I'm trying to get a new fi-4120C2 working with sane under FreeBSD 6.0- RC1 or Mac OS X 10.4.2. Under BSD, scanimage -L recognizes the scanner and outputs: device `fujitsu:libusb:/dev/usb4:/dev/ugen0' is a FUJITSU fi-4120C2dj scanner
but when I try to scan something, e.g. scanimage -v >test, I get: scanimage: rounded value of br-x from 215 to 215.004 scanimage: rounded value of br-y from 297 to 296.994 then scanimage just sits there until I kill it. After that scanimage - L (and sane-find-scanner) can't find the scanner until I turn it off and on or unplug/plug the USB cable. Anyone know what could be going on? I've grabbed all the latest BSD ports (sane-backends-1.0.16_1, libusb-0.1.10a_1, etc.), but nothing changes from the previous version. The only uncommented line in /usr/local/etc/sane.d/fujitsu.conf is: usb 0x04c5 0x10ae These are the numbers I get back from sane-find-scanner. I get the same behavior when I hook the scanner up to my Mac running OS X 10.4.2, and use the latest software from www.ellert.se (backend 1.0.16, libusb 0.1.11, maciconv 1.2, etc.). Also, this scanner works fine using the vendor supplied software under Windows XP, so it doesn't seem to be a hardware problem. Darrell Styner darr...@avanta.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20051031/3ae07196/attachment.htm From an...@pfeiffer.edu Tue Nov 1 15:43:57 2005 From: an...@pfeiffer.edu (m. allan noah) Date: Tue Nov 1 16:08:34 2005 Subject: [sane-devel] Install problem with fi-4120C2 under FreeBSD and OS X 10.4.2 In-Reply-To: <39e2931a-8104-460d-8fcc-94c8c81a2...@avanta.com> References: <39e2931a-8104-460d-8fcc-94c8c81a2...@avanta.com> Message-ID: <pine.lnx.4.61.0511010955240.26...@limos.pfeiffer.edu> darrell- can you get a debug log? something like: SANE_DEBUG_FUJITSU=255 scanimage -v 2>debug.log > scan.pnm then zip up debug.log and send it to me off list. allan On Mon, 31 Oct 2005, Darrell Styner wrote: > I'm trying to get a new fi-4120C2 working with sane under FreeBSD 6.0-RC1 or > Mac OS X 10.4.2. Under BSD, scanimage -L recognizes the scanner and outputs: > device `fujitsu:libusb:/dev/usb4:/dev/ugen0' is a FUJITSU fi-4120C2dj scanner > > but when I try to scan something, e.g. scanimage -v >test, I get: > scanimage: rounded value of br-x from 215 to 215.004 > scanimage: rounded value of br-y from 297 to 296.994 > > then scanimage just sits there until I kill it. After that scanimage -L (and > sane-find-scanner) can't find the scanner until I turn it off and on or > unplug/plug the USB cable. Anyone know what could be going on? I've grabbed > all the latest BSD ports (sane-backends-1.0.16_1, libusb-0.1.10a_1, etc.), > but nothing changes from the previous version. > > The only uncommented line in /usr/local/etc/sane.d/fujitsu.conf is: > usb 0x04c5 0x10ae > These are the numbers I get back from sane-find-scanner. > > I get the same behavior when I hook the scanner up to my Mac running OS X > 10.4.2, and use the latest software from www.ellert.se (backend 1.0.16, > libusb 0.1.11, maciconv 1.2, etc.). Also, this scanner works fine using the > vendor supplied software under Windows XP, so it doesn't seem to be a > hardware problem. > > Darrell Styner > darr...@avanta.com > > -- "so don't tell us it can't be done, putting down what you don't know. money isn't our god, integrity will free our souls" - Max Cavalera
