On Tue, 2004-01-13 at 11:54, Olaf Meeuwissen wrote: > I meant to write -L, not ->, up there but I think you figured that > much.
yep! Got it this time, > > > Same old, same old. > > I just get No scanners were identified. > > Did you also update the firmware line near the top of snapscan.conf. > Note that it can only handle *one* such line. If you dumped your > esfw3e.bin in /usr/local/share, you should have > > firmware /usr/local/share/esfw3e.bin Yes. /home/gough/download/ESFW3E.BIN that's where it is > No, don't. If you don't want SANE to try all the backends installed, > comment out the ones you don't want in dll.conf. So if you only want > to try the snapscan backend, comment out all the others. OK, I'll try that tonight. > > You should be using "usb 0x04b8 0x0120". That is assuming the USB > product ID is 0x0120 (I don't remember off the top of my head). Yes. as reported by lsusb, and sane-find-scanner. That's what I've been using. So it's a dead-end then? Julian
