El dom, 19-03-2006 a las 11:55, Oliver Schwartz escribi?: > The scanner stops responding after the firmware has been sent to the > scanner. The transfer itself seems to be fine. It's possible that > neither of the two firmware files is the correct one for your > scanner. What's the USB ID of your scanner (e.g. output from > "lsusb")?
[root@gerencia warren]# lsusb Bus 001 Device 001: ID 0000:0000 Bus 001 Device 002: ID 04a5:20fe Acer Peripherals Inc. (now BenQ Corp.) SW2 5300U The above appears to agree with the information on the sane-snapscan page, which gives the USB ID for the Acer/Benq 5300 as "0x04a5, 0x20fe" and identifies the firmware to use is u254v042.bin. Of course, the firmware file I have might be corrupt. I downloaded it from benq.com along with a raft of other firmware files, but there was no checksum to make sure that it downloaded correctly. Note that my scanner is a 5300U, and the sane-snapscan page only mentions 5300 (without the "U". I have been assuming that this is not significant, given that the USB IDs are the same. -- Warren Post Santa Rosa de Cop?n, Honduras http://srcopan.vze.com/
