Hi.
thanks for all the info. Currenly the paid work and my study are
keeping be busy. I'll have a close look during the weekend ...
On: Thu, 10 Apr 2003 20:37:55 +0200 (CEST),
Ondrej Koala Vacha <ko...@fi.muni.cz> wrote:
> On Tue, 8 Apr 2003, Henning Meier-Geinitz wrote:
> =
> > Is the scanner listed in /proc/bus/usb/devices? If not, something w=
ith
> > your kernel USB system is wrong (wrong driver?).
> =
> Yes, it's:
> =
> # cat /proc/bus/usb/devices
> ..
> P: Vendor=3D03f0 ProdID=3D0801 Rev=3D 0.01
> S: Manufacturer=3Dhp
> S: Product=3Dhp scanjet 7400c
> S: SerialNumber=3DSCN227S0199LZ =
> C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 2mA
> I: If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 Dr=
iver=3D(none)
> E: Ad=3D01(O) Atr=3D02(Bulk) MxPS=3D 8 Ivl=3D0ms
> E: Ad=3D82(I) Atr=3D03(Int.) MxPS=3D 8 Ivl=3D10ms
> E: Ad=3D83(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D01 Cnt=3D02 Dev#=3D 3 Spd=3D1=
2 MxCh=3D 0
> D: Ver=3D 1.10 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff MxPS=3D64 #Cfgs=3D=
1
> ..
> =
> # mount
> ...
> none on /proc/bus/usb type usbdevfs (rw)
> =
> =
> > =
> > If yes, does sane-find-scanner find the scanner? =
> =
> No.
> =
> > If it's not found
> > even as root, you may not have libusb-0.1.6 or newer. When you buil=
d
> =
> I have installed libusb-0.1.7
> =
> > sane, configure prints a line like this "Libs=3D-lusb ...". If the =
-lusb
> =
> =
> Yes, I have LIBS=3D'-lusb -lnsl -lm -ljpeg' in my config.log
> =
> =
> regards
- Ren=E9
-- =
Ren=E9 Rebe - Europe/Germany/Berlin
e-mail: r...@rocklinux.org, rene.r...@gmx.net
web: http://www.rocklinux.org/people/rene http://gsmp.tfh-berlin.d=
e/rene/
Anyone sending unwanted advertising e-mail to this address will be
charged $25 for network traffic and computing time. By extracting my
address from this message or its header, you agree to these terms.
