I did some more reading and found other people had problems with this. Especially in multi-function devices. Their solution was to comment out some code in the backend or remove a usb module from the kernel.
I did an lsmod and found hpusbscsi was loaded whenever I plugged in my Avision 220 scanner. I did a modeprob -r hpusbscsi and scanimage -L now returns with my scanner. But I still can't scan. When I do a scanimage, it waits for a long time and then times out. I get some read errors: " Value too large for defined data type" followed by some write errors. Any ideas on the module load problem or the timeouts would be greatly appreciated. Thanks, Kerry -----Original Message----- From: root [mailto:r...@cstest.rx30.com] Sent: Friday, June 30, 2006 11:16 AM To: kmen...@rx30.com Subject: Avision [dll] load: trying to load `/usr/local/lib/sane/libsane-net.so.1' [dll] load: dlopen()ing `/usr/local/lib/sane/libsane-net.so.1' [dll] init: initializing backend `net' [dll] init: backend `net' is version 1.0.17 [dll] sane_get_devices: found 1 devices [dll] sane_open: trying to open `avision:libusb:002:007' [avision] sane_open: [avision] attach: [avision] sane_open: using open_extended [sanei_usb] sanei_usb_open: trying to open device `libusb:002:007' [sanei_usb] sanei_usb_open: configuration nr: 0 [sanei_usb] sanei_usb_open: interface nr: 0 [sanei_usb] sanei_usb_open: alt_setting nr: 0 [sanei_usb] sanei_usb_open: endpoint nr: 0 [sanei_usb] sanei_usb_open: direction: 0 [sanei_usb] sanei_usb_open: address: 1 transfertype: 2 [sanei_usb] sanei_usb_open: found bulk-out endpoint (address 0x01) [sanei_usb] sanei_usb_open: we already have a bulk-out endpoint (address: 0x01), ignoring the new one [sanei_usb] sanei_usb_open: endpoint nr: 1 [sanei_usb] sanei_usb_open: direction: 128 [sanei_usb] sanei_usb_open: address: 2 transfertype: 3 [sanei_usb] sanei_usb_open: found interrupt-in endpoint (address 0x02) [sanei_usb] sanei_usb_open: we already have a int-in endpoint (address: 0x82), ignoring the new one [sanei_usb] sanei_usb_open: endpoint nr: 2 [sanei_usb] sanei_usb_open: direction: 128 [sanei_usb] sanei_usb_open: address: 3 transfertype: 2 [sanei_usb] sanei_usb_open: found bulk-in endpoint (address 0x03) [sanei_usb] sanei_usb_open: we already have a bulk-in endpoint (address: 0x83), ignoring the new one [sanei_usb] sanei_usb_open: opened usb device `libusb:002:007' (*dn=0) [avision] sane_open: got 1048576 scsi_max_request_size [avision] wait_ready: sending TEST_UNIT_READY [avision] filling command to have a length of 10, was: 6 [avision] try to write cmd, count: 10. [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes [sanei_usb] 0000: 00 00 00 00 00 00 00 00 00 00 ................ [sanei_usb] sanei_usb_write_bulk: wanted 10 bytes, wrote 10 bytes [avision] wrote 10 bytes [avision] avision_usb_status: timeout 2500, 1 retries [avision] ==> (bulk read) going down ... [sanei_usb] sanei_usb_read_bulk: trying to read 2 bytes USB error: error reading from bulk endpoint 0x83: Value too large for defined data type [sanei_usb] sanei_usb_read_bulk: read failed: Value too large for defined data type [avision] <== (bulk read) got: 0, status: 0 [avision] try to write cmd, count: 10. [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes [sanei_usb] 0000: 00 00 00 00 00 00 00 00 00 00 ................ [sanei_usb] sanei_usb_write_bulk: wanted 10 bytes, wrote 10 bytes [avision] wrote 10 bytes [avision] avision_usb_status: timeout 2500, 1 retries [avision] ==> (bulk read) going down ... [sanei_usb] sanei_usb_read_bulk: trying to read 2 bytes USB error: error reading from bulk endpoint 0x83: Value too large for defined data type [sanei_usb] sanei_usb_read_bulk: read failed: Value too large for defined data type [avision] <== (bulk read) got: 0, status: 0 [avision] try to write cmd, count: 10. [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes [sanei_usb] 0000: 00 00 00 00 00 00 00 00 00 00 ................ USB error: error writing to bulk endpoint 1: Connection timed out [sanei_usb] sanei_usb_write_bulk: write failed: Connection timed out [avision] wrote 0 bytes [avision] === Got error 9 trying to write, wrote: 0. === [avision] try to read status to clear the FIFO [avision] avision_usb_status: timeout 500, 1 retries [avision] ==> (bulk read) going down ... [sanei_usb] sanei_usb_read_bulk: trying to read 2 bytes USB error: error reading from bulk endpoint 0x83: Value too large for defined data type [sanei_usb] sanei_usb_read_bulk: read failed: Value too large for defined data type [avision] <== (bulk read) got: 0, status: 0 [avision] === Got error 9 trying to read status. === [avision] wait_ready: test unit ready failed (Error during device I/O) [avision] wait_ready: sending TEST_UNIT_READY [avision] filling command to have a length of 10, was: 6 [avision] try to write cmd, count: 10. [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes [sanei_usb] 0000: 00 00 00 00 00 00 00 00 00 00 ................ USB error: error writing to bulk endpoint 1: Connection timed out [sanei_usb] sanei_usb_write_bulk: write failed: Connection timed out [avision] wrote 0 bytes [avision] === Got error 9 trying to write, wrote: 0. === [avision] try to read status to clear the FIFO [avision] avision_usb_status: timeout 500, 1 retries [avision] ==> (bulk read) going down ... [sanei_usb] sanei_usb_read_bulk: trying to read 2 bytes USB error: error reading from bulk endpoint 0x83: Value too large for defined data type [sanei_usb] sanei_usb_read_bulk: read failed: Value too large for defined data type [avision] <== (bulk read) got: 0, status: 0 [avision] === Got error 9 trying to read status. === [avision] wait_ready: test unit ready failed (Error during device I/O) [avision] wait_ready: sending TEST_UNIT_READY [avision] filling command to have a length of 10, was: 6 [avision] try to write cmd, count: 10. [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes [sanei_usb] 0000: 00 00 00 00 00 00 00 00 00 00 ................ USB error: error writing to bulk endpoint 1: Connection timed out [sanei_usb] sanei_usb_write_bulk: write failed: Connection timed out [avision] wrote 0 bytes [avision] === Got error 9 trying to write, wrote: 0. === [avision] try to read status to clear the FIFO [avision] avision_usb_status: timeout 500, 1 retries [avision] ==> (bulk read) going down ... [sanei_usb] sanei_usb_read_bulk: trying to read 2 bytes USB error: error reading from bulk endpoint 0x83: Value too large for defined data type [sanei_usb] sanei_usb_read_bulk: read failed: Value too large for defined data type [avision] <== (bulk read) got: 0, status: 0 [avision] === Got error 9 trying to read status. === [avision] wait_ready: test unit ready failed (Error during device I/O) [avision] wait_ready: sending TEST_UNIT_READY [avision] filling command to have a length of 10, was: 6 [avision] try to write cmd, count: 10. [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes [sanei_usb] 0000: 00 00 00 00 00 00 00 00 00 00 ................ USB error: error writing to bulk endpoint 1: Connection timed out [sanei_usb] sanei_usb_write_bulk: write failed: Connection timed out [avision] wrote 0 bytes [avision] === Got error 9 trying to write, wrote: 0. === [avision] try to read status to clear the FIFO [avision] avision_usb_status: timeout 500, 1 retries [avision] ==> (bulk read) going down ... [sanei_usb] sanei_usb_read_bulk: trying to read 2 bytes USB error: error reading from bulk endpoint 0x83: Value too large for defined data type [sanei_usb] sanei_usb_read_bulk: read failed: Value too large for defined data type [avision] <== (bulk read) got: 0, status: 0 [avision] === Got error 9 trying to read status. === [avision] wait_ready: test unit ready failed (Error during device I/O) [avision] wait_ready: sending TEST_UNIT_READY [avision] filling command to have a length of 10, was: 6 [avision] try to write cmd, count: 10. [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes [sanei_usb] 0000: 00 00 00 00 00 00 00 00 00 00 ................
