On 10/30/05, Pierre Willenbrock <pie...@pirsoft.dnsalias.org> wrote: > Cameron Harris schrieb: > > > > Well... I checked out experimental, copied the experimental/genesys/* > > over to the backend/ directory, then make clean/make/make install... > > > > Gets slightly further in the scanning this time. > > > > # SANE_DEBUG_GENESYS=255 scanimage -d genesys > > outputs lots of stuff and my scanner's head moves a little bit, > > flashes a few different colours.. but then it gets to... > > > > [genesys] sanei_genesys_read_data_from_scanner (size = 1560000 bytes) > > [genesys] genesys_read_valid_words > > [genesys] sanei_genesys_read_register (0x44, 0x00) completed > > [genesys] sanei_genesys_read_register (0x43, 0x00) completed > > [genesys] sanei_genesys_read_register (0x42, 0x00) completed > > [genesys] genesys_read_valid_words: 0 words > > [genesys] genesys_read_valid_words > > [genesys] sanei_genesys_read_register (0x44, 0x84) completed > > [genesys] sanei_genesys_read_register (0x43, 0x2b) completed > > [genesys] sanei_genesys_read_register (0x42, 0x00) completed > > [genesys] genesys_read_valid_words: 11140 words > > > > Where it stops for about 30 seconds, then... > > > > [genesys] sanei_genesys_read_data_from_scanner: reading bulk data > > failed: Error during device I/O > > [genesys] genesys_black_white_shading_calibration: Failed to read > > data: Error during device I/O > > [genesys] genesys_flatbed_calibration: failed to do dark+white shading > > calibration: Error during device I/O > > [genesys] genesys_start_scan: failed to do flatbed calibration: Error > > during device I/O > > scanimage: sane_start: Error during device I/O > > [genesys] sane_cancel: start > > > > Any ideas? > > > > Thanks :) > > > Does it always stop there? It looks like the usb connection somehow > broke while transfering data. Does the scanner re-register with your > system at the moment the transmission stops? There will be some kernel > messages about a new usb device in that case. > >
Yeah it always stops there, nothing in dmesg about it. -- Cameron Harris
