I try to get work Benq 5000 scanner, but it does not work: # scanimage -L device `snapscan:libusb:001:002' is a Acer FlatbedScanner22 flatbed scanner [root@server tmp]# scanimage >some.out [snapscan] Scanner warming up - waiting 32 seconds. scanimage: open of device snapscan:libusb:001:002 failed: Error during device I/O
It turn on lamp and moving for two seconds, after it failed with the error. I use firmware 20F8v115.bin from CD. Info from proc: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 12 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1 P: Vendor=04a5 ProdID=20f8 Rev= 1.20 S: Manufacturer=Color S: Product= FlatbedScanner 22 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbscanner It look not the same as Benq 5000 from snapscan module table. Any suggestions? Will I try use newest kernel or motherboard chipset? -- Lav Vitaly Lipatov Saint-Petersburg GNU! ALT Linux Team! LaTeX! LyX! -- Lav Vitaly Lipatov Russia, Saint-Petersburg GNU! ALT Linux Team! LaTeX! LyX!
