Yesterday I downloaded the current snapshot (to solve OS X compilation errors in 1.0.13) and built it. I also compiled and installed the latest libusb (0.1.8). When I try the scanimage command the scanner make some strange noise =:-/ and then the program hangs... It seems like a problem with Canon scanners I once read in this ML but that was long ago and I think it was solved...
Anyone can help me? Thank You!!! Gianfranco XS206:~ onizuka$ scanimage > test.pnm [sanei_debug] Setting debug level of plustek to 10. [plustek] Plustek backend V0.47-10, part of sane-backends 1.0.13-cvs [plustek] ># Plustek-SANE Backend configuration file< [plustek] ># For use with LM9831/2/3 based USB scanners< [plustek] >#< [plustek] >< [plustek] ># each device needs at least two lines:< [plustek] ># - [usb] vendor-ID and product-ID< [plustek] ># - device devicename< [plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)< [plustek] ># [usb] 0x07B3 0x0017< [plustek] ># device /dev/usbscanner< [plustek] ># or< [plustek] ># device libusb:bbb:ddd< [plustek] ># where bbb is the busnumber and ddd the device number< [plustek] ># make sure that your user has access to /proc/bus/usb/bbb/ddd< [plustek] >#< [plustek] ># additionally you can specify some options< [plustek] ># warmup, lOffOnEnd, lampOff< [plustek] >#< [plustek] ># For autodetection use< [plustek] ># [usb]< [plustek] ># device /dev/usbscanner< [plustek] >#< [plustek] ># or simply< [plustek] ># [usb]< [plustek] >#< [plustek] ># or if you want a specific device but you have no idea about the< [plustek] ># device node or you use libusb, simply set vendor- and product-ID< [plustek] ># [usb] 0x07B3 0x0017< [plustek] ># device auto< [plustek] >#< [plustek] ># NOTE: autodetection is safe, as it uses the info it got< [plustek] ># from the USB subsystem. If you're not using the< [plustek] ># autodetection, you MUST have attached that device< [plustek] ># at your USB-port, that you have specified...< [plustek] >#< [plustek] >< [plustek] >[usb] 0x04A9 0x2206< [plustek] next device is a USB device (0x04A9-0x2206) [plustek] ... next device [plustek] >device auto< [plustek] Decoding device name >auto< [plustek] >< [plustek] >#< [plustek] ># options for the previous USB entry< [plustek] >#< [plustek] ># switch lamp off after xxx secs, 0 disables the feature< [plustek] >option lampOff 300< [plustek] Decoding option >lampOff< [plustek] >< [plustek] ># warmup period in seconds, 0 means no warmup< [plustek] >option warmup 15< [plustek] Decoding option >warmup< [plustek] >< [plustek] ># 0 means leave lamp-status untouched, not 0 means switch off< [plustek] ># on sane_close< [plustek] >option lOffOnEnd 1< [plustek] Decoding option >lOffOnEnd< [plustek] >< [plustek] >#< [plustek] ># options to tweak the image start-position< [plustek] ># (WARNING: there's no internal range check!!!)< [plustek] >#< [plustek] ># for the normal scan area< [plustek] >#< [plustek] >option posOffX 0< [plustek] Decoding option >posOffX< [plustek] >option posOffY 0< [plustek] Decoding option >posOffY< [plustek] >< [plustek] ># for transparencies< [plustek] >option tpaOffX 0< [plustek] Decoding option >tpaOffX< [plustek] >option tpaOffY 0< [plustek] Decoding option >tpaOffY< [plustek] >< [plustek] ># for negatives< [plustek] >option negOffX 0< [plustek] Decoding option >negOffX< [plustek] >option negOffY 0< [plustek] Decoding option >negOffY< [plustek] >< [plustek] >#< [plustek] ># for setting the calibration strip position< [plustek] ># (WARNING: there's no internal range check!!!)