Hi everybody. I've a scanjet 5400c scanner, and I'm using Debian. Few months ago I had the backend (hp5400) working fine, but now I can't do that.
This are tha package that I've installed: ii libsane 1.0.13-2 ii sane 1.0.11-3 ii sane-utils 1.0.13-2 ii xsane 0.91-6 In the /etc/sane.d/dll.conf I anly have one line : hp5400 And in /etc/sane.d/hp5400.conf : (only ane line too) usb 0x03F0 0x1005 The utility "sane-find-scanner" return me this : found USB scanner (vendor=0x03f0, product=0x1005) at /dev/usb/scanner0 found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1005 [HP Scanjet 5400C Series]) at libusb:001:002 And scanimage -L : #scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). And if I do #cat /proc/bus/usb/devices : T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03f0 ProdID=1005 Rev= 0.00 S: Manufacturer=Hewlett-Packard S: Product=HP Scanjet 5400C Series S: SerialNumber=CN1651F0V1ST C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 48mA I: If#= 0 Alt= 0 #EPs= 3 Cls=10(unk. ) Sub=01 Prot=00 Driver=usbscanner E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=10ms I'm doing somthing bad but can't see what ! PS: Sorry for my poor english. -- Lluis Pamies i Juarez GPG ID: 144D6FBF
