On Wednesday 09 February 2005 13:39, Vitaly Lipatov wrote: > I try to get work Benq 5000 scanner, but it does not work: > # scanimage -L > device `snapscan:libusb:001:002' is a Acer FlatbedScanner22 > flatbed scanner > [root@server tmp]# scanimage >some.out > [snapscan] Scanner warming up - waiting 32 seconds. > scanimage: open of device snapscan:libusb:001:002 failed: Error > during device I/O > > It turn on lamp and moving for two seconds, after it failed with > the error. > > I use firmware 20F8v115.bin from CD. > > Info from proc: > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 12 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1 > P: Vendor=04a5 ProdID=20f8 Rev= 1.20 > S: Manufacturer=Color > S: Product= FlatbedScanner 22 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff > Driver=usbscanner > Guess you should unload the scanner module... Are you using 2.4 kernel or a early 2.6? Blacklist the scanner module...
Gerhard
