On ds, 2003-12-20 at 11:25, Henning Meier-Geinitz wrote: > Does it work as root (->permissions)?
Yes I do all from root shell and the permissions are right ! > If it doesn't, try enable debugging and send us the output: > > SANE_DEBUG_HP5400=255 scanimage -L [sanei_debug] Setting debug level of hp5400 to 255. [hp5400] sane_init: SANE hp5400 backend version 1.0-3 (from sane-backends 1.0.13 ) [hp5400] Reading config file [hp5400] Discarding line 1 [hp5400] Discarding line 2 [hp5400] Discarding line 3 [hp5400] Discarding line 4 [hp5400] Trying to attach usb 0x03F0 0x1005 [hp5400] vendor/product 0x03F0-0x1005 opened [hp5400] Read: reqtype = 0xC0, req = 0x04, value = 1200 [hp5400] Read: reqtype = 0xC0, req = 0x04, value = C500 [hp5400] Command 12 verified [hp5400] Sorry, unknown scanner version. Attempted match on : [hp5400] * 'SilitekIBlizd C3 ScannerV0.84' [hp5400] * 'SilitekIBlizd C3 ScannerV0.86' [hp5400] * 'SilitekIBlizd C3 ScannerV0.87' [hp5400] Version is '' [hp5400] attach_one_device: attached /dev/usb/scanner0 successfully [hp5400] hp5400_open: open returned Device busy [hp5400] hp5400_open failed [hp5400] attach_one_device: couldn't attach libusb:001:002 [hp5400] Discarding line 6 [hp5400] Discarding line 7 [hp5400] Discarding line 8 [hp5400] Discarding line 9 [hp5400] Discarding line 10 [hp5400] Discarding line 11 [hp5400] Discarding line 12 [hp5400] Discarding line 13 [hp5400] Discarding line 14 [hp5400] Discarding line 15 [hp5400] sane_get_devices No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [hp5400] sane_exit ========================== Hei !! Now I remind that few month ago I edit a little part of the source code for this error, I don't know what pice of code was and If now can do this without recompile it ! Thanks.. -- Lluis Pamies i Juarez GPG ID: 144D6FBF