< [plustek] ># -1 means use built in< [plustek] >#< [plustek] >option posShadingY -1< [plustek] Decoding option >posShadingY< [plustek] >option tpaShadingY -1< [plustek] Decoding option >tpaShadingY< [plustek] >option negShadingY -1< [plustek] Decoding option >negShadingY< [plustek] >< [plustek] >#< [plustek] ># to invert the negatives, 0 disables the feature< [plustek] >#< [plustek] >option invertNegatives 0< [plustek] Decoding option >invertNegatives< [plustek] >< [plustek] >#< [plustek] ># to save/restore coarse calibration data< [plustek] >#< [plustek] >option cacheCalData 0< [plustek] Decoding option >cacheCalData< [plustek] >< [plustek] >#< [plustek] ># use alternate calibration routines< [plustek] >#< [plustek] >option altCalibration 0< [plustek] Decoding option >altCalibration< [plustek] >< [plustek] >#< [plustek] ># for skipping whole calibration step< [plustek] >#< [plustek] >option skipCalibration 0< [plustek] Decoding option >skipCalibration< [plustek] >< [plustek] >#< [plustek] ># for skipping entire fine calibration step< [plustek] ># coarse calibration is done< [plustek] >#< [plustek] >option skipFine 0< [plustek] Decoding option >skipFine< [plustek] >< [plustek] >#< [plustek] ># discard the result of the fine white calibration< [plustek] >#< [plustek] >option skipFineWhite 0< [plustek] Decoding option >skipFineWhite< [plustek] >< [plustek] ># for replacing the gain values found during< [plustek] ># calibration< [plustek] >option red_gain -1< [plustek] Decoding option >red_gain< [plustek] >option green_gain -1< [plustek] Decoding option >green_gain< [plustek] >option blue_gain -1< [plustek] Decoding option >blue_gain< [plustek] >< [plustek] >#< [plustek] >#< [plustek] >option red_lampoff -1< [plustek] Decoding option >red_lampoff< [plustek] >option green_lampoff -1< [plustek] Decoding option >green_lampoff< [plustek] >option blue_lampoff -1< [plustek] Decoding option >blue_lampoff< [plustek] >< [plustek] >#< [plustek] ># for adjusting the default gamma values< [plustek] >#< [plustek] >option redGamma 1.0< [plustek] Decoding option >redGamma< [plustek] >option greenGamma 1.0< [plustek] Decoding option >greenGamma< [plustek] >option blueGamma 1.0< [plustek] Decoding option >blueGamma< [plustek] >option grayGamma 1.0< [plustek] Decoding option >grayGamma< [plustek] >< [plustek] >#< [plustek] ># to enable TPA (non Plustek devices only)< [plustek] ># 0 means default behaviour as specified in the internal tables< [plustek] ># 1 means enable< [plustek] >#< [plustek] >option enableTPA 0< [plustek] Decoding option >enableTPA< [plustek] >< [plustek] >#< [plustek] ># model override functionality, currently only available for< [plustek] ># Mustek devices, using NSCs' vendor ID: 0x0400 and< [plustek] ># also their product ID: 0x1000 (LM9831) 0x1001 (LM9832)< [plustek] >#< [plustek] ># mov/PID | 0x1000 | 0x1001< [plustek] ># ---------------------------------------< [plustek] ># 0 (default)| BearPaw1200 | BearPaw 2400< [plustek] ># 1 | ignored | BearPaw 1200< [plustek] >#< [plustek] >option mov 0< [plustek] Decoding option >mov< [plustek] >< [plustek] >#< [plustek] ># and