Hi Members, I'm have one machine all-in-one Lexmark x1195 or x1100 series, but I don't can scanning.
[root@IS-BUILDER ~]# sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # Also you need support for SCSI Generic (sg) in your operating system. # If using Linux, try "modprobe sg". found USB scanner (vendor=0x043d, product=0x007c) at libusb:002:003 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. [root@IS-BUILDER ~]# scanimage -L -d lexmark:libusb:002:003 No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). But, if I running "xsane lexmark:libusb:002:003" this front-end not execute preview scan, freeze application. [root@IS-BUILDER ~]# scanimage --version scanimage (sane-backends) 1.0.16-cvs; backend version 1.0.16 Any idea to my case ? Thank you developers. []'s Alexandre
