the sane package from > Dapper and leaving the compiled sane-backends. > It also works in Breezy via a chroot. > It has happily scanned many pages without a problem. > I have attached a html tableing the differences in the package versions. > > cheers > > Russell Hi this scanner is back to grinding and grunting while stationary. This is with the new sane-backends 1.0.18-1. It is much better behaved in Breezy via a chroot, but it will only run for the root user. Better than no scanner! this is the output from the xterm. Scanner stopped at line: [plustek] MCLK_FFW = 6 --> 0x0a I then manually canceled the scanner and pulled the usb cable out. $ export SANE_DEBUG_PLUSTEK=20 ; xsane . . [plustek] Data is available [plustek] usbDev_ScanEnd(), start=1, park=0 [plustek] PhyBytes = 10202 [plustek] PhyPixels = 5100 [plustek] MAX(G)= 0xdabc(55996) [plustek] REG[0x3b] = 10 [plustek] REG[0x3c] = 10 [plustek] REG[0x3d] = 10 [plustek] cano_AdjustGain() done. [plustek] ###### ADJUST DARK (FINE) ######## [plustek] MotorDPI=1200, MaxMotorSpeed=0.860, FFStepSize=242 [plustek] MOTOR: PWM=0x08, PWM_DUTY=0x1f 0x45=0x13 0x48=0x00, 0x49=0xf2 [plustek] MCLK_FFW = 6 --> 0x0a [plustek] MotorDPI=1200, MaxMoveSpeed=0.243, FFStepSize=857, Steps=40 [plustek] MOTOR: PWM=0x08, PWM_DUTY=0x1f 0x45=0x13 0x48=0x03, 0x49=0x59 [plustek] MCLK_FFW = 6 --> 0x0a [plustek] cano_AdjustDarkShading() [plustek] usb_SetScanParameters() [plustek] * HDPI: 4.000 [plustek] * XDPI=150, HDPI=4.000 [plustek] * YDPI=600, MinDPIY=75 [plustek] * DataPixelStart=307, LineEnd=4307 [plustek] * DataPixelStart=308, LineEnd=4308 (ADJ) [plustek] >> End-Start=4000, HDPI=4.00 [plustek] * Full Steps to Skip at Start = 0x0000 [plustek] * StepSize(Preset) = 121 (0x0079) [plustek] * Scan calculations... [plustek] * LineLength=6080, LineRateColor=1 [plustek] * Stepsize = 762, 0x46=0x02 0x47=0xfa [plustek] * DPD =384 (0x0180) [plustek] * DPD =5696 (0x1640), step size=762, steps2rev=0 [plustek] * llen=6080, lineRateColor=1, qtcnt=8, hfcnt=8 [plustek] usb_GetMCLKDivider() [plustek] * Integration Time Adjust = 0 (HDPI=4.000,MCLKD=12.000) [plustek] * Setting GreenPWMDutyCycleHigh [plustek] * Current MCLK Divider = 12.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x1f [plustek] * CIS FFStep-Speedup [plustek] * FFStepSize = 142, [0x48] = 0x00, [0x49] = 0x8e [plustek] * PhyBytes = 2002 [plustek] * PhyLines = 32 [plustek] * TotalBytes = 64064 [plustek] * PL=318, coeffsize=192, scaler=1 [plustek] * PauseLimit = 63, [0x4e] = 0x1d, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] usb_ScanBegin() [plustek] usb_DownloadShadingData(2) [plustek] Register Dump before reading data: [plustek] 0x00: XX 00 62 00 01 XX XX 03 16 24 00 15 4c 2f 00 00 [plustek] 0x10: 00 04 05 06 07 00 00 00 05 00 00 01 00 00 00 00 [plustek] 0x20: 17 ba 01 34 10 d4 14 00 03 03 00 00 00 00 00 00 [plustek] 0x30: 00 17 02 1b 00 00 00 00 00 00 00 0a 0a 0a 00 00 [plustek] 0x40: 40 00 20 00 00 13 02 fa 00 8e 00 00 00 00 1d 01 [plustek] 0x50: 00 fc 16 40 00 0f 08 1f 00 66 16 91 01 00 00 00 [plustek] 0x60: 50 7e 2b f1 10 44 10 80 00 04 00 00 d0 00 00 00 [plustek] 0x70: 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 [plustek] >>> INCH=0, DOY=90 [plustek] usb_ScanBegin() done. [plustek] usb_IsDataAvailableInDRAM() [plustek] Data is available [plustek] usbDev_ScanEnd(), start=1, park=0 [plustek] Color[0] (Dark): 1000 pixels min=1599(471) max=2926(697)ave=1877 [plustek] 5%: low@1783 (count=275), upper@1970 (count=152) [plustek] cano_AdjustDarkShading() done [plustek] ###### ADJUST WHITE (FINE) ####### [plustek] MotorDPI=1200, MaxMotorSpeed=0.860, FFStepSize=242 [plustek] MOTOR: PWM=0x08, PWM_DUTY=0x1f 0x45=0x13 0x48=0x00, 0x49=0xf2 [plustek] MCLK_FFW = 6 --> 0x0a [plustek] sane_cancel [plustek] do_cancel [plustek] >>>>>>>> killing reader_process <<<<<<<< [plustek] UIO error [plustek] cano_PrepareToReadWhiteCal() failed [plustek] calibration failed!!! [plustek] SIGUSR1 is pending --> Cancel detected [plustek] readLine() - Cancel detected... [plustek] reader_process: read failed, status = -9004, errno 11 [plustek] (SIG) Child is down (signal=17) [plustek] reader_process killed [plustek] drvclose() [plustek] TIME END 1: 18s [plustek] usbDev_stopScan() [plustek] usbDev_ScanEnd(), start=1, park=1 [plustek] UIO error [plustek] UIO error [plustek] Lamp-Timer started (using ITIMER) [plustek] usbDev_close() [plustek] TIME END 2: 48s [plustek] IPC: Transferrate = 711862 Bytes/s [plustek] do_cancel [plustek] close_pipe (r_pipe) [plustek] sane_cancel Send instant messages to your online friends http://au.messenger.yahoo.com