of course the device-name< [plustek] >#< [plustek] ># device /dev/usbscanner< [plustek] >device auto< [plustek] Decoding device name >auto< [plustek] >< [plustek] >#< [plustek] ># to define a new device, start with a new section:< [plustek] ># [usb]< [plustek] >#< [plustek] attach (auto, 0xbffff290, 0x0) [plustek] Device configuration: [plustek] device name : >auto< [plustek] USB-ID : >0x04A9-0x2206< [plustek] model ovr. : 0 [plustek] warmup : 15s [plustek] lampOff : 300 [plustek] lampOffOnEnd : yes [plustek] cacheCalData : no [plustek] altCalibrate : no [plustek] skipCalibr. : no [plustek] skipFine : no [plustek] skipFineWhite: no [plustek] invertNegs. : no [plustek] pos_x : 0 [plustek] pos_y : 0 [plustek] pos_shading_y: -1 [plustek] neg_x : 0 [plustek] neg_y : 0 [plustek] neg_shading_y: -1 [plustek] tpa_x : 0 [plustek] tpa_y : 0 [plustek] tpa_shading_y: -1 [plustek] red gain : -1 [plustek] green gain : -1 [plustek] blue gain : -1 [plustek] red lampoff : -1 [plustek] green lampoff: -1 [plustek] blue lampoff : -1 [plustek] red Gamma : 1.00 [plustek] green Gamma : 1.00 [plustek] blue Gamma : 1.00 [plustek] gray Gamma : 1.00 [plustek] --------------------- [plustek] usbDev_open(auto,0x04A9-0x2206) [plustek] Found device at >libusb:001:002-04a9-2206-00-00< [plustek] Vendor ID=0x04A9, Product ID=0x2206 [plustek] usbio_DetectLM983x [plustek] usbio_DetectLM983x: found LM9832/3 [plustek] Detected vendor & product ID: 0x04A9-0x2206 [plustek] Device description for >0x04A9-0x2206< found. [plustek] usb_initDev(37,0x04a9,-1) [plustek] Device WAF: 0x00000006 [plustek] Vendor adjusted to: >Canon< [plustek] LAMP-STATUS: 0x00000000 [plustek] RESETTING REGISTERS(-1) [plustek] MISC I/O after RESET: 0x66, 0x16, 0x91 [plustek] Calibration file-name set to: [plustek] >/Users/onizuka/.sane/Canon-N650U_N656U.cal< [plustek] usb_SetScanParameters() [plustek] * HDPI: 4.000 [plustek] * XDPI=150, HDPI=4.000 [plustek] * DataPixelStart=89, LineEnd=89 [plustek] * DataPixelStart=90, LineEnd=90 (ADJ) [plustek] >> End-Start=0, HDPI=4.00 [plustek] * Full Steps to Skip at Start = 0x0000 [plustek] usb_GetMCLKDivider() [plustek] * Integration Time Adjust = 0 (HDPI=4.000,MCLKD=4.000) [plustek] * Current MCLK Divider = 4.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x1f [plustek] * PhyBytes = 6 [plustek] * PhyLines = 2147483651 [plustek] * TotalBytes = 54 [plustek] * PL=295, coeffsize=216, scaler=3 [plustek] * PauseLimit = 2, [0x4e] = 0x01, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] usbDev_getCaps() [plustek] Scanner information: [plustek] Vendor : Canon [plustek] Model : N650U/N656U [plustek] Flags : 0x00000000 [plustek] drvclose() [plustek] usbDev_stopScan() [plustek] usbDev_ScanEnd(), start=0, park=0 [plustek] usbDev_close() [plustek] attach: model = >N650U/N656U< [plustek] sane_get_devices (0xbffff810, 0) [plustek] sane_open - libusb:001:002-04a9-2206-00-00 [plustek] Presetting Gamma tables (len=4096) [plustek] * Channel[0], gamma 2.000 [plustek] * Channel[1], gamma 2.000 [plustek] * Channel[2], gamma 2.000 [plustek] * Channel[3], gamma 2.000 [plustek] ---------------------------------- [plustek] sane_start [plustek] usbDev_open(libusb:001:002-04a9-2206-00-00,0x04A9-0x2206) [plustek] Vendor ID=0x04A9, Product ID=0x2206 [plustek] usbio_DetectLM983x [plustek] usbio_DetectLM983x: found LM9832/3 [plustek] Detected vendor & product ID: 0x04A9-0x2206 [plustek] Device description for >0x04A9-0x2206< found. [plustek] usb_initDev(37,0x04a9,37) [plustek] Device WAF: 0x00000006 [plustek] Vendor adjusted to: >Canon< [plustek] LAMP-STATUS: 0x00000000 [plustek] RESETTING REGISTERS(37) [plustek] MISC I/O after RESET: 0x66, 0x16, 0x91 [plustek] usbDev_getCaps() [plustek] scanmode = 3 [plustek] usbDev_getCropInfo() [plustek] usb_GetImageInfo() [plustek] PPL = 248 [plustek] LPA = 150 [plustek] BPL = 744 [plustek] brightness 0, contrast 0 [plustek] usbDev_setScanEnv() [plustek] usb_SaveImageInfo() [plustek] dwFlag = 0x00000400 [plustek] usb_GetImageInfo() [plustek] * Preview Mode NOT set! [plustek] Setting map[0] at 0x000e1094 [plustek] Setting map[1] at 0x000e5094 [plustek] Setting map[2] at 0x000e9094 [plustek] usbDev_startScan() [plustek] * HDPI: 12.000 [plustek] * XDPI=50, HDPI=12.000 [plustek] LAMP-STATUS: 0x00000000 [plustek] Switching Lamp on [plustek] Warmup-Timer started [plustek] LAMP-STATUS: 0x00000001 [plustek] Lamp-Timer stopped [plustek] dwflag = 0x40000400 dwBytesPerLine = 744 [plustek] TIME START [plustek] reader_process started (as thread) [plustek] reader_process:starting to READ data (111600 bytes) [plustek] buf = 0x00294000 [plustek] usbDev_PrepareScan() [plustek] sane_start done [plustek] SETMCLK[7/2], using entry 6: 6.000000, 600 [plustek] SETMCLK[7/2], using entry 0: 6.000000, 50 [plustek] usb_SetScanParameters() [plustek] * HDPI: 1.000 [plustek] * XDPI=600, HDPI=1.000 [plustek] * DataPixelStart=88, LineEnd=5188 [plustek] >> End-Start=5100, HDPI=1.00 [plustek] * Full Steps to Skip at Start = 0x0000 [plustek] usb_GetMCLKDivider() [plustek] * Integration Time Adjust = 0 (HDPI=1.000,MCLKD=6.000) [plustek] * Current MCLK Divider = 6.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x1f [plustek] * PhyBytes = 30606 [plustek] * PhyLines = 1 [plustek] * TotalBytes = 91818 [plustek] * PL=230, coeffsize=192, scaler=3 [plustek] * PauseLimit = 90, [0x4e] = 0x2b, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] usb_ScanBegin() [plustek] usb_IsDataAvailableInDRAM() [plustek] Data is available [plustek] usbDev_ScanEnd(), start=1, park=0 [plustek] usb_SetScanParameters() [plustek] * HDPI: 1.000 [plustek] * XDPI=600, HDPI=1.000 [plustek] * DataPixelStart=88, LineEnd=5188 [plustek] >> End-Start=5100, HDPI=1.00 [plustek] * Full Steps to Skip at Start = 0x0000 [plustek] usb_GetMCLKDivider() [plustek] * Integration Time Adjust = 0 (HDPI=1.000,MCLKD=6.000) [plustek] * Current MCLK Divider = 6.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x1f [plustek] * PhyBytes = 30606 [plustek] * PhyLines = 1 [plustek] * TotalBytes = 91818 [plustek] * PL=230, coeffsize=192, scaler=3 [plustek] * PauseLimit = 90, [0x4e] = 0x2b, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] usb_ScanBegin() [plustek] usb_IsDataAvailableInDRAM() [plustek] Data is available [plustek] usbDev_ScanEnd(), start=1, park=0 [plustek] usb_SetScanParameters() [plustek] * HDPI: 1.000 [plustek] * XDPI=600, HDPI=1.000 [plustek] * DataPixelStart=88, LineEnd=5188 [plustek] >> End-Start=5100, HDPI=1.00 [plustek] * Full Steps to Skip at Start = 0x0000 [plustek] usb_GetMCLKDivider() [plustek] * Integration Time Adjust = 0 (HDPI=1.000,MCLKD=6.000) [plustek] * Current MCLK Divider = 6.