Hello, I need a small scanner for scanning business cards and insurance cards.
I picked up a ScanShell 800N, but sadly, it doesn't appear to be supported by SANE. I've got the results of various tests and below. Does anybody have any pointers for one of the following: 1) Making this 800N work with an existing driver 2) A different scanner that is good for scanning business cards 3) Writing a new driver for the 800N Any help will be greatly appreciated, because I REALLY don't want to put windows boxes at this customer. Thanks, Jim McQuillan j...@ltsp.org "sane-find-scanner" reports: found USB scanner (vendor=0x0a82, product=0x6605, chip=LM983x?) at libusb:004:006 "scanimage -L" reports: No scanners were identified. "/proc/bus/usb/devices" shows this: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0a82 ProdID=6605 Rev= 1.00 S: Manufacturer=Card Scanning Solutions S: Product=CSSN-SCANSHELL 800N C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=16ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Results of "lsusb -v -v": Bus 004 Device 006: ID 0a82:6605 Syscan Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0a82 Syscan idProduct 0x6605 bcdDevice 1.00 iManufacturer 64 iProduct 113 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 16 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0