I'm attempting to get the SANE scanimage v1.0.13 to work with a Canon 1240U scanner under FreeBSD 5.1R.
So far: 1. The SANE backend installed without apparent error from the PORTS collection. 2. The Canon 1240U doesn't appear in the uscanner list of supported devices but does in sane-plustek. 3. sane-find-scanner returns: found USB scanner (vendor=0x04a9, product=0x220e) at libusb:/dev/usb0:/dev/ugen0 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. 4. Added the following to /etc/local/share/plustek.conf [usb] 0x04a9 0x220e device auto (note, I also tried /dev/usb0 and /dev/ugen0 in place of auto) 5. scanimage -L returns: No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). (the scanner is plugged in and turned on) ---Any suggestions? _________________________________________________________________ Get some great ideas here for your sweetheart on Valentine's Day - and beyond. http://special.msn.com/network/celebrateromance.armx