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x1f [plustek] * PhyBytes = 30606 [plustek] * PhyLines = 1 [plustek] * TotalBytes = 91818 [plustek] * PL=230, coeffsize=192, scaler=3 [plustek] * PauseLimit = 90, [0x4e] = 0x2b, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] usb_ScanBegin() [plustek] usb_IsDataAvailableInDRAM() [plustek] Data is available [plustek] usbDev_ScanEnd(), start=1, park=0 [plustek] usb_SetScanParameters() [plustek] * HDPI: 1.000 [plustek] * XDPI=600, HDPI=1.000 [plustek] * DataPixelStart=88, LineEnd=5188 [plustek] >> End-Start=5100, HDPI=1.00 [plustek] * Full Steps to Skip at Start = 0x0000 [plustek] usb_GetMCLKDivider() [plustek] * Integration Time Adjust = 0 (HDPI=1.000,MCLKD=6.000) [plustek] * Current MCLK Divider = 6.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x1f [plustek] * PhyBytes = 30606 [plustek] * PhyLines = 1 [plustek] * TotalBytes = 91818 [plustek] * PL=230, coeffsize=192, scaler=3 [plustek] * PauseLimit = 90, [0x4e] = 0x2b, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] usb_ScanBegin() [plustek] usb_IsDataAvailableInDRAM() [plustek] Data is available [plustek] usbDev_ScanEnd(), start=1, park=0 [plustek] usb_SetScanParameters() [plustek] * HDPI: 1.000 [plustek] * XDPI=600, HDPI=1.000 [plustek] * DataPixelStart=88, LineEnd=5188 [plustek] >> End-Start=5100, HDPI=1.00 [plustek] * Full Steps to Skip at Start = 0x0000 [plustek] usb_GetMCLKDivider() [plustek] * Integration Time Adjust = 0 (HDPI=1.000,MCLKD=6.000) [plustek] * Current MCLK Divider = 6.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x1f [plustek] * PhyBytes = 30606 [plustek] * PhyLines = 1 [plustek] * TotalBytes = 91818 [plustek] * PL=230, coeffsize=192, scaler=3 [plustek] * PauseLimit = 90, [0x4e] = 0x2b, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] usb_ScanBegin() [plustek] usb_IsDataAvailableInDRAM() [plustek] Data is available [plustek] usbDev_ScanEnd(), start=1, park=0 [plustek] usb_SetScanParameters() [plustek] * HDPI: 1.000 [plustek] * XDPI=600, HDPI=1.000 [plustek] * DataPixelStart=88, LineEnd=5188 [plustek] >> End-Start=5100, HDPI=1.00 [plustek] * Full Steps to Skip at Start = 0x0000 [plustek] usb_GetMCLKDivider() [plustek] * Integration Time Adjust = 0 (HDPI=1.000,MCLKD=6.000) [plustek] * Current MCLK Divider = 6.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x1f [plustek] * PhyBytes = 30606 [plustek] * PhyLines = 1 [plustek] * TotalBytes = 91818 [plustek] * PL=230, coeffsize=192, scaler=3 [plustek] * PauseLimit = 90, [0x4e] = 0x2b, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] usb_ScanBegin() [plustek] usb_IsDataAvailableInDRAM() [plustek] Data is available [plustek] usbDev_ScanEnd(), start=1, park=0 [plustek] usb_SetScanParameters() [plustek] * HDPI: 1.000 [plustek] * XDPI=600, HDPI=1.000 [plustek] * DataPixelStart=88, LineEnd=5188 [plustek] >> End-Start=5100, HDPI=1.00 [plustek] * Full Steps to Skip at Start = 0x0000 [plustek] usb_GetMCLKDivider() [plustek] * Integration Time Adjust = 0 (HDPI=1.000,MCLKD=6.000) [plustek] * Current MCLK Divider = 6.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x1f [plustek] * PhyBytes = 30606 [plustek] * PhyLines = 1 [plustek] * TotalBytes = 91818 [plustek] * PL=230, coeffsize=192, scaler=3 [plustek] * PauseLimit = 90, [0x4e] = 0x2b, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] usb_ScanBegin() [plustek] usb_IsDataAvailableInDRAM() [plustek] Data is available [plustek] usbDev_ScanEnd(), start=1, park=0 [plustek] usb_SetScanParameters() [plustek] * HDPI: 1.000 [plustek] * XDPI=600, HDPI=1.000 [plustek] * DataPixelStart=88, LineEnd=5188 [plustek] >> End-Start=5100, HDPI=1.00 [plustek] * Full Steps to Skip at Start = 0x0000 [plustek] usb_GetMCLKDivider() [plustek] * Integration Time Adjust = 0 (HDPI=1.000,MCLKD=6.000) [plustek] * Current MCLK Divider = 6.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x1f [plustek] * PhyBytes = 30606 [plustek] * PhyLines = 1 [plustek] * TotalBytes = 91818 [plustek] * PL=230, coeffsize=192, scaler=3 [plustek] * PauseLimit = 90, [0x4e] = 0x2b, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] usb_ScanBegin() [plustek] usb_IsDataAvailableInDRAM() [plustek] Data is available [plustek] usbDev_ScanEnd(), start=1, park=0 [plustek] MOTOR: PWM=0x08, PWM_DUTY=0x33 0x45=0x13 0x48=0x00, 0x49=0xf2 [plustek] MCLK_FFW = 6 --> 0x0a [plustek] usb_SetScanParameters() [plustek] * HDPI: 1.000 [plustek] * XDPI=600, HDPI=1.000 [plustek] * DataPixelStart=0, LineEnd=5100 [plustek] >> End-Start=5100, HDPI=1.00 [plustek] * Full Steps to Skip at Start = 0x0000 [plustek] usb_GetMCLKDivider() [plustek] * Integration Time Adjust = 0 (HDPI=1.000,MCLKD=6.000) [plustek] * Current MCLK Divider = 6.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x1f [plustek] * PhyBytes = 30606 [plustek] * PhyLines = 1 [plustek] * TotalBytes = 91818 [plustek] * PL=230, coeffsize=192, scaler=3 [plustek] * PauseLimit = 90, [0x4e] = 0x2b, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] usb_ScanBegin() [plustek] usb_IsDataAvailableInDRAM() [plustek] Data is available [plustek] usbDev_ScanEnd(), start=1, park=0 [plustek] usb_SetScanParameters() [plustek] * HDPI: 1.000 [plustek] * XDPI=600, HDPI=1.000 [plustek] * DataPixelStart=88, LineEnd=5188 [plustek] >> End-Start=5100, HDPI=1.00 [plustek] * Full Steps to Skip at Start = 0x0000 [plustek] usb_GetMCLKDivider() [plustek] * Integration Time Adjust = 0 (HDPI=1.000,MCLKD=6.000) [plustek] * Current MCLK Divider = 6.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x1f [plustek] * PhyBytes = 30606 [plustek] * PhyLines = 1 [plustek] * TotalBytes = 91818 [plustek] * PL=230, coeffsize=192, scaler=3 [plustek] * PauseLimit = 90, [0x4e] = 0x2b, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] usb_ScanBegin() [plustek] usb_IsDataAvailableInDRAM() [plustek] Data is available [plustek] usbDev_ScanEnd(), start=1, park=0 [plustek] MOTOR: PWM=0x08, PWM_DUTY=0x33 0x45=0x13 0x48=0x00, 0x49=0xf2 [plustek] MCLK_FFW = 6 --> 0x0a [plustek] usb_SetScanParameters() [plustek] * HDPI: 12.000 [plustek] * XDPI=50, HDPI=12.000 [plustek] * DataPixelStart=89, LineEnd=3065 [plustek] * DataPixelStart=90, LineEnd=3066 (ADJ) [plustek] >> End-Start=2976, HDPI=12.00 [plustek] * Full Steps to Skip at Start = 0x0000 [plustek] usb_GetMCLKDivider() [plustek] * Integration Time Adjust = 0 (HDPI=12.000,MCLKD=6.000) [plustek] * Current MCLK Divider = 6.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x1f [plustek] * PhyBytes = 1494 [plustek] * PhyLines = 32 [plustek] * TotalBytes = 143424 [plustek] * PL=315, coeffsize=192, scaler=3 [plustek] * PauseLimit = 141, [0x4e] = 0x44, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] usb_ScanBegin() [plustek] usb_IsDataAvailableInDRAM() [plustek] Data is available [plustek] usbDev_ScanEnd(), start=1, park=0 [plustek] MOTOR: PWM=0x08, PWM_DUTY=0x33 0x45=0x13 0x48=0x00, 0x49=0xf2 [plustek] MCLK_FFW = 6 --> 0x0a [plustek] MOTOR: PWM=0x08, PWM_DUTY=0x33 0x45=0x13 0x48=0x00, 0x49=0xf2 [plustek] MCLK_FFW = 6 --> 0x0a [plustek] usb_SetScanParameters() [plustek] * HDPI: 12.000 [plustek] * XDPI=50, HDPI=12.000 [plustek] * DataPixelStart=89, LineEnd=3065 [plustek] * DataPixelStart=90, LineEnd=3066 (ADJ) [plustek] >> End-Start=2976, HDPI=12.00 [plustek] * Full Steps to Skip at Start = 0x0000 [plustek] usb_GetMCLKDivider() [plustek] * Integration Time Adjust = 0 (HDPI=12.000,MCLKD=6.000) [plustek] * Current MCLK Divider = 6.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x1f [plustek] * PhyBytes = 1494 [plustek] * PhyLines = 32 [plustek] * TotalBytes = 143424 [plustek] * PL=315, coeffsize=192, scaler=3 [plustek] * PauseLimit = 141, [0x4e] = 0x44, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] usb_ScanBegin() [plustek] usb_IsDataAvailableInDRAM() [plustek] Data is available [plustek] usbDev_ScanEnd(), start=1, park=0 [plustek] MOTOR: PWM=0x08, PWM_DUTY=0x33 0x45=0x13 0x48=0x00, 0x49=0xf2 [plustek] MCLK_FFW = 6 --> 0x0a [plustek] cano_DoCalibration() done [plustek] ------------------------- [plustek] Static Gain: [plustek] REG[0x3b] = 1 [plustek] REG[0x3c] = 1 [plustek] REG[0x3d] = 1 [plustek] Static Offset: [plustek] REG[0x38] = 0 [plustek] REG[0x39] = 0 [plustek] REG[0x3a] = 0 [plustek] ------------------------- [plustek] calibration done. [plustek] usb_SetScanParameters() [plustek] * HDPI: 12.000 [plustek] * XDPI=50, HDPI=12.000 [plustek] * DataPixelStart=89, LineEnd=3065 [plustek] * DataPixelStart=90, LineEnd=3066 (ADJ) [plustek] >> End-Start=2976, HDPI=12.00 [plustek] * Full Steps to Skip at Start = 0x0168 [plustek] usb_GetMCLKDivider() [plustek] * Integration Time Adjust = 0 (HDPI=12.000,MCLKD=6.000) [plustek] * Current MCLK Divider = 6.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x1f [plustek] * PhyBytes = 750 [plustek] * PhyLines = 225 [plustek] * TotalBytes = 506250 [plustek] * PL=293, coeffsize=216, scaler=3 [plustek] * PauseLimit = 293, [0x4e] = 0x90, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] ImageProc is: ColorDuplicate8_2 [plustek] usb_ScanBegin() [plustek] usb_MapDownload() [plustek] * brightness = 0 -> 0 [plustek] * contrast = 0 -> 1.000 [plustek] * downloading map 0... [plustek] * downloading map 1... [plustek] * downloading map 2... [plustek] usb_MapDownload() done. [plustek] Downloading 248 pixels [plustek] SampleY Flag set (50 != 75, wSumY=25) [plustek] Reading the data now! [plustek] PhyDpi.x = 50 [plustek] PhyDpi.y = 75 [plustek] UserDpi.x = 50 [plustek] UserDpi.y = 50 [plustek] NumberOfScanBufs = 5592 [plustek] LinesPerScanBufs = 11184 [plustek] dwPhyBytes = 750 [plustek] dwPhyPixels = 248 [plustek] dwTotalBytes = 506250 [plustek] dwPixels = 248 [plustek] dwBytes = 744 [plustek] dwValidPixels = 248 [plustek] dwBytesScanBuf = 1500 [plustek] dwLinesDiscard = 0 [plustek] dwLinesToSkip = 1 [plustek] dwLinesUser = 150 [plustek] dwBytesLine = 744 [plustek] usb_IsDataAvailableInDRAM() [plustek] Data is available [plustek] reader_process: finished reading data
